Bedienungsanleitung BenQ S660C

174 Seiten 3.67 mb
Download

Zur Seite of 174

Summary
  • BenQ S660C - page 1

    S660C M obile Phone Us e r ’ s M a n u a l ...

  • BenQ S660C - page 2

    Copy r ig ht © 2004. BENQ Corporation. All rig hts reserved. No part of this publication may be r eproduced, transmitted, transcr ibed, stored in a retrieval system or translated into any language or co mputer language, in any form or b y any means, electronic, mechanical, magnetic, optical, chemical, m anual or otherwise, without the p rior wr it ...

  • BenQ S660C - page 3

    Safety Information i Safety Infor mation Fo r your saf ety , please read the guidelines belo w carefully before y ou use yo ur phone: Exposure t o Radio F requency Signals Y our wireless handheld portable telepho ne is a low pow er transmitter and receiver . When it is ON, it r eceives and also sends out radio frequency (RF) signal s. Eur opean and ...

  • BenQ S660C - page 4

    ii Safety Information Antenna Care U se only the supplied or approved r eplacement antenna. U n authorized antennas, modificatio ns or attachments may damag e the phone and viol ate FCC regul ations. Phone Operat ion Normal P osition: Hold the phone as you would an y other telephone with the antenna poi nted up and ov er your should er . For y our ...

  • BenQ S660C - page 5

    Safety Information iii Electronic Devices Mo st mod ern electr onic equip ment i s shiel ded fr om RF si gnals. Ho weve r , certain electronic equipment may not be shielded against the RF signals from your wire less phone . Pa c e m a k e r s The Health Industry Manufacturers Associ ation recommends that a minimum separat ion of six (6") inch ...

  • BenQ S660C - page 6

    iv Safety Information Ve h i c l e s RF signals may affect improperly installe d or inadequately shielded electronic systems in motor v ehicles. Check with the manufacturer or its representativ e regarding yo ur vehicle. Y ou should also co nsult the manufacturer of an y equipment that has been added to y our vehicle. P osted Facilities T urn your ...

  • BenQ S660C - page 7

    Safety Information v For V ehicles Equipped w ith an Air Bag An air bag inflates with great force. DO NO T place objects, including both installed or portable wireless equipment, in the area ove r the air bag or in the air bag deployment area. I f in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could r ...

  • BenQ S660C - page 8

    vi Safety Information ...

  • BenQ S660C - page 9

    vii Table of Contents Table of Contents Safety Information ............... ......................... ..................... i 1. Preparing Your Phone For Use............ ......................... 1 Inserting a SIM Card ............................................................ 1 Installing a Battery and Charging the Phone ...................... 2 ...

  • BenQ S660C - page 10

    viii Table of Contents Making an Emergency Call ................................................ 36 Dialing an Extension Number ........................................... 36 Speed Dialing ...................................................................... 36 Voice Dialing ...................................................................... 37 ...

  • BenQ S660C - page 11

    ix Table of Contents Memory Status ....................................................................... 74 Voice Memo...................................................... .................. 75 Input Modes ....................................................................... 76 Changing the Text Input Mode ..................................... ...

  • BenQ S660C - page 12

    x Table of Contents Call Duration .......................................................................... 89 Call Cost .................................................................................. 90 Messages .................... .......................................................... 91 Organizer ........................................ ...

  • BenQ S660C - page 13

    xi Table of Contents WAP Settings................................. .................................... ........ 117 JAVA ..................................................................................... 121 Multimedia ....................................................... ................ 126 Picture ...................................... ... ...

  • BenQ S660C - page 14

    xii Table of Contents Call Waiting............................. ................................ .................. 146 Auto Redial .................................... .................................... ........ 146 Show Number ......................................... ................................ .. 146 Fixed Dial Number ................... ...

  • BenQ S660C - page 15

    Preparing Y our Phone For U se 1 Pr epar ing Y our Phone For U se Ins er t in g a SIM Ca rd 1. T ur n the phone ov er , and release the battery latch. Lift the battery off the phone. 2. Slide the SIM card in under the metal plate in the SIM card slot, with the SIM card's metal contacts facing down and the cut corner at the to p rig ht. Do not ...

  • BenQ S660C - page 16

    2 Preparing Y our Phone For Use Installing a Batter y and Charging the Phone 1. With the battery's metal contacts facing down, align the protruding tabs on the end with the holes in the battery bay of the phone. Then push the batter y toward the end of the bay to insert the batter y's tabs into the holes. Pr ess down to click the batter y ...

  • BenQ S660C - page 17

    Preparing Y our Phone For U se 3 2. Inser t the charger connector into the charger socket on the bottom of the phone. Mak e sure that the c onnector is inserted in the correct orientation (with the arrow pointing up). 3. Insert the charger into a power outlet. 4. Onc e the phone is fully charged, r emove the charger fr om both the power ou tlet and ...

  • BenQ S660C - page 18

    4 Preparing Y our Phone For Use / • Charging requires approximately 4 hours. • When charging the phone while it is turne d off, the external and main displays will be activate d, and the status indicator light will flash blue (during the charging process, the external displa y will show the time and cycl e through 3 animations, t hen turn off t ...

  • BenQ S660C - page 19

    Preparing Y our Phone For U se 5 Tu r n i n g t h e P h o n e O n 1. Open the phone's flip . 3. Enter your PIN1 n umber . If you enter the PIN1 number incorrectly , press ( Clear ) to delete th e incorrect numerals. Press and hold to de lete al l numera ls that have been en tered. After complet ing ent ry of your PIN1 numb er , press to confir ...

  • BenQ S660C - page 20

    6 Preparing Y our Phone For Use 8 The PIN (Personal Identificat ion Number) is a password provided by a network operator with a SIM card. Y ou need this password in order to use the SIM card. 4. When the PIN code ente red has been accepted, the phone will automatically se arch for the designated netw ork. This search proc ess may take a few seconds ...

  • BenQ S660C - page 21

    Preparing Y our Phone For U se 7 strength and the name of the netw ork operator . Y ou can now use the phone. 8 If the phone cannot detect the network, the on-screen signal stren gth meter will show no bars. 8 If the phone links to a net work that you are not authorized to use, the signal strength meter will show a level of zero. Y ou will only be ...

  • BenQ S660C - page 22

    8 Getting to Know Y our Phone Getting to Kno w Y our Phone Y our Phone at a Glance The figure below shows the main parts of your phone: Fron t v iew 1 External speaker External dis play Antenna Status indicator light ...

  • BenQ S660C - page 23

    Getting to Know Y our Phone 9 Fron t v iew 2 Earpie ce Main disp lay Microphon e Right soft key Scroll k ey OK key Dial/Answer k ey Alphanumeric keys P ower on/o ff key Mes sa g es m en u k ey Left soft k ey ...

  • BenQ S660C - page 24

    10 Getting to Know Y our Phone Bottom and top v iews Ac t iv e F l i p Fe a t u r e Opening the flip allows you to answer an incoming call. Closing the flip ends a call, cancels dial ing, or rejects an incoming call. Status Indicat or Light The status indicator light has the fol lowing functions: • Flashes blue when the phone detects a network or ...

  • BenQ S660C - page 25

    Getting to Know Y our Phone 11 Standby Screen External Display Wh en the flip is closed, the external display's status bar will show icon s for network signal strength, b attery powe r , and alarm (if active). The current time and an animation will appear in sequence. The exte rnal display can also alert you t o incoming calls, text messages, ...

  • BenQ S660C - page 26

    12 Getting to Know Y our Phone Ic ons in the External Display's Status Bar Icon Function Description Signal strength Signal strength of the network. The more bars indicated, th e stronger the signal. Battery status Shows the current level of battery power . The more bars indicated, the more power that remains. Fou r bars: fully charged. No bar ...

  • BenQ S660C - page 27

    Getting to Know Y our Phone 13 Outdoors Shows that the Outdoors profile is in use. Personal Shows that the Personal profile is in use. Handsfree Shows that the Handsfree profile is in use. Divert Shows that the call divert function is active.T o set the call divert function go to the menu Settings → Call Settings → Call Divert . See page 144. R ...

  • BenQ S660C - page 28

    14 Getting to Know Y our Phone Mai n Sc ree n Tim e a nd da te Status bar Name of network operator Soft key bar Wa l l p a p e r Press to enter the Phone Book Pres s to e nte r th e function/number shortcuts menu Press to en ter the main menu. ...

  • BenQ S660C - page 29

    Getting to Know Y our Phone 15 / • Y ou can set the animation or im a ge you wish to use as wallpaper when the phone is i n standby mode by goi ng to the menu Multimedia → Picture or Animation . Alternativ ely , yo u can go to the menu Settings → Display → Wa l l p ap e r . Se e page 126 and page 140. • T o set the current time and date , ...

  • BenQ S660C - page 30

    16 Getting to Know Y our Phone Ic ons in the Main Displa y's Status Bar Icon Function Description Signal strength Signal strength of the network. The more bars indicated, th e stronger the signal. Battery status Shows the current level of battery power . The more bars indicated, the more power that remains. Fou r bars: fully charged. No bars: ...

  • BenQ S660C - page 31

    Getting to Know Y our Phone 17 Vibrate In the stand by screen, press and hold to activate the silent profile. See page 54, "Using the Sil ent Profile". Normal Shows that the Normal profi le is in use. T o set the operatin g mode, go to the menu Settings → Profiles . See page 135. Meeting Shows that the Meeting profile is in use. Outdoor ...

  • BenQ S660C - page 32

    18 Getting to Know Y our Phone U sing the K eys in the Standby Mode 8 In this user manual , "long-press" means to press and hold down a key for about two seconds before release. " Press" means to press a key and release immediat ely . 8 The chart below is meant only t o introduce the commands accessible with keys when the phone ...

  • BenQ S660C - page 33

    Getting to Know Y our Phone 19 Key Commands and functions P ower on/off k ey • Long-press to turn the phone on or of f. • Press this key to reject inco ming calls or cancel a call being dialed. Send/Answer k ey • Press to send or answer a call. • Long-press and your phone will automatica lly call the last number dialed. • Press to access ...

  • BenQ S660C - page 34

    20 Getting to Know Y our Phone Scroll k ey • Press to open the main menu and show its first item. • Long-press to activate voice dialing. • Long-press to activate the voice memo function. Messages menu k ey • Press this key to enter the Messages menu. For a description of th e Messages menu, see p age 60. Asteri sk key • Press this key to ...

  • BenQ S660C - page 35

    Getting to Know Y our Phone 21 ~ Alphanumeric keys • Press to enter digit s in a phone number . • Shortcut key: Long-press a ke y to immediately access the function, or d ial the number , that it represents. S ee page 55, "Short cuts Menu". V o lume key • Long-press the upper or lower portion of this key , located on the left side o ...

  • BenQ S660C - page 36

    22 Getting to Know Y our Phone Alphanumeric keys 8 Long-pressing an alphanumeric key will access the function it represents, or dial the number that has bee n assigned to it (shortcut function). Key Digit Key Digit/Symbol/Function 17 28 39 40 5 * + (long-press) 6 # P(long-press af ter entering a phone number) ...

  • BenQ S660C - page 37

    Getting to Know Y our Phone 23 Men u Nav i g a t i o n Wh en the phone is in standby mode, press to bring up the main menu and highlight the first it em in that menu: Phone Book . 8 For details on how to use the vario us functions listed in the menu, see page 82, "Menus". Mai n me nu / Y ou can choose a display color for the menus by goin ...

  • BenQ S660C - page 38

    24 Getting to Know Y our Phone Sub -m e nu s Po p - u p m e n u s Pres s to return to th e previous menu or screen. Press t o enter the sub-menu repres ente d by highlighted item or to activate the highlighted function. The highlighted row is th e currently selected item. The name of the current menu. Pr ess to enter the highlig hted menu item for ...

  • BenQ S660C - page 39

    Getting to Know Y our Phone 25 T ur ning a funct ion on or off Pres s to turn the selected function on or off (the currently selected functio n will be highlig hted). After the selected function is activated, the d isplay will usually sho w further setting options. Press to scroll to the desir ed setting option . Pres s or to edit the setting. Pres ...

  • BenQ S660C - page 40

    26 Getting to Know Y our Phone Men u n av ig at i on e xa m pl e The example given belo w demonstrates how to use me nus to change the lang uage setting . Regu lar acces s 1.In the standb y mode, press or to open the main menu. 2.In the main menu, press to s crol l to the Settings menu icon. P ress to enter thi s menu. 3.In the Settings menu, pr es ...

  • BenQ S660C - page 41

    Getting to Know Y our Phone 27 A ccess thr ough number shortcuts 4.Press to s crol l to t he language you wish to use. Then press to confirm your selection . If, for example, y ou wish to set English as the display language, scroll to highlight English , and then press . The display will auto matically return t o the Settings menu, displa yed in En ...

  • BenQ S660C - page 42

    28 Getting to Know Y our Phone 2.The location of ite ms in the main menu corresponds to the position of the to keys in the alphanumer ic key pad. Thus, pr essing will bring up the Settings menu. 3.In the Settings men u, the alphanumer ic keys to represe nt menu items 1 to 10. Since Language is item numbe r 10 in the Settings menu, pressing will bri ...

  • BenQ S660C - page 43

    Getting to Know Y our Phone 29 5.Pr ess ( Back ) repeatedly or press once t o return to the standby scr een. ...

  • BenQ S660C - page 44

    30 Getting to Know Y our Phone Mai n m enu ma p Select To e n t e r When using the phone book stored in your SIM card's memory , the seventh item is SIM Status . There is no Privacy Manager item. ...

  • BenQ S660C - page 45

    Getting to Know Y our Phone 31 Select To e n t e r If your network vendor provides SIM toolkit value- added services, they will appear as item number 10. ...

  • BenQ S660C - page 46

    32 Getting to Know Y our Phone Select To e n t e r ...

  • BenQ S660C - page 47

    Using Y our Phone 33 Us i n g Y o u r P h o n e Mak ing a P hon e Cal l O pe n th e f l ip an d m ak e s ur e th a t t h e s ta nd b y s c r e e n i s s ho wn o n the main display . Enter the desired numbe r using the alphanumeric keys to . Press to dial your call. T o modify a phone number that y ou have e ntered, pr ess ( Clear ) to delet e indiv ...

  • BenQ S660C - page 48

    34 Using Y our Phon e Answer i ng a Ph one Ca ll Wh en a call is recei ved, your phone rings or vibrates, with the display sho wing the ca ller's number (if supported by your network vendor). If the caller is a contact stored in the Phone Book, the phone will show the name recor ded in the Phone Book. Depending on whether y our phone's fl ...

  • BenQ S660C - page 49

    Using Y our Phone 35 Re j e c t i n g a n In co m i n g Ca l l • R egardless of whether the flip is open or closed, you can r eject an incoming call by long-pressing the u pper port ion of the volume k ey on the left side of the phone. • W hen the flip is open, you can reject an incoming call by closing the flip or pressing . 8 If the flip func ...

  • BenQ S660C - page 50

    36 Using Y our Phon e Making an Emerg ency Call T o call emergency ser vices, enter 112 (the international emergency number) and then p ress to dial the call. Y ou can m a k e a n e m e r g e n c y c a l l e v e n i f y o u r p h o n e i s l o c k e d o r c a n n o t a c c e s s y o u r n e t w o r k , o r th e r e i s n o S I M c a r d i n s e r t ...

  • BenQ S660C - page 51

    Using Y our Phone 37 V oice Dialing 1. In the standby mode, long-press . 2. After a beep, when the displa y shows the "R ecording … " scr een, you can speak the vo ice dialing prompt for the nu mber you wish to dial. Once the phone has correctly identified the contact associated with this voic e dialing prompt, two situations may occur: ...

  • BenQ S660C - page 52

    38 Using Y our Phon e Listening to V oicemails Wh en your vo icemail inbo x contains new messages, y our network vendor will send a text message notifying you that y ou have new voicemail messages (if the network vendor supports it, the icons and will be shown in the external and main displa y's status bars, respectiv ely . There are tw o ways ...

  • BenQ S660C - page 53

    Using Y our Phone 39 Phone Book Adding Co ntacts to the Phone Book The Phone Book will hav e different formats an d data headings depending on whether you hav e chosen to use a phone book stored on your SIM card or in y our phone's memor y . 8 The phone book in your phone's memory can stor e up to 500 contact s. The capacity of a phone bo ...

  • BenQ S660C - page 54

    40 Using Y our Phon e Used to select a caller group for the contact. Press to select a group and then press . When there is an inco ming call from this cont act, the ring tone assigned to this group will sound and th e display will show the animation/image associ ated with the group. 8 T o set a ring tone and animation/image f or each caller group, ...

  • BenQ S660C - page 55

    Using Y our Phone 41 Phone Book in the phone's memor y 3. Aft er completing the data for the various fields, you m ust press in order for the c ontact's data to be stored in the Phone 1. In the standby scree n, enter the phone numbe r you wish to store, and then pr ess ( Sa ve ). The display will show the default data fields for a new con ...

  • BenQ S660C - page 56

    42 Using Y our Phon e Book. 8 If you do not wish to save a modified Phone Book reco rd, press or ( Back ) to abort. 8 Y ou can also add a n ew contact by going t o the menu Phon e Book → Add . • The default data fields for a contact are as follows: • In addition to the contact data fields described above, you can also add the data fie lds lis ...

  • BenQ S660C - page 57

    Using Y our Phone 43 The contact's work p hone number . Other phone number for the cont act. The contact's home address. The contact's work addre ss. The contact's co mpany name. The contact's depart ment name. The contact's job title. Used for notes about the co ntact. Used to mark dates of special significance associ ...

  • BenQ S660C - page 58

    44 Using Y our Phon e Finding Contacts in the Phone Book There are tw o ways t o locate a specific contact in the Phone Book: • Pr ess to scroll through the names (listed in alphabetical order) until th e one you want is highlig hted. • Pr ess the alphanumeric key that c orresponds to th e first letter of the name you wish to locat e the appr o ...

  • BenQ S660C - page 59

    Using Y our Phone 45 book stored in the phone's memory , you can copy the contact's data to the phone book stored on your SIM card. Con versely , if you are curr ently using a phone book stored on your SIM car d, you can cop y the contact's data to the phone book stored in the p hone's memor y . 8 The only informati on that can ...

  • BenQ S660C - page 60

    46 Using Y our Phon e • Edit : U sed to edit the Phone Book data for this contact. For information on editing, see page 39. 8 If you do not wish to save a modif ied Phone Book record, press or ( Back ) to abort. • Copy to SIM (Phone) : If you are curre ntly using a phone book stored in the p hone's memor y , you can copy the c ontact' ...

  • BenQ S660C - page 61

    Using Y our Phone 47 For example, to display the co ntact data stored in the fifth position in the Phone Book, you would press and then . Wh en the contact's data appears, you can perform the following tasks: • Scroll to the number that you wish to dial , and then press or to dial this number . • Pres s ( Option ) to edit, copy , or delete ...

  • BenQ S660C - page 62

    48 Using Y our Phon e 8 The icon will appear beside missed calls; the icon will appear beside dialed calls; th e will appear beside received calls. 8 If a phone numbe r has already been stored in the information for a contact in the Phone Book, the display will show the name of this contact. 8 If a call for the same n umber has been missed, dialed, ...

  • BenQ S660C - page 63

    Using Y our Phone 49  Delete All : Erases all the calls in the list. Oper ations Dur ing a Call 8 The following options marked with an asterisk (*) are dep endent on network support on may require a su bscription. Adj ust ing the Ear piece V olume During a call, you can press the vo lume key on the left side of the phone to adjust call vol ume. ...

  • BenQ S660C - page 64

    50 Using Y our Phon e Put ti n g a Ca l l o n Ho ld * 1. Whe n the only call is active: a. Press ( Ho ld ) to hold this call. b. Press to end this call. 2. W hen the only call is on hold: a. Press ( Un h o l d ) to resume th e call. b. Press to end this call. 3. W hen there is an activ e call and a call on hold. a. Press ( Sw a p ) to resume the ca ...

  • BenQ S660C - page 65

    Using Y our Phone 51 Call W aiting* If ther e is an incoming call while you ar e on the phone, a tone will sound through the earpiece and the display will show that a second call is curr ently waiting. Y ou can handle the waiting call and currently active call in the f ollowing ways: 1. Answer the waiting call: P ress The currently active call will ...

  • BenQ S660C - page 66

    52 Using Y our Phon e Call Records Allows you t o view information on missed, receiv ed, and dialed calls. See page 47, "Last Missed, Dialed, and Recei ved Calls". Conference* Confere nce calls allow you t o con verse with more than one part y at a time. The confer ence menu c ontains the following options: 8 The maximum number of parties ...

  • BenQ S660C - page 67

    Using Y our Phone 53 Send DTMF Wh en the phone is connected with other devices or serv ices, you can send DTMF (Dual T one Modulation F requency) strings. DTMF strings are k ey pad tones that can be sent via the microp hone as you dial another number . Y our phone will emit the tones in orde r to comm unicate with answering machines, pagers, comput ...

  • BenQ S660C - page 68

    54 Using Y our Phon e SMS Enters th e SMS (Short Me ssage Service — i.e. text message) menu. For details on the SMS menu, see page 60, "M essages Menu". Calculator Allows you to use the calculat or . For information about the calculator , see page 98. STK Brings up the menu for the STK (SIM T oolkit) serv ices pro vided by your network ...

  • BenQ S660C - page 69

    Using Y our Phone 55 Shor tcuts Me nu Y ou can use the Shor tcuts menu to assign 9 alphanumeric keys as shortcuts to commonly used fu nctions or frequently diale d numbers. Entering the Shortcuts M enu Setting Function Shor tcuts 1. In the Shortcut s menu, press to move the selection box t o the number key y ou w ish to use as a shortcut key ( is s ...

  • BenQ S660C - page 70

    56 Using Y our Phon e 3. From the Add Fu n c t i on menu, press to select the function to be repr esented by the shortcut key , and then press . Alternativ ely , you can pr ess a corresponding alphanumeric k ey to select the function you want. 8 The functions listed in th e Add Function menu are selected from various other menus. For detail s on th ...

  • BenQ S660C - page 71

    Using Y our Phone 57 6. T o cancel a shortcut key and restor e the key's original function, use to mov e the selection box to the ic on for the shor tcut key that you wish to cancel, and the n press ( Option ). Select Delete t o cancel the shortcut. 8 If you se lect Delete All , all shortcut settings will be cancell ed. ...

  • BenQ S660C - page 72

    58 Using Y our Phon e Setting Phon e N umber Shortcu ts 1. The method for setting a phone number shortcut key is largely the same as for a function shor tcut key . After selecting the shortcut key , press ( Option ) to bring up a pop-up menu. Aft er selecting Add Phone , press to confirm. 2. From the Phone Book, select a c ontact, and then press . ...

  • BenQ S660C - page 73

    Using Y our Phone 59 U sing Function and Phone N umb er Shortcuts There are tw o ways to use shortcuts: 1. Fr om the standby screen, lon g-press t o t o access the function represented b y that key or dial the number it represe nts. 2. From the standby screen, pr ess ( GoT o ) to en ter the Shortcuts menu. Y ou can then: a. Press to move th e selec ...

  • BenQ S660C - page 74

    60 Using Y our Phon e Me ss a g e s Me n u Y our phone suppor ts SMS (Shor t M essaging Ser vice) text messaging and EMS (Enhanced M essaging Serv ice), which allo ws you t o add graphics and ring tones to y our messages. Y ou can use this menu to view , edit, and send SMS and EMS messages. Fr om the standby screen, press to enter the Mes s ag e s ...

  • BenQ S660C - page 75

    Using Y our Phone 61 • If there is a flashi ng icon on the external display , and the main display shows a red icon , this means that the SIM card 's message memory is full. When the SIM card's memor y is full, your phone will not be able to receive any new messag es. If this has occurred, whe n you go to the Messages menu, the display ...

  • BenQ S660C - page 76

    62 Using Y our Phon e Create 2. When writing a message, press ( Option ) to perfo rm the following tasks: • Inser t : Y ou can inser t the fol lowing ty pes of obje cts:  Te x t : This is a l ist of template s that can be used instead of entering all the character s individually . Y ou can use the fac tor y defa ult tem plate s or tem plates o ...

  • BenQ S660C - page 77

    Using Y our Phone 63  Picture : Y ou can select an EMS icon fr om the EMS icon librar y to insert into your message. P ress to select the name of the icon y ou wish to insert, and then press ( Vi ew ) to view the icon. Press to insert the icon into your message.  Animation : Y ou can select an EMS animat ion from the EMS animation librar y to ...

  • BenQ S660C - page 78

    64 Using Y our Phon e • Before en tering any phone n umber , you can press ( Selec t ) and then select a recipient from the list of contacts in the Phone Book. Follo w the steps below : a. Pr ess to scroll to the name of contact, and then press ( Select ) to select that contact. b . The display will show all the phone numbers stor ed for the cont ...

  • BenQ S660C - page 79

    Using Y our Phone 65 • Save to Draft : Sav es the message to the Drafts folder , for sending at a later time. • Edit Content : Allo ws you to edit the conte nts of the message. SIM Folder The messages in the SIM folder are the messages stor ed in your SIM card's memor y . Inbox If your SIM car d was previously used in another phone, any me ...

  • BenQ S660C - page 80

    66 Using Y our Phon e • Copy All to Phon e : Copies all messages to the phone's memor y . 8 The messages moved to the pho ne will be erased from the SIM card's memory , and cannot be moved back. 8 When there is 1K or less of free space in the phone' s memory , the screen will display the message "Memory Insufficient! " an ...

  • BenQ S660C - page 81

    Using Y our Phone 67 Yo u c a n n o w : • Pres s ( Option ) , w hich wi ll p resent the fol lowi ng ch oices :  Create : Allows y ou to write and send a new message.  Delete : Deletes the selected message.  Call : Y ou can use the phone numbe r used to send the message to call the sender .  For wa rd : Allows you to edit the content o ...

  • BenQ S660C - page 82

    68 Using Y our Phon e • Sav e the phone number fr om which the message was sent (the number sho w n on the display in the "Send er Info" item) t o the Phone Book. • Save the phone number displayed in the message's contents. (the option for a directly displayed number). • If the message is an EMS message with an attached picture ...

  • BenQ S660C - page 83

    Using Y our Phone 69 Te m p l a t e Y ou can use the quick message templates in this menu to c ompose a mes sage w it hout hav ing to enter th e enti re text ch ara cter by chara cter . Y ou ca n use the fa ctor y def ault te mplates, or temp lates that you pr ev iously sav ed to the list. Scroll to the desir ed template and then press to ent er it ...

  • BenQ S660C - page 84

    70 Using Y our Phon e  Res e nd : Allows you to edit and send the message t o its original recipients.  For wa rd : Allows you t o edit and forward the message to other recipients.  Delete : Deletes the message. Drafts This option allows y ou to preserve message drafts that you ha ve saved . Sc rol l to t he d esi red m ess age record , a ...

  • BenQ S660C - page 85

    Using Y our Phone 71 Mes s ag e S et t i ng s This menu item includes a number of options for adjusting message settings: V oicemail N o. Y ou can save y our voic email phone number her e. Short Message Setti ng Sav e New Msg to Her e you can d etermine whether a new message will be s a v e d t o t h e p h o n e ' s m e m o r y o r t o y o u r ...

  • BenQ S660C - page 86

    72 Using Y our Phon e • GPRS : U se only the GPRS network to se nd and receiv e SMS messages. • CSD : U se only the dialup network to send and rec eive SMS messages. • GPRS Pre ferred : U se the GPRS network prefer entially . Only if there is no GPRS network present will the dialup network be used. • CSD Pr eferred : U se the dialup network ...

  • BenQ S660C - page 87

    Using Y our Phone 73 Broadcast Cell broadcast messages are general messages that your network operator broadcasts to all phones wi thin a particula r area. These messages are br oadcast in numbered channel s. For e xample, channel 030 might be for local w eather , 060 for traffic repor ts, 080 for informa tion about local hospitals, taxis, pharmaci ...

  • BenQ S660C - page 88

    74 Using Y our Phon e respectiv ely . The largest possible range is 0 to 65534. Y ou are no longer limit ed to selecting only single channels, but can specify a range. After the list has stored the to pic range, you can select a specific topic and then press ( Option ) to add it t o the list. Y ou can also edit or delete selected to pics. Languag e ...

  • BenQ S660C - page 89

    Using Y our Phone 75 Vo i c e M e m o 1. W hen the phone is in the standby mode, long-press . 3. After y ou are finished r ecording, pr ess ( Sav e ) to sa ve the voic e memo. Enter the name of the recor ding and then press . 4. After you sa ve the vo ice memo, the displa y will show the name of the vo ice memo. Y ou can now: a. Pr ess ( Option ), ...

  • BenQ S660C - page 90

    76 Using Y our Phon e Inp ut Mode s Changing the T ext Input M ode The input mode ic ons (names) that may appear in the upper right corner of the screen r epresent the following input modes: b . Pr es s t o play the voic e memo. In the voice memo scr een, you can press to play the pr ev ious or next memo. Uppercase letters input mode. Lowercase let ...

  • BenQ S660C - page 91

    Using Y our Phone 77 Letter Input M ode (ABC) In this mode, press the k ey containing the desi red letter re peatedly to scroll thr ough the available characters in order until it is rea che d. Ho w to use the letter input mode • Y ou must press the key c orresponding to the desired letter the correct n umber of times in order to ent er the lette ...

  • BenQ S660C - page 92

    78 Using Y our Phon e Pred ict ive In put Mode (iT ap ) iT ap analyz es letters as they being inputted, making intelligen t predictions about the wor ds you are att empting to enter , and speeding up text entry . Ho w to u se iT ap • Pr ess once the alphanumeric k ey corresponding to the first letter of the wor d you wish to enter without conside ...

  • BenQ S660C - page 93

    Using Y our Phone 79 Example of iT ap in use T o enter "COME HOME" in the message editing screen using iT ap , use the following steps: 1. Pr ess to switch to iT ap for uppercase letters (IT AP). 2. Pr ess to select C, O , M, E. 3. Press to enter "COME" as te xt. A space will automatically be in serte d after " COME" . ...

  • BenQ S660C - page 94

    80 Using Y our Phon e Direct Connection t o URLs Y our phone provides handy preset URL text hotk eys, enabling you to enter a compl ete URL more quickly and con veniently , and making Internet acc ess more efficient and enjoya ble. Fr om the standby screen, you can rapidly k ey in numerical URLs. If, for example, y ou wish to enter "http://123 ...

  • BenQ S660C - page 95

    Using Y our Phone 81 • After you press to ent er "http://" press to ente r "/" and "-". For e xample, if after y ou enter "123" and then pr ess once-causing "http://123.c om" to appear on the screen-you press again, the URL will change to "http://123.com/". Pr essing again will sw itch b ...

  • BenQ S660C - page 96

    82 Menus Me nu s The phone's menus p rovide various features. The main menu consists of 9 ic ons. Each icon repr esents a particular menu item, which is used to access r elated sub-menus. For information about na vigating menus, see page 23, "Me nu Nav i g a t i o n " . Phone Book This menu pr ovides various functions for managing th ...

  • BenQ S660C - page 97

    Menus 83 Edit After selecting a particular contact, you can follow the proc edure described on p age 39 for editing the data for this contact. Copy If you ar e using the phone book stored in the phone's memory , you can c opy contact data to the SIM card's ph one book, and vice versa. Y ou can select a contact to copy from one phone book ...

  • BenQ S660C - page 98

    84 Menus • Pres s ( Option ): U s ed to select th e ring tone or animation/image that will help you ide ntify the caller group to which a part icular caller belongs, or to r ename the caller gro up . • Pr ess : Allows yo u to view a list of all contacts that bel ong t o the c alle r gr oup . Pr ess to hi ghligh t th e de sir ed contact, and the ...

  • BenQ S660C - page 99

    Menus 85 Add to choose co ntacts to include in the list. 2. Y ou can select all the members of a caller group to be added to a list, or y ou can sele ct contacts from the Phone Book individually (the sc reen wil l first display the caller group option). Press to scroll to the caller group or contacts that you wish to add to the list, and then press ...

  • BenQ S660C - page 100

    86 Menus If you choose to activate the A ccept List, from no w on your phone wil l only be able to receiv e calls from contacts in the A ccept List. If, on the other hand, y ou choose to activate the Reject List, y our phone will not be able to recei ve calls from contacts in th e Reject List. 8 The same cont act cannot be inclu ded in both the Acc ...

  • BenQ S660C - page 101

    Menus 87 Ac t i v a t e My Num b e r T hi s o p t io n a ll o w s y o u t o s a v e y o u r S I M c ar d n um be r a nd na me to your SIM card's memory . Pres s ( Option ) and select Add . No w select whether you want to enter y our name or number and then press ( Edit ) or to begin entering the inf ormation. When y ou are fi nished, pres , an ...

  • BenQ S660C - page 102

    88 Menus Cal l Records 8 Y our network operator mu st support this featu re in order for you to be able to use it. This menu includes a list of y our missed calls, dialed calls, and received calls. Call costs and time are also recorded. Missed Calls Shows y our most recent missed calls. Press to scroll to the missed call that you wish to select. Y ...

  • BenQ S660C - page 103

    Menus 89 Call Du rati on 8 This feature is only accessible if supported by yo ur network operator . Las t Ca ll T ime Shows the duration of the last call. All Calls Ti me Shows the total time for all calls. Receive d C al ls Ti me Shows the total time for all rec eived calls. Dialed Call s Time Shows the total time fo r all dialed cal ls. Clear Cle ...

  • BenQ S660C - page 104

    90 Menus Call Cost La st Call Cost Shows the cost of your last call. 8 Requires the support o f the network operator . All Calls Cost Shows the total c ost of all calls. 8 Requires the support o f the network operator . Clear Clears all call cost recor ds. 8 Requires entry of the PIN2 code. Call Cost Limit Shows the current limit set for total call ...

  • BenQ S660C - page 105

    Menus 91 Mes s a g e s For a description of the featur es available in the me ssages menu, see page 60, "Messages M enu". ...

  • BenQ S660C - page 106

    92 Menus Org anizer Calenda r Y ou can use the Calendar to set up memos for forthcoming eve nts such as a meeting, an appointment, or a friend's birthday . The Calendar will also remind y ou about events y ou have previously scheduled. 3. In the memo editor scr een, scroll t o the data field you wish to edit, and then press ( Edit ) or , or pr ...

  • BenQ S660C - page 107

    Menus 93 keys to beg in ente ring data. Y ou can enter data in these fields: 4. After completing entry of data in each of the fields, you must press to sav e the memo to that dat e. The phone will display this date's memo list, incl uding the event name and time for the memo you just sav ed. If the Al arm Clock has been s et to remind you abou ...

  • BenQ S660C - page 108

    94 Menus appear beside the event name. 5. Y ou can now perfor m the following tasks: a. Press ( Option ) to select whether t o edit or delete the memo . b. Press to v iew the information in the memo. Then press ( Option ) to edit o r delete the mem o c. Press ( Back ) to retu rn to the Calendar scr een. Y ou can move the re d box to ot her dates to ...

  • BenQ S660C - page 109

    Menus 95 you can sel ect Delete All to delete al l of them. 3. In the list screen, if there are an y to do ite ms that have alr eady been completed, you can scroll to the it em and then press to mark it to re mind yourself that the task has been done. If y ou press ( Option ), y ou can activa te the Au t o D e l e t e , which w ill automatically cl ...

  • BenQ S660C - page 110

    96 Menus To o l s Alarm Clock U se the following steps to set an alarm: / If you activate t he Alarm Clock feature, when the specified date and time arrive, the phone will sound the alarm, even if your phone is turned off. Day U sed to set the alarm to go off on a particula r day fr om Mo nday to Sunda y . Press ( Edit ) t o display the days of the ...

  • BenQ S660C - page 111

    Menus 97 3. Lastly , you m ust press to sav e all your current Alarm Clock settings. A fter c ompleting Ala rm Clock settings, will appear in the external displa y's status bar; will appear in the main display's status bar . Shor tcuts For a description of the features acc essible through the Shortcuts menu, see page 55, "Sh ortcuts ...

  • BenQ S660C - page 112

    98 Menus Calculator C ur rency Con ver ter Below is a description of the Currency C onv erter screen: 1. T o set the currencies for con version, press ( Option ) and select either C urrency 1 (to set the currency at the top of the screen) or Currency 2 (to set the currency at the bottom of the screen), then press to confirm. Afte r selecting a curr ...

  • BenQ S660C - page 113

    Menus 99 2. U se d to set the exch ange rate. Pres s ( Option ) and select Rat e Setting , then enter the rate for con verting from Curr ency 1 to Cu rrency 2. The con versi on calculation result will be display ed in the same line as the bottom currency on the scr een. U se the to view the calculation r esult. The calculation can pro vide precisio ...

  • BenQ S660C - page 114

    100 Menus Stopwat ch 4. Once the stopwatc h is halted, press ( Re s e t ) to zer o the stopwat ch. Countdown Timer 1. Enter the amount of time to c ount do w n. Y ou can set any time up to 23 hours, 59 minutes and 59 sec onds. 2. W hen you pr ess , the countdown timer will begin counting down to z ero . When th e countd own is finished, the screen ...

  • BenQ S660C - page 115

    Menus 101 "Stop T i mer?" message will appear . If y ou press ( Ye s ), the count down timer will stop and return to the timer scr een. If you pr ess ( No ), you will exit the countdo wn timer screen, but the count down timer will continue the c ountdown. Y ou can then perform other tasks, and when the countdown is finished, the "Ti ...

  • BenQ S660C - page 116

    102 Menus Games Y our phone provides a number of exciting games that y ou can use to entertain y ourself when you have a spar e moment. Champion S occer 1. After choosing this option, select Star t to enter the game's o pening screen. P ress and select ST AR T to begin a ne w round of play . 2. Select W orld Cup M ode or Arcade Mode. This game ...

  • BenQ S660C - page 117

    Menus 103 3. In the W orld Cup M ode, y ou can select your own team with the opposing team selected at random by the p hone. If your team wins, yo u face the next team as you make a c hallenge for the W orld Cup title. I n the Arcade M o de, you can select your own team and the opposing team t o play a single game. P ress to select a flag represent ...

  • BenQ S660C - page 118

    104 Menus Game Contro ls During the game, y ou need to contr ol your thr ee players on the pitch, while y our goalkeeper is contro lled by the phone. • Wh en attacking, use to , and (the alphanumeric keys, ex cepting ) to mov e the play ers. Use to to pass the ball (you will see the play er's number on the screen), and when near the goal, pr ...

  • BenQ S660C - page 119

    Menus 105 • I f y o u w a n t t o s t o p a g a m e d u r i n g p l a y , p r e s s a n d . Game screen Game options • ST ART : Begins a new game. • Continue : Resumes an interrupted game. U sable only in the W orld Cup M ode. • Controls : Brings up an explanation of how to use k eys during a game. • Ranking : Rec ords the rankings of the ...

  • BenQ S660C - page 120

    106 Menus • Option :  Sound : Pr ess to adjust the volume, or to turn off background music.  Mini Map : Sho ws/hides the full pitch view.  Tim e : Sets the duration of a half. • Exit : Quits this game. ...

  • BenQ S660C - page 121

    Menus 107 Dragon Fig ht The flying dragon that you control must mak e incursions int o hostile territory and destroy enemies. Selec t Star t to ente r the game's opening screen, and then press to begin play . The more enemies yo u destroy , the hig her your sc ore. If y ou collide int o an enemy , you lose one flying dragon. Pr ess to cont rol ...

  • BenQ S660C - page 122

    108 Menus Inter net Y our phone includes a built-in W AP browser , allowing you to use the phone for mobile Internet c onnectivit y . Y ou can browse the online ser vices offered by the ne twork operator or ISP , such as information on financial news, sports, travel, and ent ert ainment. T o use the phone to get online, nec essar y W AP and GPRS se ...

  • BenQ S660C - page 123

    Menus 109 Start Browser Starts up the bro wser and connects t o the homepage. Browsing a webpage R e f e r r i n g t o t h e s o f t k e y c o m m a n d s a t t h e b o t t o m o f t h e screen, press and to perform needed tasks while bro wsing a webpage. Pr ess t o s c r o l l u p o r d o w n a webpage. For detai ls on browsing a webpage, inq uire ...

  • BenQ S660C - page 124

    11 0 Menus Ho w to display the b rowser's menu Whi le v iewing a W AP webpage, press to displa y the browser's men u. Referring to the soft k ey commands at the bottom of the screen, press and to access the various options. Press the corresponding alphanumeric keys to directly select an option. The bro wser menu contains the following ite ...

  • BenQ S660C - page 125

    Menus 111 Bookmarks Y ou can open the Bookm arks menu and select webpage bookmarks. Vie w Allows you t o see the current bookmarks and bookmarks folders. Scroll t o the de sired boo kmark or bookmarks folder , and you can: • Press ( Go ) to link to the w ebpage that the bookmark represents. I f you ha ve selected a bookmarks folder , selec t the ...

  • BenQ S660C - page 126

    11 2 Menus  Hot ke ys : Allows you set a numerical key as a hotkey for a bookmark. After completing the setting, you can pr ess this numerical k ey to directly link to the webpage r epresented by the bookmark. Mar k Si te Adds the current webpage t o your bookmarks list. GoT o URL Pr ess ( Edit ) and enter the URL of the webpage that you wish to ...

  • BenQ S660C - page 127

    Menus 11 3 Hom ep a ge Designates a homepage. When you start up the W AP bro wser or if you select Home from the br owser's menu, the scr een will display the homepage y ou designate. a. Pr ess ( Edit ) and then enter the URL of the w e b p a g e t h a t y o u w i s h t o u s e a s y o u r h o m e p a g e . (Some W AP serv ice pr oviders do no ...

  • BenQ S660C - page 128

    11 4 Menus K ey Press Timeout This option sets the amount of time that the phone waits during text entry before auto matically advancing the cursor to the ne xt entr y position. As long as the same key is r e-pressed within the interval of time set here, it will co ntinue to cyc le through the characters available through that key . Set Pr oxy Y ou ...

  • BenQ S660C - page 129

    Menus 11 5 C urre nt C erti fi ca te Displays information on the certificate currently in use. CA Certificates Displays information on the built-in c ertificate. A certificate is a digital ID issued by a trusted third part y known as a cert ificate authority (CA) . The phone uses CA certificates to au thenticate websites that send information to th ...

  • BenQ S660C - page 130

    11 6 Menus View T itle Region Y ou can choose whether or not to hav e the bro wser display webpage titles. Y ou can also set this option so that titles e xceeding a c ertain length will be split into separate lines. (The first line of the bro wser displays a "G" and a globe image, while the second is the "ti tle region". The act ...

  • BenQ S660C - page 131

    Menus 11 7 W AP Message Starts up the browser and displa ys the W AP inbox so you can read W AP messages. Enter A ddress Starts up the bro wser and connects t o the URL you e nter . Resu m e Returns to the last webpage y ou viewed. Clear Cache Clears webpage co ntent that the bro wser temporarily stores in memory . WA P S e t t i n g s In this menu ...

  • BenQ S660C - page 132

    11 8 Menus By scrolling to a particular group of W AP ser ver settings that you wish to modify , and then pressing ( Option ), y ou can create a new gr oup of settings, ed it the settings, or delete the settings. W AP ser ver settings include the fields listed below . Press ( Edit ) to edit the setting in eac h field. When y ou are finished with th ...

  • BenQ S660C - page 133

    Menus 11 9  GPRS/CSD : U se the GPRS network prefer entially . Only if there is no GPRS n etwork present will the dialup network be used.  GPRS : U se only the GPRS network.  CSD/GPRS : U se the dialup network pre ferentially . Only if there is no dialup network will the GPRS network be used.  CSD : U se only the dialup network. • GPR ...

  • BenQ S660C - page 134

    120 Menus  Dial N umber : W hen you start up the br owser t o connect to the Int ernet, you phone will dial this number . Y our telecoms network operator or ISP will provide this number to you.  Us e r Na m e : This is your user ac count name, and is provided by yo ur network operator .  Pa ss wo rd : The account passwo rd pro vided by the ...

  • BenQ S660C - page 135

    Menus 121 JA V A Y our phone provides J ava support, al lowing y ou to download and install Ja va applications that you lik e, such as various Java games, from sites pr ovided by your netw ork operator . Y ou can then run these Ja va applications directly on y o ur phone. If y ou do not need an application, you can remov e it from your phone at an ...

  • BenQ S660C - page 136

    122 Menus • Networ k Access : Some ty pes of J ava games ar e only pla yable online (for example, mahjong) , and using the phone to go online entails an extra cost. H oweve r , it may not be possible t o determine from a game 's name alone whether or not it is an online game. Therefor e, this setting allows y ou to be pr esented a p r o m p ...

  • BenQ S660C - page 137

    Menus 123 Downloading JA V A applications 1. T o download Ja va applications from the Int ernet, go the menu Internet → JA V A → OT A , and enter t he URL for t he down load site. P ressing w ill start up the Ja va download pr ogram and link to th e specif ied site to begi n downlo ading a Java application. 2. If yo u provide a confirm c ommand ...

  • BenQ S660C - page 138

    124 Menus Managing and running J A V A applications T o manage and r un Ja va applications installed on the phone, go to the menu JA V A → Applications Br owser . All Java applications will be listed in this men u. The Applications Bro wser menu ser ves as a f i le m a n a g e r , a n d th e gr ou p s l i s t ed wi t h i n i t c an be t h o u g h ...

  • BenQ S660C - page 139

    Menus 125 • Pr ess to show the names of the ex ecuta ble files of the applications. Scroll to the desired ex ecutable file and press to run the corresponding J ava application. 8 After start ing up a Java application, use the keys corresponding to the commands shown in the sof t key bar in the lower part of the screen to control that application ...

  • BenQ S660C - page 140

    126 Menus M ult imedia Picture This image librar y stores the ph one's default pictures, as well as images recei ved in EMS messages, or do wnloaded through W AP serv ices or using m ultimed ia communications t ools. Scroll to the desired pictur e to access the follo wing options: • Pr ess to displa y this picture. P ressing wil l d ispl ay ...

  • BenQ S660C - page 141

    Menus 127  Infor mat ion : Displays the picture's name, file siz e, and whether the file is a default pictur e, a picture you ha ve saved or one you do wnloaded yourself (noted as U ser Defined ).  Set W allpaper : U se the picture as the wallpaper for the standby screen. Animation This animation library stores the phone's default a ...

  • BenQ S660C - page 142

    128 Menus Scroll to the desir ed ring tone, and press ( Option ) to perform the following tasks w ith the r ing tone: • Set Ringtone : M akes the ring tone the ale r t sound for incoming calls. 8 Ring tones that support the EMS format (such as Chimes High ) cannot be set as t he phone's alert sound for i ncoming calls, so they do no t offer ...

  • BenQ S660C - page 143

    Menus 129 Composer Y ou can edit your own polyphonic ring tone melodies, and use them as alert sounds for incomin g calls. A polyphonic ring tone consists of musical tones i n multiple channels. The Composer fu nction allows you to create a maximum of 8 channels, mixing them to creat e the final polyphonic ring tone. No te fo r m a t Enteri ng defa ...

  • BenQ S660C - page 144

    130 Menus Adjusting the length of a note The default note length is a quarter note (the screen uses the number 4 to r epresent a quarter note). Press to increase the not e's length (the number on the screen will increase); pr ess to reduce the note's length (the number on the screen will decrease). V arious note lengths are re presented b ...

  • BenQ S660C - page 145

    Menus 131 Steps for c reating a poly phonic ring tone 1. The first time you ente r the Compose r menu, yo u w ill see 8 channels that y ou can select for editing. Each channel can be used to save one passage of music that you ha ve creat ed. Scroll to the channel that y ou wish to edit, and then press to enter the ring tone editing window to begin ...

  • BenQ S660C - page 146

    132 Menus 5. When y ou a re finished w ith al l the cha nnels tha t you wish to fill w ith notes, press ( Option ) in the channel list screen t o access the follo w ing options: • Play All : Pla ys the polyphonic r ing tone that r esults from mixing all channels. • Play Channel : Plays the channel y ou hav e currently scrolled to (if this chan ...

  • BenQ S660C - page 147

    Menus 133 Settings Date & Ti me U sed to set the time and date, as well as the format in which the time and date w ill be displayed on the startup screen. Tim e 2. After selecting the Set mode, you can c omplete the date and time fields. For ma t This option is used to decide the format in which the time and date will appear in the standby scr ...

  • BenQ S660C - page 148

    134 Menus Secondary Time Po w e r O n / O f f Allows you turn the phone on and off at specified times to conser ve power. Pow e r O n Designates a time for the phone t o be automatically turned on. If this option is activated, the phone wi ll be automatically turned on at th e designated time each da y . Pow e r O ff Designates a time for the phone ...

  • BenQ S660C - page 149

    Menus 135 Profi les A profi le is a group of settings that determine whether the phone will aler t you to inc oming calls through a ring tone or a vibrating alert, and how ring to nes in general are used on the ph one. These setting s allow the phone's operation to best suit the environment you ar e in. 1. Press to scr oll to the desired pr of ...

  • BenQ S660C - page 150

    136 Menus Outdoors The options in this profile ha ve been preset to suit an outdoor activ ity (for example, use of the h ighe st ring tone v o l u m e, ac t i va ti o n o f b o t h r i n g t o n e a n d vi b r a t i n g al e rt s , and use of keypad tones). Once this profile is activated, the main displa y's status bar wi ll show the ; the ext ...

  • BenQ S660C - page 151

    Menus 137 on the sta ndby scr eens. 8 The default prof ile name "Personal" or the n ame you give to this profile will only appear on the externa l display when the phone's flip is opened. 2. Press to scr oll to the desired profile, and then pr ess ( Edit ) t o modify the settings listed below and adjust the profile to suit a particul ...

  • BenQ S660C - page 152

    138 Menus Me ss a ge R i ng The ring tone that yo ur phone uses when a message is recei ved. Alar m Ring The ring tone used by the Alarm Clock. Calendar Ring The ring tone used for Calendar events for which y ou hav e set an alarm. Ke y p a d T o n e Determines whether keypad tones ar e played when k eys are pr essed. Ring V o lume Answer Mode • ...

  • BenQ S660C - page 153

    Menus 139 Ren a m e Allows y ou to pro vide a new name for the profile (only available for the Pe r s o n a l profile). Res t or e R eturns the above settings for the profile to their factory default values. 8 Requires entry of the ph one password, whose def ault value is 1234. ...

  • BenQ S660C - page 154

    140 Menus Display Theme A display theme consists of a combination of display color and the standby screen wallpaper . Different display colors ar e paired with different preset wallpapers, so when y ou change the display c olor , the standby screen wallpaper will also change. Scroll to the c olor that you wish to use and then press ( Vi e w ) to pr ...

  • BenQ S660C - page 155

    Menus 141 We l c o m e M e s s a g e U sed to select and configur e the animation/picture/te xt that is display ed when the phone is turned on, as well as the music that is play ed. • Animation : Only the animation selected in this o ption w ill be displayed whe n the phone is turned on. • Picture : Only the pictur e selected in this option wil ...

  • BenQ S660C - page 156

    142 Menus Contrast Brig htness Press to adjust the brightness of the phone's display backlighting. Press to co nfirm the setting. Backlight Setting Y ou can turn the phone's keypad backlighting and display backlighting on or off, as well as set the length of t ime that backlighting w ill remain activated after the flip is opened or a key ...

  • BenQ S660C - page 157

    Menus 143 • Cyc l e : After the ext ernal display cycle s through displays of the time and animations, it will power off. After 15 sec onds, the exte rnal display will automatically po wer on an d again cycle throu g h the programmed items. • Always On : The external displa y wil l remain on, cy cling continu ously through displays of the time ...

  • BenQ S660C - page 158

    144 Menus Call Se ttings Call Div er t 8 Requires the support of the ne twork operator . For wa rd A ll Fo rwards all incomi ng calls to a designated phone number or v oicemail inbo x. When y ou use this feature, you must enter a phone number to whic h to for ward incoming calls. 8 After the Forward All mode is activated, th e standby screen will d ...

  • BenQ S660C - page 159

    Menus 145 Ca ll Barri ng Y ou can request that your network o perator block the dialing or recei ving of certain cal ls. The call barring ser vices below require the support of your network oper ator . T o activa te or cancel an y of the options below , you must ent er the network password pro v ided by the network operator . All Outg oing Blocks d ...

  • BenQ S660C - page 160

    146 Menus Change P assword Y ou can change the network password, which can be obtained from the network operator . Call W aiting If there is an inc oming call when you are in the middle of another call, the screen will display the number of the incoming call and call waiting message to alert you. Y ou can activate, canc el, or view the st atus of t ...

  • BenQ S660C - page 161

    Menus 147 Fixed Di al N umber After this featur e is activat ed, the phone will only be able to dial numbers on the Fixed Dial N umb er list. If a number is not on the list, calls cannot be made to this number . 8 When you activate or cancel this feat ure, you must enter the PIN2 code. Before acti vating the Fix ed Dial N umber feature, y o u must ...

  • BenQ S660C - page 162

    148 Menus Connect Alert This feature allows the phone t o provide a ring tone or vibr ating alert, or flash t he ba cklighting when the recipient of a call has answered. Minute Beep Once this option is activated, the phone wil l emit a beep once every minute during a call. Ne t wo r k Generally speaking, the choice of the network that y our phone u ...

  • BenQ S660C - page 163

    Menus 149 Manu al : If this option is selected, when outside the c ove rage of your regular network, the phone will list all the networks of te le com vend ors an d al low you to ch oo se . Av a i l a b l e L i s t Allows y ou to manually select a network. Y our phone will list all the networks of telecoms vendors so you can choose. 8 Not all netwo ...

  • BenQ S660C - page 164

    150 Menus Security Y ou can use a PIN code, phone password, and SIM car d lock authentication to pr event unauthorized use of the phone. PIN Code A PIN (P ersonal Identification N umber) code is a password provided by a network operator . When PIN code authentication is activated, it will prevent unauthorized use of the SIM card. U nless the correc ...

  • BenQ S660C - page 165

    Menus 151 Phone Lock Activat es/deactivates or changes the phone's star tup password. The startup password prevents unauthorized persons from using yo ur phone. Once the phone's password is activated, th e phone will be locked do wn when it is turned on unless this passwor d is correctly ente red. If an inc orrect password is ent ered, yo ...

  • BenQ S660C - page 166

    152 Menus password. 8 Y our phone can recognize a maximum of three different SIM cards. Before setting the SIM Lock featur e, you m ust enter the previously set SIM Lock password (the default SIM Lock password is 1234). The passw ord must be between 4 and 8 digits in length. Screen Lock U sed to creat e a securit y screensa ver . Whe n you ha ve no ...

  • BenQ S660C - page 167

    Menus 153 4. After completing settings, press . The phone will prompt y ou to enter and c onfirm the Screen Lock password. Y ou have two c hoices: a. If y ou do not wish to change the password, press to activate the Scr een Lock feature using the previously set password. b. If you wish to change the passwor d, enter the new password in the N ew Pas ...

  • BenQ S660C - page 168

    154 Menus Us er G ro up Us er Gr o u p U sed to create a closed group of callers based on a serv ice provided by the network operator . The members of a U ser Group can call each o ther , but cannot co nduct calls with any one outside the group unl ess special provisions are made. This option can be used to select whet her or not to activate this s ...

  • BenQ S660C - page 169

    Care and Maintenance 15 5 Care and M aintenanc e T ake not e of the points noted belo w to ensur e that you are using the phone properly and to extend the lifespan of the phone. • Store th e phone and its accessories out of the reach of children. • K eep the phone and accessories dry , and use the phone in en vironments where the t emperature i ...

  • BenQ S660C - page 170

    156 Care and Maintenance • A void allowing objects that may discharge electricity to contact the charging socket on the bottom of the phone or the metal contacts on the battery , as this may cause short circuits and put you in danger . ...

  • BenQ S660C - page 171

    T roubleshooting 157 T roubleshooting If you enc ounter pr oblems while using the phone, or if it performs erratically , you can consult the information in the chart below . If your particular pr oblem cannot be resolv ed using the information in the chart, contact the dealer wher e you pur chased the phone. Problem Possib le cause Solution Poor re ...

  • BenQ S660C - page 172

    158 T roubleshooting Shortened standby time • The standby time is related to your networ k operator's system configuration. The same phone used with dif ferent network operators' systems will not provide exactly the same length of standb y time. If you are loca ted in an area where signaling is weak, temporarily shut of f the phone. • ...

  • BenQ S660C - page 173

    T roubleshooting 159 Unable to connect to the network. • SIM card invalid. Contact your net work operator . • Y ou are not within the network's servi ce area. Check the service area with your network operator . • Poor signal. Move to an open spa ce, or if you are inside a building, move closer to a window . Y ou cannot answer incoming ca ...

  • BenQ S660C - page 174

    160 T roubleshooting Battery will not charge. • The battery or battery charger is damaged. Contact the dealer . • The phone's temperature is below 0 ° C or higher than 45 ° C. Adjust the battery charg ing environment to avoid extremes of tempera ture. • Poor contact bet ween the battery and charger . Check all connectors to make sure a ...

Produzent BenQ Kategorie Cell Phone

Dokumente, die wir vom Produzenten des Geräts BenQ S660C erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen BenQ
- Bedienungsanleitungen S660C
- Produktkarten BenQ
- Informationsbroschüren
- oder Energieetiketten BenQ S660C
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung BenQ S660C.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen BenQ S660C, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen BenQ S660C. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts BenQ S660C ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts BenQ S660C, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von BenQ S660C hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von BenQ S660C verständlich ist.

Eine gänzliche Bedienungsanleitung von BenQ sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von BenQ S660C bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von BenQ S660C befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich BenQ S660C, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts BenQ S660C - die uns die ersten Schritte während der Nutzung von BenQ S660C erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit BenQ S660C hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von BenQ S660C im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich BenQ S660C?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit BenQ S660C nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit BenQ S660C hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)