Manuel d’utilisation ADTRAN NetVanta 1224R

13 pages 4.79 mb
Télécharger

Aller à la page of 13

Summary
  • ADTRAN NetVanta 1224R - page 1

    TECHNICAL SUPPORT NOTE Using the GUI to Configure a N etVanta 1224R/STR fo r Internet Access using an Ethernet Port (Cable or DSL modem) Featuring ADTRAN OS and the Web GUI _____________________________________________________________________________________ Introduction This Technical Support Note shows how to conf igure the NetVanta 1224R/STR for ...

  • ADTRAN NetVanta 1224R - page 2

    Step 2 – Setting up the Private VLAN Interface Click the “VLANs” link to setup the IP addresses for the unit. In the following diagrams, we will change the default IP address to 192.168.1.254. Note: When you submit the default IP address change, you will need to change your workstation IP address to match up with the new subnet and reconnect ...

  • ADTRAN NetVanta 1224R - page 3

    Change the IP address to 192.168.1.254. After changing the default VLAN interface IP address, be sure to change your workstation IP address to match this network. For example, you could use 192.168.1.1 as your workstation IP address with a default gateway of 192.168.1.254. ...

  • ADTRAN NetVanta 1224R - page 4

    Step 3 – Add a New VLAN for the Public Subnet (Port) The public VLAN will be configured in one of three different m odes, (A) IP Routing with a Static IP, (B) IP Routing using DHCP, or (C) PPPoE. DHCP is normally used when connected to a cable modem and PPPoE is often used when connected to a DSL m odem set in pass-through or bridge mode. The fol ...

  • ADTRAN NetVanta 1224R - page 5

    (Option A) – IP Routing with a Static IP Configuration. The IP address 100.100.100.2 is used as an example. The IP address information should have been provided to you by your Internet Service Provider (ISP). ...

  • ADTRAN NetVanta 1224R - page 6

    (Option B) – IP Routing Using DHCP. This is a typical cable modem setup. ...

  • ADTRAN NetVanta 1224R - page 7

    (Option C) – PPPoE (ADSL modem set to pass-through m ode) Set the Interface Mode to PPPoE and click “Apply”. Clicking “Apply” will open a new page to set PPPoE specific settings. ...

  • ADTRAN NetVanta 1224R - page 8

    (Option C) – PPPoE specific settings A username and password are required for PPPoE. Service Name and AC Nam e are rarely used but should be entered if provided by the ISP. P eer Authentication type should almost always be set to “None”. Also, PPPoE should be set for “Negotiated” IP address unless the ISP has specified a static IP address ...

  • ADTRAN NetVanta 1224R - page 9

    Step 4 – Adding a Default Route when using a Static IP Address This step is not required when learning a default route dynamically as in step 3 (option B) when we used DHCP. You need to add a static default route when using IP Routing with a static IP address or PPPoE with a static IP address. Click the “Route Table” link and then add a stati ...

  • ADTRAN NetVanta 1224R - page 10

    Step 5 – Assign an Ethernet Port to be a member of the Public VLAN In the example below, we are setting the first Ethernet port as a mem ber of VLAN 100 and setting it to “edgeport” mode to allow this port to come up im mediately. This port should be plugged into your Internet connection. Make sure your workstation is not plugged into this po ...

  • ADTRAN NetVanta 1224R - page 11

    Step 6-1. The first wizard page is just a warning that this will overwrite any previous firewall settings. Step 6-2. Select the public VLAN interface. In our example, this is VLAN 100. ...

  • ADTRAN NetVanta 1224R - page 12

    Step 6-3. This step will allow you to setup some basic port forwarding. Port forwarding can be done at a later date by adding policies to the “Public” Security Zone. Step 6-4. The final step is to confirm that the default VLAN 1 will share the IP address applied to the public VLAN 100. ...

  • ADTRAN NetVanta 1224R - page 13

    Step 7 – Save Your Changes The basic configuration should be complete after using the Firewall Wizard. Be sure to click “Save” after you make any configuration changes. This will ensure that the configuration will be maintained in the unit by storing it in the NVRAM. Step 8 – Consult Additional Documentation Additional Documentation is avai ...

Fabricant ADTRAN Catégorie Switch

Les documents que nous recevons du fabricant de l'appareilADTRAN NetVanta 1224R peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques ADTRAN
- manuels d’utilisations NetVanta 1224R
- fiches produit ADTRAN
- dépliants
- ou étiquettes-énergie ADTRAN NetVanta 1224R
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation ADTRAN NetVanta 1224R.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation ADTRAN NetVanta 1224R, manuels d’entretien, brefs manuels ou manuels de l’utilisateur ADTRAN NetVanta 1224R. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit ADTRAN NetVanta 1224R.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil ADTRAN NetVanta 1224R, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser ADTRAN NetVanta 1224R par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs ADTRAN NetVanta 1224R.

Le manuel d’utilisation complet ADTRAN, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel ADTRAN NetVanta 1224R - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières ADTRAN NetVanta 1224R, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lADTRAN NetVanta 1224R qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil ADTRAN NetVanta 1224R - qui devraient nous aider dans les premières étapes lors de l'utilisation ADTRAN NetVanta 1224R
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de ADTRAN NetVanta 1224R
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service ADTRAN NetVanta 1224R dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de ADTRAN NetVanta 1224R?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec ADTRAN NetVanta 1224R, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec ADTRAN NetVanta 1224R il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)