Manuel d’utilisation ADTRAN 1200070L1

187 pages 1.65 mb
Télécharger

Aller à la page of 187

Summary
  • ADTRAN 1200070L1 - page 1

    Express XL and Express XLT ISDN Router/Bridge USER MANUAL Express XL, Data Only 1200070L1 Express XLT with POTS Option 1200070L2 61200.070L1-1B February 1998 ...

  • ADTRAN 1200070L1 - page 2

    Trademark: DMS-100 is a trademark of Northern Telecom, Inc. Ethernet is a trademark of Digital Equipment Corporation, Intel Corporation, and Xe- rox Corporation. ExpertISDN (patent number 5,715,241) is a trademark of ADTRAN, Inc. Macintosh is a registered trademark of Apple Computer, Inc. Novell, NetWare, and Internetwork Packet Exchange (IPX) are ...

  • ADTRAN 1200070L1 - page 3

    FCC regulations require that the following information be provided in this manual: 1. If this equipment causes harm to the telephone network, the telephone company may temporarily discontinue service. If possible, advance notification is given; oth- erwise, notification is given as soon as possible. The telephone company will advise the customer of ...

  • ADTRAN 1200070L1 - page 4

    CANADIAN EMISSIONS REQUIREMENTS This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled "Digital Apparatus," ICES-003 of the Department of Communications. Cet appareil nuerique respecte les limites de bruits radioelectriqu ...

  • ADTRAN 1200070L1 - page 5

    61200.070L1-1 Express XL/XLT User Manual i T able of Contents Quick Startup Guide ........................................................................................................ 1 Setting up the ISDN Line .................................................................................................. 1 Connecting to an Internet Service P ...

  • ADTRAN 1200070L1 - page 6

    Table of Contents ii Express XL/XLT User Manual 61200.070L1-1 Chapter 3. Terminal Menu Operation and Structure ................................................. 27 Terminal Menu Structure .................................................................................................. 27 Configuration .............................................. ...

  • ADTRAN 1200070L1 - page 7

    Table of Contents 61200.070L1-1 Express XL/XLT User Manual iii IP/Static Routes ................................................................................................... 41 Static Routes/Active ..................................................................................... 41 Static Routes/IP Address ................................ ...

  • ADTRAN 1200070L1 - page 8

    Table of Contents iv Express XL/XLT User Manual 61200.070L1-1 Bridge/Spanning Tree......................................................................................... 52 Spanning Tree/Mode ................................................................................... 52 Spanning Tree/Priority .............................................. ...

  • ADTRAN 1200070L1 - page 9

    Table of Contents 61200.070L1-1 Express XL/XLT User Manual v Connection List/IP .............................................................................................. 67 IP/Mode ......................................................................................................... 67 IP/NAT ................................................ ...

  • ADTRAN 1200070L1 - page 10

    Table of Contents vi Express XL/XLT User Manual 61200.070L1-1 Connection List/Bandwidth .............................................................................. 77 Bandwidth/On Demand .............................................................................. 77 Bandwidth/Mode ............................................................... ...

  • ADTRAN 1200070L1 - page 11

    Table of Contents 61200.070L1-1 Express XL/XLT User Manual vii Dial Menu ............................................................................................................................ 88 Dial/Description.......................................................................................................... 88 Dial/Dial ............. ...

  • ADTRAN 1200070L1 - page 12

    Table of Contents viii Express XL/XLT User Manual 61200.070L1-1 Upgrade/TFTP Host ........................................................................................... 104 Upgrade/Filename .............................................................................................. 104 Upgrade/Status.......................................... ...

  • ADTRAN 1200070L1 - page 13

    61200.070L1-1 Express XL/XLT User Manual ix List of Figures Figure 1-1: Express XL/XLT .................................................................................... 7 Figure 1-2: Single User to Corporate LAN ............................................................ 8 Figure 1-3: Single User to Internet Service Provider ................... ...

  • ADTRAN 1200070L1 - page 14

    List of Figures x Express XL/XLT User Manual 61200.070L1-1 ...

  • ADTRAN 1200070L1 - page 15

    61200.070L1-1 Express XL/XLT User Manual xi List of T ables Table 2-A: Using the Flash-Hook ........................................................................... 22 Table 4-A: Troubleshooting Calls ........................................................................... 113 Table D-A: IBM/AT Style EIA-232 Interface ........................ ...

  • ADTRAN 1200070L1 - page 16

    List of Tables xii Express XL/XLT User Manual 61200.070L1-1 ...

  • ADTRAN 1200070L1 - page 17

    61200.070L1-1 Express XL/XLT User Manual 1 Quick Startup Guide SETTING UP THE ISDN LINE Before configuring the Express XL/XLT, ensure that the telephone service has provided the switch type, service profile identification (SPID), and local direc- tory number (LDN). Example: Switch Type National ISDN-1 SPID1 20555512120100 SPID2 20555512130100 LDN1 ...

  • ADTRAN 1200070L1 - page 18

    Quick Startup Guide 2 Express XL/XLT User Manual 61200.070L1-1 CONNECTING TO AN INTERNET SERVICE PROVIDER Internet Access using Network Address Translation (NAT) 1. Connect the 10BaseT cable from the PC’s network card to the Express XL/ XLT. Select TO NIC on the Express XL/XLT back panel. 2. Go to the Configuration/Connection List menu, and then ...

  • ADTRAN 1200070L1 - page 19

    Quick Startup Guide 61200.070L1-1 Express XL/XLT User Manual 3 19. If the call is successful, the Status column will read active . If not, make sure the number(s) are correct or reference Chapter 4 on page 107 (the trou- bleshooting chapter) before going on to the next step. 20. Once the call is up, the PC must generate a DHCP request to obtain the ...

  • ADTRAN 1200070L1 - page 20

    Quick Startup Guide 4 Express XL/XLT User Manual 61200.070L1-1 11. Enter the IP address and Netmask parameters of the access server at the remote site. This creates a static route to the access server’s network which is entered into the Express XL/XLT’s IP route table. 12. Move the cursor over the RIP menu. Check with the network administra- to ...

  • ADTRAN 1200070L1 - page 21

    Quick Startup Guide 61200.070L1-1 Express XL/XLT User Manual 5 When the computer which is attached to the local LAN attempts to access a host on the access server, the Express XL/XLT will dial the number provided in the Connection List profile. The Express XL/XLT will provide one of two B-channels based on traffic demand and POTS port usage (Expres ...

  • ADTRAN 1200070L1 - page 22

    Quick Startup Guide 6 Express XL/XLT User Manual 61200.070L1-1 ...

  • ADTRAN 1200070L1 - page 23

    61200.070L1-1 Express XL/XLT User Manual 7 Chapter 1 Understanding ISDN and the Express XL/XLT ISDN OVERVIEW The Integrated Services Digital Network (ISDN) is a public or private switched digital network. ISDN is an international standard for digital communica- tions, allowing a full range of enhanced services supporting voice, data, and image appl ...

  • ADTRAN 1200070L1 - page 24

    Chapter 1: Understanding ISDN and the Express XL/XLT 8 Express XL/XLT User Manual 61200.070L1-1 Applications Single User to Corporate LAN • Telecommuter/Home Office Access to the corporate LAN • Single device access • User Datagram Protocol (UDP) broadcasts are “relayed” to corporate LAN. • Client device can obtain the Internet Protocol ...

  • ADTRAN 1200070L1 - page 25

    Chapter 1: Understanding ISDN and the Express XL/XLT 61200.070L1-1 Express XL/XLT User Manual 9 Single User IP to Internet Service Provider (ISP) using Network Ad- dress Translation (NAT) • Provides high speed home access to the Internet • NAT provides translation from user assigned IP addresses to ISP assigned IP addresses. • The PC’s IP a ...

  • ADTRAN 1200070L1 - page 26

    Chapter 1: Understanding ISDN and the Express XL/XLT 10 Express XL/XLT User Manual 61200.070L1-1 Multiple Users to Internet Service Provider (ISP) using NAT • Provides high speed home access to the Internet • Multiple and simultaneous access • The PC’s IP address can by dynamically assigned by the Express XL/XLT. • On-demand Internet acce ...

  • ADTRAN 1200070L1 - page 27

    Chapter 1: Understanding ISDN and the Express XL/XLT 61200.070L1-1 Express XL/XLT User Manual 11 Small Office - Home Office (SOHO) to Corporate LAN • Connects the small office or home office to the corporate LAN • Routes IP and Internet Packet Exchange (IPX) traffic from multiple devices to the corporate LAN • Bridges all non-routed traffic ( ...

  • ADTRAN 1200070L1 - page 28

    Chapter 1: Understanding ISDN and the Express XL/XLT 12 Express XL/XLT User Manual 61200.070L1-1 2. IP Router: The Express XL/XLT can function as an IP router using the Routing Information Protocol (RIP) for advertising and learning routes among other routers. Static routes may also be entered into the routing ta- ble. 3. IPX Router: IPX routers an ...

  • ADTRAN 1200070L1 - page 29

    Chapter 1: Understanding ISDN and the Express XL/XLT 61200.070L1-1 Express XL/XLT User Manual 13 Bridging In Bridge Mode, the Express XL/XLT can communicate with two remote net- works at a time. The destination is dialed by setting up a Connection List pro- file and choosing Dial on the Dial menu. See Configuration/Connection List on page 63 for in ...

  • ADTRAN 1200070L1 - page 30

    Chapter 1: Understanding ISDN and the Express XL/XLT 14 Express XL/XLT User Manual 61200.070L1-1 IP Routing The Express XL/XLT operates as a dial-up IP router when the Configuration/ IP/IP Router/Mode option is configured to On . The Express XL/XLT uses an IP unnumbered WAN interface; the IP address and mask assigned to the unit’s LAN interface a ...

  • ADTRAN 1200070L1 - page 31

    Chapter 1: Understanding ISDN and the Express XL/XLT 61200.070L1-1 Express XL/XLT User Manual 15 IPX Routing Like IP routing, the Express XL/XLT can connect to two different sites and ex- change IPX packets. Network routes and services are learned and advertised using Novell’s RIP and SAP. Routes and services learned from a separate site can be r ...

  • ADTRAN 1200070L1 - page 32

    Chapter 1: Understanding ISDN and the Express XL/XLT 16 Express XL/XLT User Manual 61200.070L1-1 Network Address Translation Mode NAT is a special mode of operation in which the Express XL/XLT obtains a dynamically assigned IP address from the peer router (typically an Internet Service Provider). This allows a network of computers to benefit from E ...

  • ADTRAN 1200070L1 - page 33

    Chapter 1: Understanding ISDN and the Express XL/XLT 61200.070L1-1 Express XL/XLT User Manual 17 WAN Indicators LNK Flashes when the link is being negotiated; solid when the link is active. B1 Flashes when a call on the B1 channel is in progress; solid when a call is connected. B2 Flashes when a call on the B2 channel is in progress; solid when a c ...

  • ADTRAN 1200070L1 - page 34

    Chapter 1: Understanding ISDN and the Express XL/XLT 18 Express XL/XLT User Manual 61200.070L1-1 ISDN Connection From the network, ISDN is delivered by a single 2-wire 2B1Q U-interface which is connected directly to the Express XL/XLT. ISDN network termina- tion is designed into the Express XL/XLT, eliminating the need and expense of a separate NT1 ...

  • ADTRAN 1200070L1 - page 35

    Chapter 1: Understanding ISDN and the Express XL/XLT 61200.070L1-1 Express XL/XLT User Manual 19 Ordering ISDN When ordering ISDN from the telephone company, request EZ-ISDN 1 (Ca- pability Package U) to ensure it is set up properly. EZ-ISDN 1 is recommend- ed by the industry for most home office/small business applications. If this is not availabl ...

  • ADTRAN 1200070L1 - page 36

    Chapter 1: Understanding ISDN and the Express XL/XLT 20 Express XL/XLT User Manual 61200.070L1-1 be assigned under the Configuration/IP/NAT menu that allows incoming HT- TP, FTP, and mail server requests from the Internet to be translated and for- warded to this address on the user network. Configuration The Express XL/XLT is configured using a men ...

  • ADTRAN 1200070L1 - page 37

    61200.070L1-1 Express XL/XLT User Manual 21 Chapter 2 Installation After unpacking the unit, immediately inspect it for possible shipping dam- age. If damage is discovered, file a claim immediately with the shipping car- rier; then contact the ADTRAN Repair and Return department. ISDN NETWORK CONNECTION The Express XL/XLT supports either dial or le ...

  • ADTRAN 1200070L1 - page 38

    Chapter 2: Installation 22 Express XL/XLT User Manual 61200.070L1-1 TELEPHONE CONNECTION (XLT ONLY) Basic Telephone Service The Express XLT supports an analog DTMF telephone type (AT&T 2500) with the POTS interface, part number 1200070L2. The telephone or other analog de- vice (like a fax machine or modem) plugs into an RJ-11 jack labeled PHONE ...

  • ADTRAN 1200070L1 - page 39

    Chapter 2: Installation 61200.070L1-1 Express XL/XLT User Manual 23 Table 2-A Using the Flash-Hook Calling a second party with an active call. Flash-hook to place active call on hold and dial new number. Hanging up will terminate the call. Answering an incoming call with an active call at call waiting. Flash-hook to place active call on hold and an ...

  • ADTRAN 1200070L1 - page 40

    Chapter 2: Installation 24 Express XL/XLT User Manual 61200.070L1-1 Figure 2-1 Wiring Scheme 1: Use existing analog telephone equipment, but replace single analog telephone service with ISDN service To Telephone Company Yellow Red Green Black To Telephone Company Yellow Red Green Black Express XLT 10-Base-T Phone U Personal Computer New Wiring Sche ...

  • ADTRAN 1200070L1 - page 41

    Chapter 2: Installation 61200.070L1-1 Express XL/XLT User Manual 25 Figure 2-2 Wiring Scheme 2: Retain single analog telephone service and add ISDN service To Telephone Company Yellow Red Green Black To Telephone Company Yellow Red Green Black Express XLT 10-Base-T Phone U Personal Computer New Wiring Scheme Red Green Ensure other yellow and black ...

  • ADTRAN 1200070L1 - page 42

    Chapter 2: Installation 26 Express XL/XLT User Manual 61200.070L1-1 ...

  • ADTRAN 1200070L1 - page 43

    61200.070L1-1 Express XL/XLT User Manual 27 Chapter 3 Terminal Menu Operation and Structure TERMINAL MENU STRUCTURE The Express XL/XLT uses a multilevel menu structure containing both menu items and data fields. All menu operations and data display in the terminal menu window. The Express XL/XLT is shipped in the Factory Default config- uration. Co ...

  • ADTRAN 1200070L1 - page 44

    Chapter 3: Terminal Menu Operation and Structure 28 Express XL/XLT User Manual 61200.070L1-1 Figure 3-1 Top Level Terminal Menu Menu Path Describes the current position in the terminal menu structur e. Right Pane Lists available submenus. Additional submenus available through this pane are indicated by the [+] and [DA T A] symbols. Left Pane Lists ...

  • ADTRAN 1200070L1 - page 45

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 29 Status The Status menu provides options to review and monitor the status of the Ex- press XL/XLT system. See the section Status Menu on page 90 for detailed in- formation on the available options. Test The Test menu can be used for performing diagnostic tes ...

  • ADTRAN 1200070L1 - page 46

    Chapter 3: Terminal Menu Operation and Structure 30 Express XL/XLT User Manual 61200.070L1-1 NAVIGATING THE TERMINAL MENUS The following sections provide information on how to navigate through the terminal menus. General Layout When you first start a terminal mode session, the window shown in Figure 3- 1 on page 28 displays. The screen is divided i ...

  • ADTRAN 1200070L1 - page 47

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 31 Navigation with the Keyboard You can use different keystrokes to navigate through the terminal menu. Press Control-Z to activate a pop-up screen with the available keystrokes. The fol- lowing section provides a list of the available keystrokes and the resul ...

  • ADTRAN 1200070L1 - page 48

    Chapter 3: Terminal Menu Operation and Structure 32 Express XL/XLT User Manual 61200.070L1-1 ConÞguration F Restores factory default settings. This setting r estores the factory defaults based on the location of the cursor . Entire submenus can be factory defaulted. C Copies selected items to the clipboard. The amount of information you can copy d ...

  • ADTRAN 1200070L1 - page 49

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 33 Security Levels Each menu item on the configuration screens has an associated security level. The security level ranges from 0 (highest security level) to 5 (lowest security level). This level determines whether a Telnet session can access that menu item. T ...

  • ADTRAN 1200070L1 - page 50

    Chapter 3: Terminal Menu Operation and Structure 34 Express XL/XLT User Manual 61200.070L1-1 CONFIGURATION MENU Configuration/System Info The System Info menu provides basic information about the unit and displays data fields for editing information. Figure 3-2 displays the submenus avail- able under this menu item. Figure 3-2 Configuration/System ...

  • ADTRAN 1200070L1 - page 51

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 35 up to 31 alpha-numeric characters in this field, including spaces and special characters (such as an under bar). System Contact Write security: 3; Read security: 5 Provides a user configurable text string for the contact name. This field can contain a name, ...

  • ADTRAN 1200070L1 - page 52

    Chapter 3: Terminal Menu Operation and Structure 36 Express XL/XLT User Manual 61200.070L1-1 Configuration/WAN The WAN menu is used to set up the ISDN parameters for the Express XL/ XLT. Also, for the Express XLT, a POTS menu is provided. Figure 3-3 shows the WAN menu. Figure 3-3 Configuration/WAN Screen WAN/ISDN Write security: 2; Read security: 5 ...

  • ADTRAN 1200070L1 - page 53

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 37 Dial Line/Switch Protocol Write security: 2; Read security: 5 Find out what kind of ISDN switch protocol the local CO is using by asking the local telephone administrator or the telephone company representative. The Express XL/XLT can be configured for the ...

  • ADTRAN 1200070L1 - page 54

    Chapter 3: Terminal Menu Operation and Structure 38 Express XL/XLT User Manual 61200.070L1-1 Dial Line/LDN 1 or 2 Write security: 2; Read security: 5 This option allows the entry of 0, 1, or 2 LDNs. The LDN is used when placing or receiving calls. The LDN is the local phone number assigned to the line. LDN 1 = 5 5 5 1 2 1 2 LDN 2 = 5 5 5 1 2 1 3 Di ...

  • ADTRAN 1200070L1 - page 55

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 39 ISDN/FEBEs Read security: 5 This contains the number of Far-End-Block-Errors (FEBEs) that have been de- tected by the ISDN circuitry on the other end of the link. Continuous errors can indicate a line problem, but a burst at one time is normal. WAN/POTS Wri ...

  • ADTRAN 1200070L1 - page 56

    Chapter 3: Terminal Menu Operation and Structure 40 Express XL/XLT User Manual 61200.070L1-1 Configuration/IP The IP menu is used to set up the IP parameters for the Express XL/XLT. Any general IP-related configuration item is under this menu. Figure 3-4 shows the IP menu. Figure 3-4 Configuration/IP Screen IP/IP Address Write security: 2; Read sec ...

  • ADTRAN 1200070L1 - page 57

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 41 IP/Default Gateway Write security: 3; Read security: 5 The default gateway is used by the Express XL/XLT for sending IP packets whose destination address is not found in the route table. If this address is all zeros, then the first WAN connection becomes th ...

  • ADTRAN 1200070L1 - page 58

    Chapter 3: Terminal Menu Operation and Structure 42 Express XL/XLT User Manual 61200.070L1-1 Static Routes/Private Write security: 4; Read security: 5 When set to No , the Express XL/XLT will advertise this static route using RIP. Otherwise, setting to Yes means that the route is kept private. IP/IP Router The IP router is configured under this men ...

  • ADTRAN 1200070L1 - page 59

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 43 RIP/Method Write security: 3; Read security: 5 Split Horizon - Only routes not learned on the Ethernet port are advertised. Poison Reverse (def) - All routes are advertised, including routes learned from the Ethernet port. These routes are poisoned. None - ...

  • ADTRAN 1200070L1 - page 60

    Chapter 3: Terminal Menu Operation and Structure 44 Express XL/XLT User Manual 61200.070L1-1 NAT/DHCP Renewal Time Write security: 3; Read security: 5 This is the number of hours that the DHCP server should allow the device be- fore it is required to send a new DHCP request. The default is 15 hours, and 0 represents an infinite lease. NAT/Web Serve ...

  • ADTRAN 1200070L1 - page 61

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 45 IP/UDP Relay The Express XL/XLT can be configured as a relay agent for UDP broadcast packets. Normally, a router will not forward UDP broadcast packets. How- ever, many network application use UDP broadcasts to configure addresses, host names, and other inf ...

  • ADTRAN 1200070L1 - page 62

    Chapter 3: Terminal Menu Operation and Structure 46 Express XL/XLT User Manual 61200.070L1-1 IP/Proxy ARP Write security: 4; Read security: 5 This feature allows the network portion of a group of addresses to be shared between several physical network segments. The ARP protocol itself provides a way for devices to create a mapping between physical ...

  • ADTRAN 1200070L1 - page 63

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 47 Configuration/IPX The IPX menu is used to set up the IPX parameters for the Express XL/XLT. Any general IPX-related configuration item can be found under this menu. Figure 3-5 shows the IPX menu. Figure 3-5 Configuration/IPX Screen IPX/Mode Write security: ...

  • ADTRAN 1200070L1 - page 64

    Chapter 3: Terminal Menu Operation and Structure 48 Express XL/XLT User Manual 61200.070L1-1 IPX/Frame Type Write security: 2; Read security: 5 The Express XL/XLT supports all four defined IPX frame types. The possible frame types are: Ether Type II (def), Ether 802.3 (Raw) , Ether 802.2 , or Ether SNAP (802.2 SNAP). Only one frame type can be used ...

  • ADTRAN 1200070L1 - page 65

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 49 IPX/SAP Timer Write security: 3; Read security: 5 This value specifies how often the Express XL/XLT sends out IPX SAP (Ser- vice Access Protocol) packets on the network segment attached to the Ethernet port. The SAP packets sent contain information about th ...

  • ADTRAN 1200070L1 - page 66

    Chapter 3: Terminal Menu Operation and Structure 50 Express XL/XLT User Manual 61200.070L1-1 Configuration/Bridge The Bridge menu is used to set up the bridge parameters for the Express XL/ XLT. The bridging function runs at the Media Access Control (MAC) level which allows any protocol packets that run over Ethernet to be forwarded. Bridging can r ...

  • ADTRAN 1200070L1 - page 67

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 51 negotiate PPP IPCP to exchange IP packets. However, if a device can only sup- port PPP BCP, IP packets are encapsulated by the device as bridge packets. The Express XL/XLT can treat the WAN IP Bridge as a virtual Ethernet port connected only to a WAN device ...

  • ADTRAN 1200070L1 - page 68

    Chapter 3: Terminal Menu Operation and Structure 52 Express XL/XLT User Manual 61200.070L1-1 WAN IPX Bridge/Network Write security: 2; Read security: 5 This is the network address of the virtual Ethernet port. See IPX/Network on page 47 for explanation of the IPX network number. WAN IPX Bridge/Frame Type Write security: 2; Read security: 5 This is ...

  • ADTRAN 1200070L1 - page 69

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 53 Spanning Tree/Priority Write security: 2; Read security: 5 This assigns a priority to the Express XL/XLT that permits the relative priority of multiple bridges to be managed. The range is 0 to 65535 with a default of 32768. Spanning Tree/Maximum Age Write s ...

  • ADTRAN 1200070L1 - page 70

    Chapter 3: Terminal Menu Operation and Structure 54 Express XL/XLT User Manual 61200.070L1-1 LAN Port/Path Cost Write security: 2; Read security: 5 This is the cost of using the Ethernet port in the total cost of the path. The range is from 1 to 65535 with a default of 100 (for 10 Mbits/second). LAN Port/Priority Write security: 2; Read security: 5 ...

  • ADTRAN 1200070L1 - page 71

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 55 WAN Port 1/Active Write security: 2; Read security: 5 This setup is exactly like WAN Port 0 above. WAN Port 1/Path Cost Write security: 2; Read security: 5 This setup is exactly like WAN Port 0 above. WAN Port 1/Priority Write security: 2; Read security: 5 ...

  • ADTRAN 1200070L1 - page 72

    Chapter 3: Terminal Menu Operation and Structure 56 Express XL/XLT User Manual 61200.070L1-1 Configuration/Security The Security menu is used to set up the authentication parameters needed to authenticate PPP connection over the ISDN B-channels. Also, the filter defines are placed under this menu. Figure 3-7 shows the Security menu. Figure 3-7 Conf ...

  • ADTRAN 1200070L1 - page 73

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 57 Security/When Write security: 1; Read security: 2 The Express XL/XLT can be configured to authenticate the PPP peer (using the above method) for incoming calls using Answer Only (def), or for outgo- ing and incoming calls using Originate and Answer . Securi ...

  • ADTRAN 1200070L1 - page 74

    Chapter 3: Terminal Menu Operation and Structure 58 Express XL/XLT User Manual 61200.070L1-1 Radius Server/Retry Count Write security: 1; Read security: 2 This is the number of times the Express XL/XLT should send a request packet to the RADIUS server without a response before giving up. If the number of attempts to communicate with the primary ser ...

  • ADTRAN 1200070L1 - page 75

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 59 Security/Filter Defines The Express XL/XLT can filter packets based on certain parameters within the packet. The method used by the Express XL/XLT allows the highest flexibility for defining filters and assigning them to a Connection List profile. The filte ...

  • ADTRAN 1200070L1 - page 76

    Chapter 3: Terminal Menu Operation and Structure 60 Express XL/XLT User Manual 61200.070L1-1 Filter Defines /Pattern Filter Defines Write security: 2; Read security: 3 The pattern filter is applied to bridge packets only. That is any packet which is forwarded by the bridge functionality of the Express XL/XLT. Up to 32 pat- tern defines can be speci ...

  • ADTRAN 1200070L1 - page 77

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 61 Dst Port Cmpr Type of comparison that is performed = - means ports equal to not = - means port not equal to > - means port greater than < - means port less than None - means the destination port is not compared Proto Protocol used for comparison. Rang ...

  • ADTRAN 1200070L1 - page 78

    Chapter 3: Terminal Menu Operation and Structure 62 Express XL/XLT User Manual 61200.070L1-1 Dest Socket Comp Type of comparison that is performed: = - means socket equal to Not = - means socket not equal to > - means socket greater than < - means socket less than None - no comparison is done on destination socket Type 8-bit value which is th ...

  • ADTRAN 1200070L1 - page 79

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 63 Configuration/Connection List The Express XL/XLT uses the Connection List to specify the profile each user or group of users are to have when connected. Each profile or item in the Con- nection List has many configurable parameters giving high flexibility o ...

  • ADTRAN 1200070L1 - page 80

    Chapter 3: Terminal Menu Operation and Structure 64 Express XL/XLT User Manual 61200.070L1-1 Connection List/Description Write security: 3; Read security: 4 The description is a text string that identifies the profile. Connection List/Active Write security: 3; Read security: 4 When set to Yes (def), this profile is used for authentication and user ...

  • ADTRAN 1200070L1 - page 81

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 65 • When originating an outgoing call: - Express XL/XLT uses PPP method configured in Configuration/Security/PPP . - Authenticatee’s username is compared to profile used to dial. • Authenticating with RADIUS: - When Configuration/Security/Authentication ...

  • ADTRAN 1200070L1 - page 82

    Chapter 3: Terminal Menu Operation and Structure 66 Express XL/XLT User Manual 61200.070L1-1 PAP, CHAP or EAP - The connection can be authenticated using PAP, CHAP or EAP. CHAP or EAP - The connection can be authenticated using CHAP or EAP only. EAP - The connection will only allow authentication by the peer using EAP. Authentication/Tx Username Wr ...

  • ADTRAN 1200070L1 - page 83

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 67 Authentication/Call ID 1 Write security: 1; Read security: 3 The caller identification from the ISDN incoming call is compared to this num- ber, starting from the right digits. Authentication/Call ID 2 Write security: 1; Read security: 3 The caller identifi ...

  • ADTRAN 1200070L1 - page 84

    Chapter 3: Terminal Menu Operation and Structure 68 Express XL/XLT User Manual 61200.070L1-1 Route/IP/Net Write security: 3; Read security: 5 The PPP peer’s IP address or network can be set here, if known. Leaving this at 0.0.0.0 means that the Express XL/XLT will determine the PPP peer’s IP and network using the PPP IPCP. Route/Netmask Write s ...

  • ADTRAN 1200070L1 - page 85

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 69 IP/RIP The RIP parameters can be adjusted from their defaults under this menu. The RIP parameters for all WAN connections are set on a per-session basis. RIP/Mode Write security: 3; Read security: 5 The Express XL/XLT will perform RIP over the WAN connectio ...

  • ADTRAN 1200070L1 - page 86

    Chapter 3: Terminal Menu Operation and Structure 70 Express XL/XLT User Manual 61200.070L1-1 RIP/Retain Write security: 3; Read security: 5 When this Connection List entry is disconnected and this parameter is set to Yes , all routes learned from this WAN connection are retained and their rout- ing interface is set to idle. This permits dial-on-dem ...

  • ADTRAN 1200070L1 - page 87

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 71 IPX/Retain Write security: 3; Read security: 5 When this Connection List entry is disconnected and this parameter is set to Yes , all routes learned from this WAN connection are retained and their rout- ing interface is set to idle. This permits dial-on-dem ...

  • ADTRAN 1200070L1 - page 88

    Chapter 3: Terminal Menu Operation and Structure 72 Express XL/XLT User Manual 61200.070L1-1 Connection List/Bridge The Bridge menu contains the parameters needed for exchanging bridged packets with the PPP peer. Bridge/Mode Write security: 3; Read security: 5 When set to On (def), the Express XL/XLT will attempt to negotiate PPP BCP with the PPP p ...

  • ADTRAN 1200070L1 - page 89

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 73 Probe/Update Window Write security: 3; Read security: 5 This is the time the Express XL/XLT stays connected during a probe. Normal- ly route and service tables are exchanged immediately after connection. How- ever, some routers could wait until their regula ...

  • ADTRAN 1200070L1 - page 90

    Chapter 3: Terminal Menu Operation and Structure 74 Express XL/XLT User Manual 61200.070L1-1 phone numbers to be exchanged when more bandwidth is needed and mem- ber links to be dropped when bandwidth is to be decreased. When this item is set to On , BACP is negotiated with the PPP peer. When Off , the Express XL/XLT will not run BACP/BAP but dynam ...

  • ADTRAN 1200070L1 - page 91

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 75 PPP/Max Failure Write security: 3; Read security: 5 Due to the nature of PPP, configuration options may not be agreed upon be- tween two PPP peers. This value is the number of configuration-naks that should occur before an option is configuration-rejected. ...

  • ADTRAN 1200070L1 - page 92

    Chapter 3: Terminal Menu Operation and Structure 76 Express XL/XLT User Manual 61200.070L1-1 calls. The audio option is used with an ISDN line configured for voice service. In some areas, audio service costs less than data services. An audio call type does guarantee a digital end-to-end digital connection. 56K - 56K directs the call control softwar ...

  • ADTRAN 1200070L1 - page 93

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 77 Dial Out/Initial Channels Write security: 3; Read security: 5 This is the number of B-channels to dial-up on the initial connection. Possible choices are 1 (def) and 2. Connection List/Bandwidth The bandwidth parameters that govern this connection are set h ...

  • ADTRAN 1200070L1 - page 94

    Chapter 3: Terminal Menu Operation and Structure 78 Express XL/XLT User Manual 61200.070L1-1 Bandwidth/Upper Threshold Write security: 3; Read security: 5 This is the percentage of bandwidth that must be at least present on one B- channel before a second B-channel is added. The range is 0 to 100 and is in per- centages. The default is 80%, which is ...

  • ADTRAN 1200070L1 - page 95

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 79 Samples/Time Between Changes Write security: 3; Read security: 5 This value is the minimum time between bandwidth changes for this Connec- tion List profile. The range is 0 to 255 seconds. The default is 60 seconds. Connection List/Filters The Express XL/XL ...

  • ADTRAN 1200070L1 - page 96

    Chapter 3: Terminal Menu Operation and Structure 80 Express XL/XLT User Manual 61200.070L1-1 Filters/In Exceptions Write security: 2; Read security: 5 This is a list of up to 32 filter entries which can be combined using the opera- tions field. The operations are performed in the order they appear on the list. Active - Turns this entry active when ...

  • ADTRAN 1200070L1 - page 97

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 81 Filters/Out Exceptions Write security: 2; Read security: 5 This is a list of up to 32 filter entries. The setup is exactly the same as the Filter/ In Exceptions list. Filters/Demand Dial Write security: 2; Read security: 5 The demand dial filters have two p ...

  • ADTRAN 1200070L1 - page 98

    Chapter 3: Terminal Menu Operation and Structure 82 Express XL/XLT User Manual 61200.070L1-1 Filters/Dem Dial Exceptions Write security: 2; Read security: 5 This is a list of up to 32 filter entries. The setup is exactly the same as the Filter/ In Exceptions list. ...

  • ADTRAN 1200070L1 - page 99

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 83 Configuration/Management The Express XL/XLT can be managed using Telnet, Simple Network Manage- ment Protocol (SNMP), or the maintenance port. SNMP support is limited to MIB definitions. See Appendix C on page 139 for a description of the MIBs sup- ported b ...

  • ADTRAN 1200070L1 - page 100

    Chapter 3: Terminal Menu Operation and Structure 84 Express XL/XLT User Manual 61200.070L1-1 Telnet/User List Up to four users can be configured for access to the Express XL/XLT. Each user can be assigned a privilege and time out. User List/Name Write security: 1; Read security: 3 A text string of the user name for this session. User List/Authen Me ...

  • ADTRAN 1200070L1 - page 101

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 85 Management/SNMP The Express XL/XLT is an SNMP agent. It can respond to Get-Requests and generate traps. These two lists set up the manager, communities, and levels. See Appendix C on page 139 for more information on SNMP. SNMP Access Write security: 3; Read ...

  • ADTRAN 1200070L1 - page 102

    Chapter 3: Terminal Menu Operation and Structure 86 Express XL/XLT User Manual 61200.070L1-1 Traps/Manager Name Write security: 2; Read security: 4 This is the text string describing the name of the entry. It is intended for easy reference and has no bearing on the SNMP trap function. Traps/Manager IP Write security: 2; Read security: 4 This is the ...

  • ADTRAN 1200070L1 - page 103

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 87 Maint Port/Parity Write security: 5; Read security: 5 This is the asynchronous parity that the maintenance port will run. The possi- ble values are None (def), Odd, or Even . Maint Port/Stop Bits Write security:5; Read security:5 This is the stop bit used f ...

  • ADTRAN 1200070L1 - page 104

    Chapter 3: Terminal Menu Operation and Structure 88 Express XL/XLT User Manual 61200.070L1-1 DIAL MENU The Dial menu is used for dialing the Connection List profile setup under Con- figuration/Connection List and for checking the status of each Connection List. This list is in the same order as the Connection List entries. Figure 3-10 shows the Dia ...

  • ADTRAN 1200070L1 - page 105

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 89 Dial/Hang Up Write security: 4; Read security: 5 This is an activator used for hanging up a Connection List entry. It also re- moves retained routes from the IP and IPX routing tables when the call is not connected. Place the cursor over the field and press ...

  • ADTRAN 1200070L1 - page 106

    Chapter 3: Terminal Menu Operation and Structure 90 Express XL/XLT User Manual 61200.070L1-1 STATUS MENU The Express XL/XLT’s Status menu contains comprehensive status and diag- nostic information used in verifying configuration and identifying problems. The menus are divided into protocol types and sessions. Figure 3-11 shows the Status menu. Fi ...

  • ADTRAN 1200070L1 - page 107

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 91 Call Sessions/Session1 and Call Sessions/Session2 Read security: 5 The Express XL/XLT can support up to two active connections at one time. These two menus reflect the results of PPP negotiations, user name, time con- nected, idle timer, and data rates for ...

  • ADTRAN 1200070L1 - page 108

    Chapter 3: Terminal Menu Operation and Structure 92 Express XL/XLT User Manual 61200.070L1-1 Tx Link Rate - Current actual data transmission rate Rx Link Rate - Current actual data reception rate Tx Comp Ratio - Current transmission compression ratio Rx Comp Ratio - Current reception compression ratio Call Sessions/Spanning Tree Read security: 5 Wh ...

  • ADTRAN 1200070L1 - page 109

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 93 Status/Bridge Table Read security: 5 This lists the contents of the Express XL/XLT’s bridge table. Bridge Cache/MAC Address - Ethernet address for device learned Bridge Cache/Port - Port device learned from: LAN, WAN0, or WAN1 Bridge Cache/TTL - Seconds u ...

  • ADTRAN 1200070L1 - page 110

    Chapter 3: Terminal Menu Operation and Structure 94 Express XL/XLT User Manual 61200.070L1-1 IP Routes/Hops - Number of routers that must go through to get to destination. Ranges from 0-15 or 16 for infinite (can’t get there from here). IP Routes/TTL - Seconds until address is removed from table or “zombied.” Value of 999 means route is stati ...

  • ADTRAN 1200070L1 - page 111

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 95 Status/IPX Servers Read security: 5 This lists the contents of the Express XL/XLT’s IPX server table. IPX Servers/Type - The server type IPX Servers/Name - The server name IPX Servers/Network - The server network address IPX Servers /Address - The servers ...

  • ADTRAN 1200070L1 - page 112

    Chapter 3: Terminal Menu Operation and Structure 96 Express XL/XLT User Manual 61200.070L1-1 Status/LAN Stats Read security: 5 This menu contains statistics for the Ethernet port. Tx Packets - Packets transmitted out the Ethernet port Rx Packets - Packets received from the Ethernet port Tx Errors - Total transmit errors encountered on Ethernet port ...

  • ADTRAN 1200070L1 - page 113

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 97 ICMP redirected messages ICMP packet errors ICMP timeouts received ICMP messages sent ICMP messages received ICMP specif if errors IP datagrams reassembled IP datagrams sent IP datagrams received Total forwarded datagrams IP reassembly timeout Discarded rou ...

  • ADTRAN 1200070L1 - page 114

    Chapter 3: Terminal Menu Operation and Structure 98 Express XL/XLT User Manual 61200.070L1-1 TEST MENU The Express XL/XLT’s Test menu contains built in tests that can be used to di- agnose problems. Figure 3-12 shows the Test menu screen. Figure 3-12 Test Screen The following tests can be run: Test Menu/Echo Request Write security: 4, Read securi ...

  • ADTRAN 1200070L1 - page 115

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 99 LOGS MENU The Logs menu contain logs displaying important information about the run- ning condition of the Express XL/XLT. The logs can be set to capture diagnos- tics of error conditions only by way of a log level. The levels are divided up as follows: lev ...

  • ADTRAN 1200070L1 - page 116

    Chapter 3: Terminal Menu Operation and Structure 100 Express XL/XLT User Manual 61200.070L1-1 PPP Log/Active When set to Yes (def), PPP events below or equal the log level are logged into the log. PPP Log/Wrap When set to Yes (def), new PPP events will overwrite old PPP events when the log is full. All logging will stop when the log is full and set ...

  • ADTRAN 1200070L1 - page 117

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 101 Call Log/Wrap When set to Yes (def), new Call events will overwrite old Call events when the log is full. All logging will stop when the log is full and set to No . Call Log/Level In order to log events, they must be at or below this level. Range is 0 to 6 ...

  • ADTRAN 1200070L1 - page 118

    Chapter 3: Terminal Menu Operation and Structure 102 Express XL/XLT User Manual 61200.070L1-1 Network Log/Level In order to log events, they must be at or below this level. Range is 0 to 6. The default is 3. Network Log/View This menu displays the log list. The fields are as follows: Date/Time - Date and time event occurred. Level - Level associate ...

  • ADTRAN 1200070L1 - page 119

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 103 UTILITIES MENU The Express XL/XLT has utilities embedded i n i t t o help in managing and testing the network and to facilitate software upgrades. Figure 3-14 shows the Utilities menu. Figure 3-14 Utilities Screen Utilities/Ping Write security: 4; Read sec ...

  • ADTRAN 1200070L1 - page 120

    Chapter 3: Terminal Menu Operation and Structure 104 Express XL/XLT User Manual 61200.070L1-1 Utilities/Telnet Client Write security: 4; Read security: 5 The Telnet menu can be used to activate the telnet client function in the Ex- press XL/XLT. Host - IP address or domain name (if DNS is configured) of telnet server. Activate - Starts telnet clien ...

  • ADTRAN 1200070L1 - page 121

    Chapter 3: Terminal Menu Operation and Structure 61200.070L1-1 Express XL/XLT User Manual 105 Upgrade/Start Transfer This activator is used when the configurable items in this menu are complete. Once started, the Express XL/XLT will prompt for erasing the flash. When the flash is erased and the upgrade transfer fails, do not turn off the unit. Retr ...

  • ADTRAN 1200070L1 - page 122

    Chapter 3: Terminal Menu Operation and Structure 106 Express XL/XLT User Manual 61200.070L1-1 ...

  • ADTRAN 1200070L1 - page 123

    61200.070L1-1 Express XL/XLT User Manual 107 Chapter 4 Troubleshooting When the Express XL/XLT powers up, it performs an internal self-test. This takes about 10 seconds. At the end of the test, the PWR LED should remain on. IF SELF-TEST FAILS If the PWR LED is not on or continuously flashes, the following steps will ver- ify whether or not the prob ...

  • ADTRAN 1200070L1 - page 124

    Chapter 4: Troubleshooting 108 Express XL/XLT User Manual 61200.070L1-1 2. Disconnect the Express XL/XLT. From a functioning voice phone, call the local directory number(s) provided with your line. Calling a good ISDN line with nothing connected usually results in a ring or fast busy tone. If someone answers, or you get a not-in-service intercept, ...

  • ADTRAN 1200070L1 - page 125

    Chapter 4: Troubleshooting 61200.070L1-1 Express XL/XLT User Manual 109 G. With a minimum of extra wiring, try connecting to the line pair at the point where the service provider’s wiring ends. H. With the Express XL/XLT connected to the line and pow- ered up, talk to your service provider’s repair group and inform them that your ISDN basic rat ...

  • ADTRAN 1200070L1 - page 126

    Chapter 4: Troubleshooting 110 Express XL/XLT User Manual 61200.070L1-1 5. If the Loop Status in the Express XL/XLT Status menu continuously reads Register SPID #1 , then the Express XL/XLT is physically connected to your local telephone service provider and has established logical layer 2. The Express XL/XLT is unable to establish layer 3. The pro ...

  • ADTRAN 1200070L1 - page 127

    Chapter 4: Troubleshooting 61200.070L1-1 Express XL/XLT User Manual 111 6. If the Loop Status in the Express XL/XLT Status menu continuously reads Getting TEI #2 , the Express XL/XLT has completely initialized the first phone number but is unable to establish logical layer 2 for the second phone number. The problem is in one or both of the followin ...

  • ADTRAN 1200070L1 - page 128

    Chapter 4: Troubleshooting 112 Express XL/XLT User Manual 61200.070L1-1 To isolate the problem, perform the following procedure: A. Ensure the line is multipoint with two phone numbers. B. Ensure that the Express XL/XLT is set up with the correct SPID and LDN. For example: SPID1 = 20572270460101 SPID2 = 20572270470101 LDN 1 = 7227046 LDN 2 = 722704 ...

  • ADTRAN 1200070L1 - page 129

    Chapter 4: Troubleshooting 61200.070L1-1 Express XL/XLT User Manual 113 IF YOU ARE UNABLE TO CONNECT CALLS See Table 4-A for corrective actions if you cannot connect calls. Table 4-A Troubleshooting Calls Condition Corrective Action The Loop LED remains on, but calls cannot be placed. Most likely a problem exists in the software setup (translation) ...

  • ADTRAN 1200070L1 - page 130

    Chapter 4: Troubleshooting 114 Express XL/XLT User Manual 61200.070L1-1 ...

  • ADTRAN 1200070L1 - page 131

    61200.070L1-1 Express XL/XLT User Manual 115 Chapter 5 Specifications SPECIFICATIONS AND FEATURES This section describes the standard specifications and features incorporated in the Express XL/XLT. Network Interface RJ-45 for ISDN Basic Rate U-Interface or RJ-45 for leased 2B1Q service. Ethernet Interface (LAN) Ethernet/IEEE 802.3 10BaseT. Switch C ...

  • ADTRAN 1200070L1 - page 132

    Chapter 5: Specifications 116 Express XL/XLT User Manual 61200.070L1-1 • Supports 2 phones (27 mA loop current each) at 600 ft, 24 AWG • Supports 5 phones (12 mA loop current each) at 300 ft, 24 AWG • Supports 4 phones (15 mA loop current each) at 300 ft, 24 AWG • Supports 3 phones (19 mA loop current each) at 300 ft, 24 AWG • Supports 2 ...

  • ADTRAN 1200070L1 - page 133

    61200.070L1-1 Express XL/XLT User Manual 117 Appendix A Loop Status Messages The Express XL/XLT displays current loop status of the ISDN on the bottom center line of the terminal screen. The following messages are defined: AT&T-5ESS Ready The ISDN link layers 1 through 3 are up against an AT&T 5E switch and is ready for calls. AutoSpid Down ...

  • ADTRAN 1200070L1 - page 134

    Appendix A: Loop Status Messages 118 Express XL/XLT User Manual 61200.070L1-1 DISCONNECTING A call is in the process of being disconnected. DMS-100 Ready The ISDN link layers 1 through 3 are up against a Nortel DMS-100 switch and is ready for calls. Echo: Tx: X Rx: Y The current transmit and receive count for the PPP echo request test. Getting TEI ...

  • ADTRAN 1200070L1 - page 135

    Appendix A: Loop Status Messages 61200.070L1-1 Express XL/XLT User Manual 119 Register SPID #1 The Express XL/XLT’s ISDN layer 1 and 2 is up and is now registering SPID 2 with the ISDN network. RINGING An incoming call is ringing. B1 and B2 Bearer Channel Status Messages 56K Connected at 56K call type. 64K Connected at 64K call type. Audio Connec ...

  • ADTRAN 1200070L1 - page 136

    Appendix A: Loop Status Messages 120 Express XL/XLT User Manual 61200.070L1-1 Routing Incoming call state in transition . Waiting Call is between states or waiting for switch. ...

  • ADTRAN 1200070L1 - page 137

    61200.070L1-1 Express XL/XLT User Manual 121 Appendix B Log Messages The Express XL/XLT Logs menu contains messages of events that occur. The definitions for some of those log messages are as follows: PPP Log Messages B-Channels bundled level 5 Both B-channels are bundled under multilink PPP going to a single PPP peer. BACP <X> down level 5 B ...

  • ADTRAN 1200070L1 - page 138

    Appendix B: Log Messages 122 Express XL/XLT User Manual 61200.070L1-1 Can't find user profile level 2 The Express XL/XLT could not find an appropriate user profile for an incom- ing call. Make sure that a profile has been entered under Configuration/Con- nection List or that a default profile exists. A default profile is one which has the name ...

  • ADTRAN 1200070L1 - page 139

    Appendix B: Log Messages 61200.070L1-1 Express XL/XLT User Manual 123 IPXCP <X> down level 5 IPX Control Protocol port <X> has been dropped between Express XL/XLT and PPP peer. IPXCP <X> up level 5 IPX Control Protocol port <X> has been successfully negotiated between Ex- press XL/XLT and PPP peer. LCP <X> down level 5 ...

  • ADTRAN 1200070L1 - page 140

    Appendix B: Log Messages 124 Express XL/XLT User Manual 61200.070L1-1 No IP addr for peer level 2 The Express XL/XLT cannot continue the connection because there was no IP address received from the PPP peer or it was not set in Configuration/Con- nection List/IP/Route/IP/Net parameter. No more bundles avail level 3 The Express XL/XLT cannot bundle ...

  • ADTRAN 1200070L1 - page 141

    Appendix B: Log Messages 61200.070L1-1 Express XL/XLT User Manual 125 Peer failed PAP authen level 3 The PPP peer’s reported PAP username and/or password does not match the Express XL/XLT’s parameters. This is most likely caused by PPP peer sending incorrect username and/or password. Make sure the Configuration/Connec- tion List/Authentication ...

  • ADTRAN 1200070L1 - page 142

    Appendix B: Log Messages 126 Express XL/XLT User Manual 61200.070L1-1 AutoSpid Download Started level 4 Lucent AutoSpid download feature has started. AutoSpid Failed level 2 ExpertISDN has failed trying to determine the ISDN line’s SPID format. This can occur if the telephone company is not using standard SPID formats. AutoSpid Passed level 4 Exp ...

  • ADTRAN 1200070L1 - page 143

    Appendix B: Log Messages 61200.070L1-1 Express XL/XLT User Manual 127 Bandwidth drop level 4 The Express XL/XLT is dropping a B-channel call in order to reduce band- width. Bandwidth request level 4 The Express XL/XLT is dialing another B-channel in order to increase band- width. Bandwidth Restore level 4 The Express XL/XLT is re-dialing destinatio ...

  • ADTRAN 1200070L1 - page 144

    Appendix B: Log Messages 128 Express XL/XLT User Manual 61200.070L1-1 CallID 1 in use level 2 An outgoing call on LDN 1 was dumped because it was already busy with a call. CallID 2 in use level 2 A outgoing call on LDN 2 was dumped because it was already busy with a call. Can't answer, Call not ringing level 1 Internal error as a result of try ...

  • ADTRAN 1200070L1 - page 145

    Appendix B: Log Messages 61200.070L1-1 Express XL/XLT User Manual 129 NETWORK_CONGESTION NETWORK_OUT_OF_ORDER NO_CIRCUIT_AVAILABLE NO_ROUTE NO_ROUTE_TO_DEST NO_USER_RESPONDING NON_SEL_USER_CLEAR NONEXISTENT_MSG NORMAL_CLEARING NUMBER_CHANGED OUTGOING_CALL_BARRED PRE_EMPTED PROTOCOL_ERROR REQ_CHANNEL_NOT_AVAIL RESOURCE_UNAVAIL SERVICE_NOT_AVAIL SERV ...

  • ADTRAN 1200070L1 - page 146

    Appendix B: Log Messages 130 Express XL/XLT User Manual 61200.070L1-1 Connected <number> level 5 A call from or to <number> was connected. If no caller ID is available for the ISDN line then <number> will be blank for incoming calls. Demand calling ‘<user>’ level 4 A new call is being placed due to incoming packet routed ...

  • ADTRAN 1200070L1 - page 147

    Appendix B: Log Messages 61200.070L1-1 Express XL/XLT User Manual 131 Fallback to 56K level 4 The Express XL/XLT is re-dialing the same destination at 56K call type be- cause the 64K call type failed. FarDN=<number> level 5 This is far-end directory number for an incoming call. Hangup <number> level 5 A call from or to <number> wa ...

  • ADTRAN 1200070L1 - page 148

    Appendix B: Log Messages 132 Express XL/XLT User Manual 61200.070L1-1 L2 #2 not up level 2 A call attempt was stopped because ISDN layer 2 is down trying to get second TEI. L3 not up level 2 A call attempt was stopped because ISDN layer 3 is down trying to register first SPID. L3 #2 not up level 2 A call attempt was stopped because ISDN layer 3 is ...

  • ADTRAN 1200070L1 - page 149

    Appendix B: Log Messages 61200.070L1-1 Express XL/XLT User Manual 133 NOT end2end ISDN level 4 The path that the call was routed over is not ISDN from end-to-end. This is a warning and is most often seen for POTS calls. Power Up - last down cause: <reason> level 0 (displayed as level 1 after the unit is reset) This is the <reason> for t ...

  • ADTRAN 1200070L1 - page 150

    Appendix B: Log Messages 134 Express XL/XLT User Manual 61200.070L1-1 Retrieved <number> level 5 The Express XLT has retrieved a previously held call. If no caller ID is avail- able for the ISDN line, then <number> will be blank for incoming calls. Ring <number> level 5 An incoming call from <number> was ringing. If no calle ...

  • ADTRAN 1200070L1 - page 151

    Appendix B: Log Messages 61200.070L1-1 Express XL/XLT User Manual 135 DHCP response sent level 4 A DHCP response was successfully sent to requesting device. DHCP socket failed level 1 Internal error occurred when attempting to start DHCP server. DHCP: Host not added to ARP table level 2 The DHCP server could not add requesting host to ARP table. In ...

  • ADTRAN 1200070L1 - page 152

    Appendix B: Log Messages 136 Express XL/XLT User Manual 61200.070L1-1 telclient bad host level 2 Telnet client could not use host name or IP address set in Configuration/Util- ities/Telnet Client/Host. telclient bad init level 2 Telnet client could not initialize a session. Telnet Client: Clr TCBF_BUFFER flag failed level 6 Debugging message relate ...

  • ADTRAN 1200070L1 - page 153

    Appendix B: Log Messages 61200.070L1-1 Express XL/XLT User Manual 137 TELNETD: Clr TCBF_BUFFER flag failed level 6 Debugging message related to Telnet client function. TELNETD: could not obtain peer ip level 2 Telnet server function could not get IP address of Telnet client. TELNETD: Session failed, error level 2 A Telnet server session has failed ...

  • ADTRAN 1200070L1 - page 154

    Appendix B: Log Messages 138 Express XL/XLT User Manual 61200.070L1-1 ...

  • ADTRAN 1200070L1 - page 155

    61200.070L1-1 Express XL/XLT User Manual 139 Appendix C SNMP Understanding SNMP As Local Area Network (LAN) environments became standardized over the past ten years, multi-vendor equipment grew with competition. It became necessary to manage the various vendor equipment from a single control con- sole. Thus, the Simple Network Management Protocol ( ...

  • ADTRAN 1200070L1 - page 156

    Appendix C: SNMP 140 Express XL/XLT User Manual 61200.070L1-1 Using SNMP Version 1, the network manager can issue three types of com- mands: • GetRequest : This command retrieves a single item or the first in a series from a network device. • GetNextRequest : This command retrieves the next item in a series from a network device. • SetRequest ...

  • ADTRAN 1200070L1 - page 157

    Appendix C: SNMP 61200.070L1-1 Express XL/XLT User Manual 141 Communities The Express XL/XLT permits up to eight communities to be defined. The privilege level of each community can be set. The default community is public with read-only privileges. When the IP address is all zeros, any manager of the community can access the Express XL/XLT. Traps U ...

  • ADTRAN 1200070L1 - page 158

    Appendix C: SNMP 142 Express XL/XLT User Manual 61200.070L1-1 ...

  • ADTRAN 1200070L1 - page 159

    61200.070L1-1 Express XL/XLT User Manual 143 Appendix D Connector Pinouts Table D-A IBM/AT Style EIA-232 Interface I = Input O = Output N/A = Not Applicable N/C = Not Connected Table D-B RJ-45 ISDN BRI U Pin Name I/O Description 1 CD N/C Carrier Detect 2 RD O Receive Data 3 TD I T ransmit Data 4 DTR N/C Data T erminal Ready 5 GND N/A Signal Ground ...

  • ADTRAN 1200070L1 - page 160

    Appendix D: Connector Pinouts 144 Express XL/XLT User Manual 61200.070L1-1 Table D-C RJ-11 POTS Table D-D 10BaseT Ethernet The switch position can be set for either TO NIC or T O HUB on the back panel of the Express XL/XLT. The rear panel is illustrated in Figure 1-7 on page 18. Pin 3 Ring Pin 4 Tip Switch Position TO NIC TO HUB Pin 1 TX1 RX1 Pin 2 ...

  • ADTRAN 1200070L1 - page 161

    61200.070L1-1 Express XL/XLT User Manual 145 Appendix E Terminal Mode Commands The Express XL/XLT supports a command line interface. All menu options are configurable and readable from the terminal mode. Additional commands are also available. Menu Commands Every menu item in the menu structure can be accessed through the terminal mode interface. T ...

  • ADTRAN 1200070L1 - page 162

    Appendix E: Terminal Mode Commands 146 Express XL/XLT User Manual 61200.070L1-1 One of the following key words must be used first: Some examples are listed below: isdn spid_1 20555512340101 sets spid 1 telnet user 1 name ÒguestÓ sets user name for telnet user list entry 1 to “guest” dial 3 dial dials the numbers for connection list profile nu ...

  • ADTRAN 1200070L1 - page 163

    Appendix E: Terminal Mode Commands 61200.070L1-1 Express XL/XLT User Manual 147 Additional Commands Other commands available from the terminal mode are given below: Download/Uploading Configuration The Express XL/XLT’s configuration can be captured to a text file using the download command. The text file can be edited if required. Upload of the c ...

  • ADTRAN 1200070L1 - page 164

    Appendix E: Terminal Mode Commands 148 Express XL/XLT User Manual 61200.070L1-1 ...

  • ADTRAN 1200070L1 - page 165

    61200.070L1-1 Express XL/XLT User Manual 149 Glossary 10Base2 IEEE 802.3 specification, similar to Ethernet, using thin coaxial cable that runs at 10 Mbps, with a maximum distance of 185 meters per segment. Also known as Thin Ethernet or Thinwire Ethernet. 10BaseT IEEE 802.3 specification, using unshielded twisted-pair cabling and running at 10 Mbp ...

  • ADTRAN 1200070L1 - page 166

    Glossary 150 Express XL/XLT User Manual 61200.070L1-1 central office (CO) In telephony, the phone company switching facility or center, usually a Class 5 end office, at which subscribers local loops terminate. Handles a specific geographic area, identified by the first three digits of the local telephone num- ber. Usually the facilities of the loca ...

  • ADTRAN 1200070L1 - page 167

    Glosssary 61200.070L1-1 Express XL/XLT User Manual 151 hop count A routing metric used to measure the distance between a source and a desti- nation. Particularly used by RIP. hub (1) Communications center, (2) Major routing station for connecting channels, (3) DDS connecting center. IEEE Institute of Electrical and Electronic Engineers. Professiona ...

  • ADTRAN 1200070L1 - page 168

    Glossary 152 Express XL/XLT User Manual 61200.070L1-1 interworking Communication between two types of networks or end equipment. This may or may not involve a difference in signalling or protocol elements supported. Internet Protocol A TCP/IP protocol describing software that tracks the Internet address of nodes, routes outgoing message, and recogn ...

  • ADTRAN 1200070L1 - page 169

    Glosssary 61200.070L1-1 Express XL/XLT User Manual 153 message The Layer 3 information that is passed between the CPE and SPCS for signal- ling. multipoint line A communications line having multiple cable access points. Name Binding Protocol (NBP) The AppleTalk transport-level protocol that translates a character string name into the internet addre ...

  • ADTRAN 1200070L1 - page 170

    Glossary 154 Express XL/XLT User Manual 61200.070L1-1 point-to-point protocol (PPP) An implementation of TCP/IP which is intended for transmission using tele- phone lines. PPP provides router-to-router and host-to-network connections over both synchronous and asynchronous circuits. poison routes Routes which have an infinite metric which to other r ...

  • ADTRAN 1200070L1 - page 171

    Glosssary 61200.070L1-1 Express XL/XLT User Manual 155 serving area Region surrounding a broadcasting station where signal strength is at or above a stated minimum. The geographic area handled by a telephone central office facility. Generally equivalent to a LATA. SNMP Simple Network Management Protocol. SNMP provides a means to monitor and set net ...

  • ADTRAN 1200070L1 - page 172

    Glossary 156 Express XL/XLT User Manual 61200.070L1-1 Telnet The TCP/IP standard protocol for remote terminal connection service. Telnet allows a user at one site to interact with a remote timesharing system at anoth- er site as if the user's terminal were connected directly to the remote machine. TCP/IP Transmission Control Protocol/Internet ...

  • ADTRAN 1200070L1 - page 173

    Glosssary 61200.070L1-1 Express XL/XLT User Manual 157 U-interface A twisted pair subscriber loop that connects the NT1 reference point to the ISDN network, as defined in the I.411 Recommendation. This interface pro- vides Basic Rate Access with an operating frequency of 160 kbps and an infor- mation rate of 144 kbps. Under U.S. regulations, this a ...

  • ADTRAN 1200070L1 - page 174

    Glossary 158 Express XL/XLT User Manual 61200.070L1-1 ...

  • ADTRAN 1200070L1 - page 175

    61200.070L1-1 Express XL/XLT User Manual 159 Acronyms AEP ................... AppleTalk Echo Protocol AMI ................... Alternate Mark Inversion ARP ................... Address Resolution Protocol B (Channel) .... A 64 kbps digital information channel BCP ................... Bridge Control Protocol BONDING ...... Bandwidth On Demand Interoper ...

  • ADTRAN 1200070L1 - page 176

    Acronyms 160 Express XL/XLT User Manual 61200.070L1-1 ISDN ..................Integrated Services Digital Network ISO .....................International Standardization Organization ISP ......................Internet Service Provider kbps ...................Kilobits per second kHz ....................Kilohertz LAN ...................Local Area Netwo ...

  • ADTRAN 1200070L1 - page 177

    61200.070L1-1 Express XL/XLT User Manual 161 Index Numerics 10-base-T interface 144 56K 76 64K 76 A address table 55 address table/aging 55 address table/forward policy 55 agent 139, 140 applications multiple users to ISP using NAT 10 single user to corporate LAN 8 single user to ISP using NAT 9 SOHO to corporate LAN 11 area code 37 ARP cache 92 AT ...

  • ADTRAN 1200070L1 - page 178

    Index 162 Express XL/XLT User Manual 61200.070L1-1 bridge/WAN IP bridge 50 bridge/WAN IPX bridge 51 bridging 13 concurrent routing and bridging 15 demand 12 C call log 100 call log messages 125 call log/active 100 call log/clear 101 call log/level 101 call log/view 101 call log/wrap 101 call sessions 90 call sessions/session1 and session2 91 call s ...

  • ADTRAN 1200070L1 - page 179

    Index 61200.070L1-1 Express XL/XLT User Manual 163 dial 15, 37 dial line 36 dial line/area code 37 dial line/ExpertISDN 36 dial line/LDN 1 or 2 38 dial line/SPID 1 37 dial line/switch protocol 37 dial menu 27, 88 dial out 75 dial out/attempts 76 dial out/call type 75 dial out/connection timeout 76 dial out/delay 76 dial out/initial channels 77 dial ...

  • ADTRAN 1200070L1 - page 180

    Index 164 Express XL/XLT User Manual 61200.070L1-1 G GetNextRequest 140 H hang up 14 hang-up 13 hello time 53 I idle timeout 13 IETF 19 if the Express XL/XLT does not read ready 107 if you are unable to connect calls 113 indicators LAN 16 test 17 WAN 17 installation 21 interface Ethernet 115 network 115 POTS 115 internet connecting to 19 internet a ...

  • ADTRAN 1200070L1 - page 181

    Index 61200.070L1-1 Express XL/XLT User Manual 165 L LAN bridge 11 LAN connection 21 LAN indicators 16 LAN port 53 LAN port/active 53 LAN port/path cost 54 LAN port/priority 54 LAN stats 96 LDN 38 leased line 38 leased line/channel rate 38 leased line/clock mode 38 LEDs 17 log messages 121 logs menu 29, 99 logs/call log 100 logs/network log 101 log ...

  • ADTRAN 1200070L1 - page 182

    Index 166 Express XL/XLT User Manual 61200.070L1-1 O ordering ISDN 19 P packets filtering 59 PAP 58, 66 parity 87 password 84, 86 pattern filter defines 60 physical specifications 116 ping 103 ping test 17 poison reverse 43, 69 POTS 12, 39 POTS interface 115 POTS/NI-1 conference FI 39 POTS/NI-1 transfer FI 39 POTS/POTS assignment 39 POTS/speech cal ...

  • ADTRAN 1200070L1 - page 183

    Index 61200.070L1-1 Express XL/XLT User Manual 167 route/netmask 68 route/private 68 route/static route 68 routing concurrent routing and bridging 15 demand 12 IP 14 IPX 15 multiprotocol 3 over PPP bridging 15 Rx only 43 S samples/sample rate 78 samples/samples 78 samples/time between changes 79 SAP 12, 15 SAP timer 49 security 20 security levels 3 ...

  • ADTRAN 1200070L1 - page 184

    Index 168 Express XL/XLT User Manual 61200.070L1-1 switch protocol 37 system contact 35 system info menu 34 system location 34 system mame 34 system uptime 35 T telephone connection 22 Telnet 20, 83 Telnet client 104 Telnet/server access 83 Telnet/user list 84 terminal menu navigating 30 structure 27 top level 28 terminal mode 87 terminal mode comm ...

  • ADTRAN 1200070L1 - page 185

    Index 61200.070L1-1 Express XL/XLT User Manual 169 W WAN indicators 17 WAN IP bridge 50 WAN IP bridge proxy ARP 51 WAN IP bridge/netmask 51 WAN IP bridge/network 51 WAN IP bridge/triggered 51 WAN IPX bridge 51 WAN IPX bridge/frame type 52 WAN IPX bridge/network 52 WAN IPX bridge/seed status 52 WAN IPX bridge/triggered 52 WAN menu 36 WAN port 54 WAN ...

  • ADTRAN 1200070L1 - page 186

    Index 170 Express XL/XLT User Manual 61200.070L1-1 ...

  • ADTRAN 1200070L1 - page 187

    Product Support Information Presales Inquiries and Applications Support Please contact your local distributor, ADTRAN Applications Engineering, or ADTRAN Sales: Post-Sale Support Please contact your local distributor first. If your local distributor cannot help, please contact ADTRAN Technical Support and have the unit serial number available. Repa ...

Fabricant ADTRAN Catégorie Network Router

Les documents que nous recevons du fabricant de l'appareilADTRAN 1200070L1 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques ADTRAN
- manuels d’utilisations 1200070L1
- fiches produit ADTRAN
- dépliants
- ou étiquettes-énergie ADTRAN 1200070L1
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation ADTRAN 1200070L1.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation ADTRAN 1200070L1, manuels d’entretien, brefs manuels ou manuels de l’utilisateur ADTRAN 1200070L1. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit ADTRAN 1200070L1.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil ADTRAN 1200070L1, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser ADTRAN 1200070L1 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs ADTRAN 1200070L1.

Le manuel d’utilisation complet ADTRAN, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel ADTRAN 1200070L1 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières ADTRAN 1200070L1, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lADTRAN 1200070L1 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil ADTRAN 1200070L1 - qui devraient nous aider dans les premières étapes lors de l'utilisation ADTRAN 1200070L1
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de ADTRAN 1200070L1
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service ADTRAN 1200070L1 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de ADTRAN 1200070L1?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec ADTRAN 1200070L1, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec ADTRAN 1200070L1 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)