Bedienungsanleitung Cisco Systems OL-31386-01

42 Seiten 1.29 mb
Download

Zur Seite of 42

Summary
  • Cisco Systems OL-31386-01 - page 1

    G ETTING S TARTED G UIDE Cisco Aironet 2700 Series Access Points 1 About this Guide 2 Introduction to the Access Point 3 Safety Instructi ons 4 Unpacking 5 Configuratio ns 6 Access Point Ports and Connectors 7 Configuring the Access Point 8 Mounting the Access Point 9 Deploying the Access Poin t on the Wireless Network 10 Troubleshooting 11 Declara ...

  • Cisco Systems OL-31386-01 - page 2

    2 OL-31386-01 Last Updated: March 31, 2015 ...

  • Cisco Systems OL-31386-01 - page 3

    3 1 About this Guide This Guide provides in structions on how to inst all and configure your Cisco Aironet 2700 Series Access Point. This guide also provides mounting in structions and limited troubleshooting procedures. The 2700 Series Access Point is referred to as the access point in this document. 2 Introduction to the Access Point The 2700 ser ...

  • Cisco Systems OL-31386-01 - page 4

    4 – Management Frame Protection (MFP) – Throughput, forwarding, and filtering performan ce scaled to meet 3 spatial stream, 1.3-Gbps data-rates • 64 MB flas h size • 802.11af/at – CDP (Cisco Discovery Protocol) • 2.4 GHz and 5 GHz 802.11n radios with the following features: – 4TX x 4RX for 5 GHz and 3Tx x 4Rx for 2.4 GHz – 3-spatial ...

  • Cisco Systems OL-31386-01 - page 5

    5 War n in g Installation of the equipme nt must comply with local and national electric al codes. Statement 1074 War n in g This product relies on the building’ s installation for short-circ uit (overcurrent) protection. Ensure tha t the protective device is rated not greater than: 20A. Statement 1005 War n in g Do not operate your wirel ess net ...

  • Cisco Systems OL-31386-01 - page 6

    6 4 Unpacking T o unpack the access point , follow these steps: Step 1 Unpack and remove the acce ss point and the accessory kit from the shipping box. Step 2 Return any pa cking material to the shippi n g container and save it for future use. Step 3 V erify that you have received the items listed be low . If any item is missing or damaged, contact ...

  • Cisco Systems OL-31386-01 - page 7

    7 • AIR-ANT2524DW -R • AIR-ANT2524DG-R • AIR-ANT2524V4C-R • AIR-ANT2544V4M-R • AIR-ANT2566P4W -R Internal Antennas The 2702I model access point is configured with four dual-band inverted-F antennas, and two 2.4-GHz/5-GHz dual-band radios. There are four antennas d eployed inside the access point with one deployed on each corner of the 270 ...

  • Cisco Systems OL-31386-01 - page 8

    8 6 Access Point Ports and Connectors The 2702E model access point has external antenna co nnectors and the LED indictor on th e top of the model, as shown in Figure 1 . The 2702I model a ccess point has inte grated antennas a nd does not have external connectors on the top of the unit; however , it does have the LED indicator on top of t he unit, ...

  • Cisco Systems OL-31386-01 - page 9

    9 Figur e 2 Access P oint LED Indi cator (t op)— 2702I Model The ports and connections on the bottom of the access point are shown in Figure 3 . 1 Dual-band antenna connector A 3 Dual-band antenna connecto r C 2 Dual-band antenna connector B 4 Dual-band antenna co nnector D 1 LED indicator 1 352656 ...

  • Cisco Systems OL-31386-01 - page 10

    10 Figur e 3 Access P oint P or ts and Connection s (bot t om)-AIR2702E and 2702I Models 1 Kensington lock slot 4 Auxiliary Ethernet Port 2 DC Power connection port 5 RS232 Console Port 3 Primary Ethernet port 6 Mounting bracket pins (feet for desk or table-top mount) 352657 1 3 4 5 6 2 6 ...

  • Cisco Systems OL-31386-01 - page 11

    11 Note The Auxiliary Ethernet port is disabled. Do not connect this port to a PoE switch. Connecting the primary and auxiliary ports to a PoE sw itch will not provide additional power . 7 Configuring the Access Point This section describes how to connect the access point to a wireless LAN controller . Because the configuration process takes plac e ...

  • Cisco Systems OL-31386-01 - page 12

    12 Note Y ou cannot edit or query any ac ce ss point using the controller CLI i f the name of the access point contains a space. Note Make sure that the controller is set to the curren t time. If the controller is set to a time that has already occurred, the access point might not join the controller because its certificate may not be valid for tha ...

  • Cisco Systems OL-31386-01 - page 13

    13 • Access point mounting options: below a suspended ceiling, on a fla t horizontal surface, or on a desktop. Note Y ou can mount the access point above a su spended ceiling but you must purcha se additional mounting ha rdware: See “Mounting th e Access Po int” sec tion on pag e 16 for additional information. • Access point power options: ...

  • Cisco Systems OL-31386-01 - page 14

    14 Pre-Installation Configuration Setup The pre-installation configuration setup is shown in Figure 4 . Figure 4 Pr e-Installation Configuration Setup T o perform pre-installati on configuration, perform the following steps: Step 1 Make sure that the Cisco wireless LAN controller DS port is connected to the network. Use the CLI, web-browser interfa ...

  • Cisco Systems OL-31386-01 - page 15

    15 e. CAPW AP UDP ports must not be blocked in the network. f. The access point must be able to find the IP address of the controller . This can be accomplished using DHCP , DNS, or IP subnet broadcast. This guide describes the DHCP method to convey the controller IP addres s. For other methods, refer to the product documentation. See also the “U ...

  • Cisco Systems OL-31386-01 - page 16

    16 Step 5 If your access point does not indicate norma l operation, turn it off and repeat the pre-installation configuration. Note When you are installing a La yer 3 access point on a different subnet than the Cisco wireless LAN controller, be sure that a DHCP server is reachabl e from the subnet on which you will be installing the access point, a ...

  • Cisco Systems OL-31386-01 - page 17

    17 c. If the LED blinks sequentially for more than 5 minutes, the access point is unable to find its primary , secondary , and tertiary Cisco wir eless LAN controller. Check the connection between the access point and the Cisco wireless LAN controller, and be sure the access point and the Cisco wireless LAN controller are either on the same subnet ...

  • Cisco Systems OL-31386-01 - page 18

    18 Using DHCP Option 43 Y ou can use DHCP Option 43 to provide a list of c ontroller IP addresses to the access points, enabling them to find and jo in a controller . F o r additional information, refer to the “Configuring DHCP Option 43 and DHCP Option 60” section on pag e 39 . Checking the Access Point LED The location of the access point sta ...

  • Cisco Systems OL-31386-01 - page 19

    19 Operatin g status Blinking blue Software upgrade in progr ess Cycling through green, red, and off Discovery/join process in progress Rapidly cycling through blue, green, and red Access point locati on co mmand invoked Blinking red Ethernet link not operationa l Boot loader warnings Blinking blue Conf iguration recovery in progress (MODE button p ...

  • Cisco Systems OL-31386-01 - page 20

    20 Troubleshooting the Ac cess Point Join Process Note The controller must be running Cisco IOS Software Release 7.6.12 0.x or later to support 2700 series access points. A detailed explanation of th e join process is on Cisco.com at the following URL: http://www.cisco.com/c/en/us/support/docs/wireless/4 400-series-wireless-lan-controllers/99948-la ...

  • Cisco Systems OL-31386-01 - page 21

    21 • An existing access point run ning software release 7.6.120.x or late r has been reset after clearing the configuration. If any of these conditions are met and the access point has n ot yet joined a controller , y ou can also configure a DHCP server to return a sys log server IP address to the access point using opti on 7 on the server . The ...

  • Cisco Systems OL-31386-01 - page 22

    22 11 Declarations of Conformity and Regulatory Information This section provides declarations of conformity and regulatory information for the Cisco Aironet 2700 Series Access Points. Y ou can find additional information at this URL: www.cisco.com/go/aironet/compliance Manufacturers Federal Communicati on Commission Declaration of Conformity State ...

  • Cisco Systems OL-31386-01 - page 23

    23 This device operates in the 5150-5250MHz and 54 70-5725MH z bands and is therefore restricted to indoor operation only per FCC guidance. This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limit s are designed to provide reaso nable protection against harmful ...

  • Cisco Systems OL-31386-01 - page 24

    24 VCCI Statement for Japan War n in g This is a Class B product based on the standard of the V oluntary Control Council for Interf erence from Informatio n T echnology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the inst ...

  • Cisco Systems OL-31386-01 - page 25

    25 Guidelines for Operating Cisco Aironet Access Points in Japan This section provides guidelines for avoiding interf erence when operating Cisc o Aironet access points in Japan. These guidelines are p rovided in both Japanese and English. Japanese Translation English Translation This equipment operates in the same frequency band width as industria ...

  • Cisco Systems OL-31386-01 - page 26

    26 Statement 371—Power Cable and AC Adapter English Translation When installing th e product, please use the provided or designated connection cables/power cables/AC adaptors. Using any other cables/adaptors could cause a malfunction or a fire. Electrical Appliance and Material Safety Law prohibits the use of UL-certified cables (that have the ? ...

  • Cisco Systems OL-31386-01 - page 27

    27 This device complies with Class B Limits of Industry Canada. Operatio n is subject to the follo wing two conditions: 1. This device may not cause harmful interferenc e, and 2. This device must accept any interference received, incl uding interference that may cause undesired operation. Cisco Aironet Access Points are cert ified to the requiremen ...

  • Cisco Systems OL-31386-01 - page 28

    28 Afin de réduire le risque d'interférence aux au tres utilisateurs, le typ e d'antenne et son gain doivent être choisis de façon à ce que la puissance isotrope r ayonnée équivalente (p.i .r .e.) ne soit pas supérieure au niveau requis pour obtenir une communication satisfaisante. La bande 5 150-5 250 MHz est réservés uniquemen ...

  • Cisco Systems OL-31386-01 - page 29

    29 Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC & Medical Directive 93/42/EEC ...

  • Cisco Systems OL-31386-01 - page 30

    30 The following standards were applied: EMC—EN 301.489-1 v1.8.1; EN 301.489-17 v2.1.1 Health & Safety—EN60950-1: 2005; EN 50385: 2002 Radio—EN 300 328 v 1.7.1; EN 301.893 v 1.5.1 The conformity assessment procedure ref erred to in Article 10.4 and Annex III of Directive 1999/5/EC has been followed. ...

  • Cisco Systems OL-31386-01 - page 31

    31 This device also conforms to the EMC requirem ents of the Medical Devices Directi ve 93/42/EEC. Note This equipment is intended to be used in a ll EU and EFT A countries. Outdoor u se may be restricted to certain frequencie s and/or may require a license fo r operation. For more details, contact Cisco Corporate Compliance. The product carries th ...

  • Cisco Systems OL-31386-01 - page 32

    32 As such the systems are desi gned to be operated as to avoid contact with the antennas by the end user . It is recommended to set the system in a location where the antennas can remain at least a minimum distance as specified from the user in accordance to the regulatory guidelines which are designed to reduce the overall exposure of th e user o ...

  • Cisco Systems OL-31386-01 - page 33

    33 This Device Meets the In dustry Canada Guidelines for Exposure to Radio Waves The 2700 series device includes a radio transmi tter an d receiver . It is designed not to exceed the limits for exposure to radio waves (radio frequency electrom agnetic fields) as referenced in Heal th Canada Safety Code 6. The guidelines include a substantial safe t ...

  • Cisco Systems OL-31386-01 - page 34

    Santé Canada affirme que la littérature scientifiq ue actuelle n'indique pas qu'il faille prendre des précautions particulières lors de l'utilisation d'un appareil sans fil. Si vous voulez réduire votre exposition encore davantage, selon l'agence, vous pouv ez facil ement le faire en réorientant les antennes afin qu&a ...

  • Cisco Systems OL-31386-01 - page 35

    35 Administrative Rules for Cisco Ai ronet Access Points in Taiwan This section provides administrative rules for oper ating Cisco Aironet access points in T aiwan. The rules for all access points are provided in both Chinese and English. Chinese Translation ...

  • Cisco Systems OL-31386-01 - page 36

    36 English Translation Administrative Rules for Low- power Radio-Frequency Devices Article 12 For those low-power radio-frequenc y devices that have alr eady recei ved a type-a pproval , compani es, business units or users should not change its freque ncies, increase its power or change its original features and functions. Article 14 The operation ...

  • Cisco Systems OL-31386-01 - page 37

    37 English Translation Low-power Radio-frequency Devices T echnical Specifica tions Operation of Cisco Aironet Access Points in Brazil This section contains special information for oper ation of Cisco Aironet access points in Brazil. Access Point Models: AIR-CAP2702E-Z-K9 AIR-CAP2702I-Z-K9 AIR-AP2702I-UXK9 AIR-AP2702E-UXK9 Regulatory Information Fi ...

  • Cisco Systems OL-31386-01 - page 38

    38 Figur e 5 Br azil Regulat ory Inf or mation Portuguese Translation Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e nã o po de causar interferência a sistemas operando em caráter primário. English Translation This equipment operates ...

  • Cisco Systems OL-31386-01 - page 39

    12 Configuring DHCP Option 43 and DHCP Option 60 This section contains a DHCP Option 43 configu ration example on a Windows 2003 Enterprise DHCP server for use with Cisco Aironet lightweig ht acce ss points. For other DHCP server implementations, consult product documentation for configuring DHCP Option 43. In Option 43, you should use the IP addre ...

  • Cisco Systems OL-31386-01 - page 40

    Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliate s in the U.S. and other countries. T o view a list of Cisco trademarks, go to this URL: www.cisco .com/go/trademarks . Third-party trad emarks mentio ned are the p roperty of t heir respec tive owners. The use of th e word partn er does not i mply a partn ...

  • Cisco Systems OL-31386-01 - page 41

    41 ...

  • Cisco Systems OL-31386-01 - page 42

    42 ...

Produzent Cisco Systems Kategorie Mobility Aid

Dokumente, die wir vom Produzenten des Geräts Cisco Systems OL-31386-01 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Cisco Systems
- Bedienungsanleitungen OL-31386-01
- Produktkarten Cisco Systems
- Informationsbroschüren
- oder Energieetiketten Cisco Systems OL-31386-01
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Cisco Systems OL-31386-01.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Cisco Systems OL-31386-01, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Cisco Systems OL-31386-01. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Cisco Systems OL-31386-01 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Cisco Systems OL-31386-01, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Cisco Systems OL-31386-01 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Cisco Systems OL-31386-01 verständlich ist.

Eine gänzliche Bedienungsanleitung von Cisco Systems sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Cisco Systems OL-31386-01 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Cisco Systems OL-31386-01 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Cisco Systems OL-31386-01, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Cisco Systems OL-31386-01 - die uns die ersten Schritte während der Nutzung von Cisco Systems OL-31386-01 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Cisco Systems OL-31386-01 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Cisco Systems OL-31386-01 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Cisco Systems OL-31386-01?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Cisco Systems OL-31386-01 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Cisco Systems OL-31386-01 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)