Manual de instrucciones Apple 160

149 de páginas 1.01 mb
Descargar

Pasar a la página of 149

Summary
  • Apple 160 - page 1

    Service Source K Po werBook 160/165/180 Series PowerBook 160, PowerBook 165, PowerBook 180 ...

  • Apple 160 - page 2

    Service Source K Basics Po werBook 160/165/180 ...

  • Apple 160 - page 3

    Basics Overview - 1 Overview This manual includes complete repair procedures for the PowerBook 160, PowerBook 165, and PowerBook 180. Figure: Po werBook 160, 165, 180 ...

  • Apple 160 - page 4

    Basics Repair Strategy - 2 Repair Strategy Service the PowerBook 160, 165, and 180 through module exchange and parts replacement. Customers can request on- site service from an Apple Authorized Service Provider Plus (AASP+) Apple Assurance (US only), or request a courier through the Apple Canada Technical Answerline (Canada only). They can also cho ...

  • Apple 160 - page 5

    Basics Repair Strategy - 3 Large businesses, universities, and K-12 accounts must provide a purchase order on all transactions, including orders placed through the AppleOrder (US only) or ARIS (Canada only) system. USA Ordering US Service Providers not enrolled in AppleOrder may fax their orders to Service Provider Support (512-908- 8125) or mail t ...

  • Apple 160 - page 6

    Basics Repair Strategy - 4 Canadian Ordering Canadian Service Providers not enrolled in ARIS may fax their orders to Service Provider Support in Canada (1-800-903-5284). For Canadian inquiries, please call Service Provider Support at 905-513-5782 and select option #3. ...

  • Apple 160 - page 7

    Basics Warranty/AppleCare/ARIS - 5 Warranty/AppleCare/ARIS US Only The PowerBook 160, 165, and 180 are covered under the Apple One-Year Limited Warranty. The AppleCare Service Plan is also available for these products. Service Providers are reimbursed for warranty and AppleCare repairs made to these computers. For pricing information, refer to “S ...

  • Apple 160 - page 8

    Basics Display Compatibility Matrix - 6 Display Compatibility Matrix Important : PowerBook 160/165/180 family includes two displays—an active matrix and an FSTN display. Each of these displays requires a compatible inverter and display cable; the inverters, display cables, and displays are not interchangeable. Before ordering one of these parts, ...

  • Apple 160 - page 9

    Service Source K Specifications Po werBook 160/165/180 ...

  • Apple 160 - page 10

    Specifications Introduction - 1 Introduction You can also find specifications information for this product in the Spec Database, which you can access in one of three ways: — Launch it directly by double-clicking the Apple Spec Database runtime alias at the top level of the Main Service Source CD. — Select "Apple Spec Database" from th ...

  • Apple 160 - page 11

    Specifications Processor - 2 Processor 160 CPU Motorola 68030 microprocessor 25 MHz 165 CPU Motorola 68030 microprocessor 33 MHz 180 CPU Motorola 68030 microprocessor 33 MHz Coprocessor (180 Only) Motorola 68882 floating-point math coprocessor 33 MHz ...

  • Apple 160 - page 12

    Specifications Processor - 3 Addressing 32-bit internal registers 32-bit address bus 32-bit data bus ...

  • Apple 160 - page 13

    Specifications Memory - 4 Memory RAM 4 MB pseudostatic RAM (PSRAM) installed on the daughterboard Expandable to 8 MB with 4 MB expansion card Expandable to 14 MB with third-party PSRAM expansion cards RO M 1 MB PRAM 256 bytes of parameter memory VRAM 128K of static video display memory Clock/Calendar CMOS custom chip with long-life lithium battery ...

  • Apple 160 - page 14

    Specifications Disk Storage - 5 Disk Storage Floppy Drive 19 mm high, internal, 1.4 MB Apple SuperDrive Hard Drive 2.5 in. hard drives (many capacities) ...

  • Apple 160 - page 15

    Specifications I/O Interfaces - 6 I/O Interfaces Floppy Drive DB-19 serial port for connecting external floppy drives SCSI HDI-30 SCSI port with 1.5 MB/sec. transfer rate Supports up to five external SCSI devices Does not provide termination power Connect SCSI device to computer with HDI-30 SCSI system cable. A pple Desktop Bus Apple Desktop Bus (A ...

  • Apple 160 - page 16

    Specifications I/O Interfaces - 7 Serial Two RS-422 serial ports; mini DIN-8 connectors Sound Monaural sound-in port Stereo sound-out headphone jack, which plays CD audio tracks in stereo and computer-generated sounds in mono V ideo Video-out port; 8 bit, 256 color video support Supports Macintosh monitors up to 16-in. color and VGA monitors Po wer ...

  • Apple 160 - page 17

    Specifications I/O Devices - 8 I/O De vices K eyboard Built-in keyboard with standard Macintosh layout 63 keys domestic; 64 keys ISO Two-level tilt adjustment T rackball 30 mm diameter, dual button ADB interface Microphone Electret, omnidirectional Output voltage of 4 mV, peak to peak ...

  • Apple 160 - page 18

    Specifications Sound and Video - 9 Sound and V ideo Sound Generator Apple sound chip provides 8-bit sound capable of driving stereo headphones or other stereo equipment through the sound jack 8-bit sound input, sampled at 11 or 22 kHz 160/165 V ideo Display 10 in. (254 mm) diagonal screen Flat-panel, film-compensated supertwist nematic (FSTN) liqui ...

  • Apple 160 - page 19

    Specifications Electrical - 10 Electrical Main Battery Nickel cadmium (NiCad), 2.5 Ah Provides 2-3 hours of usage before recharging Recharge time: 3 hours 500 power cycles capacity PRAM Battery 3 V lithium Po wer Adapter 110–220 VAC line voltage 17 W, 50–60 Hz US, Japanese, United Kingdom, Australian, and European versions ...

  • Apple 160 - page 20

    Specifications Physical - 11 Physical Dimensions Height: 2.25 in. (5.7 cm) Width: 11.25 in. (28.6 cm) Depth: 9.3 in. (23.6 cm) W eight 6.8 lb. (3.1 kg) with battery ...

  • Apple 160 - page 21

    Specifications Environmental - 12 En vironmental Operating T emperature 50–104° F (10-40° C) Storage T emperature -13 to 140° F (-25 to 60° C) Relative Humidity 20–80% noncondensing Altitude 0–15,000 ft. (0–4722 m) Operational Altitude 0–10,000 ft. (0–3048 m) ...

  • Apple 160 - page 22

    Specifications Other - 1 3 Other F ax/Data Modem Internal 2400-baud modem with fax send at 9600 baud (includes fax send software) 300/1200/2400 bps transmission rates Serial binary and asynchronous protocols Error correction and data compression: MNP 4, 5 and V.42, V.42bis ...

  • Apple 160 - page 23

    Specifications Other - 1 4 Express Modem Internal 14,400-baud modem with fax send/receive at 9600 baud 300-14,400 bps data transmission rates 2400/4800/7200/9600 bps transmission rates Full duplex operation; asynchronous or framed modes Error correction: V.42 compliance (MNP 2-4) Data compression: V.42bis (4 to 1 compression) and MNP-5 (2 to 1 comp ...

  • Apple 160 - page 24

    Service Source K Troubleshooting PowerBook 160/165/180 ...

  • Apple 160 - page 25

    Troubleshooting General/ - 1 General The Symptom Charts included in this chapter will help you diagnose specific symptoms related to your product. Because cures are listed on the charts in the order of most likely solution, try the first cure first. Verify whether or not the product continues to exhibit the symptom. If the symptom persists, try the ...

  • Apple 160 - page 26

    Troubleshooting General/ - 2 If this does not reset the power manager, 1 Remove the AC adapter and the battery. 2 Let the unit sit without power hooked up for 3–5 minutes. 3 Using two paper clips, simultaneously hold down the reset and interrupt buttons for 5–10 seconds. 4 Reinstall the battery and, if necessary, reconnect the AC adapter. 5 Tur ...

  • Apple 160 - page 27

    Troubleshooting Symptom Charts/ Startup - 3 Symptom Charts Startup RAM failure occurs (eight-tone error chord sequence sounds after startup chord) 1 Reseat PSRAM expansion card and check connection. 2 Replace PSRAM expansion card. 3 Replace daughterboard. 4 Replace motherboard. Hardware failure occurs (four-tone error chord sequence sounds after st ...

  • Apple 160 - page 28

    Troubleshooting Symptom Charts/ Startup - 4 Startup Screen displays checkerboard pattern; no startup chime 1 Reseat RAM expansion card. 2 Replace RAM expansion card. 3 Replace daughterboard. 4 Reseat display cable. ...

  • Apple 160 - page 29

    Troubleshooting Symptom Charts/ Power - 5 Power Screen is blank; computer doesn’t respond 1 Restart computer. 2 Connect power adapter and restart computer in 3-4 minutes. 3 Try known–good, charged main battery. 4 Check all interconnect board, daughterboard, and motherboard connections. 5 Reset the power manager. 6 Replace keyboard. 7 Replace in ...

  • Apple 160 - page 30

    Troubleshooting Symptom Charts/ Power - 6 Power After you remove main battery, some Control Panel settings are different 1 Check cables. 2 Replace interconnect board. 3 Replace daughterboard. 4 Replace motherboard. Power adapter is plugged in, but battery DA does not indicate charger is connected 1 This is normal for fully charged battery. 2 Check ...

  • Apple 160 - page 31

    Troubleshooting Symptom Charts/ Power - 7 Power Low-power warning appears 1 Recharge battery or attach power adapter. 2 Verify that peripherals are low-power. 3 Remove external devices or connect power adapter. 4 Try known-good, charged main battery. 5 Try known-good power adapter. 6 Replace motherboard. Computer runs when plugged into wall outlet ...

  • Apple 160 - page 32

    Troubleshooting Symptom Charts/ Video - 8 Video Pixel is always white PowerBook 180 If there are more than five voids (pixels that are always white), or two or more voids within one inch of each other, replace display (CPRC/international repairers only) or return computer to Apple. PowerBooks 160 and 165 Replace display. Pixel is always black Power ...

  • Apple 160 - page 33

    Troubleshooting Symptom Charts/ Video - 9 Video Row or partial row of pixels never comes on (white line) PowerBook 160/165 1 Check cables. 2 Replace display cable. 3 Replace display. If PowerBook has serial number below FC247xxxxxx or CK247xxxxxx, replace both display and daughterboard. (Do not replace Rev. B daughterboard.) 4 Replace interconnect ...

  • Apple 160 - page 34

    Troubleshooting Symptom Charts/ Video - 1 0 Video Row or partial row of pixels is always on (black line) PowerBook 160/165 1 Check cables. 2 Replace display cable. 3 Replace display. 4 Replace interconnect board. PowerBook 180 5 Check cables. 6 Replace display cable. 7 Replace interconnect board. 8 Replace display (CPRC/international only) or retur ...

  • Apple 160 - page 35

    Troubleshooting Symptom Charts/ Video - 1 1 Video Thin white line is always on at middle of screen PowerBook160/165 Thin white line is normal. PowerBook 180 Replace display (CPRC/international repairers only) or return computer to Apple. ...

  • Apple 160 - page 36

    Troubleshooting Symptom Charts/ Video - 1 2 Video Display is very light or totally white 1 Adjust screen contrast. 2 Check display cable, inverter board, interconnect board, daughterboard, and motherboard connections. 3 Replace inverter board. 4 Replace interconnect board. 5 Replace display cable. 6 PowerBook 160/165: Replace display. 7 Replace dau ...

  • Apple 160 - page 37

    Troubleshooting Symptom Charts/ Video - 1 3 Video Rainbow colors visible from extreme viewing angles PowerBook 160/165 Such colors are normal for FSTN screens. Screen brightness is not uniform PowerBook 160/165 Irregularity in screen brightness is normal. Adjust contrast and brightness to diminish effect. PowerBook 180: Replace display (CPRC/intern ...

  • Apple 160 - page 38

    Troubleshooting Symptom Charts/ Video - 1 4 Video Display stopped working or dimmed but is fine now PowerBook 160/165 If temperature is in the approximate range of under 5 or over 40 degrees centigrade, this reaction is normal. ...

  • Apple 160 - page 39

    Troubleshooting Symptom Charts/ Video - 1 5 Video Backlight doesn’t operate 1 Verify that cables are not pinched or severed. 2 Check display cable, inverter board, interconnect board, daughterboard, and motherboard connections. 3 Replace inverter board. 4 Replace inverter display cable. 5 Replace interconnect board. 6 Replace display cable. 7 Pow ...

  • Apple 160 - page 40

    Troubleshooting Symptom Charts/ Video - 1 6 Video Screen goes blank 1 Press any key to wake computer from system sleep. 2 Check display cable connection. 3 Reseat daughterboard. 4 Replace daughterboard. ...

  • Apple 160 - page 41

    Troubleshooting Symptom Charts/ Video - 1 7 Video No display, but computer appears to operate correctly 1 Adjust screen contrast. 2 Check display cable, inverter board, interconnect board, daughterboard, and motherboard connections. 3 Connect power adapter. 4 Replace inverter board. 5 Replace interconnect board. 6 Replace display cable. 7 PowerBook ...

  • Apple 160 - page 42

    Troubleshooting Symptom Charts/ Video - 1 8 Video Audio and video present, but internal floppy drive does not operate 1 Try known-good floppy disk. 2 Check floppy drive cable connection. 3 Replace floppy drive cable. 4 Replace floppy drive. 5 Replace daughterboard. 6 Replace motherboard. ...

  • Apple 160 - page 43

    Troubleshooting Symptom Charts/ Hard Drive - 19 Hard Drive Internal hard drive does not operate 1 Disconnect external SCSI devices. 2 Check internal hard drive cable connection. 3 Use HD SC Setup to reinitialize drive. 4 Replace internal hard drive cable. 5 Replace internal hard drive. 6 Replace motherboard. ...

  • Apple 160 - page 44

    Troubleshooting Symptom Charts/ Floppy Drive - 20 Floppy Drive Audio and video present, but internal floppy drive does not operate 1 Try known-good floppy disk. 2 Check floppy drive cable connection. 3 Replace floppy drive cable. 4 Replace floppy drive. 5 Replace daughterboard. 6 Replace motherboard. Disk ejects while booting; display shows Mac ico ...

  • Apple 160 - page 45

    Troubleshooting Symptom Charts/ Floppy Drive - 21 Floppy Drive Disk does not eject 1 Switch off system and hold mouse button down while you switch system on. 2 Insert opened paper clip into hole beside drive. 3 Check floppy drive cable connection. 4 Replace floppy drive cable. 5 Replace floppy drive. 6 Replace daughterboard. 7 Replace motherboard. ...

  • Apple 160 - page 46

    Troubleshooting Symptom Charts/ Floppy Drive - 22 Floppy Drive Read/write/copy error 1 Try known-good floppy disk. 2 Install inverter shield if absent. 3 Check floppy drive cable connection. 4 Replace floppy drive cable. 5 Replace floppy drive. ...

  • Apple 160 - page 47

    Troubleshooting Symptom Charts/ Peripherals - 23 Peripherals After you connect external SCSI device, computer does not boot 1 Switch on external SCSI device before starting computer. 2 Check cable connections. 3 Verify that standard Apple terminator terminates SCSI chain at beginning and end. 4 Verify that SCSI select switch setting on external dev ...

  • Apple 160 - page 48

    Troubleshooting Symptom Charts/ Peripherals - 24 Peripherals 1 Replace interconnect board. 2 Replace daughterboard. 3 Replace motherboard. Cursor intermittently does not move or moves erratically 1 Restart computer. 2 Clean ball and rollers of trackball. 3 Check cables. 4 Replace trackball. 5 Replace keyboard. 6 Replace interconnect board. 7 Replac ...

  • Apple 160 - page 49

    Troubleshooting Symptom Charts/ Peripherals - 25 Peripherals Cursor moves, but clicking trackball button has no effect 1 Restart computer. 2 Check interconnect board, daughterboard, and motherboard connections. 3 Replace trackball. 4 Replace keyboard. 5 Replace interconnect board. 6 Replace daughterboard. 7 Replace motherboard. Cursor does not move ...

  • Apple 160 - page 50

    Troubleshooting Symptom Charts/ Peripherals - 26 Peripherals No response to any key on keyboard 1 Reset power manager. 2 Check connections of keyboard to interconnect board, and interconnect board to daughterboard. 3 Replace keyboard. 4 Replace interconnect board. 5 Replace daughterboard. Known-good direct- connect printer does not print 1 Verify t ...

  • Apple 160 - page 51

    Troubleshooting Symptom Charts/ Peripherals - 2 7 Peripherals Known-good network printer does not print 1 Verify that System is 7.1 or later. 2 Verify that Chooser and Control Panel settings are correct. 3 Check cables. 4 Replace printer interface cable. 5 Try known-good printer. If printer works, troubleshoot network. Refer to Networks manual. 6 R ...

  • Apple 160 - page 52

    Troubleshooting Symptom Charts/ Peripherals - 2 8 Peripherals I/O devices are unrecognized or garbage is transmitted or received 1 Verify that System is 7.1 or later. 2 Check cables. 3 Verify that SCSI device has standard Apple terminator. 4 Verify that SCSI select switch setting on external device is unique. 5 Test device with known-good computer. ...

  • Apple 160 - page 53

    Troubleshooting Symptom Charts/ Internal Modem - 2 9 Internal Modem Internal modem options do not appear in CDEV 1 Remove and reseat modem card. 2 Verify that System is 7.1 or later. 3 Replace modem card. 4 Replace motherboard. Modem does not respond properly to AT command set instructions 1 Verify that baud rate and data format settings of communi ...

  • Apple 160 - page 54

    Troubleshooting Symptom Charts/ Internal Modem - 3 0 Internal Modem Strange mix of characters appears on screen 1 Verify that baud rate and data format settings of communications application are compatible with internal modem and remote modem. 2 Check phone cord connection and operation. 3 Remove and reseat modem card. 4 Verify that System is 7.1 o ...

  • Apple 160 - page 55

    Troubleshooting Symptom Charts/ Internal Modem - 3 1 Internal Modem Modem does not respond to incoming call 1 If computer is in sleep mode, verify that Wake On Ring option in CDEV is selected. 2 Check phone cord connection and operation. 3 Replace modem card. 4 Replace motherboard. Modem has no sound output 1 Verify that Control Panel volume settin ...

  • Apple 160 - page 56

    Troubleshooting Symptom Charts/ Miscellaneous - 32 Miscellaneous Screen goes blank and computer shuts down every few minutes Adjust sleep delays in Control Panel or connect power adapter. Application seems to run slower after few seconds 1 Disable System Rest. (See owner’s manual.) 2 Connect power adapter. Hard drive is slow to respond, or screen ...

  • Apple 160 - page 57

    Troubleshooting Symptom Charts/ Miscellaneous - 33 Miscellaneous No sound from speaker 1 Verify that volume setting in Control Panel is above 0. 2 Verify that no external speaker is plugged in. 3 Check connections of speaker to interconnect board, interconnect board to daughterboard, and daughterboard to motherboard. 4 Replace interconnect board. 5 ...

  • Apple 160 - page 58

    Troubleshooting Startup Problems Flowchart/ Miscellaneous - 3 4 Startup Problems Flowchart START Reset the power manager. Press the power button to begin the startup sequence. Do the startup tones sound? No Yes Is the startup tone normal? Yes Does any video appear? No Yes See Startup Problems in the Symptom/Cure Chart. No 1. Check the cables. 2. Re ...

  • Apple 160 - page 59

    Troubleshooting Startup Problems Flowchart/ Startup Problems Flowchart Startup Problems Flowchart (continued) 1. Replace the daughterboard. 2. Replace the motherboard. END Does the desktop appear? No Yes No Yes No Do the trackball and keyboard function? 1. Reset the power manager. 2. Check the cables. 3. Replace the trackball (or track- pad). 4. Re ...

  • Apple 160 - page 60

    Service Source K T ake Apart Po werBook 160/165/180 ...

  • Apple 160 - page 61

    Take Apart Main Battery - 1 Main Battery Before you begin, disconnect the power adapter. Note: This procedure also covers removal of the main battery door. Important: Before removing the main battery, use the Macintosh Shut Down command. Otherwise, all RAM contents will be lost. Main Battery ...

  • Apple 160 - page 62

    Take Apart Main Battery - 2 ± W arning: The main battery contains toxic materials. Review battery-handling and disposal instructions in Bulletins/Safety. 1 Slide open the battery door. 2 Using the battery door as a handle, pull out the main battery. ...

  • Apple 160 - page 63

    Take Apart Main Battery - 3 3 Slide the battery door completely open. 4 Pull the end tab until it releases and remove the door from the battery. End Tab ...

  • Apple 160 - page 64

    Take Apart I/O Door - 4 I/O Door No preliminary steps are required before you begin this procedure. Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. I/O Door ...

  • Apple 160 - page 65

    Take Apart I/O Door - 5 1 Open the I/O door. 2 Carefully bend the door so that the middle bows downward and unhinge the two bottom door pegs. Right Door Peg ...

  • Apple 160 - page 66

    Take Apart Top Case - 6 Top Case Before you begin, remove the following: • Main battery • I/O door Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Top Case ...

  • Apple 160 - page 67

    Take Apart Top Case - 7 Note: Use a T-8 torx driver to remove the small screw from the rear connector panel and a T-10 torx driver to remove the other case screws. 1 Remove the five torx screws from the bottom case. ...

  • Apple 160 - page 68

    Take Apart Top Case - 8 2 Lift the back of the top case and disconnect the interconnect cable. 3 Lift off the top case and unhook the two tab fasteners from the front of the bottom case. Replacement Caution: When connecting the display cable connector, fold the cable as shown. If it is not folded correctly, the cable could short. Interconnect Cable ...

  • Apple 160 - page 69

    Take Apart Trackball Assembly - 9 Trackball Assembly Before you begin, remove the following: • Main battery • I/O door • Top case Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Trackball Assembly ...

  • Apple 160 - page 70

    Take Apart Trackball Assembly - 1 0 Caution: The trackball ribbon cable is fragile and should be handled with care. 1 Pull out the locking tab on the trackball connector and remove the trackball ribbon cable. Trackball Ribbon Cable Locking Tab ...

  • Apple 160 - page 71

    Take Apart Trackball Assembly - 1 1 2 Using a T-8 torx driver, remove the two mounting screws and lift the trackball assembly from the top case. ...

  • Apple 160 - page 72

    Take Apart Keyboard - 1 2 Keyboard Before you begin, remove the following: • Main battery • I/O door • Top case • Trackball assembly Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Keyboard ...

  • Apple 160 - page 73

    Take Apart Keyboard - 1 3 Caution: The keyboard ribbon cables are fragile and should be handled with care. 1 Lift the locking tabs on the two keyboard connectors and remove the keyboard ribbon cables. Keyboard Ribbon Cables ...

  • Apple 160 - page 74

    Take Apart Keyboard - 1 4 2 Using a T-8 torx driver, remove the seven mounting screws and lift the keyboard from the top case. ...

  • Apple 160 - page 75

    Take Apart Inverter Board - 15 Inverter Board Before you begin, remove the following: • Main battery • I/O door • Top case Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Inverter Board ...

  • Apple 160 - page 76

    Take Apart Inverter Board - 16 Important: The PowerBook 160/165 and PowerBook 180 displays require different inverter boards. Refer to the Service Source parts database for the correct part number for each board. ...

  • Apple 160 - page 77

    Take Apart Inverter Board - 17 1 Remove the two mounting screws. Note: Do not remove the inverter shield from the inverter board. 2 Pull the inverter board and attached shield straight up and off the connector on the interconnect board. 3 Disconnect the inverter cable. Inverter Cable Inverter Board Inverter Shield ...

  • Apple 160 - page 78

    Take Apart Inverter Board - 18 Replacement Note: Be sure to align the brightness and contrast pots on the inverter board with the plastic actuators on the top case. It is easiest to align the pots and actuators if you set both to their extreme outer positions. Actuator Actuator Inverter Board Contrast Pot Brightness Pot ...

  • Apple 160 - page 79

    Take Apart Inverter Board - 19 Replacement Note: If you are replacing the inverter board, order both the inverter board and the inverter shield. Install the new shield on the board before replacing it. Do not reuse the original inverter shield. Inverter Shield Inverter Board ...

  • Apple 160 - page 80

    Take Apart Interconnect Board - 2 0 Interconnect Board Before you begin, remove the following: • Main battery • I/O door • Top case • Inverter board Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Interconnect Board ...

  • Apple 160 - page 81

    Take Apart Interconnect Board - 2 1 ± W arning: The interconnect board contains hazardous materials. Return bad interconnect boards to Apple for proper disposal. Caution: The keyboard and display cables are fragile and should be handled with care. 1 Lift the locking tabs on connectors J5 and J3 and remove the keyboard ribbon cables. J5 Connector J ...

  • Apple 160 - page 82

    Take Apart Interconnect Board - 2 2 Note: The display cable will not come entirely out of the connector until you remove the interconnect board from the top case. 2 Pull out the locking tab on connector J2 and ease the display cable out of the connector as far as the cable will go. Replacement Note: Connect the display cable before replacing the in ...

  • Apple 160 - page 83

    Take Apart Interconnect Board - 2 3 3 Using a T-8 torx driver, remove the two mounting screws and lift the interconnect board from the top case. ...

  • Apple 160 - page 84

    Take Apart Actuators - 2 4 Actuators Before you begin, remove the following: • Main battery • I/O door • Top case • Inverter board Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Actuators ...

  • Apple 160 - page 85

    Take Apart Actuators - 2 5 1 Pull up the contrast actuator, rotate it toward the display, and remove the actuator from the top case. 2 Repeat for the brightness actuator. ...

  • Apple 160 - page 86

    Take Apart Elevation Feet - 2 6 Elevation Feet Before you begin, remove the following: • Main battery • I/O door • Top case Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Elevation Foot Elevation Foot ...

  • Apple 160 - page 87

    Take Apart Elevation Feet - 2 7 1 Using a T-8 torx driver, remove the torx screw, washer, and spring clip from the inside of the elevation foot. 2 Pull off the elevation foot. Elevation Foot Spring Clip ...

  • Apple 160 - page 88

    Take Apart Daughterboard - 2 8 Daughterboard Before you begin, remove the following: • Main battery • I/O door • Top case • PSRAM expansion card (if present) Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Daughterboard ...

  • Apple 160 - page 89

    Take Apart Daughterboard - 2 9 1 Using a T-8 torx driver, remove the four daughterboard mounting screws. Caution: Always use the logic board take-apart tool to separate the daughterboard connector from the motherboard connector. Trying to disconnect the daughterboard from the motherboard by rocking or peeling the boards apart damages the connectors ...

  • Apple 160 - page 90

    Take Apart Daughterboard - 3 0 2 Using the Apple logic board take-apart tool, disconnect the daughterboard from the motherboard. Replacement Note: If you are replacing a defective daughterboard, be aware that the PowerBook 160/ 165/180 daughterboards are very similar. To differentiate daughterboards, check the underside of the board. PowerBook 180 ...

  • Apple 160 - page 91

    Take Apart Daughterboard - 3 1 U27; PowerBook 160/165 boards do not. To further differentiate PowerBook 160 and 165 daughterboards, check the underside for the following resistors: • PowerBook 160 daughterboard R38 resistor: installed R39 resistor: not installed • PowerBook 165 daughterboard R38 resistor: not installed ...

  • Apple 160 - page 92

    Take Apart Daughterboard - 3 2 R39 resistor: installed For daughterboard part numbers, refer to the Service Source parts database. Replacement Note: The green heat sinks attached to the daughterboard are made of delicate heat-conducting material. If they are missing or damaged, they must be replaced. Replacement Note: To replace a damaged heat sink ...

  • Apple 160 - page 93

    Take Apart Daughterboard - 3 3 appropriately sized heat sink from the heat sink kit (part number 076-0069), and gently press the part into place. Replacement Caution: Make sure the heat sink is placed exactly as shown in the illustration. The heat sink should not hang over the side of the component it is covering, or it may short the component lead ...

  • Apple 160 - page 94

    Take Apart Daughterboard - 3 4 Replacement Note: If you are replacing a defective daughterboard in a PowerBook 160/180 within the serial number range FC233xxxxxx through FC241xxxxxx, you must also replace the sound jack insulator on the motherboard. Sound Jack Insulator Sound Jack Assembly Motherboard ...

  • Apple 160 - page 95

    Take Apart Daughterboard - 3 5 Replacement Note: To replace the sound jack insulator, carefully peel off the original insulator. Remove the paper backing on the revised insulator (part number 922-0591), and gently press it into place. Replacement Caution: Make sure the new insulator sits in exactly the same position as the original insulator. ...

  • Apple 160 - page 96

    Take Apart Motherboard - 3 6 Motherboard Before you begin, remove the following: • Main battery • I/O door • Top case • PSRAM expansion card (if present) • Daughterboard • Modem card (if present) Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safe ...

  • Apple 160 - page 97

    Take Apart Motherboard - 3 7 Caution: The hard drive, floppy drive, and thermistor cables are fragile and should be handled with care. 1 Lift the locking tabs and remove the floppy drive and thermistor cables. 2 Remove the hard drive cable. Hard Drive Cable Floppy Drive Cable Thermistor Cable Locking Tab Locking Tab ...

  • Apple 160 - page 98

    Take Apart Motherboard - 3 8 3 Remove the two hex- head screws and lift the motherboard from the bottom case. Hex-Head Screw Motherboard ...

  • Apple 160 - page 99

    Take Apart Hard Drive - 39 Hard Drive Before you begin, remove the following: • Main battery • I/O door • Top case • Modem card (if present) • Daughterboard Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Hard Drive ...

  • Apple 160 - page 100

    Take Apart Hard Drive - 40 Caution: The hard drive cable is fragile and should be handled with care. 1 Disconnect the hard drive cable from the motherboard. Hard Drive Cable ...

  • Apple 160 - page 101

    Take Apart Hard Drive - 41 2 Using a T-8 torx driver, remove the five screws from the drive retainer. 3 Using a jeweler’s screwdriver, release the drive retainer latch and remove the retainer. Retainer Latch Drive Retainer ...

  • Apple 160 - page 102

    Take Apart Hard Drive - 42 4 Lift the hard drive from the case. 5 Pull the release loop and disconnect the hard drive cable. Note: If the cable does not have a release loop, gently pry the cable from the drive with a screwdriver. Release Loop ...

  • Apple 160 - page 103

    Take Apart Hard Drive - 43 Replacement Note: Drive retainers for 17-mm-high and 19-mm-high hard drives are not interchangeable. Check the height of the replacement drive and use the appropriate drive retainer. If you are upgrading from a 40 MB to 80 MB hard drive, use the ridged, 17-mm retainer that shipped with the 80 MB hard drive. ...

  • Apple 160 - page 104

    Take Apart Hard Drive - 44 Replacement Note: For information on returning drives, cables, and carriers to Apple, refer to Additional Procedures in the Hard Drives chapter. ...

  • Apple 160 - page 105

    Take Apart Floppy Drive - 45 Floppy Drive Before you begin, remove the following: • Main battery • I/O door • Top case • Modem card (if present) • Daughterboard Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Floppy Drive ...

  • Apple 160 - page 106

    Take Apart Floppy Drive - 46 Note: Follow this procedure if a rectangular green heat sink extends over the floppy drive. 1 Remove the screw holding the heat sink over the floppy drive and lift off the heat sink. 2 Remove the mylar insulator attached to the drive retainer. Mylar Insulator Heat Sink ...

  • Apple 160 - page 107

    Take Apart Floppy Drive - 47 Caution: The floppy drive cable is fragile and should be handled with care. 3 Lift the locking tab and disconnect the floppy drive cable from the motherboard. Floppy Drive Cable Locking Tab ...

  • Apple 160 - page 108

    Take Apart Floppy Drive - 48 4 Using a T-8 torx driver, remove the five torx screws from the drive retainer. 5 Using a jeweler’s screwdriver, release the drive retainer latch and remove the retainer. Retainer Latch Drive Retainer ...

  • Apple 160 - page 109

    Take Apart Floppy Drive - 49 6 Slide the floppy drive back and lift it from the bottom case. 7 Using a jeweler’s screwdriver, push out the locking tab and remove the floppy drive cable from the drive. Replacement Caution: When connecting the floppy drive cable connector, fold the cable as shown. If it is not folded correctly, the cable could shor ...

  • Apple 160 - page 110

    Take Apart Display Bezel - 5 0 Display Bezel Before you begin, remove the main battery. Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Display Bezel ...

  • Apple 160 - page 111

    Take Apart Display Bezel - 5 1 1 Remove the two plastic plugs. 2 Using a T-8 torx driver, remove the two bezel mounting screws from the display. Screw Plastic Plugs Plastic Plug ...

  • Apple 160 - page 112

    Take Apart Display Bezel - 5 2 3 Pull the display bezel down and away from the display and release the bezel from the mounting tabs at the top and sides of the display. 4 Lift the bezel off the display. Display Display Bezel ...

  • Apple 160 - page 113

    Take Apart Clutches/Display Housing - 5 3 Clutches/Display Housing Before you begin, remove the following: • Main battery • Display bezel Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Right Clutch Left Clutch Display Housing ...

  • Apple 160 - page 114

    Take Apart Clutches/Display Housing - 5 4 Note: This topic includes take apart procedures for the left and right clutch assemblies and the display housing. 1 Cover the keyboard with a clean cloth or sheet of paper. 2 Using a T-8 torx driver, remove the four display mounting screws. 3 Remove the display from the housing and EMI shield. 4 Place the d ...

  • Apple 160 - page 115

    Take Apart Clutches/Display Housing - 5 5 5 Pull off the three clutch covers. 6 Using a T-8 torx driver, remove the six mounting screws from the left and right clutches. 7 Remove the left and right clutches from the display housing. Inverter Cable Right Clutch Clutch Covers ...

  • Apple 160 - page 116

    Take Apart Clutches/Display Housing - 5 6 Replacement Note: Replace the short mounting screws in the top-inside clutch threadings. The top-outside threadings are used to mount the bezel. Replacement Note: To avoid pinching the inverter cable, route the cable behind the top-right corner of the hinge on the right clutch. ...

  • Apple 160 - page 117

    Take Apart Clutches/Display Housing - 5 7 8 Remove the display housing and EMI shield from the case. Display Housing EMI Shield ...

  • Apple 160 - page 118

    Take Apart Inverter Cable - 58 Inverter Cable Before you begin, remove the following: • Main battery • I/O door • Top case • Inverter board • Display bezel Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Inverter Cable ...

  • Apple 160 - page 119

    Take Apart Inverter Cable - 59 1 Pull off the center and right clutch covers. 2 Using a T-8 torx driver, remove the three mounting screws from the right clutch. 3 Remove the clutch from the display housing. Replacement Note: Replace the short mounting screw in the top-inside clutch threading. The top-outside threading is used to mount the bezel. In ...

  • Apple 160 - page 120

    Take Apart Inverter Cable - 60 Replacement Note: To avoid pinching the inverter cable, route the cable behind the top-right corner of the hinge on the right clutch. 4 Disconnect the inverter cable and remove it from the case. ...

  • Apple 160 - page 121

    Take Apart Display - 61 Display Before you begin, remove the following: • Main battery • Display bezel Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Display ...

  • Apple 160 - page 122

    Take Apart Display - 62 Note: This topic includes separate procedures for removing the PowerBook 160/165 FSTN display and the PowerBook 180 active- matrix display. Note: The PowerBook 180 active matrix display module is available to CPRC and international repairers only. ...

  • Apple 160 - page 123

    Take Apart Display - 63 P owerBook 160/165 FSTN Display Caution: The display cable is fragile and should be handled with care. 1 Cover the keyboard with a clean cloth or sheet of paper. 2 Using a T-8 torx driver, remove the four display mounting screws. 3 Remove the display from the housing and EMI shield. Display EMI Shield Display Housing ...

  • Apple 160 - page 124

    Take Apart Display - 64 4 Place the display face- down on the keyboard. 5 Lift the locking tab on the display connector and disconnect the display cable. Locking Tab Adhesive Adhesive ...

  • Apple 160 - page 125

    Take Apart Display - 65 6 Caution: The PowerBook 160/165 display cable is attached to the display with adhesive near the connector and backlight ends of the cable. Carefully pry the cable off the display at these two points. Gently detach the display cable from the back of the display. ...

  • Apple 160 - page 126

    Take Apart Display - 66 7 Disconnect the inverter cable from the display backlight cable. 8 Remove the display. Replacement Note: To avoid pinching the inverter cable, route the cable behind the top-right corner of the hinge on the right clutch. Inverter Cable Right Clutch Inverter Cable Backlight Cable ...

  • Apple 160 - page 127

    Take Apart Display - 67 P owerBook 180 Activ e- Matrix Display Caution: The display cable is fragile and should be handled with care. 1 Lift the locking tab on the display connector and disconnect the display cable. 2 Disconnect the inverter cable. Locking Tab Display Cable Inverter Cable Display Cable ...

  • Apple 160 - page 128

    Take Apart Display - 68 3 Using a T-8 torx driver, remove the four display mounting screws. 4 Remove the display from the housing and EMI shield. Display EMI Shield Housing ...

  • Apple 160 - page 129

    Take Apart Display - 69 Replacement Note: To avoid pinching the inverter cable, route the cable behind the top-right corner of the hinge on the right clutch. Inverter Cable Right Clutch ...

  • Apple 160 - page 130

    Take Apart P B 160/165 Display Cable - 70 PB 160/165 Display Cable Before you begin, remove the following: • Main battery • I/O door • Top case • Inverter board • Interconnect board • Display bezel • PowerBook 160/165 • Display PowerBook 160/165 Display Cable ...

  • Apple 160 - page 131

    Take Apart P B 160/165 Display Cable - 71 Caution: The PowerBook 160/165 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Caution: The display cable is fragile and should be handled with care. 1 Pry the display cable ferrite bead from the case. Ferrite Bead ...

  • Apple 160 - page 132

    Take Apart P B 160/165 Display Cable - 72 2 Pull off the center and left clutch covers. 3 Using a T-8 torx driver, remove the three mounting screws from the left clutch. 4 Remove the clutch from the display housing. Replacement Note: Replace the short mounting screw in the top-inside clutch threading. The top-outside threading is used to mount the ...

  • Apple 160 - page 133

    Take Apart P B 160/165 Display Cable - 73 5 Remove the display cable from the case. Display Cable ...

  • Apple 160 - page 134

    Take Apart PowerBook 180 Display Cable - 74 PowerBook 180 Display Cable Before you begin, remove the following: • Main battery • I/O door • Top case • Inverter board • Interconnect board • Display bezel Di l C bl PowerBook 180 Display Cable ...

  • Apple 160 - page 135

    Take Apart PowerBook 180 Display Cable - 75 Caution: The PowerBook 180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/ Safety. Caution: The display cable is fragile and should be handled with care. 1 Pry the display cable ferrite bead from the case. Ferrite Bead ...

  • Apple 160 - page 136

    Take Apart PowerBook 180 Display Cable - 76 2 Pull off the center and left clutch covers. 3 Using a T-8 torx driver, remove the three mounting screws from the left clutch. 4 Remove the clutch from the display housing. Replacement Note: Replace the short mounting screw in the top-inside clutch threading. The top-outside threading is used to mount th ...

  • Apple 160 - page 137

    Take Apart PowerBook 180 Display Cable - 77 5 Lift the locking tab on the display connector and disconnect the display cable. 6 Remove the display cable from the case. Locking Tab Display Cable ...

  • Apple 160 - page 138

    Service Source K Upgrades Po werBook 160/165/180 ...

  • Apple 160 - page 139

    Upgrades Modem Card - 1 Modem Card Before you begin, remove the following: • Main battery • I/O door • Top case Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. Modem Card ...

  • Apple 160 - page 140

    Upgrades Modem Card - 2 Caution: If you install a third-party modem card, make sure that it does not cover any of the heat sinks on the daughterboard or over the floppy drive. Note: The modem card is an option for the PowerBook 160/165/180. 1 Pinch the release tabs and push out the modem port cover. Modem Port Cover Release Tabs ...

  • Apple 160 - page 141

    Upgrades Modem Card - 3 2 Connect the modem card connector to motherboard connector J8. 3 Install the two mounting screws. Modem Modem Card Connector J8 Connector ...

  • Apple 160 - page 142

    Upgrades Modem Card - 4 4 Affix the FCC modem label to the inside of the I/O door. Align the label with the modem port. 5 Affix the DOC label to the inside of the I/O door. Align the label with the HD-30 SCSI port. Modem Port HD-30 SCSI Port FCC Modem Label DOC Label ...

  • Apple 160 - page 143

    Upgrades PSRAM Expansion Card - 5 PSRAM Expansion Card Before you begin, remove the following: • Main battery • I/O door • Top case Caution: The PowerBook 160/165/180 contains CMOS devices that are very susceptible to ESD damage. Review the ESD precautions in Bulletins/Safety. PSRAM Expansion Card ...

  • Apple 160 - page 144

    Upgrades PSRAM Expansion Card - 6 Caution: Handle the PSRAM card by the edges only. Do not touch any components on the card. Caution: If you install a third-party expansion card, do not remove or cover up any of the heat sinks on the daughterboard. Operating the computer without the heat sinks significantly increases the chance of daughterboard fai ...

  • Apple 160 - page 145

    Upgrades PSRAM Expansion Card - 7 Caution: An incorrectly installed PSRAM card could damage the daugherboard. Note that the expansion connector and the PSRAM card are keyed for proper installation. Do not force the card into the connector, thereby defeating the key. Caution: When installing the card, press down on the edge directly above the connec ...

  • Apple 160 - page 146

    Upgrades PSRAM Expansion Card - 8 1 Connect the PSRAM expansion card to the expansion connector on the daughterboard. PSRAM Expansion Card Expansion Connector PSRAM Expansion Card Expansion Connector ...

  • Apple 160 - page 147

    Upgrades PSRAM Expansion Card - 9 Note: To verify that the upgrade is successful, check the Total Memory message (for systems with virtual memory switched off) or the Built-in Memory message (for systems with virtual memory switched on). The memory size should be 4 MB of soldered RAM plus the RAM on the expansion card. If the memory size is incorre ...

  • Apple 160 - page 148

    Service Source K Exploded V ie w Po werBook 160/165/180 ...

  • Apple 160 - page 149

    Exploded View 1 Rubber Plug 875-0112 Inverter Cable 936-0106 Display Bezel  922-0026 (PB 160), 922-1108 (PB 165), 922-0030 (PB 180) Display 661-0745 (PB 160/165),661-0748 (PB 180) Display Housing 922-0044  Product family configurations may vary. For parts with asterisk (*), refer to parts list. Drive Retainer 922-0009 (17 mm ...

Fabricante Apple Categoría Laptop

Los documentos del dispositivo Apple 160 que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Apple
- manuales de instrucciones 160
- hojas de producto Apple
- folletos informativos
- o etiquetas energéticas Apple 160
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Apple 160.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Apple 160, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Apple 160. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Apple 160.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Apple 160, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Apple 160. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Apple 160.

El manual de instrucciones completo de Apple debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Apple 160 - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Apple 160, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Apple 160 que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Apple 160 - que deben facilitarnos los primeros pasos durante el uso de Apple 160
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Apple 160
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Apple 160 en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Apple 160?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Apple 160, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Apple 160 probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Comentarios (0)