Manuale per l’uso ADTRAN NetVanta 1224R

13 pagine 4.79 mb
Scarica

Vai alla pagina of 13

Summary
  • ADTRAN NetVanta 1224R - page 1

    TECHNICAL SUPPORT NOTE Using the GUI to Configure a N etVanta 1224R/STR fo r Internet Access using an Ethernet Port (Cable or DSL modem) Featuring ADTRAN OS and the Web GUI _____________________________________________________________________________________ Introduction This Technical Support Note shows how to conf igure the NetVanta 1224R/STR for ...

  • ADTRAN NetVanta 1224R - page 2

    Step 2 – Setting up the Private VLAN Interface Click the “VLANs” link to setup the IP addresses for the unit. In the following diagrams, we will change the default IP address to 192.168.1.254. Note: When you submit the default IP address change, you will need to change your workstation IP address to match up with the new subnet and reconnect ...

  • ADTRAN NetVanta 1224R - page 3

    Change the IP address to 192.168.1.254. After changing the default VLAN interface IP address, be sure to change your workstation IP address to match this network. For example, you could use 192.168.1.1 as your workstation IP address with a default gateway of 192.168.1.254. ...

  • ADTRAN NetVanta 1224R - page 4

    Step 3 – Add a New VLAN for the Public Subnet (Port) The public VLAN will be configured in one of three different m odes, (A) IP Routing with a Static IP, (B) IP Routing using DHCP, or (C) PPPoE. DHCP is normally used when connected to a cable modem and PPPoE is often used when connected to a DSL m odem set in pass-through or bridge mode. The fol ...

  • ADTRAN NetVanta 1224R - page 5

    (Option A) – IP Routing with a Static IP Configuration. The IP address 100.100.100.2 is used as an example. The IP address information should have been provided to you by your Internet Service Provider (ISP). ...

  • ADTRAN NetVanta 1224R - page 6

    (Option B) – IP Routing Using DHCP. This is a typical cable modem setup. ...

  • ADTRAN NetVanta 1224R - page 7

    (Option C) – PPPoE (ADSL modem set to pass-through m ode) Set the Interface Mode to PPPoE and click “Apply”. Clicking “Apply” will open a new page to set PPPoE specific settings. ...

  • ADTRAN NetVanta 1224R - page 8

    (Option C) – PPPoE specific settings A username and password are required for PPPoE. Service Name and AC Nam e are rarely used but should be entered if provided by the ISP. P eer Authentication type should almost always be set to “None”. Also, PPPoE should be set for “Negotiated” IP address unless the ISP has specified a static IP address ...

  • ADTRAN NetVanta 1224R - page 9

    Step 4 – Adding a Default Route when using a Static IP Address This step is not required when learning a default route dynamically as in step 3 (option B) when we used DHCP. You need to add a static default route when using IP Routing with a static IP address or PPPoE with a static IP address. Click the “Route Table” link and then add a stati ...

  • ADTRAN NetVanta 1224R - page 10

    Step 5 – Assign an Ethernet Port to be a member of the Public VLAN In the example below, we are setting the first Ethernet port as a mem ber of VLAN 100 and setting it to “edgeport” mode to allow this port to come up im mediately. This port should be plugged into your Internet connection. Make sure your workstation is not plugged into this po ...

  • ADTRAN NetVanta 1224R - page 11

    Step 6-1. The first wizard page is just a warning that this will overwrite any previous firewall settings. Step 6-2. Select the public VLAN interface. In our example, this is VLAN 100. ...

  • ADTRAN NetVanta 1224R - page 12

    Step 6-3. This step will allow you to setup some basic port forwarding. Port forwarding can be done at a later date by adding policies to the “Public” Security Zone. Step 6-4. The final step is to confirm that the default VLAN 1 will share the IP address applied to the public VLAN 100. ...

  • ADTRAN NetVanta 1224R - page 13

    Step 7 – Save Your Changes The basic configuration should be complete after using the Firewall Wizard. Be sure to click “Save” after you make any configuration changes. This will ensure that the configuration will be maintained in the unit by storing it in the NVRAM. Step 8 – Consult Additional Documentation Additional Documentation is avai ...

Fabbricante ADTRAN Categoria Switch

I documenti che otteniamo dal fabbricante del dispositivoADTRAN NetVanta 1224R possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici ADTRAN
- manuali per l’uso NetVanta 1224R
- schede prodotto ADTRAN
- opuscoli
- o etichette energetiche ADTRAN NetVanta 1224R
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso ADTRAN NetVanta 1224R.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione ADTRAN NetVanta 1224R, manuali di manutenzione, brevi manuali o manuali utente ADTRAN NetVanta 1224R. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto ADTRAN NetVanta 1224R.

Manuali per l’uso simili

Manuale completo del dispositivo ADTRAN NetVanta 1224R, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare ADTRAN NetVanta 1224R dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti ADTRAN NetVanta 1224R.

Il manuale per l’uso completo ADTRAN, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale ADTRAN NetVanta 1224R - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice ADTRAN NetVanta 1224R, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per ADTRAN NetVanta 1224R che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo ADTRAN NetVanta 1224R - che ci dovrebbe aiutare nei primi passi durante l'uso ADTRAN NetVanta 1224R
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del ADTRAN NetVanta 1224R
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio ADTRAN NetVanta 1224R in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su ADTRAN NetVanta 1224R?

Utilizza il modulo sottostante

Se non hai risolto il problema con ADTRAN NetVanta 1224R con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con ADTRAN NetVanta 1224R è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)