Bedienungsanleitung Craftsman 315.10136

15 Seiten 0.59 mb
Download

Zur Seite of 15

Summary
  • Craftsman 315.10136 - page 1

    Operator's Manual 1/2 in. HAMMER DRILL Double Insulated Model No. 315.101360 Save this manual for future reference ,A CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product. Customer Help Line: 1-800-932-3188 • Safety • Features • Operation • Maintenance • Parts List Sears, Roebuck and C ...

  • Craftsman 315.10136 - page 2

    • Table of Contents ..................................................................................................................................................... 2 • General Safety Rules ............................................................................................................................................ 2-3 • Sp ...

  • Craftsman 315.10136 - page 3

    Tool Use and Care • Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. • Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is d ...

  • Craftsman 315.10136 - page 4

    Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. Additional Rules for Safe Operation • Know your power tool. Read operator's manual carefull ...

  • Craftsman 315.10136 - page 5

    Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternati ...

  • Craftsman 315.10136 - page 6

    KNOW YOUR HAMMER DRILL See Figure I. Before attempting to use your hammer drill, familiarize yourself with all operating features and safety requirements. See Figure 1. _i CAUTION: Carefully read through this entire operator's manual before using your new drill. Pay close attention to the Rules For Safe Operation, Warnings, and Cautions. If yo ...

  • Craftsman 315.10136 - page 7

    SWITCH See Figure 2. To turn your hammer drill ON, depress the switch trigger. Release switch trigger to turn your hammer drill OFF. LOCK-ON BUTTON See Figure 2. Your hammer drill is equipped with a "lock-on" feature, which is convenient when continuous drilling for extended periods of time is required. To lock-on, depress the switch trig ...

  • Craftsman 315.10136 - page 8

    • Form a loop by forcing end with round holes through slotted hole opposite end. • Place the loop over the cord and pull it tight. • Mount the chuck key by inserting the geared end through the hole in the holder. Large keys in the larger hole, smaller keys in the small hole. VARIABLE SPEED See Figure 5. Your hammer drill has a variable speed ...

  • Craftsman 315.10136 - page 9

    To Adjust: • To adjust, loosen the auxiliary handle assembly by turning the handle counterclockwise. • Rotate auxiliary handle assembly to desired operating position. • Securely tighten by turning the auxiliary handle clockwise. USING DEPTH GAGE ROD See Figure 7. Note: When installing depth gage rod, align teeth on depth gage rod with the tee ...

  • Craftsman 315.10136 - page 10

    TO INSTALL BITS See Figure 9. • Unplug your hammer drill. ,_ WARNING: Failure to unplug hammer drill your could result in accidental starting causing serious injury. • Open or close the chuck jaws to a point where the opening is slightly larger than the drill bit you intend to use. Also, raise the front of your drill slightly to keep the drill ...

  • Craftsman 315.10136 - page 11

    DRILLING See Figure 11. • Depress and release switch trigger to be sure your drill is in OFF position before connecting it to power supply. • Check the direction of rotation lever for correct setting (forward or reverse). See Figure 3. • Secure the material to be drilled in a vise or with clamps to keep it from turning as the drill bit rotate ...

  • Craftsman 315.10136 - page 12

    CHUCK REMOVAL See Figure 12. The chuck must be removed in order to use some accessories. To remove: • Unplug your drill. _k WARNING: Failure to unplug your drill could result in accidental starting causing serious injury. • Insert a 8 mm (5/16 in.) or larger hex key into the chuck of your drill and tighten chuck jaws securely. • Tap the hex k ...

  • Craftsman 315.10136 - page 13

    GENERAL Only the parts shown on parts list, page 17, are intended to be repaired or replaced by the customer. All other parts represent an important part of the double insulation system and should be serviced only at a Sears Service Center. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types ...

  • Craftsman 315.10136 - page 14

    The following recommended accessories are currently available at Sears retail stores. • High Speed Bits (For wood or metal) • Masonry Bits • Wood Boring Bits • Hole Saws • 1/2 in. Chuck (9-2980) 1/2 in. Max. 3/4 in. Max. 1-1/2 in. Max. 2-1/2 in. Max. _IL WARNING: The use of attachments or accessories not listed might be hazardous. _, WARN ...

  • Craftsman 315.10136 - page 15

    Page 15 ...

Produzent Craftsman Kategorie Drill

Dokumente, die wir vom Produzenten des Geräts Craftsman 315.10136 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Craftsman
- Bedienungsanleitungen 315.10136
- Produktkarten Craftsman
- Informationsbroschüren
- oder Energieetiketten Craftsman 315.10136
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Craftsman 315.10136.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Craftsman 315.10136, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Craftsman 315.10136. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Craftsman 315.10136 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Craftsman 315.10136, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Craftsman 315.10136 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Craftsman 315.10136 verständlich ist.

Eine gänzliche Bedienungsanleitung von Craftsman sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Craftsman 315.10136 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Craftsman 315.10136 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Craftsman 315.10136, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Craftsman 315.10136 - die uns die ersten Schritte während der Nutzung von Craftsman 315.10136 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Craftsman 315.10136 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Craftsman 315.10136 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Craftsman 315.10136?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Craftsman 315.10136 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Craftsman 315.10136 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)