Italiano dropdown-ico

Manuale per l’uso Axis Communications A1001

63 pagine 1.76 mb
Scarica

Vai alla pagina of 63

Summary
  • Axis Communications A1001 - page 1

    AXIS A1 00 1 Network Door Controller & AXIS Entry Manager User Manual ...

  • Axis Communications A1001 - page 2

    About this Document This manual is intended for administrators and users of AXIS A1 001 Network Door Controller and is applicable to AXIS Entry Manager and rmware 1.25 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge o ...

  • Axis Communications A1001 - page 3

    the product shall be grounded either through a shielded network cable (STP) or other appropriate method. The power supply used with this product shall fulll the requirements for Safety Extra Low V oltage (SEL V) and Limited P ower Source (LPS) according to IEC/EN/UL 60950-1. Disposal and Recycling When this product has reached the end of its use ...

  • Axis Communications A1001 - page 4

    AXIS A1001 Network Door Controller & AXIS Entry Manager T able of Contents Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Connectors and Buttons . . . . . . . . . . . . . . ...

  • Axis Communications A1001 - page 5

    AXIS A1001 Network Door Controller & AXIS Entry Manager Hardware Overview Hardware Overview The hardware overview is divided into the following categories: • Front and back. See page 5 . • I/O interface. See page 6 . • External power inputs. See page 6 . • P ower outputs. See page 6 . • LED indicators, buttons and other hardware. See ...

  • Axis Communications A1001 - page 6

    AXIS A1001 Network Door Controller & AXIS Entry Manager Hardware Overview 1 2 3 4 5 6 7 8 9 10 1 1 1 2 I/O interface: 1 Reader data connector (READER DAT A 1) 1 0 Reader data connector (READER DAT A 2) 3 Reader I/O connector (READER I/O 1) 8 Reader I/O connector (READER I/O 2) 4 Door connector (DOOR IN 1) 7 Door connector (DOOR IN 2) 6 Auxiliar ...

  • Axis Communications A1001 - page 7

    AXIS A1001 Network Door Controller & AXIS Entry Manager Hardware Overview 1 2 3 4 5 6 7 8 9 10 1 1 1 2 1 3 LED indicators, buttons and other hardware: 1 P ower LED indicator 2 Status LED indicator 3 Network LED indicator 4 Reader 2 LED indicator (not used) 5 Reader 1 LED indicator (not used) 6 T ampering alarm pin header – front (TF) 7 T ampe ...

  • Axis Communications A1001 - page 8

    AXIS A1001 Network Door Controller & AXIS Entry Manager Hardware Overview Green Steady when not energized. Red Steady when energized. Lock Unlit Floating. Note • The Status LED can be congured to ash while an event is active. • The Status LED can be congured to ash for identifying the unit. Go to Setup > Additional Controller ...

  • Axis Communications A1001 - page 9

    AXIS A1001 Network Door Controller & AXIS Entry Manager Hardware Overview P ower Outputs P ower Lock Connector 4-pin terminal block for connecting one or two locks. The lock connector can also be used to power external devices. For specications, see page 60 . P ower & Relay Connector 6-pin terminal block for connecting power and the door ...

  • Axis Communications A1001 - page 10

    AXIS A1001 Network Door Controller & AXIS Entry Manager Access the Product Access the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows, Safari with Macintosh and Firefox wit ...

  • Axis Communications A1001 - page 11

    AXIS A1001 Network Door Controller & AXIS Entry Manager Access the Product The Overview P age The Overview page in AXIS Entry Manager shows information about the door controller’s name, MAC address, IP address, and rmware version. It also enables you to identify the door controller on the network or in the system. The rst time you acces ...

  • Axis Communications A1001 - page 12

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Configuration System Configuration To open the product’s Setup pages, click Setup in the top right-hand corner of the Overview page. The Axis product can be congured by administrators. For more information about users and administrators, see page 24 , page 29 , and page 4 1 . ...

  • Axis Communications A1001 - page 13

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Configuration Note • When you switch languages, the date format also changes to a format commonly used in the selected language. The correct format is displayed in the data elds. • If you reset the product to factory default settings, AXIS Entry Manager switches back to Engl ...

  • Axis Communications A1001 - page 14

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Configuration Create a New Hardware Conguration To create a new hardware conguration from the beginning: 1. Go to Setup > Hardware Conguration and click Start new hardware conguration . If the product’s hardware has not been congured before or has been deleted, ...

  • Axis Communications A1001 - page 15

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Configuration - Open circuit = Open door – Select if the door monitor circuit is normally closed. The door monitor gives the door open signal when the circuit is open. The door monitor gives the door closed signal when the circuit is closed. • Cancel access time once door is op ...

  • Axis Communications A1001 - page 16

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Configuration - Open circuit = Locked – Select if the lock monitor circuit is normally closed. The lock monitor gives the door unlocked signal when the circuit is closed. The lock monitor gives the door locked signal when the circuit is open. - Open circuit = Unlocked – Select ...

  • Axis Communications A1001 - page 17

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Configuration 1. Install end of line resistors on all the used inputs. See the connection diagram on page 62 . 2. Go to Setup > Hardware Reconguration and select Enable supervised inputs . You can also enable supervised inputs during the hardware conguration. Supervised In ...

  • Axis Communications A1001 - page 18

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Configuration • Set the date and time manually . See page 18 . • Get the date and time from the computer . See page 18 . Current controller time displays the door controller’s current date and time (24h clock). The same options for date and time are also available in the Syst ...

  • Axis Communications A1001 - page 19

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Configuration Basic T CP/IP Settings The Axis product supports IP version 4 (IPv4). The Axis product can get an IPv4 address in the following ways: • Dynamic IP address – Obtain IP address via DHCP is selected by default. This means that the Axis product is set to get the IP ad ...

  • Axis Communications A1001 - page 20

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Configuration Important • All changes to card formats apply to the whole system of door controllers. • Y ou can only enable and disable card formats if at least one door controller in the system has been congured with at least one reader . See Congure the Hardware on page ...

  • Axis Communications A1001 - page 21

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Configuration - BinBE2Hex – Binary data is encoded as hex-lowercase numbers in big endian byte order . The hexadecimal system, also known as the base-16 number system, consists of 16 unique symbols: the numbers 0–9 and the letters a–f. Big endian byte order means that in a mu ...

  • Axis Communications A1001 - page 22

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Configuration • Name – The user-dened name of the door controller . If the administrator has not set a name when conguring the hardware, the default name will be shown. • IP address • MAC address • Status – The door controller from which you access the system will ...

  • Axis Communications A1001 - page 23

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Configuration 3. After the hardware conguration has been reset, go to Setup > Manage Network Door Controllers in System . 4. In the Network door controllers in system list, identify the door controller that you want to remove and click Remove from system . 5. A dialog opens r ...

  • Axis Communications A1001 - page 24

    AXIS A1001 Network Door Controller & AXIS Entry Manager Access Management Access Management About Users In AXIS Entry Manager , users are people who have been registered as owners of one or more tokens (identication types). Each person must have a unique user prole to be granted access to doors in the access control system. The user pro? ...

  • Axis Communications A1001 - page 25

    AXIS A1001 Network Door Controller & AXIS Entry Manager Access Management 8. Add users to groups. For applied examples of this workow , see Example Access Schedule Combinations on page 3 1 . Create and Edit Access Schedules Access schedules are used to dene general rules for when doors can and cannot be accessed. They are also used to de? ...

  • Axis Communications A1001 - page 26

    AXIS A1001 Network Door Controller & AXIS Entry Manager Access Management cannot override that identication type schedule. However , if a group schedule is more restrictive about access than the identication type schedule, the group schedule overrides the identication type schedule. Identication type schedules and group schedules ca ...

  • Axis Communications A1001 - page 27

    AXIS A1001 Network Door Controller & AXIS Entry Manager Access Management Create and Edit Groups Groups allow you to manage users and their access rights collectively and efciently . A group consists of credentials that tell the system which users the group consists of and when and how the group members are granted access to the doors. Each ...

  • Axis Communications A1001 - page 28

    AXIS A1001 Network Door Controller & AXIS Entry Manager Access Management If both identication types Card number only and PIN only are added, users can choose to either swipe their card or enter their pin to access the door . But if, instead, only the identication type Card number and PIN is added, users must both swipe their card and ent ...

  • Axis Communications A1001 - page 29

    AXIS A1001 Network Door Controller & AXIS Entry Manager Access Management 4. Select the Unlock state ( unlocked or unlock both locks depending on whether the door has one or two locks). 5. Click OK . 6. Apply the predened Ofce hours access schedule to the Scheduled unlock state. To verify when the door is unlocked, click . To delete a sch ...

  • Axis Communications A1001 - page 30

    AXIS A1001 Network Door Controller & AXIS Entry Manager Access Management 4. Click Save . 5. Drag the user to one or more groups in the Groups list. If the Groups list is empty , create a new group. See Create and Edit Groups on page 27 . To expand an item in the Users list and view a user’s credentials, click . To nd a specic user , en ...

  • Axis Communications A1001 - page 31

    AXIS A1001 Network Door Controller & AXIS Entry Manager Access Management 1. Go to Setup > Import Users . 2. Locate and select the *.csv or *.txt le that holds the list of users. 3. Select the correct credential option for each column. 4. To import the users to the system, click Import users . 5. Verify that each column contains the corre ...

  • Axis Communications A1001 - page 32

    AXIS A1001 Network Door Controller & AXIS Entry Manager Access Management 2. Create a day shift hours Schedule item that recurs Monday–Friday , 06:00–16:00. 3. Create two groups, one Group called Guards and one Group called Day shift personnel . See page 27 . 4. Drag the predened Always access schedule to the Guards group. 5. Drag the Da ...

  • Axis Communications A1001 - page 33

    AXIS A1001 Network Door Controller & AXIS Entry Manager Alar m and Event Configuration Alar m and Event Configuration Events that occur in the system, for example when a user swipes a card or a REX device is activated, are logged in the event log. Logged events can be congured to trigger alarms and such alarms are logged in the alarm log. ...

  • Axis Communications A1001 - page 34

    AXIS A1001 Network Door Controller & AXIS Entry Manager Alar m and Event Configuration Important Each time that you enable or disable global events, the event log is cleared. This means that all events before that moment are removed and the event log starts over . Alarms can also be congured to trigger actions such as email notications. ...

  • Axis Communications A1001 - page 35

    AXIS A1001 Network Door Controller & AXIS Entry Manager Alar m and Event Configuration 6. Under Actions , select Send Notication from the Type drop-down list. 7. Select an email recipient from the drop-down list. See Add Recipients on page 37 . The following example describes how to set up an action rule to activate an output port when the ...

  • Axis Communications A1001 - page 36

    AXIS A1001 Network Door Controller & AXIS Entry Manager Alar m and Event Configuration - Area Removed – Not supported by this version of AXIS Entry Manager . Must be congured by a client such as an access management system, through the VAPIX ® application programming interface, that supports this feature and use devices that can provide ...

  • Axis Communications A1001 - page 37

    AXIS A1001 Network Door Controller & AXIS Entry Manager Alar m and Event Configuration - Network – Triggers the action rule when the network connection is lost. Select Y es to trigger the action rule when the network connection is lost. Select No to trigger the action rule when the network connection is restored. - P eer Connection – Trigg ...

  • Axis Communications A1001 - page 38

    AXIS A1001 Network Door Controller & AXIS Entry Manager Alar m and Event Configuration 1. Go to Setup > Additional Controller Conguration > Events > Recipients and click Add . 2. Enter a descriptive name. 3. Select a recipient T ype . 4. Enter the information needed for the recipient type. 5. Click Test to test the connection to th ...

  • Axis Communications A1001 - page 39

    AXIS A1001 Network Door Controller & AXIS Entry Manager Alar m and Event Configuration 2. Enter a descriptive name and the information needed for a daily , weekly , monthly or yearly schedule. 3. Click OK . To use the schedule in an action rule, select the schedule from the Schedule drop-down list in the Action Rule Setup page. Set Up Recurren ...

  • Axis Communications A1001 - page 40

    AXIS A1001 Network Door Controller & AXIS Entry Manager Reports Reports The Reports page allows you to view , print, and export reports that contain different types of information about the system. For more information about which reports that are available, see Report Types on page 40 . View , Print, and Export Reports To open the Reports page ...

  • Axis Communications A1001 - page 41

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Options System Options Security Users User access control is enabled by default and can be congured under Setup > Additional Controller Conguration > System Options > Security > Users . An administrator can set up other users by giving them user names and passwords ...

  • Axis Communications A1001 - page 42

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Options To access the Axis product via the desired protocol, enter https:// or http:// in the address eld in a browser . The HTTPS port can be changed on the System Options > Network > T CP/IP > Advanced page. IEEE 802.1X IEEE 802.1X is a standard for port-based Network ...

  • Axis Communications A1001 - page 43

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Options 1. Create a self-signed certicate as described above. 2. Go to Setup > Additional Controller Conguration > System Options > Security > Certicates . 3. Click Create certicate signing request and provide the requested information. 4. Copy the PEM-format ...

  • Axis Communications A1001 - page 44

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Options If DHCP is enabled and the product cannot be accessed, run AXIS IP Utility to search the network for connected Axis products, or reset the product to the factory default settings and then perform the installation again. For information about how to reset to factory default, ...

  • Axis Communications A1001 - page 45

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Options AXIS Video Hosting System (A VHS) AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to controller management and logs accessible from any location. For more information and help to nd a local A VHS Service Provider go to www .axis.com ...

  • Axis Communications A1001 - page 46

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Options Host Name Conguration The Axis product can be accessed using a host name instead of an IP address. The host name is usually the same as the assigned DNS name. The host name is congured under Setup > Additional Controller Conguration> System Options > Networ ...

  • Axis Communications A1001 - page 47

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Options Alternative HTTP port - Select this option to manually dene an external HTTP port. Enter a port in the range 1 024–65535. If the port eld is empty or contains the default setting, which is 0, a port number is automatically selected when enabling NA T traversal. Note ...

  • Axis Communications A1001 - page 48

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Options The following traps are available: • Cold start • Warm start • Link up • Authentication failed SNMP v3 provides encryption and secure passwords. T o use traps with SNMP v3, an SNMP v3 management application is required. To use SNMP v3, HTTPS must be enabled, see HTTP ...

  • Axis Communications A1001 - page 49

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Options Click Restore to reset most settings to the factory default values. The following settings are not affected: • the boot protocol (DHCP or static) • the static IP address • the default router • the subnet mask • the system time • the IEEE 802.1X settings Click Def ...

  • Axis Communications A1001 - page 50

    AXIS A1001 Network Door Controller & AXIS Entry Manager System Options Advanced Scripting Scripting allows experienced users to customize and use their own scripts. NO NO NO TICE TICE TICE Improper use may cause unexpected behavior and loss of contact with the Axis product. Axis strongly recommends that you do not use this function unless you u ...

  • Axis Communications A1001 - page 51

    AXIS A1001 Network Door Controller & AXIS Entry Manager Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version. The latest version may contain a correction that xes ...

  • Axis Communications A1001 - page 52

    AXIS A1001 Network Door Controller & AXIS Entry Manager Troubleshooting 3. Open a browser and type in the product’s IP address. In the page that opens, use the Browse button to select the upgrade le to use. Then click Load to restart the upgrade process. 4. After the upgrade is complete (1–1 0 minutes), the product automatically restarts ...

  • Axis Communications A1001 - page 53

    AXIS A1001 Network Door Controller & AXIS Entry Manager Troubleshooting Status and Network indicator LEDs are ashing red rapidly Hardware failure Contact your Axis reseller . 53 ...

  • Axis Communications A1001 - page 54

    AXIS A1001 Network Door Controller & AXIS Entry Manager T echnical Specifications T echnical Specifications AXIS A1 00 1 Network Door Controller Function/group Item Specications Models AXIS A1 00 1 Network Door Controller Readers Up to 2 readers per controller (Wiegand, RS485 (OSDP) with supported card formats Doors 1–2 doors per control ...

  • Axis Communications A1001 - page 55

    AXIS A1001 Network Door Controller & AXIS Entry Manager T echnical Specifications Function/group Item Specications Casing Plastic Software Conguration and basic access control management through Internet Explorer , Firefox, Chrome, or Safari Memory 256 MB RAM, 4 Gbit Flash P ower P ower in: 1 0–30 V DC, max 26 W or P ower over Ethernet ...

  • Axis Communications A1001 - page 56

    AXIS A1001 Network Door Controller & AXIS Entry Manager T echnical Specifications AXIS Entry Manager Function/group Item Specications Models AXIS A1 00 1 with built-in web-based software Readers Up to 2 readers per controller 1 (Wiegand, RS485 (OSDP) with supported card formats Controllers 1–33 Credentials Up to 400 Door controller Event ...

  • Axis Communications A1001 - page 57

    AXIS A1001 Network Door Controller & AXIS Entry Manager T echnical Specifications Function/group Item Specications Casing Plastic Software Conguration and basic access control management through Internet Explorer , Firefox, Chrome, or Safari Memory 256 MB RAM, 4 Gbit Flash P ower P ower in: 1 0–30 V DC, max 26 W or P ower over Ethernet ...

  • Axis Communications A1001 - page 58

    AXIS A1001 Network Door Controller & AXIS Entry Manager T echnical Specifications Reader Data Connector 6-pin terminal block supporting RS485 and Wiegand protocols for communication with the reader . The RS485 ports support: • Two-wire RS485 half duplex • Four-wire RS485 full duplex The Wiegand ports support: • Two-wire Wiegand Function ...

  • Axis Communications A1001 - page 59

    AXIS A1001 Network Door Controller & AXIS Entry Manager T echnical Specifications Door Connector Two 4-pin terminal blocks for door monitoring devices (digital input). All door input pins can be supervised. If the connection is interrupted, an alarm is triggered. T o use supervised inputs, install end of line resistors. Use the connection diag ...

  • Axis Communications A1001 - page 60

    AXIS A1001 Network Door Controller & AXIS Entry Manager T echnical Specifications Network Connector RJ45 Ethernet connector . Supports P ower over Ethernet (P oE). Use Category 5e cables or higher . Function Specications P ower and Ethernet P ower over Ethernet IEEE 802.3af/80 2.3at Type 1 Class 3, 44–57 V DC Max load on outputs = 7.5 W P ...

  • Axis Communications A1001 - page 61

    AXIS A1001 Network Door Controller & AXIS Entry Manager T echnical Specifications Function Pin Notes Back tampering alarm 1–2 Front tampering alarm 1–2 To bypass the front and back tampering alarm simultaneously , connect jumpers between TB 1, TB 2 and TF 1, TF 2 respectively . Bypassing the tampering alarms means that the system will not ...

  • Axis Communications A1001 - page 62

    AXIS A1001 Network Door Controller & AXIS Entry Manager T echnical Specifications Supervised Inputs i 22k Ω 4. 7 k Ω i i To use supervised inputs, install end of line resistors. This applies to all supervised inputs. For information about limitations and updates, see the product’s release notes. i Input ii 0 V DC (-) 62 ...

  • Axis Communications A1001 - page 63

    User Manual V er . M5.7 AXIS A1 00 1 Network Door Controller & AXIS Entry Manager Date: November 20 14 © Axis Communications AB, 20 13 - 20 14 P art No. 59868 ...

Fabbricante Axis Communications Categoria Network Router

I documenti che otteniamo dal fabbricante del dispositivoAxis Communications A1001 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Axis Communications
- manuali per l’uso A1001
- schede prodotto Axis Communications
- opuscoli
- o etichette energetiche Axis Communications A1001
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Axis Communications A1001.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Axis Communications A1001, manuali di manutenzione, brevi manuali o manuali utente Axis Communications A1001. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Axis Communications A1001.

Manuali per l’uso simili

Manuale completo del dispositivo Axis Communications A1001, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Axis Communications A1001 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Axis Communications A1001.

Il manuale per l’uso completo Axis Communications, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Axis Communications A1001 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Axis Communications A1001, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Axis Communications A1001 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Axis Communications A1001 - che ci dovrebbe aiutare nei primi passi durante l'uso Axis Communications A1001
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Axis Communications A1001
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Axis Communications A1001 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Axis Communications A1001?

Utilizza il modulo sottostante

Se non hai risolto il problema con Axis Communications A1001 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Axis Communications A1001 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)