Manual de instrucciones Barco 5MP1HM

117 de páginas 6.98 mb
Descargar

Pasar a la página of 117

Summary
  • Barco 5MP1HM - page 1

    M E D IS 5MP1HM S ystem Manual ...

  • Barco 5MP1HM - page 2

    B410046 / 00 July 2003 © 2003 BARCO NV . All rights reserved BarcoView Theodoor Sevenslaan 106 8500 K ortrijk, Belgium Phone: +32(0)56 23 32 44 F ax: +32(0)56 23 33 74 E-mail: sales.medical@barco.com http://www .barco view .com BarcoView Inc 3059 Premiere Parkway Duluth, Georgia, 30097,USA Phone: +1 678 475 8000 F ax: +1 678 475 8100 E-mail: sales ...

  • Barco 5MP1HM - page 3

    System manual MeDis 5MP1HM 3 CONTENTS Introduction ....................................................................................................... 7 Introduction ......................................................................................................... 9 Contents of the p ackage ............................................... ...

  • Barco 5MP1HM - page 4

    Driver Installation ..................................................................................... 31 BARCO DPMS Screen Saver Inst allation ......................... ....................... 35 Setting the Resolution of Y our 5MP1HM .............. .................................. 38 Reinstalling or Updating your BarcoMed 5MP2 AURA, 5MP2, 5M ...

  • Barco 5MP1HM - page 5

    W ork Schedule ........................................................................................ 70 Beg in Work Day ....................................................................................... 70 End W ork Day .......................................................................................... 70 Screen Saver During W ork Da ...

  • Barco 5MP1HM - page 6

    Important considerations .............................................................................. 97 Operation: User controls ................................................................................... 98 Switching on / off .......................................................................................... 98 Contrast and brigh ...

  • Barco 5MP1HM - page 7

    System manual MeDis 5MP1HM 7 INTRODUCTION ...

  • Barco 5MP1HM - page 8

    System manual MeDis 5MP1HM 8 (This page intentionally left blank.) Introduction ...

  • Barco 5MP1HM - page 9

    System manual MeDis 5MP1HM 9 INTRODUCTION BARCO MeDis ® 5MP1H is a total display solution for medical applications. This can be a sing le-head or multi-head system. MeDis comes with everything you need to set-up a complete viewing system, from video cables to displays. Content s of the p ackage Please refer to the packing list on the outside of th ...

  • Barco 5MP1HM - page 10

    System manual MeDis 5MP1HM 10 (This page intentionally left blank) Introduction ...

  • Barco 5MP1HM - page 11

    System manual MeDis 5MP1HM 11 DISPLA Y CONTROLLER INST ALLA TION ...

  • Barco 5MP1HM - page 12

    System manual MeDis 5MP1HM 12 (This page intentionally left blank.) Display Controller installation ...

  • Barco 5MP1HM - page 13

    System manual MeDis 5MP1HM 13 BarcoMed 5MP1HM Product Overview The BarcoMed 5MP1HM Display Controller delivers a quality 2048 x 2560 pixel image with 1024 simultaneous shades of gray for medical imaging applications. The BarcoMed 5MP1HM includes features specifically designed to meet the demands of mammography . Features of the BarcoMed 5MP1HM  ...

  • Barco 5MP1HM - page 14

    System manual MeDis 5MP1HM 14 (This page intentionally left blank.) Display Controller installation ...

  • Barco 5MP1HM - page 15

    System manual MeDis 5MP1HM 15 HARDW ARE INST ALLA TION Notice: W ear a protective ESD strap during installation or handling of the controller . Electrostatic charges can damage the controller . Familiarizing Yourself With the 5MP1HM Prior to installing your 5MP1HM controller(s) in your PC please take a few minutes to familiarize yourself with both ...

  • Barco 5MP1HM - page 16

    System manual MeDis 5MP1HM 16 should now remove any third party VGA controller from your system or disable the integrated VGA controller . If you decide to use a separate VGA card and monitor as your boot monitor , you must disable the on-board VGA capabilities of the BarcoMed 5MP1HM by moving the jumper to the bottom two pins at J- 1. Figure 2: VG ...

  • Barco 5MP1HM - page 17

    System manual MeDis 5MP1HM 17 Installing the BarcoMed 5MP1HM Display Controller Install the 5MP1HM into your computer following these steps: 1. Turn off the power to your computer and disconnect the power cord. 2. Remove the chassis cover according to the manufacturer s instructions. Be sure to observe safety warnings. 3. If you have decided to ...

  • Barco 5MP1HM - page 18

    System manual MeDis 5MP1HM 18 Figure 4: The Video Outputs. : 1 D I Vy a l p s i d t s r i f e h t r o f r o t c e n n o c ) n e e r g ( o e d i V e h t t c e n n o C . e r e h : S Ht s 1 e h t r o f r o t c e n n o c ) k c a l B ( c n y S l a t n o z i r o H e h t t c e n n o C . e r e h y a l p s i d : S Vt s 1 e h t r o f r o t c e n n o c ) e t ...

  • Barco 5MP1HM - page 19

    System manual MeDis 5MP1HM 19 DISPLA Y INST ALLA TION ...

  • Barco 5MP1HM - page 20

    System manual MeDis 5MP1HM 20 (This page intentionally left blank.) Display installation ...

  • Barco 5MP1HM - page 21

    System manual MeDis 5MP1HM 21 DISPLA Y INST ALLA TION Example An example of a correct set-up is shown in figure 5. Please take a good look at the figures, and then read the rest of the text very carefully . #1 #2 Display #1 (rear view ) Display #2 (rear view) Video cable #1 Video cable #2 Remote cable Remote cable PC Video cable from PC graphic boa ...

  • Barco 5MP1HM - page 22

    System manual MeDis 5MP1HM 22 Placing and configuring the displays 1 The last part of this system manual is a copy of the display user manual. Follow the precautions and guidelines from this part. 2 The display(s) from the MeDis system are numbered. E.g., in a quad-head system, the displays are numbered 1 to 4. Y ou can find the number of the displ ...

  • Barco 5MP1HM - page 23

    System manual MeDis 5MP1HM 23 Connection of the Remote cables Note : One of the remote cables is packed inside the MediCal box. 1 The Remote cables that come with MeDis are not numbered. It does not matter which cable you connect to which display , as long as you take the Remote inputs and outputs on the displays into account. 2 T ake one of the re ...

  • Barco 5MP1HM - page 24

    System manual MeDis 5MP1HM 24 (This page intentionally left blank.) Display installation ...

  • Barco 5MP1HM - page 25

    System manual MeDis 5MP1HM 25 BARCOMED DRIVER AND SOFTW ARE INST ALLA TION ...

  • Barco 5MP1HM - page 26

    System manual MeDis 5MP1HM 26 (This page intentionally left blank.) BarcoMed driver and sof tware installation ...

  • Barco 5MP1HM - page 27

    System manual MeDis 5MP1HM 27 Planning Y our Barcomed Windows 2000 Installation Because of W indows 2000s Plug and Play features, it is very important to carefully plan your BarcoMed Board Hardware and Software installation and install the device drivers in the same sequence that the boards are installed in the PCI slots. When inst alling BarcoM ...

  • Barco 5MP1HM - page 28

    System manual MeDis 5MP1HM 28 If you choose to install multiple types of BarcoMed Imaging Boards in your computer it is important to carefully note which PCI slot each board is in and then install the drivers for each type of board based on the PCI slot they are installed in. If you are using the VGA Capabilities of a BarcoMed Imaging Board it is i ...

  • Barco 5MP1HM - page 29

    System manual MeDis 5MP1HM 29 Inst alling the BarcoMed 5MP2 AURA, 5MP2, 5MP1HM, 5MP1H or 4MP2 Windows 2000 Software SPECIAL NOTE: Prior to installing the BarcoMed drivers and related software you MUST install the BarcoMed Display Controller(s), connect the high resolution display(s) to the card(s), and turn the high resolution display(s) on. Refer ...

  • Barco 5MP1HM - page 30

    System manual MeDis 5MP1HM 30 contents of your BarcoMed Software CD and double click on the file: Setup.exe to start the wizard. The BarcoMed Product Inst allation W izard will start by inspecting your system to make certain that all of the Windows components it needs are up to date. If it determines that the Microsoft Installer is current, t ...

  • Barco 5MP1HM - page 31

    System manual MeDis 5MP1HM 31 Figure 7 Driver Installation 7. Click Next on the Display Driver Wizards Welcome Screen to continue or Cancel to exit the Display Driver Wizard and return to the Software Inst all W izard. 8. The Device Selection Screens dialog box should show only those devices physically installed and supported by t ...

  • Barco 5MP1HM - page 32

    System manual MeDis 5MP1HM 32 Figure 8 Click OK to continue. If you dont want to replace the exiting driver , click OK and then click Cancel . 10. If you are installing the BarcoMed 5MP1HM or 5MP1H skip to step1 1. S tep 10 applies to the 5MP2 AURA, 5MP2 and 4MP2 only . Y our selection on the Enable DualView screen det ...

  • Barco 5MP1HM - page 33

    System manual MeDis 5MP1HM 33 Figure 10: 5MP2 AURADualView Enabled If you wish to enable DualView check the checkbox next to Enable the DualView device?, and click Next . If you do not wish to enable DualView simply click Next to continue. 1 1. The Device Confirmation screen displays the device driver that will be i ...

  • Barco 5MP1HM - page 34

    System manual MeDis 5MP1HM 34 Figure 1 1 14. Wh en the Wizard tells you that it has successfully installed the selected driver , click Finish . The wizard will now begin installing the next selected piece of BarcoMed Software. If you are working with the default selections, this will be the BARCO DPMS InstallShield W izard. Please turn to the ...

  • Barco 5MP1HM - page 35

    System manual MeDis 5MP1HM 35 to enable DualView , you will need to reinstall the drivers with the Enable the DualView device? checkbox checked. Figure 12 BARCO DPMS Screen Saver Installation 15. Click Next on the W elcome Screen of the BARCO DPMS InstallShield W izard to begin the installation. Click Cancel t o cancel the DPMS in ...

  • Barco 5MP1HM - page 36

    System manual MeDis 5MP1HM 36 Figure 13 17. The Setup T ype page will now appear (figure 14). Choose T ypical to install the default schemes with English names. Choose Custom to install the default schemes with either Dutch or German names. Currently the default schemes are not supported in the Japanese, Korean and Chinese languag ...

  • Barco 5MP1HM - page 37

    System manual MeDis 5MP1HM 37 During installation the wizard will display a progress screen. 19. When the InstallShield Wizard Completed page appears, click Finish . 20. The wizard will now display the screen shown in figure 15 below . If you are finished installing your BarcoMed Software, click Finish to exit the BarcoMed Product ...

  • Barco 5MP1HM - page 38

    System manual MeDis 5MP1HM 38 Setting the Resolution of Your 5MP1HM 1. T o set the resolution for your high resolution display(s), right click on the desktop and select Properties . Select the Settings ta b (see figure 16). Now select the rectangle that represents the virtual display of the BarcoMed 5MP1HM Display Controller you are wor ...

  • Barco 5MP1HM - page 39

    System manual MeDis 5MP1HM 39 s n o i t u l o s e R e l p m a S r e l l o r t n o C n o i t a r u g i f n o C y a l p s i D n o i t u l o s e R p o t k s e D l a u t r i V n o i t u l o s e R A R U A 2 P M 5 e n O a n i s y a l p s i d 2 w o r e l g n i s 0 6 5 2 x 8 4 0 20 6 5 2 x 6 9 0 4 A R U A 2 P M 5 e n O a n i s y a l p s i d 2 n m u l o c e ...

  • Barco 5MP1HM - page 40

    System manual MeDis 5MP1HM 40 Figure 16: The Windows 2000 Display Properties Control Panel Settings T ab after the drivers have been installed and the resolution set. Note: The system shown in figure 16 above is a single BarcoMed Display Controller , no 3 rd party VGA card configuration, your system may look different. Reinstalling or Updating your ...

  • Barco 5MP1HM - page 41

    System manual MeDis 5MP1HM 41 Planning Y our Barcomed Windows XP Installation Because of W indows XPs Plug and Play features, it is very important to carefully plan your BarcoMed Board Hardware and Software installation and install the device drivers in the same sequence that the boards are installed in the PCI slots. When inst alling BarcoMed 5 ...

  • Barco 5MP1HM - page 42

    System manual MeDis 5MP1HM 42 If you have previously installed drivers for the BarcoMed Display Controllers in your Windows XP System, Windows XP should identify the board by their correct BarcoMed name. However , while updating the drivers to a new version or reinstalling the current driver Windows XP may identify the BarcoMed Display Controllers ...

  • Barco 5MP1HM - page 43

    System manual MeDis 5MP1HM 43 Inst alling the BarcoMed 5MP2 AURA, 5MP2, 5MP1HM, 5MP1H or 4MP2 Windows XP Software SPECIAL NOTE: Prior to installing the BarcoMed drivers you MUST install the BarcoMed Display Controller(s), connect the high resolution display(s) to the controller(s), and turn the high resolution display(s) on. Refer to the Hardware I ...

  • Barco 5MP1HM - page 44

    System manual MeDis 5MP1HM 44 7. Insert your BarcoMed Software CD into your computer s CD drive. The BarcoMed Product Inst allation W izard should start automatically . If it doesnt start within 5 minutes, browse the contents of your BarcoMed Software CD and double click on the file: Setup.exe to start the wizard. 8. The BarcoMed ...

  • Barco 5MP1HM - page 45

    System manual MeDis 5MP1HM 45 Note: Y ou can install the driver for only one type of BarcoMed device at a time. If you have multiple types of BarcoMed devices installed in your computer , you will need to rerun the installer to install the drivers for the other devices. 1 1. If you selected a device with an existing driver , the wizard will compare ...

  • Barco 5MP1HM - page 46

    System manual MeDis 5MP1HM 46 Figure 19: 5MP2 AURADualView Enabled Figure 20: 5MP2 AURADualView Disabled BarcoMed driver and sof tware installation ...

  • Barco 5MP1HM - page 47

    System manual MeDis 5MP1HM 47 If DualView is not enabled, you will see a single virtual screen in the display properties dialog for both heads of a BarcoMed Display Controller . If DualView is enabled, you will see a two virtual screens in the dialog box on the Settings T ab of the Display Properties Control Panel, one for each head of the BarcoMed ...

  • Barco 5MP1HM - page 48

    System manual MeDis 5MP1HM 48 Note: Clicking Cancel will also return you to the BarcoMed Product Inst all W izard, but will not delete the Barco Display Driver . The wizard will also begin to install the next selected piece of BarcoMed Software. If the Wizard failed to successfully install the selected driver , it will warn you (figure 22). C ...

  • Barco 5MP1HM - page 49

    System manual MeDis 5MP1HM 49 Figure 23 20. The Setup T ype page will now appear (figure 24). Choose T ypical to install the default schemes with English names. Choose Custom to install the default schemes with either Dutch or German names. Currently the default schemes are not supported in the Japanese, Korean and Chinese languag ...

  • Barco 5MP1HM - page 50

    System manual MeDis 5MP1HM 50 21. The Ready to Install Program page will now appear , click Install to install DPMS or Back if you wish to change any of your DPMS installation settings. During installation the wizard will display a progress screen. 22. When the InstallShield Wizard Completed page appears, click Finish ...

  • Barco 5MP1HM - page 51

    System manual MeDis 5MP1HM 51 Setting the Resolution of Your 5MP1HM Once you have completed the installation of the display driver , you need to set the resolution for each display connected to each controller . 1. T o set the resolution for your high resolution display(s), right click on the desktop and select Properties . SPECIAL NOTE: If y ...

  • Barco 5MP1HM - page 52

    System manual MeDis 5MP1HM 52 Repeat steps 2 - 7 for each aditional BarcoMed 5MP1HM display controlled installed in your system. If you are using a Quad-Head Configuration repeat all of the above steps for the two displays on the second display controller . Special note: After setting the resolutions in a Quad-Head Configuration you may need to dra ...

  • Barco 5MP1HM - page 53

    System manual MeDis 5MP1HM 53 Reinstalling or Updating your BarcoMed 5MP2 AURA, 5MP2, 5MP1HM, 5MP1H or 4MP2 Drivers T o reinstall or update only the BarcoMed Driver , follow the steps described in the section Using the BarcoMed Product Installation Wizard found at the beginning of this chapter with the following changes. 1. Skip S tep 1. 2. I ...

  • Barco 5MP1HM - page 54

    System manual MeDis 5MP1HM 54 (This page intentionally left blank.) BarcoMed driver and sof tware installation ...

  • Barco 5MP1HM - page 55

    System manual MeDis 5MP1HM 55 BARCOMED CONTROLLER T OOLS ...

  • Barco 5MP1HM - page 56

    System manual MeDis 5MP1HM 56 (This page intentionally left blank.) BarcoMed controller tools ...

  • Barco 5MP1HM - page 57

    System manual MeDis 5MP1HM 57 BARCOMED DRIVER TAB Introduction After the BarcoMed Windows Display Controller Driver is installed, a new Display Properties tab is available for configuring special features of the BarcoMed Display Controller . Please note that you must have logged on to Windows using an account with administrator privileges in order ...

  • Barco 5MP1HM - page 58

    System manual MeDis 5MP1HM 58 Figure 28: BarcoMed Driver T ab under Windows 2000 Figure 29: BarcoMed Driver T ab under Windows XP BarcoMed controller tools ...

  • Barco 5MP1HM - page 59

    System manual MeDis 5MP1HM 59 St atus Displays the current BarcoMed Display Controller , driver, and the currently selected display resolution. Graphics Board This displays the current BarcoMed Display Controller . Driver Version This displays the current BarcoMed driver version. Resolution This displays the currently selected display resolution. P ...

  • Barco 5MP1HM - page 60

    System manual MeDis 5MP1HM 60 index 10 to 245 contain the missing gray values so that the palette has the full 256 gray values within it. Please note that dithering is not permitted while in this mode. The Enable Dithering check box will be grayed-out, and dithering will be automatically disabled regardless of whether this check box is checked. Thi ...

  • Barco 5MP1HM - page 61

    System manual MeDis 5MP1HM 61 application requires this Static Gray Palette with NO System colors mode, contact your application provider . Drawing Modes Y ou can choose one or both of the following Drawing Modes: Enable DirectDraw This option allows the user to enable or disable DirectDraw . DirectDraw is a software interface that provides d ...

  • Barco 5MP1HM - page 62

    System manual MeDis 5MP1HM 62 one row option from the pull-down list. This would cause the Windows virtual desktop to be resized to fit on the three monitors, and you can move your cursor horizontally from one screen to the other . If Custom Configuration is displayed, it means that the current monitor configuration was set via the registr ...

  • Barco 5MP1HM - page 63

    System manual MeDis 5MP1HM 63 BARCOMED HARDW ARE TAB Introduction The BarcoMed Hardware T ab is used for gathering information about BarcoMed Display Controller(s). For all BarcoMed Display Controller(s) it will display PCI information. In addition for BarcoMed Display Controller(s) based on the AURA video chipset it will also display information a ...

  • Barco 5MP1HM - page 64

    System manual MeDis 5MP1HM 64 T o access the BarcoMed Hardware T ab do the following: 1. Open the Display Properties Control Panel by right clicking on the desktop, then select Properties. 2. Under Wi ndo ws NT 4.0, Click on the BarcoMed Hardware T ab (see figure 30, below). Under W indows 2000 and Windows XP , click on the Set ...

  • Barco 5MP1HM - page 65

    System manual MeDis 5MP1HM 65 Figure 31: BarcoMed Hardware T ab under Windows 2000 and Windows XP Using The BarcoMed Hardware T ab Device Displays the current BarcoMed Display Controller , driver, and the currently selected display resolution. Identify Device: This button is for BarcoView Medical Imaging Systems (MIS) internal use only and is graye ...

  • Barco 5MP1HM - page 66

    System manual MeDis 5MP1HM 66 PCI Information Device ID: Displays the devices PCI Device ID number . V endor ID: Displays the device manufacturer s PCI V endor ID number . Subsystem ID: Displays the devices PCI Subsystem ID number . SubsystemV endorID: Displays the devices PCI Subsystem Vendor ID number . VGA St atus: Displays whether t ...

  • Barco 5MP1HM - page 67

    System manual MeDis 5MP1HM 67 update the firmware stored in the ROM of the currently selected BarcoMed Display Controller . The BarcoMed Hardware Configuration Wizard is a wizard style application that uses dialog boxes to guide the user through the flash update procedure. The user will be prompted to select a firmware update file to use for ...

  • Barco 5MP1HM - page 68

    System manual MeDis 5MP1HM 68 (This page intentionally left blank.) BarcoMed controller tools ...

  • Barco 5MP1HM - page 69

    System manual MeDis 5MP1HM 69 BARCO DPMS SCREEN SA VER OVERVIEW Introduction The BARCO DPMS (Display Power Management Signaling) Screen Saver allows the user to set power and display saving features for medical displays driven by BarcoMed Display Controllers. At the end of the work day , the display will enter certain DPMS states as requested by th ...

  • Barco 5MP1HM - page 70

    System manual MeDis 5MP1HM 70 BARCO DPMS Screen Saver Options From the BARCO DPMS Screen Saver Control Panel you can change many DPMS screen saver elements simultaneously . The DPMS screen saver elements in each scheme are work schedule, work day screen saver, DPMS settings after work day , and many additional options. Current Scheme Lists th ...

  • Barco 5MP1HM - page 71

    System manual MeDis 5MP1HM 71 Screen Saver During Work Day On CRT based displays, such as the Barco MGD series, a regular screen saver can be invoked during user inactivity during the work day . This regular screen saver and its settings can be chosen from the Screen Saver During Work Day section. We recommend using an all black s ...

  • Barco 5MP1HM - page 72

    System manual MeDis 5MP1HM 72 e t a t S S M P D s g n i v a S r e w o P r o t i n o M e m i T y r e v o c e R n Oe n o NA / N y b - d n a t Sl a m i n i Mt r o h S d n e p s u Sl a i t n a t s b u Sr e g n o L f f Om u m i x a Mt s e g n o L Monitor Settings Select the amount of time the display requires to warm-up. Since all CRT based displays req ...

  • Barco 5MP1HM - page 73

    System manual MeDis 5MP1HM 73 privileges. If a user who does not have administrator privileges tries to save a scheme using an existing default scheme name, an error message is displayed saying you must have administrator rights to modify a default scheme. If an administrator saves a scheme using an existing default scheme name, a message is ...

  • Barco 5MP1HM - page 74

    System manual MeDis 5MP1HM 74 Figure 32: Windows NT 4.0 Screen Saver T ab BarcoMed controller tools ...

  • Barco 5MP1HM - page 75

    System manual MeDis 5MP1HM 75 Figure 33: Windows 2000 Screen Saver T ab Figure 34: Windows XP Screen Saver T ab BarcoMed controller tools ...

  • Barco 5MP1HM - page 76

    System manual MeDis 5MP1HM 76 3. Click on the Settings button. The BARCO DPMS Screen Saver Control Panel will open (see figure 35). Figure 35: BARCO DPMS Settings Control Panel 4. Use the default schemes by selecting one of the three default schemes. Click OK . Then Click OK again. Note: If you make any changes to any of the ...

  • Barco 5MP1HM - page 77

    System manual MeDis 5MP1HM 77 Figure 36 T o create a new scheme by modifying one of the three default schemes please do the following. 1. Open the Display Properties Control Panel by right clicking on an empty space of the desktop and selecting Properties from the drop down menu; then select the Screen Saver tab. 2. Select the  ...

  • Barco 5MP1HM - page 78

    System manual MeDis 5MP1HM 78 10. Save your preferences by pressing the Save As button and entering a new profile name in the Save Profile Setting dialog box. 1 1. Apply your new scheme by clicking OK. 12. Click OK again to close the Display Properties Control Panel. Inst alling or Reinst alling BARCO DPMS T o install ...

  • Barco 5MP1HM - page 79

    System manual MeDis 5MP1HM 79 3. Select the radio button next to Remove on the Program Maintenance screen of the Wizard and click Next (figure 38). Figure 38 4. Click Remove on the Remove Program Screen of the Wizard (figure 39). Figure 39 5. When the Wizard has finished removing the program, click Finish on the Inst allShie ...

  • Barco 5MP1HM - page 80

    System manual MeDis 5MP1HM 80 Figure 40 6. Click Quit to exit the BarcoMed Product Inst allation W izard. BarcoMed controller tools ...

  • Barco 5MP1HM - page 81

    System manual MeDis 5MP1HM 81 MEDICAL SOFTW ARE INST ALLA TION AND USAGE ...

  • Barco 5MP1HM - page 82

    System manual MeDis 5MP1HM 82 (This page intentionally left blank.) MediCal software installation and usage ...

  • Barco 5MP1HM - page 83

    System manual MeDis 5MP1HM 83 MEDICAL SOFTW ARE INST A L L A TION Install MediCal on the PC. Follow the instructions from the MediCal User Guide. Important: Do not forget you have to have Administrator privileges to install or uninstall MediCal. OPTICAL SENSOR CONNECTION If you are using an X-Rite DTP92 sensor for conformity calibration and consist ...

  • Barco 5MP1HM - page 84

    System manual MeDis 5MP1HM 84 (This page intentionally left blank.) MediCal software installation and usage ...

  • Barco 5MP1HM - page 85

    System manual MeDis 5MP1HM 85 DISPLA Y USER MANUAL ...

  • Barco 5MP1HM - page 86

    System manual MeDis 5MP1HM 86 (This page intentionally left blank.) Display User Manual ...

  • Barco 5MP1HM - page 87

    System manual MeDis 5MP1HM 87 © 2003 BARCO nv . All rights reserved. Trademark information TrueGrey , MediCal, BarcoMed, and MeDis are registered trademarks of BARCO NV . W indows NT is a registered trademark of Microsoft Corporation. Display User Manual ...

  • Barco 5MP1HM - page 88

    System manual MeDis 5MP1HM 88 Regulations  This apparatus conforms to: IEC601-1, UL2601-1, cUL2601-1, EN 60601-1  This apparatus is classified as Type B without Applied Part. Usage in Hazardous locations  Class I equipment  Equipment not suitable for use in the presence of a flammable anaesthetic mixture with air or with oxygen or nitro ...

  • Barco 5MP1HM - page 89

    System manual MeDis 5MP1HM 89 INTRODUCTION Overview Resolution and bandwidths The BARCO MGD 521 M and MGD 521 MKII displays are ultra-high resolution, grayscale portrait displays. Their outstanding visual performance, combining a 5 MegaPixel resolution with a very high brightness, makes them ideal for diagnostic imaging and many other medical and s ...

  • Barco 5MP1HM - page 90

    System manual MeDis 5MP1HM 90 adjust and check BARCOs medical displays. A lot of adjustments can also be done on the monitor itself, by means of an extensive on-screen menu system, accessible from the rear panel controls. Power saving system The MGD 521 displays are equipped with a power saving system. When left idle for a certain time, the comp ...

  • Barco 5MP1HM - page 91

    System manual MeDis 5MP1HM 91 About the manuals This guide is meant for people who want to install and use the MGD 521 displays, as well as people who need to install and adjust the displays. Chapter 4, Adjustments, is meant for this second category only , because it describes actions and procedures that require a technical skill to be performed pr ...

  • Barco 5MP1HM - page 92

    System manual MeDis 5MP1HM 92 INST ALLA TION Precautions  Keep your original packaging. It is designed for this display and is the ideal protection during transport.  Do not lift the display all by yourself to avoid injury .  Avoid reflections in the picture tube to reduce eye strain.  Place the display on a strong and stable table or d ...

  • Barco 5MP1HM - page 93

    System manual MeDis 5MP1HM 93 Controls and connectors 1 REMOTE OUT REMOTE IN VIDEO HS / CS VS 2 4 5 6 7 8 9 10 11 3 {1} Optical sensor plug {2} Ambient Light Compensation (ALC) sensor (optional) {3} Green power LED {4} Control knob, combination of a push button and a turning knob. The control knob is used for switching the power on/off, and selecti ...

  • Barco 5MP1HM - page 94

    System manual MeDis 5MP1HM 94 Signal connection a) Connection of video signals The connected equipment must comply to all relevant safety demands. Important: The use of low-quality video cables can distort the video signal and influence diagnosis. 1. Check the impedance of the imaging board that produces the video signals you want to connect. It mu ...

  • Barco 5MP1HM - page 95

    System manual MeDis 5MP1HM 95 b) Connection of data signals The display can be controlled remotely by a computer through the serial data bus. A typical example of this, is the MediCal software that controls the display . MediCal runs on a PC that is connected through the serial data bus. This PC is not necessarily the same computer as the one that ...

  • Barco 5MP1HM - page 96

    System manual MeDis 5MP1HM 96 d) Connection of power 1. Power cord: Utilize a UL-listed detachable power cord, 3-wire, type SJ or equivalent, 18 A WG min., rated 300 V min., provided with a hospital-grade type plug 5-15P configuration for 120V application, or 6-15P for 240V application. 2. Plug one end of the power cord into the rear of the display ...

  • Barco 5MP1HM - page 97

    System manual MeDis 5MP1HM 97 Import ant considerations  The best environment for diagnostic imaging is one with controlled and dimmed ambient light. The human eye's sensitivity depends on the ambient light strength. It is most sensitive to small contrast changes (or subtle image details) at limited ambient light levels.  The best ambien ...

  • Barco 5MP1HM - page 98

    System manual MeDis 5MP1HM 98 OPERA TION: USER CONTROLS Important : The best way to adjust and control the display is by using MediCal, which displays the ideal test patterns for correct adjustment. However, in case you do not dispose of MediCal, you can control and adjust the display by means of the built-in On-Screen Display (OSD). Switching on / ...

  • Barco 5MP1HM - page 99

    System manual MeDis 5MP1HM 99 Contrast and brightness control Contrast and brightness can be controlled through the OSD menus. To activate the OSD Turn the control knob {4} from left to right or from right to left. As a result, the OSD main menu appears. Note: The control knob should turn over at least 30 degrees before the OSD becomes visible. Con ...

  • Barco 5MP1HM - page 100

    System manual MeDis 5MP1HM 100 To control contrast manually 1 Turn the control knob to select Contrast in the OSD main menu. 2 Press the control knob shortly . The contrast control menu appears. 3 In the contrast control menu, select Manual contrast adjustment and press the control knob shortly . The contrast scroll bar appears. 4 Turn the control ...

  • Barco 5MP1HM - page 101

    System manual MeDis 5MP1HM 101 STATUS INFORMATION Display Name: MGD 521MKII Serial Number: 5114147 Mode Name: New mode Mode H-frequency: 175.32 kHz Mode V-frequency: 79.94 Hz Software Version: V 1.01 Run time: 50 hours White level: 300 cd/m2 Activity timeout 30s SH compensation OFF Actual H-frequency:125.30kHz Actual V-frequency: 80.00 Hz - Exit Ex ...

  • Barco 5MP1HM - page 102

    System manual MeDis 5MP1HM 102 Software V ersion: The internal software version. Run time: The total operating time since production, including burn-in time. White level: The displays white level or light output after calibration, in calibrated position. Activity timeout : This is the time, expressed in seconds, before the display interrupts the ...

  • Barco 5MP1HM - page 103

    System manual MeDis 5MP1HM 103 AD V ANCED SETTINGS AN D ADJUSTMENTS (FOR SERVICE ST AFF ONL Y) Important: The functions and controls described in this chapter can have a serious impact on the performance of the display . They should be touched by trained service staff only! Settings SETTINGS INFORMATION - LUC OFF - ALC OFF - Orbiter OFF - Power sav ...

  • Barco 5MP1HM - page 104

    System manual MeDis 5MP1HM 104 Explanation of the Settings menu items LUC: LUC is short for Luminance Uniformity Control. When switched on, the internal waveform processor will modulate the gain of the video amplifier so that the luminance is equal all over the screen (within a tolerance of +/- 5%). The LUC system can be calibrated in the Adjustmen ...

  • Barco 5MP1HM - page 105

    System manual MeDis 5MP1HM 105 ADJUSTMENTS - Geometry - Focus - ALC - Luminance uniformity - Factory reset - Exit Adjustments menu Adjustment s a) How to make the adjustments 1 Turn the control knob at the rear from left to right or from right to left to activate the On-Screen Display (OSD) main menu. 2 In the main menu, turn the control knob to se ...

  • Barco 5MP1HM - page 106

    System manual MeDis 5MP1HM 106 Width Horizontal position Height Vertical position Blanking - Blanking left Blanking - Blanking right Blanking - Blanking top Display User Manual ...

  • Barco 5MP1HM - page 107

    System manual MeDis 5MP1HM 107 Interlacing - Pre correction In most cases you do not need to change this adjustment. Y ou may need to increase this adjustment only when the connected video and sync signal contains an abnormally big number of equalization pulses before the vertical sync (more than 8 lines), resulting in a phase error (geometry disto ...

  • Barco 5MP1HM - page 108

    System manual MeDis 5MP1HM 108 SH Compensation: SH Position With SH Compensation on, we advise to use the SH Position control instead of the Horizontal Position control in the Geometry menu. Advanced geometry - Horizontal skewing Advanced geometry - Horizontal bowing Advanced geometry - Horizontal trapezium Advanced geometry - Horizontal parabola A ...

  • Barco 5MP1HM - page 109

    System manual MeDis 5MP1HM 109 Advanced geometry - Corner top right Advanced geometry - Corner bottom left Advanced geometry - Corner bottom right Advanced geometry - Linearity & S-correction - Horizontal linearity Advanced geometry - Linearity & S-correction - Horizontal S-corr Advanced geometry - Linearity & S-correction - Vertical li ...

  • Barco 5MP1HM - page 110

    System manual MeDis 5MP1HM 110 Advanced geometry - Advanced bowing & skewing - Horizontal bowing left Advanced geometry - Advanced bowing & skewing - Horizontal bowing right Advanced geometry - Advanced bowing & skewing - Horizontal skewing left Advanced geometry - Advanced bowing & skewing - Horizontal skewing right Advanced geomet ...

  • Barco 5MP1HM - page 111

    System manual MeDis 5MP1HM 111 Focus Static focus Adjust St atic focus to obtain an image as sharp as possible in the center . Focus zone Y ou can adjust the focus in 25 independent zones. Turn the control knob to obtain an image as sharp as possible in the selected zone. Press the control knob to switch to the next zone. ALC (optional) Ambient Lig ...

  • Barco 5MP1HM - page 112

    System manual MeDis 5MP1HM 112 Luminance uniformity This menu allows you to calibrate the display , including the Luminance Uniformity circuit. Proceed as follows: 1 Connect the X-Rite DTP92 sensor and apply the black shield (see chapter "Installation"). 2 Follow the instructions on the screen. Factory reset This function allows you to un ...

  • Barco 5MP1HM - page 113

    System manual MeDis 5MP1HM 113 MAINTENANCE Picture tube The glass panel of the picture tube is handled with a special coating. T ake care not to damage or scratch the coating. Clean the picture tube with a soft woolen or cotton cloth. The cloth should be moist, not wet! Use a watery solution or a mild commercial glass cleaning solution. Apply (e.g. ...

  • Barco 5MP1HM - page 114

    System manual MeDis 5MP1HM 114 TROUBLESHOOTING There appears no image on the picture tube, the green LED at the front is out  Check if the power cord is properly connected to the power outlet and to the display .  Check if the power button is switched on. There appears no image, the green LED is on The display is switched in S tand-by , manua ...

  • Barco 5MP1HM - page 115

    System manual MeDis 5MP1HM 115 APPENDIX A : BACKGROUND INFORMA TION Luminance Uniformity Correction A characteristic (or limitation) of every picture tube (CRT) is that the luminance decreases towards the edge of the screen surface. The decrease is normally 20 to 30 %. This is caused by the shape of the picture tube. Inside the CRT , a so- called e ...

  • Barco 5MP1HM - page 116

    System manual MeDis 5MP1HM 116 At last, the imaging board delivers no sync signals at all, and the micro-controller switches off all but one power supplies in the display . Only the micro-controller's own supply keeps on running, resulting in a very low power consumption of 5 W . If you start using the computer again, the imaging board switche ...

  • Barco 5MP1HM - page 117

    System manual MeDis 5MP1HM 117 Picture tube: Faceplate transmission: 32% Faceplate type: ARC panel Image representation: portrait Phosphor: P45 (standard ) or P104 (option for MGD 521 MKII only) Light output: (P45 phosphor) MGD 521: Calibrated: 300 Cd/m2 MGD 521M: Calibrated: 400 Cd/m2 Peak: 600 Cd/m2 Resolution: Max. adress. pixels: 2048 Max. adre ...

Fabricante Barco Categoría Automobile Accessories

Los documentos del dispositivo Barco 5MP1HM que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Barco
- manuales de instrucciones 5MP1HM
- hojas de producto Barco
- folletos informativos
- o etiquetas energéticas Barco 5MP1HM
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Barco 5MP1HM.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Barco 5MP1HM, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Barco 5MP1HM. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Barco 5MP1HM.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Barco 5MP1HM, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Barco 5MP1HM. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Barco 5MP1HM.

El manual de instrucciones completo de Barco debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Barco 5MP1HM - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Barco 5MP1HM, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Barco 5MP1HM que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Barco 5MP1HM - que deben facilitarnos los primeros pasos durante el uso de Barco 5MP1HM
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Barco 5MP1HM
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Barco 5MP1HM en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Barco 5MP1HM?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Barco 5MP1HM, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Barco 5MP1HM probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Comentarios (1)

Рустам

Когда идёт входящий вызов,то не срабатывает фунция приема звонка.