Manuel d’utilisation Canon CR-DA1

11 pages 0.25 mb
Télécharger

Aller à la page of 11

Summary
  • Canon CR-DA1 - page 1

    Canon Des Adapter CR-DA1 Operation Manual Before using the instrument, be sure to read this manual thoroughly. Also, read the Non-Mydriatic Retinal Camera's Operation Manual. Keep the manual where it is easily accessible. For sales, service, and support: Richard J Kinch, PhD http://www.truetex.com/ Palm Beach County, Florida USA +1 (561) 966-8 ...

  • Canon CR-DA1 - page 2

    PLEASE NOTE 1. In no event will Canon be liable for direct or indirect consequential damage arising out of the use of this product. 2. The CR-DA 1 system has been approved by UL and GM with the EOS 030 digital camera powered by a battery. If you wish to instead use AC power to operate the digital camera, please consult Canon representative or distr ...

  • Canon CR-DA1 - page 3

    CONTENTS 1. Outline............................................................................ 1 2. Notes for Using the Instrument.............................. 1 3. Description 2 4. Photography 3 5. Installation 5 6. Before Calling a Service Person 7 7. Specifications 8 8. Components 8 ...

  • Canon CR-DA1 - page 4

    1. Outline The Canon DCS (Digital Camera System) Adapter CR-DAI is for converting the size of the image taken with our Non-Mydriatic Retinal Camera CR6-45NMlCR6-45NMf into a size to allow the image to be taken with a Canon's EOS digital camera. Please contact Canon representative or distributor for installation, preparation and adjustment of t ...

  • Canon CR-DA1 - page 5

    3. Description CD Retinal camera mount This mount is for attaching the adapter to the retinal camera. ® Lock release button This button releases the adapter from the retinal camera. ® Digital camera mount This mount is for attaching the digital camera to the adapter. r-----G) @ Strobe timing signal cable Connected to the digital camera, the adapt ...

  • Canon CR-DA1 - page 6

    4. Photography Operation of the retinal camera in the system using this adapter is basically the same as in the general retinal photography. Please also refer to the manuals of the CR6-45NM1CR6-45NMf and the digital camera. NOTE: FCD (Flash Compensation by Diopter) does not operate in the photography using this adapter. Also, fluorescent photograph ...

  • Canon CR-DA1 - page 7

    Flash intensity can be changed in 11 steps (increments: 1/3 steps). DA 1 DA2 DA3 DA4 DA5 DA6 DA7 DA8 DA9 DA10 DA 11 Equival- ent to Dark E08 ~ Bright - ~ D30 180400 (3) After changing the setting, press the switch under "RTN". Now the changed flash intensity is valid. Step 3 Setting the digital camera By referring to the manual of the dig ...

  • Canon CR-DA1 - page 8

    5. Installation & WARNING Be sure to turn OFF the power of respective equipments before connecting or disconnecting the cables. Also, do not handle them with wet hands. Step 1 Attaching the adapter to the retinal camera (I) Remove the cap from the retinal camera mount on the adapter. (2) Remove the brush from the accessory blow brush of the ret ...

  • Canon CR-DA1 - page 9

    Step 2 Attaching the digital camera to the adapter (1) Remove the caps from the lens mount on the ~ digital camera and from the digital camera mount on the adapter. (2) Align the guide mark on the adapter and the lens attachment mark on the digital camera. (3) Rotate the digital camera in clockwise direction until a click is heard. (4) When removin ...

  • Canon CR-DA1 - page 10

    Step 3 Connecting the signal cables (1) Connect the strobe timing signal cable to the PC terminal for flash syncronization on the side of the digital camera. Rotate the screw on the connector of the cable in clockwise direction to lock the cable. Rotate the screw in counterclockwise direction when disconnecting the cable. (2) Connect the release si ...

  • Canon CR-DA1 - page 11

    7. Specifications Attachable digital cameras: Mounts: Magnification: Dimensions: Mass: Canon digital camera (such as EOS D30) Retinal camera side: Canon EF mount Digital camera side: Canon EF mount 22 (on 35mm film surface) : 17 (on imaging element) ~ 85 x 70mm Approx. 0.5 kg 8. Components Adapter 1 -8- ...

Fabricant Canon Catégorie Welding System

Les documents que nous recevons du fabricant de l'appareilCanon CR-DA1 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Canon
- manuels d’utilisations CR-DA1
- fiches produit Canon
- dépliants
- ou étiquettes-énergie Canon CR-DA1
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Canon CR-DA1.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Canon CR-DA1, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Canon CR-DA1. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Canon CR-DA1.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Canon CR-DA1, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Canon CR-DA1 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Canon CR-DA1.

Le manuel d’utilisation complet Canon, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Canon CR-DA1 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Canon CR-DA1, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lCanon CR-DA1 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Canon CR-DA1 - qui devraient nous aider dans les premières étapes lors de l'utilisation Canon CR-DA1
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Canon CR-DA1
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Canon CR-DA1 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Canon CR-DA1?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Canon CR-DA1, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Canon CR-DA1 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)