-
Beko DWD 8657 - page 1
...
-
Beko DWD 8657 - page 2
...
-
Beko DWD 8657 - page 3
contents 3 Introduction Welcome 2 Know your dishwasher / specification 4 Standards and testing information / EC declaration of conformity 4 Warning and safety information 5 Electrical Safety 5 Childrens safety 5 General 5 Recycling 6 Energy and water saving 6 What should not be washed in your dishwasher 6 Before first use 6 Turbo Fan Heat Drying ...
-
Beko DWD 8657 - page 4
4 73/23/EC 89/336/EC 93/68/EC IEC 436/DIN 44990 EN 50242 This appliance has been designed, constructed and distributed in compliance with the safety requirements of EC directives. Load capacity : 12 place settings. Upper basket Dishwasher salt cap Lower basket Cutlery basket Detergent and Rinse aid dispenser Upper spray arm Lower spray arm Filters ...
-
Beko DWD 8657 - page 5
The dishwasher should only be operated on the voltage specified. For electrical safety, only earthed plugs and sockets should be used. Always use the fused plug provided with the appliance. The user is responsible for meeting these basic safety requirements. The life of your machine and your safety depend on you using an electrical installation com ...
-
Beko DWD 8657 - page 6
Turbo Fan Heat Drying System ensures your dishes are dried efficiently. ! During operation you may hear noises which is normal. Please help us to protect our environment. Packing materials and some parts of your machine are produced using recyclable materials. These materials are marked up with recycling symbol and material type information (>PE ...
-
Beko DWD 8657 - page 7
7 When deciding on where to install your new dishwasher, ensure that the position of your dishwasher makes it easy and quick for you to place the dishes in the dishwasher and also to take them out and store away after the dishwashing is completed. Avoid placing the dishwasher where the ambient temperature is likely to fall below. 0 degrees C. (32° ...
-
Beko DWD 8657 - page 8
Make sure your plumbing is suitable to install your new dishwasher. If in doubt contact a qualified plumber. The appliance must be connected to the water mains using the new hose set supplied with your new dishwasher . Old hose sets must not be re -used. The water pressure coming from the water mains supply must be a minimum of 0.3 and a maximum of ...
-
Beko DWD 8657 - page 9
Remove all packaging before positioning the machine. See the following diagram. Ensure there is a clearance each side of the machine to allow slight side ways movement for servicing. Work top of your dishwasher is removable if required. Height without the work top is 820 mm. By removing the machines worktop, you can install it under a close fitt ...
-
Beko DWD 8657 - page 10
10 Dishwashers require fairly soft water. If the hardness exceeds 6°dH lime scale will form on crockery. To avoid this an automatic system adds a special salt to soften the water so that you obtain the best possible cleaning and drying performance. To find out the hardness level of your water contact your local water company, or use the enclosed t ...
-
Beko DWD 8657 - page 11
11 S A L Z T U Z S A L T S E L Funnel Only use special pelletized dishwasher salt in your machine to soften the hard water. Never use other types of salts including table salt, animal feeding salt, sea salt, culinary salt. These types of salt do not dissolve in water easily and will damage your appliance beyond repair. When you run the dishwasher, ...
-
Beko DWD 8657 - page 12
Any brand of powder, gel and tablet detergents that have been designed for household dishwasher, may be used. Keep detergents in a cool and dry place and out of the reach of children. Detergent must be added to the container before each use. Detergent overdose may cause scratches on your dishes and there may be traces of detergent left in your mach ...
-
Beko DWD 8657 - page 13
Use only rinse aid intended for household dishwashers. The rinse aid is specially formulated to be used in the dishwashers for the prevention of watermarks and scale on dishes and to increase the efficiency of the washing and drying processes. Therefore, make sure that there is adequate amount of rinse aid in the rinse aid dispenser of your machine ...
-
Beko DWD 8657 - page 14
Loading the dishwasher correctly will increase the washing, drying and energy performance of your machine. Examine the information given in this section and the information stated in the Programme chart and quick reference card given with the manual. Remove any large scraps of food from the dishes before placing in the dishwasher to avoid clogging ...
-
Beko DWD 8657 - page 15
Warning ! Long cutlery, such as ladles and long knives, etc must be placed horizontally on top of the full cutlery basket or on the racks to prevent accidental injury. Handle of the cutlery basket is not removable Place larger items such as saucepans in the lower basket. You can remove the cutlery basket to make room for other items .Place spoons a ...
-
Beko DWD 8657 - page 16
16 Standard Loading and Testing Institute Information Lower and upper baskets: Standard 12 place settings 5+25 gr. as compliant to EN 50242-DIN 44990.I EC436 international norms Economy 50°C as compliant to EN 50242 international norms 8 7 6 5 4 3 2 1 7 3 1 6 3 2 2 3 1 2 1 3 8 2 2 3 2 1 3 3 1 2 2 1 3 3 2 2 2 2 3 1 3 1 3 7 4 4 4 4 5 5 5 5 5 5 1 1 4 ...
-
Beko DWD 8657 - page 17
17 Operating Your Dishwasher Half load button On/Off button (+) Button Start / Pause / Cancel button Start / Pause / Cancel indicator light Handle Programme selection button Display (-) Button Extra drying button Time display - Program and delay Salt indicator Time delay active indicator Half / Load active indicator Rinse agent indicator Child lock ...
-
Beko DWD 8657 - page 18
18 Function buttons On/Off Button ( 8 ) Use this button to turn your dishwasher on and off. When switching on the dishwasher, the last programme selected is shown in the display. If any additional function (such as half load) is chosen during the last program they will remain active after switching the dishwasher off and on. Start / Pause / Cancel ...
-
Beko DWD 8657 - page 19
19 · Turn on the water tap and plug in the appliance. · Open the door and load the dishwasher. Check that both the upper and lower sprayer arms can move freely. · Add the appropriate amount of detergent to the dispenser and close the door. · Use the On/Off button to switch the appliance on. · Check the control indicators for salt ( 17 ) and ri ...
-
Beko DWD 8657 - page 20
20 Press Start / Pause / Cancel button first to switch your machine into pause mode if you want to make any changes in the program or function while the Delay function is on. You will observe that the countdown is paused. Select programs and/or add functions you desire. Resume the delay phase and the countdown from the point they were paused, by pr ...
-
Beko DWD 8657 - page 21
21 Programme Progress Display You can follow the step which the program is in from the program follow-up display ( 10 ) on the screen. This display includes the following steps: ( 10 a ) Washing ( 10 b ) Rinsing ( 10 c ) Drying ( 10 d ) End Indicators for washing, rinsing and drying steps light respectively on the program follow-up screen while the ...
-
Beko DWD 8657 - page 22
22 The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions. * The consumption figures and duration of the programs marked with (-) are not effected by the selectýon of extra drying functýon. ** Reference programme for testing institutes The tests in accordance ...
-
Beko DWD 8657 - page 23
Cleaning your machine at regular intervals ensures longer product life and reduces the risk of recurring problems. Clean spray arms and in particular filters at least once a week ! Always unplug the appliance and turn off the water supply before cleaning. To clean the outside of the appliance and the door seal, use a neutral detergent and a damp cl ...
-
Beko DWD 8657 - page 24
For the efficient operation of your dishwasher, check the filters and the spray arms regularly. There are three different filters in your machine Main filter Coarse filter Micro filter To remove the coarse and micro filter assembly to clean, turn it anti clockwise as far as it goes and lift it up. Then press the two tongues in wards and pull out th ...
-
Beko DWD 8657 - page 25
25 Spotting / filming / poor cleaning results Small particles (food or detergent) left on items Increase the amount of detergent, especially when washing full loads, or in hard water. Increase water softener dosage. Use additional detergent, increase rinse agent dosage. Check the nozzle holes in the spray arms. They may be blocked with a soil parti ...
-
Beko DWD 8657 - page 26
26 TROUBLE SHOOTING GUIDE POSSIBLE CAUSES SOLUTIONS SYMPTOMS Pitting of stainless steel items Dishes not dry Scratches on glassware Prolonged contact with salty or highly acidic foods or with undissolved or highly concentrated detergent. Remove spots with silver polish. Rewash. Wash soon after use, or pre-wash items if they will not be washed right ...
¿Tienes una pregunta acerca de Beko DWD 8657?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Beko DWD 8657, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Beko DWD 8657 probablemente compartirá una forma de solucionarlo.