Manual de instrucciones Leica 18141

179 de páginas 0.9 mb
Descargar

Pasar a la página of 179

Summary
  • Leica 18141 - page 1

    LEICA CM Anleitung / Instructions /Instrucciones ...

  • Leica 18141 - page 2

    1 2 3 4 5 6 7 12 13 8 9 11 a 11 b 11 10 14 15 9 10 23 22 20 21 19 18 16 17 ...

  • Leica 18141 - page 3

    24 7 25 26 27 28 31 30 29 29 17 32 ...

  • Leica 18141 - page 4

    LEICA CM Anleitung English instructions pages 60 – 1 1 7 Instrucciones español páginas 1 18 – 1 7 5 ...

  • Leica 18141 - page 5

    2 Vo r wo r t Wir wünschen Ihnen viel Freude und Erfolg beim Fotografieren mit Ihrer neuen LEICA CM. Das lichtstark e Objektiv LEICA SUMMARIT 1:2,4/40 mm ermöglicht Ihnen mit seiner hohen op- tischen Leistung ausgezeichnet e Aufnahmequalität auch unter kritischen Lichtverhältnissen. Dank ihrer k ompakten Abmessun- gen passt die LEICA CM in nahe ...

  • Leica 18141 - page 6

    3 K urzbeschreibung Die LEICA CM ist eine elegante, k ompakte und vielseitige Klein- bild-Sucherkamera, die sich dank ihrer außerg ewöhnlichen Aus- stattung gleichermaßen für unbeschwer tes- wie auch für an- spruchsvolleres Fot ografieren eignet. Ihre besonderen Ausstat- tungsdetails sind: • LEICA SUMMARIT 1:2,4/40 mm Hochleistungsobjektiv ( ...

  • Leica 18141 - page 7

    4 Inhaltsverzeichnis V or wort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Kurzbeschreibung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Bezeichnung der T eile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Die Anzeigen im L CD-Datenfeld . . . . . . . . . . . . ...

  • Leica 18141 - page 8

    5 Die Betriebsarten mit manueller Blitz-Zuschaltung . . . . . . 39 (6) Fot ograf ieren mit manueller Blitz-Zuschaltung q . . . . . . . . . . . . . . . . . . . . . . . . . 39 (7) Fot ograf ieren mit manueller Blitz-Zuschaltung und V orlicht q t . . . . . . . . . . . . . 39 (8) Fot ograf ieren mit manueller Blitz-Zuschaltung und längeren V erschluss ...

  • Leica 18141 - page 9

    6 Bezeichnung der T eile 1 . Belichtungs-Messzelle 2. Autofok us-Sensoren 3. V orlicht zur V erringerung des „Rot e- Augen-Effekts“ und zur Anzeige der Selbstauslöser -Funktion 4. Sucherausblick 5. Blitzreflektor 6. Objektiv LEICA SUMMARIT 1:2,4/40 mm mit automatisch schließender Abdeckung 7 . Hauptschalter 8. Auslöser 9. Einstellrad für Au ...

  • Leica 18141 - page 10

    7 Die Anzeigen im L CD-Datenfeld (1 9) q Blitz manuell zugeschalte t u Blitz manuell abgeschalte t n Blitz-Synchronisation auf das Ende der Belichtungszeit S Längere V erschlusszeiten möglich t V orlicht zur V erringerung des „Rot e- Augen-Effekts“ E + - Belichtungsk orrektur eingestellt 8.8 Zif ferngruppe für: – Bildzählwerk – Zeitzäh ...

  • Leica 18141 - page 11

    8 Die Anzeigen im Sucher Durch LEDs (Light Emitting Diodes – Leuchtdioden, mit automa- tischer Helligk eitssteuerung, an die Außenhelligk eit angepasst) A. Vierstellige Siebensegment-Digitalanzeige mit Dezimalpunkt sowie darüber liegendem Punkt: • Angabe der automatisch g ebildeten, bzw . manuell vorgeg ebenen V erschlusszeiten- und/oder der ...

  • Leica 18141 - page 12

    9 Sicherheitshinw eise • Weist die Kamera Funktionsst örungen auf, versuchen Sie nicht diese eigenhändig zu reparieren. Als erste Maßnahme sollt en Sie die Batterie auswechseln. Sollte dies k einen Erfolg zeigen, bringen Sie die Kamera zu Ihrem Fachhändler , bzw. zu einem anderen entsprechenden Fachmann. • Machen Sie sich bitt e mit dem Geb ...

  • Leica 18141 - page 13

    10 Inbetriebnahme der LEIC A CM Einlegen und Herausnehmen der Batterie Die LEICA CM wird mit einer 3 V olt Lithium-Batt erie (z. B. Duracell DL1 23A , Kodak KL 1 23L A, Panasonic CR 1 23A, Varta CR1 23A, oder andere CR1 23-T ypen) bestückt, die sowohl die K amera als auch die Datier-Einrichtung mit Energie v ersorgt. 1 . Öf fnen Sie den Bajone tt ...

  • Leica 18141 - page 14

    11 Nach einer kurzen Pause, wenn sich die Batterie erholt hat, kann w eiter fotografiert werden. • Die Batteriek ontakte sollt en stets sauber g ehalten werden. • Befindet sich ein Film in der Kamera, sollten Sie gleich nach dem Herausnehmen der alten Batterie eine neue einleg en. • Kält e verringert die Batterieleistung. Außerdem wird der ...

  • Leica 18141 - page 15

    12 Hinweis: Zwecks V erlängerung der Batterie-Lebensdauer sollten Sie es sich trotz dieser Stand-b y Schaltung grundsätzlich zur Ge- wohnheit machen, die Kamera immer auszuschalten, wenn sie für längere Zeit nicht eingese tzt werden soll. Hat sich die Kamera in den Stand-by Zustand g eschaltet, k ann sie jederzeit durch eine der folgenden Maßn ...

  • Leica 18141 - page 16

    13 Hinweise: • Die Daten werden durch LEDs-(Light Emitting Diodes – Leucht- dioden) von vorne auf den Film belichte t. • Die Helligk eit der Einbelichtung wird durch die automatische Filmempfindlichkeits-Einst ellung (DX-Codierung) der Kamera gesteuert. Dennoch kann ihre Lesbark eit je nach ver wende- tem Film leicht variieren. Bei einig en g ...

  • Leica 18141 - page 17

    14 Bedienungsschritt 1 . Drücken Sie die D A TE-T aste (23) lange (mind. 2 s). 2. Drehen Sie das zentrale Einst ellrad (1 8) nach rechts (im Uhrzeigersinn), um den Wert zu erhöhen, oder nach links (gegen den Uhrzeigersinn), um ihn zu verringern. Hinweis: Die W erte sind in einer „Endlos-Schleife“ ange- ordnet, d. h. sie sind in beiden Drehric ...

  • Leica 18141 - page 18

    15 Wählen der einzubelichtenden Daten/der Datums-Reihenfolge Mit der DA TE-T aste (23) wählen Sie auch, ob, bzw . welche Daten ang ezeigt und auf Ihre Aufnahmen einbelichtet w erden sollen. Entsprechend den international unterschiedlichen Schreibw eisen erlaubt die LEIC A CM beim Datum vier unterschiedliche Darstel- lungen: Jahr/Monat/T ag – T ...

  • Leica 18141 - page 19

    16 Einlegen des Films Die automatische Filmeinfädelung k ann sowohl bei ein-, als auch bei ausgeschalte ter Kamera er folgen. Achtung: • Prüfen Sie bitte unbedingt vor dem Öffnen der Rückwand, ob in der Kamera ein noch nicht zurückgespulter Film liegt. An- dernfalls würde das einfallende Licht den bereits belichteten T eil des Films und dam ...

  • Leica 18141 - page 20

    17 Deutsch Bedienungsschritt 1 . Entriegeln und öffnen Sie die Rückwand (1 7) mit dem Schieber (1 3) auf der linken Kameraseite. Hinweis: Prüfen Sie bei dieser Geleg enheit, ob sich auf der hinteren Linse des Objektivs Staub befindet. Falls ja, sollt e er mit einem weichen Blasepinsel entfernt werden. 2. Legen Sie die Filmpatrone, wie in den Abb ...

  • Leica 18141 - page 21

    18 Bedienungsschritt (Fortsetzung) 4. Schließen Sie die Rückw and. Die Kamera schaltet sich da- raufhin ein (falls sie nicht schon vorher eingeschalt et war), fädelt den Film automatisch ein und transportier t ihn bis zum ersten Bild. Anzeigen im Datenfeld Bei k orrekt er folgender Einfädelung im Bildzählwerk: zu Beginn kurz 1 , während des A ...

  • Leica 18141 - page 22

    19 V erwendbare Kleinbildfilme Die LEICA CM ist eine Kleinbild-Kamera, d.h. sie wird mit Filmen des 35mm-Formats geladen. D X-k odier te Kleinbild-Filme (Film- packung und Filmpatrone sind mit „D X“ gek ennzeichnet) w erden von der Kamera automatisch eing estellt. D X-k odier te Filme außerhalb dieses Empfindlichk eitsbereichs, bzw . nicht cod ...

  • Leica 18141 - page 23

    20 Der Sucher/Die Anzeigen im Sucher Das Sucherbild der LEICA CM zeigt ca. 85 % des Bildfeldes. Im Sucher sind folgende Markierungen und Anzeig en zu sehen: a. Nahbereichs-Begrenzungen Bei Nahaufnahmen ist das Sucherbild gegenüber dem v om Objektiv er fassten Ausschnitt nach oben v ersetzt. Diese Parallaxe macht sich umso deutlicher bemerkbar , je ...

  • Leica 18141 - page 24

    21 Fotog rafieren mit der LEICA CM Die LEICA CM ist einerseits eine vollautomatische K amera. Sie unterstützt unbeschwertes, einfaches, sicheres und schnelles Fot ograf ieren durch die automatische Einst ellung der Entfernung und damit der Schär fe (Autofok us), durch die vollautomatische, programmgesteuerte Belichtung und, falls er forderlich, d ...

  • Leica 18141 - page 25

    22 Automatische Einstellung der Entfernung / A utofokus Für den Autofok us-Betrieb wird das Einstellrad (9) ganz nach rechts (d. h. im Uhrzeigersinn) gedreht, bis es in der AF -Position einrastet. Soll Ihr Hauptmotiv in der Bildmitt e angeordnet sein, richten Sie den Rahmen in der Suchermitte so auf das Motivt eil, das schar f abgebildet werden so ...

  • Leica 18141 - page 26

    23 Manuelle Einstellung der Entfernung Für die manuelle Einstellung wird das Einst ellrad (9) aus der ge- rastet en AF -Position nach links (d. h. geg en den Uhr zeigersinn) auf die gewünscht e Entfernung gedreht. Im Datenfeld (1 9) wird daraufhin anstelle des Datums die eingest ellte Entfernung ange- zeigt, z. B. 0.7 m , 23.0 m oder z (für unen ...

  • Leica 18141 - page 27

    24 Hinweise: • Die Anzeige im Sucher bezieht sich zu jedem Zeitpunkt auf das Motivt eil, das gerade vom Messfeld (dem Rahmen) erfasst wird. • Die Anzeige erlischt 1 2 s nach Freig eben des Auslösers, jede Betätigung des Einstellrades währenddessen verläng er t diese Zeit um weitere 4 s. Nach der Aufnahme erlischt die Anzeige sofort. Anzeige ...

  • Leica 18141 - page 28

    25 Die Belichtungssteuerung Die LEICA CM biet et Ihnen zwei Betriebsarten zur Steuerung der Belichtung, mit denen Sie die Kamera auf Ihre bev orzugte Arbeits- weise oder auf das jeweilig e Motiv einstellen k önnen. So können Sie wählen zwischen einer schnellen, bequemen und sicheren Pro- gramm-, d. h. V ollautomatik und einer Zeitautomatik für ...

  • Leica 18141 - page 29

    26 Programm-Shift Die variable Programmautomatik der LEICA CM v erbindet die Sicherheit und Schnelligk eit der vollaut omatischen Belichtungssteue- rung mit der Möglichk eit, jeder zeit die von der Kamera g ewählte Zeit/Blenden-K ombination den eigenen V orstellungen entsprechend variieren zu k önnen. Möchten Sie z. B. bei Spor taufnahmen die s ...

  • Leica 18141 - page 30

    27 Zeitautomatik Die Zeitautomatik regelt die V erschlusszeit automatisch passend zur manuell vorgeg ebenen Blende. So k önnen Sie z. B. sicher- stellen, dass mit dem ge wählten Blendenw er t die gewünscht e Schär fentiefe stets, d. h. auc h bei wechselnden Lichtverhältnis- sen erhalten bleibt. Zur Einstellung wählen Sie durch Drehen des Hebe ...

  • Leica 18141 - page 31

    28 Speichern von Schärfe und Belichtung Das Belichtungssteuerungs- und Messsyst em der LEICA CM ist mittenbet ont ausgelegt, d. h. es wird zwar das g esamte Bildfeld er fasst, der durch den Aut ofokus-Rahmen gek ennzeichnete Be- reich wird jedoch deutlich stärk er gewicht et. Mittig angeordnet e Motivteile w erden durch diese Auslegung in aller R ...

  • Leica 18141 - page 32

    29 Belichtungskor rekturen Belichtungsmesser sind auf Motive mittlerer Helligk eit geeicht, die durchsc hnittlich etwa 1 8 % des wirksamen Lichts reflektieren . Er- füllt das gemessene Motiv diese V oraussetzungen nicht, sollte eine angemessene Belichtungsk or rektur vorg enommen werden. Die LEICA CM ermöglicht Korrekturen im Bereich von ± 2 EV ...

  • Leica 18141 - page 33

    30 Beispiel für eine K orrektur nach + (entspricht einer Belichtungs-Zunahme) Bei Motiven mit sehr hellen dominant en Flächen, die sehr viel Licht reflektieren, z. B. mit Schnee oder am Strand, wählt der Be- lichtungsmesser eine relativ kurze Belichtungszeit und/oder kleine Blende. Der Schnee würde dadurch in einem mittleren Grau wiedergegeben, ...

  • Leica 18141 - page 34

    31 Wählbare Betriebsarten Die LEICA CM biet et 1 5 verschiedene Funktionsv arianten für den Blitzbetrieb an, einschließlich der Möglichk eit, jederzeit Langz eit- Belichtungen vorzunehmen. Dabei sind zusätzliche Funktionen in unt erschiedlichen Kombinationen zu praxisgerechten Be triebsar ten zusammengefasst. Diese Betriebsarten stehen so wohl ...

  • Leica 18141 - page 35

    32 Hinweis: Bei den Beschreibungen der Betriebsarten ist jeweils vermerkt, wenn sie nur über die „2. Einstell-Ebene“ ang ewählt werden k önnen (betrif ft die Nr . 3–5 und 8 – 1 4). Wichtig: Eingestellt e Betriebsarten bleiben aktiv, solang e k eine andere angew ählt wird. Wird die Kamera dagegen abgeschalt et oder schaltet sie sich selb ...

  • Leica 18141 - page 36

    33 3. Das Blitzgerät muss auf A oder M eingest ellt werden. Bei M muss die T eillicht-Leistung durch Leitzahlrechnung er mit- telt und manuell am Blitzgerät eing estellt werden. Bei A müssen die Blendeneinstellungen an K amera und Blitzgerät übereinstimmen. • Für indirektes Blitzen (geschw enkter oder geneigt er Blitz- reflektor) muss das B ...

  • Leica 18141 - page 37

    34 Die Betriebsarten mit automatischer Blitz-Zuschaltung Mit diesen Betriebsarten schaltet sich das Blitzg erät immer dann selbsttätig dazu, wenn bei schlechten Lichtverhältnissen F reihand- Aufnahmen durch längere Belichtungszeit en zu V er wacklungen führen k önnten, wie z. B. in dunklen Innenräumen, draußen in der Däm- merung oder bei s ...

  • Leica 18141 - page 38

    35 (2) Fotog rafieren mit automatischer Blitz-Zuschaltung und V orlicht t Bei geblitzten P or trait- und Gruppenaufnahmen kann es zu „Ro ten Aug en“ k ommen, wenn das Blitzlicht von der Netzhaut der Aug en direkt zur Kamera reflektier t wird. Die zu fotografierenden Personen sollten deshalb möglichst nicht direkt in die Kamera blick en. Da die ...

  • Leica 18141 - page 39

    36 (3) Fotog rafieren mit automatischer Blitz-Zuschaltung und längeren V erschlusszeiten S (nur über die „2. Einstell-Ebene“ anw ählbar , siehe „Wählbare Betriebsarten“, S. 3 1) Um das V er wacklungsrisik o zu minimieren, wird die Belichtungszeit bei den Betriebsarten mit Blitz-Zuschaltung nicht über 1 / 60 s hin- aus verlängert. Desh ...

  • Leica 18141 - page 40

    37 (4) Fotog rafieren mit automatischer Blitz-Zuschaltung, längeren V erschlusszeiten und V orlicht S t (nur über die „2. Einstell-Ebene“ anw ählbar , siehe „Wählbare Betriebsarten“, S. 3 1) Diese Betriebsart erlaubt es Ihnen, die Funktionen der Betriebsarten Nr . 2 und 3 k ombiniert einzusetzen. Hinweis: Bei wenig Licht, d. h. längere ...

  • Leica 18141 - page 41

    38 (5) Fotog rafieren mit automatischer Blitz-Zuschaltung, Blitz-Synchronisation auf das Ende der Belichtungszeit und längeren V erschlusszeiten nS (nur über die „2. Einstell-Ebene“ anw ählbar , siehe „Wählbare Betriebsarten“, S. 3 1) Die LEICA CM erlaubt es, die Zündung des Blitzes wahlweise auf den Beginn oder das Ende der Belichtung ...

  • Leica 18141 - page 42

    39 Die Betriebsarten mit manueller Blitz-Zuschaltung Wie im Abschnitt „Die Betriebsarten mit automatischer Blitz-Zusc haltung“ auf S. 34 beschrieben, schalte t die LEICA CM den Blitz auch in Gegenlichtsituationen automatisch dazu. Soll allerdings das dunklere Mo tivteil aus bildgestalt erischen Gründen nicht in der Bild- mitte angeordne t werd ...

  • Leica 18141 - page 43

    40 (8) Fotog rafieren mit manueller Blitz-Zuschaltung und längeren V erschlusszeiten q S (nur über die „2. Einstell-Ebene“ anw ählbar , siehe „Wählbare Betriebsarten“, S. 3 1) Hinweis: Bei wenig Licht, d. h. längeren V erschlusszeiten als 1 / 60 s, sollte die Kamera ruhig gehalt en-, aufgestützt- oder ein Stativ verwendet werden. Die ...

  • Leica 18141 - page 44

    41 (9) Fotog rafieren mit manueller Blitz-Zuschaltung, läng eren V erschlusszeiten und V orlicht q S t (nur über die „2. Einstell-Ebene“ anw ählbar , siehe „Wählbare Betriebsarten“, S. 3 1) Hinweis: Bei wenig Licht, d. h. längeren V erschlusszeiten als 1 / 60 s, sollte die Kamera ruhig gehalt en-, aufgestützt- oder ein Stativ verwende ...

  • Leica 18141 - page 45

    42 (1 0) Fot ografieren mit manueller Blitz-Zuschaltung, Blitz-Synchronisation auf das Ende der Belichtungszeit und längeren V erschlusszeiten q nS (nur über die „2. Einstell-Ebene“ anw ählbar , siehe „Wählbare Betriebsarten“, S. 3 1) Hinweis: Bei wenig Licht, d. h. längeren V erschlusszeiten als 1 / 60 s, sollte die Kamera ruhig gehal ...

  • Leica 18141 - page 46

    43 Fotog rafieren mit manuell gesteuerten Langzeit- Aufnahmen Bestimmte Motiv e, wie z. B. Gewitter , nächtliche Straßenszenen oder Feuer werk e, entwick eln erst bei Aufnahmen mit längeren Be- lichtungen ihren vollen R eiz. Für absolut verwacklungsfreie lange Belichtungen, z. B. in V erbindung mit Stativ und elektrischem Kabelauslöser , biete ...

  • Leica 18141 - page 47

    44 (1 1) Fot ografieren mit manueller Blitz-Zuschaltung und der T-F unktion q T (nur über die „2. Einstell-Ebene“ anw ählbar , siehe „Wählbare Betriebsarten“, S. 3 1) Das Einstellen/Die Anzeigen Bedienungsschritt 1 . Beim Einstellen der Funktion 2. Nach Einstellen der Funktion/beim Betätigen des A us- lösers (mindestens bis zum Druckpu ...

  • Leica 18141 - page 48

    45 (1 2) Fotografieren mit manueller Blitz-Zuschaltung, V orlicht und der T-F unktion q t T (nur über die „2. Einstell-Ebene“ anw ählbar , siehe „Wählbare Betriebsarten“, S. 3 1) Deutsch Das Einstellen/Die Anzeigen Bedienungsschritt 1 . Beim Einstellen der Funktion 2. Nach Einstellen der Funktion/beim Betätigen des A us- lösers (mindes ...

  • Leica 18141 - page 49

    46 (1 3) Fotografieren mit manueller Blitz-Zuschaltung, Blitz-Synchronisation auf das Ende der Belichtungszeit und der T-F unktion q n T (nur über die „2. Einstell-Ebene“ anw ählbar , siehe „Wählbare Betriebsarten“, S. 3 1) Das Einstellen/Die Anzeigen Bedienungsschritt 1 . Beim Einstellen der Funktion 2. Nach Einstellen der Funktion/beim ...

  • Leica 18141 - page 50

    47 (1 4) Fotografieren mit manueller Blitz-Abschaltung und der T-Funktion u T (nur über die „2. Einstell-Ebene“ anw ählbar , siehe „Wählbare Betriebsarten“, S. 3 1) Deutsch Das Einstellen/Die Anzeigen Bedienungsschritt 1 . Beim Einstellen der Funktion 2. Nach Einstellen der Funktion/beim Betätigen des A us- lösers (mindestens bis zum D ...

  • Leica 18141 - page 51

    48 (1 5) Fotografieren mit manueller Blitz-Abschaltung u Durch bewusstes Abschalt en des Blitzes lassen sich z. B. stimmungsvolle Szenen in der Dämmerung oder in Innenräumen festhalten oder es kann in Museen fo tografier t werden, in denen der Blitzeinsatz nicht erlaubt ist. Auch in dieser Betriebsart steuert das Umge- bungslicht die V erschlussz ...

  • Leica 18141 - page 52

    49 Die selbständig sich einstellende B-Funktion In den Betriebsarten S (3), S t (4), nS (5), q S (8), q S t (9), q nS (1 0) und u (1 5) schalte t die Kamera un- terhalb einer bestimmt en Helligkeitsschw elle automatisch auf Langzeit-Belichtung um. Im Datenfeld (1 9) erscheint bei halb ge- drücktem Auslöser daraufhin zusätzlich die Anzeig e B . ...

  • Leica 18141 - page 53

    50 Speichern der Blitz-Betriebsarten/der eing estellten Belichtungsk orrektur Unter Umständen, bzw . bei einigen Motiv en kann es angebracht sein, grundsätzlich mit bestimmt en Funktionen der LEICA CM zu ar- beiten. So soll vielleicht eine Portrait-Reihe immer mit V orlicht-, oder eine Reihe von Landschaftsaufnahmen für eine Multivisi on mit fes ...

  • Leica 18141 - page 54

    51 Der Selbstauslöser Die LEICA CM biet et die Wahl zwischen 2 und 1 0 s Vorlaufzeit für den Selbstauslöser -Betrieb, z. B. für Aufnahmen, auf denen Sie m it im Bild erscheinen möchten, oder um jegliche V er wacklung durch die Betätigung des A uslösers zu vermeiden. Deutsch Bedienungsschritt 1 . Drück en Sie die TIMER-T aste (20) 2. St elle ...

  • Leica 18141 - page 55

    52 Hinweise: • Der Selbstauslöser ist immer nur für eine Aufnahme aktiviert, d. h. er muss er neut eingest ellt werden, falls er danach noch einmal eingesetzt w erden soll. • Falls das Blitzg erät beim Betätigen der TIMER-T aste noch nicht aufgeladen ist – das Symbol im Sucher blinkt – k ann der Selbst - auslöser nicht aktivier t werde ...

  • Leica 18141 - page 56

    53 Automatische Rück spulung des belichteten Films Nach der letzten A ufnahme, am Filmende, beginnt automatisch die Filmrückspulung. Das Bildzählw erk im Datenfeld (1 9), zählt dabei rückwärts mit, wobei abwechselnd die Bildnummern und zurücklaufende Segmente als Rück spul-Bestätigung erscheinen. Nach beendeter R ückspulung st oppt der Mo ...

  • Leica 18141 - page 57

    54 W as tun, wenn . . . Fehler Ursache Abhilfe Kamera löst nicht aus Kamera ist nicht eingeschalte t Kamera einschalten (s. S. 1 1) Batterie ist leer Batterien auswechseln (s. S. 1 0) Batteriek ontakte v erschmutzt Batterie-K ontakte säubern Blitz lädt nach Kurze Zeit warten, bis der Blitz aufgeladen hat. (s. S. 58) Externes Blitzgerät ist nich ...

  • Leica 18141 - page 58

    55 Fehler Ursache Abhilfe Hauptobjekt nicht scharf Autofok us-Sensoren abgedeckt Hände, T ragriemen u. ä. fernhalten Objektabstand zu gering Objektabstand muss mindestens 0,7 m betragen Hauptobjekt nicht innerhalb Schär fespeicherung benutzen (s. S. 28) des Autofok us-Rahmens Ungünstige Scharfeinstell-Bedingungen, Schärfespeicherung auf Er sat ...

  • Leica 18141 - page 59

    56 Tipps zur Pflege der LEICA CM Staub auf der Außenlinse des Objektivs wird mit einem weichen Haarpinsel oder einem sauberen, trock enen, fusselfreien wei- chen Lappen, z. B. ein sauberes Baumwoll- T aschentuch oder ap- preturfreies Finette, entfernt. Es ist darauf zu achten, dass der T eil des Baumwolltuchs, der zum T rock enwischen benutzt wird ...

  • Leica 18141 - page 60

    57 T echnische Daten Typ Kompakte Aut ofokus-Kleinbildsucherkamera mit lichtstark em, leicht weit- winkligem Normalobjektiv . Filmformat 2 4x3 6m m Objektiv LEICA SUMMARIT 1:2,4/40 mm, (6 Linsen in 4 Gruppen) mit verbesser- ter Mehrschichtvergütung. Entfernungs-Einstellbereich Automatische oder manuelle Entfernungseinst el- lung von 70 cm bis unen ...

  • Leica 18141 - page 61

    58 Blitzbereich (b. ISO 1 00/2 1°) von 0,7– 5,8 m. Leitzahl 14. Blitzfolgezeit Ca. 6 Sekunden mit frischer Batt erie. Filmempfindlichkeits-Einstellung Aut omatische Filmempfindlichkeits-Einstellung für DX-k odierte Filme von ISO 25/1 5° bis 5000/38°. Bei Filmen ohne D X-Code, bzw. mit D X-Code und Empfindlichkeit en außerhalb dieses Bereichs ...

  • Leica 18141 - page 62

    59 Leica Akademie Neben anspruchsvollen Produkten der Höchstleistungsklasse von der Beobachtung bis zur Wiedergabe bieten wir als beson- deren Ser vice seit vielen Jahren in der Leica Akademie praxisg e- rechte Seminare und Schulungen an, in denen das Wissen um die Welt der Fo tografie , der Projektion und der V ergrößerung sowohl Anfängern als ...

  • Leica 18141 - page 63

    60 Foreword We wish y ou a great deal of pleasure and success using your new LEICA CM. The ex cellent optical perfor mance of the fast LEICA SUMMARIT 40 mm f/2.4 lens enables you t o achieve outstanding picture quality even under critical lighting conditions. Its compact size means the LEICA CM fits into almost an y pocke t, making it your constant ...

  • Leica 18141 - page 64

    61 Brief description The LEICA CM is a stylish, compact and versatile 35 mm viewfind - er camera with ex ceptional features, making it ideally suited for both uncomplicat ed and more demanding photography . Its spe- cial features are: • LEICA SUMMARIT 40 mm f/2.4 high-perfor mance lens (6 lenses in 4 groups) • Titanium housing • Distance rang ...

  • Leica 18141 - page 65

    62 Contents Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Brief description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Designation of par ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Displays in the L CD data panel . . . . . . . . . . . . . . . . . ...

  • Leica 18141 - page 66

    63 Modes with manual flash activation 97 (6) T aking photographs with manual flash activation q . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 7 (7) T aking photographs with manual flash activation and pre-flash light q t . . . . . . . . . 9 7 (8) T aking photographs with manual flash activation and slower shutt er speeds q S . . . . . . . ...

  • Leica 18141 - page 67

    64 Designation of parts 1 . Exposure metering cell 2. Autofocus sensors 3. Pre-flash light for reduction of “red eye effect” and for signaling self timer function 4. Viewfinder window 5. Flash reflector 6. LEICA SUMMARIT 40 mm f/2.4 lens with aut omatically closing cover 7 . Main switch 8. Shutter release button 9. Adjustment dial for autofocus ...

  • Leica 18141 - page 68

    65 Display s in the LCD data panel (1 9) q Manual flash on u Manual flash of f n Flash synchronisation with the end of the e xposure S Slower shutt er speeds possible t Pre-flash light for reduction of “red eye effect” E + - Exposure compensation set 8.8 Numerical display for: – F rame counter – Timer for long time exposures and count-down ...

  • Leica 18141 - page 69

    66 Viewfinder displa ys LEDs (Light Emitting Diodes, with automatic brightness control, adapted t o the ext ernal brightness) A. Four-digit, se ven-segment digital display with de- cimal point and point above: • Specifies the automatically generat ed or manually set shutter speeds and/or the aut omatically generated aper- ture values • (flashin ...

  • Leica 18141 - page 70

    67 Safety instructions • If the camera sho ws any sign of malfunction, do not try to re- pair it yourself. Y our f irst step should be to chang e the battery. If this is unsuccessful, return the camera to y our specialist dealer or to anot her photographic specialist. • Please ensure that you are fully conv ersant with the operation and functio ...

  • Leica 18141 - page 71

    68 Preparing the LEICA CM for use Inserting and removing the battery The LEICA CM tak es a 3 volt lithium batt er y (e.g. Duracell DL1 23A , Kodak KL 1 23L A, Panasonic CR 1 23A, Varta CR1 23A or other CR1 23 types). This supplies both the camera and the dat e printer with po wer . 1 . Open the bay onet catch on the battery compar tment cover (unde ...

  • Leica 18141 - page 72

    69 • If there is a film in the camera, you should insert a new batter y immediately after removing the old one. • Cold conditions impair the battery per formance. The f ilm also becomes stif fer , making it harder to wind. Therefore, at lo w temperatures the LEICA CM should be k ept as close to the body as possible and a new battery should be i ...

  • Leica 18141 - page 73

    70 If the camera has switched to standby mode, y ou can re-activate it at any time in one of the following w ays: • T ur n it of f and back on using the ON/OFF switch • Press the TIMER button (20). • Press the EV button (2 1). • Press the MODE button (22). • T ap or press the shutter release (3) Note: The camera automatically selects the ...

  • Leica 18141 - page 74

    71 Notes: • The data is imprinted on the film from the front by LEDs (Light Emitting Diodes). • The brightness of the imprint is controlled by the camera’s au- tomatic film speed setting (D X coding). Even so, there can be slight variations in legibility depending on the film used. With cer tain low speed films, the imprint is only very faint ...

  • Leica 18141 - page 75

    72 Operating step 1 . Press and hold down t he DA TE button (23) (min. 2 s). 2. T urn the main control dial (1 8) to the right (clockwise) t o in- crease the value or t o the lef t (anticlockwise) to reduce it. Note: The values are arranged in an “endless loop”, i. e. they can be reached b y turning the dial in either direction (from 4 to 6 ). ...

  • Leica 18141 - page 76

    73 Selecting the data to be imprinted/the date sequence Y ou can also use the DA TE button (23) to select whether or which data is t o be displayed and imprint ed on your pictures. T o take account of different international conventions, the LEICA CM allo ws four dif ferent options for displaying the dat e: Y ear/Month/Day – Day/Month/Y ear – Y ...

  • Leica 18141 - page 77

    74 Loading the film Automatic film loading is possible with the camera switched bot h on and of f. W arning: • Before opening the back cov er , please ensure that the film has been completely w ound back into the cartridge. Other wise, the light will damage the part of the film already exposed and with it many of the sho ts already tak en. The ca ...

  • Leica 18141 - page 78

    75 Operating step 1 . Using the slider (1 3) on the left of the camera, release and open the back cover (1 7). Note: T ake t his oppor tunity to check whether t here is any dust on the rear lens element. If so, it should be remov ed with a soft brush. 2. Place the f ilm car tridge in the film cartridge compar tment (3 1) as shown. The sprung spindl ...

  • Leica 18141 - page 79

    76 Operating step (cont.) 4. Close the back cover . The camera switches itself on (if it was not switched on before), threads t he film automatically onto the tak e-up spool and advances it to the first fr ame. Display s in the data panel In frame counter for correct loading: Initially briefly 1 , during the process two alternately flashing lines, ...

  • Leica 18141 - page 80

    77 Compatible 35mm films The LEICA CM is a 35 mm camera, i. e. it tak es 35 mm format films. DX coded 35 mm f ilms (film packaging and film car tridge are mark ed with “D X”) are automatically set b y the camera. D X coded f ilms outside this speed range and non-D X coded films are set to ISO 1 00. If the camera cannot det ect the DX code for t ...

  • Leica 18141 - page 81

    78 The viewfinder/Viewfinder displa ys The viewfinder image in the LEICA CM sho ws approx. 85 % of the image field. The following markings and displays can be seen in the viewfinder: a. Close range marks For close range shots, what y ou see in the viewfinder is par tly above of what t he lens records. This parallax fault becomes in- creasingly noti ...

  • Leica 18141 - page 82

    79 T aking photographs with the LEICA CM The LEICA CM is a fully automatic camera. With aut omatic set- ting of the distance and therefore the focus (aut ofocus), fully automatic, programmed exposure control and, if required, aut o- matically activated flash, it is ideal for uncomplicated, reliable and quick photograph y . When the camera is switch ...

  • Leica 18141 - page 83

    80 Automatic distance se tting/Autofocus For autofocus mode, the adjustment dial (9) is turned complet e- ly to the right (i.e. clockwise) until it engag es in the AF position. If the main subject is supposed to be in the cent er of your picture, point the frame in the center of the vie wfinder at the par t of the subject you want t o be in focus, ...

  • Leica 18141 - page 84

    81 Manual distance setting For manual setting, the adjustment dial (9) is turned to t he lef t (i.e. anticlockwise) from the AF position to the desired distance. In the data panel (1 9), the set distance is then display ed instead of the date, e.g. 0.7 m , 23.0 m or z (for infinity). Operating step 1 . T ur n on the focusing system and the correspo ...

  • Leica 18141 - page 85

    82 Notes: • At all times, the display in the vie wf inder relates t o the part of the subject that is currently being recorded within the me tering field (frame). • The display disappears 1 2 s af ter releasing t he shutter release, with each mov ement of the adjustment dial during this time ex t end- ing the time by a further 4 s. The display ...

  • Leica 18141 - page 86

    83 Exposure control The LEICA CM offer s you a choice of two modes for controlling t he exposure, which you can use t o adjust the camera per fectly to your preferred working met hod or the relevant subject. Y ou can choose between fast, convenient and reliable program mode, i.e. ful- ly automatic, and aperture priority mode, for easy specif icatio ...

  • Leica 18141 - page 87

    84 Program shift The LEICA CM’s v ariable programmed automatic exposure control mode combines the security and speed of fully aut omatic expo sure control with the freedom to adjust t he speed/aper ture combination selected b y the camera to your own preferences at an y time. For example, t o achieve sharp reproduction of an athlet e in spor ts p ...

  • Leica 18141 - page 88

    85 Aperture priority exposure control mode Aper ture priority mode automatically adjusts t he shutter speed to the manually se t aper ture. This allows you t o ensure that the desired depth of field selected by se tting the aper ture value is al- way s retained, i.e. even if the lighting conditions chang e. T o make the se tting, select the desired ...

  • Leica 18141 - page 89

    86 Storing focus and e xposure settings The exposure control and met ering system in the LEIC A CM is center weight ed, i.e. the entire image field is recorded but the area mark ed by the aut ofocus frame is given a significantly great- er weighting. This design means that the parts of the subject po- sitioned in the center are normally in focus an ...

  • Leica 18141 - page 90

    87 Exposure compensation Exposure meters are calibrated t o subjects with average brightness, i.e. which, on a verage, reflect around 1 8 % of the incident light. If the met ered subject does not meet these requirements, an appropriate e xposure compensation is necessar y . The LEICA CM allows compensation in the range ± 2 EV in increments of 1 / ...

  • Leica 18141 - page 91

    88 Example of a + compensation (corresponds to an increase in exposure) For subjects with very bright dominant sur faces, which reflect a great deal of light, e.g. snow or a beach, the e xposure meter se- lects a shutter speed that w ould be too fast and/or an aperture that would be t oo small. As a result, the snow would show up in a mid-gray and ...

  • Leica 18141 - page 92

    89 Selectable modes The LEICA CM offer s 1 5 dif ferent function variations for flash mode, including the option of making long time exposures at any time. V arious combinations of additional functions are combined into practical modes. These modes are available for bo th aperture pri ori- ty and programmed automatic exposure control mode. The 5 mo ...

  • Leica 18141 - page 93

    90 Note: The descriptions of each of the modes indicat e whether they can only be select ed using the “2nd setting level” (applies t o No. 3 – 5 and 8 – 1 4). Important : Once selected, a mode remains active until y ou select another one. If, on the o ther hand, the camera is switched of f or switches itself of f, the default setting is act ...

  • Leica 18141 - page 94

    91 3. The flash unit must be set to A or M . For M , the reduced power output must be det ermined by guide number calcu- lation and set manually on the flash unit. For A , the aperture settings on the camera and the flash unit must be the same. • For indirect flash (rotated or tilt ed flash reflector), the flash unit must be set to A mode. • Do ...

  • Leica 18141 - page 95

    92 Modes with automatic flash activ ation In these modes, the flash is alway s activated automatically when, because of poor lighting conditions, long e xposure times on f ree- hand shots could lead to blurring, for e xample, in a dimly lit room and outdoors, at twilight or in poor weather . The flash is also activated aut omatically when the meter ...

  • Leica 18141 - page 96

    93 (2) T aking photographs with automatic flash activ ation and pre-flash light t When taking por trait and group phot os the “red eye“ effect caused by light from the flash reflecting of f the cornea straight ba ck to the camera can occur . It is therefore best if the people being pho tographed do not look straight at the camera. As the effect ...

  • Leica 18141 - page 97

    94 (3) T aking photographs with automatic flash activ ation and slower shutter speeds S (can only be selected using “2nd setting le vel”, see “Selectable modes”, p. 89) T o minimize the risk of blurring, the exposure time is not ext ended beyond 1 / 60 s in the modes with flash activation. For pictures where the flash is used, this means th ...

  • Leica 18141 - page 98

    95 (4) T aking photographs with automatic flash activ ation, slower shutter speeds and pre-flash light S t (can only be selected using “2nd setting le vel”, see “Selectable modes”, p. 89) This mode allows you t o use the functions of modes 2 and 3 in combination. Note: With low light, i. e. slower shutter speeds than 1 / 60 s, the camera sh ...

  • Leica 18141 - page 99

    96 (5) T aking photographs with automatic flash activ ation, flash synchronization with the end of the exposure, and slower shutter speeds nS (can only be selected using “2nd setting le vel”, see “Selectable modes”, p. 89) The LEICA CM allows y ou to synchronize firing of the flash either with the beginning or the end of the e xposure time. ...

  • Leica 18141 - page 100

    97 Modes with manual flash activation As described in the section “Modes with automatic flash activation” on p. 92, t he LEICA CM automatically activat es the flash in back- light situations. Howev er , if the dark er part of the subject is not to be positioned in the center of t he picture for compositi on reasons, the built-in flash unit will ...

  • Leica 18141 - page 101

    98 (8) T aking photographs with manual flash activation and slo wer shutter speeds q S (can only be selected using “2nd setting le vel”, see “Selectable modes”, p. 89) Note: With low light, i. e. slower shutt er speeds than 1 / 60 s, the camera should be held steady , supported, or a tripod used. Even after the flash, the camera should only ...

  • Leica 18141 - page 102

    99 (9) T aking photographs manual flash activation, slo wer shutter speeds and pre-flash light q S t (can only be selected using “2nd setting le vel”, see “Selectable modes”, p. 89) Note: With low light, i. e. slower shutt er speeds than 1 / 60 s, the camera should be held steady , supported, or a tripod used. Even after the flash, the came ...

  • Leica 18141 - page 103

    100 (1 0) T aking photographs with manual flash activ ation, flash synchronization with the end of the exposure, and slower shutter speeds q nS (can only be selected using “2nd setting le vel”, see “Selectable modes”, p. 89) Note: With low light, i. e. slower shutt er speeds than 1 / 60 s, the camera should be held steady , supported, or a ...

  • Leica 18141 - page 104

    101 T aking photographs with manually controlled long-time e xposures Cer tain subjects, e.g. thunderstorms, street scenes at night or firework s only develop t heir full appeal in pictures with longe r expo- sures. For perfectly blur-free long exposures, e.g. when used in conjunction with tripod and electric cable release, the T functions a re ide ...

  • Leica 18141 - page 105

    102 (1 1) T aking photographs with manual flash activ ation and the T function q T (can only be selected using “2nd setting le vel”, see “Selectable modes”, p. 89) Setting/Displa ys Operating step 1 . When setting the function 2. After setting the function/when pressing the shutter release button (at least to the pressure point) 3. During t ...

  • Leica 18141 - page 106

    103 (1 2) T aking photogr aphs with manual flash activation, pre-flash light and the T function q t T (can only be selected using “2nd setting le vel”, see “Selectable modes”, p. 89) Setting/Displa ys Operating step 1 . When setting the function 2. After setting the function/when pressing the shutter release button (at least to the pressure ...

  • Leica 18141 - page 107

    104 (1 3) T aking photographs with manual flash activ ation, flash synchronization with the end of the exposure, and the T function q n T (can only be selected using “2nd setting le vel”, see “Selectable modes”, p. 89) Setting/Displa ys Operating step 1 . When setting the function 2. After setting the function/when pressing the shutter rele ...

  • Leica 18141 - page 108

    105 (1 4) T aking photographs with manual flash off and the T function u T (can only be selected using “2nd setting le vel”, see “Selectable modes”, p. 89) Setting/Displa ys Operating step 1 . When setting the function 2. After setting the function/when pressing the shutter release button (at least to the pressure point) 3. During the expos ...

  • Leica 18141 - page 109

    106 (1 5) T aking photographs with manual flash off u Deliberately switching off the flash allows you to tak e atmospheric phot ographs in the twilight and inside buildings for exampl e, or you can tak e phot ographs in museums where the use of flash is prohibited. In this mode, the ambient light controls the shutt er speeds, even as far as long ti ...

  • Leica 18141 - page 110

    107 The automatically self-activ ating B function In the modes S (No. 3), S t (No. 4), nS (No. 5), q S (No. 8), q S t (No. 9), q nS (No. 1 0) and u (No. 1 5) the camera automatically switches t o long time exposure below a par ticular brightness threshold. When the shutt er release but- ton is pressed halfwa y , B is then also displayed in the data ...

  • Leica 18141 - page 111

    108 Storing flash modes/the set e xposure compensation Under cer tain circumstances or for particular subjects, it can be appropriate to alwa ys use par ticular functions of the LEICA C M. Fo r example, this might be t he case if a series of por traits are always t o be tak en with pre-flash light or a series of landscape p hotographs for a multivi ...

  • Leica 18141 - page 112

    109 Self timer The LEICA CM offer s a choice between a 2 and 1 0 s lead time for self timer mode, e.g. when you want to appear in the picture y ou r- self or to prev ent any blurring resulting from pressing the shutter release. Operating step 1 . Press the TIMER button (20) 2. Set the desired dela y time by turning the main control dial (1 8). Note ...

  • Leica 18141 - page 113

    110 Notes: • The self timer is always only activ ated for a single picture, i.e. it must be set again if y ou want to use it again after ward s. • If the flash is not ye t charged up when the TIMER button is pressed – the symbol in the viewfinder is flashing – the self tim er can- not be activat ed. Important : Please note t hat the exposur ...

  • Leica 18141 - page 114

    111 Automatic re wind of fully exposed film The film star ts to rewind aut omatically af ter the last e xposure at the end of the film. The frame counter in the data panel (1 9) counts backwards, with the frame numbers and segments run- ning backwards as confirmation of rewinding appearing alter- nately . The mot or stops when the film is rewound. ...

  • Leica 18141 - page 115

    112 T roubleshooting Problem Cause Remedy Camera will not tak e a picture Camera is not switched on Switch the camera on (see p. 69) Battery is f lat Replace the batt er y (see p. 68) Battery contacts dir ty Clean battery contacts Flash is recharging Wait for a short while until the flash has charged up (see p. 1 1 6) External flash unit is not Pos ...

  • Leica 18141 - page 116

    113 Problem Cause Remedy Main subject out of focus Autofocus sensors covered Keep hands, carrying strap etc. clear Subject too close Distance to subject must be at least 0.7 m Main object outside autofocus frame Use focus memor y (see p. 86) Unfavorable focusing conditions, Focus on substitute objects at the same e.g. bright light sources in pictur ...

  • Leica 18141 - page 117

    114 Care tips for the LEICA CM Dust on the outside surface of the lens can be removed using a soft br ush or a clean, dr y , lint-free cloth, e.g. a clean cott on hand- k erchief or unfinished lens cleaning cloth. It must be ensured that the part of the cotton clot h used for wiping the lens is not touched beforehand. This is the only sure w ay to ...

  • Leica 18141 - page 118

    115 T echnical data Type Compact autofocus 35 mm viewf inder camera with fast, slightly wide angle normal lens. Film format 2 4x3 6m m Lens LEICA SUMMARIT 40 mm f/2.4 (6 lens elements in 4 groups) with improved multicoating Distance setting range Automatic or manual distance setting from 0.7 m to infin- ity, LED displa y of focus status in each mod ...

  • Leica 18141 - page 119

    116 Viewfinder Real imag e viewfinder with markings for distance metering field and the range of the maximum met ering sensitivity for exposure metering. Diopt er cor- rection +1 to –3 diopters. Viewfinder display s Three-part LED chain as status indication for distance me- tering, four-digit se ven-segment digital LED display for automatically o ...

  • Leica 18141 - page 120

    117 Leica Academ y As well as outstanding high-perfor mance products for taking, reproducing and viewing phot ographs, for many years we hav e also been of fering the special services of the Leica Akademie, with practical seminars and training cour ses, which are intended to share our knowledg e about the world of phot ography , projection and magn ...

  • Leica 18141 - page 121

    118 Prólogo Deseamos que disfrute y tenga mucho éxit o fotografiando con su nueva LEIC A CM. El objetivo LEICA SUMMARIT 1:2,4/40 mm, de intensa luminosidad, le permitirá obtener , con su gr an rendi- miento óptico, una e xcelente calidad de t oma incluso bajo con- diciones luminosas críticas. Gracias a sus medidas compactas, la LEICA CM cabe e ...

  • Leica 18141 - page 122

    119 Descripción brev e La LEICA CM es una cámara de visor de pequeño formato ele- gante, compacta y v ersátil, que, gr acias a su ex cepcional equi- pamiento, puede utilizarse en la misma medida tanto para una fotografía sencilla como para un fot ógrafo con más exigencias. Sus principales características detalladas son: • Objetivo de alt ...

  • Leica 18141 - page 123

    120 Índice Prólogo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 18 Descripción breve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 19 Designación de los componentes . . . . . . . . . . . . . . . . . . . . 1 22 Las indicaciones en el panel de datos L CD . . . . . . . . . . . . . 1 23 L ...

  • Leica 18141 - page 124

    121 Los modos de funcionamiento con activación manual del flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 55 (6) Fot ograf iar con activación manual del flash q . . . . 1 55 (7) Fot ograf iar con activación manual del flash y destello previo q t . . . . . . . . . . . . . . . . . . . . . . . . 1 55 (8) Fot ograf iar con acti ...

  • Leica 18141 - page 125

    122 Designación de los componentes 1 . Célula de medición de la exposición 2. Sensores de autofoco 3. Destello previo para evitar el «efect o de los ojos rojos» y para la indicación de la función de disparador automático 4. V entanilla del visor 5. Reflector del flash 6. Objetivo LEIC A SUMMARIT 1:2,4/40 mm con tapa de cierre automático 7 ...

  • Leica 18141 - page 126

    123 Las indicaciones en el panel de datos LCD (1 9) q Flash activado manualmente u Flash desactivado manualmente n Sincronización de flash al final del tiempo de exposición S Posibilidad de velocidades de obturación más lentas t Destello previo para reducir el «efect o de los ojos rojos» E + - Compensación de la exposición a justada 8.8 Gru ...

  • Leica 18141 - page 127

    124 Las indicaciones en el visor Mediante LEDs (Light Emitting Diodes – diodos luminiscentes, con control automático de luminosidad, adaptado a la claridad ext erior) A. indicación digital de siete segment os de cuatro posiciones con coma decimal, así como un punto situado por encima: • indicación de los valores de diafragma formados au- to ...

  • Leica 18141 - page 128

    125 Indicaciones de seguridad • Si la cámara presenta anomalías de funcionamient o no inten- te hacer reparaciones usted mismo. Como primera medida debería cambiar la pila. Si con esto no se soluciona el problema, llev e la cámara a su proveedor o a o tro especialista del ramo. • Familiarícese al máximo con el uso y las funciones de su nu ...

  • Leica 18141 - page 129

    126 Puesta en funcionamiento de la LEICA CM Colocación y extracción de la pila La LEICA CM funciona con una pila de litio de 3 voltios (p. ej. Duracell DL1 23A, Kodak KL 1 23L A, Panasonic CR 1 23A, Varta CR1 23A , u otros tipos CR1 23) que suministr a energía tanto a la cámara como al dispositivo fechador . 1 . Abra el cierre de la bayoneta de ...

  • Leica 18141 - page 130

    127 Después de una breve pausa puede continuar fo tografiando, una vez que se hay a recuperado la pila. • Los contactos de la pila deberían mantenerse siempre limpios. • Si se encuentra una película en la cámara, debería introducir una pila nueva inmediatament e después de extraer la gastada. • Si la cámara per manece más de 5 minutos ...

  • Leica 18141 - page 131

    128 Nota: Con motivo de la prolongación de la vida útil de la pila, a pesar de este Stand-b y debería convertirse en una costumbre desconectar siempre la cámara si no se utiliza durante un largo período de tiempo. Si la cámara se ha conectado en el estado de Stand-by , puede volver a activ arse en cualquier momento tomando una de las si- guie ...

  • Leica 18141 - page 132

    129 Notas: • Los datos se introducen mediant e LEDs (Light Emitting Diodes – diodos luminiscentes) desde delant e en la película. • La luminosidad de la impresión es controlada por el ajuste au- tomático de la sensibilidad de las películas (codificación D X) de la cámara. Sin embargo, su legibilidad puede variar ligera- mente en funció ...

  • Leica 18141 - page 133

    130 Paso de manejo 1 . Pulse durante largo tiempo la t ecla DA TE (23) (mín. 2s). 2. Gire el dial de a juste central (1 8) hacia la derecha (en sen- tido de las agujas del reloj), para aumentar el valor , o hacia la izquierda (en sentido contrario al de las agujas del reloj) para disminuirlo. Nota: Los valores están dispuestos en un «bucle sin f ...

  • Leica 18141 - page 134

    131 Selección de los datos que desean introducirse/la secuencia de la fecha Con la tecla D A TE (1 2) también puede seleccionar si desea visualizar fechas, o qué fechas desea visualizar e inser tar en sus fo tografías. De conformidad con las distintas formas de escritur a internacionales, la LEICA CM permite cuatro posibles representaciones de ...

  • Leica 18141 - page 135

    132 Colocación de la película El enhebrado automático de la película se puede efectuar tanto con la cámara conectada como desconectada. Atención: • Antes de abrir la tapa post erior , compruebe imprescindible- mente si en la cámara se encuentra todavía una película no re- bobinada. En caso contrario, la luz incidente estropearía la par ...

  • Leica 18141 - page 136

    133 Paso de manejo 1 . Desbloquear y abrir la tapa posterior (1 7) con el pestillo (1 3) en el lado izquierdo de la cámar a. Nota: Aprovechando esta oportunidad controle si se en- cuentra polvo en la lente post erior del objetivo. Si es así, deberá eliminarse con un pincel de soplado. 2. Coloque el cartucho de película en el compar timiento al ...

  • Leica 18141 - page 137

    134 Paso de manejo (cont.) 4. Cierre la tapa posterior . A continuación se conecta la cá- mara (en el caso de que no estuviera conectada anterior- mente), enhebra automáticament e la película y la trans- porta hasta la primer a instantánea. Indicaciones en el panel de datos Si se ha enhebrado de forma correcta en el contador de imágenes: al p ...

  • Leica 18141 - page 138

    135 Películas de pequeño formato utilizables La LEICA CM es una cámara de pequeño formato, es decir se car- ga con películas del formato «35 mm». La cámara ajusta au- tomáticament e las películas de formato pequeño de codificación D X (en el envoltorio y los cartuchos está la indicación «DX»). Las películas codificadas con DX por e ...

  • Leica 18141 - page 139

    136 El visor/las indicaciones en el visor La imagen del visor de la LEICA CM muestra apro x. el 85 % del campo de imagen. En el visor pueden verse las siguientes mar- cas e indicaciones: a. Delimitaciones de inter valo cercano E n las fotografías a corta distancia, la imagen del visor frente al sector captado por el obje tivo está desplazada haci ...

  • Leica 18141 - page 140

    137 Fotog rafiar con la LEICA CM Por un lado, la LEICA CM es una cámara completament e au- tomática. Permite fo tografiar sin problemas, de forma sencilla, segura y rápida gracias al ajuste automático de la distancia y , con ello, de la nitidez (autofoco) a la e xposición totalmente au- tomática y controlada por programa y , cuando es necesar ...

  • Leica 18141 - page 141

    138 Ajuste automático de la distancia/autofoco Para el funcionamiento de aut ofoco el dial de ajuste (9) se gira a la derecha del todo (es decir , en sentido de las agujas del reloj), hasta que encastre en la posición AF . Si su motivo principal tiene que disponerse en el centro de la imagen, sitúe el marco en el centro del visor sobre la parte ...

  • Leica 18141 - page 142

    Español 139 Ajuste manual de la distancia Para el ajust e manual, el dial de ajuste (9) se gira desde la posi- ción encastrada AF hacia la izquierda (es decir , en sentido con- trario a las agujas del reloj) hasta alcanzar la distancia deseada. En el panel de datos (1 9), en lugar de la fecha se visualiza enton- ces la distancia ajustada, p. ej., ...

  • Leica 18141 - page 143

    140 Notas: • La indicación en el visor se ref iere en cada momento a la parte del motivo que en ese moment o abarca el campo de medición (el recuadro). • La indicación desaparece 1 2 s después de que se libere el dispar ador; durante ese tiempo, cada accionamiento de la rueda de ajus- te se prolonga dicho tiempo otros 4 s. T ras la fotograf ...

  • Leica 18141 - page 144

    141 El control de la exposición La LEICA CM le permite elegir entre dos modos de funcionamient o para el control de la exposición, con los que puede ajustar la cámara a la forma de trabajo preferida o al respectivo motivo. De esta forma, puede elegirse entre un programa automático rápid o, cómodo y seguro, es decir , completament e automátic ...

  • Leica 18141 - page 145

    142 Shift del programa La programación automática variable de la LEIC A CM combina la seguridad y la rapidez de la regulación totalmente aut omática de la ex- posición con la posibilidad de poder cambiar en todo moment o la combinación de tiempo/diafragma seleccionada por la cámara con- forme a las ideas propias. Si, p. ej., en fotografías ...

  • Leica 18141 - page 146

    143 Modalidad de prioridad de apertura La modalidad de prioridad de aper tura regula la velocidad de ob- turación de forma automática, adaptándola al diafragma prede- terminado de forma manual. De esta forma puede, p. ej., ase- gurarse que con el valor de diafragma seleccionado se manten- drá constante la profundidad de nitidez; es decir , incl ...

  • Leica 18141 - page 147

    144 Memorizar enfoque y e xposición El sistema de e xposición y medición de la LEICA CM está diseñado para el enfoque del centro, es decir; aunque se abarca todo el cam- po de la fotografía, el int er valo marcado por el marco de autofoco se pondera con mucha más intensidad. Debido a este diseño, las par tes del mo tivo dispuestas en el cen ...

  • Leica 18141 - page 148

    145 Compensaciones de la exposición Los fotóme tros están calibrados sobre motivos de luminosidad media, que reflejan por término medio aproximadament e el 1 8 % de la luz efectiva. Si el motiv o medido no cumple estas condiciones, se debería realizar la correspondiente compensación de la expo- sición. La LEICA CM posibilita compensaciones e ...

  • Leica 18141 - page 149

    146 Ejemplo para una compensación según + (corresponde a un aumento de la exposición) En motivos con superf icies de mucha luminosidad dominantes, que reflejan mucha luz, p. ej., en la nieve o en la play a, el medi- dor de exposición selecciona un tiempo de e xposición demasia- do cor to y/o un diafragma pequeño. Debido a est o, la nieve se r ...

  • Leica 18141 - page 150

    Español 147 Modos de funcionamiento seleccionables La LEICA CM ofrece 1 5 variantes de función distintas para el funcionamiento de flash, incluso la posibilidad de llevar a cabo e xposiciones prolongadas en cualquier momento. Aquí ha y reunidas funciones adicionales en combinaciones distintas para modos de funcionamien to en la práctica. Estos ...

  • Leica 18141 - page 151

    148 Nota: En las respectivas descripciones de los modos de funcio- namiento se indica, si sólo es posible seleccionarlas en el «nivel de ajust e 2» (concierne a los n. o 3–5 y 8–1 4). Importante: Los modos de funcionamiento ajustados permane- cen activos mientras no se seleccionen otros. Si por el contrario Ud. desconecta la cámara o se des ...

  • Leica 18141 - page 152

    149 • Para dispositivos de flash SCA es válido: 1 . Como modos de flash sólo están disponibles conexiones y desconexiones de flash manuales (n. o 6 y 1 5). 2. En la cámara sólo puede utilizarse la modalidad de prioridad de aber tura (con el ajust e de modalidad de prioridad de aper- tura, en el visor aparece , el visor está bloqueado). 3. E ...

  • Leica 18141 - page 153

    150 Los modos de funcionamiento con activ ación automática del flash Con estos modos de funcionamient o, el flash se conecta automáticamente siempre que, en caso de malas condiciones de iluminación, al fotografiar sin trípode puedan resultar imágenes borrosas debido a movimient os durante tiempos de exposición largos, hecho que puede produci ...

  • Leica 18141 - page 154

    151 (2) Fotog rafiar con activación automática del flash y destello pre vio t En el caso de retratos y de fo tografías de grupos hechas con flash puede producir se el efecto de «ojos rojos» cuando la luz del flash es reflejada directamente por la retina de los ojos a la cámara. Las personas a fotografiar no deberían, por tanto, mirar direc t ...

  • Leica 18141 - page 155

    152 (3) Fotog rafiar con la activación automática del flash y v elocidades de obturación más lentas S (sólo seleccionable mediante el «segundo nivel de a juste», ver «Modos de funcionamient o seleccionables», pág. 1 4 7). Para minimizar el riesgo de imágenes borrosas, el tiempo de exposición no se prolonga más de 1 / 60 s en los modos ...

  • Leica 18141 - page 156

    153 (4) Fotog rafiar con activación automática del flash, v elocidades de obturación más lentas y destello previo S t (sólo seleccionable mediante el «segundo nivel de a juste», ver «Modos de funcionamient o seleccionables», pág. 1 4 7) Este modo de funcionamient o le permite utilizar de forma combinada las funciones de los modos de funci ...

  • Leica 18141 - page 157

    154 (5) Fotog rafiar con activación automática de flash, v elocidades de obturación más lentas y sincronización del flash al final del tiempo de exposición nS (sólo seleccionable mediante el «segundo nivel de a juste», ver «Modos de funcionamient o seleccionables», pág. 1 4 7) La LEICA CM permite conectar el encendido de flash de forma ...

  • Leica 18141 - page 158

    155 Los modos de funcionamiento con activ ación manual del flash Como en el apar tado «Los modos de funcionamiento con activ ación automática de flash» en la pág. 1 50, la LEICA CM conecta además el flash automáticamente también en situaciones de contraluz. Sin embargo, si la parte oscura del motivo no debe aparece en el cen- tro de la fot ...

  • Leica 18141 - page 159

    156 (8) Fotog rafiar con activación manual del flash y v elocidades de obturación más lentas q S (sólo seleccionable mediante el «segundo nivel de a juste», ver «Modos de funcionamient o seleccionables», pág. 1 4 7) Nota: Cuando hay poca luz; es decir , cuando las velocidades de obturación están por encima de 1 / 60 s, la cámara deberí ...

  • Leica 18141 - page 160

    157 (9) Fotog rafiar con activación manual del flash, v elocidades de obturación más lentas y destello previo (preflash) q S t (sólo seleccionable mediante el «segundo nivel de a juste», ver «Modos de funcionamient o seleccionables», pág. 1 4 7) Nota: Cuando hay poca luz; es decir , cuando las velocidades de obturación están por encima d ...

  • Leica 18141 - page 161

    158 (1 0) Fot ografiar con activación manual de flash, sincronización del flash con el final del tiempo de exposición y v elocidades de obturación más lentas q nS (sólo seleccionable mediante el «segundo nivel de a juste», ver «Modos de funcionamient o seleccionables», pág. 1 4 7) Nota: Cuando hay poca luz; es decir , cuando las velocida ...

  • Leica 18141 - page 162

    159 Fotog rafiar con fotografías de e xposiciones prolongadas controladas manualmente Para reproducir todo el encant o de determinados motivos, como p. ej., una t ormenta, escenas callejeras noctur nas o fuegos artif i- ciales, es necesario realizar fotografías con e xposiciones prolongadas. Para conseguir imágenes absolutamente nítidas con e x ...

  • Leica 18141 - page 163

    160 (1 1) Fot ografiar con activación manual del flash y con la función T q T (sólo seleccionable mediante el «segundo nivel de a juste», ver «Modos de funcionamient o seleccionables», pág. 1 4 7) El ajuste/las indicaciones Paso de manejo 1 . Al ajustar la función 2. Al ajustar la función/ al accionar el dispa- rador (como mínimo hasta e ...

  • Leica 18141 - page 164

    161 (1 2) Fotografiar con activ ación manual del flash, destello previo y con la función T q t T (sólo seleccionable mediante el «segundo nivel de a juste», ver «Modos de funcionamient o seleccionables», pág. 1 4 7) El ajuste/las indicaciones Paso de manejo 1 . Al ajustar la función 2. Al ajustar la función/ al accionar el dispa- rador (c ...

  • Leica 18141 - page 165

    162 (1 3) Fotografiar con activ ación manual de flash, sincronización del flash al final del tiempo de exposición y con la función T q n T (sólo seleccionable mediante el «segundo nivel de a juste», ver «Modos de funcionamient o seleccionables», pág. 1 4 7) El ajuste/las indicaciones Paso de manejo 1 . Al ajustar la función 2. Al ajustar ...

  • Leica 18141 - page 166

    163 (1 4) Fotografiar con desactivación manual del flash y con la función T u T (sólo seleccionable mediante el «segundo nivel de a juste», ver «Modos de funcionamient o seleccionables», pág. 1 4 7) El ajuste/las indicaciones Paso de manejo 1 . Al ajustar la función 2. Al ajustar la función/ al accionar el dispa- rador (como mínimo hasta ...

  • Leica 18141 - page 167

    164 (1 5) Fotografiar con la desactiv ación manual del flash u Desconectando conscientement e el flash pueden fotografiar se, p. ej. escenas de gran efecto al atardecer o en int eriores o bien se puede fotografiar en museos en los que está prohibido el uso del flash. T ambién en este modo de funcionamient o, la luz del ento rno controla las velo ...

  • Leica 18141 - page 168

    165 La función B de ajuste automático En los modos d funcionamiento S (3), S t (4), nS (5), q S (8), q S t (9), q nS (1 0) y u (1 5), la cámara cam- bia automáticament e a exposición prolongada cuando la claridad está por debajo de un de terminado umbral. En el panel de datos (1 9) aparece, con el dispar ador medio presionado, adicional- ment ...

  • Leica 18141 - page 169

    166 Memorizar los modos de funcionamiento de flash/de la compensación de la e xposición ajustada En determinadas circunstancias o bien en algunos motiv os puede ser útil trabajar siempre con det erminadas funciones de la LEICA CM. Así debe fotografiarse, quizás, una secuencia de retratos siempre con destello pre vios – o una serie de fotogra ...

  • Leica 18141 - page 170

    167 El disparador automático La LEICA CM ofrece la posibilidad de elegir entre 2 y 1 0 s de tiempo preliminar para el funcionamiento del disparador automático , p. ej. para fotografías, en las cuales le gustaría aparecer en la imagen, o para evitar cualquier imag en borrosa producida por el accionamiento del disparador . Paso de manejo 1 . Pres ...

  • Leica 18141 - page 171

    168 Notas: • El disparador automático siempre está activado para una sola fot ografía; es decir , si desea volver a utilizarse después, ha de ajustarse de nuev o. • Si el flash aún no está cargado al pulsar el botón TIMER, – el símbolo en el visor parpadea –, no se puede activar el dispara dor automático. Importante: T enga en cuen ...

  • Leica 18141 - page 172

    169 Rebobinado automático de la película impresionada Después de la última instantánea, al final de la película, comien- za automáticament e el rebobinado de la misma. Con ello, el con- tador en el panel de datos (1 9) cuenta hacia atrás, con lo cual los números de fotografías y los segment os retrospectivos aparecen como confirmación de ...

  • Leica 18141 - page 173

    170 Qué hacer cuando . . . Fallo Causa Remedio La cámara no dispara La cámara no está conectada Conectar la cámara (ver pág. 1 27) La pila está gastada Cambiar la pila (ver pág. 1 26) Contactos de la pila sucios Limpiar los contact os de la pila El flash está recargando Esperar un breve intervalo de tiempo, hasta que se haya cargado el fla ...

  • Leica 18141 - page 174

    171 Fallo Causa Remedio Objeto principal desenfocado Sensores de autofoco tapados Mantener alejadas las manos, la correa de transpor te y similares Distancia al objeto insuficiente La distancia mínima al objeto debe ser de 0,7 m El objeto principal no está en el int erior Utilizar la memorización de nitidez del marco de autofoco (ver pág. 1 4 4 ...

  • Leica 18141 - page 175

    172 Consejos para el cuidado de la LEICA CM El polvo de la lente e xterior del objetiv o se elimina con un pincel capilar suave o con un paño limpio, seco y que no suelt e hila chas, p. ej. un pañuelo del algodón limpio o una gamuza sin apres to. Se ha de tener en cuenta que no se t oque previamente la parte del trapo de algodón que se utilice ...

  • Leica 18141 - page 176

    173 Especificaciones Tipo cámara compacta de visor de pequeño formato con autofoco, con objetivo normal muy luminoso, ligeramente de gran angular . Formato de película 2 4x3 6m m Objetivo LEIC A SUMMARIT 1:2,4/40 mm (6 lentes en 4 grupos) con multi reves- timiento mejorada. Intervalo de ajuste de distancias Ajuste de distancias automático o man ...

  • Leica 18141 - page 177

    174 Margen de flash (ISO 1 00/2 1°) de 0,7–5,8 m. Índice 1 4. Tiempo entre destellos Aprox. 6 segundos con pila nueva. Ajuste de la sensibilidad de la película Ajuste automático de la sensibilidad de la película para películas con codificación DX de ISO 25/1 5° hasta 5000/38°. En películas sin codificación DX o con codificación DX y s ...

  • Leica 18141 - page 178

    175 Academia Leica Junto a los product os de avanzadas prestaciones utilizados para la reproducción a la obser vación, ofrecemos desde hace muchos años, como ser vicio especial de la Leica Akademie, seminarios y cursillos de formación pr ácticos, en los cuales los conocimientos relativos al mundo de la fot ografía, de la proyección y de la a ...

  • Leica 18141 - page 179

    my point of vie w Leica Camera AG / Osk ar-Barnack -Str . 1 1 / D-35606 Solms www.leica-camera.com / info@leica-camera.com T elefon +49 (0) 64 42 - 208-0 / Telefax +49 (0) 64 42 - 208-333 9307 1 X/ 03/ LX/ B. ...

Fabricante Leica Categoría Film Camera

Los documentos del dispositivo Leica 18141 que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Leica
- manuales de instrucciones 18141
- hojas de producto Leica
- folletos informativos
- o etiquetas energéticas Leica 18141
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Leica 18141.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Leica 18141, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Leica 18141. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Leica 18141.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Leica 18141, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Leica 18141. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Leica 18141.

El manual de instrucciones completo de Leica debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Leica 18141 - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Leica 18141, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Leica 18141 que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Leica 18141 - que deben facilitarnos los primeros pasos durante el uso de Leica 18141
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Leica 18141
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Leica 18141 en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Leica 18141?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Leica 18141, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Leica 18141 probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Comentarios (0)