Bedienungsanleitung Agilent Technologies 6000 Series

368 Seiten 8.13 mb
Download

Zur Seite of 368

Summary
  • Agilent Technologies 6000 Series - page 1

    Agilent T echnologies Agilent InfiniiV ision 6000 Series Oscilloscopes User’ s Guide ...

  • Agilent Technologies 6000 Series - page 2

    6000 Series Oscilloscope User’s Guide Notices © Agilent T echnologies, Inc. 2005-2008 N o p a rt o f t h i s m a n u a l m a y be r e p r o d u c e d i n any form or by any means (including elec- tronic storage and retrieval or translation into a foreign language) without prior agree- ment and written consen t from Agilent T echnologies, Inc . a ...

  • Agilent Technologies 6000 Series - page 3

    6000 Series Oscilloscope User’s Guide 3 In This User’ s Guide… This guide shows y ou how to use the A gilent Inf iniiVision 6000 Series oscilloscopes. It cont ains the follo wing chapters and topi cs: 1G e t t i n g S t a r t e d U npacking and setting up your oscilloscope, using Quick Help. 2 Front-Panel Controls A quick o verview of the fro ...

  • Agilent Technologies 6000 Series - page 4

    4 6000 Series Oscilloscope User’s Guide The Agilent In finiiVision 6000 Series oscilloscope s deliver po werful features and high per f or mance: • 100 MHz, 300 MHz, 500 MHz, and 1 GHz bandwidth models. • U p to 4 GSa /s sa mp le r ate. • P o werful triggering includi ng analog HDT V , I 2 C, SPI, LIN, CAN , an d US B . • USB, L AN, and G ...

  • Agilent Technologies 6000 Series - page 5

    6000 Series Oscilloscope User’s Guide 5 Ta b l e 1 Model Numbers, Bandwidths, and Sampling Rates Bandwidth 100 MHz 300 MHz 500 MHz 1 GHz Maximum Sample Rate 2 G Sa/s 2 GSa/s 4 GSa/s 4 GSa/s 2-Channel + 16 Logic Channels MSO MSO6012A MSO6032A MSO605 2A MSO6102A 4-Channel + 16 Logic Channels MSO MSO6014A MSO6034A MSO605 4A MSO6104A 2-Channel D SO D ...

  • Agilent Technologies 6000 Series - page 6

    6 6000 Series Oscilloscope User’s Guide Memor y upg rades can be easily inst alled without retur ning t he oscilloscope to a S ervice Center . These upg rades are licensed. The foll owing options can be easi ly installed without retur ning the oscillo scope to a Servi ce Center . These upgrad es are licensed. Ta b l e 3 Memory Depth Option Number ...

  • Agilent Technologies 6000 Series - page 7

    6000 Series Oscilloscope User’s Guide 7 The follo wing option cannot be inst alled aft er time of purchase. Vis it www .agilent.com/find/mso6000 to view the 6000A Series and 6000L Se ries data sheets. Ta b l e 5 Order-Only Options Licensed Option Order Battery Operation (Option BA T) Availa ble at time of pur chase. Option can not be added after ...

  • Agilent Technologies 6000 Series - page 8

    8 6000 Series Oscilloscope User’s Guide Built-in Quick Help A Quick Help system is bu ilt into the oscilloscope. Instructions for u sing the quick help system are given on page 58 . Digital Channels Because all of the oscilloscop es in the Agilent 6000 Seri es have analog channels, the analog channel topics in th is book apply to all i nstruments ...

  • Agilent Technologies 6000 Series - page 9

    6000 Series Oscilloscope User’s Guide 9 Contents 1 Getting Started 19 T o inspect packa ge contents 22 T o adjust the 6000A Series handle 28 T o mount the oscilloscope in a rack 29 T o mount the 6000A Series oscilloscope in a rack 29 T o mount the 6000L Series oscilloscope in a rack 29 V entilation requirements 32 T o power-on the oscilloscope 33 ...

  • Agilent Technologies 6000 Series - page 10

    10 6000 Series Oscilloscope User’s Guide Contents Maximum input voltage for anal og inputs 52 T o verify basic oscilloscope operation 52 T o compensate the oscilloscope probes 54 T o calibrate the probes 55 Passive Probes Supported 55 Active Probes Supported 56 By 300 MHz, 500 MHz, and 1 GHz Bandwidth Models 56 By 100 MHz Bandwidth Models 57 Usin ...

  • Agilent Technologies 6000 Series - page 11

    Contents 6000 Series Oscilloscope User’s Guide 11 6000A Series Front-Panel Operation 76 T o adjust the waveform intensity 76 T o adjust the display g rid (graticule) intensity 76 T o start and stop an acquisition 77 T o make a single acquisition 78 T o pan and zoom 79 Choosing Auto trigger mode or Normal trigger mode 80 Using AutoScale 80 T o set ...

  • Agilent Technologies 6000 Series - page 12

    12 6000 Series Oscilloscope User’s Guide Contents Interpreting the digital waveform display 118 T o switch all digital channels on or off 119 T o switch groups of channels on or off 119 T o switch a single channel on or off 119 T o change the displayed size of the digital channels 120 T o reposition a digital channel 120 T o change the logic thre ...

  • Agilent Technologies 6000 Series - page 13

    Contents 6000 Series Oscilloscope User’s Guide 13 T o use Pulse Width triggering 142 < qualifier time set softkey 144 > qualifier time set softkey 144 T o use Pattern triggering 145 Hex Bus Pattern T riggering 147 T o use CAN triggering 148 T o use Duration triggering 152 < qualifier time set softkey 154 > qualifier time set softkey 1 ...

  • Agilent Technologies 6000 Series - page 14

    14 6000 Series Oscilloscope User’s Guide Contents T o use TV triggering 187 Example exercises 191 T o trigger on a specific line of video 191 T o trigger on all sync pulses 193 T o trigger on a specific field of the video signal 194 T o trigger on all fields of the video signal 195 T o trigger on odd or even fields 196 T o use UART/RS232 triggeri ...

  • Agilent Technologies 6000 Series - page 15

    Contents 6000 Series Oscilloscope User’s Guide 15 Automatic Measurements 239 T o make an automat ic measurement 240 T o set measurement thresholds 241 Tim e M e as ur e me nt s 243 Delay and Phase Measurements 247 V oltage Measurements 249 Overshoot and Preshoot Measurements 255 6 Displaying Data 257 Pan and Zoom 258 T o pan and zoom a waveform 2 ...

  • Agilent Technologies 6000 Series - page 16

    16 6000 Series Oscilloscope User’s Guide Contents Using Serial Decode 271 To d e c o d e I 2 C data 272 T o decode SPI data 276 T o decode CAN data 281 CAN T otalizer 286 T o decode LIN data 288 T o decode FlexRay data 294 FlexRay T otalizer 298 T o decode UART/RS232 data 300 UART/RS232 T otalizer 306 T o reduce the random noise on a signal 307 H ...

  • Agilent Technologies 6000 Series - page 17

    Contents 6000 Series Oscilloscope User’s Guide 17 Saving oscilloscope data 320 Selecting a destination for your saved data 321 Selecting a file name 322 W aveform T race and Oscilloscope Setup 324 Display Image and Waveform Data Files 324 Choosing save settings 325 T o save a waveform and/or set up to a USB device 327 T o save a wa veform and/or ...

  • Agilent Technologies 6000 Series - page 18

    18 6000 Series Oscilloscope User’s Guide Contents Digital channel signal fidelity: Probe im pedance and grounding 340 Input Impedance 340 Probe Grounding 342 Best Probing Practices 344 T o replace digital prob e leads 345 Binary Data (.bin) 346 Binary Data in MA TLAB 346 Binary Header Format 346 Example Program for Readi ng Binary Data 350 Exampl ...

  • Agilent Technologies 6000 Series - page 19

    19 Agilent 6000 Series Oscilloscope User’s Guide  A 1 Getting Started T o inspect package contents 22 T o adjust the 6000A Series handle 28 T o mount the oscilloscope in a rack 29 T o power-on the oscilloscope 33 V entilation requirements 32 The remote interface 38 T o establish a LAN connection (6000A Series) 39 T o establish a LAN connection ...

  • Agilent Technologies 6000 Series - page 20

    20 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d ✔ V erify basic oscilloscope operation and compensate t he probes. ...

  • Agilent Technologies 6000 Series - page 21

    Getting Started 1 6000 Series Oscilloscope User’s Guide 21 Built-in Quick Help A Quick Help system is bu ilt into the oscilloscope. Instructions for u sing the quick help system are given on page 58 . Digital Channels Because all of the oscilloscop es in the Agilent 6000 Seri es have analog channels, the analog channel topics in th is book apply ...

  • Agilent Technologies 6000 Series - page 22

    22 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d T o inspect package contents ✔ Inspect the shipping cont ainer for damage. If y our s hipping container appe ar s to be damaged, keep the shipping container or cus hioning material until you ha ve inspected the cont ents of the shipment f or completeness and hav e checked the ...

  • Agilent Technologies 6000 Series - page 23

    Getting Started 1 6000 Series Oscilloscope User’s Guide 23 Figure 1 Package contents for 6000A Seri es AC-powered oscilloscopes Power cord (Part numbers given on page 37 ) *Digital Probe Kit contains: 54620-61801 16-channel cable (qty 1) 5959-9334 2-inch pr ob e ground leads (qty 5) 5090-4833 Grabber ( qty 20) Digital probe replacement parts are ...

  • Agilent Technologies 6000 Series - page 24

    24 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d Figure 2 Package contents for 6000A S eries batt ery-powered oscilloscopes (Option BA T) AC/DC power adapter Front-panel cover 6000A Series Option BA T Oscilloscope Power cord (see Power Cords table) Oscilloscope probes 10073C or 10074C (Qty 2 or 4) Manuals and CD-ROMs Digital ...

  • Agilent Technologies 6000 Series - page 25

    Getting Started 1 6000 Series Oscilloscope User’s Guide 25 Figure 3 Package contents for 6000L S eries oscilloscopes 6000L Series Oscilloscope Manuals and CD-RO Ms Oscilloscope Probes 10073C or 10074C Qty. 4 Power cord (Part numbers given on page 37 ) 50 ohm feedthrough termination ad apter P/N 0960-030 1, Qty. 4 GPIB cable extender P/N 5183-080 ...

  • Agilent Technologies 6000 Series - page 26

    26 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d Ta b l e 6 Accessories availabl e Model Description N2918A 6000 Series Osci lloscope Eval uation Kit 1180CZ T estmobile oscilloscope car t (requires N291 9A adapter ki t) N2919A T estmobile Adapter Kit N2916A 6000A Rackmount K it 54684-4410 1 Front-pane l cover N2605A -097 USB ...

  • Agilent Technologies 6000 Series - page 27

    Getting Started 1 6000 Series Oscilloscope User’s Guide 27 F or information on more probes and accessories see “5989-6162EN Probes and A ccessories Selection Guide” and “5968-8153EN 5000 and 6000 Series Oscilloscope Probes and Ac cessories dat a sheet, available at www .agilent.com. N2782A Current probe, 50 MHz , 30 A, AC/DC (use with N2779 ...

  • Agilent Technologies 6000 Series - page 28

    28 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d T o adjust the 6000A Series handle Y ou can use t he oscilloscope’s handle f or carr ying the instrument, or you can use it as a st and to tilt the ins trument up f or easi er viewin g of its displa y. 1 Grasp the handle hubs on each sid e of the instru ment and pull the hubs ...

  • Agilent Technologies 6000 Series - page 29

    Getting Started 1 6000 Series Oscilloscope User’s Guide 29 T o mount the oscilloscope in a rack The InfiniiVision 6000 Series osci lloscopes can be mounted into Electronic Industries As sociation (EIA) standard 19-inch (487-mm) rack cabinets. T o mount the 6000A Series oscilloscope in a rack Purchase and install the N2916A rack mount kit. Instru ...

  • Agilent Technologies 6000 Series - page 30

    30 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d 1 Loo sel y at tach the Fron t Exte nder Supp orts to th e Rea r Extender Supports wit h f our (4) clip-nuts and four (4) of the 10-32 x 0.375 Rail Screws. (The scre ws require a Torx T20 driver .) Choose t he correct set of slots in t he supports such that their overall length ...

  • Agilent Technologies 6000 Series - page 31

    Getting Started 1 6000 Series Oscilloscope User’s Guide 31 2 Fasten the R ack Mount Extenders to t he oscilloscope chassis with t he fo ur (4) M3 x 6 mm screws, using a T or x T10 driver as f ollows: a Attach a Rack Mount Ext ender to t he left side of t he oscilloscope using tw o (2) of t he M3 x 6 mm screws in the inner set of holes on t he Rac ...

  • Agilent Technologies 6000 Series - page 32

    32 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d Extenders to the rack using the four (4) remaini ng 10-32 x 0.375 Rail Screws. Use the T or x T20 driver . 5 Se cure ly attach the R ear E xten der S upp orts to th e Fr ont Extender Suppor ts by tightening the four (4) 10-32 x 0.375 Rail Screws scre ws t hat y ou loosely attac ...

  • Agilent Technologies 6000 Series - page 33

    Getting Started 1 6000 Series Oscilloscope User’s Guide 33 T o power-on the oscilloscope AC-Powered 6000 Series 1 Con nec t the po wer cor d to th e rea r of th e osc ill osco pe, then to a suit able A C voltage source. The oscilloscope automatically adjusts f or input line voltages in the range 100 to 240 V A C. Ensure that you ha ve the corr ec ...

  • Agilent Technologies 6000 Series - page 34

    34 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d The 6000A Series Option BA T oscilloscopes are batter y po wered. They ha ve additional LED indicators on t he front panel: Batter y life is appr oximately 1.7 5 hours, depending on the oscilloscope configuration. Operating with the Internal Battery When operating wit h the int ...

  • Agilent Technologies 6000 Series - page 35

    Getting Started 1 6000 Series Oscilloscope User’s Guide 35 3 Press the pow er switch. The po wer switch is located on t he lo wer left corner of t he front panel. Some front panel lights will come on and the oscilloscope will be operational in a fe w seconds. Figure 5 Ground post on rear panel Ground Post ...

  • Agilent Technologies 6000 Series - page 36

    36 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d Charging the Battery When charging the batter y , the operating temperature should b e in the rang e from 0 ° C to 45 ° C, ≤ 80% relativ e humidity. 1 Con nec t the s uppl ied A C ada pter to the b ack o f the oscilloscope, and connect the adapt er’s po wer cord to a suit ...

  • Agilent Technologies 6000 Series - page 37

    Getting Started 1 6000 Series Oscilloscope User’s Guide 37 Ta b l e 8 Power Cords Plug T ype Cable Part Nu mber Plug T ype Cable Part Number Opt 900 (U.K .) 8121-1579 Opt 918 (Japan) 8121-1603 Opt 901 (Austral ia) 8121-1 581 Opt 919 (Is rael) 8121-1662 Opt 902 (Europ e) 8121-1580 Opt 920 (Arg entina) 8121-1599 Opt 903 (U.S. A.) 8121-1609 O pt 921 ...

  • Agilent Technologies 6000 Series - page 38

    38 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d The remote interface Y ou can communicate wit h all InfiniiVision 6000 Series oscilloscopes via L AN, US B, or GPIB. 6000A Series oscilloscopes can also be controlled using the front panel k eys. The 6000L Series oscilloscopes do not hav e a ke yboard or displa y , so communica ...

  • Agilent Technologies 6000 Series - page 39

    Getting Started 1 6000 Series Oscilloscope User’s Guide 39 T o establish a LAN conne ction (6000A Series) 1 If the controller PC isn’t already connected to t he local area network (LAN), do that f irst. 2 Get the oscilloscope’s netw ork parameters (hostname, domain, IP address, subnet mask, gateway IP , DNS IP , et c.) from y our network admi ...

  • Agilent Technologies 6000 Series - page 40

    40 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d T o establish a LAN connection (6000L Series) 1 Connect a cable from your site Local Area Netw ork (L AN) to the LAN port on the re ar pa nel of the osci llos cop e. 2 Switch o n the oscilloscope po wer . When the L AN indicat or illuminates g reen, the L AN is connected as con ...

  • Agilent Technologies 6000 Series - page 41

    Getting Started 1 6000 Series Oscilloscope User’s Guide 41 F or mor e inf or mation about connecti ng to t he oscilloscope, refer to the Ag ilent Technologies US B/LAN/GPIB Interfaces Connectivity Guide . F or a print able electronic copy of the Connectivity Guide, direct your W eb bro wser to www .agilent.com and sear ch for Connectivity Guide. ...

  • Agilent Technologies 6000 Series - page 42

    42 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d T o establish a point-to-point LAN connection Stand-alone connection to a PC The follo wing procedure describes how to est ablish a point-to-point (st and alone) conne ct ion to the os cil losc ope . Thi s is useful if y ou want t o control the oscilloscope using a lapt op comp ...

  • Agilent Technologies 6000 Series - page 43

    Getting Started 1 6000 Series Oscilloscope User’s Guide 43 11 When the instrument is found, select OK and OK to clo se the Add Instrument windo ws. No w the instr ument is connected and the instr ument’s W eb inter face may be used. T o use the W eb interface All Infini iVision 6000 Series oscilloscopes include a built-in W eb server (requires ...

  • Agilent Technologies 6000 Series - page 44

    44 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d Controlling the oscilloscop e using a W eb browser A built-in W eb server allo ws communication and control via a Java™-enabled W eb bro wser . Measurements can be set up, wav eforms can be monitored, sc reen images can be captured, and the oscillosc ope can be operated rem o ...

  • Agilent Technologies 6000 Series - page 45

    Getting Started 1 6000 Series Oscilloscope User’s Guide 45 possible to use a point-to-point connection (see page 42 ), but using a LAN is t he pref erred method. 2 T ype the oscilloscope’s hostname or IP address in t he web bro wser . 3 When the osci lloscope’s W eb page is display ed, select Browser Web Control , then select Remote Front Pan ...

  • Agilent Technologies 6000 Series - page 46

    46 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d Setting a password Whenever y ou connect t he oscilloscope t o a LA N, it is good pra cti ce to s et a pass w ord to pr ev ent unau thori zed acce ss to the oscilloscope via W eb br owser . 1 Select the Con figure Network tab from the instr ument’s We l c o m e p a g e . Step ...

  • Agilent Technologies 6000 Series - page 47

    Getting Started 1 6000 Series Oscilloscope User’s Guide 47 2 Select the Mo dify Configuratio n button. 3 Enter your desired passw ord, and click Apply Changes . 4 T o reset t he passw ord: • 6000A Series oscillo scopes - Press Utility & I/O & LAN Reset . • 6000L Series oscillos copes - Press the LAN RESET butt on on the front panel. S ...

  • Agilent Technologies 6000 Series - page 48

    48 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d Function Keys Softkeys Hint appears when you roll over with mouse Main Menu (Left-click to select, Right- click for Quick Help ...

  • Agilent Technologies 6000 Series - page 49

    Getting Started 1 6000 Series Oscilloscope User’s Guide 49 Scrolling and Monitor Resolution When using a monitor resolution of 1024 x 7 68 or less on t he re mote c omp uter , y ou n eed to scr oll to acc ess the fu ll re mote front panel. T o display the re mote front panel without scroll bars, use a monitor resolution g reater than 1024 x 768 o ...

  • Agilent Technologies 6000 Series - page 50

    50 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d Printing the oscilloscope’ s display from a web browser T o print t he oscilloscope’s display fr om a web bro wser: 1 Est ablish a connection to t he oscilloscope as described in thi s cha pter a nd go to the o sci llos cope ’s W elc ome page . 2 Select the Get Image tab ...

  • Agilent Technologies 6000 Series - page 51

    Getting Started 1 6000 Series Oscilloscope User’s Guide 51 T o connect the oscilloscope probes The analog input im pedance of t he 100 MHz oscilloscopes is fix e d at 1 M Ω . The 1 M Ω mode is for use with man y passive probes and f or general purpose measurements. The high impedance minimizes th e loading effect of the oscilloscope on the c ...

  • Agilent Technologies 6000 Series - page 52

    52 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d T o verify basic oscilloscope operation If y ou have a 6000L Series oscilloscope, y ou will need to st art a W eb contr ol session, as described on page 44 . 1 Press the Save/Recall ke y on t he front panel, the n press the Default Setup softkey. (The softke ys are located dire ...

  • Agilent Technologies 6000 Series - page 53

    Getting Started 1 6000 Series Oscilloscope User’s Guide 53 5 Y ou should see a wavef orm on t he oscilloscope’s display similar to t his: If y ou se e the wavef orm, but t he square wav e is not s haped correctly as sho wn abo ve, perform the procedure “T o compensate t he oscilloscope probes” on page 54. If y ou d o not see the wav eform, ...

  • Agilent Technologies 6000 Series - page 54

    54 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d T o compensate the oscilloscope probes Y ou s houl d com pe nsate yo ur os cill osc ope pr ob es to ma tch the ir characteristics t o the o scilloscope’s channels. A poorly compensated probe can introduce measuremen t errors. 1 P er form the procedure “T o verify basic osci ...

  • Agilent Technologies 6000 Series - page 55

    Getting Started 1 6000 Series Oscilloscope User’s Guide 55 T o calibrate the probes The oscilloscope can accurately calibrate its analog oscilloscope channels to cer tain active probes, such as InfiniiMax probes. Other probes, such as the 10073C and 1007 4C passiv e probes, do not require calibration. The Calibrat e Probe softkey will be grayed-o ...

  • Agilent Technologies 6000 Series - page 56

    56 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d Active Probes Supported By 300 MHz, 500 MHz, and 1 GHz Bandwidth Models Ac tive probes that do not ha ve their o wn external pow er supply re quir e sub stanti al p o we r fr om the Au toPr obe interf ace. (The AutoProbe interface is present on t he 300 MHz, 500 MHz, and 1 GHz ...

  • Agilent Technologies 6000 Series - page 57

    Getting Started 1 6000 Series Oscilloscope User’s Guide 57 By 100 MHz Bandwidth Models The foll owing activ e probes use their own po w er supply. Theref ore, t hey can be used on all 6000 Series oscilloscopes, including the 100 MHz bandwidt h models. Ma ny a ct i ve p rob es h ave a 50 Ω output impedance. The in put impedance of 6000 Series 10 ...

  • Agilent Technologies 6000 Series - page 58

    58 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d Using Quick Help T o view Quick Help on 6000L Series oscilloscopes: Star t a W eb br owser control session as described on page 44 and select Remote F ront P anel. To vie w Quic k Help information, right-click on the softkey. Help is not a vailable f or front panel key s; on ly ...

  • Agilent Technologies 6000 Series - page 59

    Getting Started 1 6000 Series Oscilloscope User’s Guide 59 Quick Help Languages At the time this manual was published, Quick Help was available in English, S implified Chinese, Japanese, Ger man, Fre nch , a nd R uss ian . T o choose a Quick Help language in t he oscilloscope: 1 Press Utility , then press the Lan guage softke y. 2 Repeatedly pres ...

  • Agilent Technologies 6000 Series - page 60

    60 6000 Series Oscilloscope User’s Guide 1G e t t i n g S t a r t e d ...

  • Agilent Technologies 6000 Series - page 61

    61 Agilent T echnologies Agilent 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls 6000L Series Oscilloscope Controls 62 6000A Series Oscillosco pe Front-Panel Controls 66 6000A Series Front-Panel Operation 76 ...

  • Agilent Technologies 6000 Series - page 62

    62 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls 6000L Series Oscilloscope Controls The 6000L Series oscilloscope is designed to be remote ly controlled. Theref ore the front panel la yout is sim ple. Front Panel Rear Panel 5 Intensity Control 1 Power Switch 2 Power Indicator 3 LAN Status Indicator 6 USB Port 7 Probe Comp Terminals ...

  • Agilent Technologies 6000 Series - page 63

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 63 Front and Rear Panel Controls and Connectors 1. Power Switch Press once to swit ch po wer on; press again to switch pow er of f. See page 33 . 2. Power Indicator Illuminates g reen when po wer is on. 3. LAN Status Indicator This indicator illuminates g reen when a L AN connection has ...

  • Agilent Technologies 6000 Series - page 64

    64 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls 7. Probe Compensation T erminals Use the signal at th ese termi nals to matc h ea ch pr ob e’s c hara cteri sti cs to th e oscilloscope channel t o which it is connected. S ee page 54 . 8. AutoProbe Interface (Not a vailable on 100 MHz bandwidth models.) When you connect a probe to ...

  • Agilent Technologies 6000 Series - page 65

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 65 15. Digital Channels Input If you pur chased t he MSO upgrade you can vie w and trigger on digit al signals. See page 111 . 16. USB Host Port Connect a USB compliant mass storage device to store or recall oscilloscope setup files or wavef orm s. Y ou c an al so u se the USB p ort to ...

  • Agilent Technologies 6000 Series - page 66

    66 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls 6000A Series Oscilloscope Front-Panel Controls This is an introduction to the front-panel control s of t he Agilent 6000A Series oscilloscope. Generally , y ou set up t he front-panel controls and then mak e a measurement. The ke ys on t he fr ont panel bring up s oftkey menus on the ...

  • Agilent Technologies 6000 Series - page 67

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 67 Conventions Throughout this book, the front-panel k eys and softkeys are denoted by a change in f ont. F or example, the Cursors key is in the Measure section of the front panel. The Acq Mode softkey is the l eft- mos t so ftk ey when the A c quir e me nu i s di spl ay ed . In this m ...

  • Agilent Technologies 6000 Series - page 68

    68 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls 4-Channel 6000A Series Os cilloscope Front Panel The foll owing diagram sho ws the front panel of the 6000A Series 4-channel oscilloscopes. The controls of the 2-channel oscilloscopes are very simila r . F or a diagram showing the differences of the 2-ch annel oscilloscope, see page ...

  • Agilent Technologies 6000 Series - page 69

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 69 Front Panel Controls 1. Power Switch Press once to swit ch po wer on; press again to switch pow er of f. See page 33 . 2. Intensity Control Rotate clo ckwi se to i ncre ase anal og wa v ef orm in tensi ty; coun terc lock wise to dec rea se. Y ou can v ary the int ensity control to br ...

  • Agilent Technologies 6000 Series - page 70

    70 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls 6. V ertical Position Control U se thi s kno b to ch ang e the channel’s vertical position on t he display. There is one V er tical P osition control f or each channel. See “Using t he analog channels” on page 83. 7. Channel On/Off Key Us e this ke y to switc h the c hann el o ...

  • Agilent Technologies 6000 Series - page 71

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 71 14. Utility Key Press th is k ey to access t he Utility menu, which lets you configure the oscillosco pe’s I/O settings, printer configuration, f ile explorer , service menu, and other options. 15. T rigger Controls These controls determine ho w t he oscilloscope triggers t o captu ...

  • Agilent Technologies 6000 Series - page 72

    72 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls Run mode) then you are looking at the wav eform dat a from the last acquisition ta k en. See “To set up the Horizontal time base” on page 88. 19. Horizontal Menu/Zoom Key (Labeled Main/Delayed on older models.) Press this key to access the menu where you can split the oscillo sco ...

  • Agilent Technologies 6000 Series - page 73

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 73 24. AutoScale Key When you press the A utoScale ke y the oscilloscope will quickly dete rmine which c hannels ha ve activity , and it will turn these channels on and scale t hem to display the in put signals. See “How A ut oScale W o rk s” on page 312 25. Softkeys The functions o ...

  • Agilent Technologies 6000 Series - page 74

    74 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls 2-Channel 6000A Series Oscilloscope Front Panel (differences only) Figure 7 6000A Series 2-Channel Os cillosc ope Front Panel The differences betw een t he front panel of the 4-channel oscilloscopes and the 2-channel oscilloscopes are: • The 2-channel oscilloscope has tw o sets of ...

  • Agilent Technologies 6000 Series - page 75

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 75 Interpreting the display The oscilloscope display contains acquired wav eforms, setup information, measurement results, and softkeys f or setting up parameters. Figure 8 Interpreting the display Status line The top line of t he displa y contains ver tical, horizontal, and trigger set ...

  • Agilent Technologies 6000 Series - page 76

    76 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls 6000A Series Front-Panel Operation This section provides a brie f ov erview of operating the front-panel controls. Detail ed oscilloscope operating instructions are provided in later chapters. T o adjust the waveform intensity The Intensity control is at the low er left cor ner of th ...

  • Agilent Technologies 6000 Series - page 77

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 77 T o start and stop an acquisition • When y ou press t he Run/Stop ke y , it illuminates in green and the osci lloscope is in continuous r unning mode. The oscilloscope examines the in put voltage at each prob e, and updates the display whenev er the trigger conditions are met. T ri ...

  • Agilent Technologies 6000 Series - page 78

    78 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls T o make a single acquisition When y ou press t he Single k ey it illuminates in yello w and t he oscilloscope star ts th e acquisition system, searching f or t he trigger condition. When th e tr igger condition is met, t he captured wav eform is display ed, the Single ke y is exting ...

  • Agilent Technologies 6000 Series - page 79

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 79 2 If y ou are triggering on anal og channel events, turn the Trig ger Lev el knob to the t rig ger th resh old to a le v el tha t y our wav eform will cr oss. 3 T o begin a sing le acquisition, press t he Single key. When y ou press Sing le , the displa y is cleared, the trigger circ ...

  • Agilent Technologies 6000 Series - page 80

    80 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls 3 Tur n the Horizont al P osition knob () to pan horizont ally and turn t he channel’s v er tical position knob ( ) t o pan ver ti c all y. The stopped display may contain sev eral triggers worth of information, but only the las t trigger acquisition is a vailable for pan and zoom. ...

  • Agilent Technologies 6000 Series - page 81

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 81 T o make the oscilloscop e remain in the acquisition mode yo u hav e chosen, press t he AutoScale Acq Mode sof tke y and select Preserve Acquisition Mode . Ot her wise, the acquis ition mode will default to Normal whenever the AutoScale key is pressed. Example Connect the oscilloscop ...

  • Agilent Technologies 6000 Series - page 82

    82 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls around the oscilloscope’s B N C connec tor . Theref ore, t he oscilloscope will automatically set the atte nuation factor for recognized Agilent passive pr obes. Passiv e probes that do not have a pin that connects to the ring around the BNC connector will not be recognized by the ...

  • Agilent Technologies 6000 Series - page 83

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 83 Using the analog channels Connect the oscilloscope probes for channels 1 and 2 to the Probe Com p output on t he front panel of the instr ument. 1 Press the 1 ke y in t he Analog section of t he oscilloscope’s front panel to display the Channel 1 menu. Pressing an analog channel ke ...

  • Agilent Technologies 6000 Series - page 84

    84 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls V ertical sensitivity T urn the larg e knob abo ve the channel key to set the sensitivity (volts/division) for the channel. The vertical sensiti vity knob changes t he analog channel sensitivity in a 1-2-5 step sequence (with a 1:1 probe att ached). The analog channel V olts/Div valu ...

  • Agilent Technologies 6000 Series - page 85

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 85 2 Press the channel’s on/of f ke y , then press t he Coupling softke y to select t he input channel coupling. Coupling changes t he channel' s input coupling to either AC (alternating cur rent) or DC (direct current) . AC coupling places a 3.5 Hz high-pass filter in series wit ...

  • Agilent Technologies 6000 Series - page 86

    86 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls • 50 Ohm mode matches 50-ohm cables commonly used in making high frequency meas urements, and 50-ohm active probes. This im pedance matching gives y ou the most accurate measurements sinc e ref lections are minimized along the signal path . When 50 Ohm is selected, “50 Ω ” is ...

  • Agilent Technologies 6000 Series - page 87

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 87 6 Press the Prob e softkey to displa y the channel probe menu. This menu lets you select additional pr obe parameters such as attenuation factor and units of measurement for the connected probe. • Probe Units — Press the Units sof tke y to select t he proper measurement unit for ...

  • Agilent Technologies 6000 Series - page 88

    88 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls • Calibrate Probe — See “T o calibrat e the probes” on page 55. T o set up the Horizontal time base 1 Press the Menu/Zoom ke y (labeled Main/Delayed on older models) in t he Horizontal section of t he front panel. T o manually control t he horizont al time base on 6000L model ...

  • Agilent Technologies 6000 Series - page 89

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 89 2 Tur n th e large knob (time/divi sion) in the H orizontal se ction and notice the change it makes to the st atus line. When the oscilloscope is running in Main mode, use the large Horizontal knob t o change sweep speed and use t he small kno b ( ) to se t the h oriz o ntal position ...

  • Agilent Technologies 6000 Series - page 90

    90 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls • Whe n the h ori zontal mod e is s et to M ain, the h oriz ontal position knob positions the main sweep relative to the trigger . This dela y is a f ix ed number . Changing this delay value does not affect the swee p speed. • When the horizont al mode is set to Zoom, t he horizo ...

  • Agilent Technologies 6000 Series - page 91

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 91 Zoom mode Zoom sweep is an expanded version of main sweep. When Zoom mode is selected, t he display divides in half and the Zoom swe e p i c o n di s pl ay s in t h e m id d l e o f t h e l i n e a t t h e t op o f t h e displa y. The top half of the display sho ws the main sw eep an ...

  • Agilent Technologies 6000 Series - page 92

    92 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls The area of the ma in display that is expanded is intensif ied and marked on each end with a ver tical marker . These mark ers show what portio n of the main sweep is expanded in t he low er half. The Horizont al knobs control the size and position of t he Zoom sweep. The dela y valu ...

  • Agilent Technologies 6000 Series - page 93

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 93 T o change t he sweep speed f or t he Zoom sweep windo w , turn the sweep speed knob. As you turn the knob, t he sweep speed is highlighted in the status line abov e the wav eform displa y area. The time reference position sets the initial position of t he trigger event within acquis ...

  • Agilent Technologies 6000 Series - page 94

    94 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls • In Roll mode there is no trigger . The fixed ref erence point on the screen is t he right edge of the screen and refers to the current moment in time. Events that have occurred are scrolled to the lef t of th e ref erence point. Since t here is no trigger , no pre-trigger informa ...

  • Agilent Technologies 6000 Series - page 95

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 95 T o make cursor measurements Y ou can use the cursors to make custom v olt age or time measurements on oscillosc ope signals, and timing measurements on digital channels. • T o manually control Cursors on 6000L models st ar t the Remote Front Panel (see page 44 ) and select Measure ...

  • Agilent Technologies 6000 Series - page 96

    96 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls T o make automatic measurements Y ou can use automatic measur ements on any channel sour ce or any running math function. Cursors are turned on t o f ocus on the most recently sele cted me asurement (right-most on t he measurement line above the sof tk eys on the displa y). 1 Press t ...

  • Agilent Technologies 6000 Series - page 97

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 97 Using Labels Y ou can def ine labels and assign them t o each analog in put channel, or you can turn labels off t o increase the wavef orm display area. Label s can also be applied to digital channels on MSO models. T o turn the label display on or off 1 Press the Label ke y on t he ...

  • Agilent Technologies 6000 Series - page 98

    98 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls T o assign a predefined label to a channel 1 Press the Label ke y. 2 Press the Channel sof tk ey , then turn t he Entr y knob or successivel y press t he Channel softkey to select a channel f or label assignment. The figu re abo ve sho ws t he list of chan nels and their def ault lab ...

  • Agilent Technologies 6000 Series - page 99

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 99 T o define a new label 1 Press the Label ke y. 2 Press the Channel sof tk ey , then turn t he Entr y knob or successivel y press t he softkey to select a channel f or label assignment. The channel does not hav e to be tur ned on to hav e a label ass ign ed to i t. I f the c hann el i ...

  • Agilent Technologies 6000 Series - page 100

    100 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls T o load a list of labels from a text file you create It may be conv en ient to create a list of labe ls using a text edit or , then load the l abel lis t into the os cill osc ope. Thi s let s y ou t ype on a ke yboard rather t han edit the label list using t he oscilloscope’s con ...

  • Agilent Technologies 6000 Series - page 101

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 101 T o reset the label li brary to the factory default 1 Press Utility & Options & Preferences . 2 Press the Defau lt Library so ftke y. This will delete all user- def ined labels from the librar y and set the labels in t he librar y back t o the fact or y default. Ho wev er , ...

  • Agilent Technologies 6000 Series - page 102

    102 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls T o set the clock The Clock menu lets you set the current date and time of day (24-hour f or mat). This time/dat e stamp will appear on hard copy prints and director y information on the USB mass st orage device. T o s et the date a nd ti me, or to v ie w the c urren t date and t im ...

  • Agilent Technologies 6000 Series - page 103

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 103 T o set up the screen saver The oscilloscope can be configured t o turn on a display screen sa ver when the oscillos cope has be en idle for a specified lengt h of time. 1 Press Utility & Options & Preferences & Screen Saver to d isp la y the screen sav er menu. 2 Press ...

  • Agilent Technologies 6000 Series - page 104

    104 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls 3 Tur n the Entr y knob to select t he number of minutes t o wait bef ore t he selected screen s a ver activates. When y ou tur n the Entr y knob, t he number of minutes is display ed in t he Wa i t sof tk ey. The default time is 180 minut es (3 hours). 4 Press the Preview softkey t ...

  • Agilent Technologies 6000 Series - page 105

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 105 T o perform service functions • Press the Utility & Service to display the service menu. The Service Menu lets yo u: • P er f orm User Cal on the oscillosc ope. • View User Cal status. • P er form instru ment Self T est. • Vie w information about y our oscil loscope mo ...

  • Agilent Technologies 6000 Series - page 106

    106 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls P er forming User Cal will invalidate your Certificat e of Calibration. If NIST (National Institute of Standards and T echnology) traceability is required, per form the Performance V erification procedure in the A gilent InfiniiVision 6000 Series Oscilloscopes Service Guide using tr ...

  • Agilent Technologies 6000 Series - page 107

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 107 F or a 4-channel oscilloscope, connect BNC tees to t he equal-length cables as shown belo w . Then connect a BNC(f)-to-BNC(f) (barrel connector) t o the t ee as sho wn belo w . Figure 11 User Calibra tion cable for 4-channel os cilloscope 1 Connect a BNC cable (40 inches maximum) fr ...

  • Agilent Technologies 6000 Series - page 108

    108 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls probes do not need to be calibrated, but Inf iniiMax probes can be calibrated. For more information about calibr ating probes see page 55 . Results: User Cal date: Change in temperature since last User Cal: Failure: Comments: Probe Cal Status: Self T est Pressing Utility & Servi ...

  • Agilent Technologies 6000 Series - page 109

    Front-Panel Controls 2 6000 Series Oscilloscope User’s Guide 109 Installed licenses: This line in the About This Oscilloscope dialog contains information about the licenses that have been installed on the oscilloscope. F or example, it can sho w: • 232 — U ART (Univ ersal Asynchronous Receiver/Transmitter) and RS232 (Recommended Standa rd 232 ...

  • Agilent Technologies 6000 Series - page 110

    110 6000 Series Oscilloscope User’s Guide 2 Front-Panel Controls T o restore the oscilloscope to its default configuration • Press the Save/Recall key , t hen press the Default Setup softke y. The default configur ation returns the oscilloscope t o its default settings. This places the o scilloscope in a known operating condition. The major def ...

  • Agilent Technologies 6000 Series - page 111

    111 Agilent T echnologies Agilent 6000 Series Oscilloscope User’s Guide 3 V iewing and Measuring Digital Signals T o connect the digital probes to the circuit under test 112 Acquiring waveforms usin g the digital channels 115 T o display digital channels us ing AutoScale 116 Interpret ing the digital wavefor m display 118 T o switch all digital c ...

  • Agilent Technologies 6000 Series - page 112

    112 6000 Series Oscilloscope User’s Guide 3 Viewing and Measuring Digital Signals T o connect the digital probes to the circuit under test The digital channels are enabled on MSO6000 models and DSO6000 models which hav e the MSO upg rade license installed. 1 If y ou feel it’s necessar y , turn off the pow er supply to the circuit under test. Tu ...

  • Agilent Technologies 6000 Series - page 113

    Viewing and Measuring Digital Signals 3 6000 Series Oscilloscope User’s Guide 113 the osci lloscope. Snap t he wide end of t he cable guide in place, being careful no t to pinch the cable. 4 Connect the g round lead on each set of channels (each pod), using a probe grabber . The ground lead impro ves signal fideli ty to the oscilloscope, ensuring ...

  • Agilent Technologies 6000 Series - page 114

    114 6000 Series Oscilloscope User’s Guide 3 Viewing and Measuring Digital Signals 6 Connect the g rabber to a node in the circuit you want to test. 7 F or high-speed si gnals, connect a g round lead to the probe lead, connect a grabber t o the ground lead, and att ach the gra bber to gr ound in th e ci rcu it u nde r tes t. Signal Lead Ground Lea ...

  • Agilent Technologies 6000 Series - page 115

    Viewing and Measuring Digital Signals 3 6000 Series Oscilloscope User’s Guide 115 8 Repeat steps 3 through 6 until yo u hav e connected all points of interest. Acquiring waveforms using the digital channels When you press Run/Stop or Si ngle t o run t he oscilloscope, t he oscilloscope examines t he input v olt age at each input probe. When the t ...

  • Agilent Technologies 6000 Series - page 116

    116 6000 Series Oscilloscope User’s Guide 3 Viewing and Measuring Digital Signals T o display digital channels using AutoScale When signals are connected to the digit al channels, A ut oScale quickly configures and disp la ys the digit al channels. • T o conf igure th e instrument qui ckly , press t he AutoScale key . Any digital channel with a ...

  • Agilent Technologies 6000 Series - page 117

    Viewing and Measuring Digital Signals 3 6000 Series Oscilloscope User’s Guide 117 configuration by pressing the Save/ Recall ke y , then th e Default Setup sof tk ey. Then press the AutoScale ke y. Y ou should see a display similar to the follo wing. Figure 12 AutoScale of digital ch annels 0 & 1 (MSO models on ly) ...

  • Agilent Technologies 6000 Series - page 118

    118 6000 Series Oscilloscope User’s Guide 3 Viewing and Measuring Digital Signals Interpreting the digital waveform display The foll owing figure sho ws a typical display with digital channels. Activity indicator When any digital channels are turn ed on, an activity indicator is display ed in t he status line at th e bottom of the display. A digi ...

  • Agilent Technologies 6000 Series - page 119

    Viewing and Measuring Digital Signals 3 6000 Series Oscilloscope User’s Guide 119 T o switch all digital channels on or off 1 Press the D15 Th ru D0 ke y to swit ch the display of the digital channels on or off. The Digit al Channel Menu will be display ed abov e the s oftkeys. On 6000L models select Digital from the main menu or press ctrl+D. Th ...

  • Agilent Technologies 6000 Series - page 120

    120 6000 Series Oscilloscope User’s Guide 3 Viewing and Measuring Digital Signals T o change the displayed size of the digital channels 1 Press the D15 Th ru D0 key . 2 Press the size ( ) softkey to select ho w the digit al channels are display ed. The sizing control lets y ou spre ad out or compress t he digital traces vertically on the displa y ...

  • Agilent Technologies 6000 Series - page 121

    Viewing and Measuring Digital Signals 3 6000 Series Oscilloscope User’s Guide 121 function changes depending on which menu is display ed. Fo r example, when assigning Labels on digital channels the Entr y knob selects the channel to which t he Label will be applied. T o change the logic threshold for digital channels 1 Press the D15 Th ru D0 k ey ...

  • Agilent Technologies 6000 Series - page 122

    122 6000 Series Oscilloscope User’s Guide 3 Viewing and Measuring Digital Signals T o display digital channels as a bus Digital channels may be grouped and displa yed as a bus, with each bus value display ed at th e bottom of the display in hex or binar y. Y ou can create up t o tw o busses. T o conf igure and display each bus, press the D15 Thru ...

  • Agilent Technologies 6000 Series - page 123

    Viewing and Measuring Digital Signals 3 6000 Series Oscilloscope User’s Guide 123 The buses are shown at the bott om of the display. Using cursors to read bu s values T o read the digit al bus value at any point using the cursors: 1 Switch on Cursors (b y pressing the Cursor k ey on the front panel) 2 Press the cur sor Mode softke y and change t ...

  • Agilent Technologies 6000 Series - page 124

    124 6000 Series Oscilloscope User’s Guide 3 Viewing and Measuring Digital Signals 4 Use the Entr y knob and t he X1 and X2 softkeys to position th e cursors where y ou wan t to read the bus values. When y ou press t he D15 Thru D0 ke y to d ispla y t he Digit al Channel Menu, the digit al activity indicator is shown where the cursor values were a ...

  • Agilent Technologies 6000 Series - page 125

    Viewing and Measuring Digital Signals 3 6000 Series Oscilloscope User’s Guide 125 Bus values are displayed when using Pattern trigger The bus values are also displa yed when using the P atter n trigger function. Press the Pattern key on the front panel t o display the Pattern Trigger Menu and the bus values will be display ed on the right, abo ve ...

  • Agilent Technologies 6000 Series - page 126

    126 6000 Series Oscilloscope User’s Guide 3 Viewing and Measuring Digital Signals ...

  • Agilent Technologies 6000 Series - page 127

    127 Agilent T echnologies Agilent 6000 Series Oscilloscope User’s Guide 4 T riggering the Oscilloscope Selecting T rigger Modes and Conditions 130 The External T rigger input 136 T rigger T ypes 139 T o use Edge triggering 140 T o use Pulse Width triggering 142 T o use Pattern triggering 145 T o use CAN triggering 14 8 T o use D uration triggerin ...

  • Agilent Technologies 6000 Series - page 128

    128 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope The Agilent Inf iniiVis ion 6000 Series oscill oscopes pro vide a full se t of f ea ture s to he lp a utoma te y our meas urem ent t as ks. MegaZoom technology lets y ou capture and examine untriggered wav eforms. Wit h these oscilloscopes you can: • Modify the way the osci ...

  • Agilent Technologies 6000 Series - page 129

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 129 • Trigger Out connect or T o manually control Triggering on 6000L models star t the Remote Front Panel (see page 44 ) and select T rigger from the Main Menu. NOTE Adding options such as the Low Speed Serial (LSS) or Automoti ve Serial (AMS) serial decode fe ature to the osc ...

  • Agilent Technologies 6000 Series - page 130

    130 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope Selecting T rigger Modes and Conditions The trigger mode affects the way in which the oscilloscope searches for the trigger . The figu re belo w shows the conceptual represent ation of acquisition mem or y. Think of the tr igger ev ent as dividing acquisition memo ry into a p ...

  • Agilent Technologies 6000 Series - page 131

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 131 T rigger modes: Normal and Auto An introduction to Normal and Auto trigger modes is giv en on page 80 . 1 Press the Mode/Coupling key . 2 Press the Mode sof tke y , then select Normal or Auto . • Normal mode displa ys a wavef orm when t he trigger conditions are met, other ...

  • Agilent Technologies 6000 Series - page 132

    132 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope Normal mode Use Normal trigger mode f or low repetitiv e-rate signals or when Auto trigger is not required. In Normal mode the oscilloscope must fill t he pre-trigger buffer with dat a before it will begin sear ching for a trigger ev ent. The trigger mode indicator on t he st ...

  • Agilent Technologies 6000 Series - page 133

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 133 T o select trigger Coupling 1 Press the Mode/Coupling key . 2 Press the Coupling sof tke y , then select DC, AC, or LF Reject coupling. • DC coupling allo ws DC and A C signals into t he trigger path. • AC coupling places a 10 Hz (3.5 Hz in 100 MHz bandwidth models) high- ...

  • Agilent Technologies 6000 Series - page 134

    134 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope • HF Reject adds a 50 kHz lo w-pass filt er in the trigger path to remov e high frequency components from the trigger wav eform. Y ou can use HF Reject to remo ve h i g h - f r e q u e n c y n o i s e , s u c h a s A M o r F M b r o a d c a s t s t a t i o n s or noise from ...

  • Agilent Technologies 6000 Series - page 135

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 135 Holdoff Operating Hints Holdoff keeps a trigger from occurri ng until after a certain amount of time has passed sinc e the last trigger . This feat ure is valuable when a waveform crosses the trigger level multip le times during one period of the waveform. Without holdoff, th ...

  • Agilent Technologies 6000 Series - page 136

    136 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope The External T rigger input Th e Ex te r nal Tr ig ger inpu t c an b e us ed as a so urce in sever al o f the trigger types. On 2-channel oscilloscopes, the ext ernal trigger BNC in put is on the front panel and is labeled Ext T rigger . On 4-channel oscilloscopes, the ext er ...

  • Agilent Technologies 6000 Series - page 137

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 137 When you connect an AutoProbe self-sensing probe, the oscilloscope will automatically configure your probe to the correct attenuation factor . Note that the AutoProbe feature is not available on 100 MHz bandwidth models. The probe correction factor must be set properly f or m ...

  • Agilent Technologies 6000 Series - page 138

    138 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope • 1M Ohm mode is for use with many passiv e probes and f or general-purpose measu rements. The higher impe dance minimizes the loading effect of the oscilloscope on the circ uit under test. Probe Units Press th e Units softkey to select the proper measurement unit for the c ...

  • Agilent Technologies 6000 Series - page 139

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 139 T rigger T ypes The oscilloscope lets you synchronize the display to t he actions of the c ircuit under test by def i ning a trigger condition. Y ou can use any in put channel or t he Ext Trigger BNC as th e source f or most trigger types. These trigger types are a vailable a ...

  • Agilent Technologies 6000 Series - page 140

    140 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope T o use Edge triggering The Edge trigger type identi f ies a trigger b y looking for a specified edge (slope) and voltage level on a wa vef orm. Y ou can define t he trigger source and slope in this menu. The slope can be set to rising edge or falling edge, and can be set t o ...

  • Agilent Technologies 6000 Series - page 141

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 141 3 Select the trigger sour ce. Y ou can select analog channel 1 or 2, Ext, or Line as t he trigger source on an y A gilent 6000 Series oscilloscope. The trigger source can also be set to channel 3 and 4 on the 4-channel oscilloscopes, or di gital channels D15 through D0 on the ...

  • Agilent Technologies 6000 Series - page 142

    142 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope set the t hreshold lev el (TTL, CMOS , ECL, or user def ined) for the selected digit al channel group. The t hreshold value is displa yed in the upper -right corner of the display. When Ext (Exter nal Trigger) is selected, its le vel can be adj ust ed using the Level knob in ...

  • Agilent Technologies 6000 Series - page 143

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 143 The channel you select is sho wn in the upper- right cor ner of the d isp la y nex t to the pola rit y sym bol. The source can b e any analog or digital channel avail able on yo ur oscilloscope. External trig ger may also be specified as a source when using a 2-channel oscill ...

  • Agilent Technologies 6000 Series - page 144

    144 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope F or example, f or a positive pulse, if you set t>10 ns: • within a range of time values ( >< ). F or example, f or a positive pulse, if you set t>10 ns and t<15 ns: 5 Select the qualifier time set softke y ( < or > ), then r otate th e Entr y knob to s ...

  • Agilent Technologies 6000 Series - page 145

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 145 T o use Pattern triggering The Pattern tri gger identif ies a tr igger co ndition by looking for a specifi ed patter n. This patter n is a logical AND combination of the channels. Each channel can ha ve a value of high (H), lo w (L ), don't care (X). A rising or falli ng ...

  • Agilent Technologies 6000 Series - page 146

    146 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope Adjust the trigger le vel for the selected analog channel by turning the Trigger Lev el knob. Press the D15 Thru D0 ke y a n d select Thresholds to set the thr esh old l ev el fo r dig ital channels. The value of the trigge r level or digital t hreshold is display ed in t he ...

  • Agilent Technologies 6000 Series - page 147

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 147 Hex Bus Pattern T riggering Y ou can s pecify a bus value on which t o trigger . T o do t his, first define the bus. See “T o display digital channels as a bus” on page 122 for det ails. Y ou can trigger on a bus value whether you are displaying the bus or not. T o trigge ...

  • Agilent Technologies 6000 Series - page 148

    148 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope T o use CAN triggering Controller Area N etwork (C AN) trigger will trigger on CAN version 2.0A and 2.0B signals. Setup consists of connecting the oscilloscope to a CAN signal, using the Settings menu to specify the event to trigger on, and using the Signals men u to s peci f ...

  • Agilent Technologies 6000 Series - page 149

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 149 softkey , t hen press the Settings softkey to display C AN trigger menu. 2 Repeatedly press and release the T rigger: soft ke y o r ro tate the Entr y knob to select the trigger condition. • SOF - Start of Frame — The oscilloscope tr iggers at the st ar t of a frame. • ...

  • Agilent Technologies 6000 Series - page 150

    150 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope • Error Frame - The oscilloscope will tri gger on CAN activ e error frames. • All Errors - The oscilloscope wil l trigger when any f or m error or active error is encountered. • Acknowledge Error - The oscilloscope will trigger when the ackno wledge bit i s recessive (h ...

  • Agilent Technologies 6000 Series - page 151

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 151 5 Repeatedly press and release the Baud softkey to set the CAN si gnal baud rate to match y our C AN bus s ign al. The CAN baud rate can be set to: The default baud rate is 1 Mb/s 6 Repeatedly press and release t he Smpl Pt soft k ey to select t he point between phase segment ...

  • Agilent Technologies 6000 Series - page 152

    152 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope T o use Duration triggering Duration trigger lets you define a patter n, then trigger on a specified time duration of this logical AND combinatio n of t he channels. 1 Press the More key in the T rigger section of the front panel, rotate the Entr y knob un til Duration is dis ...

  • Agilent Technologies 6000 Series - page 153

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 153 Adjust the trigger le vel for the selected analog channel by turning the Trigger Lev el knob. Press the D15 Thru D0 ke y a n d select Thresholds to set the thr esh old l ev el fo r dig ital channels. The value of the trigge r level or digital t hreshold is display ed in t he ...

  • Agilent Technologies 6000 Series - page 154

    154 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope < qualifier time set softkey • When the less than ( < ) qu alifier is selec ted, the E ntr y knob sets the oscilloscope t o trigger on a pattern duration less than t he time value displa yed on the so ftke y. • When the within time range ( >< ) qualif ier is s ...

  • Agilent Technologies 6000 Series - page 155

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 155 T o use FlexRay triggering The N5432A FlexRa y triggering an d decode option, along with the Ag ilent VPT1000 pr ot ocol analyzer and its MSO communications cable, allo w a 6000 Series mixed-signal oscilloscope to: • Control the VPT1000 (without a PC). • Trigger on F lexR ...

  • Agilent Technologies 6000 Series - page 156

    156 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope Oscilloscope Cont rols the VPT1000, Synchronous Mode Monitoring Y ou can see a synchronous and time-correlated display of segment and slot timing boun daries by im porting a FIBEX (Field Bus Exchange f ormat) f ile th at defines the g lobal FlexRay schedule. PC Controls the V ...

  • Agilent Technologies 6000 Series - page 157

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 157 Specifying the V PT1000 LAN Address This is necessar y when the oscilloscope controls the VPT1000 (but not when a PC with J8130A Option 200 sof tware controls the VPT1000). 1 From the VPT1000 Menu, press the LAN Address sof tke y to access the VPT1000 L AN Addresses Menu. 2 E ...

  • Agilent Technologies 6000 Series - page 158

    158 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope Note that the VPT1000 is shipped pre-conf igured with an IP address of 192.168.80.<serial number>, and a subnet mask of 255.255.240.0. See the VPT1000 user manual for more information. 4 Set the osci lloscope’s IP address: 1 Press Utility & IO & Control . Dese ...

  • Agilent Technologies 6000 Series - page 159

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 159 In Asynchronous Mode 1 Press the Baud softkey to select a baud rate of 2.5 Mb/s , 5M b / s , or 10 Mb/s . 2 Press the Channel sof tk ey to select channel A or B . In Synchronous Mode 1 Press the FIBEX File softke y to specify the locat ion of the FIBEX (Field Bus Exchange f o ...

  • Agilent Technologies 6000 Series - page 160

    160 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope T riggering on FlexRay Fr ames, Times, or Errors Accessing the FlexRay T rigger Menu 1 In the T rigger section on the front panel, press the More key . 2 Press the T rigger softke y , and use the Entr y knob to select FlexRay . 3 Press the Settings softkey to access the Flex ...

  • Agilent Technologies 6000 Series - page 161

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 161 This is the c y cle count in the frame header , not t he inst ance in time where that cycle begins. 5 Press the Frame T ype softkey to select the frame type value from: • All Frames • Startup Frames • NULL Frames • Sync Frames • Normal Frames • NOT Startup Frames ...

  • Agilent Technologies 6000 Series - page 162

    162 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope 4 Press the Cyc C t Bas sof tk ey , and use the Entr y knob to select the cycl e count base value from 0 throu gh th e Cyc Ct Rep value minus 1, or All . 5 Press the Segment sof tk ey to select the type of segments from: • Static Segments • Dynamic Segments • Symbol Seg ...

  • Agilent Technologies 6000 Series - page 163

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 163 • TSS Violation — transmission star t sequence violation. • Header CRC Error — cy clic redundan cy check error in t he header . • Frame CRC Error — cy clic redundancy c heck error in the frame. • Frame End Sequence Error — i ndic ates that th e FES has b een v ...

  • Agilent Technologies 6000 Series - page 164

    164 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope T o use I 2 C triggering An I 2 C (Inter -IC bus) trigger setup consists of connecting t he os ci llo sc ope to th e s er ial da ta (S D A ) l ine an d the se ri al c lo ck (SCL) line, then triggering on a st op/star t condition, a rest art, a missing ackno wledge, an EEPROM ...

  • Agilent Technologies 6000 Series - page 165

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 165 2 Press the Signals sof tk ey to display the I 2 C signals menu. 3 Connect an oscilloscope channel to t he SCL (serial clock) line in the ci rcu it un der te st, then s et the SCL clock channel so f tk e y to th at ch anne l. As you press the SCL s oft ke y (o r r ota te th e ...

  • Agilent Technologies 6000 Series - page 166

    166 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope Data needs t o be stable during the whole high clock cy cle or it will be interpreted as a st art or st op condition (data transitioning while t he clock is high). 6 Ret urn to th e pr evi ous menu ; then , pre ss the T rigger: sof tkey to select one of the follo wing I 2 C t ...

  • Agilent Technologies 6000 Series - page 167

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 167 • EEPROM Data Re ad — The trigger looks for EEPROM control byte value 1010xxx on the SD A line, f ollow ed by a Read bit and an Ack bit. It then looks for the dat a value and qualifie r set by the Data softkey and the Data is softkey . When this event oc curs, the oscillo ...

  • Agilent Technologies 6000 Series - page 168

    168 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope • Frame (Start: Addr7: Re ad: Ack: Data: Ack: Data2) or Frame (Start: Addr7: W rite: Ack: Data: Ack: Data2) — The oscilloscope triggers on a read or write frame in 7-bit addressing mode on the 26t h clock edge if all bits in t he patter n match. For triggering purposes, a ...

  • Agilent Technologies 6000 Series - page 169

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 169 Press the Data is softkey to set the oscilloscope to trigger when data is = (equal to), ≠ (not equal t o), < (less than), or > (gr eate r than ) the data v alue set in the Data sof tk ey. The oscilloscope will trigger on the clock edge for the Ack bit aft er the trigg ...

  • Agilent Technologies 6000 Series - page 170

    170 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope T o use Nth Edge Burst triggering The Nth Edge Burst trigger lets yo u trigger on the Nth edge of a burst that occurs af ter an idle time. Nth Edge Burst trigger set up co nsists of selecting t he source, the slope of the edge, the idle time, and the number of the edge: 1 Pre ...

  • Agilent Technologies 6000 Series - page 171

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 171 3 Press the Slope sof tke y t o specify th e slope of t he edge. 4 Press the Idle sof tk ey; then, turn t he Entry knob t o specify the i dle time . 5 Press the Edge softk e y; the n, tu rn the E ntry kno b to wh ich edge to trig ger on. Assign channels Slope of edge Idle tim ...

  • Agilent Technologies 6000 Series - page 172

    172 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope T o use LIN triggering LIN (Local Interconnect Networ k) trigger setup consists of connecting t he oscilloscope to a seri al LIN signal. LIN triggering will trigger on th e rising edg e at the Sync Break exit of the LIN si ngle-wire bu s signal that mark s the beg inning of t ...

  • Agilent Technologies 6000 Series - page 173

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 173 1 Press the More key in the T rigger section of the front panel, rotate t he Entr y knob until LIN is display ed in t he T rigger softkey. 2 Press the Settings sof tke y to display LIN trigger menu. 3 Press the T rigger: softkey and choose to trigger on Sync Break or Frame ID ...

  • Agilent Technologies 6000 Series - page 174

    174 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope 4 Press the Signals sof tke y. The LIN Signals Menu will be display ed. 5 Press the Source sof tk ey to select the channel connected t o the L IN s igna l lin e. Adjust the trigger le vel for the selected analog channel by turning the Trigger Lev el knob. Press the D15 Thru D ...

  • Agilent Technologies 6000 Series - page 175

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 175 T o use Sequence triggering Sequence trigger lets you trigger t he oscilloscope aft er findin g a sequence of ev ents. Def ining a sequence trigger requires three steps: 1 Define an event to find befo re y ou search for the trigger . The “find” event can be a pattern, an ...

  • Agilent Technologies 6000 Series - page 176

    176 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope As y ou set st age, ter m, and channel definitions for the sequence trigger , these settings will be sho wn in the wavef orm area of t he display. Channel select Stage select Find, Trigger on , or Reset condition Define term Trigger level or threshold Sequence trigger Return ...

  • Agilent Technologies 6000 Series - page 177

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 177 Define the Find: stage 1 Press the Stage sof tke y and select Find: . Find : is the f irst st age in the trigger sequence. When y ou select the Stage Find sof tke y , the next sof tke y t o the right will display Find: and give y ou a list of t he terms you can define f or t ...

  • Agilent Technologies 6000 Series - page 178

    178 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope • X sets the patt ern t o don't care on the selected channel. Any channel set to don't care is ignored and is not used as part of t he patter n. If all channels in the patter n are set to don't care, the oscilloscope will not trigger . Adjust the trigger le v ...

  • Agilent Technologies 6000 Series - page 179

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 179 • Pattern 2 Entered — A pattern is ent ered on the last edge t hat makes the pattern tr ue (logical AND). • Pattern 2 Exited — A patter n is exited on the f irst edge that makes the pattern false (logical NAND). • Edge 2 • Pattern 2 and Edge 2 • Nth Edge 2 • N ...

  • Agilent Technologies 6000 Series - page 180

    180 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope When Nth Edge 2 (no re-find) is selected, if the Find event occurs again bef ore t he Count (N) ev ent is satisf ied, the Count (N) is not reset to zero. b Press the Te r m sof tk ey and select Count (N) . c Press the N sof tk ey , then turn t he Entr y knob to set the number ...

  • Agilent Technologies 6000 Series - page 181

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 181 5 If you select a pattern ter m, each channel in the patter n must be set to a H (high), L (lo w), or X (don't care). a Press the Channel so ftk e y ( or ro tate the En try k nob on mix ed-signal oscilloscopes) t o select the channel. b Press the L H X sof tke y to set a ...

  • Agilent Technologies 6000 Series - page 182

    182 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope T o use SPI triggering Serial P eripheral Inter face (SPI) trigger setup consists of connecting the oscilloscope to a clock, data, and framing signal. Y ou can t hen trigger on a data patter n that occurs at t he star t of a frame. The serial data string ca n be specif ied to ...

  • Agilent Technologies 6000 Series - page 183

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 183 Assign channels # data b its in string Data bit select Set all data bits to value Trigger level or threshold Currently selected Clock, Framing, or Data channel SPI trigger Return to previous menu Data bit value Data string values Graphic showing current state of the SPI trigg ...

  • Agilent Technologies 6000 Series - page 184

    184 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope Assign source channels to the clock, data, and frame signals 1 Press the Signals sof tke y to access SPI trigger settings for clock source and slope, data source, and frame type and source. 2 Press the Clock sof tke y or turn t he Entr y knob to select t he channel connected ...

  • Agilent Technologies 6000 Series - page 185

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 185 4 Press the Data softkey or turn the Entr y knob t o select the channel that is connected t o th e SPI serial data line. (If the channel you selected is of f, switch it on.) As you press the Data s oft k ey (o r r ota te th e E nt r y k no b o n mix ed-signal oscilloscopes), ...

  • Agilent Technologies 6000 Series - page 186

    186 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope Y ou can set t he oscilloscope to trigger during a high chip select ( CS ), a low chip select ( ~CS ), or after a Ti me o ut period during which the clock signal has been idle. • If the framing si gnal is set to CS (or ~CS ), th e firs t clock edge as defined, rising or fal ...

  • Agilent Technologies 6000 Series - page 187

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 187 The Timeout value can be set anywhere from 100 ns to 10 s. 6 Pre ss the up- arro w softk ey to re turn to the pr evi ous m enu. Set up the number of bits in the seri al data string and set values for those data bits 1 Press the #Bits softkey , and tur n the Entr y knob to set ...

  • Agilent Technologies 6000 Series - page 188

    188 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope The oscilloscope’s MegaZoom III t echnology gives y ou bright, easily vie wed displa ys of any part of t he video wav eform. Analysis of video wa vef or ms is simplified by the oscilloscope’s ability to trigger on an y selected line of the video signal. 1 Press the More k ...

  • Agilent Technologies 6000 Series - page 189

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 189 The selecte d trigger source is display ed in t he upper-right corner of the display . T urning the Trigger Level knob does not change the trig ger lev el because t he trigger level is au tomat ical ly s et to the sy nc pulse. Trigger coupling is automatically set to TV in t ...

  • Agilent Technologies 6000 Series - page 190

    190 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope • Line — Trig ger on the select ed line # (EDT V and H DT V standards only). • Line: Field1 and Line:Field2 — Trigger on the selected line # in field 1 or f ield 2 (interlace d st andards only ex cept 1080i). • Line: Alternate — Altern atel y tr igge r on the se l ...

  • Agilent Technologies 6000 Series - page 191

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 191 Ta b l e 1 2 Line (or count for Generic) n umbers per field for each non-HDTV/EDTV vide o standard Ta b l e 1 3 Line numbers for each EDTV/HD TV video standard Example exercises The f ollo wing are exer cises to familiarize y ou with T V triggering. These exercises use the NT ...

  • Agilent Technologies 6000 Series - page 192

    192 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope O n e e x a m p l e o f t r i g g e r i n g o n a s p e c i f i c l i n e o f v i d e o i s l o o k i n g a t the vertical int erval test signals (VITS), which are typically in line 18. Another example is closed captioning, which is typicall y in line 21. 1 Press the Trigger ...

  • Agilent Technologies 6000 Series - page 193

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 193 T o trigger on all sync pulses T o quickly find maximum video le vels, y ou could trigger on all sync pulses. When All Lines is select ed as the T V trigger mode, the osci lloscope will trigger on all horizontal sync pulses. 1 Press the Trigger More k ey , the n pr ess th e T ...

  • Agilent Technologies 6000 Series - page 194

    194 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope T o trigger on a specific field of the video signal T o examine the components of a video signal, trigg er on eit her Field 1 o r Field 2 (available f or int erleav ed st andards). When a specifi c field is se lected, t he oscilloscope triggers on the rising edge of the fi rs ...

  • Agilent Technologies 6000 Series - page 195

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 195 T o trigger on all fields of the video signal T o quickly and easily vie w transitions between fields, or to f ind the amplitude dif f erence s between the fields , use the All F ields trigger mode. 1 Press the Trigger More k ey , the n pr ess th e TV sof tke y. 2 Press the S ...

  • Agilent Technologies 6000 Series - page 196

    196 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope T o trigger on odd or even fields To c h e c k t h e e n v e l o p e o f yo u r v i d e o s i g n a l s , o r t o m e a s u r e w o r s t case distor tion, trigger on t he odd or even fields. When Fi eld 1 is selected, t he oscilloscope triggers on color fi elds 1 or 3. When ...

  • Agilent Technologies 6000 Series - page 197

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 197 If a more det ailed analysi s is require d, the n only one co lor f ield should be selected to be the trig ger . Y ou can do this by using t he TV Holdoff sof tk ey in the trigger More Trig ger Menu when the trigger type is set to TV . Press the TV Holdoff sof tkey and use th ...

  • Agilent Technologies 6000 Series - page 198

    198 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope Ta b l e 1 4 Half-field hold off time Figure 20 Using TV Holdoff to Synchronize to Color Field 1 or 3 (Fiel d 1 mode) Standard Time NTSC 8.35 ms PA L 1 0 m s PA L - M 1 0 m s SECAM 10 ms Generic 8.35 ms EDTV 480p/60 8.35 ms HDTV 720p/60 8.35 ms HDTV 1080p/2 4 20.835 ms HDTV 1 ...

  • Agilent Technologies 6000 Series - page 199

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 199 T o use UART/RS232 triggering T o trigger on a UART (U niversal Asynchr onous Receiver/Transmitt er) signal connect the os cilloscope to t he Rx and Tx lines and set up a trigger condition. RS232 (Recommended Standard 232) is one example of a U ART protocol. 1 Press the More ...

  • Agilent Technologies 6000 Series - page 200

    200 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope 3 Press the Signals sof tk ey to display the U ART/RS232 signals menu. 4 Connect an oscilloscope channel to t he Rx signal in the circuit under test (the t arget system), th en press the Rx so f tk e y and ro tate the E ntry kn ob to s elec t the chan nel. As you press the Rx ...

  • Agilent Technologies 6000 Series - page 201

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 201 8 Press the Bus Config sof tke y and set the follo wing paramet ers. a# B i t s : Set the number of bits in the UART/RS232 w ords to match your targ et system (select able from 5-9 bits). bP a r i t y : Choos e odd, ev en, or none, based on your target system. cB a u d : Sel ...

  • Agilent Technologies 6000 Series - page 202

    202 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope • Rx X:Data: F or use when the target system dat a w ords are 9 bits in length i ncluding the aler t bit (the 9th bit). Trig gers on a data b yte th at y ou spec ify rega rdl ess of the valu e of the 9 th (a lert) b it. T he sp eci fied da ta by te ap plie s to the least si ...

  • Agilent Technologies 6000 Series - page 203

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 203 15 Remember t o set the trigge r mode to Normal (pr ess Mode/Coupling → Mode → Normal ) to prev ent Auto Triggering. ...

  • Agilent Technologies 6000 Series - page 204

    204 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope T o use USB triggering USB trigger will trigger on a St art of Packet (S OP), End of Pack et (EOP) signal, Reset Complete (RC) , Ent er Suspend (Suspend), or Exit Suspend (Exi t Sus) on the dif f erential USB data lines (D+ and D-). USB Lo w Speed and F ull Speed are suppor t ...

  • Agilent Technologies 6000 Series - page 205

    Triggering the Oscilloscope 4 6000 Series Oscilloscope User’s Guide 205 As you press the D+ or D– s oft k ey (o r r ota te th e E nt r y k no b on mix ed-signal os cilloscopes), the D+ and D– label f or the source channel is automatically set and the channel you select is sho wn in t he upper -right corner of t he displa y next to “ USB ” ...

  • Agilent Technologies 6000 Series - page 206

    206 6000 Series Oscilloscope User’s Guide 4 Triggering the Oscilloscope The T rigger Out connector Y ou can select one of the follo wing signals t o be output at the TRIG OUT connector on t he rear panel of the oscilloscope: • Trig ger s • Source freque ncy • Source freque ncy/8 (exc ept 100 MHz BW models) T riggers This is the default sele ...

  • Agilent Technologies 6000 Series - page 207

    207 Agilent T e chnologies Agilent 6000 Series Oscilloscope User’s Guide 5 Making Measurements T o use the XY horizontal mode 208 Math Functions 213 Cursor Measurements 232 Automatic Meas urements 239 Post Acquisition Processing In addition to changing display paramete rs after the acquisition, you c an perform all of the measurements an d math f ...

  • Agilent Technologies 6000 Series - page 208

    208 6000 Series Oscilloscope User’s Guide 5 Making Measurements T o use the XY horizontal mode The XY horizontal mode conver ts the oscilloscope from a vo lts-versus-time display to a vo lts-versus-volts displa y using tw o input channels. Channel 1 is the X-axis in put, channel 2 is the Y -axis input. Y ou can use various transducers so the disp ...

  • Agilent Technologies 6000 Series - page 209

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 209 Figure 21 Exampl e of centering a signal on th e display Figure 22 Signal centered on the di splay 4 Press the Cursors ke y . 5 Set the Y2 cur sor to the top of th e sig nal, and set Y 1 to the bottom o f the signal. A B D C Signal must be centered in “X” ...

  • Agilent Technologies 6000 Series - page 210

    210 6000 Series Oscilloscope User’s Guide 5 Making Measurements N ote the ∆ Y value at t he bottom of t he displa y. In t his exampl e, we are using the Y cursors, but y ou could ha ve used the X cursors in stead. Figure 23 Cursors set on displayed signal 6 Mov e the Y1 and Y2 cursors t o the inte rsection of the signal and the Y axis. Again, n ...

  • Agilent Technologies 6000 Series - page 211

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 211 7 Calculate t he phase difference using t he formula below . Figure 24 Cursors set to center of signal Z- Axis Input in XY Display Mode (Bla nking) When you select the XY disp lay mode, the time base is turned off. Channel 1 is the X -axis input, ch annel 2 is the Y -axis input, and ...

  • Agilent Technologies 6000 Series - page 212

    212 6000 Series Oscilloscope User’s Guide 5 Making Measurements Figure 25 Signals are 90 out of phase Figure 26 Signals are i n phase ...

  • Agilent Technologies 6000 Series - page 213

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 213 Math Functions The Math menu lets you displa y mat h functions on analog channels. Y ou can: • subtract (–) or mu ltiply (*) th e signals acquired on analog channels 1 and 2, then display the result. • integ rate, dif ferentiate, perform an FFT , or the square root function on ...

  • Agilent Technologies 6000 Series - page 214

    214 6000 Series Oscilloscope User’s Guide 5 Making Measurements Math scale and offset Any math function may be manually scaled by pressing the Scale or Offset softke ys and t hen adjusting the value. 1 In th e W av ef orm M ath Me nu f or the se lecte d math fun ctio n, press the Sc ale or Offset sofke ys t o set your o wn scale factors (units/di ...

  • Agilent Technologies 6000 Series - page 215

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 215 Multiply When y ou select 1*2 , channel 1 and channel 2 voltage values are multiplied point by point, and the result is displayed. 1 * 2 is useful for seeing po wer relationships when one of t he channels is proportional t o the current. 1 Press the Math key, p re ss t h e 1*2 sof tk ...

  • Agilent Technologies 6000 Series - page 216

    216 6000 Series Oscilloscope User’s Guide 5 Making Measurements The figure below sho ws an example of multiply . Figure 27 Multiply Channel 1 Channel 2 1 * 2 waveform 1 * 2 Scale 1 * 2 Offset Math Function Math Function ...

  • Agilent Technologies 6000 Series - page 217

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 217 Subtract When y ou select 1– 2 , channel 2 vo lt age values are subtracted from channel 1 v olt age values point b y point, and the result is display ed. Y ou can use 1 – 2 to make a differe ntial measurement or to compare tw o wa veforms. Y ou may need to use a true differential ...

  • Agilent Technologies 6000 Series - page 218

    218 6000 Series Oscilloscope User’s Guide 5 Making Measurements The figure below sho ws an example of subtract. Figure 28 Subtract Channel 1 Channel 2 1 – 2 waveform 1 – 2 Scale 1 – 2 Offset ...

  • Agilent Technologies 6000 Series - page 219

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 219 Differentiate d/dt (differentiate) calculates the di screte time der ivative of the selected source. Y ou can us e differentiate t o measure th e instant aneous slope of a wave form. For exam ple, the slew rate of an operational amplifier m a y be me asured using the differentiate fu ...

  • Agilent Technologies 6000 Series - page 220

    220 6000 Series Oscilloscope User’s Guide 5 Making Measurements • Offset —lets you set y our o wn of fset for the dV/dt math function. The offset value is in units/second where units can be V (V olts), A (Amps), or W (W atts) and is represented by the cent er horizontal g rid line of the display. Press the Offset sof tke y , then turn t he En ...

  • Agilent Technologies 6000 Series - page 221

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 221 Integrate ∫ dt (integ rate) calculat es the int egral of t he selected so urce. Y ou can use integrate t o calculate the energy of a pulse in v olt-seconds or measure the area under a wa vef orm. ∫ dt plot s the inte gral of the sou rc e usi ng th e “Tr apez oid al R ule” . T ...

  • Agilent Technologies 6000 Series - page 222

    222 6000 Series Oscilloscope User’s Guide 5 Making Measurements Figure 30 Integrate and Signal Offset Channel 1 ∫ dt waveform ∫ dt Scale ∫ dt Offset Source select Channel 1 ∫ dt waveform 0 V 0 V ...

  • Agilent Technologies 6000 Series - page 223

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 223 FF T Measurement FFT is used to compute the fast F ourier transform using analog input channels or math functions 1 + 2, 1 – 2, or 1 * 2. FFT t akes the digitized ti me record of the spe cif ied sour ce and transf orms it to t he frequency domain. Whe n the FFT function is selected ...

  • Agilent Technologies 6000 Series - page 224

    224 6000 Series Oscilloscope User’s Guide 5 Making Measurements vertical bandwidth when making FFT measurements. The FFT sample rate is displa yed directly abo ve the softkeys when the FFT menu is displaye d. Aliasing happens when t here are frequency components in the si gnal high er than half the sa mp le ra te. Si nce th e FFT s pect rum is li ...

  • Agilent Technologies 6000 Series - page 225

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 225 Spectral Leakage The FFT operation assumes that t he time record repeats. U nless there is an int egral number of cycles of the sampled wa veform in the reco rd, a discontinuity is created at t he end of th e record. This is referred to as leakage. In order to minimize spectral leaka ...

  • Agilent Technologies 6000 Series - page 226

    226 6000 Series Oscilloscope User’s Guide 5 Making Measurements • Center — sets the FFT sp ectr um frequency represented at the center vertical gr id line of the display. It is possible to set the Cent er to values belo w half the span or abo ve the maximum available frequency , in which case t he display ed spectrum will not t ake up the who ...

  • Agilent Technologies 6000 Series - page 227

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 227 • Scale — lets you set y our o wn vertical scale factors for FFT expressed in dB/div (d ecibels/division). Press th e Scale softkey , t hen turn t he Entry knob t o rescale y our math function. • Offset — lets you set your o wn offset for the FFT . The offset value is in dB a ...

  • Agilent Technologies 6000 Series - page 228

    228 6000 Series Oscilloscope User’s Guide 5 Making Measurements Figure 32 FF T measurements FF T Measurement Hints The number of points acquired f or t he FFT record is 1000 and when frequency span is at maxi mum, all points are displa yed. Once the FFT spectrum is disp layed, the frequency span and center frequency controls are used much lik e t ...

  • Agilent Technologies 6000 Series - page 229

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 229 resolve tw o closely space frequencies. A good way to t est the ability of the FFT to resolve tw o closely spaced frequencies is t o examine the sidebands of an amplitude modulated sine wav e. F or the best ver tical accuracy on peak measurements: • Make sure t he probe attenuation ...

  • Agilent Technologies 6000 Series - page 230

    230 6000 Series Oscilloscope User’s Guide 5 Making Measurements Square Root √ (square root) calculates the square root of th e selected source. In Zoom mode, the √ (square root) function does not display in the zoomed por tion of t he displa y. 1 Press the Math ke y , press t he √ (square root) sof tke y , then press the Source , Scale , or ...

  • Agilent Technologies 6000 Series - page 231

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 231 The figure below sho ws an example of √ (square r oot). Figure 33 Square Root Channel 1 √ waveform √ Scale √ Offset Source select ...

  • Agilent Technologies 6000 Series - page 232

    232 6000 Series Oscilloscope User’s Guide 5 Making Measurements Cursor Measurements Y ou can measure wav eform dat a using cursors. Cursors are horizontal and ver tical markers that indicate X-axis values (usually time) and Y -axis values (usually v oltage) on a select ed wav eform source. The position of the cursors can be moved b y turning the ...

  • Agilent Technologies 6000 Series - page 233

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 233 • Binary — Binar y logic lev els are display ed directly abov e the sof tke ys for the current X1 and X2 cursor positions f or all displa yed channels. • Hex — Hexadecimal logic lev els are displa yed dir ectly abo ve the sof tke ys for the current X1 and X2 cursor positions ...

  • Agilent Technologies 6000 Series - page 234

    234 6000 Series Oscilloscope User’s Guide 5 Making Measurements 4 Select the X and Y sof tke ys t o mak e a measurement. • XY — Press this so ftke y t o select either X cursors or Y cursors for adjustment. The cursor cur rently assigned to the E ntry kn ob di spla ys bri ghter than th e othe r cur sor s. X cursors are ve r tical dashed lines ...

  • Agilent Technologies 6000 Series - page 235

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 235 T u r n t h e E n t r y k n o b t o a d j u s t t h e Y 1 o r Y 2 c u r s o r w h e n i t s softkey is selected. • X1 X2 — Press this sof tke y t o adjust the X1 and X2 cursor s together by turning the Entr y knob. The ∆ X value will remain the same since t he cursors adjust to ...

  • Agilent Technologies 6000 Series - page 236

    236 6000 Series Oscilloscope User’s Guide 5 Making Measurements Cursor Example s Figure 34 Curs ors measure pulse widths other th an middle threshold points Figure 35 Curs ors measure frequency of pulse rin ging ...

  • Agilent Technologies 6000 Series - page 237

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 237 Exp and th e di spla y w ith z oom sw ee p, the n ch arac teri ze the e ven t of i nter est w ith the curs ors . Figure 36 Cursors track zoom sweep Put the X1 cursor on one side of a pulse and t he X2 cursor on the other side of t he pulse. Figure 37 Measuri ng pulse width with curso ...

  • Agilent Technologies 6000 Series - page 238

    238 6000 Series Oscilloscope User’s Guide 5 Making Measurements Press the X1 X2 softk e y and mo ve the cu rso rs tog ether to che ck f or pulse widt h variations in a pulse train. Figure 38 Moving the cursors together to check pulse width variation s ...

  • Agilent Technologies 6000 Series - page 239

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 239 Automatic Measurements The follo wing automa tic measurements can be made in the Quick Meas menu. Time Measurements • Counter • Duty Cy cle • Fre que ncy • Pe ri o d • Rise Time* • Fall Time* • + Width • – Widt h • X at Max* • X at Min* Phase and Delay • Phase ...

  • Agilent Technologies 6000 Series - page 240

    240 6000 Series Oscilloscope User’s Guide 5 Making Measurements Preshoot and Overshoot • Preshoot* • Overshoot* * Measurement on analog channels only. T o make an automatic measurement A brief description of how to ma ke automatic measurements is given on page 96 . Quick Meas mak es aut omatic measurements on an y channel source or an y runni ...

  • Agilent Technologies 6000 Series - page 241

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 241 If a portion of t he wav eform required for a measurement is not display ed or does not display enough resolution to mak e the measurement, the result will displa y “No Edges”, “Clipped”, “Lo w Signal”, “< valu e”, or “> value”, or a similar mes sage to in d ...

  • Agilent Technologies 6000 Series - page 242

    242 6000 Series Oscilloscope User’s Guide 5 Making Measurements thresholds. Each analog channel and the math wav eform can be assigned unique thresho ld values. 3 Press the Ty p e sof tke y t o set the measurement t hreshold to % (percentage of T op and Base value) or t o Absolute (absolut e value.) • P ercent age thresholds can be s et from 5% ...

  • Agilent Technologies 6000 Series - page 243

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 243 • If threshold Ty p e is set to % , the middle t hreshold value can be set from 6% to 94%. 6 Press the Upper sof tke y , then turn t he Entr y knob t o set the upper measurement t hreshold value. Decreasing the upper value below the set middle value will automatically decrease the ...

  • Agilent Technologies 6000 Series - page 244

    244 6000 Series Oscilloscope User’s Guide 5 Making Measurements Counter The 6000 Series oscilloscopes hav e an integ rated hardware frequency count er which counts t he number of cy cles t hat occur within a period of time (known as the gate time ) to mea sure the frequency of a signal. The gate time f or the C oun ter me asu reme nt is autom ati ...

  • Agilent Technologies 6000 Series - page 245

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 245 through the low er and upper threshold levels which eliminates runt pulses. The X cursors sho w what por tion of the wavef orm is being measured. The Y c ursor sho ws t he middle t hreshold point. T o isolate an event for frequency measurement The f ollo wing figure shows ho w to use ...

  • Agilent Technologies 6000 Series - page 246

    246 6000 Series Oscilloscope User’s Guide 5 Making Measurements Fall Time The fall time of a signal is the time dif f erence between the crossing of the upper t hreshold an d th e c ro ssi ng of the l o w er threshold for a negative-going edge. The X cursor sho ws the edge being measure d. Fo r maximum measurement accu racy , set the sweep speed ...

  • Agilent Technologies 6000 Series - page 247

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 247 T o measure the peak of an FFT: 1 Select FF T as th e math func tio n in th e Math menu. 2 Choose Math as the source in th e Quick Meas menu. 3 Choose Maximum and X at Max measurements. Maximum units are in dB and X at Max units are in Her tz for FFT . X at Min X at Min is the X axis ...

  • Agilent Technologies 6000 Series - page 248

    248 6000 Series Oscilloscope User’s Guide 5 Making Measurements 1 Press the Quick Meas & Select and select Delay . Press the Settings softkey to select the source channels and slope for the delay measurement. The default Dela y settings measur e from th e rising edge of channel 1 to the risin g edge of channel 2. 2 Press the Measure Delay sof ...

  • Agilent Technologies 6000 Series - page 249

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 249 1 Press the Settings sof tk ey to select t he source 1 and sour ce 2 channels f or t he phase measurement. The default Phase settings measure from channel 1 to channel 2. The example belo w sho ws a phase measurement between the channel 1 and the mat h d/dt function on channel 1. Fig ...

  • Agilent Technologies 6000 Series - page 250

    250 6000 Series Oscilloscope User’s Guide 5 Making Measurements and ∫ dt when 1-2 or 1+2 is the select ed source if channel 1 and channel 2 are set to dissimilar units in t he channel Probe Units softkey. The f ollowing f igure sho ws the voltage measurement points. Math Measurements and Units Only Peak-Peak, Maximum, Minimum, A ver age, X at M ...

  • Agilent Technologies 6000 Series - page 251

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 251 Amplitude The Amplitude of a wav eform is the dif ference between its T op and Base valu es. The Y cursors sho w the value s being measured. Ave r ag e A v erage is the sum of the wav eform samples divide d by the number of samples o ver one or more full periods. If less than one per ...

  • Agilent Technologies 6000 Series - page 252

    252 6000 Series Oscilloscope User’s Guide 5 Making Measurements RMS RMS (DC) is the root-mean-square value of t he wa vefo r m o ver one or more full periods. If less t han one period is display ed, RMS (DC) av erage is calculated on t he full width of t he displa y. The X cursors sho w what interval of t he wa vef or m is being measured. Std Dev ...

  • Agilent Technologies 6000 Series - page 253

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 253 The mean is calculated as follo ws: where: x = the mean. N = the nu mber of measuremen ts taken. x i = the i th measurement result. The standard deviation is calculated as follo ws: where: σ = the st andard deviation. N = the nu mber of measuremen ts taken. x i = the i th measuremen ...

  • Agilent Technologies 6000 Series - page 254

    254 6000 Series Oscilloscope User’s Guide 5 Making Measurements Top The T op of a wav eform is the mo de (most common value) of the upper par t of the wav eform, or if t he mode is not we ll def ined, the to p is the sa me as Maxi mum. The Y cur sor s ho ws th e val ue being measured. T o isolate a pulse for T op measurement The follo wing figure ...

  • Agilent Technologies 6000 Series - page 255

    Making Measurements 5 6000 Series Oscilloscope User’s Guide 255 Overshoot and Preshoot Measurements Preshoot Preshoot is distortion that precedes a major edge transition expressed as a percentage of Amplitude. The X cursors show which edge is being me asured (edge closes t to the trigger reference point). Digital channel time measurements Automat ...

  • Agilent Technologies 6000 Series - page 256

    256 6000 Series Oscilloscope User’s Guide 5 Making Measurements Overshoot Overshoot is distortion t hat f ollows a ma jor edge transition expressed as a percentage of Amplitude. The X cursors sho w which edge is being me asured (edge closes t to the tr igger reference point). Figure 42 Automatic Oversh oot mea surement Rising edge overshoot = loc ...

  • Agilent Technologies 6000 Series - page 257

    257 Agilent T e chnologies Agilent 6000 Series Oscilloscope User’s Guide 6 Displaying Data Pan and Zoom 258 Antialiasing 26 0 Using the XGA vi deo output 260 Display Settings 261 V arying th e intensity to view signal detail 263 Acquisition Modes 265 Using Serial Decode 271 T o decode I2C data 272 T o decode SPI data 276 T o decode CAN dat a 281 ...

  • Agilent Technologies 6000 Series - page 258

    258 6000 Series Oscilloscope User’s Guide 6 Displaying Data Pan and Zoom The ability to pan (m o ve horizo nt ally) and zoom (expand or compress horizontally) an acqu ired wav eform is import ant because of the additional insight it can reveal about the captured wav eform. This additional insight is of ten gained from seeing the wa vef or m at di ...

  • Agilent Technologies 6000 Series - page 259

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 259 T o pan and zoom a waveform 1 Press the Run/Stop key to stop acquisitions. The Run/Stop key is illuminated red when the oscilloscope is stopped. 2 Tur n the sweep speed knob to zoom horizont ally and turn the volts/division knob to zoom vertically. The ∇ sym bol a t the top of the di s ...

  • Agilent Technologies 6000 Series - page 260

    260 6000 Series Oscilloscope User’s Guide 6 Displaying Data Antialiasing At slo w er sweep speeds, the sample rate is reduced and a proprietar y display algorithm is us ed to minimize the likelihood of aliasing. By default, Antialiasing is enabled. Y ou sho uld lea ve Antialiasing enabled unless there is a specif ic reason to swit ch it off. If y ...

  • Agilent Technologies 6000 Series - page 261

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 261 Display Settings • Press the Display key to vie w t he Display menu. T o manually control Display settings on 6000L models start t he Remote Front Panel (see page 44 ) and select Wa v e f o r m from the Main Menu or press ctrl+W to access the oscilloscope’s Display Menu. Infinite per ...

  • Agilent Technologies 6000 Series - page 262

    262 6000 Series Oscilloscope User’s Guide 6 Displaying Data Grid intensity T o adjust t he grid (g raticule) intensity , press Display & Grid and use the En try kno b to adj ust th e inte nsit y. V ectors (connect the dots) The Agilent 6000 Series oscillosco pes are designed t o operate optimally with vectors on. This mode gives the most real ...

  • Agilent Technologies 6000 Series - page 263

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 263 Using V ectors (Display menu) One of the most fundamental choices yo u must make about your display is whether to draw v ectors (connect t he dots) between the samples, or sim ply let the samples f ill in the wav eform. T o some degree, t his is a matter of personal preference, but it al ...

  • Agilent Technologies 6000 Series - page 264

    264 6000 Series Oscilloscope User’s Guide 6 Displaying Data Figure 43 Amplitude Modulation with No ise Shown at 100% Intensity Figure 44 Amplitude Modulation wi th Noise Shown at 40% Intensity ...

  • Agilent Technologies 6000 Series - page 265

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 265 Acquisition Modes The 6000 Series oscilloscopes hav e the follo wing acquisition modes: • Normal — for most wa vef orms (wit h normal decimating at slo wer sw eep speeds, no av eraging). • Peak Detect — f or displaying narro w pulses t hat occur infrequently (at slo wer sw eep sp ...

  • Agilent Technologies 6000 Series - page 266

    266 6000 Series Oscilloscope User’s Guide 6 Displaying Data Normal Mode In Normal mode at slo wer sw eep speeds, extra samples are decimated (in other w ords, some are t hro wn a way). This mode yields the best display for most wa vef or ms. Peak Detect Mode In P eak Det ect mode at slo wer sweep speeds, minimum and maximum samples are kept in or ...

  • Agilent Technologies 6000 Series - page 267

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 267 Hig h Re solu tion mode is eq uiva len t to the A v era ging mode with #A v erages=1; how ever , y ou can tu r n on Realtime sam pling in the H igh R eso luti on mo de. High Resolution mode can be used on bot h single-shot and repetitive signals and it does not slo w wa veform update bec ...

  • Agilent Technologies 6000 Series - page 268

    268 6000 Series Oscilloscope User’s Guide 6 Displaying Data T o use the Averaging mode 1 Press the Acquire ke y , then p res s the Acq Mode softkey until the A v eraging mode is selected. 2 Press the #Avgs softkey and turn the Entr y knob to set t he number of a verages that best elim inates t he noise fr om the display ed wavef orm. The num ber ...

  • Agilent Technologies 6000 Series - page 269

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 269 Figure 46 128 A verages used to reduce random noise Realtime Sampling Option Realtime sampling specifies th at t he oscilloscope produce the wav eform display fr om samples collected during one trigger ev ent (t hat is, one acquisition). Use Realtime sampling to capture infrequent trigge ...

  • Agilent Technologies 6000 Series - page 270

    270 6000 Series Oscilloscope User’s Guide 6 Displaying Data • The oscilloscope produces the wav eform display from samples collected from multiple ac quisitions. In t his case, the reconstruction f ilter is not used. Realtime Sampling and Oscilloscope Bandwidth T o accurately reproduce a sam pled wav eform, t he sample rate should be at least f ...

  • Agilent Technologies 6000 Series - page 271

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 271 Using Serial Decode Agilent’s hardware accelerated se rial decode options can be licensed on 4-channel or 4+16-ch annel 6000 Series oscilloscopes. Three serial decode licenses are a vailable: • The N5423A (Option LSS) license pro vides the ability to decode I 2 C (Inter-IC) and SPI ( ...

  • Agilent Technologies 6000 Series - page 272

    272 6000 Series Oscilloscope User’s Guide 6 Displaying Data T o decode I 2 C data T o manually control Serial Decode on 6000L models st art t he Remote Front Panel (see page 44 ) and select Wa v e f o r m from the Main Menu or press ctrl+A to ac c ess the osci lloscope’s Acquire Menu. 1 Select the I 2 C serial decode mode: a Press the Acquire k ...

  • Agilent Technologies 6000 Series - page 273

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 273 2 Specify the I 2 C signals: a Press the Settings sof tke y to access t he I 2 C Signals Menu. b Press the SCL so ftk ey , and use the E ntry kno b to s ele ct the channel probing the clock signal. c Press the SDA softk e y , a nd u se the Entry kn ob to sele ct the channel probing the d ...

  • Agilent Technologies 6000 Series - page 274

    274 6000 Series Oscilloscope User’s Guide 6 Displaying Data Y ou can use the Zoom horizont al sweep mode for easier navigation of the acquired dat a. Interpreting Decode d I 2 C Data NOTE If the setup does not produce a stable trigger , the I 2 C signal may be slow enough that the oscilloscope is AutoT riggering . Press the Mode/Coupling key , th ...

  • Agilent Technologies 6000 Series - page 275

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 275 • White lines sho w an idle bus. • Blue rectang les show an acti v e bus (inside a packet/frame). • In the decoded hexadecimal dat a: • Address val ues appear at t he star t of a frame. • W rite addresses appear in light-blue along with t he “W” character . • Read address ...

  • Agilent Technologies 6000 Series - page 276

    276 6000 Series Oscilloscope User’s Guide 6 Displaying Data T o decode SPI data 1 Select the SPI serial decode mode: a Press the Acquire ke y. b Press the Serial Decode sof tk ey. c In the Serial Decode Menu, press the Mode softke y. d Use the Entr y knob (or repeated l y press and release t he Mode softkey) to select the SPI serial decode m ode. ...

  • Agilent Technologies 6000 Series - page 277

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 277 2 Specify the SPI signals: a Press the Settings sof tk ey to access t he SPI Signals Menu. NOTE If you have already set up an SPI trigger , th e signals and their trigger or threshold levels have already been specified, and you can continue on with step 4 . Changing SPI signals in the Se ...

  • Agilent Technologies 6000 Series - page 278

    278 6000 Series Oscilloscope User’s Guide 6 Displaying Data b Press the Clock softk e y , and u se the Entry kn ob to sele ct the channel probing the clock sign al. c Press the rising or falling edge sof tke y to specify the edge that the clock occurs on. d Press the Data sof tke y , and use t he Entr y knob t o select th e channel probing the da ...

  • Agilent Technologies 6000 Series - page 279

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 279 Y ou can use the Zoom horizont al sweep mode for easier navigation of the acquired dat a. Interpreting Decode d SPI Data • White lines sho w an idle bus. • Blue rectang les show an acti v e bus (inside a packet/frame). • The number of clock s in a fram e appears in light-blue abov ...

  • Agilent Technologies 6000 Series - page 280

    280 6000 Series Oscilloscope User’s Guide 6 Displaying Data • Aliased bus values (undersampled or indeter minate) are drawn in red. • U nknown bus values (undefined or error conditions) are drawn in red. ...

  • Agilent Technologies 6000 Series - page 281

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 281 T o decode CAN data 1 Con nec t the C AN sign al to o ne o f the o scil losc ope ’s in pu t channels. 2 Set up the trigger mode as described in “Triggering the Oscilloscope ” on page 127. Y ou can use C AN trigge r or another trigger type. 3 Select the CAN serial decode mode: a Pre ...

  • Agilent Technologies 6000 Series - page 282

    282 6000 Series Oscilloscope User’s Guide 6 Displaying Data 4 Specify the C AN signal: a Press the Settings sof tke y to access t he CAN Signals Menu. 5 Press the Source s of t key , a n d u se t he En t r y kn ob t o s el ec t t he channel f or t he CAN signal. Mak e sure t he trigger or threshold levels are set to the middle of t he CAN signal. ...

  • Agilent Technologies 6000 Series - page 283

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 283 bus is measured. This controls th e point within t he bit’s time where the bit value is captured. 8 Set the trigger level. • F or analog channels, turn t he Trigger Level knob. • F or digital channels, press the D15 Thru D0 ke y an d t h e Thresholds softkey to access the t hreshol ...

  • Agilent Technologies 6000 Series - page 284

    284 6000 Series Oscilloscope User’s Guide 6 Displaying Data Interpreting Decode d CAN Data • Frame ID appears in hex d igits in ye llow . F rames of 11 or 29 bits are automatically detected. • Remote frame (RMT) appears in green. • Data lengt h code (DLC) appears in blue. • Data b yt es appear in hex digits in white for data frames. • C ...

  • Agilent Technologies 6000 Series - page 285

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 285 • Red dots in the decode line indicat e that there is data that is not being display ed. Scroll or expand the horizontal scale t o view the information. • Aliased bus values (undersampled or indeter minate) are drawn in red. • U nknown bus values (undefined or error conditions) are ...

  • Agilent Technologies 6000 Series - page 286

    286 6000 Series Oscilloscope User’s Guide 6 Displaying Data CAN T otalizer The CAN totalizer pro vides a direct measure of bus quality and eff iciency. The CAN tot alizer measures tot al CAN frames, f lagged er ror frames, o verload frames, and bus utilization. The tot alizer is always running (counting frames and calculating percentages) and is ...

  • Agilent Technologies 6000 Series - page 287

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 287 Overload Frame Count and Percent Error Frame Count and Percent Bus Utilization Percentage Total Fram e Count ...

  • Agilent Technologies 6000 Series - page 288

    288 6000 Series Oscilloscope User’s Guide 6 Displaying Data T o decode LIN data 1 Select the LIN serial decode mode: a Press the Acquire ke y. b Press the Serial Decode sof tk ey. c In the Serial Decode Menu, press the Mode softke y. d Use the Entr y knob (or repeated l y press and release t he Mode softkey) to select the LIN serial decode mo de. ...

  • Agilent Technologies 6000 Series - page 289

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 289 3 Specify the LIN signal: a Press the Settings sof tk ey to access t he LIN Signals Menu. LIN signal source LIN baud rate Signal sample point Sync Break selection Trigger level or threshold Currently selected channel LIN trigger Return to previous menu LIN standar d selection Decoded LIN ...

  • Agilent Technologies 6000 Series - page 290

    290 6000 Series Oscilloscope User’s Guide 6 Displaying Data b Press the Source sof tke y , and use the Entr y knob to selec t the channel probing the LIN signal. c Repeatedly press and release the Baud sof tk ey to specify the L IN s igna l bau d ra te. d Repeatedly press and release the Smpl Pt sof tk ey to select the sample point. This controls ...

  • Agilent Technologies 6000 Series - page 291

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 291 g If the decode line does not appe ar on the d ispla y , press the up- arro w softk e y to r eturn to the p rev ious menu , then press the Decode softkey. 5 If the oscilloscope is stopped, press t he Run/Stop key t o acquire and decode dat a. Y ou can use the Zoom horizont al sweep mode ...

  • Agilent Technologies 6000 Series - page 292

    292 6000 Series Oscilloscope User’s Guide 6 Displaying Data Interpreting Decoded LIN Data ...

  • Agilent Technologies 6000 Series - page 293

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 293 • White traces sho w an idle bus (LIN 1.3 only). • Blue bi-lev el trace shows an activ e bus (inside a packet/fra me). • The hexadecimal ID and parity bits (if enabled) appear in yello w . If a parity error is detected the hexadecimal ID and parity bits (if enabled) appear in red. ...

  • Agilent Technologies 6000 Series - page 294

    294 6000 Series Oscilloscope User’s Guide 6 Displaying Data T o decode FlexRay data T o decode FlexRay data, y ou need a four -channel 6000 Series mix ed signal oscilloscope, t he N5432A FlexRa y triggering and decode option, the A gilent VPT1000 protocol analyzer , and its MSO communications cable. 1 Set up the oscilloscope and t he VPT1000. See ...

  • Agilent Technologies 6000 Series - page 295

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 295 When the FlexRay mode is selected, you can use t he Settings softkey to access the VPT1000 Menu for changing the VPT1000 control/operating modes. 4 If the decode line does not appear on t he display , press the Decode so f tkey t o tu r n it on. Th e VP T10 00 m us t be con ne ct ed and ...

  • Agilent Technologies 6000 Series - page 296

    296 6000 Series Oscilloscope User’s Guide 6 Displaying Data Interpreting Decode d FlexRay Frame Data The FlexRay decode displa y sho ws fram e decoding (bottom ro w) and if the VPT1000 is in the synchronous monitoring mode, global time-schedule decoding (top ro w). Frame Decoding (bottom row of decode displa y) • Frame type (NORM, SYNC, SUP , N ...

  • Agilent Technologies 6000 Series - page 297

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 297 Interpreting Decoded FlexRay Ti me Data Global T ime-Schedule Decoding (top ro w of decode display) • Segment type: static = SS in or ange, dynamic = DS in green, Symbol in yello w , Idle = NIT (network idle time) in whit e. • Segment number: decimal digits in orange (st atic) or gre ...

  • Agilent Technologies 6000 Series - page 298

    298 6000 Series Oscilloscope User’s Guide 6 Displaying Data FlexRay T otalizer The FlexRa y tot alizer consists of cou nters t hat pro vide a direct measure of bus quality and eff iciency. The tot alizer is running, cou nting fr ames and calculating percentages, even when the oscilloscope is stoppe d (not acquiring dat a). The tot alizer appears ...

  • Agilent Technologies 6000 Series - page 299

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 299 Counters • The FRAMES counter gives a real -time count of all received frames. • The NULL counter gives t he number and percent age of null frames. • The SYNC counter gives the nu mber and percent age of sync frames. Null Frame Count and Percent Total Frame Count Sync Frame Count a ...

  • Agilent Technologies 6000 Series - page 300

    300 6000 Series Oscilloscope User’s Guide 6 Displaying Data T o decode UART/RS232 data 1 Select the U ART/RS232 serial decode mode: a Press the Acquire ke y. b Press the Serial Decode sof tk ey. c In the Serial Decode Menu, press the Mode softke y. d Use the Entr y knob (or repeated l y press and release t he Mode sof tk ey) to select t he UART/R ...

  • Agilent Technologies 6000 Series - page 301

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 301 2 Specify the UART/RS232 signals: a Press the Settings sof tk ey to access the UART/RS232 decode settings menu. b Press the Signals sof tke y , and select the oscilloscope channels that you hav e connected to t he Rx and Tx signals. NOTE Changing UART/RS232 signals in the Serial Decode s ...

  • Agilent Technologies 6000 Series - page 302

    302 6000 Series Oscilloscope User’s Guide 6 Displaying Data See the UART/RS23 2 triggering section on page page 199 f or de tailed instr uctions. 3 Press the Return t o previous menu (up arro w) sof tke y. 4 Press the Bus Config sof tk ey. a# B i t s : Set the number of bits in the UART/RS232 w ords to match your targ et system (select able from ...

  • Agilent Technologies 6000 Series - page 303

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 303 7 Optional: Press the Framing softkey and select a value. In the decode display the chosen valu e will b e display ed in lig ht blue. Ho wev er , if a parity er ror occurs the dat a will be display ed in red. 8 Make sure the trigger or threshold lev els are set to the middle of the signa ...

  • Agilent Technologies 6000 Series - page 304

    304 6000 Series Oscilloscope User’s Guide 6 Displaying Data Interpreting Decoded UART/RS232 Data • An idle bus is shown in white. • An active bus is sho wn in dark blue, wit h v er tical lines designating the st ar t and end of each data wor d. • When using 5-8 bit formats, the decoded dat a is display ed in white (in binar y , hex, or ASCI ...

  • Agilent Technologies 6000 Series - page 305

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 305 • An unkno wn (undef ined) bus is sho wn in red. • A parity error will cause the associat ed data w ord to be sho wn in red, which inclu des the 5-8 dat a bits and the optional 9th bit. ...

  • Agilent Technologies 6000 Series - page 306

    306 6000 Series Oscilloscope User’s Guide 6 Displaying Data UART/RS232 T otalizer The U ART/RS232 tot alizer consists of count ers that pro vide a direct mea sure of bus quali ty and eff iciency. The tot alizer appears on screen whenever U ART/RS232 Decode is ON in the Serial Decode Menu. The tot alizer is running, counti ng frames and calculatin ...

  • Agilent Technologies 6000 Series - page 307

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 307 T o reduce the random noise on a signal If the signal you are pr obing is noisy , yo u can set up t he oscilloscope to reduce the no ise on the display ed wav eform. First, you stabilize t he display ed wavef orm by removing the noise from the trigger pat h. Second, you reduce th e noise ...

  • Agilent Technologies 6000 Series - page 308

    308 6000 Series Oscilloscope User’s Guide 6 Displaying Data LF Reject Lo w-frequency reject (LF reject) adds a high-pass filter wit h the 3-dB point at 50 kHz. LF reject remo ves lo w-frequency sign als, such as po wer line noise, from the trigger path. • Press Mode/Coupling & Coupling & LF Reject . Noise rejection Noise reject increase ...

  • Agilent Technologies 6000 Series - page 309

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 309 T o capture glitches or narrow puls es with peak detect and infinite persistence A glit ch is a rapid change in the wav eform that is usually narro w as compared to t he wav eform. P eak detect mod e can be used to more eas ily vie w g litches or nar ro w pulses. In peak detect mode, nar ...

  • Agilent Technologies 6000 Series - page 310

    310 6000 Series Oscilloscope User’s Guide 6 Displaying Data Figure 48 15 ns Narrow Pulse, 20 ms /div, Peak Detect Mode Using peak detect mode to find a glitch 1 Connect a signal to the oscilloscope and obt ain a stable display. 2 T o f ind the g litch, press t he Acquire k ey , then , pr ess th e Acq Mode softkey until Peak Detect is selected. 3 ...

  • Agilent Technologies 6000 Series - page 311

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 311 4 Characterize the g lit ch with zoom sweep: a Press the Menu/Zoom k ey , then pres s the Zoom sof tkey. b T o obt ain a better resolu tion of the g lit ch, expand t he time base. c Use the horizont al position knob ( ) to pan t hrough the wa v ef orm to s et the exp ande d porti on of t ...

  • Agilent Technologies 6000 Series - page 312

    312 6000 Series Oscilloscope User’s Guide 6 Displaying Data How AutoScale W orks A utoSc ale a utom atic all y co nfigu res th e osc illo sco pe to b est display the in put signals by analyzing any wav eforms present at each channel and at t he exter nal trigger input. This includes the digit al channels o n MSO models . AutoScale finds, turns on ...

  • Agilent Technologies 6000 Series - page 313

    Displaying Data 6 6000 Series Oscilloscope User’s Guide 313 Specifying the Channels Displayed After AutoScale The Channels softke y selection determines which channels will be display ed on subsequent AutoScales. • All Channels — The next time y ou press AutoScale , all channels that meet the r equi reme nts of A utoS cale will be d ispl ay e ...

  • Agilent Technologies 6000 Series - page 314

    314 6000 Series Oscilloscope User’s Guide 6 Displaying Data ...

  • Agilent Technologies 6000 Series - page 315

    315 Agilent T e chnologies Agilent 6000 Series Oscilloscope User’s Guide 7 Saving and Printing Data Printing the oscilloscope’ s display 316 Supported Printers 318 Saving oscilloscope data 320 Selecting a destination for your saved data 321 Selecting a file name 322 W aveform T race and Oscilloscope Setup 324 Display Image and W aveform Data Fi ...

  • Agilent Technologies 6000 Series - page 316

    316 6000 Series Oscilloscope User’s Guide 7 Saving and Printing Data Printing the oscilloscope’ s display T o print t he oscilloscope’s displa y: 1 Connect a USB printer t o either t he USB por t on the front panel or the rect angular USB host por t on the rear panel. A list of support ed printers is on page 318 . 2 Press the Print key ( la b ...

  • Agilent Technologies 6000 Series - page 317

    Saving and Printing Data 7 6000 Series Oscilloscope User’s Guide 317 Selecting print options Press the Options softk e y to c hang e the fo llo w ing opti ons : • Factors — Select Factors if y ou want the oscilloscope scale factors to be i ncluded on your printout. Oscilloscope scale factors include vertical, horizont al, trigger , acquisitio ...

  • Agilent Technologies 6000 Series - page 318

    318 6000 Series Oscilloscope User’s Guide 7 Saving and Printing Data Supported Printers The follo wing HP printer s, a vailable i n stores at th e time this manual was written, have been t ested and found to be compatible with the Inf iniiV ision 6000 Series oscilloscopes. Visit www .agilent.com/find/mso6000 and select T echnical Support , then F ...

  • Agilent Technologies 6000 Series - page 319

    Saving and Printing Data 7 6000 Series Oscilloscope User’s Guide 319 Deskjet 980 Deskjet 990C Deskjet 995 Deskjet 12 20C & 1125C Deskjet 38 16 & 3820 Deskjet 55 50 & 5551 Deskjet 61 22 & 6127 Deskjet 56 00 & 5100 & 5800 Deskjet 65 40 & 6520 Deskjet 5740 Deskjet 6840 Deskjet 37 40 & 3840 Deskjet CP 1160 & CP1700 ...

  • Agilent Technologies 6000 Series - page 320

    320 6000 Series Oscilloscope User’s Guide 7 Saving and Printing Data Saving oscilloscope data Here are a f ew points about saving oscilloscope data : • Y ou can sav e a wave form trace and recall it later . The recalled trace appears in cyan (blue). • Y ou can s a ve oscilloscope setup par ameters and recall t hem later . The setup file st or ...

  • Agilent Technologies 6000 Series - page 321

    Saving and Printing Data 7 6000 Series Oscilloscope User’s Guide 321 Selecting a destinatio n for your saved data Press Save/Recall → Save to access t he Sav e menu and select a destination for sa ving your data. Press to go/Location/Save to softkey (Using the oscilloscope’ s File Explorer) The second sof tk ey from the left in the Sav e menu ...

  • Agilent Technologies 6000 Series - page 322

    322 6000 Series Oscilloscope User’s Guide 7 Saving and Printing Data If one or more USB storage devices are connect ed to the os cill osco pe, y ou can na viga te to the USB d evi ce us ing the sam e method. The follo wing display im age sho ws an image ready to be sav ed to a subfolder called “Rise time” on a USB device. Push the E ntry kn o ...

  • Agilent Technologies 6000 Series - page 323

    Saving and Printing Data 7 6000 Series Oscilloscope User’s Guide 323 Spell softkey and press the Enter so ftke y to c reate the ne w fil e name. 3 Y ou can press t he Enter so f t ke y o r t h e En t r y kn o b t o mov e t h e cursor f or ward within t he file name. 4 Y ou can press the Delet e Character softk e y to d elet e the curr ent char ac ...

  • Agilent Technologies 6000 Series - page 324

    324 6000 Series Oscilloscope User’s Guide 7 Saving and Printing Data W aveform T race and Oscilloscope Se tup When the Tr a c e & S e t u p option is selected from t he Format softkey , bot h wav eform trace and oscilloscope setup are sav ed to the USB d riv e o r the o scil los cope ’s in ternal mem or y. After saving, y ou can choose to r ...

  • Agilent Technologies 6000 Series - page 325

    Saving and Printing Data 7 6000 Series Oscilloscope User’s Guide 325 • ASCII XY data file - This creates a fi le of comma-separated variables for each displa yed channel. If the oscilloscope acquisition is stopped, then data records great er than 1000 points can be writte n. This f or mat is also suitab le f or spreadsheets. • BIN data file - ...

  • Agilent Technologies 6000 Series - page 326

    326 6000 Series Oscilloscope User’s Guide 7 Saving and Printing Data The Invert Graticule Colors option can be used to reduce t he amount of black ink it takes to print oscilloscope images by changing the black back ground to white. Invert Graticule Colors is the default mode. Invert Graticule Colors is a vailable when the BMP and PNG formats are ...

  • Agilent Technologies 6000 Series - page 327

    Saving and Printing Data 7 6000 Series Oscilloscope User’s Guide 327 The Length control will perform a “1 of n” decimation of the data when necessar y. For exam ple: if t he Length is set to 1000, and you are displa ying a record that is 5000 data points in length, four of each five data po ints will be decimat ed, creating an output file 100 ...

  • Agilent Technologies 6000 Series - page 328

    328 6000 Series Oscilloscope User’s Guide 7 Saving and Printing Data T o recall waveform trace and/or oscilloscope setup A recalled trace is typically us ed for a quick comparison of measurement results. F or example, y ou might sav e a trace of a wav eform to use as a reference, then mak e a similar measurement on a t est system and then recall ...

  • Agilent Technologies 6000 Series - page 329

    Saving and Printing Data 7 6000 Series Oscilloscope User’s Guide 329 When the USB storage device is connected to the oscilloscope’s front or rear USB host port, a smal l four -color circle icon may be display ed brief ly as the USB device is read. Y ou do not need t o “eject” the USB device before remo ving it. Simpl y ensu re that any file ...

  • Agilent Technologies 6000 Series - page 330

    330 6000 Series Oscilloscope User’s Guide 7 Saving and Printing Data T o use the file explorer Files can be loaded and delet ed using the fi le explorer . Y ou can cr eate direct ories on a USB mass st orage device using your PC or other instrument. Y ou can na vigate t o an y direct or y on the USB device by rotating the E ntr y knob and pressin ...

  • Agilent Technologies 6000 Series - page 331

    Saving and Printing Data 7 6000 Series Oscilloscope User’s Guide 331 Secure Environment Mode Option Secure environment mode is com p liant to National Industrial Security Program Operating Manual (NISPOM) Chapter 8 requirements. Secure environment mode is ca lled option SEC when it is or de re d wi th th e o sc ill os cop e. Wh en adding secure e ...

  • Agilent Technologies 6000 Series - page 332

    332 6000 Series Oscilloscope User’s Guide 7 Saving and Printing Data Ta b l e 1 8 Ordering the Secure En vironment Mode Option Ordering the Secure Environment Mode Option New oscilloscope purchase ... Order Option SEC. After oscilloscope purchase, i f you have not saved confidential trace or setups on the oscilloscop e... Order N5427A and return ...

  • Agilent Technologies 6000 Series - page 333

    333 Agilent T e chnologies Agilent 6000 Series Oscilloscope User’s Guide 8 Reference Upgrading to an MSO or adding memory depth 334 Software and firmware updates 334 T o set up the I/O port 335 Using the 10 MHz refe rence clock 336 T o supply a sample clock to the oscilloscope 336 T o synchronize the timebase of two or more instruments 338 T o ch ...

  • Agilent Technologies 6000 Series - page 334

    334 6000 Series Oscilloscope User’s Guide 8 Reference Upgrading to an MSO or adding memory depth A license can be installed t o acti vate th e digital channels of an oscilloscope that was not originally ordered as a mix ed-signal oscilloscope (MSO). This incl udes 6000A Series and 6000L Series oscilloscopes. A mix ed signal oscilloscope has analo ...

  • Agilent Technologies 6000 Series - page 335

    Reference 8 6000 Series Oscilloscope User’s Guide 335 T o set up the I/O port The oscilloscope can be control led via GPIB, LAN, or USB. The oscilloscope’s I/O configurat ion, including its IP address and hostname, can be view ed by pressing Utility & I/O . T o change the I/O contro ller settings, press the Configure softke y , and choose t ...

  • Agilent Technologies 6000 Series - page 336

    336 6000 Series Oscilloscope User’s Guide 8 Reference Using the 10 MHz reference clock The 10 MHz REF BNC connector on the rear panel is pro vided so you c an : • Supply a more accurate sample clock signal to the oscilloscope, or • Synchronize the timebase of tw o or more ins truments. Sample clock and freq uency counte r accu racy The oscill ...

  • Agilent Technologies 6000 Series - page 337

    Reference 8 6000 Series Oscilloscope User’s Guide 337 2 Press Utility & Options & Rear Panel & Ref Signal . 3 Use the Entr y Knob and the Ref Signal sof tk ey to select 10 MHz input . A black locked padlock icon will appear at the top of the display. If the extern ally supplied sample clock varies greate r than 0.5% from 10 MHz a soft ...

  • Agilent Technologies 6000 Series - page 338

    338 6000 Series Oscilloscope User’s Guide 8 Reference T o synchronize the timebase of two or more instruments The oscilloscope can output it’s 10 MHz system clock for the purpose of synchronization with ot her instr uments. 1 Connect a BNC cable to the BNC connector labeled 10 MHz REF on the rear panel of the o scilloscope. 2 Connect the ot her ...

  • Agilent Technologies 6000 Series - page 339

    Reference 8 6000 Series Oscilloscope User’s Guide 339 T o return the instrument Before shipping the oscilloscope t o Agilen t T echnologies, contact your nearest Agilent Techno logies sales or service off ice f or additional det ails. Information on contacting A gilent T echnologies can be fou nd at www .agilent.com/f ind/cont actus . 1 W rite th ...

  • Agilent Technologies 6000 Series - page 340

    340 6000 Series Oscilloscope User’s Guide 8 Reference Digital channel signal fidelity: Probe impedance and grounding Y ou may encount er problems when using t he mixed-signal oscilloscope that are related t o probing. These pr oblems fall into two categories: probe loading and probe grounding. Probe loading problems generally af f ect t he circui ...

  • Agilent Technologies 6000 Series - page 341

    Reference 8 6000 Series Oscilloscope User’s Guide 341 Figure 49 DC and Low -Frequency Probe Equivalent Circuit Figure 50 High-Fre quency Probe Equivalent Circuit The impedance plots f or t he tw o mo dels are sho wn in t hese figu res. By comparing the two plots, y ou can see t hat both t he series tip resist or and the cable’s characteristic i ...

  • Agilent Technologies 6000 Series - page 342

    342 6000 Series Oscilloscope User’s Guide 8 Reference Figure 51 Impedance versus Frequency fo r Both Probe Circuit Models The logic pr obes are represented by the high-frequency c ircuit model shown abo ve. They are designed to provide as much series tip resist ance as possible. Stray tip capacitance t o ground is minimized b y the proper mechani ...

  • Agilent Technologies 6000 Series - page 343

    Reference 8 6000 Series Oscilloscope User’s Guide 343 Sharing one probe ground with man y probes for ces all the curr ent that flo ws in to ea ch pr obe to ret urn thr oug h the s ame common g round inductance of the probe whose ground return is used. The result is increase d current ( di ) in the above equation, and, depending on the transition ...

  • Agilent Technologies 6000 Series - page 344

    344 6000 Series Oscilloscope User’s Guide 8 Reference Best Probing Practices Because of t he variables L , di , and dt , you ma y be unsure ho w much margin is available in your measurement setup. The f ollowing are g uidelines for good probing practices: • The ground lead from each digital channel group (D15–D8 and D7–D0) should be attache ...

  • Agilent Technologies 6000 Series - page 345

    Reference 8 6000 Series Oscilloscope User’s Guide 345 T o replace digital probe leads If y ou need to remov e a probe lead from the cable, insert a paper clip or other small point e d o bjec t into the si de o f the cable assembly , and push t o release the latch while pulling out the probe lead. F or ot her replacement parts, consult t he Infini ...

  • Agilent Technologies 6000 Series - page 346

    346 6000 Series Oscilloscope User’s Guide 8 Reference Binary Data (.bin) The binar y data format st ores wa veform data in binar y format and pro vides dat a headers that describe that dat a. Because the dat a is in binar y format, the size of t he file is appro ximately 5 times smaller than the XYPairs format. If more th an one source is on, y o ...

  • Agilent Technologies 6000 Series - page 347

    Reference 8 6000 Series Oscilloscope User’s Guide 347 File Size A 3 2-bi t inte ger th at i s the n umbe r of b yte s that are i n the fi le. Number of W aveforms A 32 -bit inte ger th at i s the n umbe r of wav eforms that are st ored in the f ile. Wa v e f o r m H e a d e r It is possible to s tore more t han one wav eform in th e file, and eac ...

  • Agilent Technologies 6000 Series - page 348

    348 6000 Series Oscilloscope User’s Guide 8 Reference X Display Range A 32-bit f loat that is t he X-axis duration of t he wav eform that is display ed. For time domain wa vef or ms, it is the duration of time across the dis p la y. If the value is zero t hen no dat a has been acquired. X Display Origin A 64-bit double that is t he X-axis value a ...

  • Agilent Technologies 6000 Series - page 349

    Reference 8 6000 Series Oscilloscope User’s Guide 349 Tim e A16-bit character ar ra y , left blank in t he 6000 Series oscilloscope. Frame A 2 4 by te ch arac ter a rra y that is th e mod el n umbe r and serial number of the o scilloscope in the format of: MODEL#:SERIAL#. Wa v e f o r m L a b e l A 16 byte character array that cont ains th e labe ...

  • Agilent Technologies 6000 Series - page 350

    350 6000 Series Oscilloscope User’s Guide 8 Reference Wa v e f o r m D a t a H e a d e r A wav eform ma y have more than one data set. Each wavef orm data set will have a wa vef or m data header . The wa vef or m data header consists of in f or mation about the wavef orm data set. This header is store d immediately before the dat a set. W aveform ...

  • Agilent Technologies 6000 Series - page 351

    Reference 8 6000 Series Oscilloscope User’s Guide 351 Examples of Binary Files Single Acquisition Mult iple Analog Channels The follo wing picture sho ws a binar y f ile of a sing le acquisition with multiple analog channels. File Header 12 bytes Number of W aveforms = N Number of W aveform Buffers = 1 Buffer T ype = 1 (floating point) Bytes per ...

  • Agilent Technologies 6000 Series - page 352

    352 6000 Series Oscilloscope User’s Guide 8 Reference Single Acquisition All Pods Logic Channels The follo wing picture sho ws a binar y f ile of a sing le acquisition with all pods for the logic channels sav ed. File Header 12 bytes W aveform Header 2 140 bytes W aveform Data Header 1 12 bytes Pod 1 Timing Data buffer size W aveform Data Header ...

  • Agilent Technologies 6000 Series - page 353

    Reference 8 6000 Series Oscilloscope User’s Guide 353 Minimum and Maximum V alues in CSV Files If you are running a Quick Me asurement Minimum or Maximum measurement, t he minimum an d maximum values shown in the Quick Measurement display ma y not appear in the CSV f ile. Explanation: When the osci lloscope’s sample ra te is 4 GSa/s, a sample w ...

  • Agilent Technologies 6000 Series - page 354

    354 6000 Series Oscilloscope User’s Guide 8 Reference ...

  • Agilent Technologies 6000 Series - page 355

    355 Agilent T e chnologies Agilent 6000 Series Oscilloscope User’s Guide 9 Power and Environmental Conditions Power Requirements 356 Measurement Category 357 Environmental Conditions 359 Specifica tions 360 Acknowledgements 360 Contact us 361 This chapter describes t he po wer requirements and environmental con ditions appropriate for the A gilen ...

  • Agilent Technologies 6000 Series - page 356

    356 6000 Series Oscilloscope User’s Guide 9 Power and Environmental Conditions Power Requirements Line voltage range ~ Line 120 W max, 96-144 V/48-440 Hz, 192-288 V/48-66 Hz, automatic selection Line frequency 50/60 Hz, 100-240 V AC; 440 Hz, 100-132 V A C Power usage 110 W max ...

  • Agilent Technologies 6000 Series - page 357

    Power and Environmental Conditions 9 6000 Series Oscilloscope User’s Guide 357 Measurement Category Measurement Category The 6000 Series oscilloscope is intended t o be used f or measurements in Measurement Categor y I. Measurement Category Definitions Measurement categor y I is f or measurements performed on circuits not directl y connect ed to ...

  • Agilent Technologies 6000 Series - page 358

    358 6000 Series Oscilloscope User’s Guide 9 Power and Environmental Conditions T ransient Withstand Capability CAUTION Maximum input voltage for analog inpu ts CA T I 300 V rms, 400 Vpk; transient overvoltage 1.6 kVpk CA T II 100 V rms, 400 Vpk with N2863A 10:1 probe: CA T I 600 V , CA T II 300 V (DC + peak AC) with 10073C 10:1 probe: CA T I 500 ...

  • Agilent Technologies 6000 Series - page 359

    Power and Environmental Conditions 9 6000 Series Oscilloscope User’s Guide 359 Environmental Conditions Environment Indoor use only. Ambient temperature Operating –10 °C to +55 °C; non-operating –51 °C to +71 °C Humidity Operating 95% RH at 40 °C f or 24 hr; non-operating 90% RH at 65 °C for 24 hr Altitude Operating to 4,570 m (15,000 f ...

  • Agilent Technologies 6000 Series - page 360

    360 6000 Series Oscilloscope User’s Guide 9 Power and Environmental Conditions Specifications Please see the Inf iniiVision 6000 Series Oscilloscopes Data Sheet f or complete, up-to-date specifications and characteristics. T o download a cop y of the d ata sheet please visit: www .agilent.com/find/mso6000 and select Library , t hen select Specifi ...

  • Agilent Technologies 6000 Series - page 361

    9 6000 Series Oscilloscope User’s Guide 361 Contact us Americas Canada (8 77) 894-44 14 Latin Ameri ca 305 269 7500 United States (800) 829-4444 Asia Pacifi c Australia 1 800 629 485 China 800 810 01 89 Hong Kong 80 0 938 693 India 1 800 112 9 29 Japan 81 426 56 7832 Korea 080 7 69 0800 Malaysia 1 800 88 8 848 Singapore 1 80 0 375 8100 T aiwan 08 ...

  • Agilent Technologies 6000 Series - page 362

    362 6000 Series Oscilloscope User’s Guide 9 ...

  • Agilent Technologies 6000 Series - page 363

    6000 Series Oscilloscopes User’s Guide 363 Index Symbols (-)Width measurement , 246 (+)Width measurement , 246 Numerics 1*2 math function , 21 5 1-2 math function , 217 232 , 109 6000L , 8 , 21 A about oscilloscope , 108 AC adapter , 36 AC channel coupling , 85 accessories , 22 , 26 , 27 acquire , 268 acquisition memory , 130 acquisition mode , 2 ...

  • Agilent Technologies 6000 Series - page 364

    364 6000 Series Oscilloscopes User’s Guide Index channel analog , 83 bandwidth limi t , 86 coupling , 85 invert , 86 on/off keys , 70 position , 84 probe units , 87 skew , 87 vernier , 84 vertical sensitivi ty , 84 channel pair , 270 charging indic ator , 34 , 36 choosing values , 66 cleaning , 339 clear display , 261 , 310 clock , 102 CMOS thres ...

  • Agilent Technologies 6000 Series - page 365

    6000 Series Oscilloscopes User’s Guide 365 Index file keys , 70 file name, new , 322 firmware updates , 334 firmware version information , 43 Flat top window , 226 FlexRay frame counter , 298 FlexRay serial decode , 294 FlexRay totalizer , 298 FlexRay trigger , 155 format waveform , 324 FPG , 109 frame trigger , I2C , 167 , 16 8 Frequency measure ...

  • Agilent Technologies 6000 Series - page 366

    366 6000 Series Oscilloscopes User’s Guide Index Maximum measurement , 251 maximum sample rate , 270 measure keys , 72 measurement category definitions , 357 measurement definitions , 244 measurement line , 75 measurement thresholds , 241 measurements , 96 , 315 MegaZoom III , 4 mem2M license , 109 mem8M license , 109 memory depth , 78 upgrade , ...

  • Agilent Technologies 6000 Series - page 367

    6000 Series Oscilloscopes User’s Guide 367 Index replacement parts , 34 5 reset LAN , 40 restart condition, I2C trigger , 166 return instrument for service , 339 Rise time measurement , 246 RMS measurement , 252 roll mode , 93 run controls , 71 Run/Stop key , 77 runt pulses , 245 S sample rate , 5 , 266 , 270 current rate displayed , 88 save brow ...

  • Agilent Technologies 6000 Series - page 368

    368 6000 Series Oscilloscopes User’s Guide Index trigger type , 139 CAN , 148 duration , 152 edge , 140 FlexRay , 155 glitch , 142 hex bus , 147 I2C , 164 LIN , 172 Nth edge burst , 170 pattern , 145 pulse width , 142 sequence , 175 slope , 140 SPI , 182 TV , 187 UART/RS232 , 199 USB , 204 triggers , 206 TTL threshold , 121 turn channel on , 70 T ...

Produzent Agilent Technologies Kategorie Respiratory Product

Dokumente, die wir vom Produzenten des Geräts Agilent Technologies 6000 Series erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Agilent Technologies
- Bedienungsanleitungen 6000 Series
- Produktkarten Agilent Technologies
- Informationsbroschüren
- oder Energieetiketten Agilent Technologies 6000 Series
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Agilent Technologies 6000 Series.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Agilent Technologies 6000 Series, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Agilent Technologies 6000 Series. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Agilent Technologies 6000 Series ansehen.

Die komplette Bedienungsanleitung des Geräts Agilent Technologies 6000 Series, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Agilent Technologies 6000 Series hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Agilent Technologies 6000 Series verständlich ist.

Eine gänzliche Bedienungsanleitung von Agilent Technologies sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Agilent Technologies 6000 Series bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Agilent Technologies 6000 Series befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Agilent Technologies 6000 Series, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Agilent Technologies 6000 Series - die uns die ersten Schritte während der Nutzung von Agilent Technologies 6000 Series erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Agilent Technologies 6000 Series hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Agilent Technologies 6000 Series im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Agilent Technologies 6000 Series?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Agilent Technologies 6000 Series nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Agilent Technologies 6000 Series hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)