Manual de instrucciones Aiwa HV-FX9000U

118 de páginas 1.82 mb
Descargar

Pasar a la página of 118

Summary
  • Aiwa HV-FX9000U - page 1

    ENGLISH ESP AÑOL F or Assistance And Inf or mation Call T oll Free 1-800-BUY -AIW A (United States and Puer to Rico) FRANÇAIS HV -FX9000 U STEREO VIDEO CASSETTE RECORDER VIDEOGRABADORA ESTEREOFONICA ENREGISTREUR À CASSETTES VIDÉO STÉRÉO OPERA TING INSTRUCTIONS INSTRUCCIONES DE MANEJO MODE D’EMPLOI ...

  • Aiwa HV-FX9000U - page 2

    1 HV -FX9000 U QUICK ST AR T GUIDE W elcome Thank you for purchasing this AIWA product. When you unpack your video cassette recorder for the first time, follow the procedures 1 to 5 below for set up. Y ou will find these accessories in the package box. Please read the various informations on page 1 and 2 of Operating Instructions before installing ...

  • Aiwa HV-FX9000U - page 3

    2 LINE 1 R AUDIO L OUT OUT IN IN (MONO) VIDEO AERIAL (VHF/UHF) RF OUT 2 Connecting Antenna (or CA TV)-VCR-TV Important Connect the AC cord to the AC outlet after all of the connections are complete. 2 Connect the VCR with the supplied antenna cable to the TV's antenna input connector. 1 Connect the TV antenna cable (not supplied) to the VCR. A ...

  • Aiwa HV-FX9000U - page 4

    3 R AUDIO L OUT OUT IN IN (MONO) VIDEO AERIAL (VHF/UHF) RF OUT OUT IN 2 Connect the output on the converter to ANT IN on the VCR with a coaxial cable (not supplied). 3 Connect the VCR with the supplied antenna cable to the TV's antenna input connector. 1 Connect the cable from the CATV system to the input on the CATV converter. CATV System Ant ...

  • Aiwa HV-FX9000U - page 5

    4 3 Setting the language 5 Press j or l to display the desired language. Each time the language changes, the on-screen display language changes. Press MENU to return to the normal screen. 6 4 Press i or k to select LANGUAGE SELECT. 2 Press POWER to turn on the VCR. 3 The on-screen menu can display any of three languages, English, Spanish and French ...

  • Aiwa HV-FX9000U - page 6

    5 4 Setting the Clock You must set the date and time for timer recordings. Press MENU , and press i or k to select CLOCK, then press ENTER/DISPLAY . 2 3 Set DAY, YEAR and TIME as in step 3. 4 Press j or l to set AUTO CLOCK SET to ON. The VCR automatically corrects the clock setting once you set AUTO CLOCK SET to ON. 5 Press j or l to set MONTH, the ...

  • Aiwa HV-FX9000U - page 7

    6 Setting the VCR channels 4 Before starting Make sure the VCR channel is not selected "LINE 1" or "LINE 2." Press MENU , press i or k to select TUNING, then press ENTER/DISPLAY . 2 3 Press i or k to select SOURCE SELECT, then press j or l to display TUNER. Press i or k to select AUTO CHANNNEL SET, then press j or l . All availa ...

  • Aiwa HV-FX9000U - page 8

    ...

  • Aiwa HV-FX9000U - page 9

    ...

  • Aiwa HV-FX9000U - page 10

    ENGLISH 1 Warning To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Explanation of Graphical Symbols The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the products enclosure that may ...

  • Aiwa HV-FX9000U - page 11

    ENGLISH 2 OWNER'S RECORD For your convenience, record the model number and serial number (you will find them on the rear of your set) in the space provided below. Please refer to them when you contact your AIWA dealer in case of difficulty. Model No. Serial No. Power-Cord Protection - This unit is provided with an attachment plug having overlo ...

  • Aiwa HV-FX9000U - page 12

    ENGLISH Welcome Thank you for purchasing this AIWA product. To optimise the performance of this unit, please read through this manual carefully. Main featur es of this VCR VCR Plus+ system and One-Touch Playback You can easily set the timer with the VCR Plus+ system. The recorded TV programs can be played back quickly with One-Touch Playback. MTS ( ...

  • Aiwa HV-FX9000U - page 13

    ENGLISH V U 75-ohm 300-ohm VHF UHF AERIAL (VHF/UHF) RF OUT Connecting the VCR Basic connections PREPARATION 1 2 3 1 2 3 75-ohm coaxial cable (not supplied) 300-ohm twin-lead cable (not supplied) Antenna adaptor (not supplied) To AC outlet To antenna connector Antenna cable (supplied) TV TV Antenna splitter (not supplied) To UHF antenna terminal To ...

  • Aiwa HV-FX9000U - page 14

    ENGLISH V U 75-ohm 300-ohm VHF UHF AERIAL (VHF/UHF) RF OUT AERIAL (VHF/UHF) RF OUT OUT IN V U 75-ohm 300-ohm VHF UHF 5 CA TV connections To connect a CATV system without using a CATV converter 1 2 3 Connect the cable from the CATV system to the AERIAL connector on this VCR. Connect the supplied antenna cable to the RF OUT connector on the VCR and t ...

  • Aiwa HV-FX9000U - page 15

    ENGLISH OUT IN AERIAL (VHF/UHF) RF OUT Connect the cable from the CATV system to the 2-way splitter. Connect one of the output connector of the splitter to the input connector of the CATV converter, and the other to the A/B switch. Connect the output on the converter to the AERIAL connector on this VCR. Connect the RF OUT connector on this VCR to t ...

  • Aiwa HV-FX9000U - page 16

    ENGLISH R AUDIO L OUT OUT IN IN (MONO) LINE 1 VIDEO Additional connections To connect an AV receiver Notes • To receive an AM band radio broadcast on the AV receiver, turn off the VCR. • Install the AM antenna of the AV receiver in a location that avoids interference, as far away from the VCR as possible. • Depending on the AV receiver, it ? ...

  • Aiwa HV-FX9000U - page 17

    ENGLISH Preparing the remote control Inserting the batteries Caution To prevent damage from leakage or explosion, follow the descriptions below. • Insert two supplied R03 (size AAA) batteries with the 0 and 9 marks correctly as illustrated. • Do not mix old batteries with new ones or different types of batteries. • Do not throw the batteries ...

  • Aiwa HV-FX9000U - page 18

    ENGLISH Preparing the remote control (continued) TV manufacturer Code number ADMIRAL 16, 33, 37, 44, 45 AIWA 70 AKAI 01 AMARK 09 AOC 01 BELL & HOWELL 33 BROKSONIC 18, 19 CANDLE 51 CCE 07 CENTURION 08 CINERAL 43 CITIZEN 49, 50, 51, 52, 53, 54, 55 CORONADO 09 CROWN 09 CURTIS MATHES 01, 03, 08, 33, 37, 44 DAEWOO 16, 38, 39, 40, 41, 42, 43 DAYTRON ...

  • Aiwa HV-FX9000U - page 19

    ENGLISH TV manufacturer Code number SAMPO 08 SAMSUNG 01, 08, 09, 25, 68 SANYO 28, 29 SCOTT 01, 08 SEARS 09, 25, 26, 27, 28, 29 SEMP 64 SHARP 09, 22, 23, 24, 60, 66 SIGNATURE 2000 01, 06, 08, 09, 10, 23, 24, 33, 34 SONY 12, 62 SOUNDESIGN 51 SYLVANIA 01, 04, 05, 06, 07, 08, 35, 51 SYMPHONIC 46, 47 TATUNG 11 TEKNIKA 07, 09, 16, 33, 51 TELERENT 09, 33 ...

  • Aiwa HV-FX9000U - page 20

    ENGLISH 1 2 3 Setting the language The on-screen menu can display any of three languages, English, Spanish and French. Before starting Set the VCR/CATV/DBS/TV selector to VCR. Press POWER to turn on the VCR. Press MENU. Press i or k to select SETUP, then press ENTER/DISPLAY. Press i or k to select LANGUAGE SELECT. Press j or l to display the desire ...

  • Aiwa HV-FX9000U - page 21

    ENGLISH 3 Setting the VCR channels Before Auto Channel Memory, this VCR can receive all channels in your area by pressing the CHANNEL i or k button repeatedly. After Auto Channel Memory, you can skip the channels which are not preset with the CHANNEL i or k button. Before starting • Set the VCR/CATV/DBS/TV selector to VCR. • Make sure the VCR c ...

  • Aiwa HV-FX9000U - page 22

    ENGLISH Adding or erasing VCR channels manually If Auto Channel Set does not set the VCR channel, add them manually for recording TV programs. You can also erase the unnecessary VCR channels. Press MENU. Press i or k to select TUNING, then press ENTER/DISPLAY. Press i or k to select TUNING BAND, then press j or l to display TV or CATV. Press i or k ...

  • Aiwa HV-FX9000U - page 23

    ENGLISH 6 7 8 14 Checking the channel set-up to use VCR Plus+ system To set the timer using VCR Plus+ system, you have to check whether the VCR channel numbers match the guide channels which are assigned to the TV stations. If they do not match, the VCR Plus+ system does not function correctly. In this case, coordinate the number. For example For e ...

  • Aiwa HV-FX9000U - page 24

    ENGLISH 15 MENU j / l i / k CLEAR Checking the channel set-up to use VCR Plus+ system (continued) Before starting Set the VCR/CATV/DBS/TV selector to VCR. Press MENU. Press i or k to select SETUP, then press ENTER/DISPLAY. Press i or k to select CHANNEL MAPPING, then press j or l . Press i or k to select GUIDE CH “ 38. ” 1 2 3 4 5 CLOCK PROGRAM ...

  • Aiwa HV-FX9000U - page 25

    ENGLISH 16 If you cannot get a clear playback picture Although the VCR adjusts the tracking automatically, you may need to adjust the tracking manually if the tape quality is too poor. While the VCR is adjusting the tracking automatically, “ A. TRK ” (Automatic Tracking) flashes in the display window. It goes off after the adjustment is complet ...

  • Aiwa HV-FX9000U - page 26

    ENGLISH 17 To watch the picture of a tape during fast- forward or rewind — Skip search Hold down g F FWD/ ] or f REW/ [ during fast- forward or rewind. The VCR switches forward or reverse search. Release the button to return to fast-forward or rewind mode. To skip an advertisement Press AD-SKIP during playback. The VCR searches forward approximat ...

  • Aiwa HV-FX9000U - page 27

    ENGLISH Searching with the index function — Index Search The VCR automatically marks an index signal on the tape each time recording starts. You can use these signals to find the beginning of any recording. Press VISS during playback or stop. Press the number buttons (up to 99) to select the index number. When selecting the numbers less than 10, ...

  • Aiwa HV-FX9000U - page 28

    ENGLISH 19 To stop recording Press s STOP. To pause recording Press a PAUSE/STILL. “ RECP ” appears on the TV screen. To resume recording, press a PAUSE/STILL again. To prevent an accidental recording Break off the erasure prevention tab on the back edge of the cassette. To record over the tape again, cover the gap with adhesive tape. To watch ...

  • Aiwa HV-FX9000U - page 29

    ENGLISH Recording with Instant T imer Recording You can immediately start recording the current channel for a specified time with Instant Timer Recording. Before starting • Insert a cassette with its erasure prevention tab in place. Make sure the tape is longer than the recording time. • Turn on the VCR and TV, and set the TV for VCR reception. ...

  • Aiwa HV-FX9000U - page 30

    ENGLISH 21 1 2 Recording with Instant Timer Recording (continued) To stop, pause, or turn off the power while recording Press s STOP, a PAUSE/STILL or POWER. To extend the recording duration while recording Press w REC/ITR until the new duration you want appears. Tip When the regular recording is resumed by pressing w REC/ITR repeatedly to display ...

  • Aiwa HV-FX9000U - page 31

    ENGLISH Press ENTER/DISPLAY. • The timer information appears on the TV screen. • If you want to extend the recording time, see “ To extend the recording time ” below. Press i or k to select SPEED, then press j or l to select the tape speed, SP, EP or AUTO. If you select AUTO, the VCR determines remaining tape length and switches the speed f ...

  • Aiwa HV-FX9000U - page 32

    ENGLISH 23 Press i or k to select CHANNEL, press j or l to set the VCR channel number. If you have connected the CATV using the CATV converter, set the CHANNEL to match the cable box output channel (usually CH3 or 4). Change the channel on the CATV converter instead of the VCR. Set SPEED and REPEAT as in step 3. For details of SPEED and REPEAT, see ...

  • Aiwa HV-FX9000U - page 33

    ENGLISH AERIAL (VHF/UHF) RF OUT Dubbing Connecting with another VCR Operation Tips • If the other VCR is monaural type, connect one of the audio plugs only to AUDIO IN L (MONO) at the rear. • If you use this VCR for playback, connect the AUDIO/VIDEO OUT jacks on this VCR and the audio/video input jacks on the recording VCR. Note If both units a ...

  • Aiwa HV-FX9000U - page 34

    ENGLISH 25 1 2 3 4 5 6 Recording the Hi-Fi audio The regular audio signal and Hi-Fi audio signal are automatically recorded if the TV program is broadcasted in stereo. No special setting is required for Hi-Fi audio recording. Recording the sound of the MTS Broadcast Before starting • Insert a cassette and select the tape speed. • Set the VCR/CA ...

  • Aiwa HV-FX9000U - page 35

    ENGLISH 3 5 6 7 8 AUDIO OUTPUT STEREO LEFT RIGHT – AUDIO MODE HI-FI HI-FI HI-FI NORMAL AUDIO OUT LEFT Left channel Left channel Right channel Mono RIGHT Right channel Left channel Right channel Mono RF OUT Mono Left channel Right channel Mono Tips • If AUDIO OUTPUT is set to STEREO while playing a prerecorded SAP BILINGUAL audio program, the pr ...

  • Aiwa HV-FX9000U - page 36

    ENGLISH 27 Operation mode On-screen display Identifying the on-screen display items Broadcast type Tape speed Current date Hi-Fi indicator Channel number Current time/tape counter/ remaining tape length Changing the on-screen function display Press ENTER/DISPLAY. Each press changes the on-screen function display as follows: Three presses All indica ...

  • Aiwa HV-FX9000U - page 37

    ENGLISH ADDITIONAL INFORMATION T roubleshooting If the unit does not seem to operate properly, read the instructions again, then check the information below. The POWER button does not operate. Make sure the AC cord is connected securely. The playback picture is noisy. • Make sure the TV is set to the video channel or video input. • Adjust the t ...

  • Aiwa HV-FX9000U - page 38

    ENGLISH 29 Video recording system Rotary 2 head helical scanning system Video head Double azimuth 4 head Tuner system Frequency synthesized tuner TV system M Video signal system NTSC color signal, Usable cassettes 525 lines, 60 fields VHS video cassette Recording/Playback time SP: 3.5 hours with T-210 tape LP: 7 hours with T-210 tape (playback only ...

  • Aiwa HV-FX9000U - page 39

    ENGLISH LINE 2 VIDEO IN/ AUDIO IN L/R jacks Index to parts and controls Front panel Display window POWER button C PLAY button s STOP button w REC (Recording)/ITR (Instant Timer Recording) button a PAUSE/STILL button Cassette compartment Display window Remote sensor CHANNEL N / M buttons z EJECT button = ONE-TOUCH PLAY BACK button Cassette-in indica ...

  • Aiwa HV-FX9000U - page 40

    ENGLISH OK i + – Rear panel Remote control with the front cover opened AERIAL connector AC cord AUDIO OUT R/L/ VIDEO OUT jacks MENU button CHANNEL i / k buttons g F FWD (Fast-forward)/ ] button s STOP button VISS button REC. END SEARCH button SPEED button z EJECT button POWER button Number buttons a PAUSE/STILL button C PLAY button CLEAR button T ...

  • Aiwa HV-FX9000U - page 41

    ENGLISH ...

  • Aiwa HV-FX9000U - page 42

    F or Assistance and Information, Call T oll Free 1-800-BUY -AIWA (United States and Puer to Rico) 8A-JFC-901-01 000113ATO-YX Printed in Korea ...

  • Aiwa HV-FX9000U - page 43

    1 HV -FX9000 U Bienvenido Muchas gracias por haber adquirido este producto AIWA. Cuando desembale su videograbadora por primera vez, siga los procedimientos 1 a 5 siguientes para prepararla. En el cartón de embalaje encontrará los siguientes accesorios. Lea la información de las páginas 1 y 2 del manual de instrucciones antes de instalar o util ...

  • Aiwa HV-FX9000U - page 44

    2 LINE 1 R AUDIO L OUT OUT IN IN (MONO) VIDEO AERIAL (VHF/UHF) RF OUT 2 Conecte la videograbadora con el cable de antena suministrado al conector de entrada de antena del televisor. 2 Conexión de la antena (o sistema de cablevisión) - V ideograbadora - T elevisor Importante Conecte el cable de alimentaci ó n de CA al tomacorriente de CA despu é ...

  • Aiwa HV-FX9000U - page 45

    3 R AUDIO L OUT OUT IN IN (MONO) VIDEO AERIAL (VHF/UHF) RF OUT OUT IN 4 Si el televisor dispone de tomas de entrada de audio/v í deo, conecte la videograbadora y el televisor con los cables de audio y v í deo suministrados. 2 Conecte la salida del convertidor a la entrada ANT IN de la videograbadora con un cable coaxial (no suministrado). 3 Conec ...

  • Aiwa HV-FX9000U - page 46

    4 3 Selección de idioma El men ú en pantalla podr á visualizarse en uno de los tres idiomas siguientes: ingl é s, espa ñ ol, y franc é s. 56 or 2 3 or 4 MENU Presione POWER para conectar la alimentaci ó n de la videograbadora. POWER Presione MENU y despu é s i o k para seleccionar SETUP. A continuaci ó n, presione ENTER/DISPLAY . CLOCK PRO ...

  • Aiwa HV-FX9000U - page 47

    5 Ajuste del reloj Para realizar grabaciones con el temporizador, tendr á que ajustar la fecha y la hora. 4 2 3 45 6 or Mantenga presionado j o l para que el ajuste cambie r á pidamente. MENU ENTER Presione MENU y despu é s i o k para seleccionar RELOJ. A continuaci ó n, presione ENTER/DISPLAY . RELOJ PROGRAMA SINTONIZAR AJUSTAR SELEC. EJECUTAR ...

  • Aiwa HV-FX9000U - page 48

    6 Sintonización de los canales de la videograbadora Antes de comenzar Compruebe que no ha seleccionado el canal de la videograbadora en “ LINE1 ” o “ LINE2 ” . 5 2 3 5 Presione MENU , presione i o k para seleccionar SINTONIZAR, y despu é s presione ENTER/DISPLAY . RELOJ PROGRAMA SINTONIZAR AJUSTAR SELEC. EJECUTAR PULSE PARA SALIR. ENTER M ...

  • Aiwa HV-FX9000U - page 49

    ESP AÑOL 1 Advertencia Para reducir el riesgo de incendios o descargas eléctricas, no exponga esta unidad a la lluvia ni a la humedad. Explicación de los símbolos El símbolo del rayo con la punta de flecha en el interior del triángulo equilátero tiene la finalidad de avisar al usuario de la presencia de “tensiones peligrosas” sin aislar ...

  • Aiwa HV-FX9000U - page 50

    ESP A Ñ OL 2 REGISTRO DEL PROPIETARIO Por motivos de conveniencia, anote el n ú mero de modelo y el n ú mero de serie (se encuentran en el panel posterior de la unidad) en el espacio ofrecido a continuaci ó n. Refi é rase a ellos cuando se ponga en contacto con su proveedor AIWA en caso de dificultad. N ú mero de modelo N ú mero de serie ANT ...

  • Aiwa HV-FX9000U - page 51

    ESP A Ñ OL Indice ¡Bienvenido¡ Muchas gracias por la adquisici ó n de este producto AIWA. Para sacar el m á ximo partido a esta unidad, lea atentamente este manual. Características principales de esta videograbadora Sistema VCR Plus+ y reproducci ó n instant á nea Usted podr á programar f á cilmente el temporizador con el sistema VCR Plus ...

  • Aiwa HV-FX9000U - page 52

    ESP A Ñ OL R AUDIO L OUT OUT IN IN (MONO) LINE 1 VIDEO V U 75-ohm 300-ohm VHF UHF AERIAL (VHF/UHF) RF OUT Conexi ó n de la videograbadora Conexiones b á sicas PREPARATIVOS 1 2 3 4 1 2 3 Cable coaxial de 75 ohmios (no suministrado) Cable bifilar plano de 300 ohmios (no suministrado) Adaptador de antena (no suministrado) Cable de CA A una toma de ...

  • Aiwa HV-FX9000U - page 53

    ESP A Ñ OL V U 75-ohm 300-ohm VHF UHF AERIAL (VHF/UHF) RF OUT 5 AERIAL (VHF/UHF) RF OUT OUT IN V U 75-ohm 300-ohm VHF UHF Conexiones a un sistema de cablevisi ó n Para conectar un sistema de cablevisi ó n sin utilizar convertidor de cablevisi ó n 2 3 Conecte el cable del sistema de cablevisi ó n al conector AERIAL de esta videograbadora. Conec ...

  • Aiwa HV-FX9000U - page 54

    ESP A Ñ OL OUT IN AERIAL (VHF/UHF) RF OUT 1 2 4 3 5 Conecte el cable del sistema de cablevisi ó n al divisor bidireccional. Conecte una de las salidas del divisor a la entrada del convertidor de cablevisi ó n, y la otra al conmutador A/B. Conecte la salida del convertidor al conector AERIAL de esta videograbadora. Conecte el conector RF OUT de e ...

  • Aiwa HV-FX9000U - page 55

    ESP A Ñ OL R AUDIO L OUT OUT IN IN (MONO) LINE 1 VIDEO 7 Conexiones adicionales Para conectar un receptor de audio/v í deo Notas • Para recibir una banda de radiodifusi ó n en el receptor de audio/v í deo, desconecte la alimentaci ó n de la videograbadora. • Instale la antena de AM del receptor de audio/video en un lugar que evite las inte ...

  • Aiwa HV-FX9000U - page 56

    ESP A Ñ OL Si conecta un televisor con un cable de antena Si conecta el televisor al conector RF OUT con un cable de antena suministrado, ajuste el selector de canales de la parte posterior en 3 CH o 4 CH (no utilizado para emisiones), y seleccione el mismo canal en el televisor. (Para ver las im á genes de la videograbadora, ajuste el canal 3 ch ...

  • Aiwa HV-FX9000U - page 57

    ESP A Ñ OL 9 Preparaci ó n del controlador remoto (continuaci ó n) Control de televisores y convertidores de cablevisi ó n/DBS El controlador remoto puede controlar televisores de un gran n ú mero de fabricantes, as í como convertidores de cablevisi ó n/ DBS. Para gobernar tales televisores y convertidores para cablevisi ó n, introduzca los ...

  • Aiwa HV-FX9000U - page 58

    ESP A Ñ OL Fabricante de convertidor de N ú mero de c ó digo cablevisi ó n ALLEGRO 46 ARCHER 39 CABLEVIEW 39 CITIZEN 39 CURTIS MATHES 15 EAGLE 24, 25, 28 GEMINI 04, 05, 22, 23 GENERAL ELECTRIC 43 GENERAL INSTRUMENT 04, 05, 07, 09 GOBRAND 39 HAMLIN 33, 34, 35 JERROLD 04, 06, 07, 08, 09, 10, 17, 39 KALE VISION 29 MACOM 03, 40, 41 MAGNAVOX 24, 25, ...

  • Aiwa HV-FX9000U - page 59

    ESP A Ñ OL 11 CLOCK PROGRAM TUNING SETUP SELECT ENTER TO EXIT PRESS ENTER MENU Selecci ó n de idioma El men ú en pantalla podr á visualizarse en uno de los tres idiomas siguientes: ingl é s, espa ñ ol, y franc é s. Antes de comenzar Ajuste el selector VCR/CATV/DBS/TV en VCR. Presione POWER para conectar la alimentaci ó n de la videograbador ...

  • Aiwa HV-FX9000U - page 60

    ESP A Ñ OL Presione j o l para ajustar AUTOM. AJUSTADO en SI. La videograbadora corrige el reloj autom á ticamente una vez ajustado AUTOM. AJUSTADO en SI. Presione MENU para poner en funcionamiento el reloj. Volver á a aparecer la pantalla normal. Para corregir los d í gitos durante el ajuste Antes de presionar MENU en el paso 6, presione i par ...

  • Aiwa HV-FX9000U - page 61

    ESP A Ñ OL 13 Presione i o k para seleccionar AUTO PROGRAMATION, y despu é s presione j o l . Los canales disponibles en su zona se explorar á n y almacenar á n en la memoria de la videograbadora. Despu é s de la exploraci ó n, aparece la pantalla del televisor del paso 3. Para volver a la pantalla normal, presione MENU. Si en el visualizador ...

  • Aiwa HV-FX9000U - page 62

    ESP A Ñ OL WCBS New York CBS 02 02 WNBC New York NBC 04 04 WNYW New York NYW 05 05 WABC New York ABC 07 07 A&E Arts & Entertainment 39 44 BET Black Entertainment 57 23 CNBC Consumer News & Business 23 16 CSPAN Government Business 28 54 DSC Discovery Channel 37 63 DIS Disney Channel 53 27 MAX Cinemax 45 15 SHO Showtime 38 14 USA USA Net ...

  • Aiwa HV-FX9000U - page 63

    ESP A Ñ OL 15 1 2 3 4 5 6 7 RELOJ PROGRAMA SINTONIZAR AJUSTAR SELEC. EJECUTAR PULSE PARA SALIR. ENTER MENU GUIDA CANALES CANAL 37 38 38 39 40 41 42 – – – – – – – – – – – – – – – – – – – – – MAPA DE CANALES SELEC. ADJUSTAR PULSE PARA SALIR. MENU GUIDA CANALES CANAL 37 38 38 39 40 41 42 – – – 14 – ? ...

  • Aiwa HV-FX9000U - page 64

    ESP A Ñ OL Si no puede obtener im á genes de reproducci ó n claras Aunque la videograbadora ajusta autom á ticamente la alineaci ó n, es posible que usted necesite ajustarla manualmente si la calidad de la cinta es mala. Mientras la videograbadora ajusta la alineaci ó n autom á ticamente, “ A. TRK ” (alineaci ó n autom á tica) parpadea ...

  • Aiwa HV-FX9000U - page 65

    ESP A Ñ OL 17 Reproducci ó n de una cinta (continuaci ó n) Para ver la imagen de una cinta durante el avance r á pido o el rebobinado — B ú squeda con omisi ó n Mantenga presionado g F FWD/ ] o f REW/ [ durante el avance r á pido o el rebobinado. La videograbadora cambiar á entre la b ú squeda progresiva o regresiva. Deje de presionar el ...

  • Aiwa HV-FX9000U - page 66

    ESP A Ñ OL 1 3 Notas • Usted podr á utilizar tambi é n el visualizador para comprobar el n ú mero de í ndice que haya especificado. “ VISS ” y el n ú mero de í ndice aparecer á n en el visualizador. • Es posible que las se ñ ales de í ndice deber á n estar separadas por lo menos 1 minuto en el modo SP, 2 minutos en el modo LP, y ...

  • Aiwa HV-FX9000U - page 67

    ESP A Ñ OL Grabaci ó n de un programa de televisi ó n Antes de comenzar • Encienda el televisor y aj ú stelo en el modo de recepci ó n de videograbadora. • Ajuste el selector VCR/CATV/DBS/TV en VCR. Inserte un videocasete con la leng ü eta de protecci ó n contra el borrado intacta. La alimentaci ó n se conectar á autom á ticamente. Pr ...

  • Aiwa HV-FX9000U - page 68

    ESP A Ñ OL Grabaci ó n con el temporizador instant á neo Usted podra comenzar a grabar instant á neamente el canal que est é viendo durante un tiempo especificado con el temporizador grabaci ó n instant á neo. Antes de comenzar • Inserte un videocasete con la leng ü eta de protecci ó n contra el borrado intacta. Aseg ú rese de que la ci ...

  • Aiwa HV-FX9000U - page 69

    ESP A Ñ OL 21 Para parar, hacer una pausa, o desconectar la alimentaci ó n durante la grabaci ó n Presione s STOP, a PAUSE/STILL o POWER. Para prolongar el tiempo de grabaci ó n durante la é sta Presione w REC/ITR hasta que aparezca la nueva duraci ó n que desee. Sugerencia Cuando reanude la grabaci ó n normal presionando repetidanente w REC ...

  • Aiwa HV-FX9000U - page 70

    ESP A Ñ OL 8:00 9:00 10:00 1 1:00 Prog.1 Prog.2 Prog.3 3 Presione ENTER/DISPLAY. • En la pantalla del televisor aparecer á la informaci ó n sobre el temporizador. • Si desea ampliar el tiempo de grabaci ó n, consulte “ Para prolongar el tiempo de grabaci ó n ” m á s adelante. Presione i o k para seleccionar VEL., y despu é s presione ...

  • Aiwa HV-FX9000U - page 71

    ESP A Ñ OL Presione i o k para seleccionar CANAL, y despu é s presione j o l para introducir el n ú mero del canal de la videograbadora. Si ha conectado un convertidor de cablevisi ó n, ajuste CANAL al canal de salida de dicho convertidor (normalmente 3 o 4). Cambie el canal del convertidor de cablevisi ó n en vez del de la videograbadora. Aju ...

  • Aiwa HV-FX9000U - page 72

    ESP A Ñ OL AERIAL (VHF/UHF) RF OUT Sugerencias • Si la otra videograbadora es de tipo monoaural, conecte solamente una de las tomas de audio a AUDIO IN L (MONO) del panel posterior. • Si desea utilizar esta videograbadora para reproducci ó n, conecte las tomas AUDIO/ VIDEO OUT de la misma y las tomas de entrada de audio/v í deo de la videogr ...

  • Aiwa HV-FX9000U - page 73

    ESP A Ñ OL RELOJ PROGRAMA SINTONIZAR AJUSTAR SELEC. EJECUTAR PULSE PARA SALIR. ENTER MENU Grabaci ó n de audio Hi-Fi Si el programa se emite en est é reo, la se ñ al de audio normal y la se ñ al de audio Hi-Fi se grabar á n autom á ticamente. Para grabar la se ñ al de audio Hi-Fi no es necesario hacer ning ú n ajuste especial. Grabaci ó n ...

  • Aiwa HV-FX9000U - page 74

    ESP A Ñ OL Presione j o l para seleccionar el modo de salida de audio. ESTEREO : Se escuchar á el sonido est é reo. IZQ. : El sonido del canal izquierdo se escuchar á a trav é s ambos canales. DER. : El sonido del canal derecho se escuchar á a trav é s ambos canales. Presione i o k para seleccionar MODO DE AUDIO. Presione j o l para seleccio ...

  • Aiwa HV-FX9000U - page 75

    ESP A Ñ OL V isualizaci ó n en pantalla Identificaci ó n de los elementos visualizados en la pantalla Para cambiar la visualizaci ó n de la funci ó n de visualizaci ó n en pantalla Presione ENTER/DISPLAY. Cada vez que lo presione, la visualizaci ó n de la funci ó n de visualizaci ó n en pantalla cambiar á de la forma siguiente: RELOJ PROG ...

  • Aiwa HV-FX9000U - page 76

    ESP A Ñ OL INFORMACION ADICIONAL Soluci ó n de problemas Si esta unidad parece no funcionar adecuadamente, lea de nuevo las instrucciones, y despu é s compruebe la tabla siguiente. El bot ó n POWER no funciona. Compruebe si el cable de CA est á conectado con seguridad. Las im á genes reproducidas tienen ruido. • Compruebe si el televisor es ...

  • Aiwa HV-FX9000U - page 77

    ESP A Ñ OL 29 Especificaciones Sistema de v í deo grabaci ó n Sistema de exploraci ó n helicoidal con 2 cabezas giratorias Cabezas de v í deo 4 cabezas de acimut doble Sistema de sintonizador Sintonizador de frecuencia sintetizada Sistema de televisi ó nM Sistema de se ñ al de v í deo Se ñ al de color NTSC, Videocasetes utilizables 525 l ? ...

  • Aiwa HV-FX9000U - page 78

    ESP A Ñ OL TIMER VCR ST SP LP EP REC Hi-Fi SAP REM Componentes y controles Panel frontal V isualizdor Bot ó n de reproducci ó n instant á nea ( = ONE-TOUCH PLAY BACK) Indicador de reloj/contador de la cinta/operaci ó n de la cinta Indicador REC (grabaci ó n) Indicador de videocasete insertado Indicador de sonido est é reo (ST) Indicador de p ...

  • Aiwa HV-FX9000U - page 79

    ESP A Ñ OL OK i + – Panel posterior Controlador remoto con la tapa delantera abierta Selector de canal Conector de antene (RF OUT) Tomas de l í nea 1/entrada de audio (canales izquierdo/dereche)/v í deo (LINE 1 AUDIO IN R/L (MONO) VIDEO IN) Entrada de CA Salida de audio (canales izquierdo/dereche)/v í deo (AUDIO OUT R/L/VIDEO OUT) Botones de ...

  • Aiwa HV-FX9000U - page 80

    ESP A Ñ OL ...

  • Aiwa HV-FX9000U - page 81

    1 HV -FX9000 U Bienvenue Merci pour l’achat de cet appareil AIWA. Si vous déballez votre magnétoscope pour la première fois, veuillez effectuer les opérations 1 à 5 ci-dessous pour l’installation. V ous trouverez les accessoires suivants dans le carton d’emballage. Veuillez lire attentivement les informations figurant page 1 et page 2 du ...

  • Aiwa HV-FX9000U - page 82

    2 LINE 1 R AUDIO L OUT OUT IN IN (MONO) VIDEO AERIAL (VHF/UHF) RF OUT 2 Raccordement de l’antenne (ou du réseau câblé), du magnétoscope et du téléviseur Importante Raccordez le cordon d ’ alimentation secteur à la prise secteur quand toutes les autres connexions ont é t é faites. 2 Raccordez le magn é toscope au connecteur d ’ entr ...

  • Aiwa HV-FX9000U - page 83

    3 R AUDIO L OUT OUT IN IN (MONO) VIDEO AERIAL (VHF/UHF) RF OUT OUT IN 4 Si votre t é l é viseur est muni de prises d ’ entr é e audio/vid é o, raccordez le magn é toscope et le t é l é viseur à l ’ aide des c â bles audio et vid é o fournis. 2 Raccordez la sortie du convertisseur à ANT IN du magn é toscope avec un c â ble coaxial ( ...

  • Aiwa HV-FX9000U - page 84

    4 3 Sélection de la langue Le menu peut ê tre affich é à l ’é cran dans une des trois langues suivantes : Anglais, espagnol et fran ç ais. 56 or Appuyez sur MENU pour revenir à l ’é cran normal. 2 POWER Appuyez sur POWER pour allumer le magn é toscope. 3 MENU ENTER Appuyez sur MENU , puis sur i ou k pour s é lectionner SETUP (installa ...

  • Aiwa HV-FX9000U - page 85

    5 Réglage de l’horloge Vous devez r é gler la date et l ’ heure pour les enregistrements programm é s. 4 2 45 6 or Appuyez sur j ou l et maintenez cette touche enfonc é e pour modifier rapidement le r é glage. Appuyez sur MENU , puis sur i ou k pour s é lectionner HORLOGE, puis appuyez sur ENTER/DISPLAY . Appuyez sur j ou l pour r é gler ...

  • Aiwa HV-FX9000U - page 86

    6 Préréglage des canaux Pr é paratifs V é rifiez que le canal de magn é toscope n ’ est pas s é lectionnsur LINE1 ou LINE2. 5 2 3 5 MENU Appuyez sur MENU , puis sur i ou k pour s é lectionner SYNTONISATION. Appuyez ensuite sur ENTER/DISPLAY . Appuyez sur i ou k pour s é lectionner S É LECTION SOURCE, puis sur j ou l pour afficher TUNER. ...

  • Aiwa HV-FX9000U - page 87

    FRANÇAIS 1 Avertissement Pour prévenir tout risque d’incendie ou d’électrocution, garder cet appareil à l’abri de la pluie et de l’humidité. Explication des symboles graphiques : Un éclair fléché inscrit dans un triangle équilatéral est destiné à alerter l’utilisateur de la présence à l’intérieur de l’appareil d’une ? ...

  • Aiwa HV-FX9000U - page 88

    FRAN Ç AIS 2 REFERENCES UTILISATEUR Pour votre facilit é , consignez la d é signation du mod è le et le num é ro de s é rie de cet appareil (qui se trouvent à l ’ arri è re) dans les cases ci-dessous. Signalez ces r é f é rences lorsque vous prenez contact avec votre revendeur Aiwa en cas de probl è me. Num é ro du mod è le Num é ro ...

  • Aiwa HV-FX9000U - page 89

    FRAN Ç AIS Bienvenue Merci pour l ’ achat de cet appareil AIWA. Pour tirer le meilleur profit de cet appareil, veuillez lire attentivement ce mode d ’ emploi. Principales caractéristiques de ce magnétoscope Syst è me VCR Plus+ et lecture monotouche Le r é glage de la minuterie est simplifi é par le syst è me VCR Plus+. Les programmes de ...

  • Aiwa HV-FX9000U - page 90

    FRAN Ç AIS V U 75-ohm 300-ohm VHF UHF AERIAL (VHF/UHF) RF OUT Raccordement du magn é toscope Raccordements de base PRÉPARATIFS 1 2 3 aux prises d ’ entr é e audio D é branchez le c â ble d ’ antenne du t é l é viseur et raccordez-le au connecteur AERIAL sur le panneau arri è re du magn é toscope. Si le c â ble est un c â ble coaxial ...

  • Aiwa HV-FX9000U - page 91

    FRAN Ç AIS AERIAL (VHF/UHF) RF OUT OUT IN V U 75-ohm 300-ohm VHF UHF V U 75-ohm 300-ohm VHF UHF AERIAL (VHF/UHF) RF OUT Raccordement au r é seau c â bl é Pour raccorder le magn é toscope au r é seau c â bl é sans convertisseur 1 2 3 Raccordez le c â ble du syst è me CATV au connecteur AERIAL de ce magn é toscope. Raccordez le c â ble d ...

  • Aiwa HV-FX9000U - page 92

    FRAN Ç AIS 6 1 2 4 3 5 Raccordez le c â ble du r é seau c â bl é au diviseur 2 voies. Raccordez une sortie du diviseur à l ’ entr é e du convertisseur et l ’ autre sortie au commutateur A/B. Raccordez la sortie du convertisseur au connecteur AERIAL de ce magn é toscope. Raccordez le connecteur RF OUT de ce magn é toscope au commutateur ...

  • Aiwa HV-FX9000U - page 93

    FRAN Ç AIS Raccordements suppl é mentaires Pour raccorder un ampli-tuner audiovisuel Remarques • Pour recevoir une é mission radio de la gamme AM sur l ’ ampli-tuner audiovisuel, mettez le magn é toscope hors tension. • Installez l ’ antenne AM du r é cepteur AV en un endroit sans interf é rences, aussi loin que possible du magn é to ...

  • Aiwa HV-FX9000U - page 94

    FRAN Ç AIS Lorsqu ’ un t é l é viseur est raccord é par un c â ble d ’ antenne Lorsque le t é l é viseur est raccord é au connecteur RF OUT à l ’ aide du c â ble d ’ antenne fourni, r é glez le s é lecteur de canal du panneau arri è re sur 3 CH ou 4 CH (canal non utilis é pour la r é ception des é missions de t é l é visio ...

  • Aiwa HV-FX9000U - page 95

    FRAN Ç AIS Preparation de la t é l é commande (suite) Commande des t é l é viseurs et des syst è mes CA TV/DBS La t é l é commande peut piloter des t é l é viseurs de nombreuses marques et des convertisseurs CATV/DBS. Pour pouvoir faire fonctionner votre t é l é viseur et votre convertisseur, enregistrez sur la t é l é commande le cod ...

  • Aiwa HV-FX9000U - page 96

    FRAN Ç AIS Fabricant de TV Code SAMPO 08 SAMSUNG 01, 08, 09, 25, 68 SANYO 28, 29 SCOTT 01, 08 SEARS 09, 25, 26, 27, 28, 29 SEMP 64 SHARP 09, 22, 23, 24, 60, 66 SIGNATURE 2000 01, 06, 08, 09, 10, 23, 24, 33, 34 SONY 12, 62 SOUNDESIGN 51 SYLVANIA 01, 04, 05, 06, 07, 08, 35, 51 SYMPHONIC 46, 47 TATUNG 11 TEKNIKA 07, 09, 16, 33, 51 TELERENT 09, 33 YHO ...

  • Aiwa HV-FX9000U - page 97

    FRAN Ç AIS 1 2 3 4 R é glage de l ’ horloge Vous devez r é gler la date et l ’ heure pour les enregistrements programm é s. Avant de commencer R é glez le s é lecteur VCR/CATV/DBS/TV sur VCR. Appuyez sur MENU. Appuyez sur i ou k pour s é lectionner HORLOGE, puis appuyez sur ENTER/DISPLAY. Appuyez sur j ou l pour r é gler le mois (MOIS), ...

  • Aiwa HV-FX9000U - page 98

    FRAN Ç AIS 1 2 Pr é r é glage des canaux Avant d ’ ex é cuter une recherche automatique, ce magn é toscope peut recevoir tous les canaux de votre r é gion en appuyant plusieurs fois sur la touche CHANNEL i ou k . Une fois que les canaux ont é t é m é moris é s automatiquement, vous pouvez ignorer ceux qui ne sont pas pr é s é lectionn ...

  • Aiwa HV-FX9000U - page 99

    FRAN Ç AIS Addition ou ef facement manuels de canaux Si le pr é r é glage automatique des canaux ne permet pas d ’ enregistrer les canaux correctement, ajoutez ces derniers manuellement pour l ’ enregistrement des programmes de t é l é vision. Vous pouvez aussi effacer les canaux qui ne sont pas n é cessaires. Appuyez sur MENU. Appuyez su ...

  • Aiwa HV-FX9000U - page 100

    FRAN Ç AIS V é rification de la configuration des canaux pour utiliser le syst è me VCR Plus+ Avant de programmer des enregistrements à l ’ aide du syst è me VCR Plus+, vous devez v é rifier si les num é ros des canaux pr é r é gl é s correspondent aux canaux guides qui sont affect é s aux canaux de t é l é vision. Si ce n ’ est pa ...

  • Aiwa HV-FX9000U - page 101

    FRAN Ç AIS 15 Avant de commencer R é glez le s é lecteur VCR/CATV/DBS/TV sur VCR. Appuyez sur MENU. Appuyez sur i ou k pour s é lectionner INSTALLATION, puis appuyez sur ENTER/ DISPLAY. Appuyez sur i ou k pour s é lectionner CONFIGURATION CANAUX, puis appuyez sur j ou l . Appuyez sur i ou k pour s é lectionner GUIDE CANAL “ 38 ” . 1 2 3 4 ...

  • Aiwa HV-FX9000U - page 102

    FRAN Ç AIS Si vous n ’ obtenez pas d ’ image nette Bien que l ’ alignement soit r é gl é automatiquement, vous devrez peut- ê tre le r é gler manuellement si la cassette est de mauvaise qualit é . Durant le r é glage automatique de l ’ alignement par le magn é toscope, “ A. TRK ” (alignement automatique) clignote dans la fen ê ...

  • Aiwa HV-FX9000U - page 103

    FRAN Ç AIS 17 Diverses fonctions de recherche Avant de commencer R é glez le s é lecteur VCR/CATV/DBS/TV sur VCR. Rembobinage ou avance rapide jusqu ’à un point sp é cifique — M é morisation d ’ un point Appuyez sur CLEAR à l ’ endroit que vous voulez pouvoir localiser ult é rieurement. • Le compteur de bande dans la fen ê tre d ...

  • Aiwa HV-FX9000U - page 104

    FRAN Ç AIS 1 3 VISS 03 Num é ro d ’ index V. SEARCH 03 FF SP FF ou REW appara î t. V. SCAN 00 FF SP Recherche avec la fonction d ’ indexation — Recherche d ’ index Le mag é toscope inscrit automatiquement un index sur la bande chaque fois qu ’ un enregistrement commence. Vous pouvez utiliser ces signaux pour localiser le d é but de c ...

  • Aiwa HV-FX9000U - page 105

    FRAN Ç AIS 19 Enregistrement d ’ un programme de t é l é vision Avant de commencer • Mettez le t é l é viseur sous tension et r é glez-le pour la r é ception du magn é toscope. • R é glez le s é lecteur VCR/CATV/DBS/TV sur VCR. Ins é rez une cassette dont l ’ ergot de protection est intact. Le magn é toscope est mis sous tension ...

  • Aiwa HV-FX9000U - page 106

    FRAN Ç AIS Revue du passage enregistr é — Lecture monotouche L ’ utilisation de la lecture monotouche apr è s VCR Plus+ (page 21) ou l ’ enregistrement programm é (page 23) est pratique. En effet, vous pouvez effectuer un enregistrement programm é et reproduire le passage qui vient d ’ê tre enregistr é avec la minuterie en appuyant s ...

  • Aiwa HV-FX9000U - page 107

    FRAN Ç AIS 21 Pour arr ê ter, interrompre l ’ enregistrement, ou mettre le magn é toscope hors tension pendant l ’ enregistrement Appuyez sur s STOP, a PAUSE/STILL ou POWER. Pour prolonger le temps d ’ enregistrement pendant l ’ enregistrement Appuyez sur w REC/ITR jusqu ’à ce que le nouveau temps souhait é apparaisse sur l ’ affic ...

  • Aiwa HV-FX9000U - page 108

    FRAN Ç AIS 22 3 4 5 6 7 8:00 9:00 10:00 1 1:00 Prog.1 Prog.2 Prog.3 Pour prolonger le temps d ’ enregistrement Apr è s l ’é tape 3, appuyez sur i ou k pour s é lectionner ARR Ê T, puis appuyez sur j ou l pour modifier l ’ heure de fin d ’ enregistrement. Si deux programmes se chevauchent Les parties superpos é es seront effac é es et ...

  • Aiwa HV-FX9000U - page 109

    FRAN Ç AIS Appuyez sur i ou k pour s é lectionner CANAL, puis appuyez sur j ou l pour s é lectionner le canal. Si vous avez raccord é le magn é toscope au r é seau c â bl é avec un convertisseur, r é glez CANAL sur le canal de sortie du convertisseur (en g é n é ral CH3 ou 4). Changez le canal sur le convertisseur, pas sur le magn é tos ...

  • Aiwa HV-FX9000U - page 110

    FRAN Ç AIS Pr é paratifs S é lectionnez la vitesse de d é filement de la bande. Ins é rez une cassette pr é -enregistr é e dans l ’ autre magn é toscope (lecteur). Ins é rez une cassette vierge avec son ergot de protection intact dans le magn é toscope HV-FX9000 (enregistreur). Appuyez plusieurs fois sur la touche 0/INPUT pour afficher ...

  • Aiwa HV-FX9000U - page 111

    FRAN Ç AIS Enregistrement du son audio Hi-Fi Le signal audio ordinaire et le signal audio Hi-Fi sont automatiquement enregistr é s si le programme de t é l é vision est en st é r é o. Aucun r é glage sp é cial n ’ est n é cessaire pour l ’ enregistrement d ’ un son Hi-Fi. Enregistrement du son d ’ une é mission MTS Pr é paratifs ...

  • Aiwa HV-FX9000U - page 112

    FRAN Ç AIS 6 26 Signaux enregistr é s et fournis d ’ une é mission MTS 2 1 Lecture d ’ un enregistrement MTS Avant de commencer R é glez le s é lecteur VCR/CATV/DBS/TV sur VCR. Appuyez sur MENU. Appuyez sur i ou k pour s é lectionner INSTALLATION, puis appuyez sur ENTER/ DISPLAY. Appuyez sur i ou k pour s é lectionner SORTIE AUDIO. Appuy ...

  • Aiwa HV-FX9000U - page 113

    FRAN Ç AIS 1 2 3 4 5 HORLOGE PROGRAMME SYNTONISATION INSTALLATION CHOISIR CONFIRMER POUR SORTIR PRESSER ENTER MENU Remarques • Le compteur de bande et l ’ indicateur de longueur de bande restante apparaissent seulement quand une cassette est ins é r é e. De m ê me, l ’ indicateur de longueur de bande restante appara î t apr è s une op ? ...

  • Aiwa HV-FX9000U - page 114

    FRAN Ç AIS INFORMATIONS COMPL É MENTAIRES En cas de panne Si le magn é toscope ne semble pas fonctionner normalement, relisez les instructions du mode d ’ emploi, puis consultez la liste suivante. La touche POWER ne fonctionne pas. Veillez à ce que le cordon d ’ alimentation soit bien branch é . L ’ image de lecture est de mauvaise quali ...

  • Aiwa HV-FX9000U - page 115

    FRAN Ç AIS 29 Sp é cifications Syst è me d ’ enregistrement vid é o Balayage h é lico ï dal par 2 t ê tes rotatives T ê tes vid é o4 t ê tes double azimut Tuner Tuner à synth è se de fr é quence Standard de t é l é vision M Signal vid é o Signal couleur NTSC, Cassette utilisable 525 lignes, 60 trames Cassette vid é o VHS Temps d ...

  • Aiwa HV-FX9000U - page 116

    FRAN Ç AIS 30 TIMER VCR ST SP LP EP REC Hi-Fi SAP REM Afficheur Composants et commandes Panneau avant Af ficheur Interrupteur d ’ alimentation (POWER) Indicateur st é r é o (ST) Indicateur d ’é mission audio secondaire (SAP) Prises d ’ entr é e ligne 2/ audio gauche/droite/vid é o (LINE 2/AUDIO IN L/R/ VIDEO IN) Indicateur de longueur d ...

  • Aiwa HV-FX9000U - page 117

    FRAN Ç AIS OK i + – L Panneau arri è re T é l é commande avec couvercle avant ouvert S é lecteur de canal (CHANNEL) Prises d ’ entr é e ligne 1/audio (gauche/droite)/vid é o (LINE 1 AUDIO IN R/L (MONO)/VIDEO IN) Cordon d ’ alimentation secteur Audio (gauche/droite)/vid é o (AUDIO OUT R/L/ VIDEO OUT) Touche d ’ alimentation (POWER) T ...

  • Aiwa HV-FX9000U - page 118

    FRAN Ç AIS ...

Fabricante Aiwa Categoría Camcorder

Los documentos del dispositivo Aiwa HV-FX9000U que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Aiwa
- manuales de instrucciones HV-FX9000U
- hojas de producto Aiwa
- folletos informativos
- o etiquetas energéticas Aiwa HV-FX9000U
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Aiwa HV-FX9000U.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Aiwa HV-FX9000U, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Aiwa HV-FX9000U. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Aiwa HV-FX9000U.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Aiwa HV-FX9000U, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Aiwa HV-FX9000U. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Aiwa HV-FX9000U.

El manual de instrucciones completo de Aiwa debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Aiwa HV-FX9000U - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Aiwa HV-FX9000U, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Aiwa HV-FX9000U que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Aiwa HV-FX9000U - que deben facilitarnos los primeros pasos durante el uso de Aiwa HV-FX9000U
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Aiwa HV-FX9000U
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Aiwa HV-FX9000U en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Aiwa HV-FX9000U?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Aiwa HV-FX9000U, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Aiwa HV-FX9000U probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Comentarios (0)