Manuel d’utilisation Barco 16x16

90 pages 1.3 mb
Télécharger

Aller à la page of 90

Summary
  • Barco 16x16 - page 1

    rëÉêÛë=dìáÇÉ N SñN S=~åÇ=UñU=eaLpaJpaf=oçìí Éê • Manual # 26-0401 000-00 • Revision A • June 29, 2005 ...

  • Barco 16x16 - page 2

    ii MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’s Guide NSñNS=~åÇ=UñU=eaLpaJpaf=oçìíÉê= √ =rëÉêÛë=dìáÇÉ `çéóêáÖÜí © Barco, Inc. June 29, 2005 All rights reserved. No pa rt of this docume nt may be copied, reproduce d or translated. It shall not otherwise be recorded, transmitted or stored in a retr ieval sys ...

  • Barco 16x16 - page 3

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’s Guide iii If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if the goods are ha ndled incorrectly , in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to influences ...

  • Barco 16x16 - page 4

    iv MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide léÉê~íçêë=p~ÑÉíó=pìãã~êó The general safety informa tio n in this summary is for operating personnel. aç=kçí=oÉãçîÉ=`çîÉêë=çê=m~åÉäë There are no user-serviceable parts within the unit. Removal of the top cover will expose dangerous voltages. T o ...

  • Barco 16x16 - page 5

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide v qÉêãë=få=qÜáë=j~åì~ä=~åÇ=bèìáéãÉåí=j~êâáåÖ= t^okfkd Highlights an operating procedure, practice, condit ion, statement, etc., wh ich, if not strictly observed, could result in injury to or death of personnel. `^rqflk The exclamation point within an equilat ...

  • Barco 16x16 - page 6

    vi MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide `Ü~åÖÉ=eáëíçêó The table below lists the changes to the 16x16 and 8x8 HD/SD-SDI Router User ’s Guide. T able 0-1. Change History Rev Date ECO # Description Approved By 01 6/9/04 Initial Release L. Gilstrom 05 3/28/05 Updates P . Norton A 6/29/05 1458 Release J. Pacak ...

  • Barco 16x16 - page 7

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’s Guide vii q~ÄäÉ=çÑ=`çåíÉåíë `Ü~éíÉê=N fåíêçÇìÅíáçå =K=K=K=K=K=K=K=K =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K =K=K=K=K=K=K=K=K=K=K= N In This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Chapte ...

  • Barco 16x16 - page 8

    viii MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide Table of Contents `Ü~éíÉê=Q drf=fåëí~ää~íáçå=~åÇ=léÉê~íáçå K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=PN In This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Control GUI Installati on . . . ...

  • Barco 16x16 - page 9

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide ix Table of Conte nts MatrixPRO Serial Command Li st/Description . . . . . . . . . . . . . . . . . . . 66 HELP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 CLEAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Barco 16x16 - page 10

    x MatrixPRO • 16x16 and 8x8 HD/SD-S DI Router • User ’s Guide Table of Contents ...

  • Barco 16x16 - page 11

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 1 N K==fåíê çÇìÅ íáçå få=qÜáë=`Ü~éíÉê This chapter is designed to introduce you to the Matri xPRO™ 16x16 and 8x8 HD/SD-SDI Router User ’s Guide. Areas to be covered are: • Chapter Structure • How to Use This G uide • Conventions • About the MatrixPRO ? ...

  • Barco 16x16 - page 12

    2 MatrixPRO • 16x16 and 8x8 HD/SD-S DI Router • User ’s Guide NK==fåíêçÇìÅíáçå Chapter Structure `Ü~éíÉê=píêìÅíìêÉ The following chapte rs provide instructions for all aspects of MatrixPRO 16x16 and 8x8 HD/SD-SDI Router operations: • Chapter 1, “ I ntroduction ” provides a system overview , a list of features, an ...

  • Barco 16x16 - page 13

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 3 NK==fåíêçÇìÅíáçå How to Use This Guide eçï=íç=rëÉ=qÜáë=dìáÇÉ Following are important tips for streamlining your use of this User’s Guide in its electronic “PDF” form. k~îáÖ~íáåÖ Use Acrobat Reader ’s “bookmarks” to navigate to the desired ...

  • Barco 16x16 - page 14

    4 MatrixPRO • 16x16 and 8x8 HD/SD-S DI Router • User ’s Guide NK==fåíêçÇìÅíáçå About the MatrixPRO ^Äçìí=íÜÉ=j~íêáñmol The MatrixPRO 16x16 digital router is av ailable in HD-SDI or SD-SDI versions: • The HD-SDI router can route HD-SDI, adherin g to SMPTE 292 or SD-SDI signals adhering to SMPTE 259. • The SD-SDI route ...

  • Barco 16x16 - page 15

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 5 NK==fåíêçÇìÅíáçå Technical Description qÉÅÜåáÅ~ä=aÉëÅêáéíáçå The MatrixPRO Serial Digital switcher is available in three versions. • The 16x16 HD-SDI is a serial di gital matrix switcher adheri ng to SMPTE 292M and SMPTE 259M with 16 inputs and 16 outp ...

  • Barco 16x16 - page 16

    6 MatrixPRO • 16x16 and 8x8 HD/SD-S DI Router • User ’s Guide NK==fåíêçÇìÅíáçå Technical Description ...

  • Barco 16x16 - page 17

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 7 O K = = e ~ êÇï~ êÉ = f å ë í~ ä ä ~ í á ç å få=qÜáë=`Ü~éíÉê This chapter provides d etailed instructions for installing the MatrixPRO 1 6x16 and 8x8 HD/ SD-SDI Router hardware. The following topics are discu ssed: • Safety Precautions • Unpacking and Ins ...

  • Barco 16x16 - page 18

    8 MatrixPRO • 16x16 and 8x8 HD/SD-S DI Router • User ’s Guide 2. Hardware Installation Safety Precautions p~ÑÉíó=mêÉÅ~ìíáçåë= For all MatrixPRO 16x16 and 8x8 HD/SD-SDI Ro uter installation procedures, ob serve th e following important safety and handling rules to avoid damage to yourself and the equipment: • T o protect users f ...

  • Barco 16x16 - page 19

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 9 2. Hardware Installation Rear Panel Connectors oÉ~ê=m~åÉä=`çååÉÅíçêë The figures below illustrate the Matri xPRO 16x16 and 8x8 rear panels: Figure 2-1. MatrixPRO 16x16 HD-SDI and SD -SDI Rear Panel Figure 2-2. MatrixPRO 8x8 HD-SDI Rear Panel 100-240 V 50-60 Hz 3.0 A O ...

  • Barco 16x16 - page 20

    10 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 2. Hardware Installation Rack-Mount Installation o~ÅâJjçìåí=fåëí~ää~íáçå MatrixPRO 16x an d 8x Digital Router un its are designed to be rack mounte d. Please note the following important points: • When rack mounting the unit, remem ber that maximum ambient opera ...

  • Barco 16x16 - page 21

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 1 1 2. Hardware Installation Power Cord/Lin e Vo ltage Selection mçïÉê=`çêÇLiáåÉ=sçäí~ÖÉ=pÉäÉÅíáçå The MatrixPRO 16x Matrix Switcher perfo rms line voltage selection automatically . No user controls are required for line voltage selection. The AC power cords mu ...

  • Barco 16x16 - page 22

    12 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 2. Hardware Installation Video Input/Output Connecti ons sáÇÉç=fåéìíLlìíéìí=`çååÉÅíáçåë The figure below illustra tes the input a nd output connecto rs on the 16x16 panel: Figure 2-1. MatrixPRO 16x16 Input/Outpu t Connectors The figure below illustra tes th ...

  • Barco 16x16 - page 23

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 13 PK==léÉê ~íáçå få=qÜáë=`Ü~éíÉê This chapter provides de tailed operating in structions for the MatrixPRO 16x16 and 8x8 HD/ SD-SDI Routers. The following topics are discu ssed: • Control Overvi ew • MatrixPRO Power-Up Initialization • MatrixPRO Front Panels ? ...

  • Barco 16x16 - page 24

    14 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 3. Operation Control Overview `çåíêçä=lîÉêîáÉï This portion of the manual outline s how to cont rol all MatrixPRO functions. There are many means to control the unit available to the user. • First, the front panel is avail able for status and control. T wo keys and ...

  • Barco 16x16 - page 25

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 15 3. Operation MatrixPRO Front Panels j~íêáñmol=cêçåí=m~åÉäë On the MatrixPRO 16x a nd 8x routers, the front panel allows local control and monitoring of the matrix switcher . The figures below ill ustrate the MatrixPRO 16x16 and 8x8 front pan el s: Figure 3-1. MatrixPRO ...

  • Barco 16x16 - page 26

    16 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 3. Operation MatrixPRO Fro nt Pan els 3) Input Crosspoint Selection Buttons At the right-side of the front panel, the 8x and 16x routers each have a set of eight input selection switches on the top row . On the 16x only , unshifted input but to ns access inputs 1-8; shifted butto ...

  • Barco 16x16 - page 27

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 17 3. Operation Menu Structure jÉåì=píêìÅíìêÉ This section illustrates and explai ns all the menus in the MatrixPRO’s menu structure, in the order in which they appear . The followin g topics are discussed: • Menu T ree • Main Menu • Setup Menu • Stat us Me n u ? ...

  • Barco 16x16 - page 28

    18 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 3. Operation Menu Structure jÉåì=qêÉÉ The figure below illustra tes the MatrixPRO Menu T ree . Use this diagra m for reference as you learn the menu structure. Figure 3-3. MatrixPRO Menu Tree Setup Menu Status Menu Reclocking Menu Vertical Switch Menu Save Menu Recall Menu ...

  • Barco 16x16 - page 29

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 19 3. Operation Menu Structure j~áå=jÉåì The figure below illustrates the Main Menu , which contains six items. Each of these items contains at least one sub-menu. Figure 3-4. MatrixPRO Main Menu Please note the following important rules regarding menu usage: • T o enter a sub ...

  • Barco 16x16 - page 30

    20 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 3. Operation Menu Structure pÉíìé=jÉåì From the Main Menu , select Setup to display the Setup Menu . Figure 3-5. MatrixPRO Setup Menu Each menu is explained in detail below: • System Menu • Factory Reset Menu • T ech Support Menu póëíÉã=jÉåì From the Setup M ...

  • Barco 16x16 - page 31

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 21 3. Operation Menu Structure sca=_êáÖÜíåÉëë=jÉåì From the System Menu , select VFD Brightness to adjust the vacuum fluorescent display (VFD) brightness.  T o change brightness: 1. Press SEL , then rotate the selector knob until the desired brightness is achieved. 2. ...

  • Barco 16x16 - page 32

    22 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 3. Operation Menu Structure Please note: • When selecting the baud rate for either RS-232 or RS-485 , the user has these choices: 1200, 2400, 9600, 38 400, 57600. • When selecting the byte format, the user has these choices: ~ N81 , (one start bit, eight data bits, one stop b ...

  • Barco 16x16 - page 33

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 23 3. Operation Menu Structure 4. T o “accept” the new IP address, press ESC at any time to exit the edit mode. The new IP address will take effect at this point. póëíÉã=p~îÉ From the System Menu , select Sy stem Save to save all settings e xcept routing. When pressed, the ...

  • Barco 16x16 - page 34

    24 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 3. Operation Menu Structure qÉÅÜ=pìééçêí=jÉåì From the Setup M enu , select T ech Support to display the T ech Support Menu . Figure 3-12. MatrixPRO T ech Support Menu The T ech Supp ort Menu shows the inst alled version of software, as well as the phone number for fa ...

  • Barco 16x16 - page 35

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 25 3. Operation Menu Structure oÉÅäçÅâáåÖ=jÉåì From the Main Menu , select Recl ocking to display the Reclocking Control Menu , as illustr ated bel o w . Figure 3-14. MatrixPRO Reclocking Control Menu The system’s reclocking circuit s clean up marginal input signals. Th ...

  • Barco 16x16 - page 36

    26 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 3. Operation Menu Structure sÉêíáÅ~ä=fåíÉêî~ä=pïáíÅÜáåÖ=jÉåì From the Main Menu , select V ertical Switch to display the V ertical Interval Swit ching Menu , as illustrated below . Figure 3-15. MatrixPRO V ertica l Interval Switching Menu The source for ver ...

  • Barco 16x16 - page 37

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 27 3. Operation Menu Structure oÉÅ~ää=mêÉëÉíë=jÉåì From the Main Menu , select Recall to display the Re call Presets Menu , as illustrated below . Figure 3-17. MatrixPRO Recall Presets Menu There are eight video signal configuration pre sets that can be recalled.  T o ...

  • Barco 16x16 - page 38

    28 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 3. Operation Control of Digital Video Switching `çåíêçä=çÑ=aáÖáí~ä=sáÇÉç=pïáíÅÜáåÖ=======  Use the following steps to perform a switch: 1. Select an output channel (d estination) from among the l ower eight output buttons. On the 16x onl y , use the SH ...

  • Barco 16x16 - page 39

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 29 3. Operation Establishing Groups of Inputs and Outputs bëí~ÄäáëÜáåÖ=dêçìéë=çÑ=fåéìíë=~åÇ=lìíéìíë The MatrixPRO routers can be set up to "lock-out" input sources that are in compatible with certain output display devices. S Example : Input ch ...

  • Barco 16x16 - page 40

    30 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 3. Operation Establishing Groups of Inputs and Outputs  Use the following steps to remove a member of an input/output group: 1. Press and hold any output key other than the one to be removed, if that is the case. 2. Press and release the key of the group me mb er to be removed ...

  • Barco 16x16 - page 41

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 31 QK==drf=fåëí ~ää~íáçå=~åÇ=léÉê ~íáçå få=qÜáë=`Ü~éíÉê This chapter describes the installation and operation of th e MatrixPRO interactive Control GUI. The following topics are discussed: • Control GUI Inst allation • Equipment Setup • Remote Etherne ...

  • Barco 16x16 - page 42

    32 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 4. GUI Installa tion and Operation Control GUI Installation `çåíêçä=drf=fåëí~ää~íáçå The MatrixPRO Control GUI is an interactive Graphical User Interface application designed to assist users with MatrixPRO operation. There are two ways to obtain the software: • T ...

  • Barco 16x16 - page 43

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 33 4. GUI Installa tion and Operation Control GUI Installation 2. Click Next to display the Choose D estination Dialog : Figure 4-2. Choose Destination D ialog The default install directory is C:Fol som ResearchMatrixPROMPControl . ~ Click Browse to select a differ ent directory , ...

  • Barco 16x16 - page 44

    34 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 4. GUI Installa tion and Operation Control GUI Installation 4. Click Next to begin file transfer . 5. After successfully transferring the file to the directory specified, the Inst allatio n Complete Dialog appears: Figure 4-4. Installation Complete Dialog 6. Click Finish to exit ...

  • Barco 16x16 - page 45

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 35 4. GUI Installa tion and Operation Equipment Setup bèìáéãÉåí=pÉíìé  Use the following steps to set up equipment: 1. Connect the input and output sources on the MatrixPRO. 2. Connect the MatrixPRO remote port to an available serial (RS-232) port on the laptop/PC with ...

  • Barco 16x16 - page 46

    36 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 4. GUI Installa tion and Operation GUI Operation drf=léÉê~íáçå As with all Barco Folsom products, if the ha rdware is populated or functional ity is enabled, the control "keys" will be labelled in black. If channels of hardware are not populated , the "key&q ...

  • Barco 16x16 - page 47

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 37 4. GUI Installa tion and Operation GUI Operation sáÇÉç=pïáíÅÜáåÖ=q~Ä  Use the following steps to utilize the Vi de o Swit ching T ab : 1. Click on the Video Switching T ab on the GUI page. A sample tab is shown below . Figure 4-5. Video Switching T ab (sample) 2. S ...

  • Barco 16x16 - page 48

    38 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 4. GUI Installa tion and Operation GUI Operation of the assigned o utput route, but the Input c hannel assig ned to that particular Output channel c an be read in the green box. 5. T o cancel an Input/Output assignment, click the Cancel key . 6. A manual route may be performed on ...

  • Barco 16x16 - page 49

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 39 4. GUI Installa tion and Operation GUI Operation i~ÄÉäáåÖ=q~Ä Click the Labeling T ab on the MatrixPRO Control application. A sample tab is shown below: Figure 4-6. Labeling T ab (sample) This tab allows the user to assign a name to any input and outp ut channel. The names ...

  • Barco 16x16 - page 50

    40 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 4. GUI Installa tion and Operation GUI Operation dêçìéáåÖ=q~Ä Click the Grouping T ab on the MatrixPRO Control application. A sample tab is shown below: Figure 4-7. Grouping T ab (sample) The MatrixPRO routers can be set up to "lo ck-out" input sources that are ...

  • Barco 16x16 - page 51

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 41 4. GUI Installa tion and Operation GUI Operation 4. Select the next Group number index in the Gr oup column. The ke ys of the original Group 1 outputs will be grayed-out — indica ting that they are no longer availa ble to assign to another group. 5. Click on the Group 1 index nu ...

  • Barco 16x16 - page 52

    42 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 4. GUI Installa tion and Operation GUI Operation pÉèìÉåÅáåÖ=q~Ä Click the Sequencing T ab on the MatrixPRO Control application. A sample tab is shown below: Figure 4-8. Sequencing T ab (sample) The Sequencing T ab enables you to cycle through a sequence of presets. This ...

  • Barco 16x16 - page 53

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 43 4. GUI Installa tion and Operation GUI Operation  Use the following steps to perform a sample sequence : 1. T wo presets were configured and loaded earlier in this tuto rial. Refer to the “ Preset Save And Recall ” section for details. 2. Be sure that the two " On &quo ...

  • Barco 16x16 - page 54

    44 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 4. GUI Installa tion and Operation GUI Operation pÉíìé=q~Ä Click the Setup T ab on the MatrixPRO Control applicatio n. A sample tab is shown below: Figure 4-9. Setup T ab (sample) The Setup T ab allows the user to select the method of MatrixPRO remote control, either RS-232 ...

  • Barco 16x16 - page 55

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 45 4. GUI Installa tion and Operation GUI Operation qÜÉ=?^Äçìí?=q~Ä Click the About T ab on the MatrixPRO Control application. A sample tab is shown below: Figure 4-10. About T a b (sample) This page shows the current GUI software revision as well as the firmware revision runn ...

  • Barco 16x16 - page 56

    46 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 4. GUI Installa tion and Operation GUI Operation ...

  • Barco 16x16 - page 57

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 47 RK==^ ééäáÅ~íáçå=péÉÅáÑáÅ=` çååÉÅ íáçåë få=qÜáë=`Ü~éíÉê This chapter provides system connectivity information. The following to pics are discussed: • Connectivity Diagram ...

  • Barco 16x16 - page 58

    48 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 5. Application Specific Connections Connectivity Diagram `çååÉÅíáîáíó=aá~Öê~ã The figure below provides a samp le connectivity diagram: Figure 5-1. MatrixPRO Connectivity Diagram ( sample) Note that the MatrixPRO digita l switcher product line does no t scan conver ...

  • Barco 16x16 - page 59

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 49 SK==réÖê ~ÇáåÖ=pçÑí ï ~ê É få=qÜáë=`Ü~éíÉê This chapter provides d etailed instructi ons for upgrading syste m software components. The following topics are discu ssed: • Overview • Hardware Requirements • Sof tware Requirement s • Connecting to B arc ...

  • Barco 16x16 - page 60

    50 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 6. Upgrading Software Overview lîÉêîáÉï The MatrixPRO units built by Barco Folsom incorporate system software in a Flash memory component. Flash memory allows ea sy software upgrades, without the need to send the unit back to the factory . The “loader” utility enables ...

  • Barco 16x16 - page 61

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 51 6. Upgrading Software Connecting to Barco Folsom `çååÉÅíáåÖ=íç=_~êÅç=cçäëçã= • Barco Folsom's FTP site address is: ftp.folsom.com • If you are using an FTP client, logon to our site using "anonymous" fo r the user name and your email address a ...

  • Barco 16x16 - page 62

    52 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 6. Upgrading Software Preparing to Upgrade the MatrixPRO mêÉé~êáåÖ=íç=réÖê~ÇÉ=íÜÉ=j~íêáñmol  Use the following steps to prepare to upgrade the MatrixPRO 16x and 8x: 1. Plug the DB-25 male connector into the port labeled RS-232/485 on the back of the Matrix ...

  • Barco 16x16 - page 63

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 53 6. Upgrading Software Uploading Files to Matri xPRO réäç~ÇáåÖ=cáäÉë=íç=j~íêáñmol  Use the following steps to upload files to the MatrixPRO system: 1. Once communication s have been established and verified, click on the " Open script file to read and uplo ...

  • Barco 16x16 - page 64

    54 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e 6. Upgrading Software Uploading Files to MatrixPRO ...

  • Barco 16x16 - page 65

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 55 ^ K==péÉÅáÑáÅ~íáçåë få=qÜáë=^ééÉåÇáñ This appendix provides detailed techni cal spec ification s for the MatrixPRO 16x16 and 8x8 HD/SD-SDI Router. The following topics are provided: • SDI Specifications • HD/SDI Specifications • Common Specifications ...

  • Barco 16x16 - page 66

    56 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e ^K==péÉÅáÑáÅ~íáçåë SDI Specifications paf=péÉÅáÑáÅ~íáçåë= The table below lists MatrixPRO SDI specifications. T able A-1. MatrixPRO SDI S pecifications Parameter Det ail Specification Video Input Number/signal type 16 Unbalanced serial data Connectors 16 B ...

  • Barco 16x16 - page 67

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 57 ^K==péÉÅáÑáÅ~íáçåë HD/SDI Specifications eaLpaf=péÉÅáÑáÅ~íáçåë= The table below lists Matrix PRO HD/SDI specifications. T able A-2. MatrixPRO HD/SDI S pecifications Parameter Det ail Specification Video Input Number/signal type 16 Unbalanced serial data Con ...

  • Barco 16x16 - page 68

    58 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e ^K==péÉÅáÑáÅ~íáçåë Common Specifications `çããçå=péÉÅáÑáÅ~íáçåë= The table below lists common MatrixPRO specifications. T able A-3. MatrixPRO Common S pecifications Parameter Det ail Specification VREF Sync Input Source Channel 1 Input Control/Remote S ...

  • Barco 16x16 - page 69

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 59 _K==oÉ ãçí É=` çåíê çä=mê çí çÅçä få=qÜáë=^ééÉåÇáñ This appendix provides information regarding exte rnal remote control pro tocol. The following topics are discussed: • Default Serial Parameters • RS-232/485 Remote Contro l Co nnections • RS-232 ...

  • Barco 16x16 - page 70

    60 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä Default Serial Parameters aÉÑ~ìäí=pÉêá~ä=m~ê~ãÉíÉêë The following are the parameter settings for seri al communica tion: • Baud Rate = 57600 baud • Parity = NONE • Sto p B i t = 1 • Data Bit = 8 • Echo = ON ? ...

  • Barco 16x16 - page 71

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 61 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä RS-232/485 Remote Control Conn ecti ons opJOPOLQUR=oÉãçíÉ=`çåíêçä=`çååÉÅíáçåë The RS-232 or RS-485 serial port can be conn ected to a compu ter to support remote control of the MatrixPRO u nit. The Electronics In d ...

  • Barco 16x16 - page 72

    62 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä RS-232 Mode opJOPO=jçÇÉ The MatrixPRO will respond with a “ # ” prompt when the command processor is ready for a command. The command syntax is shown below cmd arg1 arg2 … argn<cr> Please note: • A space (ASCII 32) mu ...

  • Barco 16x16 - page 73

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 63 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä RS-485 Mode opJQUR=jçÇÉ T o switch to RS-485, refer to the “ RS-232 Settings Menu ” section in Chapter 3. Single commands will be combined with a command delim iter start, device number , command separator and command delimiter ...

  • Barco 16x16 - page 74

    64 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä RS-485 Mode is not exceeded before completion of the l ast command string. T o minimize bus traffic the command words should be kept as short as possible. T he units will not respond with prompts or any command error conditions. Echo ...

  • Barco 16x16 - page 75

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 65 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä MatrixPRO Remote Comma nds j~íêáñmol=oÉãçíÉ=`çãã~åÇë The table below lists MatrixPRO remote commands. Click the hyperlink for detailed descriptions and exa mples. T able B-4. MatrixPRO Remote Commands Command Description ...

  • Barco 16x16 - page 76

    66 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä MatrixPRO Remote Commands j~íêáñmol=pÉêá~ä=`çãã~åÇ=iáëíLaÉëÅêáéíáçå ebim • Description : Displays a list of available commands on a termi nal emulator such as ProComm or Hypertermi nal. • Parameters : Non ...

  • Barco 16x16 - page 77

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 67 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä MatrixPRO Remote Comma nds d`ib^o=Öêé • Description : Clears the selected grouping informa tion. • Parameters : grp Group number to clear; [1-16] S Example : GCLEAR 1 (Clears the grouping information in group number 1.) dabi=Ö? ...

  • Barco 16x16 - page 78

    68 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä MatrixPRO Remote Commands il^aojm • Description : Places unit into loader mode. This mode is used to perform field upgrades • Parameters : None. S Example : LOADRMP (Puts unit into loader mode.) l_ikh=çìí=Ääåâ • Descripti ...

  • Barco 16x16 - page 79

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 69 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä MatrixPRO Remote Comma nds mpq^q • Description : Displays preset i nformation (i.e. preset valid, w hich input video/ audio # routed, audio level, etc). • Parameters : out Preset number; [1 - 16] S Examples : PST A T 1 (Displays pr ...

  • Barco 16x16 - page 80

    70 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä MatrixPRO Remote Commands oqbjm=çìí=áå • Description : Routes input to output. If the out put is in a group, all the o utputs in the group will be routed to the input specif ied. If the output is in a I/O group but the input is ...

  • Barco 16x16 - page 81

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 71 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä MatrixPRO Remote Comma nds q^hb=Éå • Description : Cancel / Route all pending video/audio routes. • Parameters : en Mode; [0|1], Cancel a ll pending|Route al l pending. S Example : T AKE 1 (Activates all pending video routes.) rk ...

  • Barco 16x16 - page 82

    72 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä MatrixPRO Remote Commands ...

  • Barco 16x16 - page 83

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 73 `K==` çåí ~Å í=fåÑ çê ã~íáçå få=qÜáë=^ééÉåÇáñ The following topics are discu ssed in this Appendix: • Barco Folsom W arranty • Return Material Au thorization (RMA) • Barco Events Cont act In for mation _~êÅç=cçäëçã=t~êê~åíó All video pro ...

  • Barco 16x16 - page 84

    74 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e `K==`çåí~Åí=fåÑçêã~íáçå Barco Events Contact Information _~êÅç=bîÉåíë=`çåí~Åí=fåÑçêã~íáçå Barco Events USA/Barco Folsom, LLC • 1 1 1 01 Trade Center Drive Rancho Cordova, California 95670 USA • Phone: (916) 859-250 0 • Fax: (916) 859-2515 ...

  • Barco 16x16 - page 85

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 75 fåÇÉ ñ kìãÉê áÅë 16x16 HD-SDI . . . . . . . . . . . . . . . . . . . . . . . . . . 5 16x16 SD-SDI . . . . . . . . . . . . . . . . . . . . . . . . . . 5 8x8 HD-SDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 ^ About MatrixPRO . . . . . . . . . . . . . . . . ...

  • Barco 16x16 - page 86

    76 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e Index Double-cursor . . . . . . . . . . . . . . . . . . . . . . . . . 19 Downloading files, software upgrade . . . . . . . . 51 b Encore Presentation S ystem . . . . . . . . . . . . . . . 5 Equipment marking terms . . . . . . . . . . . . . . . . . . . . . . . v setup . . . . . . ...

  • Barco 16x16 - page 87

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 77 Index Installed version of software . . . . . . . . . . . . . . 24 Introduction to Matrix PRO . . . . . . . . . . . . . . . . . 1 IP address default . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 IPCONFIG ...

  • Barco 16x16 - page 88

    78 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e Index Reclockers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Reclocking Control Menu . . . . . . . . . . . . . . . . . 25 Remote commands, MatrixPRO . . . . . . . . . . . . . . 65 connections . . . . . . . . . . . . . . . . . . . . . . . 61 Ethernet setup . . . . ...

  • Barco 16x16 - page 89

    MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guide 79 Index setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 video switching . . . . . . . . . . . . . . . . . . . . . 37 T AKE button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 serial command . . . . . . . . . . . . . . . . . . . . 71 T ake . . . . . . ...

  • Barco 16x16 - page 90

    80 MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User ’ s Guid e Index ...

Fabricant Barco Catégorie Network Router

Les documents que nous recevons du fabricant de l'appareilBarco 16x16 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Barco
- manuels d’utilisations 16x16
- fiches produit Barco
- dépliants
- ou étiquettes-énergie Barco 16x16
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Barco 16x16.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Barco 16x16, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Barco 16x16. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Barco 16x16.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Barco 16x16, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Barco 16x16 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Barco 16x16.

Le manuel d’utilisation complet Barco, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Barco 16x16 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Barco 16x16, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lBarco 16x16 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Barco 16x16 - qui devraient nous aider dans les premières étapes lors de l'utilisation Barco 16x16
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Barco 16x16
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Barco 16x16 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Barco 16x16?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Barco 16x16, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Barco 16x16 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)