Manuale per l’uso Boss Audio Systems GS-10

180 pagine 7.61 mb
Scarica

Vai alla pagina of 180

Summary
  • Boss Audio Systems GS-10 - page 1

    Owner’s Manual 03342912 ‘03-8-1N Thank you, and congratulations on your choice of the BOSS GS-10 Guitar Effects System with USB Audio Interface. Before using this unit, carefully read the sections entitled: • USING THE UNIT SAFELY (page 2–3) • IMPORTANT NOTES (page 4–5) These sections provide important information concerning the proper ...

  • Boss Audio Systems GS-10 - page 2

    This product complies with the requirements of European Directive 89/336/EEC. For EU Countries For EU Countries Apparatus containing Lithium batteries ADVARSEL! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. VARNING Explo ...

  • Boss Audio Systems GS-10 - page 3

    3 013 • In households with small children, an adult should provide supervision until the child is capable of following all the rules essential for the safe operation of the unit. .......................................................................................................... 014 • Protect the unit from strong impact. (Do not drop it!) ...

  • Boss Audio Systems GS-10 - page 4

    4 IMPORTANT NOTES 291a In addition to the items listed under “USING THE UNIT SAFELY” on page 2–3, please read and observe the following: Power Supply 301 • Do not use this unit on the same power circuit with any device that will generate line noise (such as an electric motor or variable lighting system). 302 • The AC adaptor will begin to ...

  • Boss Audio Systems GS-10 - page 5

    5 IMPORTANT NOTES 559a • When you need to transport the unit, package it in the box (including padding) that it came in, if possible. Otherwise, you will need to use equivalent packaging materials. 561 • Use only the specified expression pedal (EV-5; sold separately). By connecting any other expression pedals, you risk causing malfunction and/o ...

  • Boss Audio Systems GS-10 - page 6

    6 Contents USING THE UNIT SAFELY ................... 2 IMPORTANT NOTES .......................... 4 Main Features .................................. 9 Panel Descriptions .......................... 10 Front Panel ....................................................................... 10 Rear Panel .................................................... ...

  • Boss Audio Systems GS-10 - page 7

    7 Contents VB (Vibrato) ................................................................ 46 UV (Uni-V) ................................................................. 47 RT (Rotary) ................................................................. 47 SDD (Short Delay) ..................................................... 48 HU (Humanizer) ....... ...

  • Boss Audio Systems GS-10 - page 8

    8 Contents Chapter 9 Using the GS-10 Connected to a Computer Via USB ....... 78 Before Connecting with USB ....................................... 78 Driver Mode ............................................................... 78 Setting USB-Related Functions ................................... 78 Adjusting the Recording Level (Output Level) ....... ...

  • Boss Audio Systems GS-10 - page 9

    9 Main Features True “Tabletop Guitar Effects System” This is an all-new guitar effects system, which gives you not only the kind of professional-quality effects available only from BOSS, but features a USB interface and built-in monitor speakers as well. Internal Effects Derived from the GT-6/GT-6B, Made More Powerful All components of the GT- ...

  • Boss Audio Systems GS-10 - page 10

    10 Panel Descriptions Front Panel fig.00-041 1. Display A variety of information about the GS-10 appears here. Normally, patch names are displayed. 2. PREAMP/SPEAKER (p. 21, p. 28) (Preamp/Speaker Simulator) GAIN Knob Adjusts the degree of preamp distortion. BASS Knob Adjusts the sound quality of the preamp’s low- frequency range. MIDDLE Knob Adj ...

  • Boss Audio Systems GS-10 - page 11

    11 Panel Descriptions TAP Button Use this when setting the delay time with the tap input. (p. 33) 6. CHORUS (p. 21, p. 34) LEVEL Knob Adjusts the volume level of the chorus sound. CHORUS On/Off Button Press to change the settings. 7. REVERB (p. 21, p. 34) LEVEL Knob Adjusts the volume level of the reverb sound. REVERB On/Off Button Press to change ...

  • Boss Audio Systems GS-10 - page 12

    12 Panel Descriptions Rear Panel fig.00-042 1. MIC INPUT Jack/Connector Input jack/connector for use with mics. Both standard TRS type and XLR type are provided. * Use only one of these jacks at a time. * Not compatible with phantom power. 2. AUX INPUT Jacks L/R Used for connecting a CD player or similar audio device, rhythm machine, sound module, ...

  • Boss Audio Systems GS-10 - page 13

    13 Panel Descriptions Signal Flow fig.00-043 MIDI OUT MIDI IN CONTROL OUT CONTROL IN GS-10 OUT GS-10 IN CONTROL MUL TI EFFECTS A/D D/A USB INPUT SELECT MIDI SELECT Computer EXP/CTL 1, 2 GUIT AR/ BASS MIC INPUT AUX INPUT Foot Switch Expression Pedal Guitar/Bass Mic CD/MD Sound Module Sequencer Mixer etc. Speaker MIDI OUT MIDI IN PHONES OUTPUT GUIT A ...

  • Boss Audio Systems GS-10 - page 14

    14 Chapter 1 Playing Sounds Making the Connections fig.01-010 * To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. * Turn up guitar amp and audio amp volume levels and the GS- 10’s OUTPUT LEVEL only after turning on the power to all c ...

  • Boss Audio Systems GS-10 - page 15

    15 Chapter 1 Playing Sounds Section 1 ● When using the unit with an expression pedal connected to the EXP PEDAL/CTL 1,2 jack, set Minimum Volume to the “MIN” position. ● Use only the specified expression pedal (Roland EV-5; optional). By connecting any other expression pedals, you risk causing malfunction and/or damage to the unit. ● When ...

  • Boss Audio Systems GS-10 - page 16

    16 Chapter 1 Playing Sounds Setting Output Device (Amps) (OUTPUT SELECT) Select the type of output device connected to the OUTPUT jack or GUITAR AMP OUT jack. fig.01-061 1. Press [SYSTEM], causing the indicator to light. The Output Select settings screen appears. fig.01-070d 2. Turn the PATCH/VALUE dial to select the type of device connected to the ...

  • Boss Audio Systems GS-10 - page 17

    17 Chapter 1 Playing Sounds Section 1 Connecting Audio Devices to the AUX INPUT Jack When using a CD or MD player, rhythm machine, or similar device for practice, connect these device to the AUX INPUT jack on the rear panel. fig.01-080 Use the AUX INPUT knob on the front panel to adjust the input volume level for AUX INPUT. * Setting the input leve ...

  • Boss Audio Systems GS-10 - page 18

    18 Chapter 2 Creating Your Own Favorite Tones (Patches) What is a Patch? The GS-10 can store 200 combinations (or “sets”) of effects and parameter settings. Each of these sets is called a “patch.” Patches include both User patches and Preset patches. fig.02-010 User Patches (U001–U100) Newly created effects settings are saved in the User ...

  • Boss Audio Systems GS-10 - page 19

    19 Chapter 2 Creating Your Own Favorite Tones (Patches) Section 2 Selecting the Input (INPUT SELECT) This selects the input signal to which the effects are added. This is also used for setting the type of device connected to the input connector. fig.02-051 1. Press [INPUT SELECT]. The Input Select settings screen appears. fig.02-060d 2. Turn the PA ...

  • Boss Audio Systems GS-10 - page 20

    20 Chapter 2 Creating Your Own Favorite Tones (Patches) USB (Bass): You can add effects to the signals input from the USB connector (for sounds in the bass and similar registers). Signals from GUITAR/BASS INPUT and MIC INPUT are disregarded, and the signals input to the GS-10 from the AUX INPUT connector are mixed with the effect output. fig.02-110 ...

  • Boss Audio Systems GS-10 - page 21

    21 Chapter 2 Creating Your Own Favorite Tones (Patches) Section 2 Adjusting the Tones with the Knobs The GS-10 panel features 13 knobs for adjusting effect tones. You can use these knobs to make slight adjustments to tones in the selected patch quickly and easily. fig.02-150 PREAMP GAIN: Adjusts the degree of preamp distortion. The distortion gets ...

  • Boss Audio Systems GS-10 - page 22

    22 Chapter 2 Creating Your Own Favorite Tones (Patches) Turning the Effect On and Off The GS-10’s internal effects are switched on and off with button controls. The indicator for an effect’s ON/OFF button lights up when the effect is enabled. fig.02-160 1. Press the ON/OFF button for the effect you want to be able to switch on and off. The sett ...

  • Boss Audio Systems GS-10 - page 23

    23 Chapter 2 Creating Your Own Favorite Tones (Patches) Section 2 3. Rotate the VALUE dial to select the Quick Setting you want. The tone switches to that of the selected sample settings. * You can select “—: User Setting” to return the settings to their condition prior to selecting the Quick Settings. 4. To select Quick Settings for another ...

  • Boss Audio Systems GS-10 - page 24

    24 Chapter 2 Creating Your Own Favorite Tones (Patches) Naming Patches Each patch can be given a name (Patch Name) consisting of up to sixteen characters. You’ll probably want to take advantage of this feature by assigning names that suggest the sound you’ll obtain, or the song in which it’ll be used. fig.02-220 1. Press [NAME/NS/MASTER] so t ...

  • Boss Audio Systems GS-10 - page 25

    25 Section 3 Chapter 3 Saving the Tones You Have Created Storing Patches (PATCH WRITE) When you want to keep a tone created with the Quick Settings or a tone with altered parameter values, use the “Write procedure” to save it to a User patch. * If the power is turned off, or if the tone is switched (Patch Change; p. 18) before you’ve carried ...

  • Boss Audio Systems GS-10 - page 26

    26 Chapter 3 Saving the Tones You Have Created Exchanging Patches On the GS-10, you can “swap” or exchange the positions of two User patches. The following explains how this is done. fig.03-050 1. Select the exchange source patch. * Refer to “Patch Change” (p. 18). 2. Press [WRITE]. 3. Press PARAMETER [ ]. The screen for specifying the exch ...

  • Boss Audio Systems GS-10 - page 27

    27 Chapter 3 Saving the Tones You Have Created Section 3 Registering Your Favorite Patches (DIRECT PATCH) You can register preferred patches to DIRECT PATCH [1]–[4] and then press these buttons to call up the corresponding patches directly. fig.03-070 1. Press [SYSTEM] a number of times until “DIRECT PATCH” is displayed. fig.03-080d 2. Press ...

  • Boss Audio Systems GS-10 - page 28

    28 Chapter 4 Introduction to Effects and Parameters In this chapter you will find detailed descriptions for each of the GS-10’s onboard effects, and the parameters used to control them. The sound being input to each effect is called the “direct sound,” and the sound modified by the effect is called the “effect sound.” * Setting values for ...

  • Boss Audio Systems GS-10 - page 29

    29 Chapter 4 Introduction to Effects and Parameters Section 4 Type This sets the type of the guitar preamp. * When the type is set to CONCERT 810, SESSION, BASS 360, T.E., B-MAN, FLIP TOP, Bass Clean, Bass Crunch, Bass HiGain, or Mic Preamp set OUTPUT SELECT (p. 16) as shown below to match the GS-10 to the type of amp to be connected. When connecti ...

  • Boss Audio Systems GS-10 - page 30

    30 Chapter 4 Introduction to Effects and Parameters When CUSTOM 1–3 is selected for Type You can set the following parameters when Type is set to CUSTOM. “Customizing the COSM Amps” (p. 55) EDIT CUSTOM PRE 1–3 Parameter Value Type JC Clean, TW Clean, Crunch, VO Lead, BG Lead, MS1959 Stk, Modern Stk Bottom -50–+50 Edge -50–+50 Bass Freq ...

  • Boss Audio Systems GS-10 - page 31

    31 Chapter 4 Introduction to Effects and Parameters Section 4 EDIT CUSTOM SP 1 –2 Parameter Value Speaker Size 5”–15” Color Low -10–+10 Color High -10–+10 Speaker Num x1, x2, x4, x8 Cabinet Open, Close Mic Type This setting selects the simulated mic type. Mic Dis. (Mic Distance) Simulates the distance between the mic and speaker. Off Mi ...

  • Boss Audio Systems GS-10 - page 32

    32 Chapter 4 Introduction to Effects and Parameters OD/DS (Overdrive/Distortion) This effect distorts the sound to create long sustain. It provides 22 types of distortion and three different custom settings. Parameter Value On/Off Off, On Type refer to below Drive 0–100 Bass -50–+50 Treble -50–+50 Effect Level 0–100 Direct Level 0–100 On/ ...

  • Boss Audio Systems GS-10 - page 33

    33 Chapter 4 Introduction to Effects and Parameters Section 4 DELAY This effect adds delayed sound to the direct sound, giving more body to the sound or creating special effects. Parameter Value On/Off Off, On Type Single, Pan, Stereo DlyTime 0 ms–1800 ms, BPM –BPM Delay Time.F 0 msec–20 msec Tap Time 0%–100% (Type = Pan) Feedback 0–100 H ...

  • Boss Audio Systems GS-10 - page 34

    34 Chapter 4 Introduction to Effects and Parameters CHORUS In this effect, a slightly detuned sound is added to the original sound to add depth and breadth. Parameter Value On/Off Off, On Mode Mono, Stereo1, Stereo2 Rate 0–100, BPM –BPM Depth 0–100 Pre Delay 0.0 msec–40.0 msec Low Cut Flat, 55 Hz –800 Hz High Cut 700 Hz –11.0 kHz, Flat ...

  • Boss Audio Systems GS-10 - page 35

    35 Chapter 4 Introduction to Effects and Parameters Section 4 Rev Time (Reverb Time) Adjusts the length (time) of reverberation. Pre Delay Adjusts the time until the reverb sound appears. Low Cut (Low Cut Filter) This sets the frequency at which the low cut filter begins to take effect. This lets you cut the low-end component below the set frequenc ...

  • Boss Audio Systems GS-10 - page 36

    36 Chapter 4 Introduction to Effects and Parameters FX-1 With FX-1, you can select the effect to be used from the following. • PEDAL WAH • AUTO WAH • TONE MODIFY • ADV. COMP (Advanced Compressor) • LIMITER • ENHANCER • SLOW GEAR • TREMOLO • DEFRETTER • RING MOD (Ring Modulator) • FEEDBACKER Parameter Value On/Off Off, On FX Se ...

  • Boss Audio Systems GS-10 - page 37

    37 Chapter 4 Introduction to Effects and Parameters Section 4 Mode Selection for the wah mode. LPF (Low Pass Filter): This creates a wah effect over a wide frequency range. BPF (Band Pass Filter): This creates a wah effect in a narrow frequency range. Polarity Selection for the direction in which the filter will change in response to the input. Up: ...

  • Boss Audio Systems GS-10 - page 38

    38 Chapter 4 Introduction to Effects and Parameters ACS (Advanced Compressor) This is an effect that produces a long sustain by evening out the volume level of the input signal. You can also use it as a “limiter” to suppress only the sound peaks and prevent distortion. Parameter Value Type Stereo Comp, BOSS Comp, D-Comp Sustain 0–100 Attack 0 ...

  • Boss Audio Systems GS-10 - page 39

    39 Chapter 4 Introduction to Effects and Parameters Section 4 ENH (Enhancer) By adding sounds which are out-of-phase with the direct sound, this effect enhances the definition of the sound, and pushes it to the forefront. Parameter Value Sens 0–100 Freq 800 Hz–10.0 kHz Mix Level 0–100 Sens (Sensitivity) Adjusts the manner in which the enhance ...

  • Boss Audio Systems GS-10 - page 40

    40 Chapter 4 Introduction to Effects and Parameters DF (Defretter) This simulates a fretless guitar. Parameter Value Tone -50–+50 Sens 0–100 Attack 0–100 Depth 0–100 Resonance 0–100 Effect Level 0–100 Direct Level 0–100 Tone Adjusts the amount of blurring between the notes. Sens (Sensitivity) This controls the input sensitivity of the ...

  • Boss Audio Systems GS-10 - page 41

    41 Chapter 4 Introduction to Effects and Parameters Section 4 Rise Time This determines the time needed for the volume of the feedback sound to reach its maximum from the moment the effect is turned on. Rise Time ( ▲ ) This determines the time needed for the volume of the one octave higher feedback sound to reach its maximum from the moment the e ...

  • Boss Audio Systems GS-10 - page 42

    42 Chapter 4 Introduction to Effects and Parameters PH (Phaser) By adding varied-phase portions to the direct sound, the phaser effect gives a whooshing, swirling character to the sound. Parameter Value Type 4 Stage, 8 Stage, 12 Stage, Bi-Phase Rate 0–100, BPM –BPM Depth 0–100 Manual 0–100 Resonance 0–100 Step Rate Off, 0–100, BPM –BP ...

  • Boss Audio Systems GS-10 - page 43

    43 Chapter 4 Introduction to Effects and Parameters Section 4 Resonance Determines the amount of resonance (feedback). Increasing the value will emphasize the effect, creating a more unusual sound. Separation Adjusts the diffusion. The diffusion increases as the value increases. Low Cut (Low Cut Filter) This sets the frequency at which the low cut ...

  • Boss Audio Systems GS-10 - page 44

    44 Chapter 4 Introduction to Effects and Parameters Creating Harmonist Scales (User Scale) When “Harmony” is set to any value from -2oct to +2oct, and the harmony does not sound the way you intend, use a “User scale.” You can set any of 29 different “User scales.” 1. Press [FX-2], then press PARAMETER [ ] [ ] so that “FX Select” is ...

  • Boss Audio Systems GS-10 - page 45

    45 Chapter 4 Introduction to Effects and Parameters Section 4 * When set to BPM, the value of each parameter will be set according to the value of the Master BPM (p. 54) specified for each patch. This makes it easier to achieve effect sound settings that match the tempo of the song (synchronizing the time to twice or four times the time length of t ...

  • Boss Audio Systems GS-10 - page 46

    46 Chapter 4 Introduction to Effects and Parameters Xover f (Crossover Frequency) This parameter sets the frequency at which the frequency components of the direct sound are divided into bass and treble bands. Lo Rate (Low Rate) Adjust the speed of the chorus effect for the low frequency range. * When set to BPM, the value of each parameter will be ...

  • Boss Audio Systems GS-10 - page 47

    47 Chapter 4 Introduction to Effects and Parameters Section 4 Depth This adjusts the depth of the vibrato. Trigger This selects on/off of the vibrato. * It is assumed that this parameter will be assigned (p. 60) to the foot switch. Rise Time This sets the time passing from the moment the trigger is turned on until the set vibrato is obtained. UV (U ...

  • Boss Audio Systems GS-10 - page 48

    48 Chapter 4 Introduction to Effects and Parameters SDD (Short Delay) This is a delay with the maximum delay time of 400 ms. This effect is useful for making the sound fatter. Parameter Value DlyTime 0 ms–400 ms, BPM –BPM Feedback 0–100 Effect Level 0–120 DlyTime (Delay Time) Adjusts the delay time. * When set to BPM, the value of each para ...

  • Boss Audio Systems GS-10 - page 49

    49 Chapter 4 Introduction to Effects and Parameters Section 4 SL (Slicer) This consecutively interrupts the sound to create the impression that a rhythm backing phrase is being played. Parameter Value Pattern P1–P20 Rate 0–100, BPM –BPM Trigger Sens 0–100 Pattern Select the slice pattern that will be used to cut the sound. Rate Adjust the r ...

  • Boss Audio Systems GS-10 - page 50

    50 Chapter 4 Introduction to Effects and Parameters Key Select the key of the song that you wish to play. Attack Adjust the strength of the attack. By adding an attack to each note of the phrase you can produce a sensation as though the notes were being picked. Hold If you turn hold “On” after you pick a note, the effect sound will continue eve ...

  • Boss Audio Systems GS-10 - page 51

    51 Chapter 4 Introduction to Effects and Parameters Section 4 Wave This selects a wave type that is the source of the guitar synthesizer. Square: The unit detects the pitch and attack information from the input guitar sound, then send the square waveform () from the internal sound generator. Saw: The unit detects the pitch and attack information fr ...

  • Boss Audio Systems GS-10 - page 52

    52 Chapter 4 Introduction to Effects and Parameters Velocity This adjusts the amount of the volume change of the synthesizer sound. When it is set to high, the volume change will be greater depending on the picking strength. When it is set to “0,” no volume change is caused even by changing the picking manner. Hold The hold function can sustain ...

  • Boss Audio Systems GS-10 - page 53

    53 Chapter 4 Introduction to Effects and Parameters Section 4 NAME/NS/MASTER You can select the following items in NAME/NS/MASTER. • Name (Patch Name) • Noise Suppressor • Master • Foot Volume • Effect Chain * With each press of [NAME/NS/MASTER], you move to the next item that can be set, in this order: Name → Noise Suppressor → Maste ...

  • Boss Audio Systems GS-10 - page 54

    54 Chapter 4 Introduction to Effects and Parameters Master Parameter Value Patch Level 0–200 Master BPM 40–250 Patch Level This adjusts the output volume of the GS-10. Master BPM Adjust the BPM value for each patch. * BPM (beats per minute) indicates the number of quarter note beats that occur each minute. * When you have an external MIDI devic ...

  • Boss Audio Systems GS-10 - page 55

    55 Section 5 Chapter 5 Creating Original Effects Types (Customize) With the GS-10’s Customize function, you can rely on your own sensibilities and create a totally new effect by tweaking the settings for the “Preamp/Speaker Simulator,” “Overdrive/Distortion,” and “Pedal Wah.” The result can then be saved on the GS-10 as “Custom” s ...

  • Boss Audio Systems GS-10 - page 56

    56 Chapter 5 Creating Original Effects Types (Customize) Customizing the Speakers You can make three different sets of settings, Custom 1 and Custom 2. * The sound of any patch that uses Custom 1 or 2 will be altered if the custom settings are edited. 1. Press the PREAMP/SPEAKER On/Off switch to display the PREAMP/SPEAKER effect screen. 2. Press PA ...

  • Boss Audio Systems GS-10 - page 57

    57 Chapter 5 Creating Original Effects Types (Customize) Section 5 Type Selects the basic type of overdrive/distortion. Bottom Adjusts the amount of distortion in the low frequencies. Top Adjusts the amount of distortion in the high frequencies. Low Adjusts low-frequency tone. High Adjusts the high-frequency tone. Customizing Pedal Wah You can make ...

  • Boss Audio Systems GS-10 - page 58

    58 Chapter 6 Setting the External Pedal Functions This section describes the settings required to use an expression pedal or foot switch connected to the EXP PEDAL/CTL1,2 jack on the rear panel. If you want the external pedal to have the same function at all times In situations such as when you want to use the expression pedal only as a volume peda ...

  • Boss Audio Systems GS-10 - page 59

    59 Chapter 6 Setting the External Pedal Functions Section 6 Setting the External Foot Switch Functions (Control 1, 2 Function) * When connecting two foot switches using the special optional Roland PCS-31 connector cord, the foot switch connected with the white-banded plug functions according to the Control 1 function settings, and the foot switch c ...

  • Boss Audio Systems GS-10 - page 60

    60 Chapter 6 Setting the External Pedal Functions Setting the External Pedal Function for Individual Patches (Assign) There are two ways to set the assignments, “Quick Settings,” which allows you to use [QUICK FX] to complete the settings quickly and easily, and “Manual Settings,” where each parameter is set one at a time. Quick Settings Wh ...

  • Boss Audio Systems GS-10 - page 61

    61 Chapter 6 Setting the External Pedal Functions Section 6 Manual Settings Here, you can individually determine which controller is to control which parameter. fig.06-013 1. Press [ASSIGN]. 2. Press PARAMETER [ ] [ ] to select one of the Assigns from Assign 1–8. 3. Press [ASSIGN] to set the selected Assign to “On.” Each time [ASSIGN] is pres ...

  • Boss Audio Systems GS-10 - page 62

    62 Chapter 6 Setting the External Pedal Functions * Although you can set this so that the same target is controlled by more than one controller, in such cases, make sure not to have different sources changing the parameter at the same time. Changing the parameter simultaneously using different sources may result in noise being generated. Target Ran ...

  • Boss Audio Systems GS-10 - page 63

    63 Chapter 6 Setting the External Pedal Functions Section 6 Source fig.06-090d This sets the controller (source) that affects the target parameter. Controllers that can be selected as the source are shown below. EXP PEDAL Expression pedal connected to the EXP PEDAL/CTL 1, 2 jack. CTL 1, CTL 2 Foot switch connected to the EXP PEDAL/CTL 1, 2 jack. MI ...

  • Boss Audio Systems GS-10 - page 64

    64 Chapter 7 Convenient Functions and System Settings Tuning the Guitar When the Tuner is turned on, sounds input to the GS-10 are output directly as is (bypassed), and the tuner is activated. Under these conditions you can then tune your guitar. Turning the Tuner Function On fig.07-010 Each time [TUNER] is pressed, the Tuner is switched on or off. ...

  • Boss Audio Systems GS-10 - page 65

    65 Chapter 7 Convenient Functions and System Settings Section 7 Bypass: Sounds input to the GS-10 bypass the processing and are output directly as is. * This is set to “Bypass” when shipped from the factory. fig.07-060 1. Press [TUNER], causing the indicator to light. 2. Press PARAMETER [ ] [ ] until you have either “Tuner Pitch” or “Tune ...

  • Boss Audio Systems GS-10 - page 66

    66 Chapter 7 Convenient Functions and System Settings Keeping the Same Pedal Operations When Switching Patches (Assign Hold) This setting determines whether or not the Assign’s (p. 60) operational status is carried over to the next patch when patches are switched. * Assign Hold does not function if the Assign Source mode is set to Toggle (whereby ...

  • Boss Audio Systems GS-10 - page 67

    67 Chapter 7 Convenient Functions and System Settings Section 7 Checking the Effect Output Level with the Level Meter You can meter the output level of each effect. This is handy for checking the effects’ output levels. fig.07-130 1. Press [METER]. fig.07-140d 2. Rotate the PATCH/VALUE dial to select the effect whose level you want to check. * Ef ...

  • Boss Audio Systems GS-10 - page 68

    68 Chapter 8 Using the GS-10 with External MIDI Devices Connected Operations Using MIDI You can perform the following operations using MIDI with the GS-10. * The use of MIDI requires that the MIDI channels of the connected devices match. If the MIDI channel settings are not correct, the GS-10 will be unable to exchange data with other MIDI devices. ...

  • Boss Audio Systems GS-10 - page 69

    69 Chapter 8 Using the GS-10 with External MIDI Devices Connected Section 8 Making the Settings for MIDI Functions Here is a description of the GS-10’s MIDI functions. Set them as needed, depending on the intended use. 1. Press [SYSTEM] a number of times until the following screen appears. fig.08-030d 2. Press PARAMETER [ ] [ ] so that the parame ...

  • Boss Audio Systems GS-10 - page 70

    70 Chapter 8 Using the GS-10 with External MIDI Devices Connected Remote Ctrl (Remote Control) Valid Settings: Standard, Advanced, MMC This setting determines the MIDI messages transmitted when a MIDI sequencer or other external MIDI device is controlled with a foot switch or other controller connected to the GS-10. fig.08-090d Standard: System Rea ...

  • Boss Audio Systems GS-10 - page 71

    71 Chapter 8 Using the GS-10 with External MIDI Devices Connected Section 8 Transmitting and Receiving Settings Data On the GS-10, you can use Exclusive messages to provide another GS-10 with identical settings, and save effect settings on a sequencer or other device. Transmitting data this way is called “ Bulk Dump ,” while receiving such data ...

  • Boss Audio Systems GS-10 - page 72

    72 Chapter 8 Using the GS-10 with External MIDI Devices Connected fig.08-180d When the transmission is completed, the screen prior to transmission returns to the display. 4. Press [EXIT] to return to the Play screen. Receiving Data from an External MIDI Device (Bulk Load) Making the Connections When Receiving Data Saved on a MIDI Sequencer Connect ...

  • Boss Audio Systems GS-10 - page 73

    73 Chapter 8 Using the GS-10 with External MIDI Devices Connected Section 8 Setting the Program Change Map When switching patches using Program Change messages transmitted by an external MIDI device, you can freely set the correspondence between Program Change messages received by the GS-10 and the patches to be switched to in the “Program Change ...

  • Boss Audio Systems GS-10 - page 74

    74 Chapter 8 Using the GS-10 with External MIDI Devices Connected Enabling/Disabling the Program Change Map Settings (MIDI Map Select) This setting determines whether patches are switched according to the Program Change Map settings, or to the default settings. 1. Press [SYSTEM], then press PARAMETER [ ] [] so that “MIDI:Map Select” is displaye ...

  • Boss Audio Systems GS-10 - page 75

    75 Chapter 8 Using the GS-10 with External MIDI Devices Connected Section 8 Controlling Recorders and Sequencers Remotely from the GS-10 (Remote Control) If you have a MIDI-controllable recorder, sequencer, or other such external MIDI device connected to the GS-10, you can connect a foot switch to the EXP PEDAL CTL 1,2 jack and use it for remote co ...

  • Boss Audio Systems GS-10 - page 76

    76 Chapter 8 Using the GS-10 with External MIDI Devices Connected Controlling the Device Remotely Making the Connections Make the connections as shown below. fig.08-280 * For more on the operation of the connected device, refer to the owner’s manual for the device you are using. Setting 1. Follow the instructions in “Setting the Messages Used f ...

  • Boss Audio Systems GS-10 - page 77

    77 Chapter 8 Using the GS-10 with External MIDI Devices Connected Section 8 Settings Example: When Using SONAR 2.0 The following settings allow you to control the sequencer Play/Stop, Reset, and Record functions from the GS-10. (With SONAR 2.0, these are set according to note names (Keys) rather than Note messages.) 1. From the Options menu, choose ...

  • Boss Audio Systems GS-10 - page 78

    78 Chapter 9 Using the GS-10 Connected to a Computer Via USB Before Connecting with USB With the GS-10, you can use USB to transmit both digital audio signals and MIDI messages between the GS-10 and your computer. This requires installation of a USB driver on your computer so that it can work with the GS-10’s driver mode settings. For instruction ...

  • Boss Audio Systems GS-10 - page 79

    79 Chapter 9 Using the GS-10 Connected to a Computer Via USB Section 9 Enabling and Disabling the Direct Monitor Command This setting determines whether or not the command (the Direct Monitor command) controlling the Direct Monitor (described later) setting is enabled. 1. Press [USB]. 2. Press PARAMETER [ ] [ ] “Monitor Cmd” is displayed.fig. 0 ...

  • Boss Audio Systems GS-10 - page 80

    80 Chapter 9 Using the GS-10 Connected to a Computer Via USB Switching the Driver Mode After first installing both the special and standard drivers and then switching the GS-10’s driver mode, you can switch between the special driver and the standard driver to use the one you need. For more on installing the drivers, refer to “Installing & ...

  • Boss Audio Systems GS-10 - page 81

    81 Chapter 9 Using the GS-10 Connected to a Computer Via USB Section 9 Recording the GS-10’s Output with a Computer Set your application (such as a sequencer) so that the audio input port it uses is the GS-10. You can freely set the point in the signal chain from which to extract the signal to be sent to the computer with Effect Chain (p. 24). Fo ...

  • Boss Audio Systems GS-10 - page 82

    82 Appendices About MIDI MIDI is an acronym for Musical Instrument Digital Interface, and is a world-wide standard for allowing electronic musical equipment to communicate by transmitting messages such as performance information and sound selections. Any MIDI equipped device is able to transmit applicable types of data to another MIDI equipped devi ...

  • Boss Audio Systems GS-10 - page 83

    83 Appendices Appendices About the MIDI implementation MIDI allows a variety of messages to be exchanged between instruments, but it is not necessarily the case that all types of message can be exchanged between any two MIDI devices. Two devices can communicate only if they both use the types of messages that they have in common. Thus, every owner? ...

  • Boss Audio Systems GS-10 - page 84

    84 Appendices Patch List No. Patch Name OD/DS Ch. Select ch-A ch-B ch-C P101 POWER LEAD - A MS1959(I) Drive Stack Metal Lead P102 WARM CLEAN - A Warm Clean Warm Clean JC-120 P103 BRIT VALVES - A VO Drive MS1959(I) MS HiGain P104 METAL MASTERS - A T-Amp Lead R-FIER Red 5150 Drive P105 ATTIC AMPS - A Pro Crunch Clean TWIN VO Lead P106 WARM OVERDRIVE ...

  • Boss Audio Systems GS-10 - page 85

    85 Appendices Appendices * With the factory settings, the content of the User patches is the same as that of the Preset patches. * Patches with [Mic] appended to the name are for use with mics. Sound from the GUITAR/BASS jack won’t be heard. * Patches with [Bass] appended to the name are for use with basses. No. Patch Name OD/DS Ch. Select ch-A c ...

  • Boss Audio Systems GS-10 - page 86

    86 Appendices Restoring the Factory Settings (Factory Reset) Restoring the GS-10 to the settings made at the factory is referred to as “Factory Reset.” Not only can you return all of the settings to the values in effect when the GS-10 was shipped from the factory, you can also specify the range of settings to be reset. fig.10-040 1. Turn off th ...

  • Boss Audio Systems GS-10 - page 87

    87 Appendices Appendices Roland Exclusive Messages 1. Data Format for Exclusive Messages Roland’s MIDI implementation uses the following data format for all Exclusive messages (type IV): •MIDI status: F0H, F7H An Exclusive message must be flanked by a pair of status codes, starting with a Manufacturer ID immediately after F0H (MIDI version 1.0) ...

  • Boss Audio Systems GS-10 - page 88

    88 Appendices * The size of the requested data does not indicate the number of bytes that will make up a DT1 message, but represents the address fields where the requested data resides. * Some models are subject to limitations in data format used for a single transaction. Requested data, for example, may have a limit in length or must be divided in ...

  • Boss Audio Systems GS-10 - page 89

    89 Appendices Appendices MIDI Implementation Model: GS-10 Date: Jul. 15, 2003 Version: 1.00 1. RECOGNIZED RECEIVE DATA ■ CHANNEL VOICE MESSAGE ● Control Change Status Second Third BnH ccH vvH n = MIDI Channel Number: 0H - FH (ch.1 - ch.16) cc = Controller Number: 00H, 20H (0, 32) 01H - 1FH (1 - 31) 40H - 5FH (64 - 95) vv = Value: 00H - 7FH (0 - ...

  • Boss Audio Systems GS-10 - page 90

    90 Appendices ● MIDI Machine Control (MMC) F0H 7FH 7FH 06H com F7H F0H = System Exclusive 7FH = ID Number (Universal Realtime Message) 7FH = Device ID (Broadcast) 06H = Sub ID#1(Machine Control Command) com = Sub ID#2(MMC Command) F7H = EOX (End of Exclusive/System common) * “com” (MMC Command) that I transmit with GS-10 is following. 01H Sto ...

  • Boss Audio Systems GS-10 - page 91

    91 Appendices Appendices Address Block Map ---------------------------------------------------------------------------------------- Address Block Sub Block Note 00 00 00 00 +---------------+ +-----------------------------+ | SYSTEM | | TUNER | ... Individual | | +-----------------------------+ *Refer to "Table TUNER" 01 00 00 00 | | +---- ...

  • Boss Audio Systems GS-10 - page 92

    92 Appendices Patch Change When transmitted: Transmits the patch number. DATA: Patch Number When received: Changes the Patch. DATA: Patch Number Data size is fixed at 2 bytes. Upon receiving RQ1, the GS-10 replies with the patch number. Request size to the GS-10 at this time is fixed at 2 bytes (set at 00 00 00 02). Patch Write When received: After ...

  • Boss Audio Systems GS-10 - page 93

    93 Appendices Appendices Table DIRECT PATCH <SYSTEM: DIRECT PATCH> -------------------------------------------------------------------------------------------------------------- Address(H) Size(H) Data(H) Parameter Description -------------------------------------------------------------------------------------------------------------- 01 01 ...

  • Boss Audio Systems GS-10 - page 94

    94 Appendices Table MIDI <SYSTEM: MIDI> -------------------------------------------------------------------------------------------------------------- Address(H) Size(H) Data(H) Parameter Description -------------------------------------------------------------------------------------------------------------- 01 04 00 00 00 00 00 01 00 - 0F M ...

  • Boss Audio Systems GS-10 - page 95

    95 Appendices Appendices Table HARMONIST <HARMONIST User Scale> -------------------------------------------------------------------------------------------------------------- Address(H) Size(H) Data(H) Parameter Description -------------------------------------------------------------------------------------------------------------- --- Scale ...

  • Boss Audio Systems GS-10 - page 96

    96 Appendices --- Scale 9 --- 03 00 08 00 00 00 00 01 00 - 30 Scale 9 C *Refer to "Table HR Harmony Note" 03 00 08 01 00 00 00 01 00 - 30 Scale 9 Db 03 00 08 02 00 00 00 01 00 - 30 Scale 9 D 03 00 08 03 00 00 00 01 00 - 30 Scale 9 Eb 03 00 08 04 00 00 00 01 00 - 30 Scale 9 E 03 00 08 05 00 00 00 01 00 - 30 Scale 9 F 03 00 08 06 00 00 00 0 ...

  • Boss Audio Systems GS-10 - page 97

    97 Appendices Appendices --- Scale 18 --- 03 00 11 00 00 00 00 01 00 - 30 Scale 18 C *Refer to "Table HR Harmony Note" 03 00 11 01 00 00 00 01 00 - 30 Scale 18 Db 03 00 11 02 00 00 00 01 00 - 30 Scale 18 D 03 00 11 03 00 00 00 01 00 - 30 Scale 18 Eb 03 00 11 04 00 00 00 01 00 - 30 Scale 18 E 03 00 11 05 00 00 00 01 00 - 30 Scale 18 F 03 0 ...

  • Boss Audio Systems GS-10 - page 98

    98 Appendices --- Scale 27 --- 03 00 1A 00 00 00 00 01 00 - 30 Scale 27 C *Refer to "Table HR Harmony Note" 03 00 1A 01 00 00 00 01 00 - 30 Scale 27 Db 03 00 1A 02 00 00 00 01 00 - 30 Scale 27 D 03 00 1A 03 00 00 00 01 00 - 30 Scale 27 Eb 03 00 1A 04 00 00 00 01 00 - 30 Scale 27 E 03 00 1A 05 00 00 00 01 00 - 30 Scale 27 F 03 00 1A 06 00 ...

  • Boss Audio Systems GS-10 - page 99

    99 Appendices Appendices Table AUTO RIFF <AUTO RIFF User Phrase> -------------------------------------------------------------------------------------------------------------- Address(H) Size(H) Data(H) Parameter Description -------------------------------------------------------------------------------------------------------------- 03 01 00 ...

  • Boss Audio Systems GS-10 - page 100

    100 Appendices 03 01 00 6E 00 00 00 01 00 - 32 User 1 F# Step15 03 01 00 6F 00 00 00 01 00 - 32 User 1 F# Step16 03 01 00 70 00 00 00 01 00 - 32 User 1 G Step1 *Refer to "Table AR Step Note" 03 01 00 71 00 00 00 01 00 - 32 User 1 G Step2 03 01 00 72 00 00 00 01 00 - 32 User 1 G Step3 03 01 00 73 00 00 00 01 00 - 32 User 1 G Step4 03 01 00 ...

  • Boss Audio Systems GS-10 - page 101

    101 Appendices Appendices Table AR Step Note <AUTO RIFF User Phrase> ---------------- ---------------- Data(H) Description ---------------- ---------------- Below is an explanation of the Description value when IN is C. Replace each of the values when IN is something other than C. 00 Pitch = -C ↓↓ 01 Pitch = -Db ↓ 02 Pitch = -D ↓ 03 P ...

  • Boss Audio Systems GS-10 - page 102

    102 Appendices Table AMP <AMP Customize> -------------------------------------------------------------------------------------------------------------- Address(H) Size(H) Data(H) Parameter Description -------------------------------------------------------------------------------------------------------------- 03 02 00 00 00 00 00 01 00 - 06 ...

  • Boss Audio Systems GS-10 - page 103

    103 Appendices Appendices Table OD/DS <OD/DS Customize> -------------------------------------------------------------------------------------------------------------- Address(H) Size(H) Data(H) Parameter Description -------------------------------------------------------------------------------------------------------------- 03 04 00 00 00 00 ...

  • Boss Audio Systems GS-10 - page 104

    104 Appendices Table Quick Fx Data <Quick Fx Data> -------------------------------------------------------------------------------------------------------------- Address(H) Size(H) Data(H) Parameter Description -------------------------------------------------------------------------------------------------------------- 04 00 ** ** P1(Read On ...

  • Boss Audio Systems GS-10 - page 105

    105 Appendices Appendices --- COMP --- ** ** 01 00 00 00 00 02 00 - 64 CS :Sustain ** ** 01 02 00 00 00 02 00 - 64 CS :Level --- OD/DS --- ** ** 02 00 00 00 00 02 00 - 18 OD :Type *Refer to "Table OD Type" ** ** 02 02 00 00 00 02 00 - 64 OD :Drive ** ** 02 04 00 00 00 02 00 - 64 OD :Bass ** ** 02 06 00 00 00 02 00 - 64 OD :Treble ** ** 02 ...

  • Boss Audio Systems GS-10 - page 106

    106 Appendices 00 00 00 02 00 - 64 AR :Sensitivity 00 00 00 02 00 - 02 SYN:Octave Shift *Refer to "Table Patch" BS :--- 00 00 00 02 00 - 28 SEQ:Low-Middle EQ ** ** 05 0A 00 00 00 02 00 - 64 PH :Resonance 00 00 00 02 00 - 64 FL :Separation 00 00 00 02 00 - 64 HR :HR1 Feedback 00 00 00 04 00 00 - PS :PS1 Pre Delay *Refer to "Table Pre ...

  • Boss Audio Systems GS-10 - page 107

    107 Appendices Appendices 00 00 00 02 00 - 64 SYN:FLT.Decay BS :--- SEQ:--- ** ** 05 16 PH :--- FL :--- 00 00 00 02 00 - 0B HR :Key *Refer to "Table Patch" 00 00 00 02 00 - 64 PS :PS2 Fine OC :--- PB :--- 2CE:--- PAN:--- VB :--- UV :--- RT :--- SDD:--- HU :--- SL :--- AR :--- 00 00 00 02 00 - 64 SYN:FLT.Depth *Refer to "Table Patch&q ...

  • Boss Audio Systems GS-10 - page 108

    108 Appendices 00 00 00 02 00 - 64 SYN:Synth Level BS :--- SEQ:--- ** ** 05 22 PH :--- FL :--- HR :--- PS :--- OC :--- PB :--- 2CE:--- PAN:--- VB :--- UV :--- RT :--- SDD:--- HU :--- SL :--- AR :--- 00 00 00 02 00 - 64 SYN:Direct Level BS :--- SEQ:--- --- DELAY --- ** ** 06 00 00 00 00 02 00 - 02 DD :Type *Refer to "Table Patch" ** ** 06 ...

  • Boss Audio Systems GS-10 - page 109

    109 Appendices Appendices --- FX-2 --- ** ** 05 00 00 00 00 01 20 - 7F Name 1 *Refer to "Table Name" ** ** 05 01# 00 00 00 01 20 - 7F Name 2 ** ** : : : : : ** ** 05 0B# 00 00 00 01 20 - 7F Name 12 --- DELAY --- ** ** 06 00 00 00 00 01 20 - 7F Name 1 *Refer to "Table Name" ** ** 06 01# 00 00 00 01 20 - 7F Name 2 ** ** : : : : : ...

  • Boss Audio Systems GS-10 - page 110

    110 Appendices 01 : Rack 160D 02 : Vtg Rack U ** ** 00 17 00 00 00 01 00 - 64 LM :Attack 0 - 100 ** ** 00 18 00 00 00 01 00 - 64 LM :Threshold 0 - 100 ** ** 00 19 00 00 00 01 00 - 11 LM :Ratio *Refer to "Table Ratio" ** ** 00 1A 00 00 00 01 00 - 64 LM :Release 0 - 100 ** ** 00 1B 00 00 00 01 00 - 64 LM :Level 0 - 100 ** ** 00 1C 00 00 00 ...

  • Boss Audio Systems GS-10 - page 111

    111 Appendices Appendices ** ** 03 18 00 00 00 01 00 - 01 PRE/SP:Bright (Bch) ** ** 03 19 00 00 00 01 00 - 02 PRE/SP:Gain SW (Bch) ** ** 03 1A 00 00 00 01 00 - 09 PRE/SP:Speaker Type (Bch) ** ** 03 1B 00 00 00 01 00 - 04 PRE/SP:Mic Type (Bch) ** ** 03 1C 00 00 00 01 00 - 01 PRE/SP:Mic Distance (Bch) ** ** 03 1D 00 00 00 01 00 - 0A PRE/SP:Mic Positi ...

  • Boss Audio Systems GS-10 - page 112

    112 Appendices ** ** 05 2B 00 00 00 01 00 - 64 PS :PS2 Level 0 - 100 ** ** 05 2C 00 00 00 01 00 - 64 PS :Direct Level 0 - 100 ** ** 05 2D 00 00 00 01 00 - 03 OC :Range *Refer to "Table OC Range" ** ** 05 2E 00 00 00 01 00 - 64 OC :Octave Level 0 - 100 ** ** 05 2F 00 00 00 01 00 - 64 OC :Direct Level 0 - 100 ** ** 05 30 00 00 00 01 00 - 30 ...

  • Boss Audio Systems GS-10 - page 113

    113 Appendices Appendices ** ** 06 00 00 00 00 01 00 - 28 SEQ:High EQ -20dB - +20dB ** ** 06 01 00 00 00 01 00 - 28 SEQ:Level -20dB - +20dB --- DELAY --- ** ** 07 00 00 00 00 01 00 - 01 DD :On/Off 00 : Off 01 : On ** ** 07 01 00 00 00 01 00 - 02 DD :Type 00 : Single 01 : Pan 02 : Stereo ** ** 07 02 00 00 00 01 00 - 66 DD :DlyTime *Refer to "Ta ...

  • Boss Audio Systems GS-10 - page 114

    114 Appendices --- ASSIGN 2 --- ** ** 0F 00 00 00 00 01 00 - 01 ASSIGN 2:On/Off 00 : Off 01 : On ** ** 0F 01 00 00 00 02 00 00 - ASSIGN 2:Target *Refer to "Table Target" ** ** 0F 02# - 01 7F ** ** 0F 03 00 00 00 02 xx xx - ASSIGN 2:Target Min [Target Param Min <= Data <= Target Param Max] ** ** 0F 04# - xx xx ** ** 0F 05 00 00 00 02 ...

  • Boss Audio Systems GS-10 - page 115

    115 Appendices Appendices Table Patch Change <Patch Change> -------------------------------------------------------------------------------------------------------------- Address(H) Size(H) Data(H) Parameter Description -------------------------------------------------------------------------------------------------------------- --- PatchChan ...

  • Boss Audio Systems GS-10 - page 116

    116 Appendices Table Quick Fx Target <Quick Fx: Assign Target> ---------------- ---------------- Data(H) Description ---------------- ---------------- 00 00 00 00 FX1:On/Off 00 00 00 01 FX1:FX Select 00 00 00 02 PW :Type 00 00 00 03 PW :Pdl Position 00 00 00 04 PW :Level 00 00 00 05 AW :Mode 00 00 00 06 AW :Polarity 00 00 00 07 AW :Sensitivit ...

  • Boss Audio Systems GS-10 - page 117

    117 Appendices Appendices 00 00 0E 01 CE :Mode 00 00 0E 02 CE :Rate 00 00 0E 03 CE :Depth 00 00 0E 04 CE :Pre Delay 00 00 0E 05 CE :Low Cut Filter 00 00 0E 06 CE :High Cut Filter 00 00 0E 07 CE :Effect Level 00 00 0E 08 RV :On/Off 00 00 0E 09 RV :Type 00 00 0E 0A RV :Reverb Time 00 00 0E 0B RV :Pre Delay 00 00 0E 0C RV :Low Cut Filter 00 00 0E 0D R ...

  • Boss Audio Systems GS-10 - page 118

    118 Appendices Table EQ Middle Frequency <EQ(SEQ): Lo(Hi)-Mid f> ---------------- ---------------- Data(H) Description ---------------- ---------------- 00 20.0Hz 01 25.0Hz 02 31.5Hz 03 40.0Hz 04 50.0Hz 05 63.0Hz 06 80.0Hz 07 100Hz 08 125Hz 09 160Hz 0A 200Hz 0B 250Hz 0C 315Hz 0D 400Hz 0E 500Hz 0F 630Hz 10 800Hz 11 1.00kHz 12 1.25kHz 13 1.60kH ...

  • Boss Audio Systems GS-10 - page 119

    119 Appendices Appendices Table HR Scale <Harmony Scale> --------------------------------------------- Table OC Range <OC: Range> ---------------- ---------------- Data(H) Description ---------------- ---------------- Gt. or Mic Bass 00 1 (Gt. or Mic) 7th string, open to 1st string, 24th fret (Bass) 24th fret LoB, open to HiC, 24th fret ...

  • Boss Audio Systems GS-10 - page 120

    120 Appendices Table Chain <Effect Chain> ---------------- ---------------- Data(H) Description ---------------- ---------------- 00 FX-1 01 Compressor 02 Overdrive/Distortion 03 Preamp/Speaker Simulator 04 Equalizer 05 FX-2 06 Delay 07 Chorus 08 Reverb 09 Noise Suppressor 0A Foot Volume 0B USB Table Name <Name Edit> ---------------- -- ...

  • Boss Audio Systems GS-10 - page 121

    121 Appendices Appendices 00 6E HR :HR1 Harmony 00 6F HR :HR1 Pre Delay 00 70 HR :HR1 Feedback 00 71 HR :HR1 Level 00 72 HR :HR2 Harmony 00 73 HR :HR2 Pre Delay 00 74 HR :HR2 Level 00 75 HR :Key 00 76 HR :Direct Level 00 77 PS :Voice 00 78 PS :PS1 Mode 00 79 PS :PS1 Pitch 00 7A PS :PS1 Fine 00 7B PS :PS1 Pre Delay 00 7C PS :PS1 Feedback 00 7D PS :P ...

  • Boss Audio Systems GS-10 - page 122

    122 Appendices MIDI Implementation Chart Function... Basic Channel Mode Note Number : Velocity After Touch Pitch Bend Control Change Prog Change System Exclusive System Common System Real Time Aux Message Notes Transmitted Recognized Remarks Default Changed Default Messages Altered True Voice Note ON Note OFF Key's Ch's 0, 32 1–31 33– ...

  • Boss Audio Systems GS-10 - page 123

    123 Appendices Appendices Specifications GS-10: Guitar Effects System with USB Audio Interface Rated Power Output 1.5 W + 1.5 W Signal Processing AD Conversion: 24 bit + AF method DA Conversion: 24 bit Digital Out/USB Audio: 24 bit Sampling Frequency 44.1 kHz Program Memories 200: 100 (User) + 100 (Preset) Nominal Input Level GUITAR/BASS INPUT: -10 ...

  • Boss Audio Systems GS-10 - page 124

    124 Appendices FX-1 button FX-2 button EQ button NAME/NS/MASTER button ASSIGN button INPUT SELECT button QUICK FX button PARAMETER button L/R EXIT button WRITE button TUNER button USB button SPEAKER ON/OFF button METER button SYSTEM button DIRECT PATCH button 1–4 AUX INPUT LEVEL knob OUTPUT LEVEL knob PATCH/VALUE dial Power Supply AC 14 V; Supply ...

  • Boss Audio Systems GS-10 - page 125

    125 Installing & Setup the USB Driver In order to use the GS-10 USB, you must first install the USB driver. The USB Driver is included in the “GS-10 SOFTWARE CD-ROM.” ■ What is USB Driver? The USB Driver is software which passes data between the GS-10 and the application (sequencer software etc.) that is running on the USB-connected compu ...

  • Boss Audio Systems GS-10 - page 126

    126 Installing & Setting Up the Driver (Windows) Special Driver and Standard Driver The GS-10 features two operational modes, each of which uses a different type of driver, with one mode using the special driver on the CD-ROM included with the GS-10 and the other mode using the standard Windows driver. Before installing the drivers, you must fi ...

  • Boss Audio Systems GS-10 - page 127

    127 Installing & Setting Up the Driver (Windows) Installing the special driver ■ Windows XP/2000 users Windows XP 1. With the GS-10 disconnected, start up Windows. Disconnect all USB cables except for a USB keyboard and USB mouse (if used). 2. Open “Control Panel” from the Windows Start menu, then open the “System Properties” dialog. ...

  • Boss Audio Systems GS-10 - page 128

    128 Installing & Setting Up the Driver (Windows) 9. In the dialog box that appears, input the following into the “Open” field, and click [OK]. D:DRIVERUSB_XP2kSETUPINF.EXE * The drive name “D:” may be different for your system. Specify the drive name of your CD-ROM drive. fig.11-030 The “SetupInf” dialog box will appear, with “ ...

  • Boss Audio Systems GS-10 - page 129

    129 Installing & Setting Up the Driver (Windows) fig.11-060 14. Select “Don’t search. I will choose the driver to install”, and click [Next]. fig.11-070 15. Make sure that the “Model” field indicates “BOSS GS-10”, and click [Next]. Driver installation will begin. The Insert Disk dialog box will appear. fig.11-090 16. Click [OK]. T ...

  • Boss Audio Systems GS-10 - page 130

    130 Installing & Setting Up the Driver (Windows) 17. Input the following into the “Copy files from” field, and click [OK]. D:DRIVERUSB_XP2k * The drive name “D:” may be different for your system. Specify the drive name of your CD-ROM drive. fig.11-100 The Found New Hardware Wizard will appear. fig.11-120 18. Verify that “BOSS GS-10? ...

  • Boss Audio Systems GS-10 - page 131

    131 Installing & Setting Up the Driver (Windows) Windows 2000 1. With the GS-10 disconnected, start up Windows. Disconnect all USB cables except for a USB keyboard and USB mouse (if used). 2. Click the Windows Start button, and from the menu that appears, select “Settings | Control Panel.” In “Control Panel,” double-click the System ico ...

  • Boss Audio Systems GS-10 - page 132

    132 Installing & Setting Up the Driver (Windows) 9. In the dialog box that appears, input the following into the “Open” field, and click [OK]. D:DRIVERUSB_XP2kSETUPINF.EXE * The drive name “D:” may be different for your system. Specify the drive name of your CD-ROM drive. fig.11-150 The “SetupInf” dialog box will appear, with “ ...

  • Boss Audio Systems GS-10 - page 133

    133 Installing & Setting Up the Driver (Windows) fig.11-180 13. Click [OK]. The “Files Needed” dialog box will appear. 14. In the Copy files from field, type the folder name that is shown in the dialog box, and click [OK]. D:DRIVERUSB_XP2k * The drive name “D:” may be different for your system. Specify the drive name of your CD-ROM dr ...

  • Boss Audio Systems GS-10 - page 134

    134 Installing & Setting Up the Driver (Windows) 15. Verify that “BOSS GS-10” is displayed, and click [Finish]. Driver installation will begin. When driver installation has been completed, the “System Settings Change” dialog box will appear. fig.11-220 16. Click [Yes]. Windows will restart automatically. → Next, you need to make the d ...

  • Boss Audio Systems GS-10 - page 135

    135 Installing & Setting Up the Driver (Windows) ■ Windows Me/98 users 1. With the GS-10 disconnected, start up Windows. Disconnect all USB cables except for a USB keyboard and USB mouse (if used). 2. Exit all currently running software (applications). Also close any open windows. If you are using virus checking or similar software, be sure t ...

  • Boss Audio Systems GS-10 - page 136

    136 Installing & Setting Up the Driver (Windows) Installing the OS-standard driver ■ Windows XP/2000 users 1. With the GS-10 disconnected, start up Windows. Disconnect all USB cables except for a USB keyboard and USB mouse (if used). 2. Exit all currently running software (applications). Also close any open windows. If you are using virus che ...

  • Boss Audio Systems GS-10 - page 137

    137 Installing & Setting Up the Driver (Windows) ■ Windows Me users 1. With the GS-10 disconnected, start up Windows. Disconnect all USB cables except for a USB keyboard and USB mouse (if used). 2. Exit all currently running software (applications). Also close any open windows. If you are using virus checking or similar software, be sure to e ...

  • Boss Audio Systems GS-10 - page 138

    138 Installing & Setting Up the Driver (Windows) ■ Windows 98 users The USB composite device driver is installed first, then the USB audio device driver is installed. Use the following procedure to install the drivers. 1. With the GS-10 disconnected, start up Windows. Disconnect all USB cables except for a USB keyboard and USB mouse (if used) ...

  • Boss Audio Systems GS-10 - page 139

    139 Installing & Setting Up the Driver (Windows) 8. Check CD-ROM drive, and click [Next]. A dialog box like the one shown below will appear. fig.11-310 9. Click [Next] File (driver) copying will begin. When installation of the USB Composite Device driver is completed, a dialog box like the one shown below will appear. fig.11-330 10. Click [Fini ...

  • Boss Audio Systems GS-10 - page 140

    140 Installing & Setting Up the Driver (Windows) 11. Click [Next], and proceed with the installation in the same way as in steps 8–10. When installation of the USB audio device driver is complete, a dialog box like the one shown here will appear. fig.11-341 12. Click [Finish]. Installation of the USB composite device driver and USB audio devi ...

  • Boss Audio Systems GS-10 - page 141

    141 Installing & Setting Up the Driver (Windows) Driver settings ■ About the input/output devices Audio output devices BOSS GS-10 This sends audio data from the computer to the GS-10. This is the setting you will normally use, such as when using the GS-10 with Media Player. You will also select this setting when using an application such as S ...

  • Boss Audio Systems GS-10 - page 142

    142 Installing & Setting Up the Driver (Windows) ■ Specifying the audio input/output destination Windows XP/2000/Me users 1. Open Control Panel. Windows XP 1) Click the Windows start button, and from the menu that appears, select “Control Panel.” Windows 2000/Me 1) Click the Windows Start button, and from the menu that appears, select “ ...

  • Boss Audio Systems GS-10 - page 143

    143 Installing & Setting Up the Driver (Windows) Windows 98 users 1. Click the Windows Start button, and from the menu that appears, select “Settings | Control Panel.” The “Control Panel” will appear. 2. In Control Panel, double-click the “Multimedia” icon. 3. Click the “Audio” tab. fig.11-360 4. Specify the “Preferred device. ...

  • Boss Audio Systems GS-10 - page 144

    144 Installing & Setting Up the Driver (Windows) ■ Volume Control setting 1. Click the Windows Start button, and select “Programs | Accessories | Entertainment | Volume Control.” The “Volume Control” dialog box will apper. fig.11-380 2. Raise or lower the slider to adjust the volume of the GS-10. The GS-10 can use the Windows “volum ...

  • Boss Audio Systems GS-10 - page 145

    145 Installing & Setting Up the Driver (Windows) When playing audio CDs from the computer’s internal CD-ROM drive, or using the GS-10 to play game music Windows XP/2000 users: 1. Open the “System Properties” dialog box. Windows XP- Click the Windows start button, and from the menu that appears, select “Control Panel.” Windows 2000- Se ...

  • Boss Audio Systems GS-10 - page 146

    146 Installing & Setting Up the Driver (Macintosh) Special Driver and Standard Driver The GS-10 features two operational modes, each of which uses a different type of driver, with one mode using the special driver on the CD-ROM included with the GS-10 and the other mode using the standard Mac OS driver. Before installing the drivers, you must f ...

  • Boss Audio Systems GS-10 - page 147

    147 Installing & Setting Up the Driver (Macintosh) Use the following procedure to install the GS-10 driver. 1. Exit all currently running software (applications). If you are using a virus checker or similar software, be sure to exit this as well. 2. Insert the CD-ROM into the CD-ROM drive. 3. Double-click the “GS-10 Driver-E Installer” icon ...

  • Boss Audio Systems GS-10 - page 148

    148 Installing & Setting Up the Driver (Macintosh) OMS settings If other MIDI devices are connected, you must turn off the power on all devices, and then make OMS settings according to the following procedure. For more on connecting MIDI sound modules, refer to the owner’s manual for the MIDI sound module you are using. 1. Before connecting t ...

  • Boss Audio Systems GS-10 - page 149

    149 Installing & Setting Up the Driver (Macintosh) 5. Click [Search]. 6. When the search has been completed, verify that the “OMS Driver Setup” dialog box lists the BOSS GS-10, and click [OK]. fig.11-430 * If the dialog box does not show “BOSS GS-10,” check whether the GS-10 is connected correctly, and start up OMS Setup once again. 7. ...

  • Boss Audio Systems GS-10 - page 150

    150 Installing & Setting Up the Driver (Macintosh) 11. From the Edit menu, select “OMS MIDI Setup”. In the OMS MIDI Setup dialog box that appears, check “Run MIDI in background,” and click [OK]. fig.11-460 12. Verify that MIDI transmission and reception occur correctly. From the Studio menu, choose [Test Studio]. fig.11-470 13. If a MID ...

  • Boss Audio Systems GS-10 - page 151

    151 Installing & Setting Up the Driver (Macintosh) FreeMIDI settings If other MIDI devices are connected, you must turn off the power on all devices, and then make FreeMIDI settings according to the following procedure. For more on connecting MIDI sound modules, refer to the owner’s manual for the MIDI sound module you are using. 1. Before co ...

  • Boss Audio Systems GS-10 - page 152

    152 Installing & Setting Up the Driver (Macintosh) The About Quick Setup dialog box will appear. fig.11-520 * If the dialog will not appear, select “Quick Setup” from the Configuration menu. 7. Click [Continue]. * If the dialog box does not show “GS-10 Driver,” check whether the GS-10 is connected correctly, and start up FreeMIDI Setup ...

  • Boss Audio Systems GS-10 - page 153

    153 Installing & Setting Up the Driver (Macintosh) 14. If a MIDI sound module is connected to the GS-10’s MIDI OUT connector, click the GS-10 MIDI IN,OUT icon in the setting window. If you hear sound, the settings have been made correctly. fig.11-540 GS-10 MIDI IN,OUT corresponds to the GS-10’s MIDI IN,MIDI OUT. GS-10 CONTROL corresponds to ...

  • Boss Audio Systems GS-10 - page 154

    154 Installing & Setting Up the Driver (Macintosh) Installing the ASIO driver You must install the MIDI driver even if you will be using only audio on the GS-10. * Be sure to install the MIDI driver before you install the ASIO driver. This section explains how to install the ASIO driver that allows the GS-10 to be used by your sequencer softwar ...

  • Boss Audio Systems GS-10 - page 155

    155 Installing & Setting Up the Driver (Macintosh) ■ Mac OS X users 1. With the GS-10 disconnected, start up Mac OS. Disconnect all USB cables except for a USB keyboard and USB mouse (if used). 2. Insert the CD-ROM into the CD-ROM drive. 3. Double-click the “GS10USBDriver” icon (found in the Driver (Mac OS X) of the CD-ROM). In case of Ma ...

  • Boss Audio Systems GS-10 - page 156

    156 Installing & Setting Up the Driver (Macintosh) 8. Click [Continue Installation]. The display will indicate “The software was successfully installed.” fig.11-610 9. Click [Restart] to restart your Macintosh. ...

  • Boss Audio Systems GS-10 - page 157

    157 Installing & Setting Up the Driver (Macintosh) Installing the OS-standard driver ■ Mac OS 9/8 users 1. With the GS-10 disconnected, start up Mac OS. 2. Exit all currently running software (applications). If you are using a virus checker or similar software, be sure to exit it as well. 3. After starting up Mac OS, select Apple System Profi ...

  • Boss Audio Systems GS-10 - page 158

    158 Installing & Setting Up the Driver (Macintosh) Settings the sound input/output 1. From the Apple menu, select “Control Panel” – “Sound.” The “Sound” dialog box will appear. fig.11-640 The “Sound” dialog box will appear. 2. Click the “Speakers” tab or “Speaker” Settings. fig.11-650 3. With the volume turned down on ...

  • Boss Audio Systems GS-10 - page 159

    159 Installing & Setting Up the Driver (Macintosh) 5. In “Choose a source for sound input (Device),” select “USB audio.” fig.11-670 * Do not check “Play sound through output device”. 6. When you are finished making settings, close the “Sound” dialog box. 7. From the File menu, select “Quit.” If USB audio is not displayed, cl ...

  • Boss Audio Systems GS-10 - page 160

    160 Installing & Setting Up the Driver (Macintosh) ■ Mac OS X users 1. With the GS-10 disconnected, start up Mac OS. Disconnect all USB cables except for a USB keyboard and USB mouse (if used). 2. Exit all currently running software (applications). Also close any open windows. If you are using virus checking or similar software, be sure to ex ...

  • Boss Audio Systems GS-10 - page 161

    161 Installing & Setting Up the Driver (Macintosh) 8. In the Output tab, set “Choose a device for sound output” to “GS-10.” fig.11-700 9. In the Input tab, set “Choose a device for sound input” to “GS-10.” fig.11-710 The “Main Volume” slider will not move. Cautions when using the GS-10 Before you use your software, please no ...

  • Boss Audio Systems GS-10 - page 162

    162 Setting the Special Driver’s Functions Adjusting the audio latency When using the GS-10 in Advanced mode, you can change the driver settings to adjust the latency of the audio. To adjust the latency, change the Buffer Size in the driver settings dialog box. 1. As described in “Opening the special driver settings dialog box” ( p. 163), ope ...

  • Boss Audio Systems GS-10 - page 163

    163 Setting the Special Driver’s Functions Opening the special driver settings dialog box If using Windows: 1. Open the “Control Panel” and double-click “BOSS GS-10.” The “BOSS GS-10 Driver Settings” dialog box will appear. * In Windows XP, click “Switch to classic view” to switch the display to the classic view. BOSS GS- 10 will ...

  • Boss Audio Systems GS-10 - page 164

    164 Troubleshooting If there is no sound or other operational problems occur, first check through the following solutions. If this does not resolve the problem, then contact your dealer or a nearby Roland service station. Problems when using the GS-10 Problems with the sound No sound / volume too low ❏ Are the built-in speakers set to OFF? → Pr ...

  • Boss Audio Systems GS-10 - page 165

    165 Troubleshooting Other Problems Patch does not change ❏ Is something other than the Play screen shown in the display? → On the GS-10, patches can be selected only when the Play screen is displayed. Press [EXIT] to return to the Play screen (p. 15). Parameters specified with Assign can’t be controlled ❏ Could the effect be switched off? ? ...

  • Boss Audio Systems GS-10 - page 166

    166 Troubleshooting ❏ It has been found that in some cases, not all of the Windows 98 files required to support audio via USB are installed when a computer is shipped. → Please contact the manufacturer of your computer. ❏ Does your computer meet the USB specifications? → If you are using a computer that does not fulfill the electrical requi ...

  • Boss Audio Systems GS-10 - page 167

    167 Troubleshooting Device Manager shows “?”, “!”, or “USB Composite Device” The “Insert Disk” dialog box does not appear → Use the following procedure to re-install the driver. 1. Turn off the power of your computer, and start up Windows with all USB cables disconnected (except for keyboard and mouse). 2. After Windows restarts, ...

  • Boss Audio Systems GS-10 - page 168

    168 Troubleshooting ❏ Are you running multiple applications? → If multiple applications are running simultaneously, an error message may appear. If this occurs, click [OK] and exit the other applications. Even if an application window is closed, it is still running if it appears in the taskbar. Be sure to exit unneeded applications displayed. ? ...

  • Boss Audio Systems GS-10 - page 169

    169 Troubleshooting Interrupted notes or delays occur during MIDI playback ❏ Make Windows XP settings to enable background processing. → Make the following settings so that MIDI processing will occur smoothly. 1. Click the Windows start button, and from the menu that appears, select “Control Panel.” 2. In “Pick a category”, click “Per ...

  • Boss Audio Systems GS-10 - page 170

    170 Troubleshooting ❏ Is the GS-10 connected to a USB hub? → Try connecting the GS-10 directly to the USB connector of the Macintosh itself. ❏ Are you using a USB device other than the GS-10? → Try turning off the power of all USB audio devices other than the GS-10. → In some cases, you may also be able to solve this problem by grounding ...

  • Boss Audio Systems GS-10 - page 171

    171 Troubleshooting ❏ Does your computer satisfy the requirements of the USB standard? → If you are using a computer (such as a computer that you yourself assembled) that does not satisfy the electrical requirements of the USB specifications, you may experience interruptions in the audio. If this occurs, you may be able to solve the problem by ...

  • Boss Audio Systems GS-10 - page 172

    172 Troubleshooting Digitally recorded sound is distorted, is at the wrong pitch, or contains noise ❏ Is the application's sampling frequency set to 44.1 kHz? → Set the application's sampling frequency to 44.1 kHz. Playback or recording halts midway through, and then becomes impossible ❏ Was a heavy processing load experienced while ...

  • Boss Audio Systems GS-10 - page 173

    173 Troubleshooting Deleting the special driver If you were unable to install the special driver according to the procedure given, the GS-10 may not be recognized correctly by the computer. In this case, use the following procedure to delete the special driver, and then follow the procedure in “Installing & Setting Up the Driver” (Windows, ...

  • Boss Audio Systems GS-10 - page 174

    174 Index Numerics 2x2 Chorus ...................................................................... 45 A AC Adaptor .................................................................... 12 AC IN .............................................................................. 12 Advanced ................................................................ ...

  • Boss Audio Systems GS-10 - page 175

    175 Index K Knob Mode ..................................................................... 66 L LCD Contrast ................................................................. 65 LEVEL ................................................................. 10–11, 21 Level Meter .................................................................... 67 Lim ...

  • Boss Audio Systems GS-10 - page 176

    176 Index T TAP .................................................................................. 11 Tone Modify ................................................................... 37 TREBLE ..................................................................... 10, 21 Tremolo ......................................................................... ...

  • Boss Audio Systems GS-10 - page 177

    177 MEMO ...

  • Boss Audio Systems GS-10 - page 178

    178 For the USA DECLARATION OF CONFORMITY Compliance Information Statement Model Name : Type of Equipment : Responsible Party : Address : Telephone : GS-10 Guitar Effects System with USB Audio Interface Roland Corporation U.S. 5100 S.Eastern Avenue, Los Angeles, CA 90040-2938 (323) 890-3700 IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN AC ...

  • Boss Audio Systems GS-10 - page 179

    This product complies with the requirements of European Directive 89/336/EEC. For EU Countries For EU Countries Apparatus containing Lithium batteries ADVARSEL! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. VARNING Explo ...

  • Boss Audio Systems GS-10 - page 180

    Owner’s Manual 03342912 ‘03-8-1N Thank you, and congratulations on your choice of the BOSS GS-10 Guitar Effects System with USB Audio Interface. Before using this unit, carefully read the sections entitled: • USING THE UNIT SAFELY (page 2–3) • IMPORTANT NOTES (page 4–5) These sections provide important information concerning the proper ...

Fabbricante Boss Audio Systems Categoria Musical Instrument

I documenti che otteniamo dal fabbricante del dispositivoBoss Audio Systems GS-10 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Boss Audio Systems
- manuali per l’uso GS-10
- schede prodotto Boss Audio Systems
- opuscoli
- o etichette energetiche Boss Audio Systems GS-10
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Boss Audio Systems GS-10.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Boss Audio Systems GS-10, manuali di manutenzione, brevi manuali o manuali utente Boss Audio Systems GS-10. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Boss Audio Systems GS-10.

Manuali per l’uso simili

Manuale completo del dispositivo Boss Audio Systems GS-10, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Boss Audio Systems GS-10 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Boss Audio Systems GS-10.

Il manuale per l’uso completo Boss Audio Systems, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Boss Audio Systems GS-10 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Boss Audio Systems GS-10, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Boss Audio Systems GS-10 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Boss Audio Systems GS-10 - che ci dovrebbe aiutare nei primi passi durante l'uso Boss Audio Systems GS-10
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Boss Audio Systems GS-10
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Boss Audio Systems GS-10 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Boss Audio Systems GS-10?

Utilizza il modulo sottostante

Se non hai risolto il problema con Boss Audio Systems GS-10 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Boss Audio Systems GS-10 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)