Manuale per l’uso Barco R5900004/01

84 pagine 7.78 mb
Scarica

Vai alla pagina of 84

Summary
  • Barco R5900004/01 - page 1

    Cl i ckS h a r e Installation Guid e R5900004/01 28/03/2013 ...

  • Barco R5900004/01 - page 2

    Barc o nv President Kennedypark 35, 8 500 Kortrijk, Belgium Phone: +32 56.23.32.11 Fax: +32 56.26.22.62 Support: www.barco.com/esupport Visit us at the web: www.barco.com Printed in China ...

  • Barco R5900004/01 - page 3

    Changes Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied war- ranties or merchantability and fi tness for a particular purpose. Barco may m ake improvements and/or changes to the pr oduct(s) and/or the program(s) described in this publication at any time with ...

  • Barco R5900004/01 - page 4

    3. Barco shall hold you harmless and indemnify you from and against direct damages, losses and expenses arising fr om infringement or alleged infringement of any patent, trademark or copyright of such third party by the license and the right to install the Software as permitted by this S oftware Licens e and defend and settle at its sole expense an ...

  • Barco R5900004/01 - page 5

    9. This Software License is t he only understanding and agreement between you and Barco for use of the Software by you and/ o r Autho- rized Users. The Software License supersedes all other comm unications, understandings or agr eem ents we had prior t o this Software License (with the exception of any continuing con fi dentiality agreement) altho ...

  • Barco R5900004/01 - page 6

    Open So urce component Open So urce License wpa_supplicant http://opensource.org/lic enses/BSD -3-Clause imx-bootlets http: //www .gnu.org/licenses/gpl.html Crypto++ http:// www .cryptopp.com/License.t xt libresample http:// w ww .gnu.org/licenses/lgpl.html libjpeg-turbo http: //opensource.org/licenses/BSD-3-Clause acpid http://www .gnu.org/license ...

  • Barco R5900004/01 - page 7

    Open So urce component Open So urce License libgnutls26 http:// www.gnu.or g/licenses/lgpl.html libgpg-error0 http: //www .gnu.org/licenses/gpl.html http:// www.gnu.or g/licenses/lgpl. html http:// ww w .gnu.org/copyleft/fdl. html libjpeg8 BSD like licensee libnl2 http:// w ww .gnu.org/licenses/lgpl.html libnss-mdns http://www .gnu.org/licenses/gpl ...

  • Barco R5900004/01 - page 8

    Open So urce component Open So urce License rockbox-imxtools http:// www.gnu.or g/licenses/old-licenses/gpl- 2.0.html rsyslog http://www .gnu.org/licenses/gpl.html splashutils http: //www .gnu.org/licenses/gpl.html str ace http:// opensource.org/licenses/BSD -3-Clause sysfsutils ht tp://www .gnu.org/licenses/old-li censes/gpl-2.0.html sy sv in it h ...

  • Barco R5900004/01 - page 9

    EN55022/CISPR22 Class A ITE (Information T echnology Equipment) Class A ITE is a category of all other ITE which satis fi es the class A ITE limits but not the class B ITE limits. Such equipm ent should not be restricted in its sale but t he following warning shall be included in the instructions for use: War nin g : This is a class A product. In ...

  • Barco R5900004/01 - page 10

    ...

  • Barco R5900004/01 - page 11

    Tabl e of con tent s T ABLE OF CONTEN TS 1 . I n t r o d u c t i o n t o t h e I n s t a l l a t i o n G u i d e ..... ........ ...... ...... ........ ...... ........ ...... ...... ........ ...... . 3 1 . 1 A b o u t t h i s G u i d e ................... .............................. ....................... ...................... ................ ...

  • Barco R5900004/01 - page 12

    Tabl e of con tent s 2 R5900004 CLICKSHA RE 28/03/2013 ...

  • Barco R5900004/01 - page 13

    1. Introd uction t o the Instal lation Gu ide 1. INTRODUCTION TO THE INST ALLA TION GUIDE In this section you get a short introduct ion to the available ClickShare documentation. • About this Guide • About the doc umentation • Symbols and fonts 1.1 About this Guide Ve r s i o n Partnumber Description Level R5900004 Installation Guide Installa ...

  • Barco R5900004/01 - page 14

    1. Intr oduction to t he Instal lation Guide 1.3 Symbols and fonts Symbol overview The following icons are us ed in the manual : Caution Warn in g Info, term de fi nit ion. General info about the term Note: gives extr a information about t he described subject Ti p: gives extra advice about the described subjec t Font overview • Buttons are indi ...

  • Barco R5900004/01 - page 15

    2. ClickS hare Spec ificatio ns 2. CLICKSHARE SPE CIFICA TIONS About this chapter It gives an overview the speci fi cations of a ClickShare set. and of the different components in the set. Overview • About the ClickShare product • ClickShare speci fi cations • ClickShare Link speci fi cations • About the Base Unit • About the Button ? ...

  • Barco R5900004/01 - page 16

    2. ClickS hare Spec ificatio ns Regional version Accessories included European version (R9861005EU) • power cables of type C and type G • wall/ceiling mounting brackets • a DVI to VGA converter Japanese version (R9861005JP) • power cable of type A • wall/ceiling mounting brackets • a DVI to VGA converter Chinese version (R9861005CN) • ...

  • Barco R5900004/01 - page 17

    2. ClickS hare Spec ificatio ns Lifeti me MTBF = 40,000h (90% con fi de nce level) MTBF = 1 00,000h (60% con fi denc e level) MTBF conditions: • Environment: Ground B enign • T emperature: 25°C • Method: MIL-HDBK-217F Notice 2 System requirements PC minimum req uirements: C P U :I n t e lP e n t i u mD u a lC o r eE 2 1 4 0–2* 1600 M hz ...

  • Barco R5900004/01 - page 18

    2. ClickS hare Spec ificatio ns Connection with Base Unit USB Vide o Input Single link DVI Video O utput USB mini type B Powe r Using external power adaptor (included in the package): • DC output: 5V , 2A • AC input: 100-240V , 50-60 Hz, 0.36A • Wal l-plug type • Included AC clips: types A , C, G and I for world wide cov erage Po wer consu ...

  • Barco R5900004/01 - page 19

    2. ClickS hare Spec ificatio ns Ta b l e 2 - 3 USB port The USB port is used to update the software of both the Base Unit and the Buttons. When plugging in the Button into the Base Unit, the Button is paired t o the Base Unit. The B ase Unit checks whether the Button’ s software and fi rmware are up to date. If not, the Base Unit updates the sof ...

  • Barco R5900004/01 - page 20

    2. ClickS hare Spec ificatio ns 1 2 3 4 5 6 7 8 9 10 1 Image 2-4 Backside of the B ase Unit 1 Fixture points for the antenna 2 Label containi ng the article number and power rating of the product 3 Mains power connector 4R o c k e r s w i t c h 5 DVI-I display connector 6 DisplayPort connector 7 LAN Ethernet c onnection 8 4 USB ports 9 Audio In por ...

  • Barco R5900004/01 - page 21

    2. ClickS hare Spec ificatio ns Image 2-5 V entilati on grids IN and OUT The Base unit sucks air via the top ventilation grid and push hot air out on both sides. Make sure not to cover the ventilat ion grids during operation of the Base Unit. Always keep a free area of minimum 50 mm in front of all vent ilat ion grids. Bottom layout of the Base Uni ...

  • Barco R5900004/01 - page 22

    2. ClickS hare Spec ificatio ns 1 USB connector 2B u t t o n 3L E D r i n g Ta b l e 2 - 6 USB connector Through the USB connector the Button can be plugged in in a laptop (for sharing your screen) or in the Base Unit (for pairing the Button to t he Base Unit or updati ng its software). Button Click the Button to di splay the content of the laptop? ...

  • Barco R5900004/01 - page 23

    2. ClickS hare Spec ificatio ns Image 2-7 T ray layout Article number The speci fi c article number of the tray can be found at the bottom of it . Do not cl ean the T ray wit h products con tainin g alcohol . T ray is passive, requires no power or b atteries. 2.7 ClickShare App Introduction The ClickShare App is freely available from the A pple st ...

  • Barco R5900004/01 - page 24

    2. ClickS hare Spec ificatio ns Image 2-10 Image 2-1 1 Image 2-12 Image 2-13 Image 2-14 14 R5900004 CLICKSHA RE 28/03/2013 ...

  • Barco R5900004/01 - page 25

    3. Getti ng started 3. GETTING ST ARTED Overview • Environmental Condition Check •B a s i c W o r k fl ow 3.1 Environme ntal Condition Check Environment condition check A device must always be mounted in a manner which ensures both air inlet s and outlets are free. F or instal lations in environments where the device i s subject to excessive d ...

  • Barco R5900004/01 - page 26

    3. Get ting sta rted 16 R5900004 CLICKSHA RE 28/03/2013 ...

  • Barco R5900004/01 - page 27

    4. ClickSh are inst allation 4. CLICKSHARE INST ALLA TION About this chapter The installation c hap ter gi ves an overview of the different way s to install the base unit of ClickShare, the possible connections and the use of ClickShare Link for an iPad co nnection. Overview • Installati o n methods for the Base uni t • T able mo unting • W a ...

  • Barco R5900004/01 - page 28

    4. ClickSha re install ation Using extension cables for the antennas i s allowed, but this can reduce the p erformance. 4.2 T able mounting Overview Put the Base Unit directly on the meeting room table. The total weight of the Base Unit is 2,6 k g. C AUTION : When placing the Bas e Unit inside a closed cabinet, make sure there is su f fi cient ven ...

  • Barco R5900004/01 - page 29

    4. ClickSh are inst allation 173mm Image 4-1 4. T o mount the Base unit to the wall, h ook the slots in the brackets over the 2 screws in the wall (front side of the Base unit directed toward s the ceiling or the fl oor) and pull it downward until it is secured. C AUTION : It i s only all owed to mount t he Base Unit f ront side up or down. Mounti ...

  • Barco R5900004/01 - page 30

    4. ClickSha re install ation Necessary p arts • Mounting brackets (included in the ClickShare box) • 4 mounting screws and corresponding screwdriv er (not included) How to install 1. D ril l four holes in the ceiling according to the dimensions indicated in the picture below (l ength: 277mm, depth: .157mm) 277mm 157mm Image 4-2 Ceiling m ount 2 ...

  • Barco R5900004/01 - page 31

    4. ClickSh are inst allation Image 4-3 Removal of pre-mount ed screws 3. Install the mounting brackets to the Bas e Unit as shown on image 4- 2. Drive in the four removed Pan Head T 10 M3 screws to secure t he brackets to the Ba se Unit. 4. Insert a plug in each hole (if needed and depending on the ceiling type) and drive in the 4 moun ting screws. ...

  • Barco R5900004/01 - page 32

    4. ClickSha re install ation Image 4-4 Removal of pre-mount ed screws 2. Place the Base Unit on the rack mount and drive in the four removed Pan Head T10 M3 screws. Refer to “1” on image 4-5. 3. Fasten the antenna to the front panel of the rack mount. Refer to “2” on image 4-5. 1 2 3 3 2 1 Image 4-5 4. Tighten the antenna cables to t he bac ...

  • Barco R5900004/01 - page 33

    4. ClickSh are inst allation 4.6 Vide o signal connections to the Base Unit C AUTION : Make sure the Base Unit is installed properly before connecting. About Video signal connection Depending on the local setup, a single screen or dua l screen set up is possible. For a single screen setup, a DVI or DisplayPort connection should be make between the ...

  • Barco R5900004/01 - page 34

    4. ClickSha re install ation DVI DisplayP or t DVI DisplayP or t Image 4-7 Display co nnections When the second display has no display port input, use an adapter from display port to DVI to connect the display . An active adapter is allowed. Us e an USB port at the back side of the Base Unit to power the adapter . 4.7 Audio connection About audio T ...

  • Barco R5900004/01 - page 35

    4. ClickSh are inst allation Sound is not sent out In some Windows environments sound is not sent out. This can be so lved as follow: 1. Right click on the sound icon in the sys tem tray and select Playback devices .T h e Sou nd window opens. 2. Select Speakers C lickShare, select Set default and c lick Apply . 4.8 LAN connection About LAN connecti ...

  • Barco R5900004/01 - page 36

    4. ClickSha re install ation Image 4-10 Power connect ion European version T ype C an d type G Japanese version T ype A Chinese version T yp e I CCC North Am erican ve rsion T ype A 2. T o power on the unit, set the roc ker switch to “1”. If the Base unit does not start up automatically , use the standby button. The standby button at the front ...

  • Barco R5900004/01 - page 37

    4. ClickSh are inst allation 4.10 Connectin g an iPad The optional Hardware add-on ClickShare Link is needed to connect an iPad. About an iPad connection The ClickShare Link allows users to get the content from an iPad touchscreen to the large meeti n g room screen. The iPad behaves like an additi onal laptop. Note that the ClickShare Link only st ...

  • Barco R5900004/01 - page 38

    4. ClickSha re install ation The content of t he touchscreen will be displayed on the meeting r oom screen. Connection via Apple TV 1. Connect an USB cable between the ClickShare Link USB port and one of the backside USB ports of the Base Unit. USB USB DVI HDMI Apple T V iPad ClickShare Link ClickShare Base Unit Image 4-17 Wirele ss iPad connecti o ...

  • Barco R5900004/01 - page 39

    4. ClickSh are inst allation - Go into the Apple TV m ain menu and connect to the ClickShare Base Un it WiFi (I P addres s = 192.168.2.1, password : click- share) Image 4-22 - Continue without internet. Image 4-23 - G ot ot h e Set ting s p age, select General , Sleep after and set to Never ; Image 4-24 Image 4-25 - G ot ot h e Settings page, selec ...

  • Barco R5900004/01 - page 40

    4. ClickSha re install ation - Return to the Ho me page of t he Apple TV . Image 4-27 - Calibrate the ClickShare Link t o Apple TV menu by going into the ClickShare Link Base Unit web interface. This prevents the Apple TV menu from being shown in the ClickShare com positi on. For more info about the calibrati on procedure, see "Calibrating a C ...

  • Barco R5900004/01 - page 41

    5. Prepari ng the butto ns 5. PREP ARING THE BUTT ONS Overview • Pairing • Pre-install of the Launcher service 5.1 Pairi ng Pairing of the Buttons to the Ba se Unit T o be able to use a Button it should be as signed to the Base Unit you are using. T his process is cal led pairing. By default, the f our Buttons delivered in the ClickShare set ar ...

  • Barco R5900004/01 - page 42

    5. Prepa ring the buttons Both the LEDs of the Button and the LEDs of the Base Unit are blinking white. T his means pairing is in progress. The Base Unit automaticall y checks whether the s oftwar e of the Button i s up to date. I f not, the Base Unit updat es the Button software. This may take m ore time. During the pairing and update process, a m ...

  • Barco R5900004/01 - page 43

    5. Prepari ng the butto ns Image 5-5 Launche r service locat ion for Windows Image 5-6 Launche r service for MAC R5900004 CLICKSH ARE 28/03/2013 33 ...

  • Barco R5900004/01 - page 44

    5. Prepa ring the buttons 34 R5900004 CLICKSHA RE 28/03/2013 ...

  • Barco R5900004/01 - page 45

    6. Web I nter face 6. WEB I NTERF ACE Overview • Accessing the ClickShare Web Interface • Language setup W eb interface • About C lickShare tabs • Basic setting • W a llpaper (background) selection • Personalized wallpapers • Display settings • On-screen text format • Audio settings • Advanced settings: H ostname • Advanced se ...

  • Barco R5900004/01 - page 46

    6. Web In terface By default, the password is set to ’admin’. The web interface opens. Image 6-1 Web interf ace, startup screen The language of the web interface can be changed. It contains also three tabs: Set up , Maint enance and Help . If you cannot fi nd the IP address (e.g. t here is no screen avail able) you should connect to the Base U ...

  • Barco R5900004/01 - page 47

    6. Web I nter face The following languages are possibl e : • Arabic • Chinese • Danish •D u t c h •E n g l i s h •F i n n i s h • French •G e r m a n • Italian • Japanese • Korean • Norwegian • Portuguese • Russian • Spanish • Swedish How to change 1. Click on the drop down box ne xt Choose language and select the de ...

  • Barco R5900004/01 - page 48

    6. Web In terface Image 6-3 T ab pages 1 Main tab bar 2S u b t a b b a r 3 Information and fi ll out pane 6.4 Basic set ting About Basic settings The basic settings contain the following infor m ation: • Meeting room name • Meeting room location • Welcome message T o chang e the basic settin gs 1. Login to the ClickShare web interface. 2. C ...

  • Barco R5900004/01 - page 49

    6. Web I nter face Image 6-4 Setup, basic se ttings The Basic tab is displayed by default. 3. In the Ide nti fi cation section click in an input fi eld and enter - the name of the meeting room - the location of the meeting room - a welcome message wh ich wil l be displayed below the meeting room name and location. Note: The name of the meeting ro ...

  • Barco R5900004/01 - page 50

    6. Web In terface Image 6-5 A message is displayed to identify that the changes are successful. The new name, location and welcome message are displayed in the lef t top corner of the s creen. 6.5 W al lpape r (bac kgrou nd) sel ectio n About wallpaper When ClickShare starts up, a background i(wallpaper) is displayed. By default a general ClickShar ...

  • Barco R5900004/01 - page 51

    6. Web I nter face Image 6-6 Wal lpaper select ion 3. Select one of the available wallpapers (3) and click Appl y (5).. Note: By default a general Barco ClickShare wallpaper and a Cli ck Share Quick Start Guide wallpapers are avaulable. They are autom atically resized to fi t the aspect ratio of the screen. The selected wallpaper is indic ated wit ...

  • Barco R5900004/01 - page 52

    6. Web In terface 6.6 Personalized wal lpapers About a personalized wallpaper Via t he web interface it is pos sible to upload personalized backgrounds or wallpaper s. The free space to upload wallpapers i s i n d i c a t e di nt h e Available s torage pane. The upload fi le s houl d be a JPEG, PN G, BMP , GIF o r TIF F for mat wi th a ma xim um s ...

  • Barco R5900004/01 - page 53

    6. Web I nter face The content of the fi le is checked and when valid (format and size), the fi le is uploaded (6). The message Successfully applied changes is displayed on top of the page. 5. Follow now the wall paper selection procedure to activate the personalized wallpaper . Remove personalized wallpape r 1. While the wallpaper tab is open, h ...

  • Barco R5900004/01 - page 54

    6. Web In terface 5. Resolution setup. Click on the drop-down list and select the desired resolut ion or select Custom and enter a resolution manually . Note: By default, the c orrect resolution is automatically set t hrough the EDID (Ex tended Display Identi fi ca tion D ata). Note: The maximum output resolution supported by ClickShare is 1920 x ...

  • Barco R5900004/01 - page 55

    6. Web I nter face Image 6-1 1 On-screen text 3. Whe n changes are m ade, click Apply to activ ate the new settings. T o revert the changes, click Refresh Page . Language selection 1. Select the language of the on-screen text and quick st art wallpaper . Click on the drop down box next to Language and sel ect the desired language. Image 6-12 Langua ...

  • Barco R5900004/01 - page 56

    6. Web In terface Te x t c o l o r 1. Click in the input fi eld next to T ext color or click on the color i con (1). Image 6-13 T ext color s election A color selection window opens. 2. Drag the ma rker in the color bar up or down until the desired color is obt ained (2). 3. T o change the tint of the selected color , drag the circler marker in th ...

  • Barco R5900004/01 - page 57

    6. Web I nter face Image 6-15 T ransparency - Slider to the r ight: more transparency - Slider to the left : less t ransparency 6.9 Audio settings About the audio settings The audio functionality can be disabled or enabled. W hen the enable and/ or disable setting is changed, the Buttons must be re-paired before the setti ng becom es active. Image ...

  • Barco R5900004/01 - page 58

    6. Web In terface 6.10 Advanced se ttings: Hostname Hostname Hostnames are human-readable nicknames that correspond to t he address of a device connected t o a network. How to change 1. Login to the ClickShare web interface. 2. C lick the Set up tab (1) and click Advanced (2). Image 6-17 Hostname 3. Click in the input fi el d next to Hostnam e (3) ...

  • Barco R5900004/01 - page 59

    6. Web I nter face Image 6-18 DHCP setup The Advanced tab is displayed. 3. Check the radio button nex t to DHCP Assigned (3). 4. Fill out the DHCP Client ID 5. C lick Appl y to c on fi rm the changes. Fixed IP a ddress setu p 1. Login to the ClickShare web interface. 2. C lick the Set up tab (1) and click Advanced (2). Image 6-19 Fixed IP addr ess ...

  • Barco R5900004/01 - page 60

    6. Web In terface 6.12 Advan ced se tting s: WiFi set tings W ARNING : It i s not al lowed to oper ate the Base Unit out side it s intende d geographi cal region. About WiFi A connection wi th the Base Unit can be made via a wireless connection. A fi xed wireless IP address is used to establish the con- nection. How to setup 1. Login to the ClickS ...

  • Barco R5900004/01 - page 61

    6. Web I nter face • the LAN interface settings, • the WiFi settings, • System identi fi cat ion • Historical updates • Subsystem status •S e n s o r s • System management T o che ck the statu ses 1. Login to the ClickShare web interface. 2. C lick the Maintenance tab and click St atus . The Sta tus tab page is displayed. Image 6-21 ...

  • Barco R5900004/01 - page 62

    6. Web In terface Image 6-22 Detail assoc iated devices System Ma nagement Use the Restart System button to restart ClickShare. Use the Shut down System butt on to shutdown ClickShare. Image 6-23 System manageme nt 6.14 Maintenance , But tons information About buttons The Butt ons tab gives information on the Butt on s that hav e b een paired to th ...

  • Barco R5900004/01 - page 63

    6. Web I nter face Image 6-24 Paired but tons, overview The list gives an overview of the Buttons that have in the past been paired to this Base Unit. If a Button has in the meantime been paired to another Ba se Unit, it will st ill appear in this list. T o remove it from the list, at the right of the tab page, click More and select Remove from lis ...

  • Barco R5900004/01 - page 64

    6. Web In terface 6.15 Con fi gured Link s About Con fi gured Links The ClickShare Links connected to the Base Unit are indicated in on the Links tab. F rom this locati on the Links can be calibrated or they can be removed from the l ist. How to display the Links 1. Login to the ClickShare web interface. 2. C lick the Maintenance tab (1) and then ...

  • Barco R5900004/01 - page 65

    6. Web I nter face iPad user from the screen. If one of those areas are not detected in the image s received from the framegrabber the Base Unit assumes the iPad user i s sharing and his content will be displayed on screen. Preceding the calibration procedure the AppleTV should be c onnected to the ClickShare Link and should be placed on a screen w ...

  • Barco R5900004/01 - page 66

    6. Web In terface Image 6-28 ClickShare p roduct page Image 6-29 Download p age How to update 1. Download the latest version of the s oftware from Barco’s website. 2. Login to the ClickShare web interface. 3. C lick the Maintenance tab (1) and then cli ck Soft ware (2). Image 6-30 Update software The content of the Softwar e tab is displayed. The ...

  • Barco R5900004/01 - page 67

    6. Web I nter face 5. Browse to the new software version and click Open to start the upload. Note: This should be an ipk fi le. Y ou might have to unzip the fi le downloaded f rom Barco’s website. Note: Updating the s o ftware to t he Base Unit and installing it can take several minutes. Progress can be followed on the meeting room display . Th ...

  • Barco R5900004/01 - page 68

    6. Web In terface A portable backup contains: • W a llpapers • W a llpapers settings • Logging settings • Link name • Link setting auto show/hide • All display settings • OSD language • Location • Welcome message • Audio functionality enabled/disabled • WiFi channel • WiFi frequency T o ma nage the system con fi gur ation 1 ...

  • Barco R5900004/01 - page 69

    6. Web I nter face 6.20 Load Defa ult Setti ngs About default settings The ClickShare Base Unit can return to t he factory default sett ings. The following settings are the d efaults: • Meeting room identi fi c ation info is cleared. • Language is set to English. • Custom wallpapers are removed and the default wallpaper is restored. • Disp ...

  • Barco R5900004/01 - page 70

    6. Web In terface Image 6-34 Alter native way 3. Select Load Default Settings with the arrow keys in the boot menu and press En ter . 6.21 Administrat or password About the administrator password The administrator password to login in the web interf ace can be changed at any time. T o change the administrator password 1. Login to the ClickShare web ...

  • Barco R5900004/01 - page 71

    6. Web I nter face 2. C lick the Maintenance tab (1) and then cli ck Logging (2).. The content of the Logging tab is di splayed. Image 6-36 Logging 3. T o create a debug logging, check the ch eck box next to Debug Logging (3 ). 4. T o download the current log fi le, click on Downloa d Log (4 ). A File download window opens. Click Save to open a br ...

  • Barco R5900004/01 - page 72

    6. Web In terface Image 6-38 The content of the C ontact tab is displayed. The Contac t p age contains a link t o the ClickShare hom e page on Barco’s website (3). 3. C lick on the link V isit thi s ClickShare p roduct page . Image 6-39 4. C lick Do wnl oad s Image 6-40 All kind of manuals, brochures and software updates can be found on that page ...

  • Barco R5900004/01 - page 73

    6. Web I nter face The End-User license agreement is d isplayed. Image 6-41 EULA 3. If desired, click Save ... (3) to save a copy of the agreement on y our laptop. 4. In the Fil e Download window , click Save . The Save as window opens. 5. Browse to the location where t o store the EULA fi le and click Save . A copy of the B arco ClickShare EULA h ...

  • Barco R5900004/01 - page 74

    6. Web In terface 64 R5900004 CLICKSHA RE 28/03/2013 ...

  • Barco R5900004/01 - page 75

    7. Softw are upda tes 7. SOFTW ARE UPDA TES 7.1 Software update About Software update s There are t wo ways to update the Base Unit software: • via the Web Interfac e, for more information, see "Base Unit software update", page 55 • by copying the soft ware on a USB stick T o update the Base Unit software by copying the soft ware on a ...

  • Barco R5900004/01 - page 76

    7. Softwa re updates 66 R5900004 CLICKSHA RE 28/03/2013 ...

  • Barco R5900004/01 - page 77

    8. Tr oublesh ooting 8. TROUBLESHOOTING 8.1 T roubleshooting list Problem solving Locate the problem you are experiencing i n the table below and apply the solution. Probl em Cause Soluti on Quality of the i mage on the meeting room display is not satisfactory The quality or length of the cable between the Base Unit and the d isplay or the connecti ...

  • Barco R5900004/01 - page 78

    8. Troub leshooti ng Probl em Cause Soluti on Video is not shown on screen Player uses overlays Disable the usage of overlays in the preferences of t he video player . The content uses HDCP ClickShare does not support showing HDCP content (it will be displayed as black) Some programs of W indows are not shown on the display Use of overlays, 3D or h ...

  • Barco R5900004/01 - page 79

    8. Tr oublesh ooting Probl em Cause Soluti on In Windows XP , I cannot see the ClickShare drive in the window “My Computer”. This problem might be caused by a known issue of W indows XP Yo u c a n fi nd mo re details and the appropriate solution via link : h ttp: //sup por t.mi cro soft. com /kb/2 976 94 ClickShare does not work on m y Mac Cli ...

  • Barco R5900004/01 - page 80

    8. Troub leshooti ng 70 R5900004 CLICKSHA RE 28/03/2013 ...

  • Barco R5900004/01 - page 81

    9. Environ mental infor mation 9. ENVIRONMENT AL INFORMA TION 9.1 Disposal informati on Disposal Information W aste Electrical and Electronic Equipment This symbol on the product indicates that, un der the European Directive 2002/96/EC governing waste from electrical and electronic equipment, this pr oduct must not be di sposed of with other munici ...

  • Barco R5900004/01 - page 82

    9. Envir onmental i nformati on 底架 Cha ssis x 0 x 000 电 源供 应 器 Power Supply U nit x 0 x 000 文件 说 明 书 Paper Manuals 000000 O: 表示 该 有毒有害物 质 在 该 部件所有均 质 材料中的含量均 在 SJ/T 1 1363-2006 标 准 规 定的限量 要求以下 . O: Indicates that t his toxic or hazardous substance contai ...

  • Barco R5900004/01 - page 83

    Index INDEX A About 3, 5, 8, 1 1–12 Base U nit 8 But ton 1 1 ClickShare 3 Documentation 3 ClickShare product 5 Guide 3 T ray 12 Address 72 B Barco contact d ata 61 Base unit 17–19, 21 Installation 17–19, 21 Ceiling mounting 19 Met hods 1 7 Rack mounting 21 T able m ounting 18 Wall mounting 18 Base Unit 8, 23–25, 27 About 8 Audio 24 Connecti ...

  • Barco R5900004/01 - page 84

    Index Update 65 Software updates 65 Speci fi cations 5–7 ClickShare 6 ClickShare Link 7 Symbols 4 T T able mounting 18 Base unit 18 T ray 12 About 12 T roubleshooting 67 T roubleshooting list 67 U Update 65 Sof twar e 65 W Wal l mounting 18 Base unit 18 Web interface 36–38, 40, 42–44, 47–48, 50, 52, 54– 55, 57, 59–62 Audio settings 47 ...

Fabbricante Barco Categoria Frozen Dessert Maker

I documenti che otteniamo dal fabbricante del dispositivoBarco R5900004/01 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Barco
- manuali per l’uso R5900004/01
- schede prodotto Barco
- opuscoli
- o etichette energetiche Barco R5900004/01
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Barco R5900004/01.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Barco R5900004/01, manuali di manutenzione, brevi manuali o manuali utente Barco R5900004/01. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Barco R5900004/01.

Manuali per l’uso simili

Manuale completo del dispositivo Barco R5900004/01, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Barco R5900004/01 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Barco R5900004/01.

Il manuale per l’uso completo Barco, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Barco R5900004/01 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Barco R5900004/01, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Barco R5900004/01 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Barco R5900004/01 - che ci dovrebbe aiutare nei primi passi durante l'uso Barco R5900004/01
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Barco R5900004/01
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Barco R5900004/01 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Barco R5900004/01?

Utilizza il modulo sottostante

Se non hai risolto il problema con Barco R5900004/01 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Barco R5900004/01 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)