Bedienungsanleitung MSi 865GM3

70 Seiten 3.65 mb
Download

Zur Seite of 70

Summary
  • MSi 865GM3 - page 1

    i V ersion 1.0 G52-M6763X1-G22 MS-6763 (v1.X) M-A TX Mainboard 865GM3/865PEM2 Series ...

  • MSi 865GM3 - page 2

    ii Manual Rev: 1.0 Release Date: July 2003 FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equip- ment is operated in a c ...

  • MSi 865GM3 - page 3

    iii Copyright Notice The material in this document is the intellectual property of MICRO-ST AR INTERNA TIONAL . W e take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice. T rademarks Al ...

  • MSi 865GM3 - page 4

    iv 1 . Always read the safety instructions carefully. 2 . Keep this User ’ s Manual for future reference. 3 . Keep this equipment away from humidity. 4 . Lay this equipment on a reliable flat surface before setting it up. 5 . The openings on the enclosure are for air convection hence protects the equipment from overheating. DO NOT COVER THE OPENI ...

  • MSi 865GM3 - page 5

    v CONTENTS FCC-B Radio Frequency Interference Statement .......................................... i i i Copyright Notice .......................................................................................... i i i Revision History ........................................................................................... i i i T echnical Suppo ...

  • MSi 865GM3 - page 6

    vi USB Connectors .......................................................................... 2-14 Audio Port Connectors ............................................................... 2-15 Connectors ......................................................................................... 2-16 Floppy Disk Drive Connector: FDD1 ..................... ...

  • MSi 865GM3 - page 7

    vii Integrated Peripherals ........................................................................ 3-15 Power Management Setup ................................................................. 3-21 PNP/PCI Configurations ..................................................................... 3-25 PC Health Status ........................ ........... ...

  • MSi 865GM3 - page 8

    1-1 Getting Started Chapter 1. Getting Started Thank you for choosing the 865GM3/865PEM2 Series (MS-6763 v1.X) micro A TX mainboard. The 865GM3/865PEM2 Series are based on Intel ® Springdale-G/PE & ICH5 chipsets for optimal system efficiency. Designed to fit the advanced Intel ® Pentium ® 4 processors in 478 pin package, the 865GM3/865PEM2 S ...

  • MSi 865GM3 - page 9

    1-2 MS-6763 M-ATX Mainboard Mainboard Specifications CPU h Supports Intel ® P4 Northwood (Socket 478) processors. h FSB 533~800MHz, depending on the CPU installed. h Supports up to 3.2GHz. Chipset h Intel ® Springdale-PE/G chipset - Supports FSB 800/533/400MHz. - Supports AGP 8X/4X interface. - Supports DDR 400/333/266 memory interface. - Integra ...

  • MSi 865GM3 - page 10

    1-3 Getting Started On-Board Peripherals h On-Board Peripherals include: - 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes - 2 serial ports (COM A & JCOM1) - 1 parallel port supports SPP/EPP/ECP mode - 1 VGA port (for 865GM3 Series only) - 8 USB 2.0 ports (Rear * 4/ Front * 4) - 1 Line-In/Line-Out/Mic-In port - 1 RJ45 ...

  • MSi 865GM3 - page 11

    1-4 MS-6763 M-ATX Mainboard Mainboard Layout 865PEM2 Series (MS-6763 v1.X) Micro A TX Mainboard D I M M 1 D I M M 3 D I M M 2 D I M M 4 AGP Slot T: M o u s e B: Keyboar d T: Line-O ut B: Mic Line- In M: JSP1 CNR JCD1 JMD1 JAUX1 Codec RealT ek RTL8101L NEC D72874GC BA T T + BIOS W i n b o n d 8 3 6 2 7 H F - A W ICH5 Int el 865PE I D E 1 I D E 2 F D ...

  • MSi 865GM3 - page 12

    1-5 Getting Started D I M M 1 D I M M 3 D I M M 2 D I M M 4 AGP Slot T: M o u s e B: Keyboar d T: Line-O ut B: Mic Line- In M: JSP1 CNR JCD1 JMD1 JAUX1 Codec Intel 8254 7EI BA T T + BIOS W i n b o n d 8 3 6 2 7 H F - A W ICH5 Int el 865G I D E 1 I D E 2 F D D 1 PCI Slo t 1 PCI Slo t 2 PCI Slo t 3 CPU_FAN JCOM1 SYS_F AN JFP1 JPW1 A T X 1 JBA T 1 JCI ...

  • MSi 865GM3 - page 13

    2-1 Hardware Setup Chapter 2. Hardware Setup Hardware Setup This chapter provides you with the information about hard- ware setup procedures. While doing the installation, be careful in holding the components and follow the installation procedures. For some components, if you install in the wrong orientation, the components will not work properly. ...

  • MSi 865GM3 - page 14

    2-2 MS-6763 M-ATX Mainboard Quick Components Guide JBAT1 , p.2-25 DDR DIMMs , p.2-7 CPU_FAN , p.2-19 FDD1 , p.2-16 JCI1 , p.2-16 JUSB1/2 , p.2-23 JAUD1 , p.2-22 Back Panel I/O , p.2-10 JPW1 , p.2-9 SYS_FAN , p.2-19 JCD1 , p.2-20 IDE2/1 , p.2-17 CPU , p.2-3 ATX1 , p.2-9 JFP1 , p.2-21 AGP1 , p.2-26 PCI 1~3 , p.2-26 JAUX1 , p.2-20 JCOM1 , p.2-11 JSP1 ...

  • MSi 865GM3 - page 15

    2-3 Hardware Setup Central Processing Unit: CPU CPU Core Speed Derivation Procedure If CPU Clock = 100MHz Core/Bus ratio = 24 then CPU core speed = Host Clock x Core/Bus ratio = 100MHz x 24 = 2.4 GHz MSI Reminds You... Overheating Overheating will seriously damage the CPU and system, al- ways make sure the cooling fan can work properly to protect t ...

  • MSi 865GM3 - page 16

    2-4 MS-6763 M-ATX Mainboard 1. Please turn off the power and unplug the power cord before installing the CPU. 2. Pull the lever sideways away from the socket. Make sure to raise the lever up to a 90-de- gree angle. 3. Look for the gold arrow. The gold arrow should point to- wards the lever pivot. The CPU can only fit in the cor- rect orientation. 4 ...

  • MSi 865GM3 - page 17

    2-5 Hardware Setup Installing the CPU Fan As processor technology pushes to faster speeds and higher performance, thermal management becomes increasingly important. To dissipate heat, you need to attach the CPU cooling fan and heatsink on top of the CPU. Follow the instructions below to install the Heatsink/Fan: 2. Position the heatsink onto the re ...

  • MSi 865GM3 - page 18

    2-6 MS-6763 M-ATX Mainboard 5. Connect the fan power cable from the mounted fan to the 3-pin fan power connector on the board. fan power cable NOTES ...

  • MSi 865GM3 - page 19

    2-7 Hardware Setup The mainboard provides four 184-pin unbuffered PC3200/PC2700/ PC2100 DDR DIMMs and supports the memory size up to 4GB. To operate properly, at least two DIMM modules must be installed onboard. Memory DDR DIMM Slots (DIMM 1~4) DDR Population Rules Install at least one DIMM module on the slots. Each DIMM slot supports up to a maxim ...

  • MSi 865GM3 - page 20

    2-8 MS-6763 M-ATX Mainboard Installing DDR Modules 1. The DDR DIMM has only one notch on the center of module. The mod- ule will only fit in the right orientation. 2. Insert the DIMM memory module vertically into the DIMM slot. Then push it in until the golden finger on the memory module is deeply in- serted in the socket. 3. The plastic clip at ea ...

  • MSi 865GM3 - page 21

    2-9 Hardware Setup PIN SIGNAL 1 GND 2 GND 3 12V 4 12V JPW1 Pin Definition Power Supply The mainboard supports ATX power supply for the power system. Be- fore inserting the power supply connector, always make sure that all compo- nents are installed properly to ensure that no damage will be caused. ATX 20-Pin Power Connector: ATX1 This connector all ...

  • MSi 865GM3 - page 22

    2-10 MS-6763 M-ATX Mainboard The back panel provides the following connectors: Back Panel Mouse/Keyboard Connector The mainboard provides a standard PS/2 ® mouse/keyboard mini DIN connector for attaching a PS/2 ® mouse/keyboard. You can plug a PS/2 ® mouse/ keyboard directly into this connector. The connector location and pin assign- ments are a ...

  • MSi 865GM3 - page 23

    2-11 Hardware Setup Serial Port Connectors: COMA & JCOM1 The mainboard offers two 9-pin serial ports COMA and JCOM1. All ports are 16550A high speed communication ports that send/receive 16 bytes FIFOs. You can attach a serial mouse or other serial device directly to them. COMA 1 2 3 4 5 6 7 8 9 VGA Connector (for 865GM3 Series only) The mainbo ...

  • MSi 865GM3 - page 24

    2-12 MS-6763 M-ATX Mainboard Parallel Port Connector: LPT1 The mainboard provides a 25-pin female centronic connector as LPT. A parallel port is a standard printer port that supports Enhanced Parallel Port (EPP) and Extended Capabilities Parallel Port (ECP) mode. 13 1 14 25 PIN SIGNAL DESCRIPTION 1 STROBE Strobe 2 DATA0 Data0 3 DATA1 Data1 4 DATA2 ...

  • MSi 865GM3 - page 25

    2-13 Hardware Setup LAN Jack: 10/100Mbps LAN (for 865PEM2 Series) or Giga- bit LAN (for 865GM3 Series) The mainboard provides one standard RJ-45 jack for connection to Lo- cal Area Network (LAN). Two LAN chipsets are available upon request: 1. 10/100Mbps LAN for 865PEM2-IL mainboard. 2. Gigabit LAN for 865GM3-F mainboard. Gigabit LAN enables data t ...

  • MSi 865GM3 - page 26

    2-14 MS-6763 M-ATX Mainboard USB Connectors The mainboard provides a UHCI (Universal Host Controller Interface) Universal Serial Bus root for attaching USB devices such as keyboard, mouse or other USB-compatible devices. You can plug the USB device directly into the connector. USB Ports 1 2 3 4 5 6 7 8 PIN SIGNAL DESCRIPTION 1 VCC +5V 2 -Data 0 Neg ...

  • MSi 865GM3 - page 27

    2-15 Hardware Setup Audio Port Connectors Line Out is a connector for Speakers or Headphones. Line In is used for external CD player, Tape player, or other audio devices. Mic is a connec- tor for microphones. 1/8” Stereo Audio Connectors Mic In Line Out Line In ...

  • MSi 865GM3 - page 28

    2-16 MS-6763 M-ATX Mainboard The mainboard provides connectors to connect to FDD, IDE HDD, case, audio, LAN, USB Ports, and CPU/System fans. Floppy Disk Drive Connector: FDD1 The mainboard provides a standard floppy disk drive connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. Connectors FDD1 Chassis Intrusion Switch Conne ...

  • MSi 865GM3 - page 29

    2-17 Hardware Setup MSI Reminds You... If you install two hard disks on cable, you must configure the second drive to Slave mode by setting its jumper. Refer to the hard disk documentation supplied by hard disk vendors for jumper setting instructions. Ultra ATA HDD Connectors: IDE1, IDE2 The mainboard has a 32-bit Enhanced PCI IDE and Ultra DMA 33/ ...

  • MSi 865GM3 - page 30

    2-18 MS-6763 M-ATX Mainboard Serial ATA HDD Connectors: SATA1, SATA2 The mainboard provides dual high-speed Serial ATA interface ports. The ports support 1 st generation Serial ATA data rates of 150MB/s and are fully compliant with Serial ATA 1.0 specifications. Each Serial ATA connec- tor can connect to 1 hard disk drive. PIN SIGNAL PIN SIGNAL 1 G ...

  • MSi 865GM3 - page 31

    2-19 Hardware Setup MSI Reminds You... Always consult the vendors for proper CPU cooling fan. CPU_FAN Sensor +12V GND Fan Power Connectors: CPU_FAN/SYS_FAN The CPU_FAN (processor fan) and SYS_FAN (system fan) support sys- tem cooling fan with +12V. It supports three-pin head connector. When con- necting the wire to the connectors, always take note ...

  • MSi 865GM3 - page 32

    2-20 MS-6763 M-ATX Mainboard Connected to JSP1 SPDIF Bracket (Optional) CD-In Connector: JCD1 The connector is for CD-ROM audio connector. Modem-In Connector: JMD1 (Optional) The connector is for modem with internal audio connector. Aux Line-In Connector: JAUX1 (Optional) The connector is for DVD add-on card with Line-in connector. SPDIF-Out Connec ...

  • MSi 865GM3 - page 33

    2-21 Hardware Setup PIN SIGNAL DESCRIPTION 1 HD_LED_P Hard disk LED pull-up 2 FP PWR/SLP MSG LED pull-up 3 HD_LED_N Hard disk active LED 4 FP PWR/SLP MSG LED pull-up 5 RST_SW_N Reset Switch low reference pull-down to GND 6 PWR_SW_P Power Switch high reference pull-up 7 RST_SW_P Reset Switch high reference pull-up 8 PWR_SW_N Power Switch low referen ...

  • MSi 865GM3 - page 34

    2-22 MS-6763 M-ATX Mainboard Front Panel Audio Connector: JAUD1 The JAUD1 front panel audio connector allows you to connect to the front panel audio and is compliant with Intel ® Front Panel I/O Connectivity Design Guide. MSI Reminds You... If you don’t want to connect to the front audio header, pins 5 & 6, 9 & 10 have to be jumpered in ...

  • MSi 865GM3 - page 35

    2-23 Hardware Setup Front USB Connectors: JUSB1, JUSB2 The mainboard provides two USB 2.0 pin headers JUSB1/2 that are compliant with Intel ® I/O Connectivity Design Guide. USB 2.0 technology increases data transfer rate up to a maximum throughput of 480Mbps, which is 40 times faster than USB 1.1, and is ideal for connecting high-speed USB interfa ...

  • MSi 865GM3 - page 36

    2-24 MS-6763 M-ATX Mainboard IEEE 1394 Connector: J1394_1 (Optional for 865PEM2 Series) The mainboard provides one 1394 pin header that allows you to connect IEEE 1394 ports via an external IEEE1394 bracket (optional). Pin Definition PIN SIGNAL PIN SIGNAL 1 TPA+ 2 TPA- 3 Ground 4 Ground 5 TPB+ 6 TPB- 7 Cable power 8 Cable power 9 Key (no pin) 10 Gr ...

  • MSi 865GM3 - page 37

    2-25 Hardware Setup The motherboard provides the following jumpers for you to set the computer’s function. This section will explain how to change your motherboard’s function through the use of jumpers. Clear CMOS Jumper: JBAT1 There is a CMOS RAM on board that has a power supply from external battery to keep the data of system configuration. W ...

  • MSi 865GM3 - page 38

    2-26 MS-6763 M-ATX Mainboard Slots PCI Slots AGP (Accelerated Graphics Port) Slot The AGP slot allows you to insert the AGP graphics card. AGP is an interface specification designed for the throughput demands of 3D graphics. It introduces a 66MHz, 32-bit channel for the graphics controller to directly access main memory. The slot supports 8x/4x car ...

  • MSi 865GM3 - page 39

    2-27 Hardware Setup PCI Interrupt Request Routing The IRQ, acronym of interrupt request line and pronounced I-R-Q, are hardware lines over which devices can send interrupt signals to the microprocessor. The PCI IRQ pins are typically connected to the PCI bus INT A# ~ INT D# pins as follows: Order 1 Order 2 Order 3 Order 4 PCI Slot 1 INT A# INT B# I ...

  • MSi 865GM3 - page 40

    3-1 BIOS Setup Chapter 3. BIOS Setup This chapter provides information on the BIOS Setup pro- gram and allows you to configure the system for optimum use. You may need to run the Setup program when:  An error message appears on the screen during the system booting up, and requests you to run SETUP.  You want to change the default settings for ...

  • MSi 865GM3 - page 41

    3-2 MS-6763 M-ATX Mainboard Entering Setup Control Keys Power on the computer and the system will start POST (Power On Self Test) process. When the message below appears on the screen, press <DEL> key to enter Setup. Press DEL to enter SETUP If the message disappears before you respond and you still wish to enter Setup, restart the system by ...

  • MSi 865GM3 - page 42

    3-3 BIOS Setup Getting Help After entering the Setup menu, the first menu you will see is the Main Menu. Main Menu The main menu lists the setup functions you can make changes to. You can use the arrow keys ( ↑↓ ) to select the item. The on-line description of the highlighted setup function is displayed at the bottom of the screen. Sub-Menu If ...

  • MSi 865GM3 - page 43

    3-4 MS-6763 M-ATX Mainboard The Main Menu Standard CMOS Features Use this menu for basic system configurations, such as time, date etc. Advanced BIOS Features Use this menu to configure the special enhanced features. Advanced Chipset Features Use this menu to change the values in the chipset registers and optimize your system’s performance. Integ ...

  • MSi 865GM3 - page 44

    3-5 BIOS Setup PNP/PCI Configurations This entry appears if your system supports PnP/PCI. PC Health Status This menu shows the status of your CPU, fan, overall system status, etc. Moni- tor function is available only if there is hardware monitoring mechanism onboard. Frequency/Voltage Control Use this menu to specify your settings for frequency/vol ...

  • MSi 865GM3 - page 45

    3-6 MS-6763 M-ATX Mainboard Standard CMOS Features The items inside Standard CMOS Features menu are divided into 10 categories. Each category includes none, one or more setup items. Use the arrow keys to highlight the item you want to modify and use the <PgUp> or <PgDn> keys to switch to the value you prefer. Date (mm:dd:yy) This allows ...

  • MSi 865GM3 - page 46

    3-7 BIOS Setup will not work properly if you enter improper information for this category. If your hard disk drive type is not matched or listed, you can use Manual to define your own drive type manually. If you select Manual , related information is asked to be entered to the follow- ing items. Enter the information directly from the keyboard. Thi ...

  • MSi 865GM3 - page 47

    3-8 MS-6763 M-ATX Mainboard Advanced BIOS Features Hard Disk Boot Priority This setting determines the boot priority of the installed hard disk drives. Virus Warning The item is to set the Virus Warning feature for IDE Hard Disk boot sector protection. If the function is enabled and any attempt to write data into this area is made, BIOS will displa ...

  • MSi 865GM3 - page 48

    3-9 BIOS Setup crease number of users a platform can support, improve reaction and response time, and increase number of transaction that can be executed. Setting options: Enabled , Disabled . Quick Boot The setting allows the system to skip certain tests while booting. This will decrease the time needed to boot the system. Setting options: Enabled ...

  • MSi 865GM3 - page 49

    3-10 MS-6763 M-ATX Mainboard USB-HDD The system will boot from the HDD at USB ports. LAN The system will boot from the Network drive. Disabled Disable this sequence. Boot Other Device Setting the option to Enabled allows the system to try to boot from other devices if the system fails to boot from the 1st/2nd/3rd boot device. Swap Floppy Drive Sett ...

  • MSi 865GM3 - page 50

    3-11 BIOS Setup Security Option This specifies the type of BIOS password protection that is implemented. Set- tings are described below: APIC Mode This field is used to enable or disable the APIC (Advanced Programmable Interrupt Controller). Due to compliance with PC2001 design guide, the sys- tem is able to run in APIC mode. Enabling APIC mode wil ...

  • MSi 865GM3 - page 51

    3-12 MS-6763 M-ATX Mainboard Advanced Chipset Features MSI Reminds You... Change these settings only if you are familiar with the chipset. DRAM Timing Selectable Selects whether DRAM timing is controlled by the SPD (Serial Presence Detect) EEPROM on the DRAM module. Setting to By SPD enables DRAM timings to be determined by BIOS based on the config ...

  • MSi 865GM3 - page 52

    3-13 BIOS Setup the CAS and RAS strobe signals, used when DRAM is written to, read from or refreshed. Fast speed offers faster performance while slow speed offers more stable performance. Settings: 4, 3 , 2 (clocks). DRAM RAS# Precharge This item controls the number of cycles for Row Address Strobe (RAS) to be allowed to precharge. If insufficient ...

  • MSi 865GM3 - page 53

    3-14 MS-6763 M-ATX Mainboard AGP Aperture Size (MB) This setting controls just how much system RAM can be allocated to AGP for video purposes. The aperture is a portion of the PCI memory address range dedicated to graphics memory address space. Host cycles that hit the aperture range are forwarded to the AGP without any translation. The option allo ...

  • MSi 865GM3 - page 54

    3-15 BIOS Setup OnChip IDE Device Press <Enter> to enter the sub-menu and the following screen appears: IDE HDD Block Mode Block mode is also called block transfer, multiple commands, or multi- ple sector read/write. If your IDE hard drive supports block mode (most new drives do), select [Enabled] for automatic detection of the optimal number ...

  • MSi 865GM3 - page 55

    3-16 MS-6763 M-ATX Mainboard IDE DMA Transfer Access This setting is used to enable or disable the DMA transfer function of IDE hard drives under certain operating systems that do not support IDE drivers, ex: DOS. Setting options: Enabled, Disabled . On-Chip Primary/Secondary PCI IDE The integrated peripheral controller contains an IDE interface wi ...

  • MSi 865GM3 - page 56

    3-17 BIOS Setup Serial ATA Port 1/2 Mode When On-Chip Serial ATA is set to Legacy Mode , setting options will show as follows: 1. Primary Master => Serial ATA Port 1/2 will be set to Primary Master. 2. Primary Slave => Serial ATA Port 1/2 will be set to Primary Slave. 3. Secondary Master => Serial ATA Port 1/2 will be set to Secondary Mast ...

  • MSi 865GM3 - page 57

    3-18 MS-6763 M-ATX Mainboard For 865PE CSA LAN (Gigabit-LAN) (for 865G) This setting is used to enable/disable the onboard Gigabit LAN controller. Setting options: Disabled , Enabled . USB Controller This setting is used to enable/disable the onboard USB 1.1 controller. Setting options: Disabled , Enabled . USB 2.0 Controller This setting is used t ...

  • MSi 865GM3 - page 58

    3-19 BIOS Setup AC97 Modem Auto allows the mainboard to detect whether a modem is used. If a mo- dem is detected, the onboard AC’97 modem controller will be enabled; if not, it is disabled. Disable the controller if you want to use other con- troller cards to connect a modem. Settings: Auto , Disabled . Onboard LAN Device (for 865PE) This setting ...

  • MSi 865GM3 - page 59

    3-20 MS-6763 M-ATX Mainboard Onboard Parallel Port There is a built-in parallel port on the on-board Super I/O chipset that provides Standard, ECP, and EPP features. It has the following options: Disabled 3BC/IRQ7 Line Printer port 0 278/IRQ5 Line Printer port 2 378/IRQ7 Line Printer port 1 Parallel Port Mode SPP : Standard Parallel Port EPP : Enha ...

  • MSi 865GM3 - page 60

    3-21 BIOS Setup Power Management Setup ACPI Suspend Type This item specifies the power saving modes for ACPI function. If your oper- ating system supports ACPI, such as Windows 98SE, Windows ME and Win- dows 2000, you can choose to enter the Standby mode in S1(POS) or S3 (STR) fashion through the setting of this field. Options are: S1 (POS) The S1 ...

  • MSi 865GM3 - page 61

    3-22 MS-6763 M-ATX Mainboard Run VGABIOS if S3 Resume Selecting [Enabled] allows BIOS to call VGABIOS to initialize the VGA card when system wakes up (resumes) from S3 sleep state. The system resume time is shortened when you disable the function, but system will need an AGP driver to initialize the VGA card. Therefore, if the AGP driver of the car ...

  • MSi 865GM3 - page 62

    3-23 BIOS Setup Suspend Mode If system activity is not detected for the length of time specified in this field, all devices except CPU will be shut off. Settings are Disabled , 1 Min , 2 Min , 4 Min , 8 Min , 12 Min , 20 Min , 30 Min , 40 Min and 1 Hour . HDD Power Down If HDD activity is not detected for the length of time specified in this field, ...

  • MSi 865GM3 - page 63

    3-24 MS-6763 M-ATX Mainboard **Reload Global Timer Events** Primary/Secondary IDE 0/1, FDC/COM/LPT Port, PCI PIRQ [A-D]# Global Timer Events are I/O events whose occurrence can prevent the system from entering a power saving mode or can awaken the system from such a mode. In effect, the system remains alert for anything which occurs to a de- vice t ...

  • MSi 865GM3 - page 64

    3-25 BIOS Setup PNP/PCI Configurations This section describes configuring the PCI bus system and PnP (Plug & Play) feature. PCI, or P eripheral C omponent I nterconnect, is a system which allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its special components. This section covers some very te ...

  • MSi 865GM3 - page 65

    3-26 MS-6763 M-ATX Mainboard all of the boot and Plug and Play compatible devices. However, this capability means absolutely nothing unless you are using a Plug and Play operating sys- tem such as Windows ® 95/98. If you set this field to “manual” choose specific resources by going into each of the sub menu that follows this field (a sub menu ...

  • MSi 865GM3 - page 66

    3-27 BIOS Setup PC Health Status This section shows the status of your CPU, fan, overall system status, etc. Monitor function is available only if there is hardware monitoring mecha- nism onboard. Chassis Intrusion Detect The field enables or disables the feature of recording the chassis intrusion status and issuing a warning message if the chassis ...

  • MSi 865GM3 - page 67

    3-28 MS-6763 M-ATX Mainboard Warning Beep This setting allows you to monitor the operation of the CPU fan. Setting to Enabled will activate the warning beep once the system detects the malfunc- tion/halt of the CPU fan. ...

  • MSi 865GM3 - page 68

    3-29 BIOS Setup Use this menu to specify your settings for frequency/voltage control. Auto Detect PCI Clk This item is used to auto detect the PCI slots. When set to Enabled , the system will remove (turn off) clocks from empty PCI slots to minimize the electro- magnetic interference (EMI). Setting options: Enabled, Disabled . Spread Spectrum When ...

  • MSi 865GM3 - page 69

    3-30 MS-6763 M-ATX Mainboard The Default Setting is the default values set by the mainboard manufac- turer specifically for optimal performance of the mainboard. When you select Load Default Setting , a message as below appears: Pressing Y loads the default factory settings for optimal system performance. Load Default Setting ...

  • MSi 865GM3 - page 70

    3-31 BIOS Setup Set Supervisor/User Password MSI Reminds You... About Supervisor Password & User Password: Supervisor password: Can enter and change the settings of the setup menu. User password: Can only enter but do not have the right to change the settings of the setup menu. When you select this function, a message as below will appear on th ...

Produzent MSi Kategorie Computer Hardware

Dokumente, die wir vom Produzenten des Geräts MSi 865GM3 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen MSi
- Bedienungsanleitungen 865GM3
- Produktkarten MSi
- Informationsbroschüren
- oder Energieetiketten MSi 865GM3
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung MSi 865GM3.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen MSi 865GM3, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen MSi 865GM3. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts MSi 865GM3 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts MSi 865GM3, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von MSi 865GM3 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von MSi 865GM3 verständlich ist.

Eine gänzliche Bedienungsanleitung von MSi sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von MSi 865GM3 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von MSi 865GM3 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich MSi 865GM3, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts MSi 865GM3 - die uns die ersten Schritte während der Nutzung von MSi 865GM3 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit MSi 865GM3 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von MSi 865GM3 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich MSi 865GM3?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit MSi 865GM3 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit MSi 865GM3 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)