Bedienungsanleitung Asus JUMPERFREE PC133

92 Seiten 1.24 mb
Download

Zur Seite of 92

Summary
  • Asus JUMPERFREE PC133 - page 1

    ® CUPLE-VM JumperFree ™ PC133/VC133 133/100/66 MHz FSB Socket 370 Motherboard USER ’ S MANUAL ...

  • Asus JUMPERFREE PC133 - page 2

    ASUS CUPLE-VM User ’ s Manual 2 USER'S NOTICE Product Name: ASUS CUPLE-VM Manual Revision: 1.00 E778 Release Date: June 2001 No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, excep ...

  • Asus JUMPERFREE PC133 - page 3

    ASUS CUPLE-VM User ’ s Manual 3 ASUS CONT ACT INFORMA TION ASUST eK COMPUTER INC. (Asia-Pacific) Marketing Address: 150 Li-T e Road, Peitou, T aipei, T aiwan 1 12 T elephone: +886-2-2894-3447 Fax: +886-2-2894-3449 Email: info@asus.com.tw T echnical Support MB/Others (T el): +886-2-2890-7121 (English) Notebook (T el): +886-2-2890-7122 (English) De ...

  • Asus JUMPERFREE PC133 - page 4

    ASUS CUPLE-VM User ’ s Manual 4 CONTENTS 1. INTRODUCTION 7 1.1 How This Manual Is Organized ................................................. 7 1.2 Item Checklist ............................................................................ 7 2. FEA TURES 8 2.1 The ASUS CUPLE-VM ............................................................. 8 2.1.1 ...

  • Asus JUMPERFREE PC133 - page 5

    ASUS CUPLE-VM User ’ s Manual 5 CONTENTS 4.3 Main Menu ............................................................................... 43 4.3.1 Primary & Secondary Master/Slave .............................. 44 4.3.2 Keyboard Features ........................................................ 47 4.4 Advanced Menu ............................... ...

  • Asus JUMPERFREE PC133 - page 6

    ASUS CUPLE-VM User ’ s Manual 6 FCC & DOC COMPLIANCE Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause ...

  • Asus JUMPERFREE PC133 - page 7

    ASUS CUPLE-VM User ’ s Manual 7 1.1 How This Manual Is Organized This manual is divided into the following sections: 1. INTRODUCTION Manual information and checklist 2. FEA TURES Production information and specifications 3. HARDW ARE SETUP Intructions on setting up the motherboard. 4. BIOS SETUP Intructions on setting up the BIOS 5. SOFTW ARE SET ...

  • Asus JUMPERFREE PC133 - page 8

    8 ASUS CUPLE-VM User ’ s Manual 2.1 The ASUS CUPLE-VM The ASUS CUPLE-VM motherboard is carefully designed for the demanding PC user who wants advanced features processed by the fastest processors. 2.1.1 Specifications • Intel ® Celeron ™ /Coppermine ™ , Pentium III ® and VIA ® Cyrix ™ Pr oces- sor Support: Supports Socket 370 based Int ...

  • Asus JUMPERFREE PC133 - page 9

    ASUS CUPLE-VM User ’ s Manual 9 2. FEA TURES 2. FEA TURES Specifications • USB: Supports up to 4 USB ports, two on the back panel and two midboard, for more peripheral connectivity options. • PC Health Monitoring: Provides an easy way to examine and manage system status information, such as CPU and systerm voltages, temperatures, and fan stat ...

  • Asus JUMPERFREE PC133 - page 10

    10 ASUS CUPLE-VM User ’ s Manual 2. FEA TURES Performance 2. FEA TURES 2.1.2 Special Features • ACPI Ready: A dvanced C onfiguration P ower I nterface (ACPI) provides more Energy Saving Features for operating systems that support OS Direct Power Management (OSPM) functionality . W ith these features implemented in the OS, PCs can be ready aroun ...

  • Asus JUMPERFREE PC133 - page 11

    ASUS CUPLE-VM User ’ s Manual 11 2. FEA TURES 2. FEA TURES Intelligence 2.1.4 Intelligence • Auto Fan Off: The system fans will power of f automatically even in sleep mode . This function reduces both ener gy consumption and system noise , and is an important feature in implementing silent PC systems. • Dual Function Power Button: Pushing the ...

  • Asus JUMPERFREE PC133 - page 12

    12 ASUS CUPLE-VM User ’ s Manual 2. FEA TURES 2. FEA TURES Motherboard Parts Location Processor Support Socket 370 for Intel ® Processors .............................................. 2 ( NOTE: CPU thermal sensor is integrated on the motherboard, located near the center of the CPU heat source, just below the CPU socket) Chipsets VIA ® VT8601A ...

  • Asus JUMPERFREE PC133 - page 13

    ASUS CUPLE-VM User ’ s Manual 13 2. FEA TURES 2. FEA TURES Motherboard Parts 2.2.1 Component Locations - 3 23 21 24 24 8 1 5 7 15 6 9 11 13 12 10 19 17 20 22 18 16 14 ...

  • Asus JUMPERFREE PC133 - page 14

    14 ASUS CUPLE-VM User ’ s Manual 3. HARDW ARE SETUP 3.1 Motherboard Layout Motherboard Layout 3. H/W SETUP Grayed components are optional at the time of purchase. 19.2cm (7.56in) 24.4cm (9.6in) PCI 2 CUPLE-VM Socket 370 VIA VT82C686B Chipset PCI 1 DIMM Socket 1 (64/72-bit, 168-pin module) 0 1 DIMM Socket 2 (64/72-bit, 168-pin module) 2 3 Flash EE ...

  • Asus JUMPERFREE PC133 - page 15

    ASUS CUPLE-VM User ’ s Manual 15 3. HARDW ARE SETUP 3.2 Layout Contents Motherboard Settings 1) USBPWR1/USBPWR2 p . 17 USB Device W ake-up (Disable/Enable) 2) AC97_EN p . 17 Audio CODEC Setting (Disable/Enable) Expansion Slots/Sockets 1) System Memory p . 18 System Memory Support 2) DIMM1/2 p.19 DIMM Memory Module Support 3) Socket 370 p . 20 CP ...

  • Asus JUMPERFREE PC133 - page 16

    16 ASUS CUPLE-VM User ’ s Manual 3. HARDW ARE SETUP 3.3 Hardware Setup Procedure Before using your computer , you must complete the following steps: 1. Check Motherboard Settings 2. Install Memory Modules 3. Install the Central Processing Unit (CPU) 4. Install Expansion Cards 5. Connect Ribbon Cables, Panel W ires, and Power Supply 6. Setup the B ...

  • Asus JUMPERFREE PC133 - page 17

    ASUS CUPLE-VM User ’ s Manual 17 3. HARDW ARE SETUP 1) USB Device W ake-up (USBPWR1 / USBPWR2) Set these jumpers to +5V to allow wake up from the S1 sleep state (CPU stopped; RAM refreshed; system running in low power mode) using the connected USB devices. Set to +5VSB to allow wake up from S3 sleep state (no power to CPU; RAM in slow refresh; po ...

  • Asus JUMPERFREE PC133 - page 18

    18 ASUS CUPLE-VM User ’ s Manual 3. HARDW ARE SETUP 3.5 System Memory (DIMM) This motherboard uses o nly Dual Inline Memory Modules (DIMMs). T wo sockets are available for 3.3V olt (power level) unbuf fered Synchronous Dynamic Random Access Memory (SDRAM) of 8, 16, 32, 64, 128, 256, or 512MB to form a memory size between 8MB to 1G B. One side (wi ...

  • Asus JUMPERFREE PC133 - page 19

    ASUS CUPLE-VM User ’ s Manual 19 3. HARDW ARE SETUP System Memory 3. H/W SETUP 3.5.2 Memory Installation W ARNING! Make sure that you unplug your power supply when adding or removing memory modules or other system components. Failure to do so may cause severe damage to both your motherboard and expansion cards (see 3.3 Hardware Setup Procedure fo ...

  • Asus JUMPERFREE PC133 - page 20

    20 ASUS CUPLE-VM User ’ s Manual 3. HARDW ARE SETUP 3.6 Central Processing Unit (CPU) The motherboard comes with a ZIF Socket for the supported CPUs listed in section 2.1.1 Specifications . The following illustration shows the CPU socket location on the motherboard and the correct CPU orientation. Note in the illustration that CPUs have marks (us ...

  • Asus JUMPERFREE PC133 - page 21

    ASUS CUPLE-VM User ’ s Manual 21 3. HARDW ARE SETUP 3.6.1 CPU Installation Follow these steps to install a CPU. 1. Locate the ZIF socket on the motherboard. 2. Unlock the socket by pressing the lever sideways then lifting it up to a 90 ° -100 ° angle. 5. When the CPU is in place, press it firmly on the socket while you push down the socket leve ...

  • Asus JUMPERFREE PC133 - page 22

    22 ASUS CUPLE-VM User ’ s Manual 3. HARDW ARE SETUP 3.7 Expansion Cards In the future, you may need to install expansion cards. The motherboard has five PCI expansion slots to support these cards. Follow the steps in the next section when installing expansion cards. W ARNING! Unplug the system power cord when adding or removing expansion cards or ...

  • Asus JUMPERFREE PC133 - page 23

    ASUS CUPLE-VM User ’ s Manual 23 3. HARDW ARE SETUP 3.7.2 Assigning IRQs for Expansion Cards Some expansion cards need an IRQ to operate. Generally , an IRQ must be exclusively assigned to one use. In a standard design, there are 16 IRQs available but most of them are already in use, leaving 6 IRQs free for expansion cards. If your motherboard ha ...

  • Asus JUMPERFREE PC133 - page 24

    24 ASUS CUPLE-VM User ’ s Manual 3. HARDW ARE SETUP 3.7.4 Advanced Modem Riser (AMR) Slot This motherboard supports a specially designed audio/modem card called an AMR. Main processing is done through software and controlled by the motherboard ’ s system chipset. This provides an upgradeable audio and /or modem solution at an incredibly afforda ...

  • Asus JUMPERFREE PC133 - page 25

    ASUS CUPLE-VM User ’ s Manual 25 3. HARDW ARE SETUP Connectors 3. H/W SETUP 3.8 External Connectors W ARNING! Some pins are used for connectors or power sources. These are clearly distinguished from jumpers in the Motherboard Layout. Placing jumper caps over these connector pins will cause damage to your motherboard. IMPORT ANT : Ribbon cables sh ...

  • Asus JUMPERFREE PC133 - page 26

    26 ASUS CUPLE-VM User ’ s Manual Connectors 3. H/W SETUP 3. HARDW ARE SETUP 4) Serial Port Connectors (T eal/T ur quoise 9-pin COM1/COM2) One serial port can be used for pointing devices or other serial devices. An addi- tional serial p[ort is available using a serial port bracket. T o set up these ports, see Onboard Serial Port 1 in 4.4.2 I/O De ...

  • Asus JUMPERFREE PC133 - page 27

    ASUS CUPLE-VM User ’ s Manual 27 3. HARDW ARE SETUP Connectors 3. H/W SETUP 6) Parallel Port Connector (Burgundy 25-pin PRINTER) Y ou can enable the parallel port and choose the IRQ through Onboard Parallel Port (see 4.4.2 I/O Device Configuration) . NOTE : Serial printers must be connected to the serial port. Parallel (Printer) Port (25-pin fema ...

  • Asus JUMPERFREE PC133 - page 28

    28 ASUS CUPLE-VM User ’ s Manual Connectors 3. H/W SETUP 3. HARDW ARE SETUP 9) Primary (Blue) / Secondary IDE Connectors (40-1 pin IDE1/IDE2) These connectors support the provided UltraDMA/66 IDE hard disk ribbon cable. Connect the cable ’ s blue connector to the motherboard ’ s primary (recommended) or secondary IDE connector , and then conn ...

  • Asus JUMPERFREE PC133 - page 29

    ASUS CUPLE-VM User ’ s Manual 29 3. HARDW ARE SETUP Connectors 3. H/W SETUP 10) Floppy Disk Drive Connector (34-1 pin FLOPPY) This connector supports the provided floppy drive ribbon cable. After connecting the single end to the board, connect the two plugs on the other end to the floppy drives. (Pin 5 is removed to pr event inserting in the wron ...

  • Asus JUMPERFREE PC133 - page 30

    30 ASUS CUPLE-VM User ’ s Manual Connectors 3. H/W SETUP 3. HARDW ARE SETUP 13) W ake-On-Ring Connector ( 2 -pin W O R ) This connector connects to internal modem cards with a W ake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, W ake-On-Rin ...

  • Asus JUMPERFREE PC133 - page 31

    ASUS CUPLE-VM User ’ s Manual 31 3. HARDW ARE SETUP Connectors 3. H/W SETUP 14) CPU, Power Supply , Chassis Fan Connectors (3-pin CPU_F AN, PS_F AN, CHASS_F AN) These connectors support cooling fans of 350mA (4.2 W atts) or less. Orient the fans to blow air across the onboard heat sink. Depending on the fan manufacturer , the wiring and plug may ...

  • Asus JUMPERFREE PC133 - page 32

    32 ASUS CUPLE-VM User ’ s Manual Connectors 3. H/W SETUP 3. HARDW ARE SETUP 16) USB Header (10-1 pin USB2) If the USB port connectors on the back panel are inadequate, this USB header is available for two additional USB port connectors. Connect the USB headers to the 2-port USB connector set and mount the bracket to an open slot on your chassis. ...

  • Asus JUMPERFREE PC133 - page 33

    ASUS CUPLE-VM User ’ s Manual 33 3. HARDW ARE SETUP Connectors 3. H/W SETUP 17) A TX Power Supply Connector (20-pin block A TXPWR) This connector connects to an A TX power supply . The plug from the power sup- ply will only insert in one orientation because of the dif ferent hole sizes. Find the proper orientation and push down firmly making sure ...

  • Asus JUMPERFREE PC133 - page 34

    34 ASUS CUPLE-VM User ’ s Manual Connectors 3. H/W SETUP 3. HARDW ARE SETUP 19) System W arning Speaker Connector (4-pin SPEAKER) This 4-pin connector connects to the case-mounted speaker . T wo sources (LINE_OUT and SPEAKER) will allow you to hear system beeps and warn- ings. Only SPEAKER will allow you to hear system beeps before the integrated ...

  • Asus JUMPERFREE PC133 - page 35

    ASUS CUPLE-VM User ’ s Manual 35 3. HARDW ARE SETUP Powering Up 3. H/W SETUP 3.9 Starting Up the First T ime 1. After all connections are made, close the system case cover . 2. Be sure that all switches are off (in some systems, marked with ). 3. Connect the power supply cord into the power supply located on the back of your system case according ...

  • Asus JUMPERFREE PC133 - page 36

    ASUS CUPLE-VM User ’ s Manual 36 3. HARDW ARE SETUP Powering Up 3. H/W SETUP 7. During power -on, hold down <Delete> to enter BIOS setup. Follow the instructions in 4. BIOS SETUP . * Powering Off your computer: Y ou must first exit or shut down your operating system before switching of f the power switch. For A TX power supplies, you can pr ...

  • Asus JUMPERFREE PC133 - page 37

    4. BIOS SETUP 4.1 Managing and Updating Y our BIOS 4.1.1 Upon First Use of the Computer System It is recommended that you save a copy of the original motherboard BIOS along with a Flash Memory W riter utility (AFLASH.EXE) to a bootable floppy disk in case you need to reinstall the BIOS later . AFLASH.EXE is a Flash Memory W riter utility that updat ...

  • Asus JUMPERFREE PC133 - page 38

    ASUS CUPLE-VM User ’ s Manual 38 4. BIOS SETUP 4. BIOS SETUP Updating BIOS 5. Select 1. Save Current BIOS to File from the Main menu and press <Enter>. The Save Current BIOS T o File screen appears. 6. T ype a filename and the path, for example, A:XXX-XX.XXX and then press <Enter>. 4.1.2 Updating BIOS Procedures W ARNING! Only update ...

  • Asus JUMPERFREE PC133 - page 39

    ASUS CUPLE-VM User ’ s Manual 39 4. BIOS SETUP 4. BIOS SETUP 6. When prompted to confirm the BIOS update, press Y to start the update. 7. The utility starts to program the new BIOS information into the flash ROM. The boot block will be updated automatically only when neces- sary . This will minimize the chance that a failed update will prevent yo ...

  • Asus JUMPERFREE PC133 - page 40

    ASUS CUPLE-VM User ’ s Manual 40 4. BIOS SETUP 4. BIOS SETUP 4.2 BIOS Setup Program This motherboard supports a programmable EEPROM that can be updated using the provided utility as described in 4.1 Managing and Updating Y our BIOS . The utility is used if you are installing a motherboard, reconfiguring your system, or prompted to “ Run Setup ? ...

  • Asus JUMPERFREE PC133 - page 41

    ASUS CUPLE-VM User ’ s Manual 41 4. BIOS SETUP 4. BIOS SETUP 4.2.1 BIOS Menu Bar The top of the screen has a menu bar with the following selections: MAIN Use this menu to make changes to the basic system configuration. ADV ANCED Use this menu to enable and make changes to the advanced features. POWER Use this menu to configure and enable Power Ma ...

  • Asus JUMPERFREE PC133 - page 42

    ASUS CUPLE-VM User ’ s Manual 42 4. BIOS SETUP 4. BIOS SETUP General Help In addition to the Item Specific Help window , the BIOS setup program also pro- vides a General Help screen. This screen can be called up from any menu by sim- ply pressing <F1> or the <Alt> + <H> combination. The General Help screen lists the legend keys ...

  • Asus JUMPERFREE PC133 - page 43

    ASUS CUPLE-VM User ’ s Manual 43 4. BIOS SETUP 4. BIOS SETUP System Time [XX:XX:XX] Sets your system to the time that you specify (usually the current time). The for- mat is hour , minute, second. V alid values for hour , minute and second are Hour: (00 to 23), Minute: (00 to 59), Second: (00 to 59) . Use the <T ab> or <Shift> + <T ...

  • Asus JUMPERFREE PC133 - page 44

    ASUS CUPLE-VM User ’ s Manual 44 4. BIOS SETUP 4. BIOS SETUP NOTE: Before attempting to configure a hard disk drive, make sure you have the configuration information supplied by the manufacturer of the drive. Incor - rect settings may cause your system to not recognize the installed hard disk. T o allow the BIOS to detect the drive type automatic ...

  • Asus JUMPERFREE PC133 - page 45

    ASUS CUPLE-VM User ’ s Manual 45 4. BIOS SETUP 4. BIOS SETUP IMPORT ANT : If your hard disk was already formatted on an older previous system, incorrect parameters may be detected. Y ou will need to enter the correct parameters manually or use low-level format if you do not need the data stored on the hard disk. If the parameters listed differ fr ...

  • Asus JUMPERFREE PC133 - page 46

    ASUS CUPLE-VM User ’ s Manual 46 4. BIOS SETUP 4. BIOS SETUP Master/Slave Drives Head This field configures the number of read/write heads. Refer to your drive documen- tation to determine the correct value to enter into this field. NOTE: T o make changes to this field, the T ype field must be set to [User T ype HDD] and the T ranslation Method f ...

  • Asus JUMPERFREE PC133 - page 47

    ASUS CUPLE-VM User ’ s Manual 47 4. BIOS SETUP 4. BIOS SETUP Other options for “Type:” are: [CD-ROM] - for IDE CD-ROM drives [LS-120] - for LS-120 compatible floppy disk drives [ZIP-100] - for ZIP-100 compatible disk drives [MO] - for IDE magneto optical disk drives [Other ATAPI Device] - for IDE devices not listed here After using the legend ...

  • Asus JUMPERFREE PC133 - page 48

    ASUS CUPLE-VM User ’ s Manual 48 4. BIOS SETUP 4. BIOS SETUP Main Menu Language [English] This allows selection of the BIOS ’ displayed language. Currently only English is available. Supervisor Password [Disabled] / User Password [Disabled] These fields allow you to set the passwords. T o set the password, highlight the appro- priate field and ...

  • Asus JUMPERFREE PC133 - page 49

    ASUS CUPLE-VM User ’ s Manual 49 4. BIOS SETUP 4. BIOS SETUP 4.4 Advanced Menu Advanced Menu System/PCI Frequency [MHz] This field displays the frequency ratio between the System (Front Side Bus) and the PCI bus. The ratios displayed in this field are auto detected by the system. System/DRAM Frequency Ratio [Auto] This field of fers 3 settings fo ...

  • Asus JUMPERFREE PC133 - page 50

    ASUS CUPLE-VM User ’ s Manual 50 4. BIOS SETUP 4. BIOS SETUP Advanced Menu PS/2 Mouse Function Control [Auto] The default of [Auto] allows the system to detect a PS/2 mouse on startup. If de- tected, IRQ12 will be used for the PS/2 mouse. IRQ12 will be reserved for expan- sion cards only if a PS/2 mouse is not detected. [Enabled] will always rese ...

  • Asus JUMPERFREE PC133 - page 51

    ASUS CUPLE-VM User ’ s Manual 51 4. BIOS SETUP 4. BIOS SETUP JumperFree Mode SDRAM Configuration [By SPD] This sets the optimal timings for SDRAM related fields, depending on the memory modules that you are using. Default setting is [By SPD], which configures the sub- sequent 3 items by reading the contents in the SPD (Serial Presence Detect) dev ...

  • Asus JUMPERFREE PC133 - page 52

    ASUS CUPLE-VM User ’ s Manual 52 4. BIOS SETUP 4. BIOS SETUP SDRAM Active to Precharge Time NOTE: This field will only be adjustable when SDRAM Configuration is set to [User Define]. Bank Interleave [Enabled] Configuration options: [Enabled] [Disabled] FSB Acceleration Time [Disabled] Configuration options: [Enabled] [Disabled] Read Around Write ...

  • Asus JUMPERFREE PC133 - page 53

    ASUS CUPLE-VM User ’ s Manual 53 4. BIOS SETUP 4. BIOS SETUP Chip Configuration Onboard PCI Audio Enable [Enabled] This field appears only if the Creative Audio Controller is available. Configuration options: [Enabled] [Disabled] Memory Hole At 15M-16M [Disabled] Configuration options: [Enabled] [Disabled] ...

  • Asus JUMPERFREE PC133 - page 54

    ASUS CUPLE-VM User ’ s Manual 54 4. BIOS SETUP 4. BIOS SETUP Onboard FDC Swap A & B [No Swap] This field allows you to reverse the hardware drive letter assignments of your floppy disk drives. Configuration options: [No Swap] [Swap AB] Floppy Disk Access Control [R/W] When set to [Read Only], this field protects files from being copied to flo ...

  • Asus JUMPERFREE PC133 - page 55

    ASUS CUPLE-VM User ’ s Manual 55 4. BIOS SETUP 4. BIOS SETUP I/O Device Config Onboard Parallel Port [378H/IRQ7] This field sets the address of the onboard parallel port connector . If you disable this feature, Parallel Port Mode and ECP DMA Select configurations will not be avail- able. Configuration options: [Disabled] [378H/IRQ7] [278H/IRQ5] P ...

  • Asus JUMPERFREE PC133 - page 56

    ASUS CUPLE-VM User ’ s Manual 56 4. BIOS SETUP 4. BIOS SETUP I/O Device Config Onboard Peripheral Resource Control Onboard AC97 Modem Controller [Auto] Onboard AC97 Audio Controller [Auto] [Auto] allows the motherboard ’ s BIOS to detect whether you are using any net- work/audio device. If a network/audio device is detected, the onboard network ...

  • Asus JUMPERFREE PC133 - page 57

    ASUS CUPLE-VM User ’ s Manual 57 4. BIOS SETUP 4. BIOS SETUP I/O Device Config Sound Blaster Emulation [Disabled] Select [Enabled] for this field if you want to use the Sound Blaster ™ emulation feature. Sound Blaster I/O Base Address [220h-22Fh] Sound Blaster IRQ [IRQ5] Sound Blaster DMA [DMA 1] These fields set the I/O address, IRQ, and DMA c ...

  • Asus JUMPERFREE PC133 - page 58

    ASUS CUPLE-VM User ’ s Manual 58 4. BIOS SETUP 4. BIOS SETUP PCI Configuration Slot 1, Slot 2, Slot 3 Slot 4 IRQ [Auto] These fields set how IRQ use is determined for each PCI slot. The default setting for each field is [Auto], which utilizes auto-routing to determine IRQ use. Con- figuration options: [Auto] [NA] [3] [4] [5] [7] [9] [10] [1 1] [1 ...

  • Asus JUMPERFREE PC133 - page 59

    ASUS CUPLE-VM User ’ s Manual 59 4. BIOS SETUP 4. BIOS SETUP PCI Configuration USB Function [Enabled] This motherboard supports Universal Serial Bus (USB) devices. Set to [Enabled] if you want to use USB devices. Configuration options: [Disabled] [Enabled] Primary VGA BIOS [PCI Card] If your computer has a PCI VGA card and on-board VGA is availab ...

  • Asus JUMPERFREE PC133 - page 60

    ASUS CUPLE-VM User ’ s Manual 60 4. BIOS SETUP 4. BIOS SETUP PCI Configuration DMA x Reserved for Legacy Device [No/ICU] These fields indicate whether or not the displayed DMA channel for each field is being used by an onboard legacy (non-PnP) device. The default setting indicates either that the displayed DMA channel is not used or an ICU is bei ...

  • Asus JUMPERFREE PC133 - page 61

    ASUS CUPLE-VM User ’ s Manual 61 4. BIOS SETUP 4. BIOS SETUP PCI Configuration Reserved MEM Block BASE [No/ICU] This field allows you to set the base address and block size of an onboard legacy ISA device that uses any memory segment within the C800 and DFFF address range. If you have such a device and you are not using an ICU to specify its addr ...

  • Asus JUMPERFREE PC133 - page 62

    ASUS CUPLE-VM User ’ s Manual 62 4. BIOS SETUP 4. BIOS SETUP Shadow Configuration Video ROM BIOS Shadow [Enabled] This field allows you to change the video BIOS location from ROM to RAM. Relo- cating to RAM enhances system performance, as information access is faster than the ROM. Configuration options: [Disabled] [Enabled] C8000-DFFFF Shadow [Di ...

  • Asus JUMPERFREE PC133 - page 63

    ASUS CUPLE-VM User ’ s Manual 63 4. BIOS SETUP 4. BIOS SETUP Power Menu 4.5 Power Menu The Power menu allows you to reduce power consumption. This feature turns of f the video display and shuts down the hard disk after a period of inactivity . Power Management [User Define] This option must be enabled to use any of the automatic power saving feat ...

  • Asus JUMPERFREE PC133 - page 64

    ASUS CUPLE-VM User ’ s Manual 64 4. BIOS SETUP 4. BIOS SETUP Power Menu Video Off Option [Suspend -> Off ] This field determines when to activate the video of f feature for monitor power man- agement. Configuration options: [Always On] [Suspend -> Of f] Video Off Method [DPMS OFF] This field defines the video off features. The DPMS (Display ...

  • Asus JUMPERFREE PC133 - page 65

    ASUS CUPLE-VM User ’ s Manual 65 4. BIOS SETUP 4. BIOS SETUP Power Up Control AC PWR Loss Restart [Disabled] This allows you to set whether you want your system to reboot after the power has been interrupted. [Disabled] leaves your system of f and [Enabled] reboots your sys- tem. [Previous State] sets your system back to the state it is before th ...

  • Asus JUMPERFREE PC133 - page 66

    ASUS CUPLE-VM User ’ s Manual 66 4. BIOS SETUP 4. BIOS SETUP Power Up Control Automatic Power Up [Disabled] This allows an unattended or automatic system power up. Y ou may configure your system to power up at a certain time of the day by selecting [Everyday] or at a certain time and day by selecting [By Date]. NOTE: Automatic Power Up will not w ...

  • Asus JUMPERFREE PC133 - page 67

    ASUS CUPLE-VM User ’ s Manual 67 4. BIOS SETUP 4. BIOS SETUP Hardware Monitor 4.5.2 Hardware Monitor MB Temperature [xxxC/xxxF] CPU Temperature [xxxC/xxxF] The onboard hardware monitor is able to detect the MB (motherboard) and CPU temperatures. Set to [Ignore] only if necessary . CPU Fan Speed [xxxxRPM] Chassis Fan Speed [xxxxRPM] The onboard ha ...

  • Asus JUMPERFREE PC133 - page 68

    ASUS CUPLE-VM User ’ s Manual 68 4. BIOS SETUP 4. BIOS SETUP Boot Menu Boot Sequence The Boot menu allows you to select among the four possible types of boot devices listed using the up and down arrow keys. By using the <+> or <Space> key , you can promote devices and by using the <-> key , you can demote devices. Promotion or d ...

  • Asus JUMPERFREE PC133 - page 69

    ASUS CUPLE-VM User ’ s Manual 69 4. BIOS SETUP 4. BIOS SETUP Boot Menu Other Boot Device Select [INT18 Device (Network)] Configuration options: [Disabled] [SCSI/Onboard A T A Boot Device] [INT18 De- vice (Network)] [LANDesk (R) Service Agent] Plug & Play O/S [No] This field allows you to use a Plug-and-Play (PnP) operating system to configure ...

  • Asus JUMPERFREE PC133 - page 70

    ASUS CUPLE-VM User ’ s Manual 70 4. BIOS SETUP 4. BIOS SETUP Exit Menu Exit Saving Changes Once you are finished making your selections, choose this option from the Exit menu to ensure the values you selected are saved to the CMOS RAM. The CMOS RAM is sustained by an onboard backup battery and stays on even when the PC is turned off. Once this op ...

  • Asus JUMPERFREE PC133 - page 71

    ASUS CUPLE-VM User ’ s Manual 71 4. BIOS SETUP 4. BIOS SETUP Load Setup Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When this option is selected or if <F5> is pressed, a confirmation is requested. Select [Y es] to load default values. Y ou can now select Exit Saving Changes or ma ...

  • Asus JUMPERFREE PC133 - page 72

    ASUS CUPLE-VM User ’ s Manual 72 4. BIOS SETUP 4. BIOS SETUP (This page intentionally left blank.) ...

  • Asus JUMPERFREE PC133 - page 73

    73 ASUS CUPLE-VM User ’ s Manual 5. S/W SETUP Windows 98 5. SOFTW ARE SETUP 5.1 Install Operating System Y ou should always use the latest operating system and updates when using new hardware to ensure full compliancy . Y ou may use any version of W indows 98/2000/ Millenium, but for W indows 95, you must use OSR 2.0 or later . For W indows NT 4. ...

  • Asus JUMPERFREE PC133 - page 74

    74 5. SOFTW ARE SETUP ASUS CUPLE-VM User ’ s Manual 5. S/W SETUP Windows 98 5. 3 CUPLE-VM Series Support CD NOTE: The support CD contents are subject to change at any time without notice. T o begin using your support CD disc, just insert it into your CD-ROM drive and the support CD installation menu should appear . If the menu does not appear , d ...

  • Asus JUMPERFREE PC133 - page 75

    ASUS CUPLE-VM User ’ s Manual 75 6. S/W REFERENCE ASUS PC Probe 6.1 ASUS PC Probe ASUS PC Probe is a convenient utility to continuously monitor your com- puter system ’ s vital components, such as fan rotations, voltages, and tem- peratures. It also has a utility that lets you review useful information about your computer , such as hard disk sp ...

  • Asus JUMPERFREE PC133 - page 76

    ASUS CUPLE-VM User ’ s Manual 76 6. SOFTW ARE REFERENCE 6. S/W REFERENCE ASUS PC Probe 6.1.2 Using ASUS PC Probe Monitoring Monitor Summary Shows a summary of the items being monitored. T emperature Monitor Shows the PC ’ s temperature (for supported processors only). T emperature W arning threshold adjustment (Move the slider up to increase th ...

  • Asus JUMPERFREE PC133 - page 77

    ASUS CUPLE-VM User ’ s Manual 77 6. SOFTW ARE REFERENCE 6. S/W REFERENCE ASUS PC Probe Settings Lets you set threshold levels and poll- ing intervals or refresh times of the PC ’ s temperature, fan rotation, and voltages. History Lets you record the monitoring activ- ity of a certain component of your PC for future reference. Information Hard D ...

  • Asus JUMPERFREE PC133 - page 78

    ASUS CUPLE-VM User ’ s Manual 78 6. SOFTW ARE REFERENCE Device Summary Shows a summary of devices in your PC. DMI Explor er Shows information pertinent to the PC, such as CPU type, CPU speed, and in- ternal/external frequencies, and memory size. Utility Lets you run programs outside of the ASUS Probe modules. T o run a program, click Execute Prog ...

  • Asus JUMPERFREE PC133 - page 79

    ASUS CUPLE-VM User ’ s Manual 79 6. SOFTW ARE REFERENCE 6.1.3 ASUS PC Probe T ask Bar Icon Right clicking the PC Probe icon will bring up a menu to open o r exit ASUS PC Probe and pause or resume all sys- tem monitoring. When the ASUS PC Probe senses a p robl em with your PC, portions of the ASUS PC Probe icon changes to red, the PC speaker beeps ...

  • Asus JUMPERFREE PC133 - page 80

    ASUS CUPLE-VM User ’ s Manual 80 6. SOFTW ARE REFERENCE 6. S/W REFERENCE PowerPlayer 6.2 CyberLink PowerPlayer SE CyberLink PowerPlayer SE is an intelligent software player that can automatically detect and playback all kinds of video/audio files, CD and MP3 files as well. This is the only software you need for all types of video and audio files. ...

  • Asus JUMPERFREE PC133 - page 81

    ASUS CUPLE-VM User ’ s Manual 81 6. SOFTW ARE REFERENCE 6. S/W REFERENCE PowerDVD 6.3 CyberLink PowerDVD CyberLink PowerDVD is the flagship of CyberLink ’ s complete range of video and audio software products. It features unrivaled functions allowing users to view high quality video and media-rich DVD contents on the personal computer . W ith t ...

  • Asus JUMPERFREE PC133 - page 82

    ASUS CUPLE-VM User ’ s Manual 82 6. SOFTW ARE REFERENCE 6. S/W REFERENCE VideoLive Mail 6.4 CyberLink V ideoLive Mail CyberLink ’ s V ideoLive Mail Plus V er 3.0 (a.k.a. VLM 3) is a convenient and excel- lent way to create professional quality video mails from PC video/audio input de- vices and to send the mails to any recipients via VLM 3 ’ ...

  • Asus JUMPERFREE PC133 - page 83

    ASUS CUPLE-VM User ’ s Manual 83 6. SOFTW ARE REFERENCE 6. S/W REFERENCE VideoLive Mail 6.4.2 CyberLink VideoLive Mail User Interface 6.4.1 Starting V ideoLive Mail T o start V ideoLive Mail , click the W indows Start button, point to Pr ograms , and then CyberLink V ideoLive Mail , and then click V ideoLive Mail x.x . VLM 3 ’ s Setup W izard w ...

  • Asus JUMPERFREE PC133 - page 84

    ASUS CUPLE-VM User ’ s Manual 84 6. SOFTW ARE REFERENCE 6. S/W REFERENCE 6.5 ASUS Update ASUS LiveUpdate is a utility that allows you to update your motherboard ’ s BIOS and drivers. The use of this utility requires that you are properly con- nected to the Internet through an I nternet S ervice P rovider (ISP). 1. Start ASUS Update Launch the u ...

  • Asus JUMPERFREE PC133 - page 85

    ASUS CUPLE-VM User ’ s Manual 85 7 . APPENDIX Glossary 7. APPENDIX 7.1 Glossary 1394 1394 is the IEEE designation for the high performance serial bus at 12.5, 25 or 50MBytes/sec speeds. This serial bus defines both a back plane physical layer and a point-to-point cable-connected virtual bus. The primary application of the cable ver- sion is the i ...

  • Asus JUMPERFREE PC133 - page 86

    ASUS CUPLE-VM User ’ s Manual 86 7. APPENDIX 7. APPENDIX Glossary Boot Boot means to start the computer operating system by loading it into system memory . When the manual instructs you to “ boot ” your system (or computer), it means to turn ON your computer . “ Reboot ” means to restart your computer . When using W in- dows 95 or later , ...

  • Asus JUMPERFREE PC133 - page 87

    ASUS CUPLE-VM User ’ s Manual 87 7 . APPENDIX Glossary 7. APPENDIX LPT Port (Line Printer Port) Logical device name reserved by DOS for the computer parallel ports. Each LPT port is configured to use a dif ferent IRQ and address assignment. MMX A set of 57 new instructions based on a technique called Single Instruction, Multiple Data (SIMD), whic ...

  • Asus JUMPERFREE PC133 - page 88

    ASUS CUPLE-VM User ’ s Manual 88 7. APPENDIX 7. APPENDIX Glossary ROM (Read Only Memory) ROM is nonvolatile memory used to store permanent programs (called firmware) used in certain computer components. Flash ROM (or EEPROM) can be repro- grammed with new programs (or BIOS). SCSI (Small Computer System Interface) High speed multi-threaded I/O int ...

  • Asus JUMPERFREE PC133 - page 89

    ASUS CUPLE-VM User ’ s Manual 89 INDEX A AC PWR Loss Restart 65 Accelerated Graphics Port AGP Pro Slot 24 ASUS PC Probe Using 75 ASUS Update Using 84 A T API CD-ROM 68 A TX Power Supply Connector 33 Audio CODEC Setting 17 Audio Controller 56 Audio Port Connectors 27 B BIOS Beep Code 35 BIOS Beep Codes 35 Boot Sequence 68 Boot Up Floppy Seek 69 Bo ...

  • Asus JUMPERFREE PC133 - page 90

    90 CUPLE-VM User ’ s Manual H Halt On 48 Hardware Setup Memory Installation 19 HDD Power Down 64 Head 46 Headers USB 15, 32 I IDE Activity LED Lead 33 IDE Connectors 28 IDE Hard Drive 68 Infrared Module Connector 29 Installed Memory 48 Internal Audio Connector 32 Interrupt Request (IRQ) Standard Assignments 23 IRQ XX Used By ISA 59 ISA MEM Block ...

  • Asus JUMPERFREE PC133 - page 91

    ASUS CUPLE-VM User ’ s Manual 91 Q Quick Power On Self T est 69 R Removable Device 68 S Save Changes 71 SDRAM CAS Latency 51 SDRAM RAS Precharge T ime 51 Sector 46 Serial Port Connectors 26 Settings 17 Audio CODEC 17 USB Device W ake-up 17 SMAR T Monitoring 46 SoundBlaster Mixer 85 Using 85 Starting Up 35 Supervisor Password 48 Suspend Mode 64 Su ...

  • Asus JUMPERFREE PC133 - page 92

    92 CUPLE-VM User ’ s Manual NOTES ...

Produzent Asus Kategorie Fitness Equipment

Dokumente, die wir vom Produzenten des Geräts Asus JUMPERFREE PC133 erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Asus
- Bedienungsanleitungen JUMPERFREE PC133
- Produktkarten Asus
- Informationsbroschüren
- oder Energieetiketten Asus JUMPERFREE PC133
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Asus JUMPERFREE PC133.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Asus JUMPERFREE PC133, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Asus JUMPERFREE PC133. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Asus JUMPERFREE PC133 ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts Asus JUMPERFREE PC133, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Asus JUMPERFREE PC133 hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Asus JUMPERFREE PC133 verständlich ist.

Eine gänzliche Bedienungsanleitung von Asus sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Asus JUMPERFREE PC133 bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Asus JUMPERFREE PC133 befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Asus JUMPERFREE PC133, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Asus JUMPERFREE PC133 - die uns die ersten Schritte während der Nutzung von Asus JUMPERFREE PC133 erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Asus JUMPERFREE PC133 hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Asus JUMPERFREE PC133 im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Asus JUMPERFREE PC133?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Asus JUMPERFREE PC133 nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Asus JUMPERFREE PC133 hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)