Bedienungsanleitung Behringer BTR2000

19 Seiten 1.58 mb
Download

Zur Seite of 19

Summary
  • Behringer BTR2000 - page 1

    Users manual Version 1.0 April 2005 DEUTSCH RACKTUNER BTR2000 ...

  • Behringer BTR2000 - page 2

    2 RACKTUNER BTR2000 CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or sp ...

  • Behringer BTR2000 - page 3

    3 RACKTUNER BTR2000 DEUTSCH TABLE OF CONTENTS 1. INTRODUCTION ......................................................................................................... 4 1.1 Before you get started .................................................................................................................. 4 1.1.1 Shipment ..................... ...

  • Behringer BTR2000 - page 4

    4 RACKTUNER BTR2000 1. INTRODUCTION Thank you for the confidence you have placed in us with your purchase of the BTR2000. You have acquired an extraordinary combination of a tuner and a metronome with integrated rack lighting that also makes it perfect for on-stage use. This advanced equipment sets new standards with its extensive list of features. ...

  • Behringer BTR2000 - page 5

    5 RACKTUNER BTR2000 DEUTSCH Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our subsidiaries. Corresponding contact information is included in the original equipment packaging (Global Contact Information/European Contact Information). Should your country not be listed, please contact the distributor nea ...

  • Behringer BTR2000 - page 6

    6 RACKTUNER BTR2000 TRANSPOSE/REF [TAP] button. Tuner mode: A short tap on this button lets you use the wheel for transposition (chapter 4.3). Keeping the button pressed longer lets you calibrate the standard A pitch (chapter 4.2.1). Metronome mode: The BTR2000 can recognize and save a tempo that is entered by pressing the [TAP] button at lea ...

  • Behringer BTR2000 - page 7

    7 RACKTUNER BTR2000 DEUTSCH 2.2 Rear Fig. 2.3: Serial number and sockets on the rear of the BTR2000 SERIAL NUMBER MUTE You can connect a single footswitch (such as the BEHRINGER DUAL A/B SWITCH AB200) to the 1/4" TS MUTE connector (chapter 6) SELECT You can connect a double footswitch (such as the BEHRINGER FS112) to the 1/4" stereo SELEC ...

  • Behringer BTR2000 - page 8

    8 RACKTUNER BTR2000 + T o enable reference tones and the metronome, click to be output from the MAIN connector , INPUT 2 must be selected and there must be nothing plugged into the SOUND connector! Using the built-in microphone If you want to use the built-in microphone, you must select INPUT 2 and the MUTE button must be pressed. 4. TUNER The BTR2 ...

  • Behringer BTR2000 - page 9

    9 RACKTUNER BTR2000 DEUTSCH 4.1.2 T uning with the built-in microphone + T o be able to work with the built-in microphone, there must be no cable plugged into the INPUT2 connector in the back of the BTR2000 and the MUTE button must be depressed. 1 . Select INPUT 2 with the INPUT switch on the front of the BTR2000. The 2/MIC LED lights up. 2 . Mute ...

  • Behringer BTR2000 - page 10

    10 RACKTUNER BTR2000 Bass ( BAS ) This mode is especially well suited for a 6-string bass. (B - E - A - D - G - C) Baritone ( brt ) This setup helps you tune a guitar to a baritone tuning, in which each string is tuned 5 half-tones (a fourth) lower than a normal guitar. (B - E - A - D - F sharp - B) Banjo ( bjo ) The very widely used banjo tuning i ...

  • Behringer BTR2000 - page 11

    11 RACKTUNER BTR2000 DEUTSCH 4.3.1 Manual calibration The pitch of the standard A is set to a particular frequency using the BTR2000 control panel. 1 . Depress the TRANSPOSE/REF button for at least two seconds. The ¹ 440 LED flashes. The display shows the frequency currently set for the standard A, e.g. 440 . 2 . You can adjust the pit ...

  • Behringer BTR2000 - page 12

    12 RACKTUNER BTR2000 1 . Briefly press the TRANSPOSE/REF button. The TRANSP light flashes and the display shows the transposition currently set ( 0 , if no transposition is set). 2 . Turn the wheel to transpose up to 7 half-tones higher or lower. The display indicates the number of half-tones by which a non-transposed instrument is too high ( 1, 2 ...

  • Behringer BTR2000 - page 13

    13 RACKTUNER BTR2000 DEUTSCH 5. METRONOME The integrated metronome in the BTR2000 has a range of 30 b eats p er m inute (BPM) to 240 BPM. There are essentially 2 ways to use the metronome: s You can pre-set a tempo (e.g. 60BPM). s The BTR2000 can pick up a tempo set by you. To use the metronome, the BTR2000 must be in metronome mode: 1 . Press a ...

  • Behringer BTR2000 - page 14

    14 RACKTUNER BTR2000 Acoustic indicator The selected tempo is also output at the SOUND or MAIN connector. + If your instrument is plugged into INPUT 1, the metronome click is output only through the SOUND connector . If it is plugged into INPUT 2, and the SOUND output is no t in use, the metronome click is output together with the instrument signal ...

  • Behringer BTR2000 - page 15

    15 RACKTUNER BTR2000 DEUTSCH 7. APPLICA TION EXAMPLES The following sample configurations should give you an idea how the BTR2000 can be integrated in a more or less complex environment. If you have only one amplifier available, the setup shown in figure 7.1 is recommended. RACKTUNER BTR2000 V -TONE GMX212 INPUT 2 MAIN INPUT Fig. 7.1: BTR2000 confi ...

  • Behringer BTR2000 - page 16

    16 RACKTUNER BTR2000 8. INST ALLA TION 8.1 Rack installation The BTR2000 requires one height unit (1 HU) for installation in a 19" rack. Be certain to leave an additional 10cm free in the back for the connectors. For installation in a rack, M6 machine screws and nuts should be used. Ensure a sufficient air supply and to not place your BTR20 ...

  • Behringer BTR2000 - page 17

    17 RACKTUNER BTR2000 DEUTSCH 9. SPECIFICA TIONS AUDIO CONNECTORS INPUT 1 1/4" TS connector on the front and back Input impedance 1 M Ω , relay hard bypass INPUT 2 1/4" TS connector Input impedance 1 M Ω , buffered SOUND 1/4" TS connector Output impedance 4.5 k Ω MAIN 1/4" TS connector Output impedance 500 Ω CONNECTOR FOR ...

  • Behringer BTR2000 - page 18

    18 RACKTUNER BTR2000 SHORT INSTRUCTIONS SHORT INSTRUCTIONS ...

  • Behringer BTR2000 - page 19

    F EDE RAL C OMMUNICA TION S C OMMIS SION C OMP LI ANC E INF ORMA TION Responsible par t y name: MUSIC G roup S er vices USA , Inc . Address: 1 891 2 No rt h Creek Park way, Suite 2 00 Bot hel l, WA 980 1 1 , USA Phone/ Fax No.: Phone: + 1 425 67 2 081 6 Fax: + 1 425 6 73 7 647 RACK TUNER B TR200 0 complie s with t he FCC rules as m ention ed in the ...

Produzent Behringer Kategorie TV Receiver

Dokumente, die wir vom Produzenten des Geräts Behringer BTR2000 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Behringer
- Bedienungsanleitungen BTR2000
- Produktkarten Behringer
- Informationsbroschüren
- oder Energieetiketten Behringer BTR2000
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Behringer BTR2000.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Behringer BTR2000, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Behringer BTR2000. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Behringer BTR2000 ansehen.

Die komplette Bedienungsanleitung des Geräts Behringer BTR2000, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Behringer BTR2000 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Behringer BTR2000 verständlich ist.

Eine gänzliche Bedienungsanleitung von Behringer sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Behringer BTR2000 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Behringer BTR2000 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Behringer BTR2000, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Behringer BTR2000 - die uns die ersten Schritte während der Nutzung von Behringer BTR2000 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Behringer BTR2000 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Behringer BTR2000 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Behringer BTR2000?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Behringer BTR2000 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Behringer BTR2000 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)