Manuale per l’uso Boss Audio Systems RC-20XL

40 pagine 1.29 mb
Scarica

Vai alla pagina of 40

Summary
  • Boss Audio Systems RC-20XL - page 1

    ...

  • Boss Audio Systems RC-20XL - page 2

    2 Copyright © 2004 BOSS CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSS CORPORATI ON. Contents Main features ............................................................................................. 3 Panel Descriptions ........................................... ...

  • Boss Audio Systems RC-20XL - page 3

    3 Main features ■ Simple and reliable loop play The new “loop quantize” function automatically adjusts the timing of the loop end. This makes it easy for anyone to create looped phrases of an accurate length. ■ Up to 16 minutes of extended phrase recording You can save up to eleven different loop phrases for a total of 16 minutes of recordi ...

  • Boss Audio Systems RC-20XL - page 4

    4 Panel Descriptions Front Panel fig.02-01 1 LEVEL Knob This knob adjusts the play volume of the phrase. * This knob does not adjust the input level from the INST/MIC/AUX IN jacks or the volume of the guide tone. 2 GUIDE Knob This knob adjusts the volume of the guide tone that sounds according to the tempo while a phrase is being recorded or played ...

  • Boss Audio Systems RC-20XL - page 5

    5 Panel Descriptions 4 MIC Knob This knob adjusts the input level from the MIC jack. INST Knob This knob adjusts the input level from the INST jack. PEAK Indicator This indicator will light when the level of the input is excessively high. 5 REVERSE Button Turn this button on (indicator lit) when you want the phrase to play back in reverse (p. 26). ...

  • Boss Audio Systems RC-20XL - page 6

    6 Panel Descriptions fig.02-02 11 POWER Indicator This indicator will light when the power is on. * When the batteries run down, the POWER indicator will become dim. When this occurs, please replace them with new batteries. 12 REC Indicator This indicator will light during recording. PLAY Indicator This indicator will light while a phrase is playin ...

  • Boss Audio Systems RC-20XL - page 7

    7 Panel Descriptions Rear Panel fig.02-03 15 INST Jack A guitar or other instrument can be connected to this jack. 16 MIC Jack Accepts connection of a microphone. Used when you wish to record a vocal or instrumental performance via a microphone. 17 AUX IN Jack Connect to the headphones jack of a CD or MD. 18 PHRASE SHIFT Jack If you wish to use a p ...

  • Boss Audio Systems RC-20XL - page 8

    8 Installing batteries Insert the included batteries as shown in the diagram, being careful to observe the correct polarity. fig.03-01 • Batteries are supplied with the unit. The life of these batteries may be limited, however, since their primary purpose was to enable testing. • When turning the unit upside-down, get a bunch of newspapers or m ...

  • Boss Audio Systems RC-20XL - page 9

    9 Making connections fig.04-01 * To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. * Use a cable from Roland to make the connection. If using some other make of connection cable, please note the following precautions. • Some connecti ...

  • Boss Audio Systems RC-20XL - page 10

    10 Making connections * Howling could be produced depending on the location of microphones relative to amp. This can be remedied by: 1. Changing the orientation of the microphone(s). 2. Relocating microphone(s) at a greater distance from speakers. 3. Lowering volume levels. * If the amp and microphone are close together, the sound played back from ...

  • Boss Audio Systems RC-20XL - page 11

    11 Making connections Important <Caution when turning off the power> Before you turn off the power, make sure that the following conditions are met. All saved data may be lost if the power is turned off inappropriately. • You must not be playing/recording/overdubbing a phrase (The REC, PLAY, and OVERDUB indicators must not be lit) • The W ...

  • Boss Audio Systems RC-20XL - page 12

    12 Recording a guitar or vocal performance to create a loop phrase On the RC-20XL, the process of recording an additional performance while a recorded performance plays back is called overdubbing . The performance from an instrument or microphone connected to the INST jack or MIC jack can be recorded to create a loop phrase. This lets you enjoy new ...

  • Boss Audio Systems RC-20XL - page 13

    13 Recording a guitar or vocal performance to create a loop phrase 1. Turn the PHRASE SELECT knob to select an empty phrase track 1–11. If there are any empty phrase tracks, both the LOOP PHRASE and ONE SHOT PHRASE indicators remain off. If there are no empty phrase tracks, or when the LOOP PHRASE and ONE SHOT PHRASE indicators flash, indicating ...

  • Boss Audio Systems RC-20XL - page 14

    14 Recording a phrase from CD/MD to create a loop phrase You can create a loop phrase by recording a performance from a CD or MD connected to the AUX IN jack. For example, you can record phrases from a sampling CD and overdub guitar or vocal onto it, or even record an entire song from an audio CD and use it for practicing. fig.06-01 1. Select an em ...

  • Boss Audio Systems RC-20XL - page 15

    15 Recording a phrase from CD/MD to create a loop phrase 1. Turn the PHRASE SELECT knob to select an empty phrase track 1–11. If there are any empty phrase tracks, both the LOOP PHRASE and ONE SHOT PHRASE indicators remain off. If there are no empty phrase tracks, or when the LOOP PHRASE and ONE SHOT PHRASE indicators flash, indicating that the m ...

  • Boss Audio Systems RC-20XL - page 16

    16 Recording a phrase from CD/MD to create a loop phrase 5. To have recording start simultaneously with playback of a CD or MD, set the AUTO START button to ON (with the indicator lit). When AUTO START button is on, stop the CD/MD player for now, and put it in playback-ready mode. 6. Press the left pedal to begin recording. If the AUTO START button ...

  • Boss Audio Systems RC-20XL - page 17

    17 Recording a phrase from CD/MD to create a loop phrase 9. Press the MODE button to select how overdubbing will occur. As you did in step 2, select the overdubbing method. If you wish to overdub a performance from guitar or mic, select INST & MIC. 10. Press the left pedal to begin playback. 11. When you wish to overdub (p. 12) along with the p ...

  • Boss Audio Systems RC-20XL - page 18

    18 Playing/overdubbing along with a saved phrase fig.06-02 1. Select a phrase track 2. Select the recording method 3. Adjust the recording level 4. (Adjust the tempo) 5. Start playback 6. Start/stop overdubbing 7. Stop playback 8. (Save the phrase) 1. Turn the PHRASE SELECT knob to select the phrase track in which the desired phrase is saved. The L ...

  • Boss Audio Systems RC-20XL - page 19

    19 Playing/overdubbing along with a saved phrase 3. Turn the MIC knob or INST knob to adjust the recording level. 4. If necessary, press the TAP TEMPO button several times to set the tempo. You can also set the tempo by pressing the right pedal instead of the TAP TEMPO button. * For details on setting the tempo, refer to “Setting the tempo” (p. ...

  • Boss Audio Systems RC-20XL - page 20

    20 Using the RC-20XL for practicing— Phrase Trainer When recording a song from CD or MD, you can erase vocals or guitar solos that locate at the center of the sound field. This function makes it easy to create “minus-one” data for practicing. You can also adjust the tempo while the phrase plays back. Changing the tempo of the song will not af ...

  • Boss Audio Systems RC-20XL - page 21

    21 Using the RC-20XL for practicing—Phrase Trainer * If an effect such as reverb has been applied to the sounds localized at the center, it may not be possible to erase the sound completely. 3. If you set the tempo before recording, press the TAP TEMPO button or the right pedal several times in time with the tempo of the phrase you wish to record ...

  • Boss Audio Systems RC-20XL - page 22

    22 Playing back in various ways Playing a phrase only once (One-shot Playback) Phrases saved to Phrase Tracks 1–11 are initially set to loop playback (with the LOOP PHRASE indicator lit), but you can switch the phrase settings to one-shot playback by holding down the SHIFT (EXIT) button and pressing the LOOP/ONE SHOT (AUTO START) button. This fea ...

  • Boss Audio Systems RC-20XL - page 23

    23 Playing back in various ways Selecting the Method of Stopping Playback (Stop Mode) Phrases stops playing immediately when the right pedal is pressed during playback of the phrase, but you can set the phrase to stop playing after fading out or after the end of the phrase is reached. You can use this function for natural-sounding fadeouts and to s ...

  • Boss Audio Systems RC-20XL - page 24

    24 Playing back in various ways Using the pedal to switch phrases (Phrase Shift) While a phrase is playing, you can press a pedal switch connected to the PHRASE SHIFT jack to switch to the phrase track of the following number. It is convenient to store the phrases in consecutive phrase tracks according to the order in which you intend to perform th ...

  • Boss Audio Systems RC-20XL - page 25

    25 Playing back in various ways • When you switch to a phrase set to One-Shot Playback, the phrase is played to the end, and then playback stops. • If you use Phrase Shift during One-Shot Playback, the phrase is played to the end, then the unit switches to the next phrase. The unit may not switch to the next phrase if you carry out Phrase Shift ...

  • Boss Audio Systems RC-20XL - page 26

    26 Playing back in various ways Play back a phrase backward (Reverse Playback) Playing a recorded phrase from the end toward the beginning is called “reverse playback.” The result is similar to playing a tape in reverse. By pressing the REVERSE button, lighting its indicator, you can use reverse playback. To return to normal playback, extinguis ...

  • Boss Audio Systems RC-20XL - page 27

    27 MEMO RC-20XL_e.book 27 ページ 2004年4月28日 水曜日 午後4時12分 ...

  • Boss Audio Systems RC-20XL - page 28

    28 Saving or deleting a phrase About memory The memory of the RC-20XL is divided into two areas: phrase tracks 1–11 and temporary memory. fig.08-01 A phrase that you record or overdub is first stored in temporary memory. The phrase stored in temporary memory is temporary, and will be erased when the following operations occur. • When you turn o ...

  • Boss Audio Systems RC-20XL - page 29

    29 Saving or deleting a phrase Saving a phrase When you have finished recording/overdubbing, or after you have edited the tempo or other settings of a phrase, you can save it. All phrases that have not been saved are lost when you turn off the power or select a different phrase track. fig.08-02 1. Press the WRITE button, getting the indicator to st ...

  • Boss Audio Systems RC-20XL - page 30

    30 Saving or deleting a phrase <CAUTION> • Never turn off the RC-20XL’s power while the WRITE indicator or the EXIT indicator is lit. Doing so will cause all data saved in the phrase tracks to be lost. • Please be aware that the contents of memory can be irretrievably lost as a result of a malfunction, or the improper operation of the u ...

  • Boss Audio Systems RC-20XL - page 31

    31 Saving or deleting a phrase Erasing a saved phrase (Delete) fig.08-03 1. Turn the PHRASE SELECT knob to select the phrase track that you wish to delete. 2. Simultaneously press the SHIFT (EXIT) button and the DELETE (WRITE) button to get both indicators to flash. The RC-20XL will be ready to delete the data. 3. Press the DELETE (WRITE) button to ...

  • Boss Audio Systems RC-20XL - page 32

    32 About the tempo and time signature The RC-20XL allows you to set the tempo and time signature separately for each phrase. These settings also determine how the guide tone will play, and how loop quantization will occur. This means that if the tempo and time signature are correctly set before recording, it will be easy to create a correct loop ph ...

  • Boss Audio Systems RC-20XL - page 33

    33 About the tempo and time signature Setting the tempo If you are recording a performance from an instrument or microphone connected to the INST or MIC jacks, set the tempo before recording. You can change the tempo for playing back the stored phrase. * If you change the playback tempo, then store the phrase, the modified tempo will be stored. If ...

  • Boss Audio Systems RC-20XL - page 34

    34 About the tempo and time signature Setting the time signature If you are recording a phrase with a time signature of other than 4/4, set the correct time signature before recording. * It is not possible to change the time signature after recording. * It is not possible to set a time signature whose denominator is anything other than 4. fig.09-03 ...

  • Boss Audio Systems RC-20XL - page 35

    35 About the guide tone A guide tone will sound while you are playing or recording a phrase. fig.10-01 The volume of the guide tone can be adjusted with the GUIDE knob. If you do not wish to hear the guide tone, turn the GUIDE knob to the OFF position. If you wish to change the sound of the guide tone, hold down the SHIFT (EXIT) button and press th ...

  • Boss Audio Systems RC-20XL - page 36

    36 Troubleshooting Power does not turn on • Is an amp or speaker connected to the OUTPUT jack? ➔ If you are using batteries, the power will not turn on unless an amp or speaker is connected to the OUTPUT jack. Check the connections (p. 9). • Have the batteries run down? ➔ Install new batteries (p. 8). • Is the correct AC adaptor (sold sep ...

  • Boss Audio Systems RC-20XL - page 37

    37 Troubleshooting Recorded a short phrase, but the length of the phrase has changed ➔ The minimum length of time required for a loop phrase is approximately 1.5 seconds. If the phrase you’ve recorded is shorter than that, the length is automatically multiplied by a factor of two, four, eight, or more until it reaches an acceptable length. Unab ...

  • Boss Audio Systems RC-20XL - page 38

    38 Specifications Nominal Input Level INST: -20 dBu (variable) MIC: -40 dBu (variable) AUX IN: -10 dBu Input Impedance INST: 1 M Ω MIC: 1 k Ω AUX IN: 47 k Ω Nominal Output Level OUTPUT: -20 dBu Output Impedance 1 k Ω Recommended Load Impedance 10 k Ω or greater Internal Memory Recording time: 16 min. (max.) Maximum number of saved phrases ...

  • Boss Audio Systems RC-20XL - page 39

    39 Index A AUTO START ................................... 13, 16, 21 B Batteries ........................................................... 8 C CENTER CANCEL ................................ 15, 20 Clear ................................................... 17, 19, 28 Connections .................................................... 9 D Delete ...... ...

  • Boss Audio Systems RC-20XL - page 40

    G6017384 This product complies with the requirements of European Directive 89/336/EEC. For EU Countries For Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. ...

Fabbricante Boss Audio Systems Categoria DVR

I documenti che otteniamo dal fabbricante del dispositivoBoss Audio Systems RC-20XL possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Boss Audio Systems
- manuali per l’uso RC-20XL
- schede prodotto Boss Audio Systems
- opuscoli
- o etichette energetiche Boss Audio Systems RC-20XL
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Boss Audio Systems RC-20XL.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Boss Audio Systems RC-20XL, manuali di manutenzione, brevi manuali o manuali utente Boss Audio Systems RC-20XL. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Boss Audio Systems RC-20XL.

Manuali per l’uso simili

Manuale completo del dispositivo Boss Audio Systems RC-20XL, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Boss Audio Systems RC-20XL dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Boss Audio Systems RC-20XL.

Il manuale per l’uso completo Boss Audio Systems, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Boss Audio Systems RC-20XL - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Boss Audio Systems RC-20XL, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Boss Audio Systems RC-20XL che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Boss Audio Systems RC-20XL - che ci dovrebbe aiutare nei primi passi durante l'uso Boss Audio Systems RC-20XL
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Boss Audio Systems RC-20XL
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Boss Audio Systems RC-20XL in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Boss Audio Systems RC-20XL?

Utilizza il modulo sottostante

Se non hai risolto il problema con Boss Audio Systems RC-20XL con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Boss Audio Systems RC-20XL è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)