Manuel d’utilisation Barco R5900006

124 pages 10.1 mb
Télécharger

Aller à la page of 124

Summary
  • Barco R5900006 - page 1

    Cl i ckS h a r e Servic e Guide R5900006/03 04/12/2013 ...

  • Barco R5900006 - page 2

    Barc o nv President Kennedypark 35, 8 500 Kortrijk, Belgium Phone: +32 56.23.32.11 Fax: +32 56.26.22.62 Support: www.barco.com/esupport Visit us at the web: www.barco.com Printed in China ...

  • Barco R5900006 - page 3

    Changes Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied war- ranties or merchantability and fi tness for a particular purpose. Barco may m ake improvements and/or changes to the pr oduct(s) and/or the program(s) described in this publication at any time with ...

  • Barco R5900006 - page 4

    4. Barco shall hold you harmless, defend and indem nify you from and against direct damages, losses and ex penses arising from in- fringement or alleged infringement of any patent, trademark or copyright of s u ch thir d party by the license and the right to instal l the Software as permitted by t his Software License and settle at its s ole expens ...

  • Barco R5900006 - page 5

    9. This Software License is t he only understanding and agreement between you and Barco for use of the Software by you and/ o r Autho- rized Users. The Software License supersedes all other communications, understandings or agreements we had prior t o this Software License (with the exception of any continuing con fi dentiality agreement) although ...

  • Barco R5900006 - page 6

    EACH SEP ARA TE OPEN SOURCE SOFTWARE COMPONENT AND ANY RELA TED DOCUME NT A TION ARE PROVIDED "AS IS" WITH- OUT EXPRESS OR IMPLIED WARRANTY INCLUDING, BUT NOT LIMITED T O, THE IMPLIED WARRANTIE S OF ME RCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE. IN NO EVENT SHALL THE COPYRIGHTHOLDER OR ANY OTHER CONTRIBUTOR BE LIABLE FOR DIRECT ...

  • Barco R5900006 - page 7

    Open So urce component Open Source Licens e gdbserver http://www .gnu.org/licenses/lgpl.html grub http:// w ww .gnu.org/licenses/lgpl.html gstreamer http:// w ww .gnu.org/licenses/lgpl.html hdparm http://opensource.org/lic enses/BSD -3-Clause hostapd http:// opensource.org/licenses/BSD -3-Clause i2c-tools http: //www .gnu.org/licenses/old-li censes ...

  • Barco R5900006 - page 8

    Open So urce component Open Source Licens e libstdc++6 http://www .gnu.org/licenses/gpl.html libtalloc2 http:// www.gnu.or g/licenses/lgpl.html libusb http:// www.gnu.or g/licenses/old-licenses/l gpl-2.1.html libxml2 http://opensource.org/licenses/MIT libz1 Free license lighttpd http: //opensource.org/licenses/BSD-3-Clause lmsensors http://www .gnu ...

  • Barco R5900006 - page 9

    Open So urce component Open Source Licens e udev http://www .gnu.org/licenses/old-licenses/gpl- 2.0.html update-modules http://www .gnu.org/licenses/old-li censes /gpl- 2.0.html update-rc http:// w ww .gnu.org/licenses/old-li censes/gpl-2.0.html usbutils http:// www.gnu.or g/licenses/old-licenses/gpl- 2.0.html util-linux-ng http:// www.gnu.or g/lic ...

  • Barco R5900006 - page 10

    This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditi ons: 1. this device may not cause harmful interference, and 2. this device must accept any interf erence received, including interference that may cause undesired operation of the device. FCC RF Radiation Expos ure Stat e ment: This device is capab ...

  • Barco R5900006 - page 11

    Déclaration d’antenne d’Industrie Canada (IC) Conformément à la réglementation d’Industr ie Canada, le présent émetteur radio peut foncti o nner avec une antenne d’un ty pe et d’un gain maximal (ou inférieur) approuvé pour l’émetteur par Industr ie Canad a. Dans le but de réduire l es risques de brouillage r adioélectrique à ...

  • Barco R5900006 - page 12

    ...

  • Barco R5900006 - page 13

    Tabl e of con tent s T ABLE OF CON TENTS 1 . I n t r o d u c t i o n ..... ...... ...... ...... .... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... 3 1 . 1 A b o u t t h i s g u i d e ................... ....................... ...................... .............................. ................ ....... ...

  • Barco R5900006 - page 14

    Tabl e of con tent s 8.21 Downloads from B ase Unit . ....... ....................... .............................. ...................... ....................... 7 7 8.22 Manage Sys tem Con fi g u r a t i o n ............ .............................. ...................... ....................... ............... 7 7 8.23 Load Default Sett ings ...

  • Barco R5900006 - page 15

    1. Introdu ction 1. INTROD UCTION In this section you get a short introduct ion to the available ClickShare documentation. • About this guide • About the doc umentation • Symbols and fonts 1.1 About this guide Ve r s i o n Partnumber Description Level R5900006 Service Guide Barco service personnel / Custom er support Always check for the late ...

  • Barco R5900006 - page 16

    1. Introduc tion 1.3 Symbols and fonts Symbol overview The following icons are us ed in the manual : Caution Warn in g Info, term de fi nit ion. General info about the term Note: gives extr a information about t he described subject Ti p: gives extra advice about the described subjec t Font overview • Buttons are indi cated in bold, e.g. OK . ? ...

  • Barco R5900006 - page 17

    2. Safety i nstructions 2. SAFETY INSTRUCTIONS Overview • General safety • Environmental Condition Check • Plug types ClickShar e • Adapter types ClickShare Link • Repacking • Connector instructi ons 2.1 Gene ral safety Safe ty warni ngs The installation of the device must comply with the guidelines in the ClickShare Installation Guide ...

  • Barco R5900006 - page 18

    2. Safety i nstructions Enviro nment Do not install the device in a site near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust or humidity . Be aware that room heat rises to the ceil ing; check that temperature near the i nstallation site i s not excessive. 2.3 Plug types Cli ckShare A CP o w e r ...

  • Barco R5900006 - page 19

    2. Safety i nstructions 2.4 Adapter types Clic kShare Link T ype A power input AC clip Image 2-1 T ype C power input AC clip Image 2-2 T ype G power input AC clip. Image 2-3 T ype I pow er input AC clip (two pins) Image 2-4 2.5 Repac king On Repa ckin g Save the original shipping car ton and packing material; they w ill come in handy if you ever ha ...

  • Barco R5900006 - page 20

    2. Safety i nstructions 2.6 Connector instructions Connector instructions Several types of connectors are us ed in the ClickShare product: it is impo rtant to disconnect them by pulling the connector , not the wire. Some of the connectors (e.g. mains pow er plug) can be mechanically secured: make sure to release the mechanical lock prior to unplugg ...

  • Barco R5900006 - page 21

    3. ClickSh are Service ac tivities 3. CLICKSHARE SERVICE ACTIVITIES 3.1 Cli ckShare detaile d service model Sales model Distributor Dealers Customer Image 3-1 Sales model The way ClickShare comes to the c ustomer: 1. Distributor purchases from Barco. 2. Dealers purchase from a distributor . 3. Dealers sell to the end customer . Service model Distri ...

  • Barco R5900006 - page 22

    3. ClickS hare Service a ctiviti es Image 3-3 4. Fill out the service request form Image 3-4 5. Click Subnit & Add Attachme nt . 6. Click Choose File and browse t o the fi l et oa t t a c h . 7. Click A ttach fi le . 8. T o add extra fi les, r epeat the Choose File and Attach fi le action. When al l fi les are attached click Done . Image 3 ...

  • Barco R5900006 - page 23

    3. ClickSh are Service ac tivities An overview will be displayed. Ex tra i nformation can be added. Y our service request is logged. 3.3 Rea chin g the loca l Barco help desk How to reach 1. Go to B arco’ s web sit e, ww w .b arco .com . Image 3-6 2. Click on the d rop down next to T raining & Support and select Support . 3. Select your Count ...

  • Barco R5900006 - page 24

    3. ClickS hare Service a ctiviti es Image 3-8 12 R5900006 CLICKSHA RE 04/12/2013 ...

  • Barco R5900006 - page 25

    4. Product an d compone nts 4. PRODUCT AND C OMPONENTS Overview • About the ClickShare product • ClickShare speci fi cations • ClickShare Link speci fi cations • About the Base Unit • About the Button • About the Tray • Retrieving the ser ial and version numbers • Mobile Device Support 4.1 About the ClickShare product Cli ckShar e ...

  • Barco R5900006 - page 26

    4. Product an d compone nts Regional v ersion Contain s Accessories included R9861005EU • R9861006BEU • 4x R9861006D01 • R9861006T01 • power cables CEE7 and BS 1363 • wall/ceiling mounting brackets • a DVI to VGA converter R9861005JP • R9861006BJP • 4x R9861006D01 • R9861006T01 • power cable JIS C8303 • wall/ceiling mounting b ...

  • Barco R5900006 - page 27

    4. Product an d compone nts Range Max. 30m (100 ft) between ClickShare Button and ClickShare Base Unit Encryption AES CCMP Wireless transmission protocol IEEE 802.1 1 a/g/n Lifeti me MTBF = 40,000h (90% con fi de nce level) MTBF = 1 00,000h (60% con fi denc e level) MTBF conditions: • Environment: Ground B enign • T em perature: 25°C • Met ...

  • Barco R5900006 - page 28

    4. Product an d compone nts 4.3 ClickShare Link speci fi ca tions Overview Dimensio ns 1 16 mm x 60 mm x 23 mm (4.57” x 2.36” x 0.91”) Weight < 250g Connection with Base Unit USB Vide o Input Single link DVI Video O utput USB mini type B Powe r Using external power adaptor (included in the package): • DC output: 5V , 2A • AC input: 10 ...

  • Barco R5900006 - page 29

    4. Product an d compone nts 2 1 3 2 Image 4-3 Base Unit 1 USB port 2 S tatu s LED s trip 3 Standby button Ta b l e 4 - 3 USB port The USB port is used to update the software of both the Base Unit and the Buttons. When plugging in the Button into the Base Unit, the Button is paired t o the Base Unit. The B ase Unit checks whether the Button’ s sof ...

  • Barco R5900006 - page 30

    4. Product an d compone nts Back layout of the Base Unit At the back of the Base Unit you can fi nd the rocker switch, the label, the ports and connectors of the Base Unit. 1 2 3 4 5 6 7 8 9 10 1 Image 4-4 Backside of the B ase Unit 1 Fixture points for the antenna 2 Label containi ng the article number and power rating of the product 3 Mains powe ...

  • Barco R5900006 - page 31

    4. Product an d compone nts Image 4-5 V entilati on grids IN and OUT The Base unit sucks air via the top ventilation grid and push hot air out on both sides. Make sure not to cover the ventilat ion grids during operation of the Base Unit. Always keep a free area of minimum 50 mm in front of all vent ilat ion grids. Bottom layout of the Base Unit Th ...

  • Barco R5900006 - page 32

    4. Product an d compone nts 1 USB connector 2B u t t o n 3L E D r i n g Ta b l e 4 - 6 USB connector Using the USB connector the Button can be plugged into a laptop (for sharing your screen) or t he Base U nit (for pairing the But ton to the Base Unit or updating its software). Button Click the Button to di splay the content of the laptop’ s scre ...

  • Barco R5900006 - page 33

    4. Product an d compone nts Image 4-7 T ray layout Article number The speci fi c article number of the tray can be found at the bottom of it . Do not cl ean the T ray wit h products con tainin g alcohol . T ray is passive, requires no power or b atteries. 4.7 Retrieving the serial and vers ion numbers Base Unit an d Button label Y ou can e asily ? ...

  • Barco R5900006 - page 34

    4. Product an d compone nts App Used on Logo ClickShare Presenter Android and iOS MirrorOp Sender for Galaxy Samsung G alaxy only 22 R5900006 CLICKSHA RE 04/12/2013 ...

  • Barco R5900006 - page 35

    5. Installi ng Cli ckShar e 5. INST ALLING CLICKSHARE W ARNING : Do not conne ct to the ma ins power dur ing in stallat ion. W ARNING : Only use the antennas that are delivered wit h the product. Other antennas are not allowed. Overview • Installati o n methods for t he Base unit • T able mounting • W a ll mounting • Ceiling mounting • Ra ...

  • Barco R5900006 - page 36

    5. Instal ling ClickS hare 5.3 W all mounting About wall mounting Use the mounting brackets, inser ted in the ClickShare box, to mount the Base unit on the wall . The total weight of the Base Unit — including the mounting brackets — is 2,9 kg. Necessary t ools • a drill (type of drill depends on the type of wall) • T orx T10 screwdriver • ...

  • Barco R5900006 - page 37

    5. Installi ng Cli ckShar e 173mm Image 5-1 4. T o mount the Base unit on t he wall, h ook the slots in the brackets ov er the 2 screws in t he wall (front side of the Base unit directed toward s the ceiling or t he fl oor) and pull it downward until it is secured. C AUTION : It i s only all owed to mount t he Base Unit f ront side up or down. Mou ...

  • Barco R5900006 - page 38

    5. Instal ling ClickS hare Necessary p arts • Mounting brackets (included in the ClickShare box) • 4 mounting screws and corresponding screwdriv er (not included) How to install 1. Drill four holes in the ceiling according to t h e dimensions indicated in the picture below ( length: 2 77mm, depth: 157mm) 277mm 157mm Image 5-2 Ceiling m ount 2. ...

  • Barco R5900006 - page 39

    5. Installi ng Cli ckShar e Image 5-3 Removal of pre-mount ed screws 3. Install the mounting brackets to the Base Unit as shown on image 5-2. D rive in the four removed Pan Head T10 M 3 screws to secure t he brackets to the Ba se Unit. 4. Insert a plug in each hole (if needed and depending on the ceiling type) and drive in the 4 moun ting screws. N ...

  • Barco R5900006 - page 40

    5. Instal ling ClickS hare Image 5-4 Removal of pre-mount ed screws 2. Place the Base Unit on t he rack mount and drive in the four removed Pan Head T10 M3 screws. Refer to “1” on image 5-5. 3. Fasten the antenna to the front panel of the rac k moun t. Refer to “2” on image 5-5. 1 2 3 3 2 1 Image 5-5 4. Tight en the antenna cables to the ba ...

  • Barco R5900006 - page 41

    6. Conne cting 6. CONNECTING Overview • Video signal c onnections to the Base Unit • Audio connection • LAN connection • Power connection and switching on • Connecting an iOS device •B a s i c U s e • Advanced Use • User Interface • Capture mode: detail e d - f a st • Shared desktop: primary - extended •A u d i o c o n fi gur ...

  • Barco R5900006 - page 42

    6. Connecti ng 1 Image 6-1 Display cabl es connecti on Note: Display cables ar e not included in the Cl ickShare box at purchase. Supported types of displays are: - Single Link D VI -D i s p l a y P o r t - VGA: use the adapter included in t he ClickShare box (reduced blanking on highest resolution) - HDMI: use an adap ter cable (not incl uded in t ...

  • Barco R5900006 - page 43

    6. Conne cting 6.2 Audio connection About audio The ClickShare Button captures the audio output of the user’s laptop and sends it to the Base Unit together with t he video signal. The Base Unit will then mix t he audio signals from all Buttons that are sharing their content . The mixed audio will be output at line levels from the mini j ack socke ...

  • Barco R5900006 - page 44

    6. Connecti ng Image 6-4 LAN connect ion 2. Connect the other side to a LAN. 6.4 Power connection and swit ching on W ARNING : Use a power cor d which compli es to loc al regul ations. If not inc luded in the box, contact your local dealer f or a correct power cord. How to connect 1. Plug the power cable in the mains po wer connector at the back of ...

  • Barco R5900006 - page 45

    6. Conne cting If the Base unit does not start up automatically , use the standby button. The standby button at the front can now fully control the unit . Image 6-6 Standby but ton The standby button has the following functions: - When the system is awake, a short push triggers the s ystem to go into standby mode. - When the system is in standby mo ...

  • Barco R5900006 - page 46

    6. Connecti ng USB USB HDMI iPad ClickShare Base Unit HD ClickShare Link Image 6-7 iPad co nnection vi a cable 2. Connect an HDMI to DVI video cable to the DVI input of the ClickShare Link or place the convertor from DVI to HDMI on the ClickShare Link and connect an HDMI cable. 3. Connect the power adapter to t he power input of the ClickShare Link ...

  • Barco R5900006 - page 47

    6. Conne cting USB USB DVI HDMI Apple T V iPad ClickShare Link ClickShare Base Unit Image 6-12 Wirele ss iPad connecti on 2. Connect an HDMI to DVI video cable to the DVI input of the ClickShare Link or place the convertor from DVI to HDMI on the ClickShare Link and connect an HDMI cable. 3. Connect the HDM I side of the cable to the Apple TV . For ...

  • Barco R5900006 - page 48

    6. Connecti ng In this example, we wil l connect to t he wireless network of the Base Unit. If you want to use a dif ferent network, please contac t your IT administrator . - Go into the Apple TV main menu and connect to t he ClickShare Base Unit WiFi (IP address = 192.168.2.1 , pa ssword : clickshare ,S S I D : ClickSharre-”serial number unit” ...

  • Barco R5900006 - page 49

    6. Conne cting - Return to the Ho me page of the A pp l e TV . Image 6-22 - Calibrate the ClickShare Link to the Apple TV menu by going into the ClickShare Link Base U nit web interface. By calibrating the Link, we make sure that the Apple TV m enu is not shown in the ClickShare composition. iOS content will only be shown when an iOS device is actu ...

  • Barco R5900006 - page 50

    6. Connecti ng Image 6-24 2. Insert the Button into a USB port of yo ur laptop. Image 6-25 38 R5900006 CLICKSHA RE 04/12/2013 ...

  • Barco R5900006 - page 51

    6. Conne cting The LEDs of the Button start fl ashing whit e. On your laptop a new drive appears. T wo situation are possible now: - A launcher is preinstall ed on your laptop (downloaded from th e Base Unit or Barco website, or deployed com pany-wide by your IT department). ClickShare is immediatel y available. Y ou can continue with s tep 5. - n ...

  • Barco R5900006 - page 52

    6. Connecti ng 6.7 Advanced Use Advanced functionality ClickShare can show the content of up to four wireles s sources or three wireless sources and one ClickShare Link (f or an iPad) on the meeting room display(s) at the same time. A wireless source is a ClickS hare Button, or either an iPad or android device sharing via the ClickShare app. This m ...

  • Barco R5900006 - page 53

    6. Conne cting 4 users panoramic setup 2 users panoramic setup 1 user panoramic setup 2 1 34 12 1 Image 6-31 For Panoramic projectors which require Dual Link DVI in, use the Barco kit B560 6021 to convert DisplayPort into Dual Link DV I. Image 6-32 DisplayPor t convertor If you are t he fi fth user who wants to share his screen, you are blocked. A ...

  • Barco R5900006 - page 54

    6. Connecti ng user 5 5 5 4 users 12 34 Image 6-34 Dual display 2 1 34 5 Image 6-35 Panoramic di splay When you click again, your content is removed and the Base Unit shows the welcome screen again. The cont ent of the previ ous users is not rest ored on the displa y . 6.8 User Interface User Interface funct ionality After launching t he client, th ...

  • Barco R5900006 - page 55

    6. Conne cting Click To R e s u l t About ClickShare Client to fi nd out the ClickShare software version. Here you can fi nd more informati on on the ClickShare software version. Exit to close ClickShare. The ClickShare icon disappe ars from the system tray and the LEDs of the Button start blinki ng w hite. 6.9 Capture mode: detailed - fast Only ...

  • Barco R5900006 - page 56

    6. Connecti ng About shared desktop Depending on your selection, your primary screen or your extended screen will be captured and displayed via ClickShare. That extended screen can be a physical screen or a virt ual screen. With extended desktop you can take advantage of both your laptop s creen and the central meeting room display . Presentation n ...

  • Barco R5900006 - page 57

    6. Conne cting T o know if your system suppo rts the extended desk top feature, press Wind ow key + P . It should br ing up the following pop-up on screen: Image 6-41 How to select 1. Right click on the ClickShare icon in the system tray (1). Image 6-42 Shared de sktop selec tion A context menu opens. 2. Select Shared Des ktop (2). 3. Select the de ...

  • Barco R5900006 - page 58

    6. Connecti ng Image 6-43 Speakers Cl ickShare, defaul t 2. Click Playback devices (2). The Sound window opens on the P layback tab. 3. Select Speakers ClickShare (3) and click Set default (4). 4. Click Apply or OK to activate the new setting. Set ClickShare as default in Windows XP 1. Right click on t he speaker icon in the system tray . Image 6-4 ...

  • Barco R5900006 - page 59

    6. Conne cting 2. Click Adjust A udio Properties (1). The Sound and Audio Devices Properties window opens. 3. Select Audio tab (2). 4. Click on the drop down box in the Sound playb ack pane and select ClickShare (3).. 5. Click Apply or OK to activate the new setting. Set ClickShare as default on MAC 1. Click on the Apple logo on the me nu bar (1) a ...

  • Barco R5900006 - page 60

    6. Connecti ng 48 R5900006 CLICKSHA RE 04/12/2013 ...

  • Barco R5900006 - page 61

    7. Preparing the buttons 7. PREP ARING THE BUTTONS Overview • Pairing • Pre-install of the Launcher service 7.1 Pairi ng Pairing of the Buttons with t he Base Unit T o be able t o use a Button it should be assigned to the Base Unit you ar e using. This process is called pairi ng. By default, the four Buttons delivered with the ClickShare set ar ...

  • Barco R5900006 - page 62

    7. Preparing the but tons Both the LEDs of the Button and the LEDs of the Base Unit are blinking white. This means pairing is in progress. The Base Unit automaticall y checks whether the s oftwar e of the Button i s up to date. I f not, the Base Unit updat es the Button software. This may take m ore time. During the pairing and update process, a me ...

  • Barco R5900006 - page 63

    8. Web I nter face 8. WEB INT ERF ACE Overview • Accessing the ClickShare Web Interface • Language setup W eb interface • About C lickShare tabs • Basic settings • W a llpaper (background) selection • Personalized wallpapers • Display settings • Output ports • On-screen text format • Audio settings • Advanced settings: H ostna ...

  • Barco R5900006 - page 64

    8. Web In terface By default, the password is set to ’admin’. The web interface opens. Image 8-1 Web interf ace, startup screen The language of the web interface can be changed. It contains also three tabs: Set up , Mai ntenance and Help . If you cannot fi nd the IP address (e.g. there is no screen available) you should connect to the Base Uni ...

  • Barco R5900006 - page 65

    8. Web I nter face The following languages are possibl e : • Arabic •S i m p l i fi ed Chinese • T raditional Chinese • Danish •D u t c h •E n g l i s h •F i n n i s h • French •G e r m a n • Italian • Japanese • Korean • Norwegian • Portuguese • Russian • Spanish • Swedish How to change 1. Click on the drop down ...

  • Barco R5900006 - page 66

    8. Web In terface Image 8-3 T ab pages 1 Main tab bar 2S u b t a b b a r 3 Information and fi ll out pane 8.4 Basic settings About Basic settings The basic settings contain the following infor m ation: • Meeting room name • Meeting room location • Welcome message T o change the bas ic settings 1. Log in to the Cli ckS hare web inter face. 2. ...

  • Barco R5900006 - page 67

    8. Web I nter face Image 8-4 Setup, basic se ttings The Basic tab is displayed by default. 3. In the Ide nti fi cation section click in an input fi eld and enter - the name of the meeting room - the location of the meeting room - a welcome message wh ich wil l be displayed below the meeting room name and location. Note: The name of the meeting ro ...

  • Barco R5900006 - page 68

    8. Web In terface Image 8-5 A message is displayed to indicate t hat the changes are successful. The new name, location and welcome message are displayed in the lef t top corner of the s creen. 8.5 W al lpape r (bac kgrou nd) sel ectio n About wallpaper When ClickShare starts up, a background (wallpaper) is displayed. By default a general ClickShar ...

  • Barco R5900006 - page 69

    8. Web I nter face Image 8-6 Wal lpaper select ion 3. Select one of the available wallpapers (3) and cli ck Apply (5).. Note: By default a general Barco ClickShare wallpaper and a ClickShare Quick Start Guide wallpapers are avai lable. They are autom atically resized to fi t the aspect ratio of the screen. The selected wallpaper is indic ated with ...

  • Barco R5900006 - page 70

    8. Web In terface When 2 screens are connected, an extra item Show Display Ident i fi ers appears in the D isplay pane. When checked, a sequence number is displayed on each display . Image 8-8 Display identi fi ers 8.6 Personalized wal lpapers About a personalized wallpaper Via t he web interface it is pos sible to upload personalized backgrounds ...

  • Barco R5900006 - page 71

    8. Web I nter face Image 8-9 Add wallpa per The Wallp ape r tab page is displayed. 3. In the Background wallpapers pane, click on the “ + ”s i g n( 3 ) . A browser w indow opens. 4. Select the desired fi le (4) and click Open (5). The content of the fi le is checked and when valid (format and size), the fi le is uploaded (6). The message Suc ...

  • Barco R5900006 - page 72

    8. Web In terface 2. Click on the delete button to delete the wallpaper . The message Successfully applied changes is displayed on top of the page. 8.7 Display settings About display settings The following settings can be con fi gured for the display(s): • Standby timeout. Time between the last action and moment the system goes into standby . ? ...

  • Barco R5900006 - page 73

    8. Web I nter face • Information on supported “Established T imings” (most legacy timings, e.g. 720x400@70H z, 88Hz; 800x600@ 56Hz, 60Hz, 72Hz, 75Hz; ... ; ...) • Supported Standard T iming Identi fi cations (e.g. 1280x1024@ 60Hz, 1600x1200@60Hz,...) • Detailed T iming Information. The fi rst detail ed timing des cription is the “Pref ...

  • Barco R5900006 - page 74

    8. Web In terface ClickShare position As the base unit supports dual display , an output can be associated with the primary display or with the secondary display . Auto- matically the second input is associated with the f ree display . T o c hange the position, click on the dr o p down box next to ClickShare Position and se lect the position. The c ...

  • Barco R5900006 - page 75

    8. Web I nter face The following languages are possible: - Arabic - Simpli fi ed Chinese - Tradit ional Chinese -D a n i s h -D u t c h - English - Finnish - French -G e r m a n - Italian - Japanese - Korean - Norwegian - Portuguese - Russia n - Spanish - Swedish Te x t c o l o r 1. Click in the input fi eld next to T ext color or click on the co ...

  • Barco R5900006 - page 76

    8. Web In terface Image 8-16 Background c olor 2. Drag the marker in the color bar up or dow n until the des ired color is obtained (2). 3. T o change the tint of the selected col or , drag the circler marker in the square until the desired ti nt is obtained (3). T ran sparency 1. Move the slider t o the left or the right t o obtain the desi red tr ...

  • Barco R5900006 - page 77

    8. Web I nter face Image 8-18 Audio se ttings How to change 1. Log in to the Cli ckS hare web inter face. 2. Click the Setup tab and then the Audio tab. 3. T o enable audio on the Base Unit, check the chec k box next to Enable Audio Functionality . Changin g the aud io setti ng, requi res a r e-pairi ng of t he Button s. 8.1 1 Advanced settings: H ...

  • Barco R5900006 - page 78

    8. Web In terface 4. Select the current name and enter a new nam e. Note: The default hostname is “ClickShare-<serial number>”. 8.12 Advanced set tings: LAN network settings About LAN network settings A network connection can be c on fi g ured through DHCP or by manually entering a fi xed IP address. DHCP Dynamic host co n fi guration ...

  • Barco R5900006 - page 79

    8. Web I nter face Image 8-21 Fixed IP addr ess The Advanced tab is displayed. 3. Check the radio button next to Fixed address (3). The IP address, subnet and gateway input opens. 4. Click in the input fi eld of the IP address and fi ll out the 4 fi el ds. Note: An address contains 4 octet s with a maximum value of 255. This must NOT be 0.0.0.0 ...

  • Barco R5900006 - page 80

    8. Web In terface Image 8-22 WiFi sett ings 3. Enter a public name (SSID) for the wireless network. The default SSID is ClickShare-<serial base number> . 4. If you want to broadcast this SSID, check the checkbox behind Broadcast S SID . 5. Enter a new password and c on fi rm that password. 6. Select the wireless connecti on frequency band: 2 ...

  • Barco R5900006 - page 81

    8. Web I nter face Image 8-23 Access web interface 8.15 Advanced se ttings: access SSH About SSH access SSH (Secured Shell) is a n etwork protocol f or sec ure data communication, remote command-line login, remote comm and execution between networked devices that connect s via a secured channel over an insecure network. A Secured Shell access can b ...

  • Barco R5900006 - page 82

    8. Web In terface • the LAN interface settings, • the WiFi settings, • System identi fi cat ion • Historical updates • Subsystem status •S e n s o r s • System management T o check t he syst em statu s 1. Log in to the Cli ckS hare web inter face. 2. Click the Maintenance tab and click St atus . The Sta tus tab page is displayed. Ima ...

  • Barco R5900006 - page 83

    8. Web I nter face Image 8-26 Detail assoc iated devices System Ma nagement Use the Restart System button to restart ClickShare. Use the Shut down System butt on to shutdown ClickShare. Image 8-27 System manageme nt 8.17 Maintenance, Buttons information About buttons The Butt ons tab gives information on the Butt on s that hav e b een paired to the ...

  • Barco R5900006 - page 84

    8. Web In terface Image 8-28 Paired but tons, overview The list gives an overview of the Buttons that have in the past been paired to this Base Unit. If a Button has in the meantime been paired to another Ba se Unit, it will st ill appear in this list. T o remove it from the list, at the right of the tab page, click More and select Remove from list ...

  • Barco R5900006 - page 85

    8. Web I nter face Image 8-29 The Button can be r e moved from the l ist by cli cking on Re move Fr om List . ClickShare button manager By clicking o n Download (3), an XM L fi le is downloaded on the PC. This fi le contains all information about the base unit to pair buttons on your PC instead of on the base unit itself. T o pa ir buttons on a P ...

  • Barco R5900006 - page 86

    8. Web In terface The content of the Links tab is displayed. An overview of the con fi gured links is given with the following extra info of t he Link: - The green LED indicates that the Link is connected. - Source name: can b e changed to any name, just by clicking inside the input fi eld and entering a new name. - Serial number - Software versi ...

  • Barco R5900006 - page 87

    8. Web I nter face Image 8-31 Start cal ibration 3. Click Start C alib rati on . The calibration process starts. A calibration message with progress bar is displayed on the meeting room display . Use the Apple TV remote to cycle thr ough the top row of icons (t he row with Computers and Settings) on the home screen. When the c alibration is success ...

  • Barco R5900006 - page 88

    8. Web In terface Image 8-32 Download pag e How to update 1. Download the latest version of the software from Barco’ s website. 2. Log in to the Cli ckS hare web inter face. 3. Click the Maintenance tab (1) and then click Softwa re (2). Image 8-33 Update software The content of the Softwar e tab is displayed. The current version of the Base Unit ...

  • Barco R5900006 - page 89

    8. Web I nter face 8.21 Downloads from Base Unit About downloads The launcher service and the ClickShare client software for PC or MAC are stored on the Base Unit and can be downloaded for instal lation on the user’s PC. For more information, s ee "Pre-install of the Launcher s ervice", page 50. How to download 1. Log in to the Cli ckS ...

  • Barco R5900006 - page 90

    8. Web In terface T o manage the system con fi gur ation 1. Log in to the Cli ckS hare web inter face. 2. Click the Maintena nce tab (1) and then click Con fi guration (2 ).. Image 8-35 Manage system con fi guration The content of the Con fi gurat ion tab is displayed. 3. T o download a full bac kup, click on Dow nload Full Backup (3) . An xml ...

  • Barco R5900006 - page 91

    8. Web I nter face The following settings are the d efaults: • Meeting room identi fi c ation info is cleared. • Language is set to English. • Custom wallpapers are removed and the default wallpaper is rest ored. • Display resolution is set to auto and standby timer is r eset to in fi nity • Display Identi fi ers are t urned off. • H ...

  • Barco R5900006 - page 92

    8. Web In terface 3. Use the Up and Down ar row keys to sele ct Load Default S ettings in the boot menu (Grub) and press ENTER . 8.24 Administrato r password About the administrator password The administrator password to log in in the web interface can be changed at any time. T o change the administrat or password 1. Log in to the Cli ckS hare web ...

  • Barco R5900006 - page 93

    8. Web I nter face The content of the Logging tab is di splayed. Image 8-39 Logging 3. T o create a debug log, check the check box nex t to Debug Logging (3). 4. Reproduce the issue you want to r eport. 5. T o download the current log fi le, cli ck on Downloa d Log (4 ). 6. T o clear the current log fi le, click Clear Log (5) . 7. • T o enable ...

  • Barco R5900006 - page 94

    8. Web In terface Image 8-41 The content of the C ontact tab is displayed. The Contac t p age contains a link t o the ClickShare hom e page on Barco’s website (3). 3. Click on the link Visit th e Cli ckShare produ ct page . 4. Click Downl oads Image 8-42 All kind of manuals, brochures and software updates can be found on that page. 8.27 Barco Cli ...

  • Barco R5900006 - page 95

    8. Web I nter face Image 8-43 EULA 3. If desired, click Save ... (3) to save a copy of the agreemen t on your laptop. 4. In the Fi le Download window , c lic k Save . The Save as window opens. 5. Browse to the location wher e to store the EULA fi le and click Save . A copy of the B arco ClickShare EULA has been saved to your laptop. R5900006 CLICK ...

  • Barco R5900006 - page 96

    8. Web In terface 84 R5900006 CLICKSHA RE 04/12/2013 ...

  • Barco R5900006 - page 97

    9. Software u pdati ng 9. SOFTW A RE UPDA TING Overview • Retrieving software v e rsions • Base Unit software update • Emergency recovery procedure via software recovery stick • Buttons software update 9.1 Retrieving software vers ions Before updating th e software Check the current s oftware version of the Base Uni t and the Button.. Retri ...

  • Barco R5900006 - page 98

    9. Softwa re updating The content of the But ton s tab is displayed. Image 9-2 Paired but tons, overview 3. T o get more information on the Butt on fi rmwa re click More... . Image 9-3 9.2 Base Unit software update T wo possible ways to u pdate the software of the Base Unit •V i a t h e Maintenance tab of the web interface • Using a USB stick ...

  • Barco R5900006 - page 99

    9. Software u pdati ng As an emergency recovery procedure you can use the software update stick. However , in that case the software will be fully erased and the Base Unit will be ref ormatted. T o update the Base Unit software via the web interface 1. Download the latest version of the s oftware from Barco’s website, www.barc o.co m/ click sha r ...

  • Barco R5900006 - page 100

    9. Softwa re updating 5. Browse to the new software version and click Open to start the upload. Note: This should be an ipk fi le. Y ou might have to unzip the fi le downloaded f rom Barco’s website. Note: Updating the s o ftware to t he Base Unit and installing it can take several minutes. Progress can be followed on the meeting room display . ...

  • Barco R5900006 - page 101

    9. Software u pdati ng Image 9-7 Press the Standby button at the front if the unit does not start up automatically . 5. On the keyboard , press F12 . Press F12 immediately after starting up the Base U nit and keep it pressed until a message appe ars on screen asking to enter a password. Image 9-8 6. Enter ’clickshare’ as password. Beware when e ...

  • Barco R5900006 - page 102

    9. Softwa re updating The following screen appears. Image 9-10 8. Select the fi rst option and press Enter . A user nam e is requested. Image 9-1 1 9. Enter the user nam e (’barco’). A password is requested. Image 9-12 10.Enter the passw ord (’barco’). 90 R5900006 CLICKSHA RE 04/12/2013 ...

  • Barco R5900006 - page 103

    9. Software u pdati ng The following screen appears. Image 9-13 11 . P r e s s ’ y’ on the keyboard to start. The following window appears. Image 9-14 12.Enter the article number of the Base Unit and press Ente r . Image 9-15 Yo u c a n fi nd this number on the label a t the bottom of the Base Unit. The format of the article number is R9861006 ...

  • Barco R5900006 - page 104

    9. Softwa re updating 13.Enter the serial number of the Base Unit and press Enter . Image 9-17 Yo u c a n fi n d this number on t he label at the bottom of t he unit. Format is a 10-digit number . Re fl ashing star ts. Image 9-18 When fi ni shed successfully , a message appears and the unit wil l shut down. T he complete process can t ake severa ...

  • Barco R5900006 - page 105

    9. Software u pdati ng Image 9-19 The Base Unit automatically checks whether the software of the Button is up to date. If not, t he Base Un it automatically starts updating the soft ware. When the LEDs become static red, the updating (and pairing) process is fi nished. Note: in case no software update of the Button was required only pairing will b ...

  • Barco R5900006 - page 106

    9. Softwa re updating 94 R5900006 CLICKSHA RE 04/12/2013 ...

  • Barco R5900006 - page 107

    10. Maintena nce of the prod uct 10. MAINT ENANCE OF THE P RODUC T 10.1 Maintenance of your Cli ckShare Maintena nce No speci fi c periodic maintenance is needed. W ARNING : Do not cl ean the T ray with p roducts con taini ng alcohol. R5900006 CLICKSH ARE 04/12/2013 95 ...

  • Barco R5900006 - page 108

    10. Maintenan ce of the pr oduct 96 R5900006 CLICKSHA RE 04/12/2013 ...

  • Barco R5900006 - page 109

    11. Tr ouble shooting 1 1. TROUB LESHOOTING 1 1.1 Step by s tep support procedure Handle as follow for the Base Unit: 1. Set up the unit in a stand-alone environment. C onnect a keyboard and a monitor , known as working wit h ClickShare . 2. Check if the ba se unit starts up normally . If the wallpaper does not appear or the LEDs are blinking red. ...

  • Barco R5900006 - page 110

    11. Tr ouble shooting Probl em Cause Soluti on Web interface is not accessible Browser • Use another browser ( versi on). • Check the browser settings. No connection • There are three methods t o access the web interface. Refer to the corresponding chapter of the documentation. • Ch eck the proxy s ettings Users do not get a Click Share dri ...

  • Barco R5900006 - page 111

    11. Tr ouble shooting Probl em Cause Soluti on The display cables are not correctly connected Insert the display cables to t he displays and the Base Unit. The display does not recog nize or is not able to display the Base Unit output resolution. Change the corresponding setting via the web interfac e. The Base Un it is in standby mode Bri e fl y ...

  • Barco R5900006 - page 112

    11. Tr ouble shooting Probl em Cause Soluti on Virtualisati on software like Parallels When using a virtualisation software on Mac OS/X like Parallels, there are two possiblities: 1. The user can assign the USB port to te host machine (OS/X). In that case, Parallels content is treated like just another application, in other words, the us ers main d ...

  • Barco R5900006 - page 113

    11. Tr ouble shooting 1 1.3 Generating log fi les Log fi les can be generated from the • Base Unit • Client software • Button (included i n Base unit logging) T o generate log fi les from the Base Uni t 1. Login to the ClickShare web interf ace. 2. Click the Maintenance tab (1) and then click Loggi ng (2).. The content of the Logging tab i ...

  • Barco R5900006 - page 114

    11. Tr ouble shooting Image 1 1-3 Client lo gging 2. Reproduce the e rror of bug that occurred. 3. Download the log fi le. 102 R5900006 CLICKSHA RE 04/12/2013 ...

  • Barco R5900006 - page 115

    12. Frequentl y Aske d Quest ions 12. FREQUE NTL Y ASKED QUESTIONS 12.1 List of F AQs Feature s For the latest version of this list, please vi sit m y .b arco .com . 1. Do you support iPad? Supported at t h e end of fi rst quarter of 2013 and it will be backwards comp atible with the fi rst release. 2. Do you support other tablets (Android, Windo ...

  • Barco R5900006 - page 116

    12. Frequentl y Asked Q uestion s Performance 1. What frame rate ca n you guarantee? Our target for the fi rst release i s 20 frames per second. 2. What is the minimum and maximum s upported output r esolution for the central screen? - XGA (1024x768@60Hz) - WXGA (1280x800@60H z) - SXGA (1280x1024@ 60Hz) - SXGA+ (1400w1050@ 60Hz) - WXGA+ (1440x900@ ...

  • Barco R5900006 - page 117

    12. Frequentl y Aske d Quest ions Practic al 1. What about risk of theft? ClickShare Buttons are designed to avoid a sincere confusion with a USB mass storage device. The C lickShare Button is designed in such a way that people will notice it when walking awa y from the meeting room (weight, size, cable,…). In t he rare case that one takes the Bu ...

  • Barco R5900006 - page 118

    12. Frequentl y Asked Q uestion s 106 R5900006 CLICKSHA RE 04/12/2013 ...

  • Barco R5900006 - page 119

    13. Ord er info 13. ORDER IN FO 13.1 List of artic les and their order numbers List Order Number ( E-Item) E-Item Description Description R9861005CN CLICKSHARE SE T CN Chinese version of the ClickShare set R9861005EU CLICKSH ARE SET EU European version of the ClickShare set R9861005JP CLICKSHARE SET JP Japanese version of the Cl ickSha re set R9861 ...

  • Barco R5900006 - page 120

    13. O rder info 108 R5900006 CLICKSHA RE 04/12/2013 ...

  • Barco R5900006 - page 121

    14. Environ mental inf ormation 14. ENVIRONMENT AL INFORMA TION 14.1 Disposal informati on Disposal Information W aste Electrical and Electronic Equipment This symbol on the product indicates that, un der the European Directive 2012/19/EU governing waste from electrical and electronic equipment, this pr oduct must not be di sposed of with other mun ...

  • Barco R5900006 - page 122

    14. Environment al inform ation 底架 Cha ssis x 0 x 000 电 源供 应 器 Power Supply U nit x 0 x 000 文件 说 明 书 Paper Manuals 000000 O: 表示 该 有毒有害物 质 在 该 部件所有均 质 材料中的含量均 在 SJ/T 1 1363-2006 标 准 规 定的限量 要求以下 . O: Indicates that t his toxic or hazardous substance contai ...

  • Barco R5900006 - page 123

    Index INDEX A About 3, 13, 16, 19–20 Base U nit 16 Button 19 ClickShare product 13 Documentation 3 Service Guide 3 T ray 20 Access S SH 69 Access web interface 68 Adapter types 7 ClickShare Link 7 Address 1 10 Advanced use 40 Audio control 45 B Barco contact d ata 81 Base unit 23–25, 27 Installation 23–25, 27 Ceiling mounting 25 Met hods 2 3 ...

  • Barco R5900006 - page 124

    Index Status 69 Mobile Device 21 Support 21 O On-screen text format 62 Order info 107 Output ports 61 P Pa ir ing 92 Pairing Buttons 49 Passwo rd 80 Change 80 Plug types 6 ClickShare 6 Pre-install 50 Launcher service 50 Product 95 Maintenance 95 Production 1 10 R Rack mounting 27 Base unit 27 repacking 7 Retrieving 21 V ersion number of Bas e Unit ...

Fabricant Barco Catégorie Cell Phone Accessories

Les documents que nous recevons du fabricant de l'appareilBarco R5900006 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Barco
- manuels d’utilisations R5900006
- fiches produit Barco
- dépliants
- ou étiquettes-énergie Barco R5900006
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Barco R5900006.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Barco R5900006, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Barco R5900006. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Barco R5900006.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Barco R5900006, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Barco R5900006 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Barco R5900006.

Le manuel d’utilisation complet Barco, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Barco R5900006 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Barco R5900006, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lBarco R5900006 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Barco R5900006 - qui devraient nous aider dans les premières étapes lors de l'utilisation Barco R5900006
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Barco R5900006
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Barco R5900006 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Barco R5900006?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Barco R5900006, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Barco R5900006 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)