-
Casio IT-3000 - page 1
Handheld Printer Terminal User’s Guide Series Be sure to read “Safety Precautions” inside this guide before trying to use your Handheld Printer Terminal. After reading this guide, keep it in a safe place for future reference. E PN410385-007 IT-3000_E_Hyo_1_4.p65 07.10.3, 5:33 PM 3 ...
-
Casio IT-3000 - page 2
• This Product is equipped with the Brycen B-RAPPORE Stack and My W irefree Network Bluetooth User Interface Application, the use of which is gov erned by a license granted by Brycen Co., Ltd. ® • BLUETOO TH is a registered trademark owned by Bluetooth SIG, Inc. and licensed to CASIO COMPUTER CO., L TD. • Microsoft and W indo ws are either r ...
-
Casio IT-3000 - page 3
E-1 W arning Caution Danger Congratulations upon your selection of this CASIO product. Be sure to read the following Safety Precautions before trying to use it for the first time. Markings and Symbols The following are the meanings of the markings and symbols used in these Safety Precautions. This symbol indicates information that, if ignored or ap ...
-
Casio IT-3000 - page 4
E-2 Safety Precautions W arning Foreign Objects • Should any foreign matter get into the Handheld Printer T erminal and its options, immediately turn off the po wer and contact your original vendor or an authorized CASIO service provider . Continued use creates the danger of fire and electric shock. Dropping and Damage • Should you drop the Han ...
-
Casio IT-3000 - page 5
E-3 Operation of Wireless Data Comm unication Function W ar ning Interference with the Operation of Other Equipment (Using Wireless Data Comm unication Function) • Please follow the instructions provided by health care facilities when using your Handheld Printer T erminal in hospitals or other locations where medical equipment is in use. In parti ...
-
Casio IT-3000 - page 6
E-4 Safety Precautions Caution Foreign Objects • T ake care to ensure that metals or comb ustible objects are not inserted into the openings of the Handheld Printer T erminal and its options. Such objects inside of the Handheld Printer T erminal and its options create the danger of fire and electric shock. Location • Do not locate the Handheld ...
-
Casio IT-3000 - page 7
E-5 Lithium-ion Battery Pack Danger • Nev er allo w the battery pack to become wet. W ater can create the danger of battery pack heat emission, explosion, and f ire. • Nev er use or lea ve the batter y pack next to open flame, near a sto ve, or an y other area exposed to high heat. Doing so creates the danger of battery pack heat emission, expl ...
-
Casio IT-3000 - page 8
E-6 Safety Precautions W arning • Nev er place the battery pack in a micro wa v e ov en or any other high-v oltage device. Doing so cr eates the danger of battery pack heat emission, explosion, and f ire. • Should the battery pack emit a strange odor or heat, change color or shape, or exhibit an y other abnormal beha vior , immediately stop usi ...
-
Casio IT-3000 - page 9
E-7 AC Power Supply W arning • Do not use the Handheld Printer T erminal at a voltage other than the specified v oltage. Also, do not connect the Handheld Pr inter T erminal to a multi-plug power strip. Doing so creates the danger of fire and electric shock. • A void conditions that can cause damage or breaks in the po wer cord. Do not place he ...
-
Casio IT-3000 - page 10
E-8 A C Adaptor Caution • The housing of the AC adaptor can become w arm during normal use. • T ake normal precautions against electric shock. • At least once a year , unplug the A C adaptor from the wall outlet and clean any dust that builds up between the prongs of the plug. Dust built up between the prongs can lead to the danger of fire. B ...
-
Casio IT-3000 - page 11
E-9 Y our Handheld Printer T erminal and its options are precision digital instruments. Improper operation or rough handling can cause problems with data storage and other problems. Note and observe the following precautions to ensure proper operation. • Do not continue operating the Handheld Printer T erminal when battery power is low . Doing so ...
-
Casio IT-3000 - page 12
E-10 • The contents of this guide are subject to change without notice. • Note that CASIO COMPUTER CO., L TD. shall not be held liable to you or any third parties for any losses or damages arising from the use of this guide. • Although the utmost care has been taken in preparing this manual, please contact the manufacturer if you should happe ...
-
Casio IT-3000 - page 13
E-11 GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not applicable to other areas). NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resident ...
-
Casio IT-3000 - page 14
E-12 Regulatory Information L ’utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) I’utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. ...
-
Casio IT-3000 - page 15
E-13 Products are for distribution within all member states of the EU. France limited to 2446.5-2483.5 Mhz Indoor use. Belgium limited to 2400-2483.5 Mhz Indoor , 2460-2483.5 Mhz Outdoor use. The information described abov e dates from January 2003 and may be subjected to future changes. Standard lssue date EN 300 328 v1.7.1: 2006.10 and therefore ...
-
Casio IT-3000 - page 16
E-14 Contents Safety Precautions ......................................................................................... E-1 Operating Precautions ................................................................................... E-9 Important ....................................................................................................... ...
-
Casio IT-3000 - page 17
E-15 General Guide ................................................................................................... E-54 Connecting the AC Adaptor and Connecting to a Computer ............................ E-56 Configuring DIP Switch Settings ..................................................................... E-58 Connecting Multiple Bridge Sat ...
-
Casio IT-3000 - page 18
E-16 Be sure to perform the following steps before trying to use the Handheld Printer T erminal for the first time. 1. When unpacking, make sure that everything is included. Open the box and make sure that all the items shown here are included. 2. Charge the battery pack. Use the AC Adaptor (AD-S10095AE/A U), Cr adle-type Battery Charger or Bridge ...
-
Casio IT-3000 - page 19
E-17 3. Load the battery pack into the Handheld Printer T erminal. 1 T urn the battery pack co ver lock switch on the side of the Handheld Printer T erminal to the “FREE” position. 2 Open the battery pack cov er . 3 Install the battery pack(DT -9723LIC). Push it all way to the end inside the compartment until the eject button at the front of th ...
-
Casio IT-3000 - page 20
E-18 4. Hold down the power key for about one second to turn on the po wer . Start up the application you want to run. Before Getting Started IT-3000_E_P16_32.p65 07.10.3, 5:36 PM 18 ...
-
Casio IT-3000 - page 21
E-19 Options IT -3000 Series Required A C Adaptor f or Bridge Satellite Cradle / Cradle-type Battery Charger Cradle-type Battery Charger HA-B30CHG HA-B61IO Bridge Satellite Cradle Handheld Printer T erminal System Configuration AD-S42120BE IT-3000_E_P16_32.p65 07.10.3, 5:36 PM 19 ...
-
Casio IT-3000 - page 22
E-20 Handheld Priter T erminal System Configuration Battery Pac k DT -9723LIC Formed Sheet Paper Holder HA-B93PH Splash Protect Cover HA-B92PCV Screen Protect Co ver HA-B90DCV IT-3000_E_P16_32.p65 07.10.3, 5:36 PM 20 ...
-
Casio IT-3000 - page 23
E-21 A C Adaptor AD-S10095AE AD-S10095A U * See page 66. IT-3000_E_P16_32.p65 07.10.16, 15:12 21 ...
-
Casio IT-3000 - page 24
E-22 Cables DT-887AXA Dsub 9-Pin (Female) RS-232C Cross Cable for Bridge Satellite Cradle DT-888RSC RS-422 Modular Cable for connecting Bridge Satellite Cradle DT-380USB USB Cable for connecting Bridge Satellite Cradle and PC HA-B80AX RS-232C Cross Cable for connecting Handheld Printer Terminal and PC Handheld Priter T erminal System Configuration ...
-
Casio IT-3000 - page 25
E-23 General Guide 25 3 4 5 6 7 8 9 10 1 2 24 11 12 13 14 15 16 17 18 23 19 20 18 21 22 IT -3000M53E/M54E2/M55E/M55U/M56E/M56U * The C-MOS Imager is only installed on the IT -3000M55E/ M55U/M56E/M56U * Magnetic Card Reader is only installed on the IT -3000M54E2/ M55E/M55U IT-3000_E_P16_32.p65 07.10.3, 5:36 PM 23 ...
-
Casio IT-3000 - page 26
E-24 General Guide 1 SD Memory Card Slot 2 Program Key (L) 3 Roll Paper Holder 4 Splash Protect Cov er and Paper Cutter 5 Power K ey 6 Indicator 1 (Left Side) Indicator 2 (Right Side) 7 Speaker 8 Brightness Sensor 9 LCD Panel/T ouch Screen 10 Stroke K eys 11 RS-232C Interface Connector (IT -3000M53E/ M54E2) 12 Program K ey (R) 13 Po wer Jack 14 IR ...
-
Casio IT-3000 - page 27
E-25 15 Battery Pack Cover Lock Switch 16 Battery Pack Cover 17 PC Card Slot 18 Hand Strap Hook 19 14-pin Serial Interface Connector 20 Power T erminals 21 Neck Strap Hooks 22 Magnetic Card Reader (IT -3000M54E2/ M55E/M55U) 23 Reset Switch 24 Screen Protect Cover Mounting 25 C-MOS Imager (IT -3000M55 E/ M55U/M56E/ M56U only) T urn this switch when ...
-
Casio IT-3000 - page 28
E-26 1 Fn Key 2 Numeric Keys 3 (Cursor Key) 4 (Cursor Key) 5- 6. 7C 8B S 9 ENT This key is used to switch the character input mode or make various settings in combination with other keys, or start up a pre-registered application. These keys are used to input numbers and letters. Moves the cursor to the left. Mov es the cursor to the right. This is ...
-
Casio IT-3000 - page 29
E-27 Replacing the Battery Y our Handheld Printer T erminal uses two types of battery: a battery pack and a memory backup battery . A battery pack (DT -9723LIC) is used for the main battery . A backup battery is housed inside the Handheld Printer T erminal. This guide uses the follo wing terms to ref er to the batteries. Battery Pack: Rechargeable ...
-
Casio IT-3000 - page 30
E-28 Replacing the Battery T o replace the battery pack 1. Make sure that the Handheld Printer T erminal is turned off. If the power is on, press the po wer k ey to turn it of f. 2. T urn the battery pack cov er lock switch on the side of the Handheld Printer T erminal to the “FREE” position. 3. Open the battery pack cov er . 4. Remove the batt ...
-
Casio IT-3000 - page 31
E-29 Important! • When replacing the battery pack, make sur e y ou do not lea ve the Handheld Printer T erminal without a battery pack for mor e than about 10 minutes. Doing so can cause data in the memory to be deleted. • Never try to use other type of ba ttery than the one that is specif ied for this product. 6. Return the battery pack cover ...
-
Casio IT-3000 - page 32
E-30 A flexible hand strap can be attached to the Handheld Printer T erminal. Hook A Hand Strap Hook B Attach the hand strap follo wing the procedure described below . 1. Attach Hook B of the hand strap to the hand strap hook located on the bottom of the Handheld Printer T erminal. 2. Pull on the hand strap in the direction shown in the illustratio ...
-
Casio IT-3000 - page 33
E-31 A neck strap can be attached to the Handheld Printer T erminal to keep it from being dropped while being carried. The stylus holder provided can also be attached. Attach the neck strap following the procedure described below . Attachment Pr ocedure 1. Pull out the neck strap mounting hooks out of each silo on the bottom of the Handheld Printer ...
-
Casio IT-3000 - page 34
E-32 Remov al Pr ocedure 1. Pull back the locking bar of the neck strap mounting hook and then release the hook from each ring as shown in the illustration. 2. Follo wing the attachment procedure in re verse way , remove the neck strap rings from each neck strap mounting hook on the Handheld Printer T erminal and then push back the neck strap mount ...
-
Casio IT-3000 - page 35
E-33 2. Remove Mounting Hook C. 3. Pass the stylus holder through the strap as sho wn in the illustration. 4. Fold back the strap after passing through Bracket C, and then fasten in the same way it was originally f astened with Bracket A and Bracket B. • Do not pass the strap through the stylus holder when folding it back. • Place the stylus in ...
-
Casio IT-3000 - page 36
E-34 Calibrating T ouch Screen Alignment Whenever you feel that touch screen response is poor or that the operations being executed do not match the location you are tapping on the touch screen, perform the following operations to calibrate the alignment of the touch screen. • Press the “Fn” key and then press the “4” key after confirming ...
-
Casio IT-3000 - page 37
E-35 Adjusting Display Contrast Perform the following steps to adjust display contrast to make display colors more vivid and easier to see. • Press the “Fn” key and then press the “2” key or “3” key after confirming that “F” is displayed in the lower right corner of the screen. Pressing the “2” key adjusts for more contrast, w ...
-
Casio IT-3000 - page 38
E-36 The printer can print on roll paper (80 mm or 58 mm wide) or 80 mm wide formed sheet paper . When printing on for med sheet paper , use the paper holder (HA-B93PH) sold separately . When Using Roll Paper Installing the Roll Paper 1. Check that the power is of f. If the po wer is on, always mak e sure to turn it of f by pressing the power k ey ...
-
Casio IT-3000 - page 39
E-37 5. Close the roll paper holder , slide the lock knobs on the left and right sides as shown in the illustration to align at the “LOCK” position to lock the roll paper holder in position, and then tear of f the protruding roll paper . • Please note that the positions of the lock knobs on the left and right sides are different. 6. Close the ...
-
Casio IT-3000 - page 40
E-38 Attaching the 58 mm P aper Width Adjuster Attach the 58 mm Paper Width Adjuster inside the roll paper holder when using 58 mm wide roll paper . Refer to the procedure described in “Installing the Roll Paper” for information on opening and closing the roll paper holder . 1. Remove the 80 mm P aper W idth Adjuster as shown in the illustratio ...
-
Casio IT-3000 - page 41
E-39 When Using Formed Sheet P aper Attaching the Paper Holder Attach the separately sold Paper Holder (HA-B93PH) when printing on formed sheet paper . The Paper Holder is composed of four parts and four scre ws. In addition, a PC card cushion is enclosed to pre vent the PC card from being dislodged by an impact and so forth. Use this card as neces ...
-
Casio IT-3000 - page 42
E-40 5. Loosen the two screws shown in the illustration (the screws cannot be removed). 6. Open the cover (PC card slot cover) as shown in the illustration. 7. Loosen and remove the four screws shown in the illustration. Store the removed screws in a safe place so that they do not become lost. 8. T urn the Handheld Printer T erminal back ov er . 9. ...
-
Casio IT-3000 - page 43
E-41 10. Fasten P art A of the Paper Holder to the Handheld Printer T erminal. Press both ends of Part A to fasten to the Handheld Printer T erminal. 11 . Insert the projections on both sides of Part into the grooves of Part B and fasten to the Handheld Printer T erminal with the four screws for the Paper Holder . 12 . While spreading apart both en ...
-
Casio IT-3000 - page 44
E-42 Loading Formed Sheet Paper Enable the Auto Loading function by selecting Start, Settings, Control Panel and then “Printing Control” of Printer Settings in that order before loading the formed sheet paper . 1. Insert the formed sheet paper all the way into the printer until it stops with the side to be printed facing downward. The paper wil ...
-
Casio IT-3000 - page 45
E-43 Precautions When Using Printer Printing Accuracy 1. During high-duty printing such as printing horizontal lines or printing while the battery remaining capacity is lo w , the printing speed may slow down to pre vent excess current consumption that may cause unaligned printing f or one dot or more. 2. Line change errors may occur if the printin ...
-
Casio IT-3000 - page 46
E-44 Others 1. The temperature range f or printing with 2-ply paper and label paper is 5 to 35°C. 2. Once the end mark of the paper appears, promptly r eplace with new paper . 3. Recommended paper: Use only specified papers by CASIO. 4. Paper scraps may accumulate and printing quality may decrease when the printer has been used f or a long period ...
-
Casio IT-3000 - page 47
E-45 Using the C-MOS Imager (IT -3000M55E/IT -3000M55U/IT -3000M56E/IT -3000M56U only) 1. T urn on the Handheld Printer T erminal, position its C-MOS Imager reader port near the bar code or 2D code, and then press the T r igger K e y (R or L). 2. The Handheld Printer T erminal reads the code by emitting laser and red lights. Indicator 2 (read opera ...
-
Casio IT-3000 - page 48
E-46 W arning Label • This label is a warning label f or Class 2 laser pr oducts that comply with IEC60825-1+A2:2001 CA UTION • Use of controls or adjustments or perf ormance of pr ocedur es other than those specified her ein may r esult in hazardous radiation exposur e. • The laser light emitted by the C-MOS Imager has a maximum output of le ...
-
Casio IT-3000 - page 49
E-47 The Magnetic Card Reader comes as standard with IT -3000M55E/M55U/M54E2. Only use cards that are compatible with the ISO standards. The procedure for reading cards is described belo w . 1. Remove the cover as shown in the illustration. 2. Insert the card all the way into the reader as shown in the illustration, and steadily pass the card throu ...
-
Casio IT-3000 - page 50
E-48 IR Communication IR communication can be used to transfer data between two Handheld Printer T erminals. When performing IR communication, orient the IR ports of both Handheld Printer T erminals so the y are pointing directly at each other . Data communication is possible within a distance of 0 (in direct contact) to 1 m (max. 20 cm at 4 Mbps). ...
-
Casio IT-3000 - page 51
E-49 Bluetooth ® Comm unication Bluetooth ® protocol can also be used to transfer data between two Handheld Printer T erminals. The two Handheld Printer T erminals should be no more than five meters apart (as long as there is nothing blocking the path in between). Important! Observe the f ollo wing precautions to help ensur e that data communicat ...
-
Casio IT-3000 - page 52
E-50 Resetting the Handheld Printer T erminal is the same as restarting a computer . Performing a reset causes all unsaved inputs and edits to be lost, but data that is already stored in the memory as well as all settings should be unaf fected. Use reset to restore normal operation whene v er the Handheld Printer T e rminal operates abnormally due ...
-
Casio IT-3000 - page 53
E-51 Performing a Full Reset (Initialization) Performing a full reset initializes memory . This means that all data stored in the memory (RAM) is deleted and all the settings are returned to their initial factory settings. Perform a full reset whenever any one of the following conditions exists. • When you want to delete all memory contents and r ...
-
Casio IT-3000 - page 54
E-52 1. T erminal Model: IT -3000M53E, IT -3000M55E, IT -3000M55U, IT -3000M54E2, IT -3000M56E, IT -3000M56U CPU: Marvell ® PXA255 Application Processor (400 MHz max.) Memory: 64MB RAM, 64MB R OM (user def ined: Approx. 30MB) OS: Microsoft ® W indo ws ® CE .NET operating system (English V ersion) Display: 3.5-inch, 240 × 320 dots, 2-W ay TFT Co ...
-
Casio IT-3000 - page 55
E-53 Character Size: Free double-width characters Generating Method : Black/white in version, mix ed character font printing 8. Card Slot PC Card Slot: PC Card T ype I/T ype II (3.3 V/5.0 V specifications) * W ake on function av ailable SD Memory Card Slot: SD Memory Card 9. Magnetic Card Reader : ISO 7811 T racks, 1, 2, and 3 (IT -3000M54E2/M55E/M ...
-
Casio IT-3000 - page 56
E-54 Back Bottom Right To p F ront The optionally av ailable Bridge Satellite Cradle (HA-B61IO) mak es it possible to transfer system data and file data between the Handheld Printer T erminal and a computer using an RS-232C interface or USB interface . Y ou can also use the Bridge Satellite Cradle to charge the battery pack installed on the Handhel ...
-
Casio IT-3000 - page 57
E-55 1 System Status Indicator Lamp 2 Communication Indicator Lamp 3 Pow er Indicator Lamp 4 T erminal Detect Switches 5 IR Port 6 Power Contacts 7 Pow er Switch 8 AC Adaptor Jack 9 RS-422 Port 10 RS-232C Port 11 USB Port 12 DIP Switches This lamp indicates whether the system is operating normally . This lamp indicates the system status and whether ...
-
Casio IT-3000 - page 58
E-56 Using the Bridge Satellite Cradle (HA-B61IO) Connecting the AC Adaptor and Connecting to a Computer Use the AC adaptor a v ailable as an option for the Bridge Satellite Cradle to supply the po wer to it. Always make sure that the po wer is being supplied to the Bridge Satellite Cradle by the AC adaptor before performing an y type of data commu ...
-
Casio IT-3000 - page 59
E-57 4. T urn on the po wer . This causes the Bridge Satellite Cradle po wer indicator lamp to light red. 5. Place the Handheld Printer T erminal so that the infrared communication unit on the right side is faced f irmly with the infrared communication unit of the Bridge Satellite Cradle. • If the system is operating normally and data communicati ...
-
Casio IT-3000 - page 60
E-58 Using the Bridge Satellite Cradle (HA-B61IO) Configuring DIP Switch Settings Removing the bottom co ver of the Bridge Satellite Cradle e xposes the DIP switches. Y ou can change the ON/OFF settings of the DIP switches to set the conf iguration. Only set the DIP switches after first switching OFF the po wer. 123 45678 Not used (Alwa ys off) Not ...
-
Casio IT-3000 - page 61
E-59 Connecting Multiple Bridge Satellite Cradles (HA-B61IO) Connect “C-OUT” of the Bridge Satellite Cradle connected to the host computer to “C-IN” of the next Bridge Satellite Cradle you want to connect. Important! Y ou can use the optional RS-422 modular cables (DT -888RSC) to link up to eight Bridge Satellite Cradles. RS-422 modular cab ...
-
Casio IT-3000 - page 62
E-60 Model no. of ACAdaptor Area/Region Compliance AD-S42120BE All except China Compliant with CE, UL, FCC, and Energy Ef ficienc y Standards. AD-S42120BE-CN China only Compliant with Ener gy Ef ficienc y Standards and CCC. Bridge Satellite Cradle (HA-B61IO) Specifications 1. IR Data Communication Interface: IR interface Protocol: IrD A V er . 1.1 ...
-
Casio IT-3000 - page 63
E-61 The optionally av ailable Cradle-type Battery Char ger (HA-B30CHG) lets you charge the Handheld Printer T erminal’ s battery simply by placing the Handheld Printer T erminal onto the charger . General Guide To p F ront Bottom Right Back Using the Cradle-type Battery Char g er (HA-B30CHG) IT-3000_E_P54_77.p65 07.10.3, 5:39 PM 61 ...
-
Casio IT-3000 - page 64
E-62 Using the Cradle-type Battery Charger (HA-B30CHG) 1 Power Indicator Lamp 2 T erminal Detect Switches 3 P o wer Contacts 4 Power Switch 5 AC Adaptor Jack This lamp indicates the po wer status and the mounting status of the Handheld Printer T erminal. Off: Po wer of f Red: Power on, Handheld Printer T erminal not mounted Green: Power on, Handhel ...
-
Casio IT-3000 - page 65
E-63 Connecting the A C Adaptor f or the Cradle-type Battery Char ger Use the dedicated A C adaptor for the Cradle-type Ba ttery Char ger to connect to a w all outlet. 1. After making sure that the Cradle-type Battery Charger po wer switch is turned of f, plug the AC adaptor into the A C adaptor jack on the back of the charger . 2. Next, after conn ...
-
Casio IT-3000 - page 66
E-64 Cradle-type Battery Charger (HA-B30CHG) Specifications 1. Charging Charging System: Fix ed-voltage (with current limiter) Charge T ime: Approximately 8.0 hours 2. Po wer Supply Power Requirement: A C adaptor (AD-S42120BE*) Power Consumption: 12V DC, approximately 2,100mA Output to Handheld Printer T erminal : 10V DC 1,800mA (max.) 3. A C Adapt ...
-
Casio IT-3000 - page 67
E-65 1. T urn of f the power of the Handheld Printer T erminal by pressing the power key . 2. Open the jack cover ( ), and then insert the plug of the AC Adapter into the charging jack ( ). After connecting the po wer cable to the A C adaptor , plug the other end of it into an electrical outlet. 3. Charging begins and Indicator 1 on the Handheld Pr ...
-
Casio IT-3000 - page 68
E-66 Specifications 1. Charging Specif ication Charging Method: Constant current/voltage Charge Period: Approx. 8 hours (with the power of f) 2. A C Adaptor Model: AD-S10095A Input: 100V to 240V AC 50/60 Hz 0.4A Output: 9.5V DC 1A 9.5W 3. Dimensions and W eight Dimensions: Approximately 78(W) × 50(D) × 30(H) mm (3 1 ⁄ 16 "W × 1 15 ⁄ 16 ...
-
Casio IT-3000 - page 69
E-67 PC card compatible with the PCMIA(T ype I/II) standard can be installed in the PC Card slot on the Handheld Printer T erminal. Insert a PC card according to the procedure described belo w . Attachment of PC Car d Remo v al T ape to a PC Card There are some PC cards that may be dif ficult to remo ve from the PC card slot once they ha ve been in ...
-
Casio IT-3000 - page 70
E-68 Using PC Cards 4. Open the cover (PC card slot co v er) as shown in the illustration. 5. Insert a PC card having PC card remov al tape attached. Insert the PC card all the way in with the top of the card facing to wards the top of the Handheld Printer T erminal. Fold up the end of the PC card remo v al tape so that it does not get caught in th ...
-
Casio IT-3000 - page 71
E-69 Removing a PC Car d Press the eject button on the left side of PC card slot with the stylus as shown b y the arrow , and pull out the PC card while holding onto the end of the PC card remov al tape. Inserting a PC Card (When Using the P aper Holder) Check the names of the parts of the Paper Holder before be ginning work. 1. Check that the powe ...
-
Casio IT-3000 - page 72
E-70 Using PC Cards 3. After pushing on both ends of Part A and reattaching to the Handheld Printer T erminal ( ), remov e Part B by removing the scre ws ( ). 4. Insert a PC card to which PC card remov al tape has been attached. Insert the PC card all the way in so that the top of the PC card faces the top of the Handheld Printer T erminal. (The il ...
-
Casio IT-3000 - page 73
E-71 7. While spreading apart both ends of P art A ( ), remov e Part A from the Handheld Printer T erminal by lifting up Part A until the projections reach the upper edges of the groov es of Part B ( ), and then press on Part C and P art D from the left and right sides ( ). Next, push on both ends of Part A to fasten to the Handheld Printer T ermin ...
-
Casio IT-3000 - page 74
E-72 1 2 SD memory card can be installed in the SD Memory Card slot on the Handheld Printer T erminal. Insert (or remov e) an SD memory card according to the procedure described below . Inserting an SD Memory Card 1. Check that the power is of f. If the po wer is on, alw ays make sure to turn it of f by pressing the power k ey . 2. Open the cover o ...
-
Casio IT-3000 - page 75
E-73 Connect a bar code reader to the RS-232C interface connector (8-Pin) on the Handheld Printer T erminal. Connecting the bar code reader 1. Check that the power is of f. If the po wer is on, always make sure to turn it of f by pressing the power k e y . Open the cover of the RS-232C interface connector . ( ) 2. Insert the plug of the bar code re ...
-
Casio IT-3000 - page 76
E-74 Attaching the Screen Protect Co ver to the Handheld Printer T erminal prev ents the screen from being cracked or damaged when carrying. 1. Remove the tw o screws on the right side of the Handheld Printer T erminal. Store the scre ws in a safe place after they ha ve been remov ed. 2. Fasten the Screen Protect Cov er with the two scre ws provide ...
-
Casio IT-3000 - page 77
E-75 Attaching the Splash Protect Cov er to the Handheld Printer T erminal lets you use it e ven during inclement weather . Attach the Splash Protect Cov er by following the procedure described belo w . 1. Press the ridged ( ) portions ( ) of the paper outlet cov er while spreading apart the locks on the left and right sides ( ) to disengage them a ...
-
Casio IT-3000 - page 78
E-76 5. Close the roll paper holder , slide the lock knobs on the left and right sides as shown in the illustration to align at the “LOCK” position to lock the roll paper holder in position, and then tear of f the protruding roll paper . • Please note that the positions of the lock knobs on the left and right sides are different. 6. Slide the ...
-
Casio IT-3000 - page 79
E-77 Important! • Make sur e to attach the contact cov er pro vided when remo ving the Battery Pack from the Handheld Printer T erminal and storing. • If the battery pack has been left over unused f or a long period of time, the capacity remained decr eases due to spontaneous discharge or chemical decomposition by the battery pack itself. If th ...
Hai una domanda su Casio IT-3000?
Utilizza il modulo sottostante
Se non hai risolto il problema con Casio IT-3000 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Casio IT-3000 è probabile che voglia condividere il modo di risolverlo.