Manuale per l’uso AMX NXC-M/ME/MPE

48 pagine 0.72 mb
Scarica

Vai alla pagina of 48

Summary
  • AMX NXC-M/ME/MPE - page 1

    instruction manual NetLinx Centr al Controllers and Cards NetLinx Master Cards and Modules NXM-MHS, NXC-M/ME/MPE ...

  • AMX NXC-M/ME/MPE - page 2

    AMX Limited W arranty and Disc laimer AMX Corporation warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX Corporation, with the following exceptions: • Electroluminescent and LCD Control Pane ls are warranted for three (3) years, e xcept for the display an ...

  • AMX NXC-M/ME/MPE - page 3

    T able of Contents i NetLinx Master Cards and Modules T able of Contents Product Information - NetLinx Modul es ................ ............................ ..................... 1 NXM-MHS (NXM Modules) ................................................... ............................................ 1 NXM-MHS spec ifications ....................... ...

  • AMX NXC-M/ME/MPE - page 4

    ii NetLinx Master Cards and Modules T able of Contents Programming .............. ................................ ................. ................ ................. .......... 21 Program Port Commands ...................................................... ......................................... 21 ESC Pass Codes ............................... ...

  • AMX NXC-M/ME/MPE - page 5

    T able of Contents iii NetLinx Master Cards and Modules Main Security Menu............................................................................................... .......... 36 Default Security Configuration ............................................... .......................................... 37 Security Help menu ....... ............. ...

  • AMX NXC-M/ME/MPE - page 6

    iv NetLinx Master Cards and Modules T able of Contents ...

  • AMX NXC-M/ME/MPE - page 7

    Product Information - NetLinx Modules 1 NetLinx Master Cards and Modules Pr oduct Inf ormation - NetLinx Modules NetLinx Master Cards and M odules are the contro llers for NetLinx Control Systems. Th e Master Cards can be installed in the Ne tLinx CardFrame (NXF), the NetLinx Integrated Controller (N XI), or a NetLinx Module (NXS-MHS) for stand-alo ...

  • AMX NXC-M/ME/MPE - page 8

    Product Information - NetLinx Modules 2 NetLinx Master Cards and Modules Progra m Port DIP switc h - baud rate settings The Program Port DIP switch is located at the front of the Master Cards. For Modules, you must remov e the front panel to access the DIP Switch. Use this DIP switch to set the baud rate for the Program Port, according to the setti ...

  • AMX NXC-M/ME/MPE - page 9

    Product Information - NetLinx Modules 3 NetLinx Master Cards and Modules DIP switch positions 3 and 4 are reserved for futu re features and should always be set to the Off (down) position. Progra m Port DIP switc h - Program Run Disab le (PRD) mode Y ou can also use the Program Port DIP switch to set the Master Card to Program Run Disable (PRD) mod ...

  • AMX NXC-M/ME/MPE - page 10

    Product Information - NetLinx Modules 4 NetLinx Master Cards and Modules Progra m P or t Connections/Wir ing Master Cards are equipped with two Program ports. On e is located on the front panel and the other is on the rear for easy access. The port on the front panel is a DB-9 (male) connector , and the rear port is a 5-pin (male) connector . Use a ...

  • AMX NXC-M/ME/MPE - page 11

    Product Information - NetLinx Modules 5 NetLinx Master Cards and Modules Modes and fr ont panel LED blink pattern s The following table lists the modes for the Master Cards/Modu les and blink patterns for the front panel LEDs for each mode. Rear panel LEDs: ICSNet/ICSHub Rear panel LEDs: AXLink Modes and LED Blin k Patt erns LEDs and Blink Patterns ...

  • AMX NXC-M/ME/MPE - page 12

    Product Information - NetLinx Modules 6 NetLinx Master Cards and Modules Rear panel LEDs: Ethe rnet (ME and MPE only) FIG. 3 Lay out of the Ether net LEDs (NXC-ME and NXC-MPE only) SPEED ETHERNET 10/100 FD A - Activity LED (yellow) blinks when receiving Ethernet da ta pack ets. L - Link LED ( green ) lights when the Ethernet cables are connected an ...

  • AMX NXC-M/ME/MPE - page 13

    NXC-M Master Card 7 NetLinx Master Cards and Modules NXC-M Master Car d Specifications NXC-M Master C ard Specifications P ower Requirements 260 mA @ 12 VDC Memory • Disk on chip (Non-volatile): 8 MB (upgradeab le to 32 MB) • SDRAM (V olatile): 16 MB • NVS (Non-volatile): 1 MB Front P anel Comp onents: Connector Program port - DB-9 (male) con ...

  • AMX NXC-M/ME/MPE - page 14

    NXC-M Master Card 8 NetLinx Master Cards and Modules Rear panel components FIG. 4 sho ws the rear panel compone nts of the NXM-M Master Card. Installing an (optional) NCP-E Ethernet Card The NXC-M Master Card has an ex pansion slot (p ort card connect or) that allows you to mount an NCP-E Ethernet port card as a daughter board. In stalling an NCP-E ...

  • AMX NXC-M/ME/MPE - page 15

    NXC-M Master Card 9 NetLinx Master Cards and Modules 3. Mount the NCP-E to the NXC-M, as shown in FIG. 7. a. Lower the rear edge (with the Ethernet connector and LEDs) of the NCP-E f irst. b. Alig n the connector with the opening in the rear plate. c. Lower the other end of the NCP-E, mating the connectors on both cards. 4. T ighten the four screws ...

  • AMX NXC-M/ME/MPE - page 16

    NXC-M Master Card 10 NetLinx Master Cards and Modules ...

  • AMX NXC-M/ME/MPE - page 17

    NXC-ME Master-Ethernet Card 11 NetLinx Master Cards and Modules NXC-ME Master -Ethernet Card The NXM-ME Master-Ethernet Card is a NetLinx Master Card with a 10/100 Base-T TCP/IP Ethernet connection. Specifications NXC-ME Specificat ions P ower Requirements 400 mA @ 12 VDC Memory • Disk on chip (Non-volatile): 8 MB (upgr adeable to 32 MB) • SDRA ...

  • AMX NXC-M/ME/MPE - page 18

    NXC-ME Master-Ethernet Card 12 NetLinx Master Cards and Modules Ethernet P orts used by the ME Rear panel components FIG. 8 sho ws the rear panel components of the NXC-ME Master -Ethernet Card. Ethernet P or ts used b y the ME P ort T ype Description Standard P or t # • ICSP Peer-to-peer prot ocol used f or both master-to-ma ster and master-to-de ...

  • AMX NXC-M/ME/MPE - page 19

    NXC-MPE Master P ort Expander Card 13 NetLinx Master Cards and Modules NXC-MPE Master P or t Expander Card The NXC-MPE Master Port Expander Card shares the features and functionality of the NXC-ME, but with an RJ-11 SPE (Server Port Expander) co nnector instead of a 4- pin AXlink connector . The SPE port allows you to use the NXC-MPE in conjunction ...

  • AMX NXC-M/ME/MPE - page 20

    NXC-MPE Master P or t Expander Card 14 NetLinx Master Cards and Modules Rear panel components FIG. 9 sho ws the rear panel components NXC-MPE Master Port Expander Card. SPE P or t Connection/Wiring Use an RJ-11 cable (6" max. length) to conn ect the NXC-MPE to an AXB-SPE Slav e Port Expander . The SPE OUT port on the rear panel of the NXC-M PE ...

  • AMX NXC-M/ME/MPE - page 21

    NXC-MPE Master P ort Expander Card 15 NetLinx Master Cards and Modules SPE Cable pinout inf ormation The following table gi ves pinout information for the RJ-11 SPE connector . AMX suppli es the RJ- 11 cable with the AXB-SPE. The EXP ANSION connectors (on the AXB-SPE) use pins 2, 3, 4 and 5. Pin 2 is Ground; the others are all pin-to-pin connection ...

  • AMX NXC-M/ME/MPE - page 22

    NXC-MPE Master P or t Expander Card 16 NetLinx Master Cards and Modules ...

  • AMX NXC-M/ME/MPE - page 23

    Installation and Wiring 17 NetLinx Master Cards and Modules Installation and Wiring This section contains information about installing the NetLinx Modules and Master Cards, wiring diagrams, and pinouts for assembling cables. Mounting the Modules Into an Equipment Rac k T o install the NXS-MHS Modules in an equipm ent rack, you'll need an optio ...

  • AMX NXC-M/ME/MPE - page 24

    Installation and Wiring 18 NetLinx Master Cards and Modules 6. Inside the Master Card slot on the NXF or NXI, find the 6-pin control cable connector . 7. Plug the connector from the NXF or NXI into the 6-pin terminal on the Master Card. This connector is ke yed to ensure correct orientatio n. 8. Once the control cable is connected, gently slide th ...

  • AMX NXC-M/ME/MPE - page 25

    Installation and Wiring 19 NetLinx Master Cards and Modules ICSHub RJ-45 Connections/Wiring The two ICSHub RJ-45 connectors on the rear of the Master Card pr ovide data to other Hubs connected to a downstream system. Hubs allow you to connect multiple NetLinx Hubs together in a daisy-chain configuration. Conn ect the OUT port to the IN por t on the ...

  • AMX NXC-M/ME/MPE - page 26

    Installation and Wiring 20 NetLinx Master Cards and Modules Replacing the Lithium Batteries The Master Cards are equipped with two lithium ba tteries that hav e a life of approximately 5 years to protect their memory . When DC power is on, the batteries are not used. When replacing the batteries, remove one at a time to avoid losing the program in ...

  • AMX NXC-M/ME/MPE - page 27

    Programming 21 NetLinx Master Cards and Modules Pr ogramming The NetLinx programming language allows numbers in the range 0-32,767. Device 0 refers to the Master Card, and numbers greater than 32,767 are reserved for internal use only . The NetLinx programming language requires a Device:Port:Syste m (D:P:S ) syntax where Axcess expects only a de vi ...

  • AMX NXC-M/ME/MPE - page 28

    Programming 22 NetLinx Master Cards and Modules Progra m Port Commands (Cont.) Command Description MSG ON or MSG OFF MSG On sets the ter minal program to display all messages generated b y the Master Card. MSG OFF disables the display . OFF T ur ns off a channel on a device. The de vice can b e on any system the master you are connected to can reac ...

  • AMX NXC-M/ME/MPE - page 29

    Programming 23 NetLinx Master Cards and Modules Progra m Port Commands (Cont.) SET TIME Prompts you to enter the new time f or the Master C ard. When the time is set on the Master Card, the new time will be reflected on all devices in the system that have cloc ks (i.e. touch panels). By the same token, if y ou set the time on any system device, the ...

  • AMX NXC-M/ME/MPE - page 30

    Programming 24 NetLinx Master Cards and Modules ESC P ass Codes There are 'escape' codes in the pass mode. These c odes can switch the display mode or exit the pass mode. The following 'escape' codes are def ined. Notes on specific T e lnet/T erminal clients T e lnet and terminal clients wi ll hav e different behaviors in some s ...

  • AMX NXC-M/ME/MPE - page 31

    NetLinx Security 25 NetLinx Master Cards and Modules NetLinx Security NetLinx Masters (version 2.10.80 or later) hav e built-in security capabilities. It will requi re a v alid user name and password to access the NetLin x System’ s T elnet, HTTP and FTP servers. The security capabilities are co nf igured and appli ed via a T eln et connection or ...

  • AMX NXC-M/ME/MPE - page 32

    NetLinx Security 26 NetLinx Master Cards and Modules User Name A user name is a v alid character string (4 - 20 alpha-numeric char acters) defining the user . This string is case sensitive . Each user name must be unique. Group Na me A group name is a valid character string (4 - 20 alpha-numeric characters) defining the group. Thi s string is case ...

  • AMX NXC-M/ME/MPE - page 33

    NetLinx Security 27 NetLinx Master Cards and Modules When you are prompted to enter the path for a Directory Asso ciation, the NetLinx mas ter will attempt to validate the path. If the directory or file is not v alid (i.e. it does not exist at the time you entered the path), the NetLinx master will ask y ou whether you were intending to grant acces ...

  • AMX NXC-M/ME/MPE - page 34

    NetLinx Security 28 NetLinx Master Cards and Modules 11) Set Telnet Timeout in seconds 12) Display Telnet Timeout in seconds 13) Make changes permanent by saving to flash Or <ENTER> to return to previous menu Security Setup -> 3. The Main Security Menu sho ws a list of choices and a prompt. T o select one of the listed choices, simply ente ...

  • AMX NXC-M/ME/MPE - page 35

    NetLinx Security 29 NetLinx Master Cards and Modules The selection listed will display wh at the current settings. T o change an option, select the number listed next to the option. For e xample, if selection 2) is selected, HTTP Secu rity will be disabled. The menu will then be displayed again as follows: Select to change current security option 1 ...

  • AMX NXC-M/ME/MPE - page 36

    NetLinx Security 30 NetLinx Master Cards and Modules 2. At the Enter user name prompt, enter a ne w user name (for example " Bilbo "). A user name is a v alid character string (4 - 20 alpha-numeric characters) defining the user . This string is case sensitive . Each user name must be unique. 3. Press <ENTER> to enter the new user na ...

  • AMX NXC-M/ME/MPE - page 37

    NetLinx Security 31 NetLinx Master Cards and Modules Access Rights Menu The Access Rights Menu is accessed whenev er you select Change Access Rights from the Edit User Menu, or Change Access Rights from the Edit Group Menu. The Access Rights Menu is displayed as follows: Select to change current access right 1) Terminal (RS232) Access.............. ...

  • AMX NXC-M/ME/MPE - page 38

    NetLinx Security 32 NetLinx Master Cards and Modules 5) Delete user 1. T ype 5 and <ENTER > at the Security Setup prompt (at the bottom of the Main Securit y Menu) to delete an exis ting user account. A sample session response is: Select from the following list of enrolled users: 1) Fred 2) Betty 3) Bilbo Select User -> 2. Select the user ...

  • AMX NXC-M/ME/MPE - page 39

    NetLinx Security 33 NetLinx Master Cards and Modules Edit Group Men u: Add directory association 1. At the Edit Group prompt, type 1 to add a new directory asso ciation. A sample session response is: There are currently no directories associated with this account New directory: A Directory Association is a path that def ines the directories and/or ...

  • AMX NXC-M/ME/MPE - page 40

    NetLinx Security 34 NetLinx Master Cards and Modules Edit Group men u: List directory associations 1. At the Edit Group prompt, type 3 to list all existing directory associations. A sam ple session response is: The following directory associations are enrolled: /directory1/* /directory2/* Press <ENTER> key to continue 2. Press <ENTER> t ...

  • AMX NXC-M/ME/MPE - page 41

    NetLinx Security 35 NetLinx Master Cards and Modules 1) Add directory association 2) Delete directory association 3) List directory associations 4) Change Access rights 5) Display Access Rights This menu is described o n the previous pages (see Edit Gr oup Menu on page 32) . 9) Delete G roup 1. T ype 9 and <ENTER> at the Security Setup prompt ...

  • AMX NXC-M/ME/MPE - page 42

    NetLinx Security 36 NetLinx Master Cards and Modules Main Security Menu The Main Securi ty menu is descri bed belo w: Main Securit y Menu Command Description 1) Set system security options for NetLinx master This selection will bring up the Secu rity Options Menu that allows you to change the security options f or the NetLinx master (refer to the S ...

  • AMX NXC-M/ME/MPE - page 43

    NetLinx Security 37 NetLinx Master Cards and Modules Default Security Configuration By default, the NetLinx master will create th e follo wing accounts, access rights, directory associations, and security options. Account 1: User Name: administrator Password: password Group: administrator Rights: All Directory Association: /* Account 2: User Name: ...

  • AMX NXC-M/ME/MPE - page 44

    NetLinx Security 38 NetLinx Master Cards and Modules Security Help menu T ype help at the prompt in the T el net session to display the following help topics: Security Help Menu Options Command Description ----- Help ----- <D:P:S> (Extended diag messag es are OFF) <D:P:S> : Device:P or t:System. If omitted, assumes mast er . ? or Help D ...

  • AMX NXC-M/ME/MPE - page 45

    NetLinx Security 39 NetLinx Master Cards and Modules Logging Into a Session Until T elnet security is enabled, a session will begin with a welcome banner . Welcome to NetLinx v2.10.80 Copyright AMX Corp. 1999-2002 > When T elnet security is enabled (or T erminal security for a term in al session), the user will be prompted for a user name and pa ...

  • AMX NXC-M/ME/MPE - page 46

    NetLinx Security 40 NetLinx Master Cards and Modules least 4 characters long an d no more than 20 characters. Any co mbination of letters, numbers, or other characters may be used. After the password is entered, if the password is correct you will s ee a welcome banner as shown below: Login: User1 Password: ***** Welcome to NetLinx v2.10.80 Copyrig ...

  • AMX NXC-M/ME/MPE - page 47

    Programming 41 NetLinx Master Cards and Modules ...

  • AMX NXC-M/ME/MPE - page 48

    AMX reserves the right to alter specif ications with out noti ce at any time. brussels • dallas • los ang eles • mexico city • philad elphia • shanghai • singapor e • tampa • toronto* • yo rk 3000 research drive, richardson, TX 75082 USA • 469.624.8000 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 060- ...

Fabbricante AMX Categoria Drums

I documenti che otteniamo dal fabbricante del dispositivoAMX NXC-M/ME/MPE possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici AMX
- manuali per l’uso NXC-M/ME/MPE
- schede prodotto AMX
- opuscoli
- o etichette energetiche AMX NXC-M/ME/MPE
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso AMX NXC-M/ME/MPE.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione AMX NXC-M/ME/MPE, manuali di manutenzione, brevi manuali o manuali utente AMX NXC-M/ME/MPE. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto AMX NXC-M/ME/MPE.

Manuali per l’uso simili

Manuale completo del dispositivo AMX NXC-M/ME/MPE, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare AMX NXC-M/ME/MPE dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti AMX NXC-M/ME/MPE.

Il manuale per l’uso completo AMX, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale AMX NXC-M/ME/MPE - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice AMX NXC-M/ME/MPE, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per AMX NXC-M/ME/MPE che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo AMX NXC-M/ME/MPE - che ci dovrebbe aiutare nei primi passi durante l'uso AMX NXC-M/ME/MPE
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del AMX NXC-M/ME/MPE
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio AMX NXC-M/ME/MPE in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su AMX NXC-M/ME/MPE?

Utilizza il modulo sottostante

Se non hai risolto il problema con AMX NXC-M/ME/MPE con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con AMX NXC-M/ME/MPE è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)