Manuel d’utilisation Barco 26-0702000-00

474 pages 9.37 mb
Télécharger

Aller à la page of 474

Summary
  • Barco 26-0702000-00 - page 1

    rëÉêÛë=dìáÇÉ cp k = p É êá Éë • Manual #: 26-0 702000-00 • Revision: 01 ...

  • Barco 26-0702000-00 - page 2

    2 FSN Series • User ’s Guide • Rev 01 cpk=pÉêáÉë== √ ==rëÉêÛë=dìáÇÉ `çéóêáÖÜí © Barco. March 31, 2010 All rights reserved. No pa rt of this docume nt may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a retr ieval system without the prior written consent of Barco. kç ...

  • Barco 26-0702000-00 - page 3

    FSN Series • User ’s Guide • Rev 01 3 agreed upon in the contract, al l guarantee claims of the purchaser will be rendered in valid. Not included in the guarantee coverage are system failures which are attribu ted to programs or special electronic circuitry prov id ed by the purchaser , e.g. interfaces. Normal wear as well as normal maintenan ...

  • Barco 26-0702000-00 - page 4

    4 FSN Series • User ’s Guide • Rev 01 léÉê~íçêë=p~ÑÉíó=pìãã~êó The general safety informa tio n in this summary is for operating personn el. aç=kçí=oÉãçîÉ=`çîÉêë=çê=m~åÉäë There are no user-serviceable parts within the unit. Removal of the top cover will expose dangerous voltages. T o avoid personal injury , ...

  • Barco 26-0702000-00 - page 5

    FSN Series • User ’s Guide • Rev 01 5 qÉêãë=få=qÜáë=j~åì~ä=~åÇ=bèìáéãÉåí=j~êâáåÖ= t^okfkd Highlights an operating procedure, practice, condit ion, statement, etc., wh ich, if not strictly observed, could result in injury to or death of personnel. `^rqflk The exclamation point within an equilateral tria ngle is intend ...

  • Barco 26-0702000-00 - page 6

    6 FSN Series • User ’s Guide • Rev 01 `Ü~åÖÉ=eáëíçêó The table below lists the changes to the FSN Series User ’s Guide. T able 0-1. Change History Rev Date ECP # Description Approved By 00 3/24/09 567874 FSN Series User ’s Guide R. Pellicano 01 3/31/10 577427 FSN Series User ’s Guide revisions: • New feature summary , e xpla ...

  • Barco 26-0702000-00 - page 7

    FSN Series • User ’s Guide • Rev 01 7 q~ÄäÉ=çÑ=`çåíÉåíë `Ü~éíÉê=N fåíêçÇìÅíáçå =K=K=K=K=K=K=K=K =K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=NT In This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Software Version . . . . . . . . . ...

  • Barco 26-0702000-00 - page 8

    8 FSN Series • User ’s Guide • Rev 01 Table of Contents Digital Video Effects Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Universal Output Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Native Aux Output Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Barco 26-0702000-00 - page 9

    FSN Series • User ’s Guide • Rev 01 9 Table of Conte nts External DSK Input Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 Native Input Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 Universal Input Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 Analo ...

  • Barco 26-0702000-00 - page 10

    10 FSN Series • User ’s Guide • Rev 01 Table of Contents Color Background Menu Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 Color Background Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 Color Background Selection . . . . . . . . . . . . . . . . . . . . . . . . 170 Color Chips . . . . . . . ...

  • Barco 26-0702000-00 - page 11

    FSN Series • User ’s Guide • Rev 01 1 1 Table of Conte nts Mapping Luma Keys and Linear Keys . . . . . . . . . . . . . . . . . 228 External DSK Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 External DSK Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230 DSK Cut Setup . . . . . . . . . . ...

  • Barco 26-0702000-00 - page 12

    12 FSN Series • User ’s Guide • Rev 01 Table of Contents `Ü~éíÉê=S póëíÉã=pÉíìé K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K=K OTV In This Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 279 Setup Prerequisites . . . . . . . . . . . . . . . . . ...

  • Barco 26-0702000-00 - page 13

    FSN Series • User ’s Guide • Rev 01 13 Table of Conte nts Transition LED Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327 Using Re-entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328 Working with Cuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Barco 26-0702000-00 - page 14

    14 FSN Series • User ’s Guide • Rev 01 Table of Contents Joystick Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361 DVE Menu Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 362 DVE Assign Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Barco 26-0702000-00 - page 15

    FSN Series • User ’s Guide • Rev 01 15 Table of Conte nts Tap in, Tap Out Examples. . . . . . . . . . . . . . . . . . . . . . . . . . 408 Mix KEY 1 and trigger KEY 2 . . . . . . . . . . . . . . . . 408 Mix BG, trigger KEY 1, mix- key-trigger KEY 2 . . . 409 Wipe-key-trigger KEY 1, wipe KEY 2 . . . . . . . . . . 409 `Ü~éíÉê=V jìäíáî? ...

  • Barco 26-0702000-00 - page 16

    16 FSN Series • User ’s Guide • Rev 01 Table of Contents Ethernet Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 441 Serial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 42 Tally Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Barco 26-0702000-00 - page 17

    FSN Series • User ’s Guide • Rev 01 17 N K==fåíê çÇìÅ íáçå få=qÜáë=`Ü~éíÉê This chapter is designed to introduce yo u to the FSN Series User ’s Guide. Areas to be covered are: • Software V ersion • Chapter Structure • How to Use This G uide • Conventions • Glossary of Switcher T er ms • About the FSN Series ? ...

  • Barco 26-0702000-00 - page 18

    18 FSN Series • User ’s Guide • Rev 01 NK==fåíêçÇìÅíáçå Software Version pçÑíï~êÉ=sÉêëáçå This version of the FSN Series User ’s Gu ide is based on software version 3.0. `Ü~éíÉê=píêìÅíìêÉ The following chapte rs provide instructions for all aspects of FSN Series operations: • Chapter 1 , “ Introductio ...

  • Barco 26-0702000-00 - page 19

    FSN Series • User ’s Guide • Rev 01 19 NK==fåíêçÇìÅíáçå How to Use This Guide eçï=íç=rëÉ=qÜáë=dìáÇÉ This section provides important tips for streamlining your use of this User’s Guide in its electronic “PDF” form. k~îáÖ~íáåÖ Use Acrobat Reader ’s “bookmarks” to navigate to the d esired location. All ...

  • Barco 26-0702000-00 - page 20

    20 FSN Series • User ’s Guide • Rev 01 NK==fåíêçÇìÅíáçå Glossary of Switcher Terms däçëë~êó=çÑ=pïáíÅÜÉê=qÉêãë= The following terms and abbre viations are used thro ugh out this guide: • 3G — A 3 Gbit/s serial digital 10-bit or 12-bit video interface (SMPTE 424M and 425M). • AUX (Auxiliary) Bus — AUX buses ...

  • Barco 26-0702000-00 - page 21

    FSN Series • User ’s Guide • Rev 01 21 NK==fåíêçÇìÅíáçå Glossary of Switcher Terms • DVE (Digital Video Effects) — A special effects generator with the ability to create PIP effects, reduce and enlarge images, create borders and shadows around those images, and create keyfra mes for motion paths. See PIP and Ke yframe for addit ...

  • Barco 26-0702000-00 - page 22

    22 FSN Series • User ’s Guide • Rev 01 NK==fåíêçÇìÅíáçå Glossary of Switcher Terms • NTSC — National T elevisi on S tandards Committee. The oldest standard for color picture broadcasting. NTSC is a standard definition format that operates at a frequency of 60Hz, with 525 lines, 60 fields an d 30 frames per second. • PA L — ...

  • Barco 26-0702000-00 - page 23

    FSN Series • User ’s Guide • Rev 01 23 NK==fåíêçÇìÅíáçå About the FSN Se ries ^Äçìí=íÜÉ=cpk=pÉêáÉë The following topics are discu ssed in this section: • Overview • Control Features • System Conf iguration lîÉêîáÉï The FSN Series integrates HD, SD and comput er sources in a professional multi-f orm at produ ...

  • Barco 26-0702000-00 - page 24

    24 FSN Series • User ’s Guide • Rev 01 NK==fåíêçÇìÅíáçå About the FSN Series `çåíêçä=cÉ~íìêÉë T wo different contr ol surf ac es are available for the FSN Seri e s: • The FSN-150 is a 1.5 M/E production swi tcher providing 20 assignable crosspoints (10 buttons plus SHIFT ). Figure 1-1. FSN-150 Control Panel • The FS ...

  • Barco 26-0702000-00 - page 25

    FSN Series • User ’s Guide • Rev 01 25 NK==fåíêçÇìÅíáçå About the FSN Se ries póëíÉã=`çåÑáÖìê~íáçå The following topics are discu ssed in this section: • Basic FSN Serie s System • Required Cards • Optional Cards • M/E Features _~ëáÅ=cpk=pÉêáÉë = póëíÉã Because the FSN Series uses modular compon ...

  • Barco 26-0702000-00 - page 26

    26 FSN Series • User ’s Guide • Rev 01 NK==fåíêçÇìÅíáçå About the FSN Series léíáçå~ä=`~êÇë Optional FSN Series cards are describ ed below . • NIC (Native Input Card) The NIC provides eight native video i nput c hannels, which run at the switcher's selected native output resolution. In Chapter 2, refer to the “ Na ...

  • Barco 26-0702000-00 - page 27

    FSN Series • User ’s Guide • Rev 01 27 NK==fåíêçÇìÅíáçå New Feature Revi ew kÉï=cÉ~íìêÉ=oÉîáÉï The following topics are discu ssed in this section: • V ersion 3.0 Features sÉêëáçå=PKM=cÉ~íìêÉë This section lists the ne w hardware and soft ware features that have been impl emented in the FSN Series version ...

  • Barco 26-0702000-00 - page 28

    28 FSN Series • User ’s Guide • Rev 01 NK==fåíêçÇìÅíáçå New Feature Review • M/E 2 Control V ersion 2.0 supports control of M/E 2 fr om th e FSN-150. All M/E 2 o utputs on the FSN-1400 are active, a new M/E Setup Menu is provide d, and the M/E 2 button in the Memory Section is active. In Chapter 5, refer to the “ Other Se tup M ...

  • Barco 26-0702000-00 - page 29

    FSN Series • User ’s Guide • Rev 01 29 NK==fåíêçÇìÅíáçå New Feature Revi ew • Additional T est Pattern The SMPTE RP-219 test pattern has been added to the Output T est Patterns Menu . • Menu Enhancements The following menus have been enhanced with new features: ~ Wipe M en u — In Chapter 5, refer to the “ Wipe Men u ” sec ...

  • Barco 26-0702000-00 - page 30

    30 FSN Series • User ’s Guide • Rev 01 NK==fåíêçÇìÅíáçå Connectivity Diagrams `çååÉÅíáîáíó=aá~Öê~ãë The following connectivity di agrams are provid ed in this section: • System 1 — Basic • System 2 — Multiple De stinations póëíÉã=N=Ô=_~ëáÅ The figure below illustra tes a basic FSN Series system: Fig ...

  • Barco 26-0702000-00 - page 31

    FSN Series • User ’s Guide • Rev 01 31 NK==fåíêçÇìÅíáçå Connectivity Diagrams póëíÉã=O=Ô=jìäíáéäÉ=aÉëíáå~íáçåë The figure below illustrates a sample system in which in dividual Aux outputs are routed to different destinations. Figure 1-4. Block diagram, multiple destinati on FSN Series system (sample) This co ...

  • Barco 26-0702000-00 - page 32

    32 FSN Series • User ’s Guide • Rev 01 NK==fåíêçÇìÅíáçå Application Questions ^ééäáÅ~íáçå=nìÉëíáçåë At Barco, we take pride in offering unique so lutions to demanding technical problems. If you have appli cation questions, re quire further information or wo uld like to di scuss your application requi rements in mor ...

  • Barco 26-0702000-00 - page 33

    FSN Series • User ’s Guide • Rev 01 33 OK==c p kJN QMM=lê áÉ åí ~íáçå få=qÜáë=`Ü~éíÉê This chapter provides d etailed explanations of the FSN-1400 chassis, including all front and rear chassis cards. The following topics are discu ssed: • Hardware Description • Card Descriptions • Card LEDs • Analog Format Co nn ecti ...

  • Barco 26-0702000-00 - page 34

    34 FSN Series • User ’s Guide • Rev 01 2. FSN-1400 Orientation Hardware Description e~êÇï~êÉ=aÉëÅêáéíáçå The following topics are discu ssed in this section: • Chassis Overview • Card Slot Allo cation and System Flexibility • Chassis Front Door • Chassis Front • Chassis Rear `Ü~ëëáë=lîÉêîáÉï The FSN Series ...

  • Barco 26-0702000-00 - page 35

    FSN Series • User ’s Guide • Rev 01 35 2. FSN-1400 Orientation Hardware Description `~êÇ=päçí=^ääçÅ~íáçå=~åÇ=póëíÉã=cäÉñáÄáäáíó Within the FSN-1400 chassis, two card slots are dedicated ( System a nd M/E ). The allocation of the remaining slots is flexible, as illustrated in the following table. Because di fferen ...

  • Barco 26-0702000-00 - page 36

    36 FSN Series • User ’s Guide • Rev 01 2. FSN-1400 Orientation Hardware Description ^ìñáäá~êó=lìíéìí=cäÉñáÄáäáíó The following two tables outline the system’s auxiliary output flexibility , based on the number of 2-channel UOC cards installed, the number of 8-channel NAC cards installed, and whether or not the MVR is i ...

  • Barco 26-0702000-00 - page 37

    FSN Series • User ’s Guide • Rev 01 37 2. FSN-1400 Orientation Hardware Description `Ü~ëëáë=cêçåí=aççê The figure below illustra tes a vi ew of the chassis front door: Figure 2-1. FSN Series chassis front door Following are descriptions of each section. 1) Door Latch One latch is provided to facilitate door opening and closin g. S ...

  • Barco 26-0702000-00 - page 38

    38 FSN Series • User ’s Guide • Rev 01 2. FSN-1400 Orientation Hardware Description The Video Refe ren ce LED indicates the status of the system’s analog video reference input, via the Vid Re f connector on the System Card ’s rear panel. ~ Green = the system is configured for External Reference , a video reference signal is present and th ...

  • Barco 26-0702000-00 - page 39

    FSN Series • User ’s Guide • Rev 01 39 2. FSN-1400 Orientation Hardware Description `Ü~ëëáë=cêçåí The figure below illustra tes a sample front view of a fully-loaded chassis (door removed): Figure 2-2. FSN Series chassis, front view (sample) Following are descriptions of each section. Note that slots are numbered from right to left, ...

  • Barco 26-0702000-00 - page 40

    40 FSN Series • User ’s Guide • Rev 01 2. FSN-1400 Orientation Hardware Description 2) Fan T ray For chassis coolin g, one slot i s provided for th e require d hot-swappable fan tray . The integral handle enables the tra y to be easi ly removed and installed. 3) System Card Slot Slot 14 is reserved for the required System Card . Refer to the ...

  • Barco 26-0702000-00 - page 41

    FSN Series • User ’s Guide • Rev 01 41 2. FSN-1400 Orientation Hardware Description `Ü~ëëáë=oÉ~ê The figure below illustra tes a rear view of the FSN Series chassis, with all slots fully loa ded with both required and optional panels: Figure 2-3. Sample FSN Series c hassis, rear view In the descriptions below , slots are numbered from ...

  • Barco 26-0702000-00 - page 42

    42 FSN Series • User ’s Guide • Rev 01 2. FSN-1400 Orientation Hardware Description ~ UIC panels. Up to five panels can be installed in slots 3 through 7. Refer to the “ Universal Input Card ” section on p age 55 for details. 3) M/E Card Panel Slot 8 is reserved for the required M/E card panel. Refer to the “ M/E Card ” section on pag ...

  • Barco 26-0702000-00 - page 43

    FSN Series • User ’s Guide • Rev 01 43 2. FSN-1400 Orientation Card Descriptions `~êÇ=aÉëÅêáéíáçåë The following required an d optional cards are discussed in this section: • System Card • M/E Card • Native Input Card • Universal Input Card • Digital V ideo Effects Card • Universal Outpu t Card • Native Aux Output C ...

  • Barco 26-0702000-00 - page 44

    44 FSN Series • User ’s Guide • Rev 01 2. FSN-1400 Orientation Card Descriptions póëíÉã=`~êÇ  Card status: Required  Slot number: 14  Maximum number of cards per chassis: 1 The System Card provides the fol lowing functions: • System control, CPU, timing, and video reference (inpu t, loop and output). • Ethernet port 10/100 ...

  • Barco 26-0702000-00 - page 45

    FSN Series • User ’s Guide • Rev 01 45 2. FSN-1400 Orientation Card Descriptions Following are descriptions of all compo nents on the fron t ed ge of the System card: 1) System Power LED The System Power LED indicate s power status for the chassis and the cards. ~ Green = all system power is OK. ~ Red = one or more of the following conditions ...

  • Barco 26-0702000-00 - page 46

    46 FSN Series • User ’s Guide • Rev 01 2. FSN-1400 Orientation Card Descriptions 8) IP Address Reset Switch Using a small tool such as a paper clip, press the IP Address Reset Switch for 5 (five) seconds. This action resets the chassis IP address to the default value of 192.168.0.4 , and then performs a factory reset. Please note: ~ This is t ...

  • Barco 26-0702000-00 - page 47

    FSN Series • User ’s Guide • Rev 01 47 2. FSN-1400 Orientation Card Descriptions 12) Loop One BNC connector is provided fo r a reference Lo op connection, which enab les you to loop the incoming reference signal to the next device in your system. If the reference Loop is not used, connect a 75 ohm terminator to the connector . 13) Ref Out One ...

  • Barco 26-0702000-00 - page 48

    48 FSN Series • User ’s Guide • Rev 01 2. FSN-1400 Orientation Card Descriptions cpk=pÉêáÉë=bíÜÉêåÉí=`çååÉÅíáçåë This section provid es information on all FSN Series Ethernet conn ecti ons. Figure 2-6. Basic system Ethernet diagram • FSN-1400 The FSN-1400 has a single Ethernet p ort located on th e System card. This po ...

  • Barco 26-0702000-00 - page 49

    FSN Series • User ’s Guide • Rev 01 49 2. FSN-1400 Orientation Card Descriptions jLb=`~êÇ  Card status: Required  Slot number: 8  Maximum number of cards per chassis: 1 The M/E (M i x/Effec ts) Card provides the following fu nct ions: • Dedicated DSK cut and fill inpu ts. These must be locked to video reference. • Four PGM/PVW ...

  • Barco 26-0702000-00 - page 50

    50 FSN Series • User ’s Guide • Rev 01 2. FSN-1400 Orientation Card Descriptions Following are descriptions of all M/E card components: 1) Ejectors Use the card’s top and bottom Ejectors to remove (and re-insert) the card. 2) Card Power LED The Card Power LED indicates power status for the card. Refer to the “ Card LEDs ” section on pag ...

  • Barco 26-0702000-00 - page 51

    FSN Series • User ’s Guide • Rev 01 51 2. FSN-1400 Orientation Card Descriptions 13) DSK Cut In One BNC is provided for a dedi cated DSK Cut Input . The DSK Cut and DSK Fill inputs must be locked to the FSN-1400 video reference within ± 0.5 lines, when the {Output V -Lock} button is turned off (on the Refe r e nc e an d Output Setup Menu ). ...

  • Barco 26-0702000-00 - page 52

    52 FSN Series • User ’s Guide • Rev 01 2. FSN-1400 Orientation Card Descriptions `äÉ~å=cÉÉÇ=lìíéìí=pÉäÉÅíáçå The FSN-1400 provid es three Clean Feed Outputs , one each for the PGM, M/E 1 and M/E 2 banks. Each output has selectable points from which the clean feed signal can be picked, as illustrated in the followi ng diagra ...

  • Barco 26-0702000-00 - page 53

    FSN Series • User ’s Guide • Rev 01 53 2. FSN-1400 Orientation Card Descriptions k~íáîÉ=fåéìí=`~êÇ  Card status: Optiona l  Installs in slot s: 1 - 4  Default sl ot: 1  Maximum number of cards per chassis: 4 The NIC (Native Input Card) is an eight-channel in put card that provi des th e following: • Eight native resolu ...

  • Barco 26-0702000-00 - page 54

    54 FSN Series • User ’s Guide • Rev 01 2. FSN-1400 Orientation Card Descriptions 2) Card Power LED The Card Power LED indicates power status for the card. Refer to the “ Card LEDs ” section on page 64 for de tails. 3) Loaded LED The Loaded LED indicates the status of all FPGAs on the card. Refer to the “ Card LEDs ” section on page 64 ...

  • Barco 26-0702000-00 - page 55

    FSN Series • User ’s Guide • Rev 01 55 2. FSN-1400 Orientation Card Descriptions råáîÉêë~ä=fåéìí=`~êÇ  Card status: Optiona l  Installs in slot s: 3 - 7  Default sl ot: 7  Maximum number of cards per chassis: 5 The UIC (Universal Input Card) is a two-ch annel card that scales non-native inpu ts (up to UXGA or 1920 x 1 ...

  • Barco 26-0702000-00 - page 56

    56 FSN Series • User ’s Guide • Rev 01 2. FSN-1400 Orientation Card Descriptions 2) Card Power LED The Card Power LED indicates power status for the card. Refer to the “ Card LEDs ” section on page 64 for de tails. 3) Loaded LED The Loaded LED indicates the status of all FPGAs on the card. Refer to the “ Card LEDs ” section on page 64 ...

  • Barco 26-0702000-00 - page 57

    FSN Series • User ’s Guide • Rev 01 57 2. FSN-1400 Orientation Card Descriptions aáÖáí~ä=sáÇÉç=bÑÑÉÅíë=`~êÇ  Card status: Optiona l  Installs in slot s: 9 , 10  Maximum number of cards per chassis: 2 The DVE (Digit al Video Effect s) card is an optional 2-D two-chann el scaler card. When one or two DVE cards are inst ...

  • Barco 26-0702000-00 - page 58

    58 FSN Series • User ’s Guide • Rev 01 2. FSN-1400 Orientation Card Descriptions råáîÉêë~ä=lìíéìí=`~êÇ  Card status: Optiona l  Installs in slot s: 11 , 12 , 13  Default sl ot: 12  Maximum number of cards per chassis: 3 The UOC (Universal Ou tp ut Card) is an optional two-channel scaler card that creates scaled video ...

  • Barco 26-0702000-00 - page 59

    FSN Series • User ’s Guide • Rev 01 59 2. FSN-1400 Orientation Card Descriptions 3) Loaded LED The Loaded LED indicates the status of all FPGAs on the card. Refer to the “ Card LEDs ” section on page 64 for details. 4) Universal Outpu t 1 Three connectors are provided for Universal Outpu t 1 : ~ 1 x HD15 ~ 1 x DVI-I ~ 1 x BNC Using these ...

  • Barco 26-0702000-00 - page 60

    60 FSN Series • User ’s Guide • Rev 01 2. FSN-1400 Orientation Card Descriptions k~íáîÉ=^ìñ=lìíéìí=`~êÇ  Card status: Optiona l  Installs in slot s: 11 , 12 , 13  Default sl ot: 13  Maximum number of cards per chassis: 3 The NAC (Native Aux Output Card) is an optional card that provides eight additional auxiliary outp ...

  • Barco 26-0702000-00 - page 61

    FSN Series • User ’s Guide • Rev 01 61 2. FSN-1400 Orientation Card Descriptions Following are descriptions of all NAC compo nents: 1) Ejectors Use the card’s top and bottom Ejectors to remove (and re-insert) the card. 2) Card Power LED The Card Power LED indicates power status for the card. Refer to the “ Card LEDs ” section on page 64 ...

  • Barco 26-0702000-00 - page 62

    62 FSN Series • User ’s Guide • Rev 01 2. FSN-1400 Orientation Card Descriptions jìäíáîáÉïÉê=`~êÇ  Card status: Optiona l  Installs in slot: 11  Maximum number of cards per chassis: 1 The MVR (Multivie wer) is an optional card th at provides the ability to display up to 16 source PIPs in both single and dual monitor confi ...

  • Barco 26-0702000-00 - page 63

    FSN Series • User ’s Guide • Rev 01 63 2. FSN-1400 Orientation Card Descriptions 4) MVR Output 1 In order to provide multiviewer connections to both SDI and DVI compatible monitors, two connectors are provided for MVR Output 1 : ~ 1 x DVI-I ~ 1 x BNC The same output signal appears on both th e DVI-I a nd BNC connectors. MVR Output 1 can be us ...

  • Barco 26-0702000-00 - page 64

    64 FSN Series • User ’s Guide • Rev 01 2. FSN-1400 Orientation Card LEDs `~êÇ=ibaë On the front edge o f all cards, two LEDs indicate the card’s FPGA and power status. Figure 2-15. Card front edge LEDs Following are descriptions of the two LEDs: 1) Card Power LED The Card Power LED indicates power status for the card. ~ Green = card powe ...

  • Barco 26-0702000-00 - page 65

    FSN Series • User ’s Guide • Rev 01 65 2. FSN-1400 Orientation Analog Format Connection Tab le ^å~äçÖ=cçêã~í=`çååÉÅíáçå=q~ÄäÉ Each HD-15 analog conn ector on both th e UIC and UOC enab les you to input (or o utput) a variety of video formats — including VGA, composite video, S-Video and YUV component video. • For RGB w ...

  • Barco 26-0702000-00 - page 66

    66 FSN Series • User ’s Guide • Rev 01 2. FSN-1400 Orientation Analog Format Connection Table ...

  • Barco 26-0702000-00 - page 67

    FSN Series • User ’s Guide • Rev 01 67 PK==`çåíê ç ä=m ~åÉä=lê áÉåí ~íáçå få=qÜáë=`Ü~éíÉê This chapter provides a detailed explanation of th e FSN-150 control panel. The following topics are discussed: • Control Panel Descriptio ns • Control Panel Rear • Control Panel Bottom • T ouch Scre en Co nnector Panel ...

  • Barco 26-0702000-00 - page 68

    68 FSN Series • User ’s Guide • Rev 01 3. Control Panel Orientation Control Panel Descriptio ns `çåíêçä=m~åÉä=aÉëÅêáéíáçåë The following topics are discu ssed in this section: • FSN-150 Overview • FSN-150 Control Panel Sectio ns • Functional Contro l Panel Sections cpkJNRM=lîÉêîáÉï The figures below provide si ...

  • Barco 26-0702000-00 - page 69

    FSN Series • User ’s Guide • Rev 01 69 3. Control Panel Orientation Control Panel Descrip tions FSN-150 features include: • S tandard video production switcher "look and feel." • 1.5 M/E overall design: ~ Bus rows consist of 20 assignable buttons (10 buttons plus SHIFT , Black and re-entry). ~ 1 M/E plus a separate PGM bank. ~ P ...

  • Barco 26-0702000-00 - page 70

    70 FSN Series • User ’s Guide • Rev 01 3. Control Panel Orientation Control Panel Descriptio ns cpkJNRM=`çåíêçä=m~åÉä=pÉÅíáçåë The figure below illustra tes the FSN-150 front panel: Figure 3-3. FSN-150 Control Panel The FSN-150 provide s bus rows with 20 assigna ble buttons (10 buttons plus SHIF T ) in a compact 1.5 M/E design ...

  • Barco 26-0702000-00 - page 71

    FSN Series • User ’s Guide • Rev 01 71 3. Control Panel Orientation Control Panel Descrip tions 3) PGM T ransition Section For the switcher ’s primary output, the PGM T ransition Section enables you to perform manual or automatic cuts, mixes, wipes and a DSK (downstream key). A downstream “fade to black” is also provided. Refer to the ? ...

  • Barco 26-0702000-00 - page 72

    72 FSN Series • User ’s Guide • Rev 01 3. Control Panel Orientation Control Panel Descriptio ns cìåÅíáçå~ä=`çåíêçä=m~åÉä=pÉÅíáçåë The following topics are discu ssed in this section: • Display Section • PGM Bank • PGM T ransition Section • M/E Bank • M/E T ransition Section • Aux Section • Custom Control ...

  • Barco 26-0702000-00 - page 73

    FSN Series • User ’s Guide • Rev 01 73 3. Control Panel Orientation Control Panel Descrip tions aáëéä~ó=pÉÅíáçå The figure below illustra tes the Display Section : Figure 3-4. Display Section (with sample menu) The Display Sect ion provides the controls for adjusti ng system p arameters. The display itself can be mounted in a varie ...

  • Barco 26-0702000-00 - page 74

    74 FSN Series • User ’s Guide • Rev 01 3. Control Panel Orientation Control Panel Descriptio ns mdj=_~åâ The PGM Bank is the switcher ’s top video layer . The bank include s two physical buses ( PGM and PST ), and one “phantom” KEY bus. T ogether , these buses are the switcher ’s primary location where you cut your program and trans ...

  • Barco 26-0702000-00 - page 75

    FSN Series • User ’s Guide • Rev 01 75 3. Control Panel Orientation Control Panel Descrip tions 2) Program Bus The Program Bus ( PGM ) is the bank’s bottom layer , which is used to select the switcher ’s primary output video. Please note: ~ Except for SHIFT , all buttons on the PGM Bus are mutually exclusi ve, including the re-entry butto ...

  • Barco 26-0702000-00 - page 76

    76 FSN Series • User ’s Guide • Rev 01 3. Control Panel Orientation Control Panel Descriptio ns mdj=qê~åëáíáçå=pÉÅíáçå The PGM T ransition Section provides controls for creating the switcher’s primary outpu t, using cuts, mixes, wipes, a downstream key and a downstream “fade to black.” The figure below shows the PGM T rans ...

  • Barco 26-0702000-00 - page 77

    FSN Series • User ’s Guide • Rev 01 77 3. Control Panel Orientation Control Panel Descrip tions ~ DSK Source — (directly above the DSK button), indicates the curren t source assigned to the downstream keyer. When you select an other source on the Phantom Key Bus , the source label updates. ~ Current T ransition Rate — indicates the auto-t ...

  • Barco 26-0702000-00 - page 78

    78 FSN Series • User ’s Guide • Rev 01 3. Control Panel Orientation Control Panel Descriptio ns For exampl e : S If BG and DSK are currently lit, pressing BG turns the BG button on, and turns the DSK button off. S If DSK is currently lit, pressing BG and DSK turns the BG and DSK buttons on. Following are descriptions of each button in the Nex ...

  • Barco 26-0702000-00 - page 79

    FSN Series • User ’s Guide • Rev 01 79 3. Control Panel Orientation Control Panel Descrip tions 4) Effects Group The two butt on s in the Effect s Group indicate which effect s are armed for the next transition in the PGM bank. Figure 3-10. Ef fects Group T o use the group, press th e button for the transition you want to enab le. Note that M ...

  • Barco 26-0702000-00 - page 80

    80 FSN Series • User ’s Guide • Rev 01 3. Control Panel Orientation Control Panel Descriptio ns S BG + WIPE enabled — press AUTO TRAN to wipe from PGM to PST . S DSK + MIX enabled — press AUTO TRAN to mix the DSK on or off. S BG + DSK + MIX enabled — press AUTO TRAN to mix from PGM to PST , and simultaneously mix the DSK on or off. Pres ...

  • Barco 26-0702000-00 - page 81

    FSN Series • User ’s Guide • Rev 01 81 3. Control Panel Orientation Control Panel Descrip tions jLb=_~åâ An M/E bank is essentially a video layer which, in combination with othe r switcher banks, enables you to create the overall “look” of your program. Please note: • Three buses are provided for selecting sources: BG , PST and KEY . ...

  • Barco 26-0702000-00 - page 82

    82 FSN Series • User ’s Guide • Rev 01 3. Control Panel Orientation Control Panel Descriptio ns ~ If an error occurs to either the shifted or unshifted input, the associated Programmable Display turns red. In Chapter 7, refer to the “ Understanding Error Messages ” secti on on page 316 for full details. 2) Key Bus The Key Bus is the M/E? ...

  • Barco 26-0702000-00 - page 83

    FSN Series • User ’s Guide • Rev 01 83 3. Control Panel Orientation Control Panel Descrip tions jLb=qê~åëáíáçå=pÉÅíáçå The M/E T ransition Section provides the controls for creat ing transitions such as cuts, mixes, wipes, keys and PIP ef fects. T he figure below illustrates the section: Figure 3-12. M/E T ransition Section (sam ...

  • Barco 26-0702000-00 - page 84

    84 FSN Series • User ’s Guide • Rev 01 3. Control Panel Orientation Control Panel Descriptio ns ~ Key 1 Source an d DVE trigger st atus — this field is located directly above the KEY 1 button. The following indications are provid ed: • In key mode, the top line is the field title: KEY1 . The botto m line displays the source assigned to th ...

  • Barco 26-0702000-00 - page 85

    FSN Series • User ’s Guide • Rev 01 85 3. Control Panel Orientation Control Panel Descrip tions 3) Next T r ansition Group The three buttons in the Next T ransi tion Group indicate which combination of layers is armed for the next transition. The state of these butt ons affects the M/E’ s “lookahead” pr eview output. Figure 3-15. Next T ...

  • Barco 26-0702000-00 - page 86

    86 FSN Series • User ’s Guide • Rev 01 3. Control Panel Orientation Control Panel Descriptio ns ~ All transition and arm capabilities for KEY 2 are identical to those for KEY 1 — but apply to KEY 2 instead. The DVE prerequisites are also identical — a DVE chan nel must be assigned to KEY 2 and a two- keyframe DVE effect must be loaded. Th ...

  • Barco 26-0702000-00 - page 87

    FSN Series • User ’s Guide • Rev 01 87 3. Control Panel Orientation Control Panel Descrip tions When pressed by themselves, MIX , WIPE an d FX TRIG are mutually exclusive : ~ Press MIX to select a mix effec t only . ~ Press WIPE to select a wipe ef fect only . ~ Press FX TRIG to select an ef fects trigger only . KEY 1 an d/or KEY 2 must be en ...

  • Barco 26-0702000-00 - page 88

    88 FSN Series • User ’s Guide • Rev 01 3. Control Panel Orientation Control Panel Descriptio ns keyframe 2 to 1. Single keyframe DVE effects can only be mixed or wiped up or down — they cannot be triggered. Because DVE channels are a ssigned to keyers, there a re three ways that you can work with two-keyframe DVE effect s: • Mix or wipe o ...

  • Barco 26-0702000-00 - page 89

    FSN Series • User ’s Guide • Rev 01 89 3. Control Panel Orientation Control Panel Descrip tions S KEY 1 + MIX enab led — press AUTO TRAN to mix Key 1 on or off. S BG + KEY 2 + MIX enabled — press AUTO TRAN to mix from BG to PST , and simultaneously mix Key 2 on or off. S KEY 1 + KEY 2 + WIPE enabled — press AUTO TRAN to wipe Key 1 and K ...

  • Barco 26-0702000-00 - page 90

    90 FSN Series • User ’s Guide • Rev 01 3. Control Panel Orientation Control Panel Descriptio ns ~ Press CUT KEY 2 to immediately cut Key 2 fully on or off Please note the following important points regarding the Direct Control buttons: ~ Unlike the AUTO TRANS button, the two MIX KEY buttons cannot be paused. Once pressed, the transition compl ...

  • Barco 26-0702000-00 - page 91

    FSN Series • User ’s Guide • Rev 01 91 3. Control Panel Orientation Control Panel Descrip tions ^ìñ=pÉÅíáçå An Aux output is essenti ally a destination — a lo cation to which you want to route a source. Examples of Aux destinations are monitors, VTRs, projectors, etc. The Aux Section enables you to perform the following functions: ? ...

  • Barco 26-0702000-00 - page 92

    92 FSN Series • User ’s Guide • Rev 01 3. Control Panel Orientation Control Panel Descriptio ns 2) Aux Source Row The Aux Source Row provides all the sources available on the switcher ’s main buses, plus dedicated buttons for the switcher ’s PGM and M/E outputs. When you select a source, it is routed to the output selected on the Aux Outp ...

  • Barco 26-0702000-00 - page 93

    FSN Series • User ’s Guide • Rev 01 93 3. Control Panel Orientation Control Panel Descrip tions `ìëíçã=`çåíêçä=pÉÅíáçå The Custom Control Section provides groups of buttons that can be programmed to perform various switcher functions such as accessing menus, running ma cro s, running “system” functions and triggering GPOs ...

  • Barco 26-0702000-00 - page 94

    94 FSN Series • User ’s Guide • Rev 01 3. Control Panel Orientation Control Panel Descriptio ns jÉãçêó=pÉÅíáçå The Memory Section enables you to store switcher setups to memory , and recall setups from memory back to the pa nel. One thousand registers are provided (1 throug h 1000). In Chapter 7, refer to th e “ Working with Memo ...

  • Barco 26-0702000-00 - page 95

    FSN Series • User ’s Guide • Rev 01 95 3. Control Panel Orientation Control Panel Descrip tions ~ If you pr ess CLEAR , the approp riate register clears and a dash appears. However , the function (store or recall) remains active, along with the selected modules. ~ If you turn off the STORE or RECALL button prior to pressing ENTER , you effect ...

  • Barco 26-0702000-00 - page 96

    96 FSN Series • User ’s Guide • Rev 01 3. Control Panel Orientation Control Panel Descriptio ns ~ Enable M/E 2 to include the entire M/E 2 bank in a store procedure, or remove the bank from a recall procedure. Using the Memory Menu , you can elect to include or exclude certain sub-sections of M/E 2. ~ Enable PGM to include the entire PGM bank ...

  • Barco 26-0702000-00 - page 97

    FSN Series • User ’s Guide • Rev 01 97 3. Control Panel Orientation Control Panel Descrip tions parallel with the T ouch Screen ’s keypad — either one can be used for entry , depending on your preference. Following are descriptions of each Keypad button: ~ The AUTO TRAN button is not available in version 3.0. ~ Press BACKSP ACE ( ← ) du ...

  • Barco 26-0702000-00 - page 98

    98 FSN Series • User ’s Guide • Rev 01 3. Control Panel Orientation Control Panel Descriptio ns ~ Use the decimal button ( . ) for numeri c entries that accept decimal values. ~ Press ENTER to complete a store, recall, or numeric entry function. For store and recall functions, once pressed , th e selected modules are stored to memory or recal ...

  • Barco 26-0702000-00 - page 99

    FSN Series • User ’s Guide • Rev 01 99 3. Control Panel Orientation Control Panel Rear `çåíêçä=m~åÉä=oÉ~ê= The figure below illustra tes the rear of the control panel: Figure 3-24. Control Panel Rear Following are descriptions of each rear panel connector: 1) Light Conn ectors One XLR Connecto r is provided on each side of the rear ...

  • Barco 26-0702000-00 - page 100

    100 FSN Series • User ’s Guide • Rev 01 3. Control Panel Orientation Control Panel Rear 6) DVI Connector One DVI connector is p rovided to connect the control panel to th e T ouch Screen . Use the supplied cable harness for interconnection. In Appendix A, refer to the “ DVI-I Connector ” section on page 440 for p inout details. 7) CPU Swi ...

  • Barco 26-0702000-00 - page 101

    FSN Series • User ’s Guide • Rev 01 101 3. Control Panel Orientation Control Panel Bottom `çåíêçä=m~åÉä=_çííçã The figure below illustra tes the botto m surface of the control panel: Figure 3-25. Control Panel bottom surface Following are descriptions of eac h bo ttom su rface component: 1) Access Plate One Access Plat e is prov ...

  • Barco 26-0702000-00 - page 102

    102 FSN Series • User ’s Guide • Rev 01 3. Control Panel Orientation Touch Screen Connector Panel qçìÅÜ=pÅêÉÉå=`çååÉÅíçê=m~åÉä The figure below illustra tes the conn ector panel on the bottom of the T ouch Screen : Figure 3-26. T ouch Screen Connector Panel Following are descriptions of each connector: 1) USB Port One USB ...

  • Barco 26-0702000-00 - page 103

    FSN Series • User ’s Guide • Rev 01 103 QK==fåëí ~ää~íáçå få=qÜáë=`Ü~éíÉê This chapter provides d etailed instructions for installing FSN Series hardware. The following topics are discussed: • Safety Precautions • Shipping Information • Unpacking and Inspection • Site Prep aration • Cable and Ad ap ter Information ...

  • Barco 26-0702000-00 - page 104

    104 FSN Series • User ’s Guide • Rev 01 4. Installation Safety Precautions p~ÑÉíó=mêÉÅ~ìíáçåë= For all FSN Series installation procedures , observe the followin g important safety and handling rules to avoid damage to yourself and the equipment: • T o protect users from electric shock, ensu re that the power suppl ies for each ...

  • Barco 26-0702000-00 - page 105

    FSN Series • User ’s Guide • Rev 01 105 4. Installation Site Preparation páíÉ=mêÉé~ê~íáçå= The environment in which you install your FSN Se ries switcher should be clean, properly lit, free from static, and have adequate power , ventilation, and space for all components. `~ÄäÉ=~åÇ=^Ç~éíÉê=fåÑçêã~íáçå The tables b ...

  • Barco 26-0702000-00 - page 106

    106 FSN Series • User ’s Guide • Rev 01 4. Installation Control Panel Installatio n `çåíêçä=m~åÉä=fåëí~ää~íáçå The figure below illustra tes a simplified diagram of the Control Panel ’s rear connectors, and the required cabling. Use this figure for reference during installati on. Figure 4-1. Control Panel Installation  ...

  • Barco 26-0702000-00 - page 107

    FSN Series • User ’s Guide • Rev 01 107 4. Installation Touch Screen Installation 5. Connect th e su pp l i ed AC Power Cord to the AC connector on the rear of the Control Panel , and then to an AC outl et. qçìÅÜ=pÅêÉÉå=fåëí~ää~íáçå The figure below illustra tes a simplified rear view of the T ouch Scre e n and the supplied ...

  • Barco 26-0702000-00 - page 108

    108 FSN Series • User ’s Guide • Rev 01 4. Installation Touch Screen Installation 3. Place the T ouch Screen face down on a table (careful of the knobs), and connect the USB , DVI-D and 12V DC cables to their respective connectors on the T ouch Screen ’s connector panel. Figure 4-3. T ouch Screen Connectors 4. Lift the T ouch Screen , then ...

  • Barco 26-0702000-00 - page 109

    FSN Series • User ’s Guide • Rev 01 109 4. Installation Display Mount Options aáëéä~ó=jçìåí=léíáçåë The FSN Series’ T ouch Screen display includes a standard VESA mount. A basic desk stand is provided with the syst em, but if desired, you can purchase your own VESA mount articulated monitor arm, such as the sa mple shown belo ...

  • Barco 26-0702000-00 - page 110

    1 10 FSN Series • User ’s Guide • Rev 01 4. Installation FSN-1400 Rack-Mount Procedure cpkJNQMM=o~ÅâJjçìåí=mêçÅÉÇìêÉ The FSN-1400 chassis is designed to be rack mounted and is suppli ed with front rack- mount hardware. Please note the follow ing important points: • The FSN-1400 is 6RU in height. • When rack mounting the unit ...

  • Barco 26-0702000-00 - page 111

    FSN Series • User ’s Guide • Rev 01 1 1 1 4. Installation FSN-1400 Rack-Mount Procedure 3. T o facilitate easy rack mounting, each rack ear on the front of the FSN-1400 is equipped with a special “keyhole ” slo t on the lower hole, as shown below . Figure 4-7. Rack Ear Keyhole T o take advantage of this feature, ensure that there is at le ...

  • Barco 26-0702000-00 - page 112

    1 12 FSN Series • User ’s Guide • Rev 01 4. Installation FSN-1400 System Connections cpkJNQMM=póëíÉã=`çååÉÅíáçåë The figure below illustra tes the connections on the System card ’s rear p anel, plus the power connections. Use this figure for reference during installation. Figure 4-9. System card and power connections  Use ...

  • Barco 26-0702000-00 - page 113

    FSN Series • User ’s Guide • Rev 01 113 4. Installation FSN-1400 System Connecti ons 3. (Recommended) Using a BNC cable, conn ect an analog reference video in put to the Ref In connector . This connection enables you to genlock the FSN Series to an external reference. ~ Accepted signals are black bu rst, SMPTE bi-level sync and tri-level sync ...

  • Barco 26-0702000-00 - page 114

    1 14 FSN Series • User ’s Guide • Rev 01 4. Installation FSN-1400 System Connections 8. Connect th e su pp l i ed AC Power Cord (s) to the AC connectors on the rear of the FSN-1400, and then to AC outlet(s). ~ If a power supply is installed in the top slot, use AC Connector 1 . ~ If a power supply is installed in the bottom slot, use AC Conne ...

  • Barco 26-0702000-00 - page 115

    FSN Series • User ’s Guide • Rev 01 115 4. Installation FSN-1400 System Connecti ons mçïÉê=`çêÇLiáåÉ=sçäí~ÖÉ=pÉäÉÅíáçå The FSN-1400 is rated to operate with the following spe ci fi cations: • Input Power : 100-240 V AC, 50-60 Hz • Power Consumptio n : 800 watts maximum The FSN-150 is rated to operate with the follow ...

  • Barco 26-0702000-00 - page 116

    1 16 FSN Series • User ’s Guide • Rev 01 4. Installation Card and Rear Panel Installation `~êÇ=~åÇ=oÉ~ê=m~åÉä=fåëí~ää~íáçå The following cards are pre-installed in the FSN-1400 ch assis: • System card: slot 14 • M/E card: slot 8 Optional cards (e.g., MVR , UIC , NIC , DVE and NAC ) can be installed accordi ng to the tabl ...

  • Barco 26-0702000-00 - page 117

    FSN Series • User ’s Guide • Rev 01 117 4. Installation Card and Rear Pa nel Installation oÉ~ê=m~åÉä=fåëÉêíáçå  T o insert a rear panel: 1. Use Ta b l e 4 - 4 on page 1 16 to verify the slots in which the cards and their corresponding rear panels can be installed. Front and rear slot numbers will match. For example, if you ins ...

  • Barco 26-0702000-00 - page 118

    1 18 FSN Series • User ’s Guide • Rev 01 4. Installation Card and Rear Panel Installation `~êÇ=fåëÉêíáçå  T o insert a card: 1. Use Ta b l e 4 - 4 on page 1 16 to verify the slot s in which the card can be installed . 2. Once verified, open the chassis front door and remove it (if desired). In Chapter 2, refer to the “ Chassis ...

  • Barco 26-0702000-00 - page 119

    FSN Series • User ’s Guide • Rev 01 119 4. Installation Card and Rear Pa nel Installation 5. Using the nylon gui des in the chassis for a lignment, carefully insert the card into the chassis until both ejectors engage th e rim of the card cage. Each ejector will “automatically” angle towards the mid dle of the ca rd. Figure 4-12. Ejectors ...

  • Barco 26-0702000-00 - page 120

    120 FSN Series • User ’s Guide • Rev 01 4. Installation Card and Rear Panel Installation 7. Release the handles so that they spring back and lock into place. 8. Repeat from step 1 for all additional cards that you want to install. 9. When complete, re-install the chassis front door, close and secure. `~êÇ=oÉãçî~ä  T o remove a card: ...

  • Barco 26-0702000-00 - page 121

    FSN Series • User ’s Guide • Rev 01 121 4. Installation Signal Connections páÖå~ä=`çååÉÅíáçåë The following topics are discu ssed in this section: • Output Conne cti on s • Aux Output Conn ections • External DSK Input Connections • Native Input Connections • Universal Inpu t Connections • Analog Format Co nn ection T ...

  • Barco 26-0702000-00 - page 122

    122 FSN Series • User ’s Guide • Rev 01 4. Installation Signal Connections lìíéìí=`çååÉÅíáçåë The figure below illustra tes the output connections on the M/E card’s rear panel: Figure 4-15. Output connections  Use the following steps to connect the FSN-1400’s main Program outputs: 1. The Program Out 1 and Program Out 2 s ...

  • Barco 26-0702000-00 - page 123

    FSN Series • User ’s Guide • Rev 01 123 4. Installation Signal Connections 2. Connect M/E 1 Preview Out to a monitor . This output provides the bank’s “lookahead” preview video. In Chapter 7, refer to the “ Understanding Lookahead Pre view ” section on page 31 9 for additional informatio n. 3. Connect M/E 1 Clean Out to a monitor or ...

  • Barco 26-0702000-00 - page 124

    124 FSN Series • User ’s Guide • Rev 01 4. Installation Signal Connections ^ìñ=lìíéìí=`çååÉÅíáçåë Aux (auxiliary) buses are extra switching buse s that allow video signals to be routed from the FSN-1400 to external equipment. The figure b elow illustrates the Aux output connections on the M/E card’s rear panel, and the opti ...

  • Barco 26-0702000-00 - page 125

    FSN Series • User ’s Guide • Rev 01 125 4. Installation Signal Connections bñíÉêå~ä=aph=fåéìí=`çååÉÅíáçåë The figure below illustra tes extern al DSK input connectio ns on the M/E card’s rear panel: Figure 4-17. External DSK cut and fill connections  Use the following steps to connect external DSK cut and fill signals ...

  • Barco 26-0702000-00 - page 126

    126 FSN Series • User ’s Guide • Rev 01 4. Installation Signal Connections k~íáîÉ=fåéìí=`çååÉÅíáçåë The figure below illustra tes native input connecti ons on a NIC ’s rear p anel: Figure 4-18. Native input connections  Use the following steps to connect native inputs to a NIC . All connections use BNC cables. 1. Connec ...

  • Barco 26-0702000-00 - page 127

    FSN Series • User ’s Guide • Rev 01 127 4. Installation Signal Connections råáîÉêë~ä=fåéìí=`çååÉÅíáçåë The figure below illustra tes universal input connections on a UIC ’s rear panel: Figure 4-19. Universal input connections  Use the following steps to connect universal inputs to a UIC . 1. Using an HD-15 cable dire ...

  • Barco 26-0702000-00 - page 128

    128 FSN Series • User ’s Guide • Rev 01 4. Installation Signal Connections the panel. Use the Input S etup Menu to set up universal input signals. In Chapter 5, refer to the “ Input Menu ” section on page 202 for se tup details. • In Chapter 6, refer to the “ Universal In put Setup ” section on page 293 for step- by-step setup instr ...

  • Barco 26-0702000-00 - page 129

    FSN Series • User ’s Guide • Rev 01 129 4. Installation Signal Connections jìäíáîáÉïÉê=`çååÉÅíáçåë The figure below illustra tes moni tor outp ut connection s on the MVR ’s rear panel: Figure 4-20. Universal input connections Please note: • In both single and dual monitor configurations (as selected on the Multiviewer ...

  • Barco 26-0702000-00 - page 130

    130 FSN Series • User ’s Guide • Rev 01 4. Installation Signal Connections ...

  • Barco 26-0702000-00 - page 131

    FSN Series • User ’s Guide • Rev 01 131 RK==jÉåì=lê áÉ åí ~íáçå få=qÜáë=`Ü~éíÉê This chapter describes all system menus, includ ing the functio ns that are available, a nd descriptions of each menu tree (in block diagram fo rmat). The following topics are discu ssed: • Menu T ree • Using the Menu System • Buttons, T ...

  • Barco 26-0702000-00 - page 132

    132 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Menu Tree jÉåì=qêÉÉ T wo menu trees are provided in this sectio n. Please u se these diagra ms for refe rence as you learn how to operate the system. • High Level Menu T ree • System Menu T ree eáÖÜ=iÉîÉä=jÉåì=qêÉÉ The figure below illustra tes a high-level vie ...

  • Barco 26-0702000-00 - page 133

    FSN Series • User ’s Guide • Rev 01 133 5. Menu Orientation Menu Tree póëíÉã=jÉåì=qêÉÉ The figure below illustra tes an expanded view of the System Menu . Figure 5-2. FSN Series System Menu Com Setup Syste m Test Patterns Clean Feed Input Setu p DSK Setup Map Buttons Tally Setup User Prefs Save All Software Diagno stic s Reset Back ...

  • Barco 26-0702000-00 - page 134

    134 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Using the Menu Syste m rëáåÖ=íÜÉ=jÉåì=póëíÉã This section lists the rules and conventions fo r using FSN Serie s menus. For orientation purposes only , the figure bel ow illu strates the various menu sections. Figure 5-3. Sample Menu Layout Following are descriptions o ...

  • Barco 26-0702000-00 - page 135

    FSN Series • User ’s Guide • Rev 01 135 5. Menu Orientation Using the Menu System 3) Palette In the center of the menu, the Palette provides an area for menu-specific and function-specific buttons, graphics and tables. 4) Menu Bar Along the left side, the Menu Bar provides instant access to all primary menus. Each button is latching, and mutu ...

  • Barco 26-0702000-00 - page 136

    136 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Buttons, Tab les and Matric es _ìííçåëI=q~ÄäÉë=~åÇ=j~íêáÅÉë There are a variety of button “types” th at can appear in the menus, and there are also general rules that apply to butt on categories, co lors, tables and matrices. Detailed explanations are provide d ...

  • Barco 26-0702000-00 - page 137

    FSN Series • User ’s Guide • Rev 01 137 5. Menu Orientation Buttons, Tables and Matrices • Navigation Buttons are brown, and when pressed, they take you to a new location in the menu tree. For example: ~ Press to switch to a sub-menu beneath th e current “parent” menu. In the sub-menu, the {Back} button a ppears in the To o l B a r , en ...

  • Barco 26-0702000-00 - page 138

    138 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Buttons, Tab les and Matric es • Conditional The figure below ill ustra tes both states of a Conditional function button. Figure 5-12. Conditional button states Conditional butto ns appear when certain condi tional funct ions are required. Th ey can be either momentary or latchi ng ...

  • Barco 26-0702000-00 - page 139

    FSN Series • User ’s Guide • Rev 01 139 5. Menu Orientation Buttons, Tables and Matrices mçéJìé=_ìííçåë The figure below ill ustra tes both states of a Pop-up button. Figure 5-15. Pop-up button states (sample) A Pop-up button has a dark blue colored insert , and just like a To g g l e , t he current selection appears wit hin t he in ...

  • Barco 26-0702000-00 - page 140

    140 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Buttons, Tab les and Matric es When the switcher locat ion changes, the label in t he Tit l e B ar also changes. For exampl e : S On the Wi pe Men u , the locati o n button enables you to access and adjust wipes on M/E 1 and PGM — without leavi ng the menu. S On the Ke yer Menu , t ...

  • Barco 26-0702000-00 - page 141

    FSN Series • User ’s Guide • Rev 01 141 5. Menu Orientation Buttons, Tables and Matrices pìãã~êó=çÑ=_ìííçå=qóéÉë The table below summarizes buttons types, attri but es, colors and functions. T able 5-1. Button types, colors and functions Ty p e Attributes Color Insert Function Menu Bar Latching G ray — Provides direct access ...

  • Barco 26-0702000-00 - page 142

    142 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Buttons, Tab les and Matric es q~ÄäÉë The FSN Series user interface makes extensiv e use of tables, for a varie t y of fun ct ions such as keys, memory registers, tallies, etc. The figure below ill ustrates a sample table: Figure 5-18. Sample T able Each table includes a heading ...

  • Barco 26-0702000-00 - page 143

    FSN Series • User ’s Guide • Rev 01 143 5. Menu Orientation Buttons, Tables and Matrices j~íêáÅÉë On certain menus such as the Wipe M en u and th e Output T est Pattern Menu , matrices are provided that enable you t o choose a particul ar item (from a large grou p of items). A sample matrix is shown be low: Figure 5-21. Sample Matrix In ...

  • Barco 26-0702000-00 - page 144

    144 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Using the Keypa d rëáåÖ=íÜÉ=hÉóé~Ç When a value bu tt on is pressed, the Keyp ad appears. The figure below ill ustrates a sample Keypad : Figure 5-24. Keypad (sample) Following are descript ions of each section and each type of button in the Keypad : 1) Function Bar The Fu ...

  • Barco 26-0702000-00 - page 145

    FSN Series • User ’s Guide • Rev 01 145 5. Menu Orientation Using the Keypa d register clears when you begin entering n umbers, and digits shift left as you enter them. Y ou must press {Enter} to complet e an entry . 3) Backspace Press Backspace { ← } during a numeric entry process to clear the re gister by one digit with each press. 4) Num ...

  • Barco 26-0702000-00 - page 146

    146 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Using the Keypa d 10) T rim + Enter an offset value using the numeric button s, then press {T rim +} to add to the parameter’s current value. Pressing {Enter} is not required, and the “trim” value remains in the reg ister , enabling yo u to trim repea tedly by the same offset. ...

  • Barco 26-0702000-00 - page 147

    FSN Series • User ’s Guide • Rev 01 147 5. Menu Orientation Using the Pop-up Keyboard rëáåÖ=íÜÉ=mçéJìé=hÉóÄç~êÇ In several switcher menus, you can use a pop-up Key board to enter names and descriptions for various sw itcher functi ons. For example: S On the Input Setup Menu , the Keyboard is used to name inputs, as t hey’ll ...

  • Barco 26-0702000-00 - page 148

    148 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Transition Menu qê~åëáíáçå=jÉåì The T ransition Menu enables you to change auto t ra nsit ion rates and adjust tra nsition “curves” throughout the switcher . The figure below illust rates a sample T ransition Menu : Figure 5-26. T ransition Menu (sample) On the menu, v ...

  • Barco 26-0702000-00 - page 149

    FSN Series • User ’s Guide • Rev 01 149 5. Menu Orientation Transition Menu qê~åëáíáçå=jÉåì=^ÅÅÉëë There are two ways to access the T ransition Menu : • In the Menu Bar , press {Page} t o display page 1 (if required). The n, press the {T rans} button. • Press and hold any MIX button on the cont rol panel (e.g. , MIX in the ...

  • Barco 26-0702000-00 - page 150

    150 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Transition Menu qê~åëáíáçå=`ìêîÉ=^ÇàìëíãÉåí There are four T ransition Curve buttons for each section of t he swit cher . The buttons in each row are mu tu al l y exclu s i ve: • Linear Curve — Press the {Linear} but ton to appl y a linear ra mp to the tran s ...

  • Barco 26-0702000-00 - page 151

    FSN Series • User ’s Guide • Rev 01 151 5. Menu Orientation Wipe Menu táéÉ=jÉåì The Wipe Menu enables you to sele ct and modify wipe patterns. I n Chapter 1, refer to th e “ Glossary of Switcher T er ms ” section on page 20 for a definition of “ wi pe .” The figure below ill ustra tes a sample Wip e Menu : Figure 5-27. Wipe Menu ...

  • Barco 26-0702000-00 - page 152

    152 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Wipe Menu táéÉ=jÉåì=^ÅÅÉëë There are two ways to access the Wip e Me n u : • In the Menu Bar , press {Page} t o display page 1 (if required). The n, press the {Wipes} button. The parameters for the last selected or modified wi pe are displayed. • Press and hold any WIP ...

  • Barco 26-0702000-00 - page 153

    FSN Series • User ’s Guide • Rev 01 153 5. Menu Orientation Wipe Menu _~åâ The {Bank} button is a “location” button that enables you to select and modif y wipes on any switcher bank, without le aving the menu. Refer to the “ Lo cation Buttons ” section on page 139 for additi onal details. Press {Bank} to display the Bank Selec tio n ...

  • Barco 26-0702000-00 - page 154

    154 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Wipe Menu Press {Direction} to display the Direction Pop -up , which offers three options: • {Normal} — Each time AUTO TRAN is pressed, or each time th e T- B a r is mo ved from limit to limit, wipes always travel from the left to right (for vertical wip es), or from the top to t ...

  • Barco 26-0702000-00 - page 155

    FSN Series • User ’s Guide • Rev 01 155 5. Menu Orientation Wipe Menu bÇÖÉ The {Edge} function enables you to modify t he edg e of the wipe pattern and adjust its width. Press {Edge} to display the Edge Pop-up , which offers two options. Figure 5-33. Wipe Edge Pop-up • {Hard} — The wipe edge t hat divides BG and PST is a hard edge. Fig ...

  • Barco 26-0702000-00 - page 156

    156 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Wipe Menu • {Edge Wid t h} — Use this value button to adjust the width of the h ard or soft edge — from thick to thin, as desired. Figure 5-36. Wipe edge adjustment Edge widths can be adjusted f rom 0 (zero) to the curren t horizontal and/or ve rtical output resolution of the s ...

  • Barco 26-0702000-00 - page 157

    FSN Series • User ’s Guide • Rev 01 157 5. Menu Orientation Keyer Me nu hÉóÉê=jÉåì The Keyer Me nu enables yo u to modify al l keyers on the co ntrol panel. Key sources are selected on th e Key Bus in an M/E and on the Phantom Key Bus on the PGM bank. In Chapter 1, refer to the “ Glossary of Switcher T erms ” section on page 20 for ...

  • Barco 26-0702000-00 - page 158

    158 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Keyer Menu hÉóÉê=jÉåì=^ÅÅÉëë There are two ways to access the Keyer Me nu : • In the Menu Bar , press {Page} t o display page 1 (if required). The n, press the {Keys} button . The parameters for the last selected keyer are disp layed. • Arm the desired keyer first, th ...

  • Barco 26-0702000-00 - page 159

    FSN Series • User ’s Guide • Rev 01 159 5. Menu Orientation Keyer Me nu hÉóÉê=cìåÅíáçåë=~åÇ=jçÇáÑáÉêë In the Keyer Menu , the buttons on the To o l B a r and in the Palette allow you to modify the selected keye r in a variet y of creative ways. The follow ing modifiers a re discussed: • Keyer Selection • Ty p e • C ...

  • Barco 26-0702000-00 - page 160

    160 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Keyer Menu • All selections and functions for th e new keyer app ear on the Keyer Menu . qóéÉ The {T y pe} button i s a pop-up t hat enables you to select t he processing mod e for the selected keyer . Figure 5-41. Key type pop-up Press {T ype} to display the Ke y T ype Pop-up , ...

  • Barco 26-0702000-00 - page 161

    FSN Series • User ’s Guide • Rev 01 161 5. Menu Orientation Keyer Me nu `äáéI=d~áåI=lé~Åáíó Press {Clip Gain Op acity} to display the {Clip} , {Gain} and {Opacity} value butt ons. Figure 5-42. Clip, Gain and Opacity adjustment s Use these controls to adjust th e appearance of t he sele cted key: • {Clip} — Adjust the threshold o ...

  • Barco 26-0702000-00 - page 162

    162 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Keyer Menu hÉó=cáää Once the selected Key Sou r ce cut s the ele ctronic hole in the background video, use the {Key Fill} button to determine the source of th e video that fills the hole . Figure 5-43. Key fill pop-up Press {Key Fill} to display th e Key Fill Pop-up , wh ich off ...

  • Barco 26-0702000-00 - page 163

    FSN Series • User ’s Guide • Rev 01 163 5. Menu Orientation Keyer Me nu • {Matte} — Video from an internal matte generator fills the hole. When {Matte} is selected, the matte color is full y adjustable using the three value buttons or the {Color Picker} button. Figure 5-45. Matte color value buttons and color picker button Use these butto ...

  • Barco 26-0702000-00 - page 164

    164 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Keyer Menu asb=hÉóÉê=cìåÅíáçåë When a keyer is selected that h as a DVE channel assign ed (either to t he cut signal, the fill signal or both signals), four DVE-sp ecific functions appear on the Palette , as shown below . When a keyer is selecte d that does not ha ve a DV ...

  • Barco 26-0702000-00 - page 165

    FSN Series • User ’s Guide • Rev 01 165 5. Menu Orientation Keyer Me nu pï~é=hÉó=pÉííáåÖë The {Swap Key Setting s} bu tton swaps the settings between KEY 1 and KEY 2 . The function is not available for t he DSK. Please note: • KEY 2 is always “over” KEY 1 in the M/E — vi sually on top of, and electronically downstream of KE ...

  • Barco 26-0702000-00 - page 166

    166 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Keyer Menu bñíÉêå~ä=hÉó When the DSK is selected, the {External Key} button appe ars in the To o l B a r , adjacent t o the {T ype} button, as shown below: Figure 5-49. Keyer Menu: DSK (sample) The {External Key} b utton is a toggle th at enables or disables the ability to ke ...

  • Barco 26-0702000-00 - page 167

    FSN Series • User ’s Guide • Rev 01 167 5. Menu Orientation Keyer Me nu • Select {Off} to turn off the external key connectio ns. Key sources are selected in the normal manner using the Phantom Key Bus . `çéó=hÉó=pÉííáåÖë The {Copy Key Settings} butt on enables you to copy key parameters f rom one keyer to another . Press {Copy ...

  • Barco 26-0702000-00 - page 168

    168 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Keyer Menu When a copy is requested and DVE channels are involved, plea se note the followin g important points: • All parameters on the Keyer Menu are copied, provided that DVE channels are assigned to both th e source and d estination keyers. If there is an i ncompatibility betwe ...

  • Barco 26-0702000-00 - page 169

    FSN Series • User ’s Guide • Rev 01 169 5. Menu Orientation Color Background Menu `çäçê=_~ÅâÖêçìåÇ=jÉåì The Color Backg round Menu ena bles you to select the full screen color for each color background signal th at is currently ma pped to the panel. Y ou can also learn up to six “user” colors, which carry over to the Color ...

  • Barco 26-0702000-00 - page 170

    170 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Color Backgr ound Menu `çäçê=_~ÅâÖêçìåÇ=jÉåì=^ÅÅÉëë T o access the Color Background Menu : • In the Menu Bar , press {Page} t o display page 1 (if required). The n, press the {Color BG} button. `çäçê=_~ÅâÖêçìåÇ=cìåÅíáçåë The Color Backgroun d ...

  • Barco 26-0702000-00 - page 171

    FSN Series • User ’s Guide • Rev 01 171 5. Menu Orientation Color Background Menu `çäçê=tÜÉÉä The Color Wheel en ables you to select a color f rom the full 3 60 degree spect rum. Figure 5-54. Color Wheel T o choose a color , simply touch the desired color on the wheel. The “ Current Color ” box updates, and the value s in the {Hue ...

  • Barco 26-0702000-00 - page 172

    172 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Color Backgr ound Menu rëÉê=`çäçêë Along the left side of the Co lor Backgrou nd Menu , t he User Colors Section enabl es you to store (and appl y) up to six favorite colors. Figure 5-56. User Colors Section (sample) T o learn a colo r: • Select a color background signal (1 ...

  • Barco 26-0702000-00 - page 173

    FSN Series • User ’s Guide • Rev 01 173 5. Menu Orientation Color Picker Pop-up `çäçê=máÅâÉê=mçéJìé The Co lor Picker Pop-up enables you to use the color wheel, the color ch ips, and up to six “user” colors in a variety of locations throughout the menu system. These locations are: • Wipe M en u — when a hard edge is selec ...

  • Barco 26-0702000-00 - page 174

    174 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Memory Menu jÉãçêó=jÉåì The Memory Me nu enables yo u to manage your memory registers. This includes th e ability to view , name, lock and delete registers, plus the ability to enable o r disable Memory Modules, and the sub -sections wit hin each module called “ Enables .? ...

  • Barco 26-0702000-00 - page 175

    FSN Series • User ’s Guide • Rev 01 175 5. Menu Orientation Memory Menu jÉãçêó=jÉåì=^ÅÅÉëë There are two ways to access the Memory Menu : • In the Menu Bar , press {Page} t o display page 2 (if required). The n, press the {Memory} button. • Press and hold either the STORE or RECALL button in the control panel’s Memory Secti ...

  • Barco 26-0702000-00 - page 176

    176 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Memory Menu jÉãçêó=jÉåì=aÉëÅêáéíáçå The figure below ill ustra tes a sample Memory Menu in the View M od e . Figure 5-59. Memory Menu, Vi ew Mode (sample) The Memory Menu provide s a table of al l 1000 memory regist ers, using a view of 15 row s of registers at a ti ...

  • Barco 26-0702000-00 - page 177

    FSN Series • User ’s Guide • Rev 01 177 5. Menu Orientation Memory Menu • The eight right-hand colu mns (under t he Modules heading) indicate which modules are included in each register . These columns correspond t o the eight categories of modu les available on th e panel: M/E 1 , M/E 2 , PG M , SYS (System) , Cust (Custom), Still , Aux an ...

  • Barco 26-0702000-00 - page 178

    178 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Memory Menu bå~ÄäÉë=jÉåì=aÉëÅêáéíáçå From the Memory Menu , press {Enables} to display the Enables Menu , as shown below in the Vi ew M od e . Figure 5-60. Enables Menu, View Mode (sample) The Enables Me nu provides a close-up view of the “se lected” register on ...

  • Barco 26-0702000-00 - page 179

    FSN Series • User ’s Guide • Rev 01 179 5. Menu Orientation Memory Menu • Module Section — Below the table is a matrix of buttons, one for each module . Lines are drawn to th e corresponding cells in t he table for reference. Please note: ~ For version 3.0, the CUST and STILL buttons are grayed out. ~ In Store Mode , the M/E 1 , PGM , SYS ...

  • Barco 26-0702000-00 - page 180

    180 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Memory Menu bå~ÄäÉ=aÉëÅêáéíáçåë This section provid es descriptions of each module’s Enables. The following topics are di scussed: • M/E 1 and M/E 2 Enables • PGM Enables • System Enables • Aux Enables • DVE Enables jLb=N=~åÇ=jLb=O=bå~ÄäÉë The figure ...

  • Barco 26-0702000-00 - page 181

    FSN Series • User ’s Guide • Rev 01 181 5. Menu Orientation Memory Menu • {Effects} — stores or recalls the selections in th e M/E’s Effects Group and Next T ransition Group . Figure 5-62. Ef fects Enables, M/E 1 and M/E 2 • {Rate} — stores or recalls the M/E’s transition rate . • {T -Bar} — stores or recalls the position of t ...

  • Barco 26-0702000-00 - page 182

    182 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Memory Menu póëíÉã=bå~ÄäÉë The figure below ill ustra tes the Enables when the SYS (System) module is selected: Figure 5-65. SYS Enables Following are descript ions of each System Enable: • {Input Map} — stores or recalls th e panel’s current input mapping, as set on ...

  • Barco 26-0702000-00 - page 183

    FSN Series • User ’s Guide • Rev 01 183 5. Menu Orientation Memory Menu Please note: • If a memory register is saved without any NAC s or UOC s installed, only Aux 1 through 6 will be save d. If th is register is recalled later with some combinat ion of NAC s and/or UOC s installed, only Aux 1 through 6 will change — the remaining Aux bus ...

  • Barco 26-0702000-00 - page 184

    184 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Memory Menu • Memory Menu, V alue Button Selection — I n the Sto r e , Reca ll and Vi ew modes, on both the Memory Menu and the Enables Menu , yo u can select a register by pressing the { Me mory Register} valu e but ton. When the Keypad appears, enter the desired re gister and p ...

  • Barco 26-0702000-00 - page 185

    FSN Series • User ’s Guide • Rev 01 185 5. Menu Orientation Memory Menu ^Çî~åÅÉÇ=jÉãçêó=cìåÅíáçåë The Advanced Memory Menu provides access to the follo wing memory functions: • Locking and Un lo cking Registers • Deleting Registe rs Please note the following important poi nts regarding the Advanced Memor y Menu : • th ...

  • Barco 26-0702000-00 - page 186

    186 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Aux Menu ^ìñ=jÉåì The figure below ill ustra tes a sample Aux Menu . Figure 5-68. Aux Menu (sample) The Aux Menu provides status-at-a-glance for all installed Aux outputs, plus the ability t o select a specific Aux bus on which to swit ch sources. T o access the menu, press {Pag ...

  • Barco 26-0702000-00 - page 187

    FSN Series • User ’s Guide • Rev 01 187 5. Menu Orientation Aux Menu Please note: • In the Aux ta b l e, buses are displayed as fol l o ws : ~ Active Aux buses are displayed in gray . ~ The highlighte d Aux bus (on which sources can be swi tched) is disp layed in light yellow . ~ Aux buses that are not mapped, or for which physica l Aux out ...

  • Barco 26-0702000-00 - page 188

    188 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu póëíÉã=jÉåì The following topics are di scussed in this sectio n: • System Menu Description • Communications Setu p Menu • Reference and Output Setup Menu • Input Menu • Map Buttons Menu • External DSK Setup Menu • Clean Feed Setup Menu • Ta l l y ...

  • Barco 26-0702000-00 - page 189

    FSN Series • User ’s Guide • Rev 01 189 5. Menu Orientation System Menu póëíÉã=jÉåì=aÉëÅêáéíáçå The figure below ill ustra tes a sample System Menu . Figure 5-69. System Menu (sample) The System Menu provides access to all setup functions, plus convenient status tables. The following topics are di scussed in this sectio n: ? ...

  • Barco 26-0702000-00 - page 190

    190 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu póëíÉã=jÉåì=cìåÅíáçåë On the System Menu , na vigation buttons are arrange d in thre e groups: • Setup Functio ns (at the top of the Palette ) • Miscellaneou s Functions (at the bottom of the Palette ) • To o l B a r function s The following funct io ...

  • Barco 26-0702000-00 - page 191

    FSN Series • User ’s Guide • Rev 01 191 5. Menu Orientation System Menu • Press {Multiviewer Setup} to display the Multiviewer Setup Menu , which enables you to set up all aspects of the optional Multi viewer . Refer to the “ Multiviewer Setup Menu ” section on page 239 for complet e de tails. • Press {Aux Setup} to display the Aux Se ...

  • Barco 26-0702000-00 - page 192

    192 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu • Press {Reset} to display the Reset Menu , which enables you to pe rform both soft and factory r esets. Refer to the “ Reset Menu ” section on page 274 for details. • Press {Shut Down} to display a prompt for perfo rming a system shutdown. Refer to the “ System ...

  • Barco 26-0702000-00 - page 193

    FSN Series • User ’s Guide • Rev 01 193 5. Menu Orientation System Menu ~ Video Reference Input — lists the system’s vi deo reference input and “lock” status. ~ DVE — lists the number of optional DVE Cards in the chassis. ~ M/E — lists if the M/E (Mix/Eff e ct) Card is missi ng or pr ese n t. ~ MVR — lists if the optional Multiv ...

  • Barco 26-0702000-00 - page 194

    194 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu `çããìåáÅ~íáçåë=pÉíìé=jÉåì From the System Menu , press {Com Setup} to display the Communications Setup Menu , which enables you to “discover” an FSN- 1400 chassis, and set up Ethernet. The figure below ill ustra tes a sample Communications Setup Men ...

  • Barco 26-0702000-00 - page 195

    FSN Series • User ’s Guide • Rev 01 195 5. Menu Orientation System Menu • Subnet Mask — list s the subnet mask of th e associated Ethernet port. This address can be changed using the { Set Subnet Mask} button. • MAC — lists the MAC address of the associated Ethern et port. In the To o l B a r , the follow ing operations can be perf or ...

  • Barco 26-0702000-00 - page 196

    196 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu • T o change the IP address of a highlighted port, press {Set IP Ad dress} to display the IP Address Keypad : Figure 5-75. IP Address keypad (sample) Enter the desired IP address using the decimal point as the separator between the four “octets,” and press {Enter} . ...

  • Barco 26-0702000-00 - page 197

    FSN Series • User ’s Guide • Rev 01 197 5. Menu Orientation System Menu oÉÑÉêÉåÅÉ=~åÇ=lìíéìí=pÉíìé=jÉåì From the System Menu , press {Ref and Outpu t Setup} to disp lay the Reference and Output Setup Menu , which enables you to set up the system’s video reference input, output format (native resolut i on ), and the out ...

  • Barco 26-0702000-00 - page 198

    198 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu ~ If External is selected with the {Ref Input} button, one of three different labels will be shown. • External, Lo ck e d @ [rat e] — if reference video i s detected and locked. • External, Missing — if reference video is missing. In this case, the field will be r ...

  • Barco 26-0702000-00 - page 199

    FSN Series • User ’s Guide • Rev 01 199 5. Menu Orientation System Menu • Press {Ref Output} to change the reference video sign al that is currently available on the REF OU T connector . T wo options are available: ~ T ri-level — selects a tri-level signal as the reference output. ~ Burst — selects a black burst signal as the reference ...

  • Barco 26-0702000-00 - page 200

    200 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu • Press {Output Format } to display the Output Format Keypad , which lists all available output resolu tions. Figure 5-79. Output Format Keypad Each entry is listed using the f ollowing conventi on: Format @ Fv (Hz) . Select the desired format and pr ess {Apply} to set ...

  • Barco 26-0702000-00 - page 201

    FSN Series • User ’s Guide • Rev 01 201 5. Menu Orientation System Menu ~ Off — In this mode, you can not set H and V offsets, and the {Sync Mode} button is active on the Input Setup Menu . • When {Output V -Lock} is On , press {SDI Ou tpu t T iming} to se t SDI H and V offsets, anywhere relative to video reference. T wo value buttons app ...

  • Barco 26-0702000-00 - page 202

    202 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu fåéìí=jÉåì From the System Menu , press {Input Setup } to display the Input Menu , which enables you to set up both native and universal switcher inputs. The figure below illustrates a sample Input Menu . Figure 5-81. Input Menu (sample) The Input Menu is divided i ...

  • Barco 26-0702000-00 - page 203

    FSN Series • User ’s Guide • Rev 01 203 5. Menu Orientation System Menu oÉ~ê=fLl=sáÉï=aÉëÅêáéíáçå The figure below ill ustra tes a sample Rear I/O View on the Input Menu : Figure 5-82. Input Menu, Rear I/O View (sample) The Rear I/O View shows the I/O panels for FSN-1400 slots 1 through 7 , which can be used for input cards. Th ...

  • Barco 26-0702000-00 - page 204

    204 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu `çååÉÅíçê=`çäçêë On the Re ar I/O Views of the UIC , NIC and M/E panels, the color of the ind ividual input connectors is signif icant: • Green indi ca tes that the inpu t is mappe d to the control panel, and the signal is OK. • Red indicate s that the ma ...

  • Barco 26-0702000-00 - page 205

    FSN Series • User ’s Guide • Rev 01 205 5. Menu Orientation System Menu fåéìí=q~ÄäÉ=aÉëÅêáéíáçå The figure below ill ustrates a sample Inpu t T able on the Input Menu : Figure 5-84. Input T able (sample) The Input T able provides informatio n about each i nput, and the yellow high light automatically tracks the sele cted inpu ...

  • Barco 26-0702000-00 - page 206

    206 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu fåéìí=jÉåì=cìåÅíáçåë The following f unctions are availabl e in the To o l B a r : • Press {Map to} to map the selecte d input to the control panel. When pressed, t he Map T o Pop-up appears. Figure 5-85. Map T o Pop-up On the Program Bank’s Prese t Bus ...

  • Barco 26-0702000-00 - page 207

    FSN Series • User ’s Guide • Rev 01 207 5. Menu Orientation System Menu • For interlaced native reso lutions only , press {Freeze Mode} to displa y the Freeze Mode Pop-up . The followi ng “freeze mode” options ar e avail able: ~ Field 1 — free zes the source on field 1. ~ Field 2 — free zes the source on field 2. ~ Frame — freezes ...

  • Barco 26-0702000-00 - page 208

    208 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu • Press {Setup} to display the Input Setup Menu for the selected input. Not e that the display is different, depending if a native input is selected on a NIC , or a universal input is selecte d on a UIC . ~ Refer to the “ Input Setup Menu for Native Input s ” sectio ...

  • Barco 26-0702000-00 - page 209

    FSN Series • User ’s Guide • Rev 01 209 5. Menu Orientation System Menu fåéìí=pÉíìé=jÉåì=Ñçê=k~íáîÉ=fåéìíë The figure below ill ustrates a sample Input Setup Menu when a nati ve input is selected: Figure 5-87. Input Setup Menu for native inputs (sample) The top portion of t he menu displays the same informat ion as the ...

  • Barco 26-0702000-00 - page 210

    210 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu fåéìí=`çäçê=`çêêÉÅíáçå=pÉÅíáçå The figure below ill ustrates the Input Color Correction Section . No te that the con trols are identical for both native an d universal inputs. Figure 5-88. Input Color Correction Section The following input adjustmen ...

  • Barco 26-0702000-00 - page 211

    FSN Series • User ’s Guide • Rev 01 2 1 1 5. Menu Orientation System Menu fåéìí=póåÅ=pÉÅíáçå The figure below ill ustrates the Input Sync Section for native input s: Figure 5-89. Input Sync Section, Native Inputs • Press {Sync Mode} to display the Sync Mode Pop-up , which enables you to set the selected native inpu t’s sync m ...

  • Barco 26-0702000-00 - page 212

    212 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu ~ If the input is greate r than ± on e-half lin e from video reference, Frame Sync mode is automatically selected. The Sync Mode column in th e table displays Auto: Frame Sync . • Frame Sync — In this mode, the system synchronizes the selected input to the external v ...

  • Barco 26-0702000-00 - page 213

    FSN Series • User ’s Guide • Rev 01 213 5. Menu Orientation System Menu fåéìí=j~ëâ=pÉÅíáçå The figure below ill ustrates the Input Ma sk Section for nati ve inputs: Figure 5-90. Input Mask Section, Native Inputs The following adjust ments are provided: • Press {Mask} to mask one or more edges of the video signal , if required. W ...

  • Barco 26-0702000-00 - page 214

    214 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu fåéìí=pÉíìé=jÉåì=Ñçê=råáîÉêë~ä=fåéìíë The figure below ill ustrates a sample Input Setup Menu when a universal input is chosen on the Input Menu . The Capture and Process Pa nel is selected: Figure 5-91. Input Setup Menu for universal inputs (sam ...

  • Barco 26-0702000-00 - page 215

    FSN Series • User ’s Guide • Rev 01 215 5. Menu Orientation System Menu fåéìí=`~éíìêÉ=~åÇ=mêçÅÉëë=m~åÉä On the Input Setup Menu for universal inp uts, press {Capture and Process} to display the Input Captu re and Process Pa ne l . The panel is divided into two sections: • Input Capture and T iming Section • Input Proce ...

  • Barco 26-0702000-00 - page 216

    216 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu • Press {Input Format} to d isplay the In put Format Keyp ad . Use the up ( S ) and down ( T ) arrows to locate the desired format in the li st, then press {Apply} to accept. In Appendix A, refer to the “ Inpu t and Output Fo rmat T abl es ” section on page 445 for ...

  • Barco 26-0702000-00 - page 217

    FSN Series • User ’s Guide • Rev 01 217 5. Menu Orientation System Menu ~ Select RGB to process the input signal in RGB color space (4:4:4), in which the individ ual red, gree n and blue si gnals are sampled at the same rate. The RGB mode is typically used for computer and graph ic sources. • Press {1:1 Sample} to toggle the 1: 1 sampling m ...

  • Barco 26-0702000-00 - page 218

    218 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu  fåéìí=mêçÅÉëëáåÖ=pÉÅíáçå The figure below ill ustrates the Input Proc essin g Section for un iversal inputs: Figure 5-93. Input Processing Section, Universal Inputs The following adjust ments are provided: • Press {Sharpne ss} to display the Sharp ...

  • Barco 26-0702000-00 - page 219

    FSN Series • User ’s Guide • Rev 01 219 5. Menu Orientation System Menu ~ Select Field to Frame to use f ield-to-frame de -interlacing. This mode avoids motion artifacts by converting in dividual input field s to progressive output frames. • If Motion Adaptive de-int erlacing is sele cted, press {Motion Threshold} to adjust the t hreshold o ...

  • Barco 26-0702000-00 - page 220

    220 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu The figure be low illustrates the Quick Adjus t section, which appears when {Size and Position} is pressed: Figure 5-95. Quick Adjust Sec tion The following adjust ments are provided: ~ Press {Fill H} to scale the selected universal input up (or down) to the current nativ ...

  • Barco 26-0702000-00 - page 221

    FSN Series • User ’s Guide • Rev 01 221 5. Menu Orientation System Menu The images below repres ent two examples of Fill V . Figure 5-97. Fill V examples ~ Press {Fill H/V} to scale the select ed universal i nput up (o r down) to the current native horizontal and ver tical resolutions. Please not e: • Aspect ratio is not maintained. Non-p r ...

  • Barco 26-0702000-00 - page 222

    222 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu ~ Press {Source V Size} or use the knob to change the source image’s vertical size. ~ Press the {Lock} button to lock or unlock H and V source size tracking. When locked, bot h parameters track together. When unlocked, H and V can be adjusted independe ntly . ~ Press {S ...

  • Barco 26-0702000-00 - page 223

    FSN Series • User ’s Guide • Rev 01 223 5. Menu Orientation System Menu Remember that once the image is masked as desired, you can use the {Fill H} , {Fill V} or {Fill H/V} functions to scale the image to full screen. fåéìí=`çäçê=`çêêÉÅíáçå=m~åÉä On the Input Setup Menu for universal inp uts, press {Color Correct} to displ ...

  • Barco 26-0702000-00 - page 224

    224 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu j~é=_ìííçåë=jÉåì From th e System Menu , press {Map Buttons} to display the Map Buttons Menu , wh ich enables you to map inputs, test patterns and color backgroun d signals to buttons on the control panel. The figure below illustrat es a sample menu. Figure 5-10 ...

  • Barco 26-0702000-00 - page 225

    FSN Series • User ’s Guide • Rev 01 225 5. Menu Orientation System Menu _ìííçå=j~é=q~ÄäÉ The figure below ill ustrates the Button Map T able : Figure 5-101. Button Map T able (sample) On the Palette , the Button Map T able lists the current mapping f or all shifted and un- shifted buttons, plus the M/E but ton. Please note: • The y ...

  • Barco 26-0702000-00 - page 226

    226 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu j~é=_ìííçåë=jÉåì=cìåÅíáçåë The following adjust ments are provided in the Map Buttons Menu : • Press {Panel Button} (or use the knob) to select the button that you wish to map. Note that se lecting button s in this mann er automatically affects the sta ...

  • Barco 26-0702000-00 - page 227

    FSN Series • User ’s Guide • Rev 01 227 5. Menu Orientation System Menu j~é=_ìííçåë=hÉóé~Ç The figure below illustrates the Map Buttons Keypad with the {Sources} button selected. Figure 5-102. Map Buttons Keypad (sample) The keypad appears when either the {Map Source/Cut} bu tton or t he {Map Linea r Key Fill} button is pressed. Pl ...

  • Barco 26-0702000-00 - page 228

    228 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu programmable displays, as l isted in the table below: j~ééáåÖ=iìã~=hÉóë=~åÇ=iáåÉ~ê=hÉóë Y ou can perform tw o types of keys on the FSN Series: • A Luma (Luminance) Key is one in which the hol e-cutting informat ion is derived from the luminance (brigh ...

  • Barco 26-0702000-00 - page 229

    FSN Series • User ’s Guide • Rev 01 229 5. Menu Orientation System Menu bñíÉêå~ä=aph=pÉíìé=jÉåì From the System Menu , press {External DSK Setup } to display the External DSK Setup Menu , which enables you to set up the DSK Cut and Fill inputs on the M/E Card . These two inputs are only used on the DSK when {Extern al Key} is ena ...

  • Barco 26-0702000-00 - page 230

    230 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu bñíÉêå~ä=aph=q~ÄäÉ The External DSK T able provides information about each input. The yellow highligh t automatically tracks the sele cted input conne ctor in the Rear I/O View . Figure 5-104. External DSK T able (sample) The following columns of inf ormation are ...

  • Barco 26-0702000-00 - page 231

    FSN Series • User ’s Guide • Rev 01 231 5. Menu Orientation System Menu • For interlaced native reso lutions only , press {Freeze Mode} to displa y the Freeze Mode Pop-up . The foll owing options are avail able: ~ Field 1 — free zes the input on field 1. ~ Field 2 — free zes the input on field 2. ~ Frame — freezes an entire frame. • ...

  • Barco 26-0702000-00 - page 232

    232 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu `äÉ~å=cÉÉÇ=pÉíìé=jÉåì From th e System Menu , press {Clean Feed Setup} to display the Clean Feed Setup Menu , which enables you to set clean feed outputs and the source for t he ASSIGN button (in the control panel’s Aux Section ). The figure below ill ustra ...

  • Barco 26-0702000-00 - page 233

    FSN Series • User ’s Guide • Rev 01 233 5. Menu Orientation System Menu Three mutually exclusive clean fee d points are provided for M/E 2’s clean feed output: • Press {M/E 2 Clean 1} to select the clea n feed point prior to Keyer 1. • Press {M/E 2 Clean 2} to select the clea n feed point prior to Keyer 2. • Press {M/E 2 Out} to selec ...

  • Barco 26-0702000-00 - page 234

    234 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu • Press {M/E 2 Clean 1} to select the clean feed point prio r to M/E 2, Keyer 1. • Press {M/E 2 Clean 2} to select the clean feed point prio r to M/E 2, Keyer 2. • Press {PGM Clea n} to select the clean feed point prio r to the DSK. Please note the followi ng import ...

  • Barco 26-0702000-00 - page 235

    FSN Series • User ’s Guide • Rev 01 235 5. Menu Orientation System Menu q~ääó=pÉíìé=jÉåì From th e System Menu , press {T ally Setup} to display the T ally Setup Menu . The figure below illustrates a sample menu. Figure 5-107. T ally Setup Menu (sample) The T ally Setup Menu enables you to assign inputs to the system’ s 24 tally r ...

  • Barco 26-0702000-00 - page 236

    236 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu q~ääó=q~ÄäÉ The figure below ill ustrates a sample Ta l l y Ta b l e . Figure 5-108. T ally table (sample) The T ally T able enables you to associate inputs with tally relays, and set tally closures on an output-by-o utput basis. One row is provided for each of the ...

  • Barco 26-0702000-00 - page 237

    FSN Series • User ’s Guide • Rev 01 237 5. Menu Orientation System Menu q~ääó=pÉíìé=jÉåì=cìåÅíáçåë The following f unctions are provided on the Ta l l y S e t u p M e n u ’s tool bar: • T o associate an input with a tally on the high lighted row , press {Select Input} to display the Input Select ion Keypad . Figure 5-109 ...

  • Barco 26-0702000-00 - page 238

    238 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu • Press {Set T ally Cl osure} to set a relay closure for the highlight ed output. An “ x ” in the highlighted cell indicates that a closure is set. In this cond ition, when the assigned input (e.g., CAM1 ) appears on any of the designated outputs (e.g., PGM ), the r ...

  • Barco 26-0702000-00 - page 239

    FSN Series • User ’s Guide • Rev 01 239 5. Menu Orientation System Menu jìäíáîáÉïÉê=pÉíìé=jÉåì From th e System Menu , press {Multiviewe r Set up } to display the Multiviewer Setup Menu . The figure below ill ustrates a sample menu. Figure 5-1 1 1. Multiviewer Setup Menu (sample) The Multiviewer Setup Menu enables you to set ...

  • Barco 26-0702000-00 - page 240

    240 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu ^ìñ=pÉíìé=jÉåì From th e System Menu , press {Aux Setup} to display the Aux Setup Menu . The figure below illustrates a sample menu. Figure 5-1 12. Aux Setup Menu (sample) The Aux Setup Menu enables you to name an d map both standard and optional Aux outputs, and ...

  • Barco 26-0702000-00 - page 241

    FSN Series • User ’s Guide • Rev 01 241 5. Menu Orientation System Menu oÉ~ê=fLl=sáÉï=aÉëÅêáéíáçå The Rear I/O View for the Aux Setup Menu shows the I/O panels for slot s 8 , 11 , 12 and 13 . Slot 8 (the M/E card) contains the six standard Aux outputs. Slot s 11 through 13 will show all installed optiona l UOC s and NAC s. This ...

  • Barco 26-0702000-00 - page 242

    242 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu • Map — indicate s one of t he following locations to whi ch the out put is mapped: ~ A control panel button on the Aux Output Row (shifte d or un-shifted), as defined with the {Map Aux to Pan el} button. ~ A menu button on the Aux Menu , as defined with th e {Map Aux ...

  • Barco 26-0702000-00 - page 243

    FSN Series • User ’s Guide • Rev 01 243 5. Menu Orientation System Menu rl`=pÉíìé=jÉåì The figure below ill ustrates a sample UOC Setup Me nu , which enables you t o set all parameters for universal Aux outputs. The Output and Process Pan el is selected. Figure 5-1 14. UOC Setup Menu for universal Aux outputs (sample) The top portion o ...

  • Barco 26-0702000-00 - page 244

    244 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu lìíéìí=~åÇ=mêçÅÉëë=m~åÉä From th e UOC Setup Menu , press {Output and Proce ss } to display the Output and Process Panel , which is divided into three sections pl us several tool bar function s. Each section is explained below . • Output Section • Outp ...

  • Barco 26-0702000-00 - page 245

    FSN Series • User ’s Guide • Rev 01 245 5. Menu Orientation System Menu  lìíéìí=mêçÅÉëëáåÖ=pÉÅíáçå The figure below ill ustrates the Outpu t Processing Section : Figure 5-1 16. Output Processing Section, Output and Process Panel • Press {Sharpne ss} to display the Sharpn ess value bu tton. Use t he button (or knob) to ...

  • Barco 26-0702000-00 - page 246

    246 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu  lìíéìí=~åÇ=mêçÅÉëë=qççä=_~ê=cìåÅíáçåë On the Outp ut an d Process Panel , the f ollowing functions are provide d in the To o l B a r : • Press {DVI Sync} to select the polarity of the digital sync output on the DVI connector . The following ...

  • Barco 26-0702000-00 - page 247

    FSN Series • User ’s Guide • Rev 01 247 5. Menu Orientation System Menu  ^Çî~åÅÉÇ=rl`=lìíéìí= pÉíìé=jÉåì From the UOC Setup Menu , press {Advanc ed Output Setup} to display the Advanced UOC Setup Menu , a sample of which is shown below: Figure 5-1 18. Advanced UOC Setup Menu (sample) This menu enables you to adjust UOC ou ...

  • Barco 26-0702000-00 - page 248

    248 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu ~ Press {V T otal} or use the adjacent Knob to set the desired total number of vertical line s in the outp ut image. • Press {Active and Pos} to set the H and V active area, and the H and V position. Four value butt ons appear: ~ Press {H Pos} or use the adjacent Knob t ...

  • Barco 26-0702000-00 - page 249

    FSN Series • User ’s Guide • Rev 01 249 5. Menu Orientation System Menu lìíéìí= páòáåÖ=~åÇ=pÅ~äáåÖ=m~åÉä From the UOC Setup Menu , press {Sizing and Scaling} to display the Outpu t Sizing and Scaling Panel . This panel enables you to size and scale the universal output to a different size, position, resoluti on and mask, a ...

  • Barco 26-0702000-00 - page 250

    250 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu • Black bars are visible above and bel ow an image, for example, when a 16:9 image is scaled down to 4: 3. • The top and bott om portions of an image may fall outside of the raster , for example, when a 4:3 image is scaled up to 16: 9. ~ Press {Fill V} to sca le th e ...

  • Barco 26-0702000-00 - page 251

    FSN Series • User ’s Guide • Rev 01 251 5. Menu Orientation System Menu ~ Press {Source V Pos} or use the knob to change the vert ical position inside the output’s boundaries alo ng t he Y axis. ~ Press {Reset} to reset all pan and zoom values to default. • In the Output Sizing and Scaling section, press {Mask} to displa y four “manual? ...

  • Barco 26-0702000-00 - page 252

    252 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu lìíéìí= `çäçê=`çêêÉÅíáçå=m~åÉä From th e UOC Setup Menu , press {Color Correct} to display the Output Color Correction Panel , which includ es one section, as shown below: Figure 5-122. Output Color Correction Section The following input adjustments a ...

  • Barco 26-0702000-00 - page 253

    FSN Series • User ’s Guide • Rev 01 253 5. Menu Orientation System Menu líÜÉê=pÉíìé=jÉåì From th e System Menu , press {Other Setup} to display th e Other Setup Menu . Only one function is curren tly pro vid ed on the m enu . • When M/E 2 control is enabl ed on the FSN-150, press {M/E Order} to display the M/E Order Pop-up , whic ...

  • Barco 26-0702000-00 - page 254

    254 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu rëÉê=mêÉÑÉêÉåÅÉë=jÉåì From the System Menu , press {User Prefs} to display the User Preferences Menu . The figure below il lustrates a sampl e menu. Figure 5-123. User Preferences Menu (sample) The User Pre ferences Menu enables you to set various control ...

  • Barco 26-0702000-00 - page 255

    FSN Series • User ’s Guide • Rev 01 255 5. Menu Orientation System Menu rëÉê=mêÉÑÉêÉåÅÉë=q~ÄäÉ The figure below ill ustrates a sample User Prefe ren ces T able . Figure 5-124. User Preferences table (sample) The User Pre ferences T able lists all available preferences, except for those provided in the To o l B a r . The yellow ...

  • Barco 26-0702000-00 - page 256

    256 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu • Black on Invalid Video — when an input is selected on a bus, this pref erence controls how the system behaves when the inpu t becomes invalid — such as when the input loses sync or vi deo. ~ On — shows black in place of the input signal, when the selected signal ...

  • Barco 26-0702000-00 - page 257

    FSN Series • User ’s Guide • Rev 01 257 5. Menu Orientation System Menu aá~ÖåçëíáÅë=jÉåì From the System Menu , press {Diags} to display t he Diagnostics Me nu , as shown below . Figure 5-125. Diagnostics Menu The Diagnostics Menu enable s you to perform a variet y of diagnostic t ests. The followin g topics are discussed in this ...

  • Barco 26-0702000-00 - page 258

    258 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu qJ_~êI=gçóëíáÅâ=~åÇ=håçÄë From th e Diagnostics Me nu , press {T -Bar Jo ystick Knobs} to displa y the T- B a r, Joystick, Knobs Menu . The figu re below illust rates a sample menu . Figure 5-126. T -Bar, Joystick, Knobs Menu (sample) The T -Bar , Joystick, ...

  • Barco 26-0702000-00 - page 259

    FSN Series • User ’s Guide • Rev 01 259 5. Menu Orientation System Menu • Press {Joystick} to toggle th e Joystick on and off. When you tog gle the Joystick off, a pop-up asks you to confirm the procedure. When off, the Joystick no longer functi on s, and the {Re-center} button is gray ed out. • Ensure that th e Joystick is ful ly at rest ...

  • Barco 26-0702000-00 - page 260

    260 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu ibaëI=_ìííçåë=~åÇ=aáëéä~óë From th e Diagnostics Me nu , press {LEDs Buttons Displa ys} to display the LEDs, Buttons and Displays Menu . The figure below illust rates a sample menu. Figure 5-127. LEDs, Buttons and Displays Menu (sample) The LEDs, Buttons an ...

  • Barco 26-0702000-00 - page 261

    FSN Series • User ’s Guide • Rev 01 261 5. Menu Orientation System Menu • Press {Button T est Mode} to disp lay the Button T e st Mode Pop-up . Figure 5-128. Button T est Mode Pop-up Press any button on the panel to display its scan code in the pop-up. Press {Close} to conclude the test. • Press {Display Backlig ht} to show the Displa y B ...

  • Barco 26-0702000-00 - page 262

    262 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu q~ääáÉë From the Diagnostics Me nu , press {T allies} to display the T ally Diagnostics Menu . The figure below il lustrates a sampl e menu. Figure 5-129. T ally Diagnostics Menu (sample) The T ally Diag nostics Menu enables you t o test all 2 4 tally relays. Th e Pa ...

  • Barco 26-0702000-00 - page 263

    FSN Series • User ’s Guide • Rev 01 263 5. Menu Orientation System Menu • Press {Close All T allies} to close all t ally relays. dmfl From th e Diagnostics Me nu , press {GPIO} to display the GPIO Diagnostics Menu . The figure below il lustrates a sampl e menu. Figure 5-130. GPIO Diagnostics Menu (sample) The GPIO Diagnostics Menu enables y ...

  • Barco 26-0702000-00 - page 264

    264 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu The following diagno stic functions are provided: • The system provides eight GPO port s. T o test the ports, connect target devices to the ports as required. Then, pre ss any combination of buttons in the GPO sect ion of the Palette to toggle the state of the selected ...

  • Barco 26-0702000-00 - page 265

    FSN Series • User ’s Guide • Rev 01 265 5. Menu Orientation System Menu • Date/Time — lists the date and time th at the error occurred. • Error # — all error “types” are assigned unique numbers. This feature is designed to assist T echnical Suppo rt personnel. • Description — provides a brief description of t he error . The fo ...

  • Barco 26-0702000-00 - page 266

    266 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu sáÉï=içÖ From the Diagnostics Menu , press {V iew Log} to display the V iew Log Menu . The figure below illustrates a sample menu. Figure 5-133. V iew Log Menu (sample) The View Log Menu provides a comprehensive scrolling list of al l events recorded in t he log sinc ...

  • Barco 26-0702000-00 - page 267

    FSN Series • User ’s Guide • Rev 01 267 5. Menu Orientation System Menu The following ad ditional fu nctions are provided: • Press {FSN-150} to switch the Log T able to a list of events from the FSN-150 control panel. • Press {FSN-1400} to switch the Log T able to a list of events from the FSN-1400. • Press {Clear Log} to clear the enti ...

  • Barco 26-0702000-00 - page 268

    268 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu pçÑíï~êÉ=jÉåì From th e System Menu , press {Software} to display the Sof tware Menu . The figure below illustrates a sample menu. Figure 5-134. Software Menu (sample) The Sof tware Menu enables you to update t he FSN-1400 and control panel with the latest softwa ...

  • Barco 26-0702000-00 - page 269

    FSN Series • User ’s Guide • Rev 01 269 5. Menu Orientation System Menu pçÑíï~êÉ=q~ÄäÉ The figure below ill ustrates a sample Software T able . Figure 5-135. Software t able (sample) The Software T able lists the current versions of software in the FSN-1400 and control panel. The following columns of information are provid ed: • De ...

  • Barco 26-0702000-00 - page 270

    270 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu lìíéìí=qÉëí=m~ííÉêåë=jÉåì From th e System Menu , press {Output T est Patterns} to display the Output T est Patterns Menu , which enables you to select and di splay test patterns. Any test pattern can be sent to an y output (includ ing Multiviewer outputs ...

  • Barco 26-0702000-00 - page 271

    FSN Series • User ’s Guide • Rev 01 271 5. Menu Orientation System Menu T o send a test pattern to an output, touch the desired BNC in the Rear I/O View section, then touch the desir ed test pattern in the matrix. The following 13 T est Patterns are provided in the mat rix: • H Ramp • V Ramp • 100% Color Bars • 75% Color Bars • SMPT ...

  • Barco 26-0702000-00 - page 272

    272 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu içÅâLråäçÅâ=m~åÉä On the System Menu , press {Lock Pane l} to display t he followin g pop-up: Figure 5-137. Panel Lockout pop-up In this mode, the co ntrol panel and T ouc h Screen are locked ou t, and the pop-u p remains on display . T o unl ock the control pa ...

  • Barco 26-0702000-00 - page 273

    FSN Series • User ’s Guide • Rev 01 273 5. Menu Orientation System Menu _~Åâìé=~åÇ=oÉëíçêÉ=jÉåì From th e System Menu , press {Backup and Resto re} to display the Backup and Restore Me nu , which enables you to back up and restor e the system to/from a USB drive. Figure 5-139. Backup and Restore Menu The following f unctions ar ...

  • Barco 26-0702000-00 - page 274

    274 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu oÉëÉí=jÉåì From th e System Menu , press {Reset} to displa y the Reset Menu , which enables you to perform a facto ry rese t an d severa l typ e s of “sof t” resets. Figure 5-140. Reset Menu On the Palette , brief instructions are provi ded for each type of res ...

  • Barco 26-0702000-00 - page 275

    FSN Series • User ’s Guide • Rev 01 275 5. Menu Orientation System Menu • Press {Soft Reset Panel} to perform a “soft” reset on the control panel only . All stored data is preserved. After pressing the butt on, you will be prompted t o continue or cancel the proce dure. • Press {Sof t Reset FSN-1400} to perform a “soft” reset on t ...

  • Barco 26-0702000-00 - page 276

    276 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation System Menu póëíÉã=pÜìíÇçïå From th e System Menu , press {Shut Down} to shut down the cont rol panel. Once the button is pressed, you will be prompt ed to continu e or cancel the procedure. Figure 5-141. System Shutdown Pop-up Once the control panel shuts down, turn off ...

  • Barco 26-0702000-00 - page 277

    FSN Series • User ’s Guide • Rev 01 277 5. Menu Orientation Help Menu and Shortcuts eÉäé=jÉåì=~åÇ=pÜçêíÅìíë The figure below ill ustrates the Help Menu : Figure 5-142. Help Menu The Help Menu provides a convenie nt table of control panel and menu sho rtcuts, plus technical suppo rt information. T o access the Hel p Menu : • ...

  • Barco 26-0702000-00 - page 278

    278 FSN Series • User ’s Guide • Rev 01 5. Menu Orientation Help Menu and Shortcuts pÜçêíÅìíë The table below summarizes control panel and menu shortcuts: T able 5- 8. Menu Shortcut s To : Press and hold: Display the Clean Feed Setup Menu , Assign Panel Freeze an input in the Custom Cont rol section, then press any source button Un-fr ...

  • Barco 26-0702000-00 - page 279

    FSN Series • User ’s Guide • Rev 01 279 SK==pó ëí Éã=p Éíìé få=qÜáë=`Ü~éíÉê This chapter provides detailed instructions fo r setting up the FSN Series switcher. The following topi cs are discussed: • Setup Prer equisite s • System Setup Sequence • Power Up and S t atu s Chec k • Return to F actory Default • T ouch ...

  • Barco 26-0702000-00 - page 280

    280 FSN Series • User ’s Guide • Rev 01 6. System Setup Setup Prerequisites pÉíìé=mêÉêÉèìáëáíÉë Before setting up your FSN Series switch er , please review the following prerequi sites: • Ensure that you are familiar with t he FSN-1400. Refer to Chapter 2, “ FSN-1400 Orientation ” on page 33 for details. • Ensure that ...

  • Barco 26-0702000-00 - page 281

    FSN Series • User ’s Guide • Rev 01 281 6. System Setup System Setup Seque nce póëíÉã=pÉíìé=pÉèìÉåÅÉ This section provid es a top level view of the ent ire FSN Series set up procedure, plu s links to each individual sequence. 1. “ Power Up and S t at us Check ,” page 282. 2. “ Return to Factory Default ,” page 283. 3. ...

  • Barco 26-0702000-00 - page 282

    282 FSN Series • User ’s Guide • Rev 01 6. System Setup Power Up and Status Chec k mçïÉê=ré=~åÇ=pí~íìë=`ÜÉÅâ FSN Series system setup: St e p 1 .  Use the following steps to power up your system and check system status. S Prerequisite — Ensure that your system is pr operly installed and cabled. In Chapter 4, refer to the fo ...

  • Barco 26-0702000-00 - page 283

    FSN Series • User ’s Guide • Rev 01 283 6. System Setup Return to Factory Defaul t oÉíìêå=íç=c~Åíçêó=aÉÑ~ìäí FSN Series system setup: St e p 2 . Prior to performing any setup procedures, it is recommend ed that you perform a factory reset — in order to reset all input, output and source mappings to their default valu es. Pa ...

  • Barco 26-0702000-00 - page 284

    284 FSN Series • User ’s Guide • Rev 01 6. System Setup Touch Screen Calibrat ion qçìÅÜ=pÅêÉÉå=`~äáÄê~íáçå FSN Series system setup: St e p 3 . The calibration pro cedure is an excellent starti ng point prior t o performing a comprehensive system setup. S Prerequisite — En sure that you are famil iar with t he Diagnostics Me ...

  • Barco 26-0702000-00 - page 285

    FSN Series • User ’s Guide • Rev 01 285 6. System Setup Communications Setup `çããìåáÅ~íáçåë=pÉíìé FSN Series system setup: St e p 4 In this procedure, you wil l set up communicat ion between the FSN-1400 an d the control pan el . S Prerequisite — Ensure that you are familiar with t he Communications Setup Menu . In Chapt er ...

  • Barco 26-0702000-00 - page 286

    286 FSN Series • User ’s Guide • Rev 01 6. System Setup Restoring the System oÉëíçêáåÖ=íÜÉ=póëíÉã FSN Series system setup: St e p 5 (optional) In this procedure , you will restore your system configuration from a USB drive — provided that you previously backed up your system to a USB drive. S Prerequisite — Ensure that you ...

  • Barco 26-0702000-00 - page 287

    FSN Series • User ’s Guide • Rev 01 287 6. System Setup Reference Video and Output Setup oÉÑÉêÉåÅÉ=sáÇÉç=~åÇ=lìíéìí=pÉíìé FSN Series system setup: St e p 6 In this procedure, you wil l set up the system’s video reference input, out put format (native resolution), and the out put V -Lock setting. S Prerequisite — Ens ...

  • Barco 26-0702000-00 - page 288

    288 FSN Series • User ’s Guide • Rev 01 6. System Setup Reference Video and Out put Setup  Set up V -Lock and Timing — Use the following steps to set the output V -Lock mode and SDI output timi ng, if desired. 1. Press the {Output V -Lock} button to toggl e the Output V -Lock m ode on or off. ~ When On , the {SDI Output Timing} button ap ...

  • Barco 26-0702000-00 - page 289

    FSN Series • User ’s Guide • Rev 01 289 6. System Setup Output Test Pat terns lìíéìí=qÉëí=m~ííÉêåë FSN Series system setup: St e p 7 (optional) In this procedure, you can display t est patterns on selected system outputs (or all system outputs), typically for purp oses of setting up external devi ces. S Prerequisite — Ensure t ...

  • Barco 26-0702000-00 - page 290

    290 FSN Series • User ’s Guide • Rev 01 6. System Setup Clean Feed Setup `äÉ~å=cÉÉÇ=pÉíìé FSN Series system setup: St e p 8 In this pro cedure, you can set clean f eed outputs, and se lect a source for the ASSIGN button (in the control panel’s Aux Section ). S Prerequisite — Ensure that you are familiar with t he Clean Feed Setu ...

  • Barco 26-0702000-00 - page 291

    FSN Series • User ’s Guide • Rev 01 291 6. System Setup Native Input Setup k~íáîÉ=fåéìí=pÉíìé FSN Series system setup: St e p 9 In this procedure, you will perform a complete setup on all native switcher inpu ts. Ensure that your inputs are properly connected to the selected NIC before continuing. S Prerequisite — Ensure that yo ...

  • Barco 26-0702000-00 - page 292

    292 FSN Series • User ’s Guide • Rev 01 6. System Setup Native Input Setup 8. After a factory reset, the Sync Mode fo r all native inpu ts is set to Auto Sync . In this mode, the system automatica lly determines whether to set Auto: Minimum Delay mode or Auto: Frame Sync mode for each input. If Auto: Frame Sync is set, the system will not ret ...

  • Barco 26-0702000-00 - page 293

    FSN Series • User ’s Guide • Rev 01 293 6. System Setup Universal Input Setup råáîÉêë~ä=fåéìí=pÉíìé FSN Series system setup: St e p 1 0 In this procedure, you will perf orm a complete setup on all universal switcher inputs. Ensure that your inputs are prop erly co nnected to the sele cted UIC before continuing. S Prerequisite ? ...

  • Barco 26-0702000-00 - page 294

    294 FSN Series • User ’s Guide • Rev 01 6. System Setup Universal In put Setup  Capture and T iming — Use the following steps to set up universal input capture and timing param eters: 1. Press {Setup} to display the Input Setup Menu for the selected universal input. 2. Press {Capture and Pro cess} to display the Capture an d Pro cess Pan ...

  • Barco 26-0702000-00 - page 295

    FSN Series • User ’s Guide • Rev 01 295 6. System Setup Universal Input Setup 2. Use the {Mask T op} , {Mask B ottom} , {Mask Left} and {Mask Right} cont rols to mask selected portions of the image, as requ ired. 3. Select the method by which you want to size and scale the image. Masked edg es are taken into account. ~ Press {Fill H} to scale ...

  • Barco 26-0702000-00 - page 296

    296 FSN Series • User ’s Guide • Rev 01 6. System Setup External DSK Input Setup bñíÉêå~ä=aph=fåéìí=pÉíìé FSN Series system setup: St e p 11 In this procedure, you wil l set up the external DSK inputs. S Prerequisite — Ensure that you are familiar with t he following menus: ~ External DSK Setup Menu — Chapter 5, “ External ...

  • Barco 26-0702000-00 - page 297

    FSN Series • User ’s Guide • Rev 01 297 6. System Setup Button Mapping _ìííçå=j~ééáåÖ FSN Series system setup: St e p 1 2 This procedure enables you to map inpu ts, sources, linear key cut and fill signals, t est patterns, color background signals, and re-entry crosspoints to the panel. S Prerequisite — Ensure that you are fami li ...

  • Barco 26-0702000-00 - page 298

    298 FSN Series • User ’s Guide • Rev 01 6. System Setup Aux Setup ^ìñ=pÉíìé FSN Series system setup: St e p 1 3 This procedure enables you to name an d map both standard and optional Aux outputs, and set up a variety of parameters for universal Aux outputs (on any installed UOC ). Aux outputs can be mapped to the control panel or the Au ...

  • Barco 26-0702000-00 - page 299

    FSN Series • User ’s Guide • Rev 01 299 6. System Setup Aux Setup 8. For interlaced Aux outputs only , press {De-Inte rlace} to display the De-Interlace Pop-up . Select Motion Adaptive or Field to Frame as required. 9. If Motion Adaptive is selected, press {Motio n Threshold} and use the control to adjust the t hreshold of t he motion adap ti ...

  • Barco 26-0702000-00 - page 300

    300 FSN Series • User ’s Guide • Rev 01 6. System Setup Aux Setup  Sizing and Scaling — Use the fol lowing steps to set up UOC sizing and scaling: 1. On the Aux Setup Menu , press the UOC Aux conn ector that you want to set up. 2. Press {Setup} to display the UOC Setup Menu for the se lected output. 3. Press {Sizing and Sca li ng} to dis ...

  • Barco 26-0702000-00 - page 301

    FSN Series • User ’s Guide • Rev 01 301 6. System Setup Multiviewer Setup jìäíáîáÉïÉê=pÉíìé FSN Series system setup: St e p 1 4 This procedure enables you to set up al l aspects of the Multiviewer . S Prerequisites — ~ Ensure that the Multi viewer is properly connected . In Chapter 4, refer to the “ Multiviewer Connections ? ...

  • Barco 26-0702000-00 - page 302

    302 FSN Series • User ’s Guide • Rev 01 6. System Setup Multiviewer Setup 4. T o set the clock time, use the User Preferences Menu . Refer to the “ User Preferences Setup ” section on page 304 for instructions. 5. Press {Back} to return to t he Multiviewer Setup Menu .  Source Select ion — Use the following st eps to assign sources t ...

  • Barco 26-0702000-00 - page 303

    FSN Series • User ’s Guide • Rev 01 303 6. System Setup Tally Setup q~ääó=pÉíìé FSN Series system setup: St e p 1 5 This procedure enables you to assign inputs to the system’s 24 tally relays, set tally markers, and set individual tally closures. S Prerequisite — Ensure that you are familiar with t he following menus and connector ...

  • Barco 26-0702000-00 - page 304

    304 FSN Series • User ’s Guide • Rev 01 6. System Setup User Preferences Setup rëÉê=mêÉÑÉêÉåÅÉë=pÉíìé FSN Series system setup: St e p 1 6 This procedure enables you to set a variet y of important user preferences and options. S Prerequisite — Ensure that you are familiar with t he User Preferenc es Menu . In Chapt er 5, ref ...

  • Barco 26-0702000-00 - page 305

    FSN Series • User ’s Guide • Rev 01 305 6. System Setup Saving the Setup p~îáåÖ=íÜÉ=pÉíìé FSN Series system setup: St e p 1 7 This procedure enables you to save all system setup parameters to non-volat ile memory . S Prerequisite — Ensure that you are familiar with t he Save All function. In Chapter 5, refer t o the “ Save All ...

  • Barco 26-0702000-00 - page 306

    306 FSN Series • User ’s Guide • Rev 01 6. System Setup Backing up the System ...

  • Barco 26-0702000-00 - page 307

    FSN Series • User ’s Guide • Rev 01 307 T K==léÉê ~íáçåë få=qÜáë=`Ü~éíÉê This chapter provid es comprehensive opera ti ng instruct ions for the FSN Series. The following topi cs are discussed: • Quick Setup and Operations • Quick Function Refe rence • Understanding Button Color • Understanding Switcher Layers • Unde ...

  • Barco 26-0702000-00 - page 308

    308 FSN Series • User ’s Guide • Rev 01 7. Operations Quick Setup and Operations nìáÅâ=pÉíìé=~åÇ=léÉê~íáçåë For the optimum speed in setti ng up and operating your FSN Series swit cher , use the following steps. For reference, links are provi ded to the ap propriate sectio ns in this guide. 1. Connect power — Ensure that p ...

  • Barco 26-0702000-00 - page 309

    FSN Series • User ’s Guide • Rev 01 309 7. Operations Quick Setup and Operations 16. Save s ystem configurat ion — After completing all “system” setups, save the configuration and back up th e system. ~ Chapter 6, “ Saving the Setup , ” page 30 5. ~ Chapter 6, “ Backing up the System ,” page 305. 17. Set up Aux buse s — As req ...

  • Barco 26-0702000-00 - page 310

    310 FSN Series • User ’s Guide • Rev 01 7. Operations Quick Function Reference nìáÅâ=cìåÅíáçå=oÉÑÉêÉåÅÉ Use the following table to quickly access the prop er section for specif ic operating instructions. Both hyperlinks and page numbers are provided. T able 7-1. FSN Series Quick Function Reference T able T o learn abou t: U ...

  • Barco 26-0702000-00 - page 311

    FSN Series • User ’s Guide • Rev 01 3 1 1 7. Operations Understanding Butt on Color råÇÉêëí~åÇáåÖ=_ìííçå=`çäçê The tables in this section explain the use of color on the buttons in the M/E bank and the PGM bank. The rules apply t o the buttons on each ba nk’s PGM , PST and KEY buses. • PGM Bank Rules • M/E Bank Rules ...

  • Barco 26-0702000-00 - page 312

    312 FSN Series • User ’s Guide • Rev 01 7. Operations Understanding Swit cher Layers råÇÉêëí~åÇáåÖ=pïáíÅÜÉê=i~óÉêë T o help you understand FSN Series architecture f rom a production perspective, and to assist with the creation of switcher “looks,” the diagram be low illustrates how the various switcher banks are laye ...

  • Barco 26-0702000-00 - page 313

    FSN Series • User ’s Guide • Rev 01 313 7. Operations Understanding Switcher Layers • M/E 2 provides a “re -entry” outpu t that flo ws into the PGM b ank. • Please note: ~ On each M/E, the BG and PST buse s comprise the background layer — the farthest layer upstream, and visually , the layer that’s behind Key 1 and Key 2. ~ Key 1 ...

  • Barco 26-0702000-00 - page 314

    314 FSN Series • User ’s Guide • Rev 01 7. Operations Understanding Flip-fl op Mode råÇÉêëí~åÇáåÖ=cäáéJÑäçé=jçÇÉ On the FSN Series, the M/E and PGM banks operate in flip-flop mode. Thi s means that when you execute a CUT , WIPE or MIX transition in which BG is enabled, the sources on BG and PST exchange places when the t ...

  • Barco 26-0702000-00 - page 315

    FSN Series • User ’s Guide • Rev 01 315 7. Operations Understanding Tally råÇÉêëí~åÇáåÖ=q~ääó Buttons on the KEY , BG and PST buses obey the following rules with regard to tally: • Backlight — All buttons in th e bu s row s ar e normally dim, at the selected backlight level (as set on the User Preferences Menu ). When a butt ...

  • Barco 26-0702000-00 - page 316

    316 FSN Series • User ’s Guide • Rev 01 7. Operations Understand ing Error Messa ges råÇÉêëí~åÇáåÖ=bêêçê=jÉëë~ÖÉë Please note the following important rules rega rding error messages. • LOS (loss of signal): On occasion, you can exp erience LOS (loss of signal) — typically due to a poor video connecti on or computer co ...

  • Barco 26-0702000-00 - page 317

    FSN Series • User ’s Guide • Rev 01 317 7. Operations Working with Pop-ups tçêâáåÖ=ïáíÜ=mçéJìéë Please note the followi ng important rules regarding pop-ups: • When a pop-up includes a but ton, or a series of butt ons (e.g., {Y es} or {N o} ) you must acknowledge th e pop-up with a decisio n before any oth er operations can b ...

  • Barco 26-0702000-00 - page 318

    318 FSN Series • User ’s Guide • Rev 01 7. Operations Understanding Press an d Hold råÇÉêëí~åÇáåÖ=mêÉëë=~åÇ=eçäÇ Several buttons on the control panel offer “press an d hold” funct ionality . These functions are essentially menu short-cuts. Pl ease note the followin g important points: • A “press and hold” functio ...

  • Barco 26-0702000-00 - page 319

    FSN Series • User ’s Guide • Rev 01 319 7. Operations Understanding Lookahead Previ ew råÇÉêëí~åÇáåÖ=iççâ~ÜÉ~Ç=mêÉîáÉï The following topics are di scussed in this sectio n: • Lookahead Preview Over view • Lookahead Preview T utorial iççâ~ÜÉ~Ç=mêÉîáÉï=lîÉêîáÉï Each bank’s PVW (Preview) output ser ...

  • Barco 26-0702000-00 - page 320

    320 FSN Series • User ’s Guide • Rev 01 7. Operations Understanding Lookahead Previ ew iççâ~ÜÉ~Ç=mêÉî áÉï=qìíçêá~ä This tutorial provi des examples of PGM , PST and KEY bus selec tions, in combination with button selections in th e bank’s Next T ra nsition Group . The step s illustrate how these selections affect the looka ...

  • Barco 26-0702000-00 - page 321

    FSN Series • User ’s Guide • Rev 01 321 7. Operations Understanding Lookahead Previ ew bñ~ãéäÉ=OW==hbv=N=iççâ~ÜÉ~Ç  Use the following steps to learn how the KEY 1 butto n affects lookahead preview . 1. Press SEL to switch the key bus to KEY 1 . 2. Select GFX on the key bus. 3. In the Next T ransition Gr oup , press KEY 1 . This ...

  • Barco 26-0702000-00 - page 322

    322 FSN Series • User ’s Guide • Rev 01 7. Operations Understanding Lookahead Previ ew bñ~ãéäÉ=PW==hbv=O=iççâ~ÜÉ~Ç  Use the following steps to learn how the KEY 2 butto n affects lookahead preview . 1. Press SEL to switch the key bus to KEY 2 . 2. Select LOGO on the key bus. 3. In the Next T ransition Gr oup , press KEY 2 . This ...

  • Barco 26-0702000-00 - page 323

    FSN Series • User ’s Guide • Rev 01 323 7. Operations Understanding Lookahead Previ ew bñ~ãéäÉ=QW==_d=iççâ~ÜÉ~ÇI =qê~åëáíáçå=råÇÉê=hÉó  Use the following steps to see how the BG but ton affects lookahead preview , when one or more keys are on. 1. Select CAM 1 on the PS T bus (it should still be selected). 2. In the ...

  • Barco 26-0702000-00 - page 324

    324 FSN Series • User ’s Guide • Rev 01 7. Operations Understanding Lookahead Previ ew bñ~ãéäÉ=RW==`çãÄáåÉÇ=iççâ~ÜÉ~Ç  Use the following steps to see how a combinati on of buttons in the N ext T ransition Group affects lookahead preview . 1. In the Next T ransition Gr oup , press BG , KEY 1 and KEY 2 . This acti on arms a ...

  • Barco 26-0702000-00 - page 325

    FSN Series • User ’s Guide • Rev 01 325 7. Operations Understanding the T-Ba r and Transiti on LEDs råÇÉêëí~åÇáåÖ=íÜÉ=qJ_~ê=~åÇ=qê~åëáíáçå=ibaë This section describe s the function ality of the T- B a r and T ransition LEDs , which are identical for th e M/E and PGM ba nks. Figure 7-1 1. T -Bar and Transition LEDs Th ...

  • Barco 26-0702000-00 - page 326

    326 FSN Series • User ’s Guide • Rev 01 7. Operations Understanding the T-Bar and Transition LEDs • Automatic transitions can be paused: ~ Press AUTO TRAN to start the transition. ~ Press AUTO TRAN again, during the interval, t o pause the transition. Note tha t the T ransitio n LEDS are paused in between the limits. ~ Press AUTO TRAN to re ...

  • Barco 26-0702000-00 - page 327

    FSN Series • User ’s Guide • Rev 01 327 7. Operations Understanding the T-Ba r and Transiti on LEDs 6. Press AUT O TRAN to comp let e th e tra ns ition . The T ransition LEDs are all off, but the physical T- B a r remains a t 75%. In this situa tion, the T- B a r has no ef f ect on the video until you move it to ei ther limit. bñ~ãéäÉ=OW ...

  • Barco 26-0702000-00 - page 328

    328 FSN Series • User ’s Guide • Rev 01 7. Operations Using Re-entry rëáåÖ=oÉJÉåíêó The Re-entry buttons on the PGM bank enable you combine the contents of the M/E bank into the switcher ’s output. This holds true for the PGM , PST and KEY buses: • When M/E is select ed on the PGM bus, the ent ire output of the M/E bank is on pr ...

  • Barco 26-0702000-00 - page 329

    FSN Series • User ’s Guide • Rev 01 329 7. Operations Working with Cuts tçêâáåÖ=ïáíÜ=`ìíë A Cu t is an instant switch (or “take”) between two sources. There are two different ways to perform a cut:  Use the following steps to perform a cut, wit hout first previewin g th e next source: 1. On any PGM or BG bus, simply press ...

  • Barco 26-0702000-00 - page 330

    330 FSN Series • User ’s Guide • Rev 01 7. Operations Setting Transition Rat es and Curves pÉííáåÖ=qê~åëáíáçå=o~íÉë=~åÇ=`ìêîÉë The T ransition Menu enables you to change aut o t ransition rates and tr ansition curves. S Prerequisite — Ensure t hat you are familiar wit h the T ransitio n Menu . In Chapter 5, refer t o ...

  • Barco 26-0702000-00 - page 331

    FSN Series • User ’s Guide • Rev 01 331 7. Operations Working with Mixes tçêâáåÖ=ïáíÜ=jáñÉë A Mix (or “dissolve”) is a transition in which one video signal fa des out as another fades in. The transition is always from t he source on PGM (or BG ) to the source on PST . The following topics are di scussed in this sectio n: • ...

  • Barco 26-0702000-00 - page 332

    332 FSN Series • User ’s Guide • Rev 01 7. Operations Working wi th Wipes tçêâáåÖ=ïáíÜ=táéÉë A Wipe is a tr ansition in which one vide o signal i s replaced with another signal, using a selected pattern t o determine the edge betwe en the two sources. The transition is always from the source on PGM (or BG ) to the so urce on PST ...

  • Barco 26-0702000-00 - page 333

    FSN Series • User ’s Guide • Rev 01 333 7. Operations Working with Keys tçêâáåÖ=ïáíÜ=hÉóë A Key is a transition in wh ich one video signal is superimpo sed over a background video signal. One signal “cuts” the hole in the ba ckgrou nd, and another signa l “fills” the hole. S Prerequisites ~ Ensure that you are familiar wi ...

  • Barco 26-0702000-00 - page 334

    334 FSN Series • User ’s Guide • Rev 01 7. Operations Working with Keys hÉó=pÉíìé  Use the following steps to set up the key: 1. Navigate t o the Keyer Menu using one of the following two methods: ~ Arm the keyer that you wish to transitio n ( KEY 1 , KEY 2 or DSK ). Then, press and hold that specific Key button. This action places t ...

  • Barco 26-0702000-00 - page 335

    FSN Series • User ’s Guide • Rev 01 335 7. Operations Working with Keys j~åì~ä=jáñ=hÉó  Use the following steps to perform a manual mix key: 1. Ensure that t he key(s) you wish to transition are properly set up. Refer to the “ Key Setup ” section for details. 2. In the Next T ransition Grou p , select the layers that you wish to ...

  • Barco 26-0702000-00 - page 336

    336 FSN Series • User ’s Guide • Rev 01 7. Operations Working with Keys ^ìíçã~íáÅ=táéÉ=hÉó  Use the following steps to perform an au to matic wipe key: 1. Ensure that t he key(s) you wish to transition are properly set up. Refer to the “ Key Setup ” section for details. 2. In the Next T ransition Grou p , select the layers ...

  • Barco 26-0702000-00 - page 337

    FSN Series • User ’s Guide • Rev 01 337 7. Operations Working with Memory Registers tçêâáåÖ=ïáíÜ=jÉãçêó=oÉÖáëíÉêë This section provides instructions for workin g with memory registers. Three modes a re available: S tore, Recall and View . S Prerequisite — Ensure t hat you are familiar wit h the Memory Menu . In Chapte ...

  • Barco 26-0702000-00 - page 338

    338 FSN Series • User ’s Guide • Rev 01 7. Operations Working with Memory Registers of the butto ns in th e Program T ransition Section . This sna pshot is assigned a memory register number , from 1 to 1000. When you include the PGM button in a recal l function, the system immediately replaces all (or a portion of) the cu rrent Program bank s ...

  • Barco 26-0702000-00 - page 339

    FSN Series • User ’s Guide • Rev 01 339 7. Operations Working with Memory Registers The table below summarizes the functi ons you can perform in each mode: píçêáåÖ=jÉãçêó=oÉÖáëíÉêë When you store a memory registe r , you take a “snapshot” of the switcher and the selecte d modules. Once stored, you can not add data to th ...

  • Barco 26-0702000-00 - page 340

    340 FSN Series • User ’s Guide • Rev 01 7. Operations Working with Memory Registers píçêÉI=_óé~ëë=bå~ÄäÉëI=båíÉê=`ìëíçã=k~ãÉ  Use the following steps to store a memory register , bypass the Enables menu, and enter a custom register description: 1. Set up the switcher in the exact config uration that you want stored. ...

  • Barco 26-0702000-00 - page 341

    FSN Series • User ’s Guide • Rev 01 341 7. Operations Working with Memory Registers 11 . Enter the desired description and press {Enter } . 12. Press ENTER on the Keypad . The register is st ored, the Enables are set, and the custom description is also stored . Above the Keypad , the selected regist er number and the custom descript ion appea ...

  • Barco 26-0702000-00 - page 342

    342 FSN Series • User ’s Guide • Rev 01 7. Operations Working with Memory Registers oÉÅ~ääáåÖ=jÉãçêó=oÉÖáëíÉêë When you recall a memory register, you are re calling all (or part) of the stored regi ster ’s contents back to the switcher . Recalling a memory regist er and bypassing the Enables is an easy equation. Thi s me ...

  • Barco 26-0702000-00 - page 343

    FSN Series • User ’s Guide • Rev 01 343 7. Operations Working with Memory Registers 7. Repeat steps 5 and 6 for all remaining modules in which you want to adjust Enables. 8. Press ENTER on the Keypad . The register is now recalled, using t he adjusted Enables. Above the Keyp ad , the custom description appears i n the Memory Display , adjacen ...

  • Barco 26-0702000-00 - page 344

    344 FSN Series • User ’s Guide • Rev 01 7. Operations Working with Memory Registers sáÉïáåÖ=jÉãçêó=oÉÖáëíÉêë In the View Mod e , you can look at all memory registers, enter regist er descriptions, and view the status of all modules and Enables. Y ou cannot modify the modules or the Enables within a regist er , but you can l ...

  • Barco 26-0702000-00 - page 345

    FSN Series • User ’s Guide • Rev 01 345 7. Operations Working with Memory Registers ~ If currently unlocked, press { Lock Unlock} to lock the register. An “ X ” appears in the table cell under the Lock heading. The register can not be deleted or over-written. ~ If currently locked, press {Lock Unlock} to unlock the register and remove the ...

  • Barco 26-0702000-00 - page 346

    346 FSN Series • User ’s Guide • Rev 01 7. Operations Working with Aux Buses tçêâáåÖ=ïáíÜ=^ìñ=_ìëÉë The switcher ’s Aux Secti on enables you to route input sources and selected outputs to various “destination s.” S Prerequisites ~ Ensure that you are fam iliar with mapping and nam ing Aux outputs. In Chapter 6, refer to ...

  • Barco 26-0702000-00 - page 347

    FSN Series • User ’s Guide • Rev 01 347 7. Operations Selecting Clean Feed Out puts pÉäÉÅíáåÖ=`äÉ~å=cÉÉÇ=lìíéìíë The Clean Feed Setup Menu enables yo u to set clean feed outputs, and the source for th e ASSIGN button (in the control panel’s Aux Se ction ). S Prerequisites ~ Ensure that you are familiar with the Aux Secti ...

  • Barco 26-0702000-00 - page 348

    348 FSN Series • User ’s Guide • Rev 01 7. Operations Using Custom Co nt rol Fu nc tion s rëáåÖ=`ìëíçã=`çåíêçä=cìåÅíáçåë The Custom Control Section provides groups of buttons that can be programmed to perform various switcher funct i ons. S Prerequisites — Ensure that you ar e familiar with the Custom Control Section ...

  • Barco 26-0702000-00 - page 349

    FSN Series • User ’s Guide • Rev 01 349 7. Operations M/E 2 Control on the FSN-150 jLb=O=`çåíêçä=çå=íÜÉ=cpkJNRM M/E 2 control can be enabled or disabl ed on the FSN-150 using the M/E2 CTRL button in the Custom Control Section . When M/E 2 cont rol is enabled on the FSN-150, you have complete access to more creative swit cher “loo ...

  • Barco 26-0702000-00 - page 350

    350 FSN Series • User ’s Guide • Rev 01 7. Operations Backing Up and Rest oring the System _~ÅâáåÖ=ré=~åÇ=oÉëíçêáåÖ=íÜÉ=póëíÉã The following topics are di scussed in this sectio n: • Backing Up the System • Restoring the System _~ÅâáåÖ=ré=íÜÉ=póëíÉã The system backup procedur e enables you to store th ...

  • Barco 26-0702000-00 - page 351

    FSN Series • User ’s Guide • Rev 01 351 7. Operations Backing Up and Restoring the Syst em oÉëíçêáåÖ=íÜÉ=póëíÉã The system restore procedure enables you to res t ore the entire system setup from a USB drive back to the panel, including all me mory registers and the DVE shot box.  Use the following steps to restore the syste ...

  • Barco 26-0702000-00 - page 352

    352 FSN Series • User ’s Guide • Rev 01 7. Operations Backing Up and Rest oring the System ...

  • Barco 26-0702000-00 - page 353

    FSN Series • User ’s Guide • Rev 01 353 UK==asb=léÉê ~íáçåë få=qÜáë=`Ü~éíÉê This chapter provid es orientation and ope rating inst ructions for th e FSN Series’ opti onal internal DVE (digital video effect s) capa bility . The followi ng topics are discussed: • Introduction to the DVE • DVE Menu Orient ation • Assigni ...

  • Barco 26-0702000-00 - page 354

    354 FSN Series • User ’s Guide • Rev 01 8. DVE Operations Introduction to th e DVE fåíêçÇìÅíáçå=íç=íÜÉ=asb This section provid es an overview of th e DVE. The followin g topics are discussed: • DVE Workflow Overview • DVE Modes and Feat ure s • Multiple W ays to T rigger • DVE Effect Durations • DVE Morphing • DVE ...

  • Barco 26-0702000-00 - page 355

    FSN Series • User ’s Guide • Rev 01 355 8. DVE Op erations Introductio n to the DVE 3. Program DVE Effects — Using all available DVE tools, program and edit the desired effects on the DVE Menu . The best, most ef ficient method is: ~ S tore and name “shot box” keyframes for all of your desired posit ions, locations and looks. ~ Create e ...

  • Barco 26-0702000-00 - page 356

    356 FSN Series • User ’s Guide • Rev 01 8. DVE Operations Introduction to th e DVE ~ Keyframe on-air status ~ Shot box assignment status ~ Live (on-air) editing of “next” keyframe ~ Joystick, knob, or numeric function control • Adjustable PIP Size and Position ~ Size and position presets ~ Independent horizontal and vertical PIP size ad ...

  • Barco 26-0702000-00 - page 357

    FSN Series • User ’s Guide • Rev 01 357 8. DVE Op erations Introductio n to the DVE • Adjustable Color Effects ~ Keyframe overall brightne ss and contrast control ~ Individual RGB brightness and contrast control ~ Monochrome mode ~ Hue and saturat ion control ~ Invert mode on / of f • Adjustable Image Processing ~ De-interlace mode: adapt ...

  • Barco 26-0702000-00 - page 358

    358 FSN Series • User ’s Guide • Rev 01 8. DVE Operations Introduction to th e DVE • Automatic trigger — simplified proc edure: ~ Program the dual keyframe effect. ~ Enable the associated keyer on the M/E. ~ Select the desired transition (e. g., mix key , wipe key , etc.). If you don’t enable MIX or WIPE , only the effect will run. ~ En ...

  • Barco 26-0702000-00 - page 359

    FSN Series • User ’s Guide • Rev 01 359 8. DVE Op erations Introductio n to the DVE asb=bÑÑÉÅí=aìê~íáçåë The following rules apply t o DVE effect durations: • Each switcher bank and M/E has its own unique transition rate and curve, as controlled on the T ransition Menu . This rate governs how fast (o r sl ow) you can mix, wipe a ...

  • Barco 26-0702000-00 - page 360

    360 FSN Series • User ’s Guide • Rev 01 8. DVE Operations Introduction to th e DVE asb=`ççêÇáå~íÉ=pé~ÅÉ The “world” in which t he DVE channels (PIPs) live is a true mathematica l coordinate space. For example : • When the output fo rmat is set to 480i, the backgr ound space is 720 (w) x 487 (h) pixels in dimension. • When t ...

  • Barco 26-0702000-00 - page 361

    FSN Series • User ’s Guide • Rev 01 361 8. DVE Op erations Introductio n to the DVE gçóëíáÅâ=`çåíêçä When the DVE Menu is active, the Joysti ck controls many (but not all) imag e manipulation parameters. The following table details Joystick control in the vario us modes. Use the figure below for refe rence. Figure 8-2. Joystick A ...

  • Barco 26-0702000-00 - page 362

    362 FSN Series • User ’s Guide • Rev 01 8. DVE Operations DVE Menu Orientat ion asb=jÉåì=lêáÉåí~íáçå This section provides a detailed explanation of all DVE menus and fe atures. The followi ng topics are discussed: • DVE Assign Menu • DVE Main Menu — Size and Position Panel • Effect Setup Panel • Pan Zoom Source Panel ? ...

  • Barco 26-0702000-00 - page 363

    FSN Series • User ’s Guide • Rev 01 363 8. DVE Op erations DVE Menu Orient at io n asb=^ëëáÖå=jÉåì From the System Menu , press {DVE Assign} to display the DVE Assign Menu : Figure 8-3. DVE Assign Menu (sample) The DVE Assign Menu enables you to assig n DVE channel s to keyers. Once assigned, you can elect to use the DVE or bypass the ...

  • Barco 26-0702000-00 - page 364

    364 FSN Series • User ’s Guide • Rev 01 8. DVE Operations DVE Menu Orientat ion • In the DVE Assignment T able , a flow chart of all keyers is provided. For each keyer , you can assi gn a DVE ch annel to the “ cut ” sig nal, to the “ fill ” signa l, or t o both — depending on your requirements. A but ton is provided for each signa ...

  • Barco 26-0702000-00 - page 365

    FSN Series • User ’s Guide • Rev 01 365 8. DVE Op erations DVE Menu Orient at io n asb=j~áå=jÉåì=Ô=páòÉ=~åÇ=mçëáíáçå=m~åÉä In the Menu Bar , press the {DVE} but ton to display the main DVE menu — the Si ze and Position Panel : Figure 8-5. DVE Main Menu — Size and Position Panel (sample) The DVE Menu’s Siz e and Posi ...

  • Barco 26-0702000-00 - page 366

    366 FSN Series • User ’s Guide • Rev 01 8. DVE Operations DVE Menu Orientat ion `çããçå=asb=jÉåì=`çãéçåÉåíë The DVE Menu consists of five primary tabs along the Palette’s left hand side, a DVE St atus T able and Keyframe Editing Section (common to all tabs) at the top, and various common functions in the To o l B a r . T wo ...

  • Barco 26-0702000-00 - page 367

    FSN Series • User ’s Guide • Rev 01 367 8. DVE Op erations DVE Menu Orient at io n asb=pí~í ìë=q~ÄäÉ The figure below ill ustrates the DVE Status T abl e : Figure 8-6. DVE S tatus T able (sample) At the top of all DVE menus, the DVE Status T able provides the follo wing information: • Ch — Indicates the channel’s on/off status, a ...

  • Barco 26-0702000-00 - page 368

    368 FSN Series • User ’s Guide • Rev 01 8. DVE Operations DVE Menu Orientat ion • The Live LED indicates the keyframe’s state: ~ OFF = The keyframe is not on PGM or PST ~ GRN = The keyframe is on PST ~ RED = The keyframe is on PGM • The Effect KF control (either 1 or 2 ) is a button. Pressing t he blue button moves the yellow borde r fr ...

  • Barco 26-0702000-00 - page 369

    FSN Series • User ’s Guide • Rev 01 369 8. DVE Op erations DVE Menu Orient at io n current panel is retained, but all parameters for the new channel appear on the pan el . • For dual keyframe effects, press {Run Rever se} to run the ef fe ct from keyfra me 2 to 1. The button is grayed f or single keyframe effects, and grayed out when the ef ...

  • Barco 26-0702000-00 - page 370

    370 FSN Series • User ’s Guide • Rev 01 8. DVE Operations DVE Menu Orientat ion • Press {1/2} to set H Size to one-half native resoluti on H Size. • Press {3/4} to set H Size to three-quarters native resolution H Size. • Press {Full} to set H Size to the native resolution’ s H Size. mçëáíáçå=mêÉëÉíë The Position Pre set s ...

  • Barco 26-0702000-00 - page 371

    FSN Series • User ’s Guide • Rev 01 371 8. DVE Op erations DVE Menu Orient at io n j~åì~ä=páòÉ=~åÇ=mçëáíáçå • Press {H Size} or use the knob to change the PIP or key’s horizontal size. Remember that {H Size} and {V Size} track together if the {Lock} is enabled. • Press {V Size} or use the knob to change the PIP or key’s ...

  • Barco 26-0702000-00 - page 372

    372 FSN Series • User ’s Guide • Rev 01 8. DVE Operations DVE Menu Orientat ion bÑÑÉÅí=pÉíìé=m~åÉä The figure below ill ustrates the DVE’s Effect Setup Panel : Figure 8-10. DVE Ef fect Setup Panel (sample) The Effect Setup Panel enables you to create new DVE effects, add and delete keyframes, and clear keyfra mes. The following ...

  • Barco 26-0702000-00 - page 373

    FSN Series • User ’s Guide • Rev 01 373 8. DVE Op erations DVE Menu Orient at io n m~å=wççã=pçìêÅÉ=m~åÉä The figure below ill ustrates the DVE’s Pan Zoom Source Panel : Figure 8-1 1. DVE Pan Zoom Source Panel (sample) The Pa n Zoom Source Panel enables you to size and position the source image within the boundaries of the PI P . ...

  • Barco 26-0702000-00 - page 374

    374 FSN Series • User ’s Guide • Rev 01 8. DVE Operations DVE Menu Orientat ion • Press the {Lock} button to lock or unlock H and V source size tracking. When locked, both parameters track to gether . When unloc ked, H and V can be adjusted independently . Note that lock/unlock status is maintained for each DVE chan nel. • Press {Source H ...

  • Barco 26-0702000-00 - page 375

    FSN Series • User ’s Guide • Rev 01 375 8. DVE Op erations DVE Menu Orient at io n j~ëâ=m~åÉä The figure below ill ustrates the DVE’s Mask Panel : Figure 8-12. DVE Mask Panel (sample) The Mask Panel enabl es you to mask (crop) the top, bott om, left, and right edges of the PIP or key . Five convenient presets are av ailable, or you can ...

  • Barco 26-0702000-00 - page 376

    376 FSN Series • User ’s Guide • Rev 01 8. DVE Operations DVE Menu Orientat ion • Press {3:2} to mask the PIP (or key) to a 3:2 aspect ratio. • Press {1:1} to mask the PIP (or key) to a 1:1 aspect ratio. The following manual mask contro ls are provided: • Press {Mask T op} or use the a djacent knob to man ually mask the top edge of the ...

  • Barco 26-0702000-00 - page 377

    FSN Series • User ’s Guide • Rev 01 377 8. DVE Op erations DVE Menu Orient at io n _çêÇÉê=pÜ~Ççï=lé~Åáíó=m~åÉä The figure below ill ustrates the DVE’s Border Sha dow Op acity Panel : Figure 8-13. DVE Border Shadow Opacity Panel (sample) The Border Sh adow Opacity Panel enables you to add borders and shadows to the PI P , an ...

  • Barco 26-0702000-00 - page 378

    378 FSN Series • User ’s Guide • Rev 01 8. DVE Operations DVE Menu Orientat ion _çêÇÉê=pÉÅíáçå The following f unctions are provided in the Border Section : • Press {Border} to display t he Border Selection Keypad . Figure 8-14. Border Selection Keypad Six PIP border types are available. Sel ect the desired border type and press ...

  • Barco 26-0702000-00 - page 379

    FSN Series • User ’s Guide • Rev 01 379 8. DVE Op erations DVE Menu Orient at io n • Press {Borde r Lu ma} or use the adjacent knob to select the desired border luminance value. • Press {Wid th} or use the adjacent knob to sele ct the d esired border width. ~ If the {Border Unit s} button is set to Pixels , the button’s label reads “ ...

  • Barco 26-0702000-00 - page 380

    380 FSN Series • User ’s Guide • Rev 01 8. DVE Operations DVE Menu Orientat ion • Press {Shadow V Pos} or use the adjacent knob to adjust the shadow’s vertical position. • Press {Reset} to reset all shadow values to default. • Press {Shadow Effects} to display the two shad ow effect s value buttons. • Press {Shadow Luma} or use t he ...

  • Barco 26-0702000-00 - page 381

    FSN Series • User ’s Guide • Rev 01 381 8. DVE Op erations DVE Menu Orient at io n pÜçí=_çñ=jÉåì The figure below ill ustrates the DVE’s Shot Box Menu : Figure 8-15. DVE Shot Box Menu (sample) The Shot Box Menu enables you to store and name up to 128 individual “shots,” and apply them to a selected effect keyframe. A “shot” ...

  • Barco 26-0702000-00 - page 382

    382 FSN Series • User ’s Guide • Rev 01 8. DVE Operations DVE Menu Orientat ion The following shot box fu nctions are provided : • Select the desired keyframe in the Keyframe Editing Section ( 1 or 2 ), then select the desired shot box register. Once selected, the keyframe settings saved in the register are immediat ely copied into the sele ...

  • Barco 26-0702000-00 - page 383

    FSN Series • User ’s Guide • Rev 01 383 8. DVE Op erations DVE Menu Orient at io n ^Çî~åÅÉÇ=asb=jÉåì=Ô=`çäçê=bÑÑÉÅíë=m~åÉä The figure below ill ustrates the Advan ced DVE Menu , with the Color Effects Panel selected: Figure 8-16. Advanced DVE Menu - Color Effect s Panel (sample) The Color Effect s Panel enables you to a ...

  • Barco 26-0702000-00 - page 384

    384 FSN Series • User ’s Guide • Rev 01 8. DVE Operations DVE Menu Orientat ion • Press {RGB Contrast} t o adjust RGB contrast. Th ree value buttons appea r: ~ Use the {Red Contrast} button (or knob) to set red contrast. ~ Use the {Green Contrast} button (o r knob) to set g reen contrast. ~ Use the {Blue Contrast} bu tton (or knob) to set b ...

  • Barco 26-0702000-00 - page 385

    FSN Series • User ’s Guide • Rev 01 385 8. DVE Op erations DVE Menu Orient at io n ^Çî~åÅÉÇ=asb=jÉåì=Ô=asb=bñíê~ë=m~åÉä The figure below shows t he Advanced DVE Menu , with the DVE Extras Panel selected: Figure 8-17. Advanced DVE Menu - DVE Extras Panel (sample) The DVE Extras Panel enabl es you to adjust DVE processing, and ...

  • Barco 26-0702000-00 - page 386

    386 FSN Series • User ’s Guide • Rev 01 8. DVE Operations DVE Menu Orientat ion • If Motion Adaptive de-int erlacing is sele cted, press {Motion Threshold} to adjust the t hreshold of t he motion adap tive de-interlacer . Because adjustment is rarely required, it is recommended that you leave the functi on at its default settin g. Note that ...

  • Barco 26-0702000-00 - page 387

    FSN Series • User ’s Guide • Rev 01 387 8. DVE Op erations DVE Menu Orient at io n hÉóÑê~ãÉ=cêÉÉòÉ=_ÉÜ~îáçê The table below summarizes how the two freeze but tons, {KF Fr eeze} work together . T able 8-2. Image freeze behavior summary DVE Menu Setti ngs Effect Run (T ransition) Beha vio r KF 1 Freeze Run Freeze KF 2 Freeze Ru ...

  • Barco 26-0702000-00 - page 388

    388 FSN Series • User ’s Guide • Rev 01 8. DVE Operations DVE Menu Orientat ion asb=iáåâë The DVE Links f unction enables you to li nk two or more DVE channels together . When links are on, all linked channe ls are programme d as one. When lin ks are off, all assign ed DVE channels can be programmed individually . T o link or unlink chann ...

  • Barco 26-0702000-00 - page 389

    FSN Series • User ’s Guide • Rev 01 389 8. DVE Op erations Assigning DVE Chann els to Keyers • When a shot box keyframe is recalled, the keyframe settings are recal led into all linked DVE channels. • When saving to a shot box register fr om a linked DVE channel, the keyframe settings from the currently sel ected channel (not a ll linked ...

  • Barco 26-0702000-00 - page 390

    390 FSN Series • User ’s Guide • Rev 01 8. DVE Operations Selecting the Keyer Mode pÉäÉÅíáåÖ=íÜÉ=hÉóÉê=jçÇÉ On the Keyer Menu , when you se lect a keyer to whi ch a DVE is assigned, you can set the DVE mode to eit her PIP or Key , and turn the DVE itself on or off. S Prerequisite — Ensure t hat you are familiar wit h the K ...

  • Barco 26-0702000-00 - page 391

    FSN Series • User ’s Guide • Rev 01 391 8. DVE Op erations Programming DVE Effects mêçÖê~ããáåÖ=asb=bÑÑÉÅíë Programming a single channel or multi-channel D VE effect is a highly creative fu nction that brings all availabl e DVE image manip ulation “too ls” into play . S Prerequisite — Ensure that you are familiar with the ...

  • Barco 26-0702000-00 - page 392

    392 FSN Series • User ’s Guide • Rev 01 8. DVE Operations Programming DVE Effects h. Press {Back} to return to the m ain DVE Menu Palette . 3. S tore the keyframe in a shot box register: a. Press {Shot Box} to d isplay the Shot Box Menu . b. Select a register range using the “register panel” buttons (e.g., {1 - 32} ). c. Press {Save Shot ...

  • Barco 26-0702000-00 - page 393

    FSN Series • User ’s Guide • Rev 01 393 8. DVE Op erations Programming DVE Effects 6. S tore the keyframe in a shot box register: 7. Preview the entire dual keyf rame effect using the Forwa rd ( X ) and Reve rse ( W ) buttons. 8. Edit the effect as required. Refer to the “ Editing Keyframes ” section on page 394 for details. 9. Because th ...

  • Barco 26-0702000-00 - page 394

    394 FSN Series • User ’s Guide • Rev 01 8. DVE Operations Editing Keyframes bÇáíáåÖ=hÉóÑê~ãÉë Keyframe editing is t he ability to change one or more parameters of a given keyframe, within a single or dual keyfr am e effect. Wit h the DVE Menu , there are several very important rules with regard to keyframe editing: • Single key ...

  • Barco 26-0702000-00 - page 395

    FSN Series • User ’s Guide • Rev 01 395 8. DVE Op erations Editing Keyframes • The Shot Box KF field indi cates the shot box keyframe currently appl ied to either keyframe 1 or 2 . If the associated fi eld is blank, no shot b ox keyframe has been applied, or the shot box effect (that was previously applied) has been modified. The two DVE Ru ...

  • Barco 26-0702000-00 - page 396

    396 FSN Series • User ’s Guide • Rev 01 8. DVE Operations Automatic DVE Triggeri ng ^ìíçã~íáÅ=asb=qêáÖÖÉêáåÖ= As outlined in the “ Multiple W ays to T rigger ” section on page 357 at the beginning of th is chapter , there are three ways to tr igger dual keyframe DVE effects on the M/E: • Manually , u sing the T- B a r . ...

  • Barco 26-0702000-00 - page 397

    FSN Series • User ’s Guide • Rev 01 397 8. DVE Op erations Automatic DVE Tri ggering ^ìíçã~íáÅ=qêáÖÖÉêáåÖ=îá~=íÜÉ=`çåíêçä=m~åÉä= The FX TRIG (Effects T rigger) button i n the M/E’s Effects Group enables you to automatically run d ual keyframe DVE effects from t he control panel. Y ou can t rigger effects indivi ...

  • Barco 26-0702000-00 - page 398

    398 FSN Series • User ’s Guide • Rev 01 8. DVE Operations Automatic DVE Triggeri ng qêáÖÖÉê=pÉíìé=~åÇ=aáëéä~ó This section provides b asic information ab out trigger setup. There are three types of triggers that can be armed on the panel, and each has its own special label in the T ransition Display : • A “ Tr i g g e r o ...

  • Barco 26-0702000-00 - page 399

    FSN Series • User ’s Guide • Rev 01 399 8. DVE Op erations Automatic DVE Tri ggering jáñJâÉóJíêáÖÖÉê=qê~åëáíáçå T o arm a “mix-key-trigge r” transition: • Ensure that a dual keyframe DVE effect is loaded in the selecte d keyer(s). • Enable one or two keyers in the Next T ransition Group . The BG button can either b ...

  • Barco 26-0702000-00 - page 400

    400 FSN Series • User ’s Guide • Rev 01 8. DVE Operations Automatic DVE Triggeri ng ^ìíçã~íáÅ=asb=qêáÖÖÉê=oìäÉë This section outlines the important rules for using automat ic DVE triggers in the M/E. • Only dual keyframe DVE effects can be triggered. Ho wever , both single and d ual keyframe DVE effects can be mixed and wip ...

  • Barco 26-0702000-00 - page 401

    FSN Series • User ’s Guide • Rev 01 401 8. DVE Op erations Automatic DVE Tri ggering rëáåÖ=^ìíçã~íáÅ=asb=qêáÖÖÉêë= The following combinat ions of DVE triggers are discussed in this section : • T rigger an Effect on Keyer 1 Only • T rigger an Effect on Keyer 2 Only • T rigger Effect s on both Keyers • Mix Key and T ri ...

  • Barco 26-0702000-00 - page 402

    402 FSN Series • User ’s Guide • Rev 01 8. DVE Operations Automatic DVE Triggeri ng qêáÖÖÉê=~å=bÑÑÉÅí=çå=hÉóÉê=O=låäó  Use the follow ing steps to trigger a DVE effect on Keyer 2 only: 1. In the Next T ransition Grou p , press KEY 2 . 2. In the Effect s Group , press FX TRIG . The labe l “  FX ” appears in t he ...

  • Barco 26-0702000-00 - page 403

    FSN Series • User ’s Guide • Rev 01 403 8. DVE Op erations Automatic DVE Tri ggering jáñ=hÉó=~åÇ=qêáÖÖÉê=~å=bÑÑÉÅí=çå=hÉóÉê=N  Use the following steps to mix KEY 1 and simultaneously trigger its DVE effect: 1. In the Next T ransition Grou p , press KEY 1 . 2. In the Effect s Group , simultaneously press MIX and FX T ...

  • Barco 26-0702000-00 - page 404

    404 FSN Series • User ’s Guide • Rev 01 8. DVE Operations Automatic DVE Triggeri ng jáñ=hÉó=~åÇ=qêáÖÖÉê=bÑÑÉÅíë=çå=ÄçíÜ=hÉóÉêë  Use the following steps to mix KEY 1 and 2 , and simultaneousl y t rigger both effects: 1. In the Next T ransition Grou p , simultaneously press KEY 1 and KEY 2 . 2. In the Effect s Gr ...

  • Barco 26-0702000-00 - page 405

    FSN Series • User ’s Guide • Rev 01 405 8. DVE Op erations Automatic DVE Tri ggering jáñ=_d=~åÇ=hÉóÉê=OI=~åÇ=qê áÖÖÉê=bÑÑÉÅí=çå=hÉóÉê=O  Use the following steps to mix BG and KEY 2 , and tr igger the effect on keyer 2: 1. In the Next T ransition Grou p , simultaneously press BG and KEY 2 . 2. In the Effect s Grou ...

  • Barco 26-0702000-00 - page 406

    406 FSN Series • User ’s Guide • Rev 01 8. DVE Operations Automatic DVE Triggeri ng táéÉ=qêáÖÖÉê=léíáçåë The options for triggering wipe s are the same as triggering mixes — press WIPE + FX TRIG inste ad of MI X + FX TRI G , and you can perform the fo llowing transition s: • T rigger Keyer 1 and wi pe-k ey the PIP • T rig ...

  • Barco 26-0702000-00 - page 407

    FSN Series • User ’s Guide • Rev 01 407 8. DVE Op erations Automatic DVE Tri ggering q~é=fåI=q~é=lìí=cìåÅíáçåë Several advanced “tap in, tap out” functions are available that enable you to handle exceptions to the standard DVE trigger modes outline d in the previous sections. Using these advanced function s, you have greater ...

  • Barco 26-0702000-00 - page 408

    408 FSN Series • User ’s Guide • Rev 01 8. DVE Operations Automatic DVE Triggeri ng q~é=áåI=q~é=lìí=bñ~ãéäÉë= The following exampl es are provided in this section: • Mix KEY 1 and trigger KEY 2 • Mix BG , trigger KEY 1, mix-key-trigger KEY 2 • Wipe-key-trigger KEY 1, wipe KEY 2 jáñ=hbv=N=~åÇ=íêáÖÖÉê=hbv=O  Use ...

  • Barco 26-0702000-00 - page 409

    FSN Series • User ’s Guide • Rev 01 409 8. DVE Op erations Automatic DVE Tri ggering jáñ=_dI=íêáÖÖÉê=hbv=NI =ãáñJâÉóJíêáÖÖÉê=hbv=O  Use the following steps to mix BG , trigger KEY 1 and mix-key-trigger KEY 2 : 1. Program a background mix, and a “mix-key-trigg er” transition fo r both keyers: ~ In the Next T ransit ...

  • Barco 26-0702000-00 - page 410

    410 FSN Series • User ’s Guide • Rev 01 8. DVE Operations Automatic DVE Triggeri ng ...

  • Barco 26-0702000-00 - page 411

    FSN Series • User ’s Guide • Rev 01 4 1 1 VK==jìäíá îáÉ ï É ê=léÉê ~íáçåë få=qÜáë=`Ü~éíÉê This chapter provid es orientation and ope rating instruct ions for th e FSN Series’ opti onal internal Multiviewer ( MVR ). The following topics are discussed: • Introduction to the Multiviewer • Multiviewer Menu Orient ...

  • Barco 26-0702000-00 - page 412

    412 FSN Series • User ’s Guide • Rev 01 9. Multiviewer Operat ions Introduction to th e Multiviewer fåíêçÇìÅíáçå=íç=íÜÉ=jìäíáîáÉïÉê The FSN Series’ opt ional internal Mult iviewer ( MVR ) enables u sers to display up to 16 PI Ps in either single or dual monitor config urati ons. With the Multi viewer , you can assi ...

  • Barco 26-0702000-00 - page 413

    FSN Series • User ’s Guide • Rev 01 413 9. Multiviewer Operat ions Introduction to the Multiviewer • UMD text — the text that appe ars in the UMD can be changed or modified as desired, up to an eight charact er limit. • Clock — when a Multiviewer la yout includes a clock, the follo wing clo ck features are available: ~ The clock sourc ...

  • Barco 26-0702000-00 - page 414

    414 FSN Series • User ’s Guide • Rev 01 9. Multiviewer Operat ions Multiviewer Menu Orient ation jìäíáîáÉïÉê=jÉåì=lêáÉåí~íáçå This section provides a detailed explanation of all Multiviewer menus an d features. The following topi cs are discussed: • Multiviewer Setup Menu • Multiviewer Outp ut Setup Menu • Select L ...

  • Barco 26-0702000-00 - page 415

    FSN Series • User ’s Guide • Rev 01 415 9. Multiviewer Operat ions Multiviewer Menu Orientation jìäíáîáÉïÉê=pÉíìé=jÉåì From the System Menu , press {Multiviewer Setup } to show the Multiviewer Setu p Menu , a sample of which is shown be low . Figure 9-1. Multiviewer Setup Menu (sample) The Multiviewer Setup Menu enables you t ...

  • Barco 26-0702000-00 - page 416

    416 FSN Series • User ’s Guide • Rev 01 9. Multiviewer Operat ions Multiviewer Menu Orient ation • UMD T ext — Indicates the cu rrent text string shown in the corresponding UMD. Use the {UMD T ext} butto n to change the text (maximum eight charac ters). • Color — Indicates the specifi c color assigned to t he selected PIP’s UMD. Fou ...

  • Barco 26-0702000-00 - page 417

    FSN Series • User ’s Guide • Rev 01 417 9. Multiviewer Operat ions Multiviewer Menu Orientation jìäíáîáÉïÉê=lìíéìí=pÉíìé=jÉåì From the Multiviewer Setup Menu , press {Output Setup} to show t he Multivie wer Output Setup Menu . This menu sets the resolution for both MVR out puts. Figure 9-2. Multiviewer Output Setup Menu ...

  • Barco 26-0702000-00 - page 418

    418 FSN Series • User ’s Guide • Rev 01 9. Multiviewer Operat ions Multiviewer Menu Orient ation pÉäÉÅí=i~óçìí=jÉåì From the Multiviewer Setup Menu , press {Select Layout} to show the Select Layout Menu which enables you to select a pre-confi gured single or dual monitor layout. Figure 9-3. Multiviewer Select Single Layout Menu (s ...

  • Barco 26-0702000-00 - page 419

    FSN Series • User ’s Guide • Rev 01 419 9. Multiviewer Operat ions Multiviewer Menu Orientation The table below lists the available Single Monitor Output configurations; The table below lists the available Dual Monitor Output configurations; T able 9-1. Multiviewer Single Monitor Output Configurations # PIPs Layout # To t a l # P I P s Row 1 ...

  • Barco 26-0702000-00 - page 420

    420 FSN Series • User ’s Guide • Rev 01 9. Multiviewer Operat ions Multiviewer Menu Orient ation pÉäÉÅí=`çäçêë=jÉåì From the Multiviewer Setup Menu , press {Select Colors} to show the Select Colors Menu , which enables you to set colors for a full rang e of Multiviewer parameters. Figure 9-4. Multiviewer Select Colors Menu (sampl ...

  • Barco 26-0702000-00 - page 421

    FSN Series • User ’s Guide • Rev 01 421 9. Multiviewer Operat ions Multiviewer Menu Orientation Press {UMD Color 1} to select a speci fic color that can be a ssigned to any UMD. Use th e Color Wheel , the Color Chip s , the User Colors or the Knobs to select the desired color . Select colors for {UMD Color 2} , {UMD Color 3} and {UMD Color 4} ...

  • Barco 26-0702000-00 - page 422

    422 FSN Series • User ’s Guide • Rev 01 9. Multiviewer Operat ions Multiviewer Menu Orient ation ^ëëáÖå=pçìêÅÉ=hÉóé~Ç From th e Multiviewer Setup Menu , press {Assign Source} to display the Assign Source Keypad . This keypad enables you to assign a source to the highlighted PIP (as indi cated in the Multiviewer T able ). Figure ...

  • Barco 26-0702000-00 - page 423

    FSN Series • User ’s Guide • Rev 01 423 9. Multiviewer Operat ions Multiviewer Setup jìäíáîáÉïÉê=pÉíìé Comprehensive Multi viewer setup in structions a re provided in Chapter 6. Refe r to the “ Multiviewer Setup ” sect ion on page 301 for complete details. jìäíáîáÉïÉê=jÉãçêó Multiviewer setups and layouts (inc ...

  • Barco 26-0702000-00 - page 424

    424 FSN Series • User ’s Guide • Rev 01 9. Multiviewer Operat ions Multiviewer Memory ...

  • Barco 26-0702000-00 - page 425

    FSN Series • User ’s Guide • Rev 01 425 N MK==réÇ~íáåÖ=pçÑí ï ~ê É få=qÜáë=`Ü~éíÉê This chapter provides detailed instructions for updating FSN Series system sof tware. The following topi cs are discussed: • Sof tware Up date Overvi ew • Hardware Requirements • Downloadin g Software • Updating Control Panel Softwa ...

  • Barco 26-0702000-00 - page 426

    426 FSN Series • User ’s Guide • Rev 01 10. Updating Software Software Update Overview pçÑíï~êÉ=réÇ~íÉ=lîÉêîáÉï Firmware files for the FSN-1400 an d control panel are loaded into the hardware at power - up. These file s are stored in t he unit’s onboard flash memory . T wo diff erent update procedures can be performed: • ...

  • Barco 26-0702000-00 - page 427

    FSN Series • User ’s Guide • Rev 01 427 10. Updating Software Downloading Software açïåäç~ÇáåÖ=pçÑíï~êÉ T wo different methods can be used to download FSN Series software: • Via FTP Site • Via We b Si t e sá~=cqm=páíÉ Barco Folsom's FTP site address is: ftp.fol som.com  T o download sof tware from the FT P site: ...

  • Barco 26-0702000-00 - page 428

    428 FSN Series • User ’s Guide • Rev 01 10. Updating Software Downloading Soft ware sá~=tÉÄ=páíÉ Barco's web site address is: ww w .barco .com  T o download software from the web site: 1. Create a target folder on your PC (e.g., FS N Series), and ensure that your PC is connected to the inte rnet. 2. On the web, na vig at e to: h ...

  • Barco 26-0702000-00 - page 429

    FSN Series • User ’s Guide • Rev 01 429 10. Updating Software Updating Control Panel Sof tware réÇ~íáåÖ=`çåíêçä=m~åÉä=pçÑíï~êÉ  Use the following steps to update control panel software. 1. Ensure that the correct version of software has been properly downloaded fr om the website or the FTP site. If not, refer to the ? ...

  • Barco 26-0702000-00 - page 430

    430 FSN Series • User ’s Guide • Rev 01 10. Updating Software Updating FSN-1400 Software réÇ~íáåÖ=cpkJNQMM=pçÑíï~êÉ This procedure updates t he FSN-1400 software to match the control panel software. This step is required: • After installing a new software file in the control panel. • If the label “ Mismatch ” appears in th ...

  • Barco 26-0702000-00 - page 431

    FSN Series • User ’s Guide • Rev 01 431 ^K==péÉÅáÑáÅ~íáçåë få=qÜáë=^ééÉåÇáñ This appendix provides detailed technica l specifications for the FSN Series. The following topics are discussed: • System S pecificat ions Overview • Reference Video Input Specifications • Reference Video Output Specifications • Physica ...

  • Barco 26-0702000-00 - page 432

    432 FSN Series • User ’s Guide • Rev 01 ^K==péÉÅáÑáÅ~íáçåë System Specifications Overview póëíÉã=péÉÅáÑáÅ~íáçåë=lîÉêîáÉï The table below provides an overview of all FSN Series specifications. T able A-1. FSN Series S pecific ations Overview System Card Ty p e Format NIC 8 x SDI inputs 292M (HDTV), 259M- C ( ...

  • Barco 26-0702000-00 - page 433

    FSN Series • User ’s Guide • Rev 01 433 ^K==péÉÅáÑáÅ~íáçåë Reference Video Input Specifi cations oÉÑÉêÉåÅÉ=sáÇÉç=fåéìí=péÉÅáÑáÅ~íáçåë On the Reference and Output Setup Menu , wh en th e {Reference Input} button is set to External , one of t hree external ref erence signals can be connected: • SMPTE bi ...

  • Barco 26-0702000-00 - page 434

    434 FSN Series • User ’s Guide • Rev 01 ^K==péÉÅáÑáÅ~íáçåë Reference Video Out put Specification s oÉÑÉêÉåÅÉ=sáÇÉç=lìíéìí=péÉÅáÑáÅ~íáçåë On the Reference and Output Setup Menu , you can toggle the {Reference Out} but ton between T ri-Level Sync and Black Burst . Please not e: • The sync out format (a ...

  • Barco 26-0702000-00 - page 435

    FSN Series • User ’s Guide • Rev 01 435 ^K==péÉÅáÑáÅ~íáçåë Physical and Electrical Specifi cations mÜóëáÅ~ä=~åÇ=bäÉÅíêáÅ~ä=péÉÅáÑáÅ~íáçåë= cpkJNQMM The table below lists FSN-1400 physical and electrical specification s. cpkJNRM The table below lists FSN-150 physical and electrical specificati ons. T abl ...

  • Barco 26-0702000-00 - page 436

    436 FSN Series • User ’s Guide • Rev 01 ^K==péÉÅáÑáÅ~íáçåë Physical and Electrical Specificatio ns qçìÅÜ=pÅêÉÉå=aáëéä~ó The table below lists T ouch Screen Display physical and electrical specifications. qçìÅÜ=pÅêÉÉå=aáëéä~ó=pí~åÇ The table below lists T ouch Screen Display S tand physical specificat ...

  • Barco 26-0702000-00 - page 437

    FSN Series • User ’s Guide • Rev 01 437 ^K==péÉÅáÑáÅ~íáçåë Communications Specifi cations `çããìåáÅ~íáçåë=péÉÅáÑáÅ~íáçåë= The table below lists FSN Series communications specifications. ^ÖÉåÅó=péÉÅáÑáÅ~íáçåë= The table below lists FSN Series agency specifications. `~ÄäÉ=péÉÅáÑáÅ~í ...

  • Barco 26-0702000-00 - page 438

    438 FSN Series • User ’s Guide • Rev 01 ^K==péÉÅáÑáÅ~íáçåë Delay Specifications aÉä~ó=péÉÅáÑáÅ~íáçåë The following speci fications ar e provid ed in this section: • NIC Delay • UIC Delay kf`=aÉä~ó The table below summarizes the amount of delay in cu rred for a selected native inp ut in each of the three sync ...

  • Barco 26-0702000-00 - page 439

    FSN Series • User ’s Guide • Rev 01 439 ^K==péÉÅáÑáÅ~íáçåë Pinouts máåçìíë= The following topics are di scussed in this sectio n: • Analog 15-pin D Connector • DVI-I Connector • Ethernet Connector • Serial Connectors • T ally Connecto r • GPIO Connector ^å~äçÖ=NRJéáå=a=`çååÉÅíçê The figure below il ...

  • Barco 26-0702000-00 - page 440

    440 FSN Series • User ’s Guide • Rev 01 ^K==péÉÅáÑáÅ~íáçåë Pinouts asfJf=`çååÉÅíçê The figure below ill ustrates the DVI-I conn ecto r: Figure A-2. DVI-I connector The table below lists DVI-I connector pinouts. Please note: • T .M.D.S = T ransiti on Minimized Differential Signal • DDC = Display Data Channel T able A- 1 ...

  • Barco 26-0702000-00 - page 441

    FSN Series • User ’s Guide • Rev 01 441 ^K==péÉÅáÑáÅ~íáçåë Pinouts bíÜÉêåÉí=`çååÉÅíçê The figure below ill ustrates the Ethernet conn ector: Figure A-3. Ethernet connector The table below lists Ethernet connector pinouts. T able A- 15. Ethernet Connector Pinouts Pin Signal Wire Color 1 TX Data + White / Orange 2 TX ...

  • Barco 26-0702000-00 - page 442

    442 FSN Series • User ’s Guide • Rev 01 ^K==péÉÅáÑáÅ~íáçåë Pinouts pÉêá~ä=`çååÉÅíçêë The figure below ill ustrates the 9-pin D RS-232 serial connect or: Figure A-4. Serial 9-pin D connector The table below lists 9-pin D connector pinouts for the System Card ’s front serial RS-232 diagnostic port: The table below lis ...

  • Barco 26-0702000-00 - page 443

    FSN Series • User ’s Guide • Rev 01 443 ^K==péÉÅáÑáÅ~íáçåë Pinouts q~ääó=`çååÉÅíçê The figure below ill ustrates the Ta l l y connector . Figure A-5. T ally connector The table below lists Ta l l y connect or pinouts. T able A- 18. T ally connector p inouts Pin Signal Pin Signal 38 T ally 1 NO 5 T ally 1 C 22 Ta l l y 2 ...

  • Barco 26-0702000-00 - page 444

    444 FSN Series • User ’s Guide • Rev 01 ^K==péÉÅáÑáÅ~íáçåë Pinouts dmfl=`çååÉÅíçê The figure below ill ustrates the GPIO connector . Figure A-6. GPIO connector The table below lists GPIO connector pinouts. The figure below ill ustrates a generic GPO connection, wh ich could be used for any GPO circuit listed above: Figure ...

  • Barco 26-0702000-00 - page 445

    FSN Series • User ’s Guide • Rev 01 445 ^K==péÉÅáÑáÅ~íáçåë Input and Output Format Tables fåéìí=~åÇ=lìíéìí=cçêã~í=q~ÄäÉë The following tables are provided in this sect ion: • UIC Input and UOC Output Formats • NIC Input Formats, UI C Input Format s (BNC) • Output Format s rf`=fåéìí=~åÇ=rl`=lìíéì? ...

  • Barco 26-0702000-00 - page 446

    446 FSN Series • User ’s Guide • Rev 01 ^K==péÉÅáÑáÅ~íáçåë Input and Output Format Tables 1024x768 @47.95 RGB x x 1024x768 @48 RGB x x 1024x768 @50 RGB x x 1024x768 @59.94 RGB x x 1024x768 @60 RGB x x 1024x768 @70 RGB x x 1024x768 @71.93 RGB x x 1024x768 @72 RGB x x 1024x768 @75 RGB x x 1024x768 @85 RGB x x 1 152x864 @75 RGB x x 1 ...

  • Barco 26-0702000-00 - page 447

    FSN Series • User ’s Guide • Rev 01 447 ^K==péÉÅáÑáÅ~íáçåë Input and Output Format Tables 1364x768 @59.94 RGB x x 1364x768 @75 RGB x x 1364x1024 @47.95 RGB x x 1364x1024 @48 RGB x x 1364x1024 @50 RGB x x 1364x1024 @59.94 RGB x x 1364x1024 @75 RGB x x 1366x768 @50 RGB x x 1366x768 @59.94 RGB x x 1400x1050 @48 RGB x x 1400x1050 @50 ...

  • Barco 26-0702000-00 - page 448

    448 FSN Series • User ’s Guide • Rev 01 ^K==péÉÅáÑáÅ~íáçåë Input and Output Format Tables 1920x1080p @24 SMP TE, RGB x x x 1920x1080p @25 SMP TE, RGB x x x 1920x1080p @29.97 SMPTE, RGB x x x 1920x1080p @30 SMP TE, RGB x x x 1920x1080p @48 SMP TE, RGB x x 1920x1080p @50 SMP TE, RGB x x 1920x1080p II @50 SMP TE, RGB x x 1920x1080p @ ...

  • Barco 26-0702000-00 - page 449

    FSN Series • User ’s Guide • Rev 01 449 ^K==péÉÅáÑáÅ~íáçåë Input and Output Format Tables kf`=fåéìí=cçêã~íëI=rf`=fåéìí=cçêã~íë=E_k`F The table below lists the available inp ut formats supported on t he NIC, and the availabl e input formats supported on the UIC BNC co nnector . lìíéìí=cçêã~íë The table b ...

  • Barco 26-0702000-00 - page 450

    450 FSN Series • User ’s Guide • Rev 01 ^K==péÉÅáÑáÅ~íáçåë Input and Output Format Tables ...

  • Barco 26-0702000-00 - page 451

    FSN Series • User ’s Guide • Rev 01 451 _K==`çåí~Åí=fåÑçêã~íáçå få=qÜáë=^ééÉåÇáñ The following topics are di scussed in this Appen dix: • Wa r r a n t y • Return Material Au thorization (RMA) • Contact Information t~êê~åíó All video products are designed and tested to the high est quality standards and are ...

  • Barco 26-0702000-00 - page 452

    452 FSN Series • User ’s Guide • Rev 01 _K==`çåí~Åí=fåÑçêã~íáçå Contact Informat ion `çåí~Åí=fåÑçêã~íáçå Barco, Inc. 1 1 1 01 T rade Center Driv e Rancho Cordova, Califo rnia 95670 USA • Phone: (916) 859-2500 • Fax: (916) 859-2515 • Website: www .barco. com Sales Contact Information • Direct: (916) 859-25 0 ...

  • Barco 26-0702000-00 - page 453

    FSN Series • User ’s Guide • Rev 01 453 fåÇÉ ñ pçÑíâÉó ë=~åÇ=póãÄçäë + symbol, map column . . . . . . 205, 206, 24 2, 298 {1 > 2} . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253 {1-1 Samp le} . . . . . . . . . . . . . . . . . . . . . . . . . 217 {2 > 1} . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Barco 26-0702000-00 - page 454

    454 FSN Series • User ’s Guide • Rev 01 Index {DSK} . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 {Dual Outp ut Layout s} . . . . . . . . . . . . . . . . . . 418 {DVE 1 - 4} . . . . . . . . . . . . . . . . . . . . . . . . . . . 183 {DVE Assign Inf o} . . . . . . . . . . . . . . . . . . . . . 364 {DVE Assign} . . . . . . . ...

  • Barco 26-0702000-00 - page 455

    FSN Series • User ’s Guide • Rev 01 455 Index {PGM Bus} . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 {PGM Cle an} . . . . . . . . . . . . . . . . . . . . . 233, 234 {PGM Out } . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 {PIP} . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 {PST Bus} . . . . . . . . ...

  • Barco 26-0702000-00 - page 456

    456 FSN Series • User ’s Guide • Rev 01 Index {Un-Map} . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 {Update FSN-1400} . . . . . . . . . . . . . . . . 269, 430 {Update FSN-150 Flash} . . . . . . . . . . . . 26 9, 430 {Update Software} . . . . . . . . . . . . . . . . . 269, 429 {Update T ouch Screen} . . . . . . . . . . . . . 269 ...

  • Barco 26-0702000-00 - page 457

    FSN Series • User ’s Guide • Rev 01 457 Index tabl e, description . . . . . . . . . . . . . . . . . . 241 Auxiliary outp ut flexibility . . . . . . . . . . . . . . . . . 36 _ Background bus . . . . . . . . . . . . . . . . . . . . . . . . 82 Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315 Backspace . . . . . . . . . . . . ...

  • Barco 26-0702000-00 - page 458

    458 FSN Series • User ’s Guide • Rev 01 Index setup me nu . . . . . . . . . . . . . . . . . . . . . . . 232 Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97, 145 mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213 tally closu re . . . . . . . . . . . . . . . . . . . . . . . 238 text . . . . . . . . . . . . . . . . ...

  • Barco 26-0702000-00 - page 459

    FSN Series • User ’s Guide • Rev 01 459 Index a Date, set . . . . . . . . . . . . . . . . . . . . . . . . 256, 3 04 DC power out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 touch scre en . . . . . . . . . . . . . . . . . . . . . . 102 Decimal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 button . . . . . . . ...

  • Barco 26-0702000-00 - page 460

    460 FSN Series • User ’s Guide • Rev 01 Index keyframe editing section . . . . . . . . . . . . . 367 links . . . . . . . . . . . . . . . . . . . . . . . . . . . . 388 links keyp ad . . . . . . . . . . . . . . . . . . . . . . 369 live LED . . . . . . . . . . . . . . . . . . . . . . . . . 368 M/E bank trig gers . . . . . . . . . . . . . . . . . ...

  • Barco 26-0702000-00 - page 461

    FSN Series • User ’s Guide • Rev 01 461 Index c Factory default se ttings . . . . . . . . . . . . . . . . . . . . 275 default, re turn to . . . . . . . . . . . . . . . . . . . 283 reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 274 Fade t o black . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Fan . . . . . . . . . . . . ...

  • Barco 26-0702000-00 - page 462

    462 FSN Series • User ’s Guide • Rev 01 Index quick refe rence table . . . . . . . . . . . . . . . 310 Functional contro l panel sections . . . . . . . . . . 7 2 Functions aux setu p menu . . . . . . . . . . . . . . . . . . . 242 input me nu . . . . . . . . . . . . . . . . . . . . . . . 206 map bu ttons menu . . . . . . . . . . . . . . . . . ...

  • Barco 26-0702000-00 - page 463

    FSN Series • User ’s Guide • Rev 01 463 Index set transit ion rates and cu rves . . . . . . . . 330 set up ad vanced UOC paramete rs . . . . . 299 set up c lean feed ou tputs . . . . . . . . . . . . 290 set up c ommunications . . . . . . . . . . . . . . 285 set up k eys . . . . . . . . . . . . . . . . . . . . . . . 334 set up m ultiviewer clo ...

  • Barco 26-0702000-00 - page 464

    464 FSN Series • User ’s Guide • Rev 01 Index default . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 reset switch . . . . . . . . . . . . . . . . . . . . . . . 46 g Joystick . . . . . . . . . . . . . . . . . . . . . . . . . . . 71, 98 DVE control . . . . . . . . . . . . . . . . . . . . . . 361 tabl e . . . . . . . . . . . . . . . ...

  • Barco 26-0702000-00 - page 465

    FSN Series • User ’s Guide • Rev 01 465 Index tutorial . . . . . . . . . . . . . . . . . . . . . . . . . . . 320 Loop, re ference . . . . . . . . . . . . . . . . . . . . . . . . 47 LOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316 loss of signal . . . . . . . . . . . . . . . . . . . . . . 143 Loss of signal . . . . . . . ...

  • Barco 26-0702000-00 - page 466

    466 FSN Series • User ’s Guide • Rev 01 Index SYS module . . . . . . . . . . . . . . . . . . . . . . . 96 tabl e . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 view mod e . . . . . . . . . . . . . . . . . . . . . . . 174 view register s . . . . . . . . . . . . . . . . . . . . . 344 Menu advance d DVE . . . . . . . . . . . . . . . ...

  • Barco 26-0702000-00 - page 467

    FSN Series • User ’s Guide • Rev 01 467 Index select layout menu . . . . . . . . . . . . . . . . . 418 set clock . . . . . . . . . . . . . . . . . . . . . . . . . 256 setup . . . . . . . . . . . . . . . . . . . . . . . . 301, 423 setup me nu . . . . . . . . . . . . . . . . . . . 239, 415 tabl e . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Barco 26-0702000-00 - page 468

    468 FSN Series • User ’s Guide • Rev 01 Index DVE workflow . . . . . . . . . . . . . . . . . . . . . 354 FSN series . . . . . . . . . . . . . . . . . . . . . . . . 23 FSN-14 00 . . . . . . . . . . . . . . . . . . . . . . . . . 34 FSN-15 0 . . . . . . . . . . . . . . . . . . . . . . . . . . 68 lookahead preview . . . . . . . . . . . . . . . . ...

  • Barco 26-0702000-00 - page 469

    FSN Series • User ’s Guide • Rev 01 469 Index out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Programm able display . . . . . . . . . . . . . . . . 74, 81 Programming dual keyfram e DVE effect s . . . . . . . . . . . 392 DVE ef fects . . . . . . . . . . . . . . . . . . . . . . . 391 single keyfram e DVE effect s . . . . . . ...

  • Barco 26-0702000-00 - page 470

    470 FSN Series • User ’s Guide • Rev 01 Index shot box ke yframe . . . . . . . . . . . . . 382, 383 SA VE ALL . . . . . . . . . . . . . . . . . . . . . . . . . . . 348 Scale inpu ts . . . . . . . . . . . . . . . . . . . . . . . . . . 219 SDI H and V offset . . . . . . . . . . . . . . . . . . . . . 201 output tim ing . . . . . . . . . . . . . ...

  • Barco 26-0702000-00 - page 471

    FSN Series • User ’s Guide • Rev 01 471 Index menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 268 tabl e . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269 update c ontrol pan el . . . . . . . . . . . . . . . . 429 update o verview . . . . . . . . . . . . . . . . . . . 426 update, hardware requirements . . . . . . . 426 up ...

  • Barco 26-0702000-00 - page 472

    472 FSN Series • User ’s Guide • Rev 01 Index quick fun ction reference . . . . . . . . . . . . . 310 single monitor output, multi viewer . . . . . 41 9 softw are . . . . . . . . . . . . . . . . . . . . . . . . . 269 statu s, DVE . . . . . . . . . . . . . . . . . . . . . . . 367 statu s, system men u . . . . . . . . . . . . . . . . 192 summar ...

  • Barco 26-0702000-00 - page 473

    FSN Series • User ’s Guide • Rev 01 473 Index Underst anding button co lor . . . . . . . . . . . . . . . . . . . . . . . 31 1 error messages . . . . . . . . . . . . . . . . . . . 316 flip-flop mo de . . . . . . . . . . . . . . . . . . . . . 314 lookahead preview . . . . . . . . . . . . . . . . . 319 press and hold . . . . . . . . . . . . . . ...

  • Barco 26-0702000-00 - page 474

    474 FSN Series • User ’s Guide • Rev 01 Index u X-Axis Contr ol, Joystick . . . . . . . . . . . . . . . . . . 98 XLR Conn ector , script lights . . . . . . . . . . . . . . 99 v Y -Axis Control, Joystick . . . . . . . . . . . . . . . . . . 98 w Z-Axis Contro l, Joystick . . . . . . . . . . . . . . . . . . 98 ...

Fabricant Barco Catégorie Home Security System

Les documents que nous recevons du fabricant de l'appareilBarco 26-0702000-00 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Barco
- manuels d’utilisations 26-0702000-00
- fiches produit Barco
- dépliants
- ou étiquettes-énergie Barco 26-0702000-00
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Barco 26-0702000-00.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Barco 26-0702000-00, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Barco 26-0702000-00. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Barco 26-0702000-00.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Barco 26-0702000-00, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Barco 26-0702000-00 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Barco 26-0702000-00.

Le manuel d’utilisation complet Barco, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Barco 26-0702000-00 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Barco 26-0702000-00, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lBarco 26-0702000-00 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Barco 26-0702000-00 - qui devraient nous aider dans les premières étapes lors de l'utilisation Barco 26-0702000-00
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Barco 26-0702000-00
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Barco 26-0702000-00 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Barco 26-0702000-00?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Barco 26-0702000-00, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Barco 26-0702000-00 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)