Manuel d’utilisation Cisco Systems 1010 Series

30 pages 1.26 mb
Télécharger

Aller à la page of 30

Summary
  • Cisco Systems 1010 Series - page 1

    Corporate Headquarters: Copyright © 20 03 Cisco Systems, Inc. All rights reserved. Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series Read this document before installing or servicing the following Catalyst 8500 and LightStream 1010 ...

  • Cisco Systems 1010 Series - page 2

    2 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Site Preparation • Related Documentation, page 26 • Obtaining Documentation, page 27 • Obtaining T echnical Assistance, page 28 • Obtaining Additional Publications and Information, page 30 Site Preparation This section describes the ...

  • Cisco Systems 1010 Series - page 3

    3 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Site Preparation Rack-Mounting the System A rack-mount kit and cable guides come with the system. The kit is not suitable for racks with obstructions (such as a power strip) that could impair access to system components. Allo w suff icient c ...

  • Cisco Systems 1010 Series - page 4

    4 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Site Preparation Figur e 1 Catalyst 8540 Chassis Standard Equipment Rac k Dimensions 79100 17.25 " (45.09 cm) 19.25 " (48.09 cm) ...

  • Cisco Systems 1010 Series - page 5

    5 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Site Preparation Figur e 2 Catalyst 851 0 and LightStr eam 1 0 1 0 Chassis Standard Equipment Rac k Dimensions • Ensure that the weight of the chassis does not make the rack unstable. Secure telco racks with ceiling brackets if the rack is ...

  • Cisco Systems 1010 Series - page 6

    6 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Site Preparation Figure 3 shows the number of people needed to lift the system by weight. Figur e 3 Saf ely Lifting the Syst em Power Considerations A C and DC power supplies, and an optional redundant (second) po wer supply , are av ailable ...

  • Cisco Systems 1010 Series - page 7

    7 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Site Preparation Using Redundant Power If your system includes an optional redundant (second) power supply , connect each of the two power supplies to dif ferent input po wer sources. Failure to do so mak es the system susceptible to total p ...

  • Cisco Systems 1010 Series - page 8

    8 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Site Preparation Disconnecting Power Follo w these guidelines when disconnecting power: • Locate the emergenc y power-of f switch for the room before working with the system. • T urn off the po wer and disconnect the power from the circu ...

  • Cisco Systems 1010 Series - page 9

    9 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Regulatory Standards Compliance • Direct the f low of cooling air through the chassis • Protect the backplane from dust Disposing of the System Dispose of the system and its components (including batteries) as specif ied by all national ...

  • Cisco Systems 1010 Series - page 10

    10 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Regulatory Standards Compliance T able 2 lists the NEBS and ETSI specif ications that the Catalyst 8500 MSR, Catalyst 8500 CSR, and LightSteam 1010 series switches are designed to meet. FCC Part 68 Notice The T1 IMA (Model C85MS-8T1-IMA) an ...

  • Cisco Systems 1010 Series - page 11

    11 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Regulatory Standards Compliance CS-03 Certification The T1 IMA interface module is CS-03 certif ied. See T able 4 for CS-03 approv al details for the equipment. Observe the follo wing general information and safety precautions: The industry ...

  • Cisco Systems 1010 Series - page 12

    12 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Regulatory Standards Compliance JATE The T1 IMA interface module meets the requirements of the Japan Appro v als Institute for T elecommunications Equipment (J A TE). T able 5 provides the J A TE approv al details for modules. European Comm ...

  • Cisco Systems 1010 Series - page 13

    13 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Regulatory Standards Compliance EMC Environmental Conditions in the European Union This equipment is intended to operate under the following en vironmental conditions with respect to EMC: • A separate def ined location under the user’ s ...

  • Cisco Systems 1010 Series - page 14

    14 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Regulatory Standards Compliance Canada Class A Warning Warning This Class A digital apparatus complies with Canadian ICES-003. Cet appareil num è rique de la classe A est conforme á la norme NMB-003 du Canada. CISPR 22 Class A Warning Thi ...

  • Cisco Systems 1010 Series - page 15

    15 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Regulatory Standards Compliance Class A Notice for Hungary Korean Class A Warning Warning This equipment is a class A product and should be used and installed properly according to the Hungarian EMC Class A requirements (MSZEN55022). Class ...

  • Cisco Systems 1010 Series - page 16

    16 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Translated Safety Warnings This section includes translations in multiple languages of the warnings that may appear in the Catalyst 8500 MSR, Catalyst 8500 CSR, and LightSteam 1010 series switch product documents. ...

  • Cisco Systems 1010 Series - page 17

    17 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Warnung WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr . Sie bef inden sich in einer Situation, die zu V erletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elekt ...

  • Cisco Systems 1010 Series - page 18

    18 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings V arning! VIKTIGA SÄKERHETSANVISNINGAR Denna varningssignal signalerar fara. Du bef inner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om ...

  • Cisco Systems 1010 Series - page 19

    19 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Backplane Voltage Warning Hazardous voltage or energy is present on the backplane when the system is operating. Use caution when servicing. Waarschuwing Er is gevaarlijke spanning of energie aanwezig op de achterp ...

  • Cisco Systems 1010 Series - page 20

    20 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Ground Conductor Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor . Contact the appropriate electrical ins ...

  • Cisco Systems 1010 Series - page 21

    21 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Restricted Area Warning Warning This unit is intended for installation in restricted access areas. A restricted access area is where access can only be gained by service personnel through the use of a special tool ...

  • Cisco Systems 1010 Series - page 22

    22 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Qualified Personnel Warning Avvertenza Questa unità deve essere installata in un'area ad accesso limitato. Un'area ad accesso limitato è un'area accessibile solo a personale di assistenza tramite ...

  • Cisco Systems 1010 Series - page 23

    23 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Warning Definition V arning Denna utrustning ska endast installeras och bytas ut av utbildad och kvalificerad personal. Warning This warning symbol means danger . Y ou are in a situation that could cause bodily in ...

  • Cisco Systems 1010 Series - page 24

    24 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Warnung Dieses Warnsymbol bedeutet Gefahr . Sie bef inden sich in einer Situation, die zu einer Körperverletzung führen könnte. Bevor Sie mit der Arbeit an irgendeinem Gerät beginnen, seien Sie sich der mit el ...

  • Cisco Systems 1010 Series - page 25

    25 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Translated Safety Warnings Disconnect Device Warning Laser Radiation Warning Warning A readily accessible two-poled disconnect device must be incorporated in the fixed wiring. Waarschuwing Er moet een gemakkelijk toegankelijke, tweepolige s ...

  • Cisco Systems 1010 Series - page 26

    26 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Related Documentation Related Documentation The follo wing sections describe the documentation av ailable for the Catalyst 8510 and the LightStream 1010 A TM switch. T ypically , these documents consist of hardware installation guides, soft ...

  • Cisco Systems 1010 Series - page 27

    27 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Obtaining Documentation This document should be used in conjunction with the documents listed in the following sections: • Platform Documents, page 27 • Software Documents, page 27 Platform Documents The following is a list of the platf ...

  • Cisco Systems 1010 Series - page 28

    28 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Obtaining Technical Assistance Documentation CD-ROM Cisco documentation and additional literature are av ailable in a Cisco Documentation CD-R OM package, which may hav e shipped with your product. The Documentation CD-ROM is updated re gul ...

  • Cisco Systems 1010 Series - page 29

    29 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Obtaining Technical Assistance Cisco TAC Website The Cisco T AC website ( http://www .cisco.com/tac ) provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The Cisco T A ...

  • Cisco Systems 1010 Series - page 30

    30 Regulatory Compliance and Safety Information for the Catalyst 8500 and LightStream 1010 Series 78-14229-02 Obtaining Additional Publications and Information Obtaining Additional Publications and Information Information about Cisco products, technologies, and network solutions is a vailable from v arious online and printed sources. • The Cisco ...

Fabricant Cisco Systems Catégorie Switch

Les documents que nous recevons du fabricant de l'appareilCisco Systems 1010 Series peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Cisco Systems
- manuels d’utilisations 1010 Series
- fiches produit Cisco Systems
- dépliants
- ou étiquettes-énergie Cisco Systems 1010 Series
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Cisco Systems 1010 Series.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Cisco Systems 1010 Series, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Cisco Systems 1010 Series. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Cisco Systems 1010 Series.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Cisco Systems 1010 Series, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Cisco Systems 1010 Series par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Cisco Systems 1010 Series.

Le manuel d’utilisation complet Cisco Systems, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Cisco Systems 1010 Series - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Cisco Systems 1010 Series, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lCisco Systems 1010 Series qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Cisco Systems 1010 Series - qui devraient nous aider dans les premières étapes lors de l'utilisation Cisco Systems 1010 Series
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Cisco Systems 1010 Series
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Cisco Systems 1010 Series dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Cisco Systems 1010 Series?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Cisco Systems 1010 Series, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Cisco Systems 1010 Series il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)