Italiano dropdown-ico

Manuale per l’uso Behringer MX2004A

26 pagine 1.52 mb
Scarica

Vai alla pagina of 26

Summary
  • Behringer MX2004A - page 1

    www.behringer.com Version 1.1 March 2001 User’s Manual ENGLISH EURORACK ® MX2004A ...

  • Behringer MX2004A - page 2

    2 EURORACK MX2004A This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclo- sure—voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and mainte- nance instructions in the accompanying literature. Read the manual. SA ...

  • Behringer MX2004A - page 3

    3 EURORACK MX2004A FOREWORD Dear Customer, Welcome to the team of EURORACK users and thank you very much for expressing your confidence in BEHRINGER products by purchasing this unit. It is one of my most pleasant tasks to write this letter to you, because it is the culmination of many months of hard work delivered by our engineering team to reach a ...

  • Behringer MX2004A - page 4

    4 EURORACK MX2004A EURORACK MX2004A Ultra low-noise 20-channel, 4-bus mixer s 8 mono input channels with gold-plated XLRs and phone connectors s 4 stereo input channels with balanced TRS connectors s 2 additional multi-functional stereo aux returns s Pre and post-fader aux sends for external effects devices and monitoring s Master aux sends with ga ...

  • Behringer MX2004A - page 5

    5 EURORACK MX2004A T ABLE OF CONTENTS 1 . INTRODUCTION ..................................................................................................................... 7 1. 1 Architecture ................................................................................................................ .................... 7 1. 2 Before you begin ...

  • Behringer MX2004A - page 6

    6 EURORACK MX2004A 7 . TECHNICAL BACKGROUND .............................................................................................. 20 7. 1 Mixing ...................................................................................................................... ..................... 2 0 7.1.1 Equalization ................................ ...

  • Behringer MX2004A - page 7

    7 EURORACK MX2004A 1. INTRODUCTION Congratulations. In purchasing our EURORACK you have acquired a mixer with incredible versatility and audio performance. Your EURORACK is built to the same outstanding quality as our top-of-the range console, the BEHRINGER EURODESK MX9000. Later we will see how adding the BEHRINGER ULTRALINK PRO MX882 to your syst ...

  • Behringer MX2004A - page 8

    8 EURORACK MX2004A 1.2 Before you begin 1.2.1 PSU (power supply unit) Any amplifier circuit is limited in its transient response by the available current. Every mixer has numerous line level operational amplifiers (op-amps) inside. When being driven hard, many desks begin to show signs of stress due to power supply limitations. Not so with the EURO ...

  • Behringer MX2004A - page 9

    9 EURORACK MX2004A For level-setting (as opposed to localized listening) select the mono PFL bus rather than the post-fader (post- channel pan) stereo solo bus (CHANNEL MODE global switch up). PFL/solo never interrupts the mix at the main recording outputs. It follows that aux sends must also be unaffected, since they contribute directly to the mai ...

  • Behringer MX2004A - page 10

    10 EURORACK MX2004A 2.5 Insert Insert points are useful for adding dynamic processing or equalization to a channel or the mix. Unlike reverbs etc., which are usually added to the dry signal, dynamic processing is normally applied across an entire signal. Here an aux send would be inappropriate. Instead the signal is intercepted somewhere along the ...

  • Behringer MX2004A - page 11

    11 EURORACK MX2004A 4.2 Stereo aux returns There are two additional stereo line inputs (aux returns 1 and 2) on your MX2004A. Aux returns 1 is perma- nently assigned to the main mix. If you connect a jack to the left socket only, the aux return 1 operates in mono. Aux return 2 can be switched between the main mix and the cue feed (aux send 1) via a ...

  • Behringer MX2004A - page 12

    12 EURORACK MX2004A 4.5 2-track input and output Input A 2-track input, on RCA connectors / , provides easy connection to DAT and other professional or semi-professional audio equipment. The 2-track input is primarily for auditioning mix playback from tape. The switch 2 TK routes this signal to the monitors and/or phones. However, it can also be ro ...

  • Behringer MX2004A - page 13

    13 EURORACK MX2004A 5. SETTING UP 5.1 Selecting inputs 1 ) Mono channels accept microphone or line inputs. If you are using the microphone input, make sure nothing is connected to the line input (and vice-versa). + The microphone inputs are more sensitive than the line inputs. Do not connect microphones with phantom power switched on. Never use unb ...

  • Behringer MX2004A - page 14

    14 EURORACK MX2004A 5.5 Multitrack initialization Set up the multitrack so that any track in “record ready” condition has its input monitored when the tape is stationary. Place all tracks to be recorded into “record ready” status. (Once a recording has been made, these tracks should automatically switch to tape playback. Check that the inpu ...

  • Behringer MX2004A - page 15

    15 EURORACK MX2004A K e y b o a r d M ixer S ourc e Mi c /Li ne Mono/ S tereo I nput MIDI I ns t rum ent #1 Line Mono 1 MIDI I ns t rum ent #2 Line Mono 2 MIDI I ns t rum ent #3 Line Mono 3 MIDI I ns t rum ent #4 Line Mono 4 MIDI I ns t rum ent #5 Line Mono 5 MIDI I ns t rum ent #6 Line Mono 6 MIDI I ns t rum ent #7 Line Mono 7 MIDI I ns t rum ent ...

  • Behringer MX2004A - page 16

    16 EURORACK MX2004A muddy FOH sound, as well as causing a reduction in feedback thresholds. Don ’ t forget to notch out trouble- some frequencies using a graphic or parametric equalizer, or feedback destroyer (see the BEHRINGER ULTRA-CURVE PRO DSP8024 or the FEEDBACK DESTROYER PRO DSP1124P, which do all of these and more). Use the low-cut filters ...

  • Behringer MX2004A - page 17

    17 EURORACK MX2004A Fig. 6.1: Project studio setup example 6. 4 Patchbay A patchbay allows to patch the audio signals of most components in your studio from a central point and send them to other units, which makes your entire cabling better structured and is indispensable for professional work. If you want to use your studio as effectively as poss ...

  • Behringer MX2004A - page 18

    18 EURORACK MX2004A 6.4.2 Parallel Fig. 6.2: Patchbay mode “parallel” In this mode, all terminals of one module are interconnected. This configuration doesn ’ t make sense at first glance but is used to split up and send one audio signal (e.g. a ux send) to several destinations (e.g. effects devices). 6.4.3 Half-normalled Fig. 6.3: Patchbay m ...

  • Behringer MX2004A - page 19

    19 EURORACK MX2004A and outputs are positioned on top of each other. Basically, the inputs are routed to the bottom and the outputs to the top rear-wall connectors. Avoid routing digital signals over a patchbay as the pulse signal used for the transmission of such signals causes heavy interference in analog signals. Additionally, normal patchbays c ...

  • Behringer MX2004A - page 20

    20 EURORACK MX2004A thus allows for recording both to the DAT recorder and the tape deck, simply by patching it accordingly. Modules 19 & 20 (tape deck) are open, because it does not make sense connecting the inputs and outputs of the tape deck. 21 & 22 are normalled and route the DAT recorder outputs to the 2-track inputs of the mixing con ...

  • Behringer MX2004A - page 21

    21 EURORACK MX2004A voices punch through a mix in a slightly unnatural but exciting way. In general corrective EQ usually involves broadband (slope) contouring, together with narrowband notching of unwanted resonances. The narrower the notch or “ Q ” , the less the total signal will be affected. Finding bad resonances is made easier by first fr ...

  • Behringer MX2004A - page 22

    22 EURORACK MX2004A AC Power In. For connecting the mixer to the power supply unit (PSU). Always connect mixer and PSU before you connect the PSU to the mains supply. POWER switch . Once the PSU is connected to the mains supply, you may switch on your EURORACK. Allow one minute after powering up for the system to equilibrate before setting input ga ...

  • Behringer MX2004A - page 23

    23 EURORACK MX2004A Fig. 8.1: Different connector types 8. INSTALLATION ...

  • Behringer MX2004A - page 24

    24 EURORACK MX2004A 8.3 Modifications The following modifications require you to do some soldering. Attempt only if you are experienced in using an iron on PCBs. Otherwise, refer to qualified personnel. After modification the BEHRINGER warranty becomes discretionary. Links should not be threaded into holes on the PCB. They should be soldered to the ...

  • Behringer MX2004A - page 25

    25 EURORACK MX2004A 9. SPECIFICATIONS Mono input channels Mic input electronically balanced, discrete input configuration Frequency response 10 Hz to 6 0 kHz, +/- 3 dB Distortion (THD & N) 0.007% @ +4 dBu, 1 kHz, bandwidth 80 kHz Mic E.I.N. (22 Hz - 22 kHz) -129.5 dBu, 150 Ohm source -117.3 dBqp, 150 Ohm source -132.0 dBu, input shorted -122.0 ...

  • Behringer MX2004A - page 26

    26 EURORACK MX2004A The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechni ...

Fabbricante Behringer Categoria Musical Instrument

I documenti che otteniamo dal fabbricante del dispositivoBehringer MX2004A possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Behringer
- manuali per l’uso MX2004A
- schede prodotto Behringer
- opuscoli
- o etichette energetiche Behringer MX2004A
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Behringer MX2004A.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Behringer MX2004A, manuali di manutenzione, brevi manuali o manuali utente Behringer MX2004A. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Behringer MX2004A.

Manuali per l’uso simili

Manuale completo del dispositivo Behringer MX2004A, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Behringer MX2004A dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Behringer MX2004A.

Il manuale per l’uso completo Behringer, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Behringer MX2004A - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Behringer MX2004A, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Behringer MX2004A che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Behringer MX2004A - che ci dovrebbe aiutare nei primi passi durante l'uso Behringer MX2004A
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Behringer MX2004A
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Behringer MX2004A in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Behringer MX2004A?

Utilizza il modulo sottostante

Se non hai risolto il problema con Behringer MX2004A con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Behringer MX2004A è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (1)

Pablo De Biaggio

please ne I need Behringer MX2004A in Spanish Vertion, thanks you