-
Clarion CJ-981E - page 1
2 CJ-981E All Rights Reserved. Copyright © 2005: Clarion Co., Ltd. Printed in Japan / Imprimé au Japon / Gedruckt in Japan / Stampato in Giappone Clarion Co., Ltd. CJ-981E 280-8293-00 2005/7 (A·K) Be sure to unfold and read the next page. Veuillez déplier et vous référer à la page suivante. Bitte ausbreiten und die nächste Seite lesen. Assi ...
-
Clarion CJ-981E - page 2
CJ-981E 61 3 CJ-981E 4 CJ-981E Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter . Remarque: Veuillez d é plier cette page et vous r é f é rer aux sch é mas quand vous lisez chaque chapitre. Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten. Nota: Assic ...
-
Clarion CJ-981E - page 3
CJ-981E 5 English 3. PRECAUTIONS CAUTION • The rear-view monitor image has the same right-left inversion as your vehicle’s rear- view mirrors. Depending on the vehicle, the field and angle of view may differ . • Do not attempt to use this device for applications other those for which it was designed. Electrical shock or other injury may resul ...
-
Clarion CJ-981E - page 4
6 CJ-981E English ■ Care of the Enclosure Remove dust with a soft, dry cloth. In event of severe soiling, dip a soft cloth in a diluted detergent solution and wipe the unit, finishing by drying with a soft dry cloth. Note: • Do not use chemically impregnated cleaning cloths or solutions meant for automobile interiors, since they may cause defor ...
-
Clarion CJ-981E - page 5
CJ-981E 7 English 4. OPERA TIONS Adjusting the Image Quality The CJ-981E is equipped with functions to allow adjustment of luminance (BRIGHT), color tone (HUE), color saturation (COLOR), and screen brightness (DIMMER) in each of the screen modes, thus letting you view the image under optimum conditions. ∗ In “ RGB ” mode, only luminance (BRIG ...
-
Clarion CJ-981E - page 6
8 CJ-981E English T o Display Onscrren Scale Markers (MARKER) ∗ Default value is “ OFF ” (no markers displayed) Setting the Marker Pattern (MARKER SELECT) Notes: • Different camera types produce different patterns of scale marker . Be sure to set the camera function ( CAM TYPE ) before setting the markers in this section ( MARKER SELECT ). ...
-
Clarion CJ-981E - page 7
CJ-981E 9 English MARKER SELECT P7 MARKER SELECT P1 MARKER SELECT P3 MARKER SELECT P6 MARKER SELECT P2 MARKER SELECT P7 MARKER SELECT P1 MARKER SELECT P1 5. Press the [ MODE ] button to return to the “ CAM ” mode screen. Adjusting the Bumper Position (MARKER ADJUST) The display position of the scale markers set on the screen can be adjusted to ...
-
Clarion CJ-981E - page 8
10 CJ-981E English Setting the Screen Saver TIMER Function In order to avoid forgetting to turn off the screen in “ CAM ” mode, a timer function can be set to automatically turn off the image after a set time. ∗ Default value is “ 5M ” (five minutes). 1. Press the [ FUNC ] button and switch to the “ CAM ” mode. 2. Press the [ MODE ] b ...
-
Clarion CJ-981E - page 9
CJ-981E 11 English 3-1. Press the [ SELECT ] ( z ) button to choose either “ ON ” or “ OFF ” . • ON: camera display is automatically linked to the circuit operation. • OFF: camera display is not automatically linked to the circuit operation. ° Hazard Switch Linked Switching • CAMERA2 Hazard-Switch Linked Display (CAM2 HAZARD) When th ...
-
Clarion CJ-981E - page 10
12 CJ-981E English Using the Dimmer Function (DIM) When the power supply box ’ s parking-lamp switch wire is wired to the vehicle ’ s parking lamp switch, the screen is dimmed automatically for ease of viewing whenever the parking lamp switch is activated. 1. Hold the [ CAM1/DIM ] switch depressed for about 1 second to switch the dimmer between ...
-
Clarion CJ-981E - page 11
CJ-981E 13 English 5. INST ALLA TION Before Installing W ARNING • Always disconnect the negative - - - - - terminal cable from the vehicle battery before performing any installation work. If the battery is not disconnected, a short- circuit could occur during installation due to accidental contact between + and - wires, causing vehicular damage o ...
-
Clarion CJ-981E - page 12
14 CJ-981E English 5. T emporarily remove the display unit. Lift up the display unit while pressing down on the unlock knob to temporarily remove the display unit. While pressing down Lift up. 6. Attach the stand base to the determined location on the attachment surface. Remove the peel-off sheet from the base of the stand base, and firmly attach t ...
-
Clarion CJ-981E - page 13
CJ-981E 15 English 6. TROUBLESHOOTING ■ In event of a malfunction, check the following symptoms and remedies before calling for professional repair: Symptom Cause Remedy No image Image is dark Colors are thin Hues are poor BRIGHT/DIMMER setting is adjusted to minimum setting. BRIGHT/DIMMER setting is incorrect. [ CAM1/DIM ] button has been presse ...
-
Clarion CJ-981E - page 14
16 CJ-981E English ...
-
Clarion CJ-981E - page 15
2 CJ-981E All Rights Reserved. Copyright © 2005: Clarion Co., Ltd. Printed in Japan / Imprimé au Japon / Gedruckt in Japan / Stampato in Giappone Clarion Co., Ltd. CJ-981E 280-8293-00 2005/7 (A·K) Be sure to unfold and read the next page. Veuillez déplier et vous référer à la page suivante. Bitte ausbreiten und die nächste Seite lesen. Assi ...
¿Tienes una pregunta acerca de Clarion CJ-981E?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Clarion CJ-981E, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Clarion CJ-981E probablemente compartirá una forma de solucionarlo.