-
Craftsman 315.11401 - page 1
Operator's Manual 19.2 VOLT NAILER/STAPLER Model No. 315.114010 Save this manual for future reference • Safety • Features • Operation • Maintenance • Parts List WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Customer Help Line: 1-800-932-3188 Sears, Roebu ...
-
Craftsman 315.11401 - page 2
• General Safety Rules ................................................................................................................................................. 3-4 • Specific Safety Rules ................................................................................................................................................. 4-5 ...
-
Craftsman 315.11401 - page 3
_hj WARNING: Read and understand all instruc- tions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS WORK AREA • Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. • Do not operate power tools in explosive atmo- sp ...
-
Craftsman 315.11401 - page 4
SERVICE • Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. • When servicing a tool, use only identical replace- ment parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Ma ...
-
Craftsman 315.11401 - page 5
_ WARNING: Never use a battery thathas been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped battery immediately. Failure to heed this warning can result in serious personal injury. • Before using battery charger, read all instructions and cautionary markings in this manual, on battery cha ...
-
Craftsman 315.11401 - page 6
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL V A Hz min n o .../min A 0 @ NAME Volts Amperes Hertz Minutes Alternating Current Direct Current No Load Speed Revolutions or Reciprocation P ...
-
Craftsman 315.11401 - page 7
SPECIFICATIONS Motor .................................................................................................................................................................. 19.2 Volt DC Switch .................................................................................................................................................. ...
-
Craftsman 315.11401 - page 8
HANDLE LOCK OFF SWITCH BATTERY PACK SHOWNINTOOL BATTERY PACK TACKING SWITCH SHOWN IN CHARGER MOUTH TRIGGER 4-1/2 in, CHARGER REDLED ON INDICATES GREENLEDON AFTERFAST CHARGING CYCLE, INDICATES FULLYCHARGED BATTERY PACK AND IN TRICKLE CHARGE MODE, YELLOW AND GREENLEDS ON INDICATES DEEPLY DISCHARGED OR DEFECTIVE BATTERY PACK. Fig. 1 CHARGER See Figure ...
-
Craftsman 315.11401 - page 9
INSTRUCTIONS When unpacking the tool: • Carefully remove the tool and accessories from the box. • Make sure that all items listed in the packing list are in- cluded. • Inspect the tool carefully to make sure no breakage or damage occurred during shipping. • Do not discard the packing material until you have care- fully inspected and satisfa ...
-
Craftsman 315.11401 - page 10
_)k WARNING: Do not allow familiarity with this tool to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury. BATTERY PACK The battery pack for your toot has been shipped in a low charge condition to prevent possible problems. Therefore, you should charge it until light on front of charger changes ...
-
Craftsman 315.11401 - page 11
TO INSTALL BATTERY PACK • Place battery pack in your tool. Align raised rib on battery pack with groove inside toot. See Figure 2. • Make sure the latches on each side of your battery pack snap in place and battery pack is secured in toot before beginning operation. BATTERY LATCHES DEPRESS LATCHES TO RELEASE BATTERY PACK • Place staples in ch ...
-
Craftsman 315.11401 - page 12
NAILS / Fig. 5 APPLICATIONS • This Nailer/Stapler is designed for light duty stapling or nailing into wood. TO STAPLE See Figure 6. • Hold handle firmly with tack mouth flat to workpiece forming a 90 ° angle; depress the lock-off button and pull switch trigger to drive staple. LOCK-OFF BUTTON Fig. 6 12 ...
-
Craftsman 315.11401 - page 13
_ WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, ...
-
Craftsman 315.11401 - page 14
...
-
Craftsman 315.11401 - page 15
CRAFTSMAN 19.2 VOLT CORDLESS NAILER/STAPLER - MODEL NO. 315.114010 l The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your 19.2 VOLT CORDLESS NAILER/STAPLER or when ordering repair | parts. __ SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS 2 PARTS LIST Key Part N ...
-
Craftsman 315.11401 - page 16
Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door o ...
¿Tienes una pregunta acerca de Craftsman 315.11401?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Craftsman 315.11401, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Craftsman 315.11401 probablemente compartirá una forma de solucionarlo.