Manual de instrucciones Ubiquiti Networks BM2-TI

24 de páginas No relevante
Descargar

Pasar a la página of 24

Summary
  • Ubiquiti Networks BM2-TI - page 1

    Zero-V ariable Outdoor Radio Models: BM2-Ti, BM5-Ti ...

  • Ubiquiti Networks BM2-TI - page 2

    Introduction Thank you for purchasing the Ubiquiti Netw orks ™ airMAX ™ Bullet ™ Titanium. This Quick Start Guide is designed to guide you through the installation of the radio . This Quick Star t Guide also includes the warranty terms and is for use with the BulletM2 Titanium, model BM2-Ti, and the BulletM5Titanium, model BM5-Ti. Package ...

  • Ubiquiti Networks BM2-TI - page 3

    Hardware Overview N-Type Connector Bullet Titanium Radio Rubber Washer Cable Gland Body Compression Nut Ethernet Port Compression Seal ...

  • Ubiquiti Networks BM2-TI - page 4

    Hardware Installation 1. Unscrew the Cable Gland Body and detach it from the Bullet Titanium Radio. 2. Unscrew the Compression Nut and remove the C ompression Seal from the Cable Gland Body. ...

  • Ubiquiti Networks BM2-TI - page 5

    3. Slide the Compression Nut over the Ethernet cable with the threaded end facing the RJ-45 connector . Slip the Compression Seal around the cable. 4. Feed the Ethernet cable thr ough the Cable Gland Body and seat the Compression Seal into the Cable Gland Body . 5. Connect the Ethernet cable to the port located on the bottom of the Bullet Titanium ...

  • Ubiquiti Networks BM2-TI - page 6

    6. Securely screw the Cable Gland Body into the Bullet Titanium Radio so that the Rubber Washer seals the bottom of the radio. 7. Tightly screw on the Compression Nut. Ensure the Compression Seal is securely compressed and tightly sealed around the cable. ...

  • Ubiquiti Networks BM2-TI - page 7

    8. Connect the Bullet Titanium to the N-T ype connec tor of the antenna. Note: The Bullet Titanium should be mounted vertically to reduce stress on the N-T ype Connector. The N-Type Right Angle Adapter may be used as needed. ...

  • Ubiquiti Networks BM2-TI - page 8

    Connecting Po wer over Ethernet 1. Connect the other end of the Ethernet cable from the Bullet Titanium to the Ethernet port labeled POE on the PoE Adapter . 2. Connect an Ethernet cable from your LAN to the Ethernet port labeled LAN on the PoE Adapter. 3. Connect the power cord to the pow er por t on the PoE Adapter . Connect the other end of the ...

  • Ubiquiti Networks BM2-TI - page 9

    Accessing the airOS Utility 1. Make sure that your host machine is connected to the LAN that is connected to the Bullet Titanium. 2. Configure the Ethernet adapter on your host syst em with a static IP address on the 192.168.1.x subnet. 3. Launch your web browser . T ype https://192.168.1.20 in the address field and press enter (PC) or return (Mac) ...

  • Ubiquiti Networks BM2-TI - page 10

    Installer Compliance Responsibility Devices must be professionally installed and it is the professional installer’ s responsibility to make sure the device is operated within local country regulatory requirements. Since Ubiquiti Networks equipment can be paired with a variety of antennas and cables, the Antenna Gain , Cable Loss , and Output Powe ...

  • Ubiquiti Networks BM2-TI - page 11

    Specifications Bullet Titanium Processor Atheros MIPS 24KC, 400 MHz Memory 32 MB SDRAM, 8 MB Flash Networking Interface (1) 10/100 Ethernet Port Dimensions 190 x 46 mm Weight 196 g Enclosure Powder C oated Aluminum Antenna Connector N-Type C onnec tor Operating Frequency BM2-Ti BM5-Ti 2402 - 2462 MHz Worldwide: 5170 - 5875 MHz USA: 5725 - 5850 MHz ...

  • Ubiquiti Networks BM2-TI - page 12

    Safety Notices 1. Read, follow , and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer . W ARNING: Do not use this product in location that can be submerged by water . W ARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightn ...

  • Ubiquiti Networks BM2-TI - page 13

    Limited W arranty UBIQUITI NETWORKS, Inc (“UBIQUITI NET WORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation. UBIQUITI NETWORKS’ sole and exclusive obligat ...

  • Ubiquiti Networks BM2-TI - page 14

    Returns No Products will be accepted for replacement or r epair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being receiv ed at UBIQUITI NETWORKS’ facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS. Products returned without an RMA ...

  • Ubiquiti Networks BM2-TI - page 15

    Limitation of Liability EXCEPT T O THE EXTENT PROHIBITED BY LOCAL LA W, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIA TES OR SUPPLIERS BE LIABLE FOR DIRECT , SPECIAL, INCIDENTAL, C ONSEQUENTIAL OR OTHER DAMAGES (INCLUDING L OST PROFIT, L OST DA T A, OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESUL TS OF USE OF THE ...

  • Ubiquiti Networks BM2-TI - page 16

    Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment. This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must acce ...

  • Ubiquiti Networks BM2-TI - page 17

    Industry Canada This Class A digital apparatus complies with Canadian ICES-003. T o reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r .p.) is not more than that permitted for succ essful communication. This device complies with Industry Canad ...

  • Ubiquiti Networks BM2-TI - page 18

    Cet appareil numérique de la classe A est confrome à la norme NMB-003 Canada. Pour réduire le risque d’interférence aux autres utilisateurs, le type d’antenne et son gain doivent être choisies de façon que la puissance isotrope rayonnée équivalent e (PIRE) ne dépasse pas ce qui est nécessaire pour une communication réussie. Cet appar ...

  • Ubiquiti Networks BM2-TI - page 19

    RF Exposure W arning The antennas used for this transmitter must be installed to pro vide a separation distance of at least 2.52 m from all persons and must not be located or operating in conjunction with any other antenna or transmitter . Les antennes utilisées pour ce transmetteur doiv ent être installé en considérant une distance de séparat ...

  • Ubiquiti Networks BM2-TI - page 20

    RoHS/WEEE Compliance Statement English European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dis ...

  • Ubiquiti Networks BM2-TI - page 21

    Español La Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación. Es responsabil ...

  • Ubiquiti Networks BM2-TI - page 22

    Declaration of Conformity Česky [Czech] UBIQUITI NET WORKS tímto prohla uje, e tent o UBIQUITI NE TWORKS device, je ve shod se základními po adavky a dal ími p íslu n mi ustanoveními sm rnice 1999/5/ES. Dansk [Danish] Undertegnede UBIQUITI NET WORKS erklærer herved, at følgende udstyr UBIQUITI NET WORKS device, overholder de væsentlige kr ...

  • Ubiquiti Networks BM2-TI - page 23

    Italiano [Italian] Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NET WORKS device, è conforme ai requisiti essenziali ed alle altr e disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latviski [Latvian] Ar o UBIQUITI NETWORKS dek lar , ka UBIQUITI NET WORKS device, atbilst Direkt vas 1999/5/EK b tiskaj m pras b m un citi ...

  • Ubiquiti Networks BM2-TI - page 24

    P051713—720-00034-01 www .ubnt.com © 2011-2013 Ubiquiti Networks, Inc. All rights reserved. ...

Fabricante Ubiquiti Networks Categoría Access Point

Los documentos del dispositivo Ubiquiti Networks BM2-TI que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Ubiquiti Networks
- manuales de instrucciones BM2-TI
- hojas de producto Ubiquiti Networks
- folletos informativos
- o etiquetas energéticas Ubiquiti Networks BM2-TI
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Ubiquiti Networks BM2-TI.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Ubiquiti Networks BM2-TI, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Ubiquiti Networks BM2-TI. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Ubiquiti Networks BM2-TI.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Ubiquiti Networks BM2-TI, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Ubiquiti Networks BM2-TI. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Ubiquiti Networks BM2-TI.

El manual de instrucciones completo de Ubiquiti Networks debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Ubiquiti Networks BM2-TI - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Ubiquiti Networks BM2-TI, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Ubiquiti Networks BM2-TI que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Ubiquiti Networks BM2-TI - que deben facilitarnos los primeros pasos durante el uso de Ubiquiti Networks BM2-TI
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Ubiquiti Networks BM2-TI
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Ubiquiti Networks BM2-TI en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Ubiquiti Networks BM2-TI?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Ubiquiti Networks BM2-TI, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Ubiquiti Networks BM2-TI probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Comentarios (0)