Bedienungsanleitung AEG ARE I2

33 Seiten 0.34 mb
Download

Zur Seite of 33

Summary
  • AEG ARE I2 - page 1

    Manual Compact Reader ARE I2 Installation Guide for Systems with a Serial Interface (RS 232) ...

  • AEG ARE I2 - page 2

    Manual Page 2 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de Contents 1 INTRODUCTION 5 2 SYSTEM OVERVIEW 5 3 START-UP PROCEDURE 6 4 INSTALLATION 7 4.1 Mounting of the Housing 7 4.2 Grounding of the ...

  • AEG ARE I2 - page 3

    Manual Page 3 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 6.7 BD- Baudrate 19 6.8 TOR – Maximum Reading Time 20 6.9 VS- Show Parameter 20 6.10 VSAVE – Save Parameter 20 7 OPERATING MODES OF ...

  • AEG ARE I2 - page 4

    Manual Page 4 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de ...

  • AEG ARE I2 - page 5

    Manual Page 5 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 1 Intr oduction This document will describe the components of the Com pact Reader System ARE I2 / RS 232 and the procedure how to do the ...

  • AEG ARE I2 - page 6

    Manual Page 6 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de The connection of the cables (power supply and da ta transfer) is done inside of the connection cab (SAB Cab). Together with an sealing ...

  • AEG ARE I2 - page 7

    Manual Page 7 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 4 Installation To get the specified reading performance it is necessary to do the installation carefully step by step as it is described ...

  • AEG ARE I2 - page 8

    Manual Page 8 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de Inside of the SAB Cap there are the pins of following connections: • power supply • data link to the serial interface RS232 The code ...

  • AEG ARE I2 - page 9

    Manual Page 9 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 3 4 5 1 6 Cable 7 4.3.3 Mounting of the Power Supply Cable The power supply cable must be mounted in following steps: • Remove all inn ...

  • AEG ARE I2 - page 10

    Manual Page 10 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 4.3.4 Assembling of the Power Supply and Data Cable (Single Cable Pipe) The connection of the cable is also done inside of the SAB Cab. ...

  • AEG ARE I2 - page 11

    Manual Page 11 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 4.3.5 Final Assembly of the Cable Pipe • Pull by and by all the cable back, until the isolation of the cables are near to beginning o ...

  • AEG ARE I2 - page 12

    Manual Page 12 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 4.3.7 Using the Service Cable ID 70213 Using the Service Cable, no special assembly work inside of the SAB Cab has be done by the custo ...

  • AEG ARE I2 - page 13

    Manual Page 13 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 4.3.8 Using the Power Supply and Data Cable ID 70212 Using the Power Supply and Data Cable, no special assembly work inside of the SAB ...

  • AEG ARE I2 - page 14

    Manual Page 14 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de BFH ID Moderne elektronische Objekterkennung und Verfolgung L 1 L2 L4 L3 L5 ARE I2 5 V isual Signal Lamps To show the operational state ...

  • AEG ARE I2 - page 15

    Manual Page 15 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 6 Settings of the Reader / Most Important Parameters The default value of the opera ting mode parameter is 2.. • MD 2 triggered by an ...

  • AEG ARE I2 - page 16

    Manual Page 16 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de After entering a valid command together with a param eter value, the system answers by sending the parameter value and <CR>. Exam ...

  • AEG ARE I2 - page 17

    Manual Page 17 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de Input format: CID <SP> parameter <CR> Parameter: Value Function 0 no filter function , (default value) 1 suppression of rep ...

  • AEG ARE I2 - page 18

    Manual Page 18 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 0 one out of one (no effect) 1 two out of two ; (default value) Output (example): 1 <CR> Sequence of readings Length of the readi ...

  • AEG ARE I2 - page 19

    Manual Page 19 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 6.6 EC- Echo The command EC changes of the echo function setting. Input format: EC <SP> parameter <CR> Parameter: v Functio ...

  • AEG ARE I2 - page 20

    Manual Page 20 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 6.8 T OR – Maximum Reading T ime Timeout for the reader. TOR is used in operation mode 2 as maxim um gating time for a reading proces ...

  • AEG ARE I2 - page 21

    Manual Page 21 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 7 Operating Modes of the Reader There are two operational modes defined: • Mode 2 The reading process is triggered by an software com ...

  • AEG ARE I2 - page 22

    Manual Page 22 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de Figure 7.1.2 : Software triggered r eading operation with TOR>0 Please note : The TOR parameter is only active, if the GT-Command is ...

  • AEG ARE I2 - page 23

    Manual Page 23 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 7.1.2 Basic Data Exchange Process The master has to send an software comm and to start an read or write process of the reader. After do ...

  • AEG ARE I2 - page 24

    Manual Page 24 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 7.1.4.2 Selective Read RD • Start the reader with the command RD plus Param eters ( plus <CR>). see example below. - You can re ...

  • AEG ARE I2 - page 25

    Manual Page 25 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de • Wait for the answer • Analyse the received answer: 3 characters plus <CR>. < ACK > < CR > Writing process was s ...

  • AEG ARE I2 - page 26

    Manual Page 26 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 7.2 Operating Mode 0 - Continuous Reading When operating continuously the exciter is switched on permanently. The reading cycles are in ...

  • AEG ARE I2 - page 27

    Manual Page 27 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de • NID 1 failure protection.; selecti on guide 2 out 2 transponder codes The result of the reading process may also seen at the LED’ ...

  • AEG ARE I2 - page 28

    Manual Page 28 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 8 Instructions 8.1 General Instructions To avoid any reduction of the reading distance of the reader, the housing must not be brought n ...

  • AEG ARE I2 - page 29

    Manual Page 29 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 8.2 Special Instructions for Using a Read / Write System To transfer the data to the transponder or to control the selective read proce ...

  • AEG ARE I2 - page 30

    Manual Page 30 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 9 Hotline If there are questions or suggestions please be so free an phone: Fax: ++49 (0)731-933-1855 e-mail: info@aegid.de http: www. ...

  • AEG ARE I2 - page 31

    Manual Page 31 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 12 Appendix 12.1 Best Orientation for an F-Type -Reader Compact Reader ARE I2 Internal Antenna F-Typ 1 1 0 2 0 3 0 8 0 1 0 2 0 3 0 5 1 ...

  • AEG ARE I2 - page 32

    Manual Page 32 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 12.2 Best Orientation for an L-Type -Reader Compact Reader ARE I2 Internal Antenna L-Typ Bauteilname 1 1 0 2 0 3 0 8 0 1 0 2 0 3 0 5 1 ...

  • AEG ARE I2 - page 33

    Manual Page 33 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 12.3 Assembling of the SAB Cab ...

Produzent AEG Kategorie Computer Hardware

Dokumente, die wir vom Produzenten des Geräts AEG ARE I2 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen AEG
- Bedienungsanleitungen ARE I2
- Produktkarten AEG
- Informationsbroschüren
- oder Energieetiketten AEG ARE I2
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung AEG ARE I2.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen AEG ARE I2, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen AEG ARE I2. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts AEG ARE I2 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts AEG ARE I2, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von AEG ARE I2 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von AEG ARE I2 verständlich ist.

Eine gänzliche Bedienungsanleitung von AEG sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von AEG ARE I2 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von AEG ARE I2 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich AEG ARE I2, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts AEG ARE I2 - die uns die ersten Schritte während der Nutzung von AEG ARE I2 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit AEG ARE I2 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von AEG ARE I2 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich AEG ARE I2?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit AEG ARE I2 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit AEG ARE I2 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)