Manuel d’utilisation Barco 26-0501000-00

186 pages 0.76 mb
Télécharger

Aller à la page of 186

Summary
  • Barco 26-0501000-00 - page 1

    rëÉêÛë=dìáÇÉ ibaJm ol • Manual # 26-0501 000-00 • Revision B qj ...

  • Barco 26-0501000-00 - page 2

    ii LED-PRO • User ’s Guide ibaJmol=  =rëÉêÛë=dìáÇÉ `çéóêáÖÜí © Barco, Inc. May 1, 2006 All rights reserved. No p art of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a r etrieval system without the prior written consent of Barco. kçíáÅÉ Barco provide ...

  • Barco 26-0501000-00 - page 3

    LED-PRO • User ’ s Guide iii agreed upon in the contract, al l guarantee claims of the purchase r will be rendered invalid. Not included in the guarantee coverage are syste m failures which are attributed to programs or special electron ic circuitry provided by the purchaser , e.g. interfaces. Normal wear as well as normal maintenance are not s ...

  • Barco 26-0501000-00 - page 4

    iv LED-PRO • User ’s Guide léÉê~íçêë=p~ÑÉíó=pìãã~êó The general safety informa tion in this summary is for operating personnel. aç=kçí=oÉãçîÉ=`çîÉêë=çê=m~åÉäë There are no user-service able part s within the unit. Removal of the top cover will expose dangerous voltages. T o avoid personal injury , do not remov ...

  • Barco 26-0501000-00 - page 5

    LED-PRO • User ’ s Guide v qÉêãë=få=qÜáë=j~åì~ä=~åÇ=bèìáéãÉåí=j~êâáåÖ= t^okfkd Highlights an operating procedure, practice, condit ion, statement, etc., which, if not strictly observed, could result in injury to or death of personnel. `^rqflk The exclamation point within an equilateral triangle is intended to alert the ...

  • Barco 26-0501000-00 - page 6

    vi LED-PRO • User ’s Guide `Ü~åÖÉ=eáëíçêó The table below lists the changes to the LED-PRO User ’s Guide. T able 0-1. Change History Rev Date ECO # Description Approved By A 8/1/05 1478 Release Jim Wickenhiser B 5/1/06 1620 Change summary: • Added new features including Setup Wizard, Input Wizard, diagonal test pattern scrolling a ...

  • Barco 26-0501000-00 - page 7

    LED-PRO • User ’ s Guide vii q~ÄäÉ=çÑ=`çåíÉåíë `Ü~éíÉê=N fåíêçÇìÅíáçå =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K= N In This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Chapter Structure . . . . . . . . . . . . . ...

  • Barco 26-0501000-00 - page 8

    viii LED-PRO • User ’s Guide Table of Contents Bootup with a Stored LOG O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Quick Setup and Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Menu Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Barco 26-0501000-00 - page 9

    LED-PRO • User ’ s Guide ix Table of Conte nts Input Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Sampling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Timing Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Barco 26-0501000-00 - page 10

    x LED-PRO • User ’s Guide Table of Contents Pan & Zoom Menu Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Pan H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Pan V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Zoom . . . . . . . ...

  • Barco 26-0501000-00 - page 11

    LED-PRO • User ’ s Guide xi Table of Conte nts Serial Upgrade Method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 ^ééÉåÇáñ=^= péÉÅáÑáÅ~íáçåëK=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K NNT In This Appendix . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Barco 26-0501000-00 - page 12

    xii LED-PRO • User ’s Guide Table of Contents ICSP in mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 ICUSE in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 IEDGE in edge nnnn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 IGM in n . . . . . . . . . . . . . . . ...

  • Barco 26-0501000-00 - page 13

    LED-PRO • User ’ s Guide xiii Table of Conte nts EFVFP nn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 EFVSYNC nn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 EFVRATE nnn.n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 EFSAV . . . . . . . . . . . . . . . . . ...

  • Barco 26-0501000-00 - page 14

    xiv LED-PRO • User ’s Guide Table of Contents ...

  • Barco 26-0501000-00 - page 15

    LED-PRO • User ’ s Guide 1 N K==fåíê çÇìÅ íáçå få=qÜáë=`Ü~éíÉê This chapter is designed to introduce you to the LED-PRO™ User ’s Guide. Areas to be covered are: • Chapter Structure • How to Use This G uide • Conventions • About the LED-PRO • Features • What’ s New in Firmware V ersion 2.0 • Connectivity D ...

  • Barco 26-0501000-00 - page 16

    2 LED-PRO • User ’s Guide NK==fåíêçÇìÅíáçå Chapter Structure `Ü~éíÉê=píêìÅíìêÉ The following chapte rs provide instructions for all aspects of LED-PRO operations: • Chapter 1, “ Introduction ” provides a system overview , a list of features, and a system connectivity diagram. • Chapter 2, “ Hardware Orient atio ...

  • Barco 26-0501000-00 - page 17

    LED-PRO • User ’ s Guide 3 NK==fåíêçÇìÅíáçå How to Use This Guide eçï=íç=rëÉ=qÜáë=dìáÇÉ Following are important tips for streamlining your use of this User’s Guide in its electronic “PDF” form. k~îáÖ~íáåÖ Use Acrobat Reader ’s “bookmarks” to navigate to the desired location. All chapter files have the ...

  • Barco 26-0501000-00 - page 18

    4 LED-PRO • User ’s Guide NK==fåíêçÇìÅíáçå About the LED-PRO ^Äçìí=íÜÉ=ibaJmol The LED-PRO is a powerful all-in-one signal processor that accepts a wide range of video input signals, and processes the m to drive Barco LED displays. The LED-PRO allows you to scale visual sources and mi x them in multiple ways while stil l maint ...

  • Barco 26-0501000-00 - page 19

    LED-PRO • User ’ s Guide 5 NK==fåíêçÇìÅíáçå Features • 60 independent input configura tion memory presets. • Low video delay (3 input field s max., 20 lines min.) • Logo image captu re and recall. • Dissolve to/from stored logo. tÜ~íÛë=kÉï=áå=cáêãï~êÉ=sÉêëáçå=OKM This section lists the new fea tures that h ...

  • Barco 26-0501000-00 - page 20

    6 LED-PRO • User ’s Guide NK==fåíêçÇìÅíáçå Features • T est Pattern — Diagonal Scrollin g Mode This new feature enables users to enable “diagonal scrolling” of any selected test pattern. In Chapter 4, refer to the “ Using the T est Pattern Menu ” section on page 93 for details. • LED Menu This improved menu p rovides ac ...

  • Barco 26-0501000-00 - page 21

    LED-PRO • User ’ s Guide 7 NK==fåíêçÇìÅíáçå Connectivity Diagram `çååÉÅíáîáíó=aá~Öê~ã The figure below provides a samp le connectivity diagram: Figure 1-1. LED-PRO System Diagram (sample) Please note the fol lowing points regarding the diagram: • The maximum of four inputs are shown, one each in RGB, DVI, Composite a ...

  • Barco 26-0501000-00 - page 22

    8 LED-PRO • User ’s Guide NK==fåíêçÇìÅíáçå Application Questions ^ééäáÅ~íáçå=nìÉëíáçåë At Barco, we take pride in offering unique solutions to demanding technical problems. If you have appli cation questions, require further information or would like to discuss your application require ments in more detail, please ca ...

  • Barco 26-0501000-00 - page 23

    LED-PRO • User ’ s Guide 9 O K = = e ~ êÇ ï~ êÉ = l êá Éå í~ í á ç å få=qÜáë=`Ü~éíÉê This chapter provides detailed diagrams of the system’s front and rear pa nels. The following topics are discussed: • LED-PRO Front Panel • LED-PRO Rear Panel ...

  • Barco 26-0501000-00 - page 24

    10 LED-PRO • User ’s Guide 2. Hardware Orientation LED-PRO Front Panel ibaJmol=cêçåí=m~åÉä The figure below illustra tes the LED-PRO front p anel: Figure 2-1. LED-PRO Front Panel Following are descriptions of each front panel section: 1) Display Section The Display Section includes the display , the ADJUST knob and two “menu navigation ...

  • Barco 26-0501000-00 - page 25

    LED-PRO • User ’ s Guide 11 2. Hardware Orientation LED-PRO Front Pan el aáëéä~ó=pÉÅíáçå The figure below illustra tes the Display Section : Figure 2-2. Display Section Descriptions of each button and con trol are provided below: • The Menu D isplay is a 4 line x 20 character V acuum Fluorescent Display (VFD) that shows all LED-PRO ...

  • Barco 26-0501000-00 - page 26

    12 LED-PRO • User ’s Guide 2. Hardware Orientation LED-PRO Front Panel jÉåì=hÉóë=pÉÅíáçå The figure below illustra tes the Menu Keys Section : Figure 2-4. Menu Keys Section Descriptions of each button and con trol are provided below: • SETUP — press to access the top level of the Setup Menu , which enables you to perform complet ...

  • Barco 26-0501000-00 - page 27

    LED-PRO • User ’ s Guide 13 2. Hardware Orientation LED-PRO Front Pan el fåéìíë=pÉÅíáçå The figure below illustra tes the Input s Section : Figure 2-5. Inputs Section Descriptions of each button and con trol are provided below: • 1 — selects universal input 1 (the rear panel DVI connector) as the L ED wall’s source. When presse ...

  • Barco 26-0501000-00 - page 28

    14 LED-PRO • User ’s Guide 2. Hardware Orientation LED-PRO Front Panel ^Äçìí=íÜÉ=ildl The LOGO butto n can be thought of as an additional input video source which can be selected and transitioned in the normal manner . The button allows you to capture a still frame from any input ( 1 , 2 , 3 or SD/HD ), and store that image in flash memo ...

  • Barco 26-0501000-00 - page 29

    LED-PRO • User ’ s Guide 15 2. Hardware Orientation LED-PRO Rear Pan el ibaJmol=oÉ~ê=m~åÉä The figure below illustra tes the LED-PRO rear panel: Figure 2-1. LED-PRO Rear Panel Following are descriptions of each rear panel connector: 1) Universal Input 1 T wo DVI-I connectors a re provided for Universal Input 1 — one for the input and the ...

  • Barco 26-0501000-00 - page 30

    16 LED-PRO • User ’s Guide 2. Hardware Orientation LED-PRO Rear Panel 3) Universal Input 3 Five BNC connectors are provided for Universal Input 3 — each with a buf fered loop-through. The input correspo nds to Button 3 in the Inputs Section , and accepts RGB, YUV , S-Video (Y/C), or composite (NTSC, P AL or SECAM) signals. ~ In Appendix A, re ...

  • Barco 26-0501000-00 - page 31

    LED-PRO • User ’ s Guide 17 PK==fåëí ~ää~íáçå få=qÜáë=`Ü~éíÉê This chapter provides d etailed instructions for installing the L ED-PRO hardware. The following topics are discussed: • Safety Precautions • Unpacking and Inspection • Site Prep aration • Cable and Adapter Information • Rack-Mount Installation • Power I ...

  • Barco 26-0501000-00 - page 32

    18 LED-PRO • User ’s Guide 3. Installation Safety Precautions p~ÑÉíó=mêÉÅ~ìíáçåë= For all LED-PRO in stallation procedures, observe the following important safety and handling rules to avoid damage to yourself and the equipment: • T o protect users from electric shock, ensure that the power supplies for ea ch unit connect to eart ...

  • Barco 26-0501000-00 - page 33

    LED-PRO • User ’ s Guide 19 3. Installation Rack-Mount Installation o~ÅâJjçìåí=fåëí~ää~íáçå LED-PRO units are designed to be rack mou nted and are supplied with front rack-mount hardware. Please note the following important points: • Rear rack-mount brackets are available as a kit, and are recommended for use when units are mou ...

  • Barco 26-0501000-00 - page 34

    20 LED-PRO • User ’s Guide 3. Installation Power Installation mçïÉê=`çêÇLiáåÉ=sçäí~ÖÉ=pÉäÉÅíáçå LED-PRO is rated to operate with the following supplies: • Input Power: 100-240 V AC, 47-63 Hz • Power Consumption: 150 watts maximu m LED-PRO performs line voltage selection automatical ly , and no user controls are requir ...

  • Barco 26-0501000-00 - page 35

    LED-PRO • User ’ s Guide 21 3. Installation Signal Installation páÖå~ä=fåëí~ää~íáçå The figure below illustrates a sample LED-PRO system diagram. Use this figure for reference during the signal installation process. Figure 3-2. LED-PRO System Diagram (sample)  Use the following steps to install signals to/from the LED-PRO: 1. Co ...

  • Barco 26-0501000-00 - page 36

    22 LED-PRO • User ’s Guide 3. Installation Signal Installation ~ If you are using RS-232 communications, connect th e laptop to LED- PRO’s RS-232 Port . ~ If you are using Ethernet communicatio ns, a totally “local” network is recommended, without IP connections to the out side world: • Use a crossover Ethernet cable for a direct connec ...

  • Barco 26-0501000-00 - page 37

    LED-PRO • User ’ s Guide 23 3. Installation Format Connection Table cçêã~í=`çååÉÅíáçå=q~ÄäÉ Use the following table to connect various source formats to LED-PRO, using the system’s universal input connectors in conjunction with a customer supplied VGA to 5 x BNC breakout cable. Please note: • RGB format — typical devices: ...

  • Barco 26-0501000-00 - page 38

    24 LED-PRO • User ’s Guide 3. Installation Format Connection Table ...

  • Barco 26-0501000-00 - page 39

    LED-PRO • User ’ s Guide 25 QK==léÉê ~íáçå få=qÜáë=`Ü~éíÉê This chapter provides co mprehensive menu descriptions and detailed o perating instructions for the LED-PRO. The following topics are discussed: • Control Overview • Power-Up Initialization • Quick Setup and Operations • Menu T ree • Using the Menu System • Q ...

  • Barco 26-0501000-00 - page 40

    26 LED-PRO • User ’s Guide 4. Operation Control Overview `çåíêçä=lîÉêîáÉï There are several ways to control the LED-PRO: • The front panel is available for status and control using the display , the ADJUST knob and the two menu “navigati on” buttons ( SEL and ESC ). In conjunction with other dedicated buttons, these controls ...

  • Barco 26-0501000-00 - page 41

    LED-PRO • User ’ s Guide 27 4. Operation Power-Up I nitializ ation • Initializati on Screen 3 displays the software ve rsion that is currently being loaded. Note that the software version chan ges as upgrades are released. Figure 4-3. Initialization Scr een 3 At the conclusion of the boot-up procedure, the Input 1 button will light and the St ...

  • Barco 26-0501000-00 - page 42

    28 LED-PRO • User ’s Guide 4. Operation Power-Up Initialization During this process, the following message is sh own: Figure 4-6. Initialization Screen — Set IP Address At the conclusion of the boot-up procedure, the Input 1 button will light and the Sta tu s Menu is shown. _ççíìé=ïáíÜ=~=píçêÉÇ=ildl During your last session, if ...

  • Barco 26-0501000-00 - page 43

    LED-PRO • User ’ s Guide 29 4. Operation Quick Setup and Operations nìáÅâ=pÉíìé=~åÇ=léÉê~íáçåë For the optimum speed in system setup and operations, use the following steps . 1. Run the Setup Wizard . Refer to the “ Using the Setup Wi zard ” section on page 56 for instructions. 2. Run the Input Wizard . Refer to the “ Us ...

  • Barco 26-0501000-00 - page 44

    30 LED-PRO • User ’s Guide 4. Operation Menu Tree jÉåì=qêÉÉ The figure below illustra tes a simplified view of the LED-PRO Menu T ree . Use this diagram for reference throughout this chapter . Please note: • In the diagram, only “top level” menus are shown. • The symbol >> denotes additional sub-menus. • In the sections de ...

  • Barco 26-0501000-00 - page 45

    LED-PRO • User ’ s Guide 31 4. Operation Using the Menu System rëáåÖ=íÜÉ=jÉåì=póëíÉã This section lists the rules and conventions for using LED-PRO’s menu system. The figure below illustrates a sample menu: Figure 4-9. T est Pattern Menu (sample) Please note the following important rules and conventions: • Pressing any of the ...

  • Barco 26-0501000-00 - page 46

    32 LED-PRO • User ’s Guide 4. Operation Using the Menu System • T o navigate back up the menu structure, press ESC . Each press takes you back up the menu tree by one level. • The SEL button is also used to answer “ Ye s ” to cert ain menu queries. The ESC button is also used to answer “ No ” to cert ain menu queries. Note The displ ...

  • Barco 26-0501000-00 - page 47

    LED-PRO • User ’ s Guide 33 4. Operation Quick Function Reference nìáÅâ=cìåÅíáçå=oÉÑÉêÉåÅÉ Use the following table to quickly access the proper menu for a specific function. Both hyperlinks and page numb ers are provided. T able 4-1. LED-PRO Quick Function Refere nce T able How to : Use the Foll owing: Page Adjust 1:1 timing ...

  • Barco 26-0501000-00 - page 48

    34 LED-PRO • User ’s Guide 4. Operation Quick Function Reference Enable or disable the LED boost mode Boost Mode 103 Enable or disable the LED creative mode Creative Mode 103 Enable or disable the LED OSD (on screen display) LED OSD 102 Enable or disable the LED tile mode Tile Mode 103 Enable or disable the raster box Raster Box 94 Get informat ...

  • Barco 26-0501000-00 - page 49

    LED-PRO • User ’ s Guide 35 4. Operation Quick Function Reference Set LED wall control to local or remote LED Control 82 Set minimum delay Minimum Delay 83 Set the display mode to crop or scale Display Mode 76 Set the input’s aspect ratio Aspect Ratio 76 Set the RS-232 baud rate RS232 51 V erify if LOGO is present in memory Logo Present 86 Zo ...

  • Barco 26-0501000-00 - page 50

    36 LED-PRO • User ’s Guide 4. Operation Using the Status Menu rëáåÖ=íÜÉ=pí~íìë=jÉåì The figure below illustra tes a sample St at us M enu : Figure 4-10. S tatus Menu (sample) The Status Me nu is a “standalone” menu without any sub-menus. In add ition, the “cursor” does not appea r . • St atu s Menu Access • St atu s Me ...

  • Barco 26-0501000-00 - page 51

    LED-PRO • User ’ s Guide 37 4. Operation Using the Status Menu pí~íìë=jÉåì=aÉëÅêáéíáçå The Stat us Me nu provides information about the currently selected system input (a s determined by the input buttons) and the selected output. If the input is changed , the fields change accordingly . Other pertinent changes that you make wi ...

  • Barco 26-0501000-00 - page 52

    38 LED-PRO • User ’s Guide 4. Operation Using the Status Menu lock has not been reestablished, the display changes to " Lost Input ," and the source field remains unchanged. • <wall status> Indicates the status of the Barco LED wall that is currently connected to LED- PRO. Choices include: ~ No W all detected — no Barco LED ...

  • Barco 26-0501000-00 - page 53

    LED-PRO • User ’ s Guide 39 4. Operation Using the Setu p Menu rëáåÖ=íÜÉ=pÉíìé=jÉåì The following topics are discu ssed in this section: • Setup Menu T ree • Setup Menu Descr iption • Programming EDID • Using the Setup Wizard • Using the Input Wizard • Using the Expert Mode Menu ...

  • Barco 26-0501000-00 - page 54

    40 LED-PRO • User ’s Guide 4. Operation Using the Setup Menu pÉíìé=jÉåì=qêÉÉ Press SET UP to access the Setup Menu . The figure be low illustrates a simplified menu tree. The symbol >> denotes additional sub-menus. The menu trees for the Setup Wizar d , Input Wi zard and Expert Mode are provided in their respective sections. Fig ...

  • Barco 26-0501000-00 - page 55

    LED-PRO • User ’ s Guide 41 4. Operation Using the Setu p Menu pÉíìé=jÉåì=aÉëÅêáéíáçå The Setup Menu enables you to set up all LED-PRO input, output and system parameters. If desired, all setup information can be store d in non-volatile memory (using the “ Save System St ate ” function). On ce saved, all settings will be au ...

  • Barco 26-0501000-00 - page 56

    42 LED-PRO • User ’s Guide 4. Operation Using the Setup Menu pÉíìé=táò~êÇ From the Setup Menu , select Setup Wizard to display the Setup Wizard Start Menu which enables you to quickly and con veniently configure an LED wall along with the system’s output. Figure 4-14. Setup Wizard St art Menu Refer to the “ Using the Setup Wizard ? ...

  • Barco 26-0501000-00 - page 57

    LED-PRO • User ’ s Guide 43 4. Operation Using the Setu p Menu pçìêÅÉ=^äáÖåãÉåí=Ô=^å~äçÖ From the Setup Menu (for an analog input source), select Source Al ignment to display the Analog Source Alignment Men u . This menu enables you to adjust all aspects of the source’s “visible” parameters. Figure 4-16. Analog Source Al ...

  • Barco 26-0501000-00 - page 58

    44 LED-PRO • User ’s Guide 4. Operation Using the Setup Menu _êáÖÜíåÉëë From the Analog Source Alignme nt Menu , select Brightness to adjust the overall brightness of the selected analog input. • The adjustment range is 75.0% to 125.0%. • 100% is the defa ult setting. oÉÇ=`çåíê~ëí From the Analog So urce Alignment Menu , se ...

  • Barco 26-0501000-00 - page 59

    LED-PRO • User ’ s Guide 45 4. Operation Using the Setu p Menu pÜ~êéåÉëë From the Analog Source Alignme nt Menu , select Sharpness to adjust the sharpness of the selected input. This selection sets the scaler's sharpening (or softening) value. • The sharpening ran ge extends from -10 (softest) to +10 (sharpest). • 0 is the defau ...

  • Barco 26-0501000-00 - page 60

    46 LED-PRO • User ’s Guide 4. Operation Using the Setup Menu pçìêÅÉ=^äáÖåãÉåí=Ô=paf From the Setup Menu (for an SD-SDI or HD-SDI input source), select Source Alignment to display the SDI Source Alignm ent Menu . This menu enables you to adjust all aspects of the source’s “visible” pa rameters. Figure 4-17. SDI Source Alignme ...

  • Barco 26-0501000-00 - page 61

    LED-PRO • User ’ s Guide 47 4. Operation Using the Setu p Menu p~íìê~íáçå From the SDI Source Alignment Menu , select Saturation to adjust the saturation of the selected input. • The adjustment range is -75 to +125. • 100 is the defa ult setting. pÜ~êéåÉëë From the SDI Source Alignment Menu , select Sharpness to adjust the sha ...

  • Barco 26-0501000-00 - page 62

    48 LED-PRO • User ’s Guide 4. Operation Using the Setup Menu pçìêÅÉ=^äáÖåãÉåí=Ô=asf From the Setup Menu (for a DVI input source), select Source Alignment to display the DVI Source Alignment Menu . This menu enables you to adjust all aspects of the source’ s “visible” parameters. Figure 4-18. DVI Source Alignment Menu (sample ...

  • Barco 26-0501000-00 - page 63

    LED-PRO • User ’ s Guide 49 4. Operation Using the Setu p Menu mêÉëÉíë From the Setup Menu , select Presets to display the Global Preset Menu , which enables you to store, recall or delete up to 16 Presets (or "V iews"). Each Preset is essentially a “global” combination of pan and zoom settings which can be applied to any in ...

  • Barco 26-0501000-00 - page 64

    50 LED-PRO • User ’s Guide 4. Operation Using the Setup Menu 3. Scroll to the Recall line and press SEL . The global Preset is recal led and applied to the selected input. p~îÉ From the Global Preset Menu , select Save to display the Save Preset Menu , which enables you to save the current pan and zoom settings using one of 15 predefined name ...

  • Barco 26-0501000-00 - page 65

    LED-PRO • User ’ s Guide 51 4. Operation Using the Setu p Menu opOPO From the Setup Menu , select RS232 to display the RS232 Menu , which en ables you to set the baud rate for the rear panel RS-2 32 connector . Figure 4-23. RS232 Menu (sample)  T o set the RS-232 connector ’s baud rate: 1. On the Ba ud line, press SEL . The navigation curs ...

  • Barco 26-0501000-00 - page 66

    52 LED-PRO • User ’s Guide 4. Operation Using the Setup Menu  T o save the system state: 1. Select the input button (in the front p anel Inputs Section ) th at you want to be acquired and selected at power-u p. 2. Press SETUP to display the Setup Menu . 3. Select the Save System St ate line and press SEL . The “ Saving System S tate ” me ...

  • Barco 26-0501000-00 - page 67

    LED-PRO • User ’ s Guide 53 4. Operation Using the Setu p Menu mêçÖê~ããáåÖ=bafa The EDID DVI Input Format Menu enables yo u to update LED-PRO's preferred EDID resolution. The menu can be accessed from several poin ts within the menu tree, but all programming procedures are ide ntical. EDID (Extended Display Identification Data) is ...

  • Barco 26-0501000-00 - page 68

    54 LED-PRO • User ’s Guide 4. Operation Using the Setup Menu 5. Scroll to the Program EDID line and press SEL . The following warning message is shown: Figure 4-26. EDID Warning Message ~ Press SEL to proceed with the non-volatile memory programming. ~ Press ESC key to cancel the operation. As an additional precaution, LED-PRO ve rifies that no ...

  • Barco 26-0501000-00 - page 69

    LED-PRO • User ’ s Guide 55 4. Operation Using the Setu p Menu If this error message persists and there is no DVI source or display device connected to LED-PRO, plea se contact Barco customer service. In Appendix C, refer to the “ Contact Information ” section on page 162 for det ails. 6. If programming is successfu l, the following message ...

  • Barco 26-0501000-00 - page 70

    56 LED-PRO • User ’s Guide 4. Operation Using the Setup Wizard rëáåÖ=íÜÉ=pÉíìé=táò~êÇ The Setup Wizard allows users to quickly set up and align a basic LED display — without the need of the Director T oolset. The Wizard automatically guides the user through the entire setup process, including: • W all detection (type and size ...

  • Barco 26-0501000-00 - page 71

    LED-PRO • User ’ s Guide 57 4. Operation Using the Setup Wizard 3. Press SEL to launch the wizard and display the Setup Wizard St art Messa ge . Figure 4-32. Setup Wizard St art Message 4. Press SEL to continue. During this interval, LED-PRO will detect the tiles, query the tiles and count the number of tiles. The larger the LED wall, th e long ...

  • Barco 26-0501000-00 - page 72

    58 LED-PRO • User ’s Guide 4. Operation Using the Setup Wizard ~ If the system detects “creative” LED tiles, such as MiSPHERE and MiPIX, the message “ Tile type not supported ” will appear . Because these tile types are not supported by the Wizard, please use Director T oolset for setu p. 6. From the W all Information Menu , select Next ...

  • Barco 26-0501000-00 - page 73

    LED-PRO • User ’ s Guide 59 4. Operation Using the Setup Wizard 8. From the Set W all Dim ensions Menu , the W all Data Co nnection Menu appears. Figure 4-36. Wall Dat a Connection Menu ~ Select Horizontally if cables are connected horizon t ally . ~ Select V ertically if cables are connected vertically . ~ Select Previous to return to the pre ...

  • Barco 26-0501000-00 - page 74

    60 LED-PRO • User ’s Guide 4. Operation Using the Setup Wizard The figure below illustra tes the Rolling Grid T est Menu . Figure 4-38. Rolling Grid T est Menu ~ Select Y es if the grid test pattern rolls smoothly through the picture. Please continue with step 11 . ~ Select No if the grid does not roll smoothly through the picture. In this case ...

  • Barco 26-0501000-00 - page 75

    LED-PRO • User ’ s Guide 61 4. Operation Using the Setup Wizard 12. Select Next to display the Input T ype Menu : Figure 4-40. Input T y pe Menu (sample) ~ Select PA L if your primary inputs are P AL. ~ Select NTSC/PC if your primary inputs are NTSC or a PC. This completes the Setup Wiza rd procedure. 13. Select Next to save the new output conf ...

  • Barco 26-0501000-00 - page 76

    62 LED-PRO • User ’s Guide 4. Operation Using the Input Wi zard rëáåÖ=íÜÉ=fåéìí=táò~êÇ The Input Wizard allows users to easily setup and align in put sources. It automatically detects and re-scales the selected input sour ce to match the physical size of the LED display .  Use the following steps to run the Input Wizard : 1. P ...

  • Barco 26-0501000-00 - page 77

    LED-PRO • User ’ s Guide 63 4. Operation Using the Input Wi zard 5. After selecting the desired input, select Next to display the Position & Size Menu . Figure 4-44. Position and Size Menu (sample ) ~ Select H Position and adjust the input to fill the raster box precisely . ~ Select H Size and adjust the input to fill the ra ster box precis ...

  • Barco 26-0501000-00 - page 78

    64 LED-PRO • User ’s Guide 4. Operation Using the Input Wi zard Please note the fol lowing important points regarding the gamma curve: ~ If you previously selected (and stored) a custom gamma curve with th e Director T oolset , LED-PRO will query the tiles and recognize the curve as “custom.” ~ If you have used the “ Expert Mode ” to se ...

  • Barco 26-0501000-00 - page 79

    LED-PRO • User ’ s Guide 65 4. Operation Using the Input Wi zard 9. When the Setup Another Input Query is shown: ~ Select Ye s to return to the Select Input Menu . Repeat steps 4 through 8 for each additional inpu t. ~ Select No to exit the wizard, and return to the Statu s M enu . After you exit, the system performs an automatic “ Save Syste ...

  • Barco 26-0501000-00 - page 80

    66 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu rëáåÖ=íÜÉ=bñéÉêí=jçÇÉ=jÉåì The following topics are discu ssed in this section: • Expert Mode Menu T ree • Expert Mode Menu Description bñéÉêí=jçÇÉ=jÉåì=qêÉÉ From the Setup Menu , select Exper t Mode to display the Expert Mode Menu . The figur ...

  • Barco 26-0501000-00 - page 81

    LED-PRO • User ’ s Guide 67 4. Operation Using the Expert Mode Menu bñéÉêí=jçÇÉ=jÉåì=aÉëÅêáéíáçå The Expert Mode Menu provides extensive “advanced” system setup functions. A sample menu is shown belo w . Figure 4-50. Expert Mode Menu (sample) Following are descriptions of each menu function: • Input • Output • Eff ...

  • Barco 26-0501000-00 - page 82

    68 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu fåéìí From the Expert Mode Menu , select Input to display the Input Setup Menu for the selected source. A sample menu is shown below . Figure 4-51. Input Setup Menu (sample) Following are descriptions of each menu function: • Input Format • Sampling • Tim ing Ad ju st ...

  • Barco 26-0501000-00 - page 83

    LED-PRO • User ’ s Guide 69 4. Operation Using the Expert Mode Menu fåéìí=cçêã~í On the Input Setup Menu , the top “ Input Format ” line indicates the current inp ut video format in the following form: Hact x Vact @ Vr Hz S 1024x768 @75 Hz Please note: • If the currently selected input does not have a valid input signal, th e mess ...

  • Barco 26-0501000-00 - page 84

    70 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu Please note: • The 1:1 mode requires very accura te settings, as even a small sampling error can cause noise on the output image. • Both the sample clock freque ncy and phase must be correct to obt ain a properly sampled image. • LED-PRO incorporates automatic adju stment ...

  • Barco 26-0501000-00 - page 85

    LED-PRO • User ’ s Guide 71 4. Operation Using the Expert Mode Menu • Sample Phase — enables you to fine-tune the image by adjustin g the sample clock phase. Please note: ~ The adjustment range is -16 to 15 . ~ Zero is the defa ult setting. ~ The value is initially filled in by th e Auto Config command, or set to the default. • H T ot al ...

  • Barco 26-0501000-00 - page 86

    72 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu qóéÉ From the I nput Setup Menu , select Ty p e to choose amon g the possible signal types available at the current input channel. Please note: • V alues are: RGB, YPbPr , NTSC/P AL/SECAM, SDI, and DVI. • When “ In Auto Acquire ” is enabl ed, the “type” selections ...

  • Barco 26-0501000-00 - page 87

    LED-PRO • User ’ s Guide 73 4. Operation Using the Expert Mode Menu The figure below illustra tes the Custom Input Format s Menu : Figure 4-54. Custom Input Formats Menu (sample) Following are descriptions of each menu function: • Custom Format — enables you to select a cust om format. The choices consist of the formats within the standard ...

  • Barco 26-0501000-00 - page 88

    74 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu • If the selected filename has ne ver been used, the message " Format Saved " appears. • If the selected filename is already in use, the Overwrite Custom Format Menu appears. Figure 4-56. Overwrite Custom Format Menu (sample) – Press SEL to overwrite the file. ? ...

  • Barco 26-0501000-00 - page 89

    LED-PRO • User ’ s Guide 75 4. Operation Using the Expert Mode Menu ~ If the selected format is the current input format in use, or the input format currently saved in an input configura tion, the “ Input Format In Use ” message will be shown. Press ESC to continue. • H T ot al — enables you to adjust (in pixel s) the total pixel count ...

  • Barco 26-0501000-00 - page 90

    76 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu ^ëéÉÅí=o~íáç From the I nput Setup Menu , select Aspect Ratio to display the Input Aspect Ratio Menu . This menu enables you to set the input source’s aspect ratio to a predefined or custom ratio. LED-PRO selects and displays the source’s aspect ratio according to th ...

  • Barco 26-0501000-00 - page 91

    LED-PRO • User ’ s Guide 77 4. Operation Using the Expert Mode Menu mêçÅÉëëáåÖ From the I nput Setup Menu , select Processing to display the Processing Menu wh ich enables you to adjust a variety of image processing parameters. Figure 4-60. Processing Menu (sample) Following are descriptions of each menu function: • Sync Sel — this ...

  • Barco 26-0501000-00 - page 92

    78 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu ~ When LED-PRO detects Macrovision copy protection on the incoming YPbPr NTSC/P AL video, the value is automatically repositioned to 60mV to account for the reduced amplitude sync pulse. p~îÉ=`çåÑáÖ From the I nput Setup Menu , select Save Config to display the Save Confi ...

  • Barco 26-0501000-00 - page 93

    LED-PRO • User ’ s Guide 79 4. Operation Using the Expert Mode Menu aÉäÉíÉ=`çåÑáÖ From the I nput Setup Menu , select Delete Config to display the Delete Config Menu , which enables you to delete an y input configurations that we re previously saved. Figure 4-61. Delete Config Menu (sample)  T o delete an input configuration : 1. S ...

  • Barco 26-0501000-00 - page 94

    80 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu lìíéìí From the Expert Mode Menu , select Output to display the LED Output Menu which enables you to configure the LED-PRO output. Figure 4-63. LED Output Menu Following are descriptions of each menu function: • Tim ing Ad ju st • Refresh Rate • LED Control • LED St ...

  • Barco 26-0501000-00 - page 95

    LED-PRO • User ’ s Guide 81 4. Operation Using the Expert Mode Menu qáãáåÖ=^Çàìëí From the LED Output Menu , select Timi ng Adj us t to display the Output Timing Adj ust Menu , which enables you to make adjustments to the currently selecte d output format’s timing parameters. A sample menu is shown below . Figure 4-64. Output Timing ...

  • Barco 26-0501000-00 - page 96

    82 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu iba=`çåíêçä From the LED O utput Menu , select LED Control to choose whether the Barco L ED wall is controlled by LED-PRO or by an external application such as Director T oolset . • When set to Remote , the Director T oolset GUI has full control of the RS-232 port and ca ...

  • Barco 26-0501000-00 - page 97

    LED-PRO • User ’ s Guide 83 4. Operation Using the Expert Mode Menu içÅâ=íç=pçìêÅÉ From the LED Output Menu , select Lock to Source to display the Lock T o Source Menu , which enables you to set “lock to source” parameters: Figure 4-65. Lock to Source Menu In order to elimina te video processing delay associated with frame rate co ...

  • Barco 26-0501000-00 - page 98

    84 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu • Enable the “minimum delay” mo de when an another image p rocessor (such as an Encore or ScreenPRO-II) is used to process the video and create multiple windows. The external processor then feeds LED-PRO in a progressive 800x600 format. In this case, LED-PRO does not ne ed ...

  • Barco 26-0501000-00 - page 99

    LED-PRO • User ’ s Guide 85 4. Operation Using the Expert Mode Menu bÑÑÉÅíë From the Expert Mode Menu , select Eff ects to display the Effects Menu which enables you to select the transition effect that is used when switching between inp ut channels. Figure 4-68. Effects Menu (s ample) Following are descriptions of each menu function: • ...

  • Barco 26-0501000-00 - page 100

    86 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu içÖç From the Expert Mode Menu , select Eff ects to display the Logo Menu , which enables you to save and delete a LOGO. LED-PRO stores one logo in non-volatil e memory . Figure 4-69. Logo Menu Following are descriptions of each menu function: • Capture Logo • Delete Logo ...

  • Barco 26-0501000-00 - page 101

    LED-PRO • User ’ s Guide 87 4. Operation Using the Expert Mode Menu få=^ìíç=^ÅèìáêÉ From the Expert Mode Menu , scr oll to the In Auto Acquire function to en able or disable the automatic input acquisition (a uto-acquire) function. Press SEL , use the knob to select the desired mode, then press SEL to accept. • On — in this (defau ...

  • Barco 26-0501000-00 - page 102

    88 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu póëíÉã From the Expert Mode Menu , select System to display the System Me nu , which enables you to adjust a variety of system parameters, such as th e display brightness, Ethernet an d Diagnostic RS-232 settings, and panel lock. Figure 4-70. System Menu (sample) Following ...

  • Barco 26-0501000-00 - page 103

    LED-PRO • User ’ s Guide 89 4. Operation Using the Expert Mode Menu Following are descriptions of all menu functions: • Baud — selects the baud rate. V alues are: 1200, 2400, 9600, 19 200, 38400. • Parameters — select from the following values: N81, E71, O71, E72, O72. • Handshaking — select from the following valu es: Off or On (CT ...

  • Barco 26-0501000-00 - page 104

    90 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu • Set St atic IP — select the Set St atic IP function to di splay the SET IP Menu . This menu enables you to manually set a subnet mast, gateway , and static IP address when a DHCP server is not available. The menu is only accessible when DHCP is Off . Figure 4-73. Set IP Me ...

  • Barco 26-0501000-00 - page 105

    LED-PRO • User ’ s Guide 91 4. Operation Using the Expert Mode Menu  T o communicate with LED-PRO via Ethernet: a. Ensure that all Ethernet setup is complete b. On a Microsoft ® Windows ® PC, open a command prompt window and type the following and press ENTER : > telnet xxx.xxx.xxx.xxx 10001 ... where xxx.xxx.xxx.xxx is the IP address a ...

  • Barco 26-0501000-00 - page 106

    92 LED-PRO • User ’s Guide 4. Operation Using the Expert Mode Menu  T o unlock the panel via the command line interface: 1. Use the LOCKOUT command. In Appendix B, refer to the “ LOCKOUT ” section on page 156 for details. p~îÉ=póëíÉã=pí~íÉ On the System Me nu , scroll to the Save System State function and press SEL to save all ...

  • Barco 26-0501000-00 - page 107

    LED-PRO • User ’ s Guide 93 4. Operation Using the Test Pattern Menu rëáåÖ=íÜÉ=qÉëí=m~ííÉêå=jÉåì The following topics are discu ssed in this section • T est Pattern Menu T ree • T est Pattern Menu Description qÉëí=m~ííÉêå=jÉåì=qêÉÉ Press TEST P A T to access the T est Pattern Menu . The figure below illustrat ...

  • Barco 26-0501000-00 - page 108

    94 LED-PRO • User ’s Guide 4. Operation Using the Test Pattern Menu qóéÉ On the T est Pattern Menu , select th e Ty p e field to enable or disable a test pattern. Choices are: • Off • H Ramp • V Ramp • 100% Col Bars • 75% Col bars • 16x16 Grid • 32x32 Grid • Burst • 50% Gray • Gray S teps 1 • Gray S teps 2 • White • ...

  • Barco 26-0501000-00 - page 109

    LED-PRO • User ’ s Guide 95 4. Operation Using the Pan & Zoom Menu rëáåÖ=íÜÉ=m~å=C=wççã=jÉåì The following topics are discu ssed in this section • Pan & Zoom Menu T ree • Pan & Zoom Menu Description m~å=C=wççã=jÉåì=qêÉÉ Press P AN & ZOOM to access the Pan & Zoom Menu . The figure below illustrates ...

  • Barco 26-0501000-00 - page 110

    96 LED-PRO • User ’s Guide 4. Operation Using the Pan & Zoom Menu m~å=C=wççã=jÉåì=aÉëÅêáéíáçå The Pan & Zoom Menu allows you to pan, tilt and zoom a selected inp ut, and save the results in a local “Preset” — an internal file held in non-volatile memory for the specific input only . For example, you can define a p ...

  • Barco 26-0501000-00 - page 111

    LED-PRO • User ’ s Guide 97 4. Operation Using the Pan & Zoom Menu • 0% means that the center of the input image coincides with th e center of the output image. • A positive value moves the image downward. • The screen updates when SEL is pressed. wççã On the Pan & Zoom menu, select Zoom to zoom the selected input in and out. ? ...

  • Barco 26-0501000-00 - page 112

    98 LED-PRO • User ’s Guide 4. Operation Using the L ED Menu rëáåÖ=íÜÉ=iba=jÉåì The following topics are discu ssed in this section • LED Menu T ree • LED Menu Description iba=jÉåì=qêÉÉ Press LED to access the LED Menu . The figure below il lustrates the complete menu tree — including sub-menus. Figure 4-81. LED Menu Tree L ...

  • Barco 26-0501000-00 - page 113

    LED-PRO • User ’ s Guide 99 4. Operation Using the LED Me nu iba=jÉåì=aÉëÅêáéíáçå The LED Menu allows you to adjust variety of parameters for the LED wall itself. Many LED parameters are identical to those found in th e Output Setup Menus with in the Expert Mode Menu — and placed here for you r convenience. A sample menu is shown ...

  • Barco 26-0501000-00 - page 114

    100 LED-PRO • User ’s Guide 4. Operation Using the L ED Menu iba=`çåíêçä From the LED Menu , select LED Control to choose whether the Barco LED wall is controlled by LED-PRO or by an external application such as Director T oolset . • When set to Remote , the Director T oolset GUI has full control of the serial port and can communicate w ...

  • Barco 26-0501000-00 - page 115

    LED-PRO • User ’ s Guide 101 4. Operation Using the LED Me nu iba=fåÑçêã~íáçå From the LED Menu , select LE D Information to display the LED Information Menu , which displays data about the LED wall and fib er communications (if utilized). All menu items are “read only ,” and can not be adjusted. Figure 4-83. LED Information Menu ( ...

  • Barco 26-0501000-00 - page 116

    102 LED-PRO • User ’s Guide 4. Operation Using the L ED Menu cáÄÉê=qñ=fa The Fiber T x field lists the ID of the Fiberlink T ransmitter . cáÄÉê=oñ=fa The Fiber R x field lists the ID of the Fiberlink Receiver . iba=qÉëí=m~ííÉêå From the LED Menu , select LED T est Pattern to display the Wa ll T est Pattern Menu . This menu all ...

  • Barco 26-0501000-00 - page 117

    LED-PRO • User ’ s Guide 103 4. Operation Using the LED Me nu Following are descriptions of each menu function. • Stat us • Ty p e pí~íìë The Stat us field ena bles or disables the LED on-screen display . qóéÉ The Ty p e field enables you to select various types of on-screen displa ys, such as mode, tile number , te mperature, etc. _ ...

  • Barco 26-0501000-00 - page 118

    104 LED-PRO • User ’s Guide 4. Operation Using the L ED Menu opOPO From the LED Menu , select RS232 to display the RS2 32 Menu , which enables you to set the RS-232 baud rate for the Serial port — not the Diagnost ic port. The Serial port is used for communications with th e Director T oolset. Figure 4-86. RS232 Menu (sample) • Select the B ...

  • Barco 26-0501000-00 - page 119

    LED-PRO • User ’ s Guide 105 4. Operation Using the Input Position Menu rëáåÖ=íÜÉ=fåéìí=mçëáíáçå=jÉåì The following topics are discu ssed in this section • Input Position Menu T ree • Input Position Menu Description fåéìí=mçëáíáçå=jÉåì=qêÉÉ Press INPUT POS to access the Input Position Menu . The figure ...

  • Barco 26-0501000-00 - page 120

    106 LED-PRO • User ’s Guide 4. Operation Using the Input Position Menu fåéìí=mçëáíáçå=jÉåì=aÉëÅêáéíáçå The Input Position Menu allows you to perform an abbrevia ted set of input setup functions, for operator convenience . For a complete set of input setup functions, use the Input Setup Menu in the Expert Mode ( SETUP > ...

  • Barco 26-0501000-00 - page 121

    LED-PRO • User ’ s Guide 107 4. Operation Using the Input Position Menu s=mçëáíáçå On the Input Position Menu , select V Position to adjust (in lines) the start of the input video's active area from V sync. s=páòÉ On the Input Position Menu , select V Size to adjust (in lines) the size of the acti ve area. p~îÉ=`çåÑáÖ From ...

  • Barco 26-0501000-00 - page 122

    108 LED-PRO • User ’s Guide 4. Operation Using the Input Position Menu 5. T o save the input configuration under the selected filename, scroll to the Save Config line and press SEL . ~ If the selected filename has never been used, the message " Config Saved " appears. ~ If the filename is already in use, the Overw rite File Menu appea ...

  • Barco 26-0501000-00 - page 123

    LED-PRO • User ’ s Guide 109 4. Operation Using the Input Position Menu oÉÅ~ää=`çåÑáÖ From the Input Position Menu , select Recall Con fig to display the Recall Config Menu , which enables you to recall input configurations that were previously saved for the currently selected input format and type. Figure 4-91. Recall Config Menu (sam ...

  • Barco 26-0501000-00 - page 124

    11 0 LED-PRO • User ’s Guide 4. Operation Using the Input Position Menu ...

  • Barco 26-0501000-00 - page 125

    LED-PRO • User ’ s Guide 111 RK==réÖê ~ÇáåÖ=p çÑí ï ~ê É få=qÜáë=`Ü~éíÉê This chapter provides detailed instructions for upgrading LED-PRO system software. The following topics are discussed: • Software Upgrade Overview • Hardware Requirements • Software Requirement s • Downloading Software • Serial Upgrade Metho ...

  • Barco 26-0501000-00 - page 126

    11 2 LED-PRO • User ’s Guide 5. Upgrading Software Software Upgrade Overview pçÑíï~êÉ=réÖê~ÇÉ=lîÉêîáÉï Firmware files for the LED-PRO system are loaded into the hardware at power-up. These files are stored in the unit’s onboard flash memory , which can be upgra ded using a serial connection to a PC (or laptop). The PC connec ...

  • Barco 26-0501000-00 - page 127

    LED-PRO • User ’ s Guide 11 3 5. Upgrading Software Downloading Software açïåäç~ÇáåÖ=pçÑíï~êÉ T wo different methods can be used to download LED-PRO software and the Flash File Loader utility: • Via FTP Site • Via We b S it e sá~=cqm=páíÉ Barco Folsom's FTP site address is: ftp.folsom .com  T o download from the F ...

  • Barco 26-0501000-00 - page 128

    11 4 LED-PRO • User ’s Guide 5. Upgrading Software Serial Upgrade Metho d pÉêá~ä=réÖê~ÇÉ=jÉíÜçÇ  Use the following steps to upgrade LED-PRO software using a serial connecti on to your PC: 1. With the download complete, navig ate to the target folder and double-click the EXE to launch the installation shield. 2. Follow the promp ...

  • Barco 26-0501000-00 - page 129

    LED-PRO • User ’ s Guide 11 5 5. Upgrading Software Serial Upgrade Me thod • TXD and RXD should be green. The y will flash if Enter is pressed. Figure 5-2. Flash Loader St atus Lights, Normal Condition c. Press Enter a few times to display the system prompt “ # ” on screen. d. If the prompt does not appear , conti nue with step 9 (trouble ...

  • Barco 26-0501000-00 - page 130

    11 6 LED-PRO • User ’s Guide 5. Upgrading Software Serial Upgrade Metho d 14. On LED-PRO, perform a factory reset. Press SETUP , select Factory Reset , and then confirm. In Chapter 4, refer to the “ Factory Reset ” section on page 52 for additional details. 15. On LED-PRO, verify that the new software has been loade d correctly . Press SETU ...

  • Barco 26-0501000-00 - page 131

    LED-PRO • User ’ s Guide 11 7 ^K==péÉÅáÑáÅ~íáçåë få=qÜáë=^ééÉåÇáñ This appendix provides detailed technica l specifications for the LED-PRO. The following topics are discussed: • Input Specifications • Output Specificatio ns • User Control Specifications • Physical and Electric al Specifications • Communications ...

  • Barco 26-0501000-00 - page 132

    11 8 LED-PRO • User ’s Guide ^K==péÉÅáÑáÅ~íáçåë Input Specifications fåéìí=péÉÅáÑáÅ~íáçåë= The table below lists LED-PRO input specifications. * All buffered loop-through connectors, 75 Ohm ou tput impedance T able A-1. LED-PRO Input S pecifications Parameter Det ail Specification Video Input Universal Inputs (3) hig ...

  • Barco 26-0501000-00 - page 133

    LED-PRO • User ’ s Guide 11 9 ^K==péÉÅáÑáÅ~íáçåë Output Specifi cations lìíéìí=péÉÅáÑáÅ~íáçåë The table below lists LED-PRO output specificatio ns. rëÉê=`çåíêçä=péÉÅáÑáÅ~íáçåë The table below lists LED-PRO user control specificati ons. mÜóëáÅ~ä=~åÇ=bäÉÅíêáÅ~ä=péÉÅáÑáÅ~íá ...

  • Barco 26-0501000-00 - page 134

    120 LED-PRO • User ’s Guide ^K==péÉÅáÑáÅ~íáçåë Communications Specifications `çããìåáÅ~íáçåë=péÉÅáÑáÅ~íáçåë= The table below lists LED-PRO communications specifications. * 1 15k Baud recommended for LED tile firmware upload onl y . * 19.2k Baud recommended for normal operation, such as Director T oolset. ^ÖÉ ...

  • Barco 26-0501000-00 - page 135

    LED-PRO • User ’ s Guide 121 ^K==péÉÅáÑáÅ~íáçåë Pinouts máåçìíë= The following topics are discu ssed in this section: • Analog 15-pin D Connector • DVI-I Connector Pinout s • Ethernet Connector • Serial and Diagnostic Connector ^å~äçÖ=NRJéáå=a=`çååÉÅíçê The figure below illustra tes the analog 15-pin D c ...

  • Barco 26-0501000-00 - page 136

    122 LED-PRO • User ’s Guide ^K==péÉÅáÑáÅ~íáçåë Pinouts asfJf=`çååÉÅíçê=máåçìíë The figure below illustra tes the DVI-I connector: Figure A-2. DVI-I Connector The table below lists DVI-I Connector pinouts. Please note: • T .M.D.S = T ransition Mini mized Differential Signal • DDC = Display Data Channel T able A-8. D ...

  • Barco 26-0501000-00 - page 137

    LED-PRO • User ’ s Guide 123 ^K==péÉÅáÑáÅ~íáçåë Pinouts bíÜÉêåÉí=`çååÉÅíçê The figure below illustra tes the Ethernet connector: Figure A-3. Ethernet Connector The table below lists Ethernet connector pinouts. T able A-9. Ethernet Connector Pinouts Pin Signal Wire Color 1 TX Data + White / Orange 2 TX Data - Orange 3 ...

  • Barco 26-0501000-00 - page 138

    124 LED-PRO • User ’s Guide ^K==péÉÅáÑáÅ~íáçåë Pinouts pÉêá~ä=~åÇ=aá~ÖåçëíáÅ=`çååÉÅíçê The figure below illustra tes the Serial and Diagnostic connector: Figure A-4. Serial and Diagnostic Connector The table below lists Serial and Diagnostic connector pinouts. T able A-10. Serial and Diagnost ic Connector Pinou ...

  • Barco 26-0501000-00 - page 139

    LED-PRO • User ’ s Guide 125 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä få=qÜáë=^ééÉåÇáñ This appendix provides information regarding exte rnal remote control protocol. The following topics are discussed: • Default Serial Parameters • Default IP Address • RS-232 Mode • LED-PRO Remote Commands ...

  • Barco 26-0501000-00 - page 140

    126 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä Default Serial Parameters aÉÑ~ìäí=pÉêá~ä=m~ê~ãÉíÉêë Default serial communications parameters are provided for the following two ports: • Diagnostics Port • RS-232 Port Please note: • The system returns to these values after a factory reset. • These ...

  • Barco 26-0501000-00 - page 141

    LED-PRO • User ’ s Guide 127 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä Default IP Address aÉÑ~ìäí=fm=^ÇÇêÉëë The LED-PRO default IP address is 192.1 68.000.200 . Please note: • The system returns to this value af ter a factory reset. • This default address can be changed using the menu system. In Chapter 4, refer to the “ E ...

  • Barco 26-0501000-00 - page 142

    128 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands ibaJmol=oÉãçíÉ=`çãã~åÇë The tables below list LED-PRO remote commands. Click the hyperlink for detailed descriptions and examples, or go directly to the page as listed. All remote commands are sorted by category . • Resolution Remote C ...

  • Barco 26-0501000-00 - page 143

    LED-PRO • User ’ s Guide 129 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds IAR in n cn Adjust Input Aspect Ratio 136 IAR? in Query Input Aspect Ratio 136 IAUTOC Automatically Configure the Input 137 IBRT in nnn.n Set Input Brightness 137 IBRT? in Query Input Brightness 137 ICNT in nnn.n Set Input Contrast 137 ICNT? in Q ...

  • Barco 26-0501000-00 - page 144

    130 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands IRCNT in c nnn.n Set RGB Input Contrast 142 IRCNT? in c Query RGB Input Contrast 142 ISA T in nnn Adjust Input Saturation 142 ISA T? in Query Input Saturation 142 ISMP in n Adjust Input Sample mode 142 ISMP? in Query Input Sample mode 143 ISYNC in ...

  • Barco 26-0501000-00 - page 145

    LED-PRO • User ’ s Guide 131 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds lìíéìí=oÉãçíÉ=`çãã~åÇë The table below lists LED-PRO output remote commands. T able B-4. LED-PRO Output Remote Commands Command Description Page LCKMODE mode ty pe Set Lock T o Source Mode and T ype 145 LCKMODE? Query Lock T o Sou ...

  • Barco 26-0501000-00 - page 146

    132 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands `ìëíçã=cçêã~í=oÉãçíÉ=`çãã~åÇë The table below lists LED-PRO custom format remote commands. T able B-5. LED-PRO Custom Format Remote Commands Command Description Page EFLIST List all saved custom formats 150 EFRES nn Set base res ...

  • Barco 26-0501000-00 - page 147

    LED-PRO • User ’ s Guide 133 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds póëíÉã=~åÇ=bíÜÉêåÉí=oÉãçíÉ=`çãã~åÇë The table below lists LED-PRO system and Ethernet remote commands. içÖç=oÉãçíÉ=`çãã~åÇë The table below lists LED-PRO Logo remote comman ds. T able B-6. LED-PRO System and ...

  • Barco 26-0501000-00 - page 148

    134 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands bÑÑÉÅíë=oÉä~íÉÇ=`çãã~åÇë The table below lists LED-PRO effects related commands. m~åLwççãLsáÉï=oÉãçíÉ=`çãã~åÇë The table below lists LED-PRO pan/zoom/view remote commands. T able B-8. LED-PRO Effects Related Comma ...

  • Barco 26-0501000-00 - page 149

    LED-PRO • User ’ s Guide 135 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds ibaJmol=pÉêá~ä=`çãã~åÇ=aÉëÅêáéíáçåë obpe • Description : Query the available resolution list for the LED-PRO. • Parameters : None • Returns : All available resolutions in the format: n : HxV @F (example: 20 : 1024x768 @5 ...

  • Barco 26-0501000-00 - page 150

    136 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands Returns De-interlacer mode in the format = mode S DINT 1 1 (Set De-interlacer mode to Fld->Frm) S DINT? 1 (Queries De-interlacer mode for channel 1) m`ljm=áå=ãçÇÉ • Description : Sets the de-interlacer's Pulldown Compe nsation mode. ...

  • Barco 26-0501000-00 - page 151

    LED-PRO • User ’ s Guide 137 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds Returns the Input Aspect Ratio of specified source in the format = n cn S AR 1 5 2.0 (Sets aspect ratio of channel 1 to Custom and sets the custom aspect ratio to 2.0) S AR? 1 (Queries Input aspect ratio of cha nnel 1) f^rql` • Description : Au ...

  • Barco 26-0501000-00 - page 152

    138 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands • Query : ICPHO? in Returns the Input Clock Phase Offset in the format = nn S CPHO 1 15 (Adjusts Input clock phase offset manually to 15 on input 1.) S CPHO? 1 (Queries the Input clock phase offset of channel 1.) f`ifpq • Description : Lists th ...

  • Barco 26-0501000-00 - page 153

    LED-PRO • User ’ s Guide 139 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds f`pm=áå=ãçÇÉ • Description : Sets Input Colorsp ace for the selected input channel. SMPTE, BET A, and M-II colorspace av aila ble only if input type is YPbPr • Parameters : in - Input chnl [1-4] mode - [0-3] RGB | SMP TE | BET A | M-II ...

  • Barco 26-0501000-00 - page 154

    140 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands • Query : IGM? in Returns the Input Gamma for the specified input channel in the forma t = n S IGM 1 2.2 (Set Input gamma value to 2.2 for channel 1) S IGM? 2 (Queries channel 2's Input gamma value.) fe^qs=åååå • Description : Set Inpu ...

  • Barco 26-0501000-00 - page 155

    LED-PRO • User ’ s Guide 141 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds nnnn - Input Horizo ntal T otal: nnnn[(Actual Input H T otal * 2/5) - +(Actual Input H T otal * 9/5)] • Query : IHTOTAL? in Returns the Input Horizon tal T otal in the format = nnnn S IHTOT AL 1 1344 (Set Input Horizontal T otal for channel 1 t ...

  • Barco 26-0501000-00 - page 156

    142 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands • Query : IRBRT? in c Returns the Input RGB Brightness value of the specified source in the format = nnn.n S IRBRT 1 R 10 (Adjusts input 1 Red Brightness to be +10%.) S IRBRT? 1 R (Queries input Red Brightness of channel 1.) fo`kq=áå=Å=åååK ...

  • Barco 26-0501000-00 - page 157

    LED-PRO • User ’ s Guide 143 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds • Query : ISMP? in Returns the Input Sample Mode in the format = n S ISMP 1 0 (Adjusts Input Sample mode of channel 1 to OverSample) S ISMP? 1 (Queries Input Sample Mode of channel 1) fpvk`=áå=ãçÇÉ • Description : Adjusts the Input Sync ...

  • Barco 26-0501000-00 - page 158

    144 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands • Query : ITYPE? in Returns the Input T ype selecte d for the specified input channel in the format = mode S ITYPE 1 2 (Sets Input type to YPbPr on input channel 1.) S ITYPE? 1 (Queries Input type for channel 1) fs^qs=åååå • Description : S ...

  • Barco 26-0501000-00 - page 159

    LED-PRO • User ’ s Guide 145 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds S IVREC 1 (Recalls Input Channel View of channel 1) fsp^s=áå • Description : Input Channel View (Preset) Save • Parameters : in - Input chnl [1-4] S IVSA V 1 (Saves the Input Channel View for channel 1) i`h=áå • Description : Queries L ...

  • Barco 26-0501000-00 - page 160

    146 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands type [1-2], V Lock | HV Lock • Query : LCKMODE? Returns the Lock T o Source Mode and T ype in the format = mode type S LCKMODE 1 2 (Enable Lock T o Source and set T ype to HV Lock) S LCKMODE? (Queries Lock T o Source Mode and T ype) i`hme^pb==Ü= ...

  • Barco 26-0501000-00 - page 161

    LED-PRO • User ’ s Guide 147 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds ldj=ãçÇÉ • Description : Set LED Wall Ou tput Gamma. • Parameters : mode [0-3], Indoor1 | Indoor2 | Outdoor1 | Outdoor2 • Query : OGM? Returns the Output Gamma value in the format = mode S OGM 1 (Set Output Gamma to Indoor1) S OGM? (Que ...

  • Barco 26-0501000-00 - page 162

    148 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands • Parameters : nnnn - Output Horizontal Sync Width: nnnn [4 - (Output H T otal - Output H Active - Output Horizontal Front Porch -4)] • Query : OHSYNC? Returns the Output Horizontal Sync Width value in the format = nnnn S OHSYNC 120 (Set Output ...

  • Barco 26-0501000-00 - page 163

    LED-PRO • User ’ s Guide 149 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds • Query : OVATV? Returns the Output V ertical Active value in the format = nnnn S OV A TV 768 (Set Output V ertical Active to 768) S OV A TV? (Queries Output V ertical Active) lsmlp=åååå • Description : Set Output V e rtical Position. The ...

  • Barco 26-0501000-00 - page 164

    150 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands S OVTOT AL? (Querie s Output V ertical T otal) bcifpq • Description : Lists the names of all saved custom formats. • Parameters : None • Returns : List the names of saved custom formats, one name per line. S EFLIST (Lists all saved custom for ...

  • Barco 26-0501000-00 - page 165

    LED-PRO • User ’ s Guide 151 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds • Query : EFHTOTAL? Returns the custom format's Horizontal T ot al value in the format = nnnn S EFHTOT AL 1344 (Set custom forma t H T otal as 1344) S EFHTOT AL? (Query the custom format's H T otal value) bce^qs=åååå • Descripti ...

  • Barco 26-0501000-00 - page 166

    152 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands • Parameters : None • Returns : nn.nn - H Rate S EFHRA TE? (Query custom forma t's H Rate value) bcsqlq^i=åååå • Description : Set custom format's V ertical T otal value. • Parameters : nnnn - V T otal [480 - 4096] • Query : ...

  • Barco 26-0501000-00 - page 167

    LED-PRO • User ’ s Guide 153 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds Returns the custom format's V ertical Sync value in the format = nn S EFVSYNC 2 (Set custom format V Sync as 2) S EFVSYNC? (Query the custom format's V Sync value) bcso^qb=åååKå • Description : Set custom fo rmat's V ertical ...

  • Barco 26-0501000-00 - page 168

    154 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands • Usage : ENETM mode [0|1] Off|On bae`m • Description : Sets DHCP mode. • Parameters : mode - DHCP mode [0-1] Off | On • Query : EDHCP? Returns the DHCP mode in the format = mode S EDHCP 1 (Sets DHCP mode to On) S EDHCP? (Queries the DHCP m ...

  • Barco 26-0501000-00 - page 169

    LED-PRO • User ’ s Guide 155 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds • Returns : MAC address. xx:xx:xx:xx :xx:xx S EMAC? (Queries for Ethernet MAC address) p_^ra=å • Description : Adjust the Serial Baud Rate. • Parameters : n - Serial baud rate : n[0-4] 1200 | 2400 | 9600 | 19200 | 38400 • Query : SBAUD? ...

  • Barco 26-0501000-00 - page 170

    156 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands jfkjlab • Description : Set Minimum Delay Mode • Usage : MINMODE mode [0|1] disable|enable jfkpq^q • Description : Query Minimum Delay St atus • Usage : MINST A T mode [0|1] disable|enable il`hlrq • Description : Locks and unlocks the fro ...

  • Barco 26-0501000-00 - page 171

    LED-PRO • User ’ s Guide 157 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds • Parameters : type - T ransi tion type [0-2] 0= Fade to black, 1=Freeze image and Cut, 2= Fade to logo in - T ransiti on delay (in seconds) [1.0s - 5.0s] • Query : TRN? Returns the current transition type and transition delay in the format = ...

  • Barco 26-0501000-00 - page 172

    158 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands vvv .v - V ertical Pan (-100.0% - +100.0%) sfbta=åå • Description : Delete saved View (Preset) • Parameters : nn - View Index [1 - 15] S VIEWD 1 (Delete View 1.) sfbto=åå • Description : Recall View (Preset) • Parameters : nn - View Ind ...

  • Barco 26-0501000-00 - page 173

    LED-PRO • User ’ s Guide 159 _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Comma nds wllj=åååKå • Description : Selects zoom scale factor (applied both horizontally and vertically . • Parameters : nnn.n - Zoom value [mi n-max] depends on scale factor • Query : ZOOM? Returns the current zoom scale factor in the format = ...

  • Barco 26-0501000-00 - page 174

    160 LED-PRO • User ’s Guide _K==oÉãçíÉ=`çåíêçä=mêçíçÅçä LED-PRO Remote Commands ...

  • Barco 26-0501000-00 - page 175

    LED-PRO • User ’ s Guide 161 `K==`çåí~Åí=fåÑçêã~íáçå få=qÜáë=^ééÉåÇáñ The following topics are discu ssed in this Appendix: • Wa r r an t y • Return Material Authorization (RMA) • Contact Information t~êê~åíó All video products are designed and tested to the highest quality standards and are backed by a full ...

  • Barco 26-0501000-00 - page 176

    162 LED-PRO • User ’s Guide `K==`çåí~Åí=fåÑçêã~íáçå Contact Informat ion `çåí~Åí=fåÑçêã~íáçå Barco Media and Entert ainment 1 1 101 T rade Center Drive Rancho C ordova, C alifornia 95670 USA • Phone: (916) 859-2500 • Fax: (916) 859-2515 • Websites: ~ www .folsom.c om ~ www .events .barco.com Sales Contact Infor ...

  • Barco 26-0501000-00 - page 177

    LED-PRO • User ’ s Guide 163 fåÇÉ ñ kìãÉê áÅë 10/100BaseT . . . . . . . . . . . . . . . . . . . . . . . . . . 1 6 1-1 sampling . . . . . . . . . . . . . . . . . . . . . . . . . . 69 1-1 T iming Adjust Menu . . . . . . . . . . . . . . . . . . 70 50/60 Hz refresh rate . . . . . . . . . . . . . . . . . . . . . 5 ^ About LED-PRO . . . . ...

  • Barco 26-0501000-00 - page 178

    164 LED-PRO • User ’s Guide Index ` Cable information . . . . . . . . . . . . . . . . . . . . . . 18 Capture logo . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Change history . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi sampling mode . . . . . . . . . . . . . . . . . . . . . 70 Chapter structure . . . . . . . . . . . . . ...

  • Barco 26-0501000-00 - page 179

    LED-PRO • User ’ s Guide 165 Index DMSG mode . . . . . . . . . . . . . . . . . . . . . . . . . 1 53 Documentation conventions and symbols . . . . . 3 Double arrow . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 Download software . . . . . . . . . . . . . . . . . . . . 1 13 serial upgrade . . . . . . . . . . . . . . . . . . . . . 1 14 vi ...

  • Barco 26-0501000-00 - page 180

    166 LED-PRO • User ’s Guide Index overview . . . . . . . . . . . . . . . . . . . . . . . . . . 49 recall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Green brightness, analog source . . . . . . . . . . . . 44 contrast, analog source . . . . . . . . . . . . . . 44 ...

  • Barco 26-0501000-00 - page 181

    LED-PRO • User ’ s Guide 167 Index Inputs sec tion . . . . . . . . . . . . . . . . . . . . . . . 10, 13 Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Installation hardware . . . . . . . . . . . . . . . . . . . . . . . . . 17 power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 rack mount . . . . . . . . . . . ...

  • Barco 26-0501000-00 - page 182

    168 LED-PRO • User ’s Guide Index LOGOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 LOGOI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 LOGOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 LOGOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 56 Luma T racking analog source . . . . ...

  • Barco 26-0501000-00 - page 183

    LED-PRO • User ’ s Guide 169 Index Overview , control . . . . . . . . . . . . . . . . . . . . . . . 26 Overwrit e Custom Format Menu . . . . . . . . . . . 74 OVPOS nnnn . . . . . . . . . . . . . . . . . . . . . . . . . 149 OVSYNC nnnn . . . . . . . . . . . . . . . . . . . . . . . 149 OVTOT AL nnnn . . . . . . . . . . . . . . . . . . . . . . . 1 ...

  • Barco 26-0501000-00 - page 184

    170 LED-PRO • User ’s Guide Index RESH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 RESI nn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 Resolution remote commands . . . . . . . . . . . . 128 Return material authorization . . . . . . . . . . . . . 161 RGB . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Barco 26-0501000-00 - page 185

    LED-PRO • User ’ s Guide 171 Index description . . . . . . . . . . . . . . . . . . . . . . . . 37 fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Support, technical information . . . . . . . . . . . . 162 S-Video ( Y/C) . . . . . . . . . . . . . . . . . . . . ...

  • Barco 26-0501000-00 - page 186

    172 LED-PRO • User ’s Guide Index v YUV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 16 w Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 ZOOM nnn.n . . . . . . . . . . . . . . . . . . . . . . . . . 159 ...

Fabricant Barco Catégorie Stereo System

Les documents que nous recevons du fabricant de l'appareilBarco 26-0501000-00 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Barco
- manuels d’utilisations 26-0501000-00
- fiches produit Barco
- dépliants
- ou étiquettes-énergie Barco 26-0501000-00
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Barco 26-0501000-00.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Barco 26-0501000-00, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Barco 26-0501000-00. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Barco 26-0501000-00.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Barco 26-0501000-00, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Barco 26-0501000-00 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Barco 26-0501000-00.

Le manuel d’utilisation complet Barco, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Barco 26-0501000-00 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Barco 26-0501000-00, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lBarco 26-0501000-00 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Barco 26-0501000-00 - qui devraient nous aider dans les premières étapes lors de l'utilisation Barco 26-0501000-00
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Barco 26-0501000-00
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Barco 26-0501000-00 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Barco 26-0501000-00?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Barco 26-0501000-00, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Barco 26-0501000-00 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)