Manuel d’utilisation Barco DP2000/2500

44 pages 0.51 mb
Télécharger

Aller à la page of 44

Summary
  • Barco DP2000/2500 - page 1

    DP2000/2500 Network Printing Setup Guide ...

  • Barco DP2000/2500 - page 2

    30/05/02 Document Systems Support V1.0  2 Disclaimer Whilst every care has been ta ken in producing this guid e, however, it’s accuracy cannot be guaranteed. If you do find an y errors or omissions please email your comments to document.support@panasonic.co.uk . Panasonic Business Systems do not accept an y responsibility for any loss, disrupt ...

  • Barco DP2000/2500 - page 3

    30/05/02 Document Systems Support V1.0  3 Index Page Topic 4 Introduction 5 Peer to Peer printing in Windows 95/98/Me 9 Peer to Peer printing in Windows NT4/2000 15 Server Set-Up in Windows NT4/2000 21 Client Set-Up for Server based printing in Windows 95/98/Me/NT4/2000 27 Printer Driver Overview (GDI) 29 Driver Overview (PCL6) 30 Network Glossa ...

  • Barco DP2000/2500 - page 4

    30/05/02 Document Systems Support V1.0  4 Introduction The network interface card in the DP series works only wi th the TCP/IP protocol (the same protocol used by the In t e r n e t ) . T h i s p r o t o c o l m u s t b e l o a d e d o n y o u r d e s k t o p PC and/or Server for ne twork printing to work. If you are not currently runn ing this ...

  • Barco DP2000/2500 - page 5

    30/05/02 Document Systems Support V1.0  5 Windows 95/98/Me Peer to Peer Printing Y o u c a n p r i n t t o y o u r D P s e r i e s u n i t f r om the above operating systems without the need of a Server. You can also use this meth od of printing even if you have a Server but would prefer to print directly to your DP unit. Stage 1 What you will n ...

  • Barco DP2000/2500 - page 6

    30/05/02 Document Systems Support V1.0  6 Stage 2 What Next? Now you have programmed your DP unit you now need to install the printer d river on your PC. Follow these instructions to add the DP unit as a printe r. You will need the CD-ROM that came with your DP unit. T his contains the printer driver and the program that’s needed to enable pee ...

  • Barco DP2000/2500 - page 7

    30/05/02 Document Systems Support V1.0  7 18. We now need to conf igure the driver to work with your DP unit. You will only need to do this once. 19. Click on “device options” 20. Select the accessories you ha ve fitted t o your DP unit. 21. Click on “paper/layout” and make s ure the default is set to A4 22. Now go to th e details tab 23 ...

  • Barco DP2000/2500 - page 8

    30/05/02 Document Systems Support V1.0  8 27. Enter the TCP/IP address of th e copier then type a colon : and then lp (lowercase no spaces). Just li ke in the example shown below: 28. Now click on the “general” tab and choose “print a test page” 29. The DP unit should produce a standard test page confirming that everything has been set u ...

  • Barco DP2000/2500 - page 9

    30/05/02 Document Systems Support V1.0  9 7. If you do have a green “link light”, try to “ping” the networ k card in the copier by typing the foll owing from a DOS prom pt on your PC: Ping 192.168.10.1 (Please substitute the IP address wi th the correct address you are using) 8. If you get a “reply” then you have a network connection ...

  • Barco DP2000/2500 - page 10

    30/05/02 Document Systems Support V1.0  10 Windows NT4/2000 Peer to Peer Printing Y o u c a n p r i n t t o y o u r D P s e r i e s u n i t f r om the above operating systems without the need of a Server. You can also use this meth od of printing even if you have a Server but would prefer to print directly to your DP unit. You may need to have A ...

  • Barco DP2000/2500 - page 11

    30/05/02 Document Systems Support V1.0  11 10. In case of difficulty your Dealer can te st the unit using an engineering mode, please ask them for assistance. Stage 2 What Next? Now you have programmed your DP unit you now need to install the printer d river on your PC. Follow these instructions to add the DP unit as a printe r. You will need th ...

  • Barco DP2000/2500 - page 12

    30/05/02 Document Systems Support V1.0  12 17. In the top window where it says name or address of se rver providing LPD, enter the IP address of the copier separated by a dot 18. In the bottom window enter “lp” for the queue name. 19. Click “OK” 20. NT will now go and look for this port so make sure the copier is switched on and connecte ...

  • Barco DP2000/2500 - page 13

    30/05/02 Document Systems Support V1.0  13 28. Now choose if you wish to share this printer with other users. We recommend that you do not share the pr inter; if other users wish to print to the copier, repeat this procedure for each PC. 29. Click “Next”. 30. Click “Yes” to produce a test page. 31. Click “Finish”. 32. A test page sho ...

  • Barco DP2000/2500 - page 14

    30/05/02 Document Systems Support V1.0  14 47. This now starts another wizard. 48. Click “Next” 49. Now enter the IP address of th e copier separated by a dot. 50. Click “Next” 51. On the next menu choose ”Custom” and click on “Settings” 52. On this menu make sure the protocol selected is “LPR ” and the queue name should be s ...

  • Barco DP2000/2500 - page 15

    30/05/02 Document Systems Support V1.0  15 53. Click “Next” 54. The wizard will now display your chosen settings, click “Finish” to save. 55. You should now have an icon in your printer folder, do a right hand mouse click over the icon and select “Printing preferences”. 56. Make sure the paper is set to A4. 57. You can alter other de ...

  • Barco DP2000/2500 - page 16

    30/05/02 Document Systems Support V1.0  16 Problems? No Network Connection 1. Check the obvious things; is the unit sw itched on and “on-lin e” (the on-line light should b e on, if it isn’t press the “Printer” key on th e left side of the copier dashboard and then press “on-line”. The copier sh ould bleep to confirm. 2. Check the c ...

  • Barco DP2000/2500 - page 17

    30/05/02 Document Systems Support V1.0  17 Windows NT4/2000 Server Based Printing – Server Set-Up Important Note In order for you to proceed wi th this installation you will need “Administrator Rights” on the Server. Please co nsult with your Network Administrator if you nee d assistance. Stage 1 What you will need Your DP unit will need a ...

  • Barco DP2000/2500 - page 18

    30/05/02 Document Systems Support V1.0  18 8. You can check to see if your settings have been accepted by go ing back into the menu’s previously menti oned. 9. In case of difficulty your Dealer can te st the unit using an engineering mode, please ask them for assistance. Stage 2 What Next? Now you have programmed your DP unit you now need to i ...

  • Barco DP2000/2500 - page 19

    30/05/02 Document Systems Support V1.0  19 11. In the top window where is says name or address of server providing LPD, enter the IP address of the copier separated by a dot 12. In the bottom window enter “lp” for the queue name. 13. Click “OK” 14. NT will now go and look for this port so make sure the copier is switched on and connected ...

  • Barco DP2000/2500 - page 20

    30/05/02 Document Systems Support V1.0  20 22. Choose to share this printer wit h othe r users and also highlight any other operating systems you wish to have drivers loaded for e.g. Windows 95. NT will prompt you for the location of the ad ditional driver files at a later stage. 23. Click “Next”. 24. Click “Yes” to produce a test page. ...

  • Barco DP2000/2500 - page 21

    30/05/02 Document Systems Support V1.0  21 42. Click “Next” 43. Now enter the IP address of th e copier separated by a dot. 44. Click “Next” 45. On the next menu choose ”Custom” and click on “Settings” 46. On this menu make sure the protocol selected is “LPR ” and the queue name should be set to “lp”. Als o tick the bo x ...

  • Barco DP2000/2500 - page 22

    30/05/02 Document Systems Support V1.0  22 47. Click “Next” 48. The wizard will now display your chosen settings, click “Finish” to save. 49. You should now have an icon in your printer folder, do a right hand mouse click over the icon and select “Printing preferences”. 50. Make sure the paper is set to A4. 51. You can alter other de ...

  • Barco DP2000/2500 - page 23

    30/05/02 Document Systems Support V1.0  23 Problems? No Network Connection 1. Check the obvious things; is the unit sw itched on and “on-lin e” (the on-line light should b e on, if it isn’t press the “Printer” key on th e left side of the copier dashboard and then press “on-line”. The copier sh ould bleep to confirm. 2. Check the c ...

  • Barco DP2000/2500 - page 24

    30/05/02 Document Systems Support V1.0  24 Windows 95/98/Me/NT4/2000 Server Based Printing – Client PC’s Important Note Before proceeding, please ma ke sure that the printer dr iver has been installed onto your Server. For instru ctions on h ow to do this, see the approp riate section for your Server operating system. Stage 1 1. From your PC ...

  • Barco DP2000/2500 - page 25

    30/05/02 Document Systems Support V1.0  25 NT4 and 2000 only 9. Repeat the right hand mous e click over the printer ic on and go to “Document defaults” and make sure the paper size is set to A4 then click “OK”. Also check the Port settings of your computer to ma ke sure that “enable byte counting” is switched on.. Operating Instructi ...

  • Barco DP2000/2500 - page 26

    30/05/02 Document Systems Support V1.0  26 Print Driver Issues 10. If the copier “bleep’s” and doesn’t prin t anything, check the defaults of the printer driver especially the default pape r size. Make sure th is is set to A4. 11. Have you got “security prin t” enabled? Again, double -check the defaults and make sure the driver is co ...

  • Barco DP2000/2500 - page 27

    30/05/02 Document Systems Support V1.0  27 GDI Printer Driver Overview Windows 95/98/Me/NT4/2000 Paper Source Selection Zoom N into 1 feature Auto Paper Size Detection ...

  • Barco DP2000/2500 - page 28

    30/05/02 Document Systems Support V1.0  28 Sort and Duplex Menu’s Output Tray Selection Security Print Option + Unit Configuration ...

  • Barco DP2000/2500 - page 29

    30/05/02 Document Systems Support V1.0  29 PCL6 Printer Driver Overview Windows 95/98/Me/NT4/2000 Paper Source Selection Enlarge/Reduce Option Combine Pages onto 1 Page ...

  • Barco DP2000/2500 - page 30

    30/05/02 Document Systems Support V1.0  30 Output Tray Selection + Staple Feature (requires finisher) Sort and Duplex Menu’s Image Overlay (10 per user) ...

  • Barco DP2000/2500 - page 31

    30/05/02 Document Systems Support V1.0  31 Network Glossary AC15: A type of connection used to transmit data or voice across long distances, used to provide WAN connections from site to site. BACKBONE: A high capacity network linking networks of a lower capacity, like LAN's BRIDGE: A device linking 2 LANs or LAN segments passing traffi c ov ...

  • Barco DP2000/2500 - page 32

    30/05/02 Document Systems Support V1.0  32 CLOSED USER GROUP: (CUG) A subgroup of users on a network who can connect and communicate with each other. One or more members of the CUG can have access to the wider network. Co-Axial Cable aka co-ax: This is a cable consisting of an inne r core and an outer braid separated by a layer of insulation. CO ...

  • Barco DP2000/2500 - page 33

    30/05/02 Document Systems Support V1.0  33 ETHERNET: This is the most widely used fo rm of LAN transmission. (IEEE 802.3 standard). It is based on a BUS TOPO LOGY and runs over twisted pair, co- ax or fibre-optics. There are a number of variants to ETHERNET, common ones are: nn BASE x , where nn is the speed, in, Mbits/s and x is the medium used ...

  • Barco DP2000/2500 - page 34

    30/05/02 Document Systems Support V1.0  34 HTML: (H ypertext M ark-up L anguage) This is the common language for encoding documents for inclusion on the WWW (World Wide Web). HTML nota tion is interpreted by browser software in order to display the desired document. HTTP: (H ypertext T ransfer P rotocol) A form of communication language us ed by ...

  • Barco DP2000/2500 - page 35

    30/05/02 Document Systems Support V1.0  35 MAC: (M edia A ccess C ontrol) MESHED NEWTORK: A network in which every node is connected to every other node. MODEM: (Mo dulator - Dem odulator) A device which converts digital signals to analogue signals suitable for transmission onto an analogue network. MULTIPLEXER: A piece of equipment which enable ...

  • Barco DP2000/2500 - page 36

    30/05/02 Document Systems Support V1.0  36 NODE: A node is any point on a networ k where the transmission paths are interconnected. On a LAN, a node will usually be a workstation or client, on a WAN, a node could be a whole site normally connected via routers and private connections. NOS: (N etwork Operating S ystem) The operating system that ru ...

  • Barco DP2000/2500 - page 37

    30/05/02 Document Systems Support V1.0  37 REPEATER(S): An amplifier that extends the standard length of cable in a transmission path, it compensates for distortion and signal attenuation. RING TOPOLOGY: A type of network where the workstat ions are connected, via repeaters in one single uni-directional loop. See TABLE 1 RIP: (R outing I nformat ...

  • Barco DP2000/2500 - page 38

    30/05/02 Document Systems Support V1.0  38 STAR TOPOLOGY: A type of network in which all the nodes are connected to a central hub, which functions as a multiplexer and switching node. See TABLE 1 SWITCHED NETWORK: This is a type of network that ca n be shared among many users, each of them being able to communicate with each other. SYNCHRONIOUS ...

  • Barco DP2000/2500 - page 39

    30/05/02 Document Systems Support V1.0  39 TOKEN PASSING: This is a method of controlling a ccess to a network using a special data packet called a TOKEN from node to no de. When all the stations are idle, the TOKEN is labelled as ' free '. A station wishing to transmit data waits for a ' free ' TOKEN, then changes the token ...

  • Barco DP2000/2500 - page 40

    30/05/02 Document Systems Support V1.0  40 UTP: (U nshielded Twisted P air) A type of cable using, us ually 8, coloured wires twisted in pairs but has no shielding against RF noise. WAN: (W ide A rea N etwork) A connection, or series of connections or other LAN's that are located in different locations, even different co untries, but act as ...

  • Barco DP2000/2500 - page 41

    30/05/02 Document Systems Support V1.0  41 NOTES ...

  • Barco DP2000/2500 - page 42

    30/05/02 Document Systems Support V1.0  42 NOTES ...

  • Barco DP2000/2500 - page 43

    30/05/02 Document Systems Support V1.0  43 NOTES ...

  • Barco DP2000/2500 - page 44

    30/05/02 Document Systems Support V1.0  44 ...

Fabricant Barco Catégorie Network Card

Les documents que nous recevons du fabricant de l'appareilBarco DP2000/2500 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Barco
- manuels d’utilisations DP2000/2500
- fiches produit Barco
- dépliants
- ou étiquettes-énergie Barco DP2000/2500
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Barco DP2000/2500.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Barco DP2000/2500, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Barco DP2000/2500. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Barco DP2000/2500.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Barco DP2000/2500, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Barco DP2000/2500 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Barco DP2000/2500.

Le manuel d’utilisation complet Barco, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Barco DP2000/2500 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Barco DP2000/2500, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lBarco DP2000/2500 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Barco DP2000/2500 - qui devraient nous aider dans les premières étapes lors de l'utilisation Barco DP2000/2500
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Barco DP2000/2500
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Barco DP2000/2500 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Barco DP2000/2500?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Barco DP2000/2500, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Barco DP2000/2500 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)