Manuale per l’uso Canon 100

178 pagine 1.86 mb
Scarica

Vai alla pagina of 178

Summary
  • Canon 100 - page 1

    User’ s Guide BUBBLE JET PRINTER V1 ...

  • Canon 100 - page 2

    2 T able of Contents Introduction ..................................................................................................... 5 How to Use This Manual ................................................................................. 6 Saf ety Precautions ..................................................................................... ...

  • Canon 100 - page 3

    3 T able of Contents Uninstalling Printer Drivers .......................................................................... 65 Routine Maintenance ....................................................................................66 When to Replace the Cartridge and Maintain Print Head ........................... 67 Replacing the Ink Cartridge .. ...

  • Canon 100 - page 4

    4 T able of Contents An Error Message is Displayed on the Screen .......................................... 141 Problems Unique to Windows ................................................................... 150 Problems Unique to the Macintosh ........................................................... 154 Appendices ............................... ...

  • Canon 100 - page 5

    5 Introduction Intr oduction Thank you f or purchasing the Canon S100 Bub ble Jet Printer . This User’ s Guide provides comprehensiv e explanations of the f eatures and functions of the printer . This guide uses the f ollowing symbols to indicate impor tant inf or mation. Alwa ys obser ve these instructions. Warning ➤ Instructions that, if igno ...

  • Canon 100 - page 6

    6 How to Use This Manual Ho w to Use This Manual T o view this User’ s Guide , we recommend that y ou use Acrobat Reader 4.0 or Acrobat Reader 3.0. Please note that screens display ed b y Acrobat Reader 3.0 are slightly diff erent. Use this button to enlarge the viewing screen. Select this b utton in the tool bar and click within the screen. Disp ...

  • Canon 100 - page 7

    7 How to Use This Manual Displa ys the table of contents . Click the heading to jump to the topic. Click the " " symbol to see the headings f or each chapter . Click the " " symbol to close the headings. Use this button to search f or a word. ...

  • Canon 100 - page 8

    8 Saf ety Precautions Safety Precautions Please read the saf ety warnings and cautions provided in this manual to ensure that y ou use the printer safely . Do not attempt to use the printer in any wa y not described in this manual. Warning ➤ You may cause an electric shock/fire or damage the printer if you ignore any of these safety precautions. ...

  • Canon 100 - page 9

    9 Saf ety Precautions Ne ver plug the printer into a pow er sock et that is shared with other equipment (e xtension lead, double adapter , etc.). Ne ver use the printer if the pow er cord is bundled or knotted. If you detect smok e, un usual smells or strange noises around the printer , immediately unplug the printer at the power supply and call f ...

  • Canon 100 - page 10

    10 Saf ety Precautions ■ Maintaining the printer Do not attempt to disassemble or modify the printer . There are no user serviceable par ts inside the printer . The printer contains high-voltage components. Nev er attempt an y maintenance procedure not descr ibed in this guide. ■ W orking around the pr inter Do not use inflammable spr a ys nea ...

  • Canon 100 - page 11

    11 Saf ety Precautions Caution ➤ You may cause injury or damage the printer if you ignore any of these safety precautions. ■ Choosing a location Do not install the printer in a location that is unstable or subject to e xcessiv e vibration. Do not install the printer in locations that are very humid or dusty , in direct sunlight, outdoors, or cl ...

  • Canon 100 - page 12

    12 Saf ety Precautions ■ P ower supply Ne ver remo v e the plug by pulling on the cord. Do not use an e xtension lead. If you do not intend to use the printer f or a long period of time, unplug the printer . Ne ver use a po wer supply v oltage other than that supplied in the countr y of purchase. The correct pow er supply voltage and frequency is ...

  • Canon 100 - page 13

    13 Saf ety Precautions ■ W orking around the pr inter Ne ver put y our hands or fingers in the printer while it is pr inting. Do not place metal objects (paper clips, staples , etc.) or containers of flammable solv ents (alcohol, thinners. etc.) on top of the pr inter . If any f oreign object (metal or liquid) f alls into the printer , unplug t ...

  • Canon 100 - page 14

    14 Printer P ar ts and Their Functions Printer P ar ts and Their Functions • F ront View • Rear Vie w • Inside the Printer ...

  • Canon 100 - page 15

    F ront View 15 Printer P ar ts and Their Functions Fr ont View P aper Guide When loading paper , ensure the left edge just touches this guide. T o move the paper guide, pinch the knob and slide in the appropriate direction. P aper Rest Sheet Feeder Load paper here. P aper f eeds automatically , one sheet at a time. Front Co ver Open to replace the ...

  • Canon 100 - page 16

    Rear View 16 Printer P ar ts and Their Functions Rear Vie w USB P ort Connects the printer to a computer through a USB interf ace. ...

  • Canon 100 - page 17

    Inside the Printer 17 Printer P ar ts and Their Functions Inside the Printer Cartridg e Holder Install a BJ car tr idge here. Cartridg e Lock Le ver Locks the BJ cartr idge into the holder . P aper Thickness Le ver Adjusts the gap between the print head and the surf ace of the pr inting paper . ...

  • Canon 100 - page 18

    18 Printer Dr iv er Functions (Windows) Printer Driver Functions (Windo ws) • Opening the Printer Proper ties Dialog Bo x • Printer Proper ties Dialog Bo x Descr iption • BJ Status Monitor Functions • Cancelling a Print Job • Uninstalling Printer Dr iv ers Note ➤ As f ar as the printer dr iver is concerned, all the descriptions and inst ...

  • Canon 100 - page 19

    Opening the Printer Proper ties Dialog Box 19 Printer Dr iv er Functions (Windows) Opening the Printer Pr oper ties Dialog Bo x The Printer Proper ties dialog bo x can be opened from either within an application, or directly from the Windows [Start] menu. ■ Opening the Printer Proper ties dialog bo x from your application prog ram This method is ...

  • Canon 100 - page 20

    Opening the Printer Proper ties Dialog Box 20 Printer Dr iv er Functions (Windows) ■ Opening the Printer Proper ties dialog bo x directly from the [Star t] menu This method is used f or maintenance operations such as print head cleaning, or to specify printer settings common to all application programs. When the Printer Proper ties dialog bo x is ...

  • Canon 100 - page 21

    Printer Proper ties Dialog Box Description 21 Printer Dr iv er Functions (Windows) Printer Pr oper ties Dialog Bo x Description • [Main] T ab • [P age La y out] T ab • [Stamp/Bac kground] T ab • [Maintenance] T ab ...

  • Canon 100 - page 22

    Printer Proper ties Dialog Box Description 22 Printer Dr iv er Functions (Windows) [Main] T ab (1) [Choose Print Mode] f or documents that are mainly te xt. f or printing a draft saving ink and time . f or documents with combinations of te xt, illustrations and graphics . (2) (6) (4) (1) (3) (5) ...

  • Canon 100 - page 23

    Printer Proper ties Dialog Box Description 23 Printer Dr iv er Functions (Windows) f or photographs . T o specify more detailed settings for the print quality or colour , clic k the [Advanced...] button. (2) [BJ Car tr idge] Select the type of BJ car tr idge installed in the printer . (3) [Gra yscale Print] Select to print a greyscale v ersion of a ...

  • Canon 100 - page 24

    Printer Proper ties Dialog Box Description 24 Printer Dr iv er Functions (Windows) ■ [Adv anced...] • [Quality] T ab (1) [Print Quality] Mov e the slide bar to adjust the balance between print quality and speed. Moving the bar to the right enhances pr int quality , and moving to the left increases printing speed. (2) [Halftoning] Usually set at ...

  • Canon 100 - page 25

    Printer Proper ties Dialog Box Description 25 Printer Dr iv er Functions (Windows) (3) [Image Optimizer] Improv es the contours and smoothes jaggedness that occur when photogr aphic or graphic image data is enlarged within an application. (4) [Photo Optimizer] Optimises the colour of images taken from a digital camer a or scanner . It is especially ...

  • Canon 100 - page 26

    Printer Proper ties Dialog Box Description 26 Printer Dr iv er Functions (Windows) ■ [Adv anced...] • [Special Eff ects] T ab (1) [Simulate Illustration] This function manipulates colour image data with cer tain effects . Select the check bo x and adjust the brightness of the image with the [Contrast] slide bar . (2) [Monochrome Eff ects] Print ...

  • Canon 100 - page 27

    Printer Proper ties Dialog Box Description 27 Printer Dr iv er Functions (Windows) ■ [Adv anced...] • [Colour] / [Color] T ab (1) [Colour Adjustment] / [Color Adjustment] Select the check bo x to change [Colour Balance] / [Color Balance], [Output Style], and [Brightness] settings. (2) [Use ICM] Select this check bo x to enab le colour adjustmen ...

  • Canon 100 - page 28

    Printer Proper ties Dialog Box Description 28 Printer Dr iv er Functions (Windows) (3) [Intensity] Mov e the slide bar to adjust the print density . Mo ving the bar to the right increases the density . ...

  • Canon 100 - page 29

    Printer Proper ties Dialog Box Description 29 Printer Dr iv er Functions (Windows) ■ [Adv anced...] • [Sav e] T ab Sav e specified settings as a print mode. (1) Enter a title f or the new print mode in the [Title]. (2) Select an icon f or the new print mode from the [Icon Selection]. If required, enter the description of the pr int mode in the ...

  • Canon 100 - page 30

    Printer Proper ties Dialog Box Description 30 Printer Dr iv er Functions (Windows) Note ➤ You can also delete print modes. Select an icon in the [Saved Settings], click the [Delete] button. ...

  • Canon 100 - page 31

    Printer Proper ties Dialog Box Description 31 Printer Dr iv er Functions (Windows) [P a g e La y out] T ab (1) [P age Size] Ensure the correct paper size is selected. (2) [Orientation] Select landscape or por trait and ensure it is the same orientation used in the application. (7) (2) (3) (1) (4) (5) (6) ...

  • Canon 100 - page 32

    Printer Proper ties Dialog Box Description 32 Printer Dr iv er Functions (Windows) (3) [Printing T ype] Select the printing method from among the follo wing. [Nor mal-size Printing] The document is printed according to the or iginal dimensions. This setting is usually selected b y def ault. [Scaled Printing] The document is resized when printed. Wh ...

  • Canon 100 - page 33

    Printer Proper ties Dialog Box Description 33 Printer Dr iv er Functions (Windows) (6) [Duple x Printing] Select to print on both sides of the paper . Y ou can e x ecute this only when selected [Plain P aper] as a [Media T ype]. If g rey ed out, select [Backg round Printing] check bo x. Y ou can also select the stapling position. When [Booklet Prin ...

  • Canon 100 - page 34

    Printer Proper ties Dialog Box Description 34 Printer Dr iv er Functions (Windows) [Stamp/Bac kgr ound] T ab (1) [Stamp] Choose the stamp . (2) [Place stamp ov er te xt] When selected, the stamp is printed ov er the pr int data. (3) [Stamp first page only] Prints the stamp only on the first page. (1) (8) (2) (3) (4) (5) (6) (7) ...

  • Canon 100 - page 35

    Printer Proper ties Dialog Box Description 35 Printer Dr iv er Functions (Windows) (4) [Define Stamp ...] This allows y ou to create new stamps , or modify details of a selected stamp . (5) [Backg round] Choose the backg round image you wish to use . (6) [Backg round first page only] Prints the background image only on the first page . (7) [Sele ...

  • Canon 100 - page 36

    Printer Proper ties Dialog Box Description 36 Printer Dr iv er Functions (Windows) [Maintenance] T ab (1) Click to start pr int head cleaning. For more details , refer to " Print Head Cleaning ". (2) Click to print a nozzle chec k patter n to ensure that ink is being discharged properly . F or more details, ref er to " Printing the N ...

  • Canon 100 - page 37

    Printer Proper ties Dialog Box Description 37 Printer Dr iv er Functions (Windows) (3) [Star t Status Monitor] Checks the printer status and the progress of printing jobs. ...

  • Canon 100 - page 38

    BJ Status Monitor Functions 38 Printer Dr iv er Functions (Windows) BJ Status Monitor Functions The BJ Status Monitor checks the status of the printer . If an error occurs, the status monitor indicates the nature of the error and suggests an appropriate solution. ■ Launching the BJ Status Monitor The BJ Status Monitor launches automatically when ...

  • Canon 100 - page 39

    BJ Status Monitor Functions 39 Printer Dr iv er Functions (Windows) Note ➤ To open the BJ Status Monitor when the printer is not printing, click the [Maintenance] tab in the Printer Properties dialog box and click the [Start Status Monitor] button. ...

  • Canon 100 - page 40

    BJ Status Monitor Functions 40 Printer Dr iv er Functions (Windows) ■ When errors occur The BJ Status Monitor is automatically displa yed when an error occurs , e.g. if the printer runs out of paper . In such cases, tak e the appropriate action as descr ibed in the [Printer Status] tab . Click the [Guide] tab and f ollo w the instructions on scre ...

  • Canon 100 - page 41

    Cancelling a Print Job 41 Printer Dr iv er Functions (Windows) Cancelling a Print Job T o cancel the current pr int job , first open the BJ Status Monitor . 1 Click the [Canon BJ Printer Status Monitor] icon on the T ask Bar . 2 Click [Cancel Printing]. Note ➤ If [Cancel Printing] is greyed out, press the printer's RESUME/CANCEL button to t ...

  • Canon 100 - page 42

    Uninstalling Printer Dr iv ers 42 Printer Dr iv er Functions (Windows) Uninstalling Printer Driver s Use the Uninstaller to delete any unw anted printer dr ivers and an y associated files at the same time. 1 Click the [Start] button and select [Programs], [BJ Printer], [Uninstall]. 2 Click [Y es] when the confir mation message appears. 3 When all ...

  • Canon 100 - page 43

    43 Printer Dr iv er Functions (Macintosh) Printer Driver Functions (Macintosh) • Description of Pr int Settings • BJ Print Monitor • Cancelling a Print Job • Using the Printer with a Networ k • Uninstalling Printer Dr iv ers ...

  • Canon 100 - page 44

    Description of Pr int Settings 44 Printer Dr iv er Functions (Macintosh) Description of Print Settings • [P age Setup] Dialog Bo x • [Printer Utility] Dialog Bo x • [Print] Dialog Box • [Detailed Setting] Dialog Bo x • [Options] Dialog Bo x • [Register Settings] Dialog Bo x ...

  • Canon 100 - page 45

    Description of Pr int Settings 45 Printer Dr iv er Functions (Macintosh) [P a g e Setup] Dialog Bo x The P age Setup dialog bo x contains settings f or the printed page, such as the size of the print media, and resizing the pr inted image. T o open the P age Setup dialog bo x, select [P age Setup] from the [File] menu in y our application program. ...

  • Canon 100 - page 46

    Description of Pr int Settings 46 Printer Dr iv er Functions (Macintosh) (3) [Scale] Specify the scaling percentage to resize the document f or printing. (4) [Orientation] Select landscape or por trait printing. (5) [Custom] T o specify a custom paper size, clic k this button to open the [Custom] dialog bo x after selecting [Custom 1] to [Custom 3] ...

  • Canon 100 - page 47

    Description of Pr int Settings 47 Printer Dr iv er Functions (Macintosh) [Printer Utility] Dialog Bo x The [Printer Utility] dialog box is displa y ed when you clic k the [Utilities] button in the [P age Setup] dialog bo x. (1) Select the function you wish to perf orm. (2) Displa y area showing the v arious maintenance functions, including cleaning ...

  • Canon 100 - page 48

    Description of Pr int Settings 48 Printer Dr iv er Functions (Macintosh) [Print] Dialog Bo x The [Print] dialog box specifies the media type and print settings to be used f or your print job . T o open the [Pr int] dialog bo x, select [Print] from the [File] menu in your application program. (1) [Media T ype] Ensure this setting matches the type o ...

  • Canon 100 - page 49

    Description of Pr int Settings 49 Printer Dr iv er Functions (Macintosh) (4) [Details...] Allows y ou to manually set the print quality and colour settings in the [Detailed Setting] Dialog Bo x . (5) [Options...] Specify the output destination, print order and page lay out f or the document you are printing. (6) [Apply ...] Allows y ou to register ...

  • Canon 100 - page 50

    Description of Pr int Settings 50 Printer Dr iv er Functions (Macintosh) [Detailed Setting] Dialog Bo x T o open the [Detailed Setting] dialog box, select [Manual] in the [Print] dialog box and then click [Details ...]. ■ [Quality] P anel (1) P anel displa y icons Click these icons to s witch betw een panels in the [Detailed Setting] dialog box. ...

  • Canon 100 - page 51

    Description of Pr int Settings 51 Printer Dr iv er Functions (Macintosh) (2) [Print Quality] Mov e the slide bar to adjust the balance between print quality and speed. Moving the bar to the right enhances pr int quality , and moving it to the left increases printing speed. (3) [Halftoning] Select either [Dither] or [Diffusion] ink dot configuratio ...

  • Canon 100 - page 52

    Description of Pr int Settings 52 Printer Dr iv er Functions (Macintosh) ■ [Special Eff ects] P anel T o display the [Special Eff ects] panel, clic k the [Special effects] displa y icon. (1) [Simulate illustration] This function manipulates colour image data with cer tain effects . Select the check bo x and adjust the brightness of the image with ...

  • Canon 100 - page 53

    Description of Pr int Settings 53 Printer Dr iv er Functions (Macintosh) ■ [Colour] / [Color] P anel T o display the [Colour] / [Color] panel, clic k the [Colour] / [Color] displa y icon. (1) [Colour Correction] / [Color Correction] Select a colour correction method: [BJ Standard], [ColourSync] / [ColorSync] or [None]. [BJ Standard] is usually th ...

  • Canon 100 - page 54

    Description of Pr int Settings 54 Printer Dr iv er Functions (Macintosh) (2) [Print T ype] F or printing that emphasises inter mediate colours, select [Photo]. For printing that emphasises the brightness of pr imar y colours, select [Gr aphics]. F or documents that contain large amounts of a basic colour , select [Spot Colour] / [Spot Color]. (3) [ ...

  • Canon 100 - page 55

    Description of Pr int Settings 55 Printer Dr iv er Functions (Macintosh) [Options] Dialog Bo x (1) [La yout] Use this function to print more than one page on a single sheet of paper . T ypically , this setting is set to displa y [1P age/Sheet Printing]. If another option is selected, [P age Order] and [Border] are no longer gre yed out. [2P age/She ...

  • Canon 100 - page 56

    Description of Pr int Settings 56 Printer Dr iv er Functions (Macintosh) [P oster (Divided into 4) / (Divided into 9) / (Divided into 16)] These enlarge and split the print image across sev eral sheets of paper . The pr inter sheets can then be assembled to mak e a larger poster . Y ou can also select [Pr int Cut/P aste lines] and [Print "Cut/ ...

  • Canon 100 - page 57

    Description of Pr int Settings 57 Printer Dr iv er Functions (Macintosh) [Register Settings] Dialog Bo x T o open the [Register Settings] dialog box, clic k the [Apply ...] b utton in the [Print] dialog bo x. (1) [Settings] Displa ys a list of the registered print settings. (2) [Impor t] Impor ts a set of pr int settings. T o use the settings, sele ...

  • Canon 100 - page 58

    BJ Print Monitor 58 Printer Dr iv er Functions (Macintosh) BJ Print Monitor The BJ Print Monitor allows you to chec k the progress of print jobs. Y ou can launch the BJ Print Monitor if background printing is enabled in the [Chooser] utility . ■ Opening the BJ Print Monitor 1 Select [Chooser] from the Apple Menu. 2 Set [Backg rounding] to [On]. 3 ...

  • Canon 100 - page 59

    BJ Print Monitor 59 Printer Dr iv er Functions (Macintosh) ■ BJ Print Monitor Functions The BJ Print Monitor allows you to change the print order of documents queued f or printing. T o change the pr int order , place the mouse pointer o ver the name of the document, hold the mouse button do wn while dragging the document name to the ne w position ...

  • Canon 100 - page 60

    Cancelling a Print Job 60 Printer Dr iv er Functions (Macintosh) Cancelling a Print Job When the BJ Print Monitor is r unning, you can use it to cancel or suspend the currently printing job . 1 Select [BJ Print Monitor] in the Application Menu. 2 Click the name of the print job y ou wish to cancel, then click . The document selected in the Print Mo ...

  • Canon 100 - page 61

    Using the Printer with a Network 61 Printer Dr iv er Functions (Macintosh) Using the Printer with a Netw ork The printer can be used in an Ether net network environment. F ollow the steps described below to connect the printer to the network. Install the printer dr iv er on each network computer that will use the pr inter . F or inf or mation on in ...

  • Canon 100 - page 62

    Using the Printer with a Network 62 Printer Dr iv er Functions (Macintosh) 4 Click [Share]. 5 Confir m that [S100 ser v er] is selected in [Enter new print ser v er name:] then click [Send]. 6 Confir m that the ne w pr int ser v er name has been added to [Current print ser v ers] then click [Close]. 7 Click the close bo x to close the Chooser . ? ...

  • Canon 100 - page 63

    Using the Printer with a Network 63 Printer Dr iv er Functions (Macintosh) ■ Chec king Pr int Status • Checking print status from the print ser ver T o check the status of a print job from the pr int ser v er , star t the BJ Print Monitor . Select [BJ Print Monitor] in the Application Menu. T o close the BJ Pr int Monitor , select [Close Status ...

  • Canon 100 - page 64

    Using the Printer with a Network 64 Printer Dr iv er Functions (Macintosh) ■ BJ Status Monitor Functions .... Click to pause printing of the specified document. .... Click to resume printing. .... Click to cancel printing of the specified document. Note ➤ • Y ou can deter mine the owner of a computer b y selecting the [File Sharing] control ...

  • Canon 100 - page 65

    Uninstalling Printer Dr iv ers 65 Printer Dr iv er Functions (Macintosh) Uninstalling Printer Driver s When a printer dr iv er is no longer needed, use the Installer to delete, all the progr am files associated with it at the same time. Bef ore proceeding, ensure you sa v e any unsa ved files in an y currently running applications. 1 Load the Set ...

  • Canon 100 - page 66

    66 Routine Maintenance Routine Maintenance • When to Replace the Car tr idge and Maintain Pr int Head • Replacing the Ink Car tr idge • Replacing the BJ Car tr idge • Printing the Nozzle Check P attern • Print Head Cleaning • Cleaning the Printer • T ranspor ting the Pr inter ...

  • Canon 100 - page 67

    When to Replace the Car tridge and Maintain Pr int Head 67 Routine Maintenance When to Replace the Car tridge and Maintain Print Head When printing becomes faint or colours are incorrect, clean the print head. If the problems persist after cleaning, you ma y need to replace a car tridge. ➡ Printing the Nozzle Check P attern If the print quality i ...

  • Canon 100 - page 68

    Replacing the Ink Car tridge 68 Routine Maintenance Replacing the Ink Car tridge When the Color BJ Car tr idge BC-21e runs out of ink, replace either of ink car tr idges. • Colour : BCI-21 Color • Black: BCI-21 Black Note ➤ Damage caused by using a refilled cartridge is not covered by the Canon warranty. Canon recommends using only original C ...

  • Canon 100 - page 69

    Replacing the Ink Car tridge 69 Routine Maintenance 2 Remov e the empty ink car tridge. Pull the tab on the ink car tr idge tow ards you to release . Then lift it from its slot. Do not touch the lock le v er ; remove only the ink cartr idge. Impor tant ➤ • Handle ink car tr idges carefully to a void staining clothing or the surrounding area. ? ...

  • Canon 100 - page 70

    Replacing the Ink Car tridge 70 Routine Maintenance 3 Unpack a ne w ink car tridge and remove a protectiv e cap . Impor tant ➤ • Do not re-attach the protectiv e cap once you ha ve remo v ed it. • Once you ha v e remov ed the protectiv e cap , do not touch the open ink por t. ...

  • Canon 100 - page 71

    Replacing the Ink Car tridge 71 Routine Maintenance 4 Inser t the ink car tr idge into a slot. ...

  • Canon 100 - page 72

    Replacing the Ink Car tridge 72 Routine Maintenance 5 Press the ink car tr idge tab until it snaps firmly into place. 6 Close the front cov er . The car tr idge holder mov es to the right. The ink car tr idge installation process is now complete . Note ➤ • T o maintain optimal pr int quality , use an ink car tr idge within six months of first ...

  • Canon 100 - page 73

    Replacing the BJ Car tridge 73 Routine Maintenance Replacing the BJ Car tridge When print head nozzles seem to be wor n out, replace the whole BJ car tr idge with ne w one. These two types of BJ car tridges are av ailable . • Color BJ Car tr idge BC-21e: holds a set of ink car tr idges BCI-21 color and b lack. • Black BJ Cartr idge BC-20: f or ...

  • Canon 100 - page 74

    Replacing the BJ Car tridge 74 Routine Maintenance • Refilling car tr idge can result in poor print quality or cause damage to the printer . Damage caused b y using a refilled car tridge is not cov ered b y the Canon warr anty . Canon recommends using only BJ car tridges to ensure the best quality . 1 Ensure that the printer is on, and then ope ...

  • Canon 100 - page 75

    Replacing the BJ Car tridge 75 Routine Maintenance Lift the BJ car tr idge from the holder . When the car tr idge runs out of ink, dispose of it immediately . If you remo v e a par t-used car tr idge , store it in a specific car tridge container . Impor tant ➤ • Handle ink car tr idges carefully to a void staining clothing or the surrounding a ...

  • Canon 100 - page 76

    Replacing the BJ Car tridge 76 Routine Maintenance 3 Unpack the ne w BJ car tridge and remove a protectiv e cap and tape . Impor tant ➤ • Do not re-attach the protectiv e cap once you ha ve remo v ed it. • Once you ha v e remov ed the protectiv e cap and tape, do not touch the nozzles. ...

  • Canon 100 - page 77

    Replacing the BJ Car tridge 77 Routine Maintenance 4 Inser t the BJ car tr idge in the car tr idge holder . Low er the lock le v er until it locks . ...

  • Canon 100 - page 78

    Replacing the BJ Car tridge 78 Routine Maintenance 5 Close the front cov er . The car tr idge holder mov es to the right. The BJ car tr idge installation process is now complete . Note ➤ To maintain optimal print quality, use a BJ cartridge within a year of first use. ...

  • Canon 100 - page 79

    Printing the Nozzle Check P attern 79 Routine Maintenance Printing the Nozzle Chec k P attern Print the nozzle check pattern to deter mine whether the ink is discharged proper ly . Use this function when printed results are blurred or colours are incorrect. Nozzle check pattern printing can be ex ecuted from the Windo ws and Macintosh pr inter driv ...

  • Canon 100 - page 80

    Printing the Nozzle Check P attern 80 Routine Maintenance Macintosh 1 Ensure the printer is on and load a sheet of A4 or Letter paper in the printer . 2 Open the P age Setup dialog bo x. The P age Setup dialog bo x can nor mally be opened b y selecting [P age Setup ...] in the [File] menu. 3 Click the [Utilities] b utton to open the Printer Utiliti ...

  • Canon 100 - page 81

    Printing the Nozzle Check P attern 81 Routine Maintenance ■ Printing the Nozzle Check P attern through the Pr inter 1 Ensure the printer is on and load a sheet of A4 or Letter paper in the printer . 2 Press the RESUME/CANCEL button twice quic kly . ➡ Examining the Nozzle Check P atter n ...

  • Canon 100 - page 82

    Printing the Nozzle Check P attern 82 Routine Maintenance ■ Examining the Nozzle Chec k P atter n The nozzle check pattern should appear as f ollows when ink is discharged properly . Examine the nozzle check pattern output by the printer . Color BJ Cartridg e Black BJ Cartridge If the patter n is brok en, missing or any of the colours is not prin ...

  • Canon 100 - page 83

    Print Head Cleaning 83 Routine Maintenance Print Head Cleaning Clean the print head if you suspect that the nozzles might be clogged. Head cleaning can be perf or med either from the printer dr iv ers or from the pr inter itself . Note ➤ Cleaning the head consumes ink, so perform head cleaning only when necessary. Do not perf or m any other oper ...

  • Canon 100 - page 84

    Print Head Cleaning 84 Routine Maintenance 3 Click the [Maintenance] tab and then clic k the print head cleaning icon. 4 When a confir mation message is displa yed, clic k [OK]. Macintosh 1 Ensure the printer is on. 2 Open the P age Setup dialog bo x. The P age Setup dialog bo x can nor mally be opened b y selecting [P age Setup ...] in the [File] ...

  • Canon 100 - page 85

    Print Head Cleaning 85 Routine Maintenance ■ Cleaning the Print Head from the Pr inter This method resets the printer so any print data stored in the pr inter is lost. 1 Ensure the printer is on. 2 Hold down the RESUME/CANCEL b utton f or longer than 2 seconds. ...

  • Canon 100 - page 86

    Cleaning the Printer 86 Routine Maintenance Cleaning the Printer During nor mal pr inting, ink and small scraps of paper accum ulate in the pr inter . When the accumulated debris becomes clearly visible, clean the printer by the f ollo wing procedure. 1 Unplug the printer . Caution ➤ Always ensure you unplug the printer before cleaning the printe ...

  • Canon 100 - page 87

    Cleaning the Printer 87 Routine Maintenance 2 Open the front cov er , and wipe out the inter ior of the printer with a dr y cloth. Wipe aw a y any stra y drops of ink, scr aps of paper , and dust. P a y special attention to cleaning the blac k panel that can be most easily soiled. Do not touch any of the printer's inter nal components, such as ...

  • Canon 100 - page 88

    T ranspor ting the Printer 88 Routine Maintenance T ranspor ting the Printer P ac k the pr inter carefully in its original packing materials. If you do not ha v e the original packing materials, wrap the printer carefully in protective material and pack in a sturdy bo x. 1 Unplug the printer . 2 Remov e the paper rest and the paper output tra y . ...

  • Canon 100 - page 89

    T ranspor ting the Printer 89 Routine Maintenance 3 Disconnect the printer cable from the computer and the printer , and then disconnect the pow er cord from the pr inter . 4 Secure the printer with adhesive tape as sho wn, and then pack it in a plastic bag. ...

  • Canon 100 - page 90

    T ranspor ting the Printer 90 Routine Maintenance 5 Attach protectiv e mater ial to both sides of the printer when packing the printer . Clearly label the box as "F ragile", if using a transpor t company . ...

  • Canon 100 - page 91

    91 Printing Media Printing Media • Compatib le Media T ypes • En velopes • High Resolution P aper HR-101N • Glossy Photo P aper GP-301N/GP-301 • High Gloss Film HG-101 • Glossy Photo Cards FM-101 • T ransparencies CF-102 • T -Shir t T ransf ers TR-201 • Banner P aper ...

  • Canon 100 - page 92

    Compatible Media T ypes 92 Printing Media Compatible Media T ypes Y ou can use the f ollowing types of paper and other media. ■ Size • Standard paper : F rom A5 size (148.0 x 210.0 mm / 5.83 x 8.27 in) to legal size (215.9 x 355.6 mm / 8.5 x 14.0 in) • Non-standard paper : F rom 100.0 x 100.0 mm to 241.3 x 584.2 mm (F rom 3.9 x 3.9 in to 9.5 ...

  • Canon 100 - page 93

    Compatible Media T ypes 93 Printing Media ■ W eight 64 to 105 g/m 2 (17 to 28 lb) Do not use paper heavier than this , as it could jam in the printer . ■ T ypes The f ollowing types of media can be used. F or more inf or mation about the media and the printing methods, ref er to the specific sections. Plain paper : Ref er to the Quick Start Gu ...

  • Canon 100 - page 94

    Env elopes 94 Printing Media En velopes Use either European DL or US Com. #10 size env elopes . ■ Preparation f or Printing 1 Press down on all f our corners and edges of the env elopes to flatten them as shown belo w . 2 If the env elopes are curled, hold the opposite cor ners and gently bend them in the opposite direction. Ensure that the fla ...

  • Canon 100 - page 95

    Env elopes 95 Printing Media 3 If the leading edge of an env elope is puff ed up or curled, use a pen to press the env elope flat and sharpen the crease. The env elopes ma y jam in the printer if they are not completely flat and the edges are not aligned. Ensure that no curl or puff exceeds 3 mm (1/8 in). ■ Unsuitab le Env elopes • Env elopes ...

  • Canon 100 - page 96

    Env elopes 96 Printing Media ■ Loading • Place env elopes breadthw ays with the address side f acing upw ards. • Set the paper thickness le v er to the right. • Up to 5 env elopes can be loaded at once . ■ Printer Dr iv er Settings • [Media T ype]: Env elope • [P age Size]: Select either [DL Env .] or [#10 Env .] according to the env ...

  • Canon 100 - page 97

    Env elopes 97 Printing Media ■ Handling of Printed Output Remov e each en velope as it is printed. ■ Printable Area ➡ Printing Area ...

  • Canon 100 - page 98

    High Resolution P aper HR-101N 98 Printing Media High Resolution P aper HR-101N This type of paper provides better colour reproduction than plain paper . It is suitab le f or printing business documents that f eature graphics , and f or photographs . ■ Loading • Load the paper with the whiter side f acing up . • Set the paper thickness le v e ...

  • Canon 100 - page 99

    High Resolution P aper HR-101N 99 Printing Media ■ Printer Dr iv er Settings • [Media T ype]: High Resolution P aper • [P age Size]: Ensure the setting matches the siz e set in the application. ■ Handling of Printed Output Do not stack more than 20 sheets in the paper output tr a y . If the output paper is cur led, it ma y pre vent the ne x ...

  • Canon 100 - page 100

    Glossy Photo P aper GP-301N/GP-301 100 Printing Media Glossy Photo P aper GP-301N/GP-301 This media is still thick er than High Resolution P aper with a glossy printing surf ace to produce print-outs close to photograph quality . ■ Loading • Load the paper with the whiter side f acing up . • Set the paper thickness le v er to the left. • Lo ...

  • Canon 100 - page 101

    Glossy Photo P aper GP-301N/GP-301 101 Printing Media Note ➤ When using the GP-301, first place a loading suppor t sheet (B) included in the package . Do not use sheet (A) for S100. ■ Printer Dr iv er Settings • [Media T ype]: Glossy Photo P aper • [P age Size]: Ensure the setting matches the siz e set in the application. ■ Handling of P ...

  • Canon 100 - page 102

    High Gloss Film HG-101 102 Printing Media High Gloss Film HG-101 A glossy surf ace off ers quality photograph printing. ■ Loading • Load one sheet at a time. • Load with the glossy side up . • Set the paper thic kness le v er to the left. P aper thickness le ver ...

  • Canon 100 - page 103

    High Gloss Film HG-101 103 Printing Media ■ Printer Dr iv er Settings • [Media T ype]: High Gloss Film • [P age Size]: Ensure the setting matches the siz e set in the application. ■ Handling of Printed Output • Remov e each sheet as soon as it is printed. • Do not touch the printed surface until the ink dries (appro x. 15 minutes). ■ ...

  • Canon 100 - page 104

    Glossy Photo Cards FM-101 104 Printing Media Glossy Photo Car ds FM-101 Made of the same material as Glossy Photo P aper GP-301, this photo-size paper is intended f or printing images that cov er the entire surface of the card, without a white border . T o take full adv antage of FM-101, make the images slightly larger than the area indicated by th ...

  • Canon 100 - page 105

    Glossy Photo Cards FM-101 105 Printing Media ■ Printer Dr iv er Settings • [Media T ype]: Glossy Photo Cards • [P age Size]: Canon 101.6 x 152.4 mm (Canon 4 x 6 in) ■ Handling of Printed Output • Remov e each card as soon as it is printed. • Do not touch the printed surface until the ink dries (appro x. two minutes). ■ Printable Area ...

  • Canon 100 - page 106

    T ransparencies CF-102 106 Printing Media T ransparencies CF-102 This film is ideal f or printing presentation mater ial f or use with ov erhead projectors. ■ Loading • Place one sheet of plain A4 or Letter paper under the transparencies in the sheet f eeder . • Set the paper thickness le v er to the left. • A maximum of 20 sheets can be l ...

  • Canon 100 - page 107

    T ransparencies CF-102 107 Printing Media • Although you can print on either side of CF-102, best results can be obtained b y printing on the side toward which it curls when held by the edge . ■ Printer Dr iv er Settings • [Media T ype]: T ransparency • [P age Size]: Ensure the setting matches the siz e set in the application. ■ Handling ...

  • Canon 100 - page 108

    T -Shirt T ransf ers TR-201 108 Printing Media T -Shir t T ransfers TR-201 This paper is used to produce iron-on transf ers. The image is printed bac kwards when [Media T ype] is set to T -Shir t T ransf er in the printer dr iv er . Note ➤ For the customers in the United States, refer to the Quick Start Guide for instructions on using TR-101 T-sh ...

  • Canon 100 - page 109

    T -Shirt T ransf ers TR-201 109 Printing Media ■ Printer Dr iv er Settings • [Media T ype]: T -Shir t T ransf er • [P age Size]: Ensure the setting matches the siz e set in the application. ■ Handling of Printed Output • Remov e each T -shir t transf er as soon as it is printed. • The T -shir t transf er should be used as soon as possib ...

  • Canon 100 - page 110

    Banner P aper 110 Printing Media Banner P aper This is long paper that consists of perf orated sheets of A4 or Letter size paper , ideal f or printing long posters or banners (up to six sheets long). ■ Preparation f or Printing • When tearing the banner paper , tear off one more sheet than y ou actually need to print. • The maximum length f o ...

  • Canon 100 - page 111

    Banner P aper 111 Printing Media 3 Place the printer where the pr inted banner output can hang ov er the edge of the table . Ensure the ink does not stain the table or floor . ...

  • Canon 100 - page 112

    Banner P aper 112 Printing Media ■ Printer Dr iv er Settings • [Media T ype]: Plain Paper • [P age Siz e]: When using A4 banner paper : A4 When using letter size banner paper: Letter • [Printing T ype]: Banner Printing f or Windows . On a Macintosh, bef ore creating the document, select [Banner Printing] in the [P age Setup] dialog bo x. ? ...

  • Canon 100 - page 113

    113 T roubleshooting T r oubleshooting • Cannot Install the Printer Dr iv er • Print Quality is P oor or Contains Errors • Printer Does Not Star t or Stops Dur ing Print Jobs • P aper Does Not F eed Properly or P aper J ams • Ink Runs Out T oo Quickly • An Error Message is Displa y ed on the Screen • Prob lems Unique to Windows • Pr ...

  • Canon 100 - page 114

    Cannot Install the Printer Dr iv er 114 T roubleshooting Cannot Install the Printer Driver ■ Follow the installation pr ocedure correctly . Install the printer dr iv er carefully follo wing the procedures described in the Quick Start Guide . If the printer dr iv er was not installed correctly , reinstall it. If you are using Windo ws, delete the ...

  • Canon 100 - page 115

    Cannot Install the Printer Dr iv er 115 T roubleshooting ■ If the Installer for the printer driver does not start up automatically when y ou inser t the Setup Software & User’ s Guide CD-ROM , open the [My Computer] windo w , and then double-c lick the CD-R OM icon. Note ➤ If you are typing in the file name, you must specify the CD-ROM dr ...

  • Canon 100 - page 116

    Print Quality is P oor or Contains Errors 116 T roubleshooting Print Quality is P oor or Contains Error s • Cannot Print to End of Job • Colours are Unclear • Meaningless Characters or Symbols are Printed • Printing is Blurred/Colours are Wrong • Straight Lines are Misaligned • Printed P aper Cur ls or Ink Blots • Bac k of P aper is S ...

  • Canon 100 - page 117

    Print Quality is P oor or Contains Errors 117 T roubleshooting Cannot Print to End of Job ■ Confirm the P age Size setting matches the size of the paper loaded in the printer . First, check the page siz e setting in the application. Then check the [P age Size] setting in the Printer Proper ties dialog bo x f or Windows or the P age Setup dialog ...

  • Canon 100 - page 118

    Print Quality is P oor or Contains Errors 118 T roubleshooting Colour s are Unclear ■ Confirm the media type setting in the printer driver matches the type of paper loaded in the printer . If you are printing a photogr aph or an illustration from a Windows en vironment, also increase [Print Quality]. Clic k [Advanced...] on the [Main] tab to fi ...

  • Canon 100 - page 119

    Print Quality is P oor or Contains Errors 119 T roubleshooting Meaningless Character s or Symbols are Printed ■ If the prob lem only occur s when printing a specific document, try editing the document and then printing it. If this does not resolv e the problem, there ma y be a prob lem with your application program. ...

  • Canon 100 - page 120

    Print Quality is P oor or Contains Errors 120 T roubleshooting Printing is Blurred/Colour s are Wr ong ■ Print the nozzle chec k pattern to ensure that ink is output correctly . If the nozzle check pattern does not print correctly , clean the print head. ➡ Printing the Nozzle Check P attern ➡ Print Head Cleaning If the problem is not resolv e ...

  • Canon 100 - page 121

    Print Quality is P oor or Contains Errors 121 T roubleshooting Straight Lines are Misaligned ■ Remove the BJ cartridge and then reinstall it correctly . ■ In the printer driver settings, select a higher print quality setting. Windows 1 Open the Printer Proper ties dialog bo x. 2 On the [Main] tab , clic k [Advanced...], open the [Quality] tab a ...

  • Canon 100 - page 122

    Print Quality is P oor or Contains Errors 122 T roubleshooting Printed P aper Curls or Ink Blots ■ Use high resolution paper or photo paper to print images that require a lot of ink, (i.e. pictures with intense colour s or photographs). ■ Reduce the [Intensity] setting in the printer driver and try printing again. Windows 1 Open the Printer Pro ...

  • Canon 100 - page 123

    Print Quality is P oor or Contains Errors 123 T roubleshooting Macintosh 1 Open the Print dialog box. 2 F or [Print Mode], select [Manual] and then click [Details]. 3 Click the [Colour] / [Color] icon and then dr ag the [Intensity] slide bar to set the intensity . ...

  • Canon 100 - page 124

    Print Quality is P oor or Contains Errors 124 T roubleshooting Bac k of P aper is Sm udged ■ Remove eac h printed sheet from the output tra y as soon as it is ejected. ...

  • Canon 100 - page 125

    Print Quality is P oor or Contains Errors 125 T roubleshooting Printed Surface is Scratched ■ Ensure y ou are using suitable paper . • The paper weight must be less than 105 g/m 2 (28 lb). If you use paper hea vier than 105 g/m 2 (28 lb), the print head ma y scratch the printed surf ace. Clean the print head first and pr int with the correct p ...

  • Canon 100 - page 126

    Print Quality is P oor or Contains Errors 126 T roubleshooting Windows 1 Open the Printer Proper ties dialog bo x. 2 On the [Main] tab , clic k [Advanced...] and open the [Colour] / [Color] tab . 3 Drag the [Intensity] slide bar to adjust the intensity . Macintosh 1 Open the Print dialog box. 2 F or [Print Mode], select [Manual] and then click [Det ...

  • Canon 100 - page 127

    Print Quality is P oor or Contains Errors 127 T roubleshooting White Streaks ■ Print the nozzle chec k pattern to chec k the ink output. If the patter n is brok en, missing or a specific colour does not pr int, clean the print head. ➡ Printing the Nozzle Check P attern ➡ Print Head Cleaning ...

  • Canon 100 - page 128

    Print Quality is P oor or Contains Errors 128 T roubleshooting Colour s are Uneven or Streaked ■ Increase the print quality setting in the printer driver settings. Windows 1 Open the Printer Proper ties dialog bo x. 2 On the [Main] tab , clic k [Advanced...] to increase the [Print Quality] on the [Quality] tab . Macintosh 1 Open the Print dialog ...

  • Canon 100 - page 129

    Print Quality is P oor or Contains Errors 129 T roubleshooting ■ Set the halftoning method to [Diffusion] in the printer driver settings. Windows 1 Open the Printer Proper ties dialog bo x. 2 On the [Main] tab , clic k [Advanced...] and open the [Quality] tab . 3 Clear the [A uto] checkbo x off and select [Diffusion] f or the [Halftoning] setting ...

  • Canon 100 - page 130

    Printer Does Not Star t or Stops Dur ing Print Jobs 130 T roubleshooting Printer Does Not Star t or Stops During Print Jobs • Printing Does Not Star t • Printing Stops Before It is Completed • Printer Mov es But Does Not Pr int • Car tr idge Holder Does Not Mov e to the Centre • Car tr idge Holder Does Not Retur n to the Home ...

  • Canon 100 - page 131

    Printer Does Not Star t or Stops Dur ing Print Jobs 131 T roubleshooting Printing Does Not Star t ■ Ensure the printer is securely plug ged in. Note ➤ When printing a large amount of data such as a photo or graphics, it takes longer than usual for the computer to process the data and send it to the printer. Simply wait until the processing is c ...

  • Canon 100 - page 132

    Printer Does Not Star t or Stops Dur ing Print Jobs 132 T roubleshooting ■ Ensure the correct printer driver is selected. In Windows , ensure that [Canon S100] is selected in the [Print] dialog box. In Macintosh, ensure that [S100] is selected in the [Chooser]. Note ➤ In Windows, you can set the Canon S100 as the default printer. ■ Ensure the ...

  • Canon 100 - page 133

    Printer Does Not Star t or Stops Dur ing Print Jobs 133 T roubleshooting Printing Stops Bef ore It is Completed ■ W ait f or a while . Printing a large amount of data such as a photo or graphics tak es time for the computer to process the data, during which the pr inter ma y appear to not be functioning. In addition, when continuously printing ma ...

  • Canon 100 - page 134

    Printer Does Not Star t or Stops Dur ing Print Jobs 134 T roubleshooting Printer Mo ves But Does Not Print ■ Either of the ink cartridg es or a BJ cartridg e may empty . Replace with a new one. ➡ Replacing the Ink Car tr idge ■ If there is plenty of ink but the printer does not print, clean the print head. After cleaning the print head, pr in ...

  • Canon 100 - page 135

    Printer Does Not Star t or Stops Dur ing Print Jobs 135 T roubleshooting Car tridge Holder Does Not Move to the Centre ■ Ensure the printer is securely plug ged in. The car tr idge holder will not mov e unless the po wer is on. ■ If the front co ver has been left open f or a while, c lose and reopen it. If the front cov er is left open f or mor ...

  • Canon 100 - page 136

    Printer Does Not Star t or Stops Dur ing Print Jobs 136 T roubleshooting Car tridge Holder Does Not Return to the Home ■ Unplug and plug the printer back, and reinstall the BJ car tridge correctly . If the problem remains , replace the BJ car tr idge with another one. ➡ Replacing the BJ Car tr idge ...

  • Canon 100 - page 137

    P aper Does Not F eed Proper ly or P aper J ams 137 T roubleshooting P aper Does Not Feed Pr operl y or P aper Jams • P aper Does Not F eed Properly • P aper J ams ...

  • Canon 100 - page 138

    P aper Does Not F eed Proper ly or P aper J ams 138 T roubleshooting P aper Does Not Feed Pr operl y ■ Confirm the paper conditions. • The paper is not too thick (less than 105g/m 2 / 28 lb). • The number of sheets loaded does not e xceed the recommended le v el. • The paper is not creased, curled or wr inkled. ➡ Compatible Media T ypes ...

  • Canon 100 - page 139

    P aper Does Not F eed Proper ly or P aper J ams 139 T roubleshooting P aper Jams Remov e the paper according to the f ollowing procedure . 1 Slowly pull the paper out, either from the sheet f eeder or from the paper output slot, whiche ver is easier . If the paper tears and a piece remains inside the printer , open the front cov er and remov e it. ...

  • Canon 100 - page 140

    Ink Runs Out T oo Quic kly 140 T roubleshooting Ink Runs Out T oo Quickl y ■ Do not open and shut the front co ver too often. The printer automatically star ts print head cleaning as you shut the front cov er after leaving it opened f or longer than 5 seconds . Do not open the cover unnecessarily since the cleaning consumes ink. ...

  • Canon 100 - page 141

    An Error Message is Displa yed on the Screen 141 T roubleshooting An Err or Message is Displa yed on the Screen • Error Wr iting to USBxxx • Application Error or Gener al Protection F ault • Other Error Messages • Other Error Messages Windows Windows Windows Macintosh ...

  • Canon 100 - page 142

    An Error Message is Displa yed on the Screen 142 T roubleshooting Err or Writing to USBxxx ■ Ensure the printer is securely plug ged in. ■ Ensure the printer is securely connected to the computer . Note ➤ If you are using a switch box or other devices, remove and reconnect the printer directly to the computer and try printing again. If printi ...

  • Canon 100 - page 143

    An Error Message is Displa yed on the Screen 143 T roubleshooting ■ V erify the USB port status. 1 Right-click [My Computer] and select [Properties]. 2 On the [De vice Manager] tab , double-clic k [Univ ersal serial bus controller], and then double-clic k [Canon S100]. 3 On the [General] tab , chec k f or any indication of a prob lem with the de ...

  • Canon 100 - page 144

    An Error Message is Displa yed on the Screen 144 T roubleshooting ■ There may be a pr oblem in the printer driver . Uninstall the printer driver and reinstall it. ➡ Uninstalling Printer Dr iv ers Also ref er to the procedure “Notes on Handling the USB Interface (f or Windows Users)” in the Quick Start Guide . ■ If the WPS driver or CAPT d ...

  • Canon 100 - page 145

    An Error Message is Displa yed on the Screen 145 T roubleshooting Application Err or or General Pr otection Fault ■ Ensure the application program y ou are using is intended f or your operating system. F or e xample, if y ou attempt to pr int with a Windo ws 3.1 application under Windows 98, the application ma y not function correctly and an erro ...

  • Canon 100 - page 146

    An Error Message is Displa yed on the Screen 146 T roubleshooting ■ Check the amount of free space on the har d disk. Y ou ma y need to increase the amount of free space by deleting an y unnecessar y files. ■ If the prob lem only occur s when printing a specific document, try editing the document and then printing it. If this resolv es the pr ...

  • Canon 100 - page 147

    An Error Message is Displa yed on the Screen 147 T roubleshooting Other Err or Messages ■ If the BJ Status Monitor is display ed, follo w the instructions on screen. If an error occurs during pr inting, the BJ Status Monitor displa ys the error on the [Printer Status] tab . Follo w the instructions on screen. In Windows 98 or Windows Me, clic k t ...

  • Canon 100 - page 148

    An Error Message is Displa yed on the Screen 148 T roubleshooting ■ If one of the follo wing messages is display ed outside of the BJ Status Monitor: Could not spool successfully due to insufficient disk space Increase the amount of free space on the disk by deleting an y unnecessar y files. Could not spool successfully due to insufficient mem ...

  • Canon 100 - page 149

    An Error Message is Displa yed on the Screen 149 T roubleshooting Other Err or Messages ■ If a message with the format "Err or No.: Xn" (where "X" represents a letter and "n" represents a number) is displa yed: Error No.: X202 Not enough memor y f or printing. Increase a vailab le memor y by closing an y other applic ...

  • Canon 100 - page 150

    Problems Unique to Windo ws 150 T roubleshooting Pr oblems Unique to Windows • The BJ Status Monitor is Not Displa y ed • Cannot Print in Background (Windo ws 98/Windows Me only) • Cannot Print Nor mally Windows ...

  • Canon 100 - page 151

    Problems Unique to Windo ws 151 T roubleshooting The BJ Status Monitor is Not Displa yed ■ Ensure "Enable bi-directional support for this printer" is selected. 1 Open the Printer Proper ties dialog bo x from the [Star t] menu. ➡ Opening the Printer Proper ties dialog bo x directly from the [Star t] menu 2 On the [Details] tab (or [P o ...

  • Canon 100 - page 152

    Problems Unique to Windo ws 152 T roubleshooting Cannot Print in Bac kgr ound (Windows 98/Windo ws Me onl y) ■ Check the amount of free space on the har d disk. Backg round printing requires a cer tain amount of disk space. Y ou may need to delete unnecessar y files, or disab le backg round printing. ■ Ensure that backgr ound printing is enabl ...

  • Canon 100 - page 153

    Problems Unique to Windo ws 153 T roubleshooting Cannot Print Normall y ■ If the WPS driver or CAPT driver is installed, either uninstall it or change the driver port to [FILE] as follows. The WPS (Windows Printing System) driver or CAPT (Canon Adv anced Printing T echnology) dr iver ma y disrupt nor mal printing. 1 Click the [Start] button, then ...

  • Canon 100 - page 154

    Problems Unique to the Macintosh 154 T roubleshooting Pr oblems Unique to the Macintosh • J agged T e xt or Graphics, or Banded Gr adations • Cannot Print in Background Macintosh ...

  • Canon 100 - page 155

    Problems Unique to the Macintosh 155 T roubleshooting Jag ged T e xt or Graphics, or Banded Gradations ■ Ensure y our application suppor ts Quick Dra w . If you are using a P ostScript-compatible application, printed text and lines ma y appear jagged and gradations ma y appear banded. As S100 is not a P ostScript printer but a Quick Dr aw printer ...

  • Canon 100 - page 156

    Problems Unique to the Macintosh 156 T roubleshooting Cannot Print in Bac kgr ound ■ Ensure backgr ound printing is enabled. 1 In the Apple menu, select [Chooser]. 2 Click [Bac kgrounding] on. ■ Check the amount of free space on the har d disk. Backg round printing requires a cer tain amount of disk space. Y ou ma y need to remov e unnecessar y ...

  • Canon 100 - page 157

    157 Appendices Appendices • Deleting an Unknown De vice Windo ws ...

  • Canon 100 - page 158

    Deleting an Unknown De vice 158 Appendices Deleting an Unkno wn Device If printer dr iv er installation was not seccessful, carr y out the procedure described in “Notes on Handling the USB interf ace (f or Windows Users)” in the Quick Start Guide . If the problem remains , f ollow the steps belo w to delete the unknown de vice. 1 Click the [Sta ...

  • Canon 100 - page 159

    Deleting an Unknown De vice 159 Appendices • If the unknown de vice is under [Univ ersal serial bus controller] • If the unknown de vice is under [Other de vices] ...

  • Canon 100 - page 160

    Deleting an Unknown De vice 160 Appendices 5 When the confir mation message appears, clic k [OK]. 6 Click [Close] to close the [System Properties] window . In Windows 2000, clic k and then clic k [OK] in the [System Proper ties] window . 7 Click at the top right of the [Control P anel] window to close it. 8 Unplug the printer . 9 Remov e the Setup ...

  • Canon 100 - page 161

    161 Specifications Specifications Printing method: Bubb le Jet on-demand Printing resolution: 720 (horizontal) × 360 (v er tical) dpi. max. Print speed (pr inting with Canon standard patter n): Black printing F ast: 5 ppm Nor mal: 4.5 ppm Colour printing F ast: 2 ppm Nor mal: 1.6 ppm Print direction: Bi-directional Print width: 203.2 mm max. (8. ...

  • Canon 100 - page 162

    162 Specifications Receiv e buff er : 64 KB Interf ace: USB 1.0-compatible Interf ace connector : USB standard Series B receptacle (USB interface) Recommended printer cable: Material: A WG28 (data wiring pair) or A WG20 to 28 (distribution pair) T ype: T wisted-pair shielded cable Length: Up to 5.0 m (16.4 ft) Connectors: USB standard Series B plu ...

  • Canon 100 - page 163

    163 Specifications P o wer supply: Europe A C 230 V±10%, 50 Hz USA/Canada A C 120 V , 60 Hz A ustralia A C 240 V , 50 Hz P o wer consumption: Standby: 2 W Printing: 18 W Dimensions (without a paper rest and paper output tra y): 370 (W) × 191 (D) × 164 (H) mm 14.6 (W) × 7.5 (D) × 6.4 (H) in W eight: Appro x. 2.4 kg (5.5 lb.) ■ F eed method: ...

  • Canon 100 - page 164

    164 Specifications ■ Sheet f eeder capacity: Plain P aper (75 gsm) 50 sheets max. High Resolution P aper 40 sheets max. Env elopes 5 pieces max. Glossy Photo P aper 1 sheet. High Gloss Film 1 sheet Glossy Photo Cards 1 sheet. T ransparencies 20 sheets max. T -Shir t T ransf ers 1 sheet Banner P aper 1 sheet ...

  • Canon 100 - page 165

    165 Specifications ■ Ordinar y pr int media: Regular size: A4, A5, B5, Letter , Legal, European DL, US Com.#10 Custom size: width: 100.0 to 241.3 mm (3.9 to 9.5 in) height: 100.0 to 584.2mm (3.9 to 23.0 in) W eight: 64 to 105 g/m 2 (17 to 28 lb) Canon Special media: High Resolution P aper HR-101N Glossy Photo P aper GP-301N/GP-301 High Gloss Fil ...

  • Canon 100 - page 166

    166 Specifications ■ Graphic image printing: Data f or mat: Canon e xtended mode: Raster image f or mat Resolution: Canon extended mode: 180 dpi ■ BJ Car tr idge: Black BJ Cartr idge BC-20: Nozzles: 128 Ink colours: Black only Capacity: Appro x. 1800 sheets *1 Color BJ Car tr idge BC-21e: Nozzles: 24 per colour , 64 f or b lack Ink car tr idge ...

  • Canon 100 - page 167

    167 Specifications ■ Printer dr iv er operating en vironment: IBM PC/A T -compatible computer running on Windows 98, Windo ws Me, Windo ws 2000 or Macintosh computers with USB interf ace running on Mac OS 8.5 - Mac OS 9.x Hard disk space: Appro x. 40 MB to install on Windo ws 98 and Windows Me , 30 MB on Mac OS, or appro x. 25 MB on Windo ws 200 ...

  • Canon 100 - page 168

    168 Specifications ■ Printing Area T o ensure the best pr int quality , the pr inter allo ws a margin along each edge of media. Printing area (dar k blue): Canon recommends that you print within this area. () Printable area (light b lue): The area where it is possible to print. Howe v er , printing in this area can adv ersely affect the print qu ...

  • Canon 100 - page 169

    169 Specifications A4, B5, A5 Size Printable Area (width x height) A4 203.2 × 287.0 mm / 8.0 × 11.3 in B5 175.2 × 247.0 mm / 6.9 × 9.7 in A5 141.2 × 200.0 mm / 5.6 × 7.9 in 25.4 mm / 1.0 in 23.5 mm / 0.9 in 3.4 mm / 0.13 in 3.4 mm / 0.13 in 7.0 mm / 0.3 in 3.0 mm / 0.12 in Recommended printing area Printable area ...

  • Canon 100 - page 170

    170 Specifications Letter , Legal Size Printable Area (width x height) Letter 203.2 × 269.4 mm / 8.0 × 10.6 in Legal 203.2 × 345.6 mm / 8.0 × 13.6 in 25.4 mm / 1.0 in 23.5 mm / 0.9 in 6.4 mm / 0.25 in 6.3 mm / 0.25 in 7.0 mm / 0.3 in 3.0 mm / 0.12 in Recommended printing area Printable area ...

  • Canon 100 - page 171

    171 Specifications Glossy Photo Cards Size Printable Area (width x height) Glossy Photo Card 109.4 × 159.9 mm / 4.3 × 6.3 in 5.1 mm / 0.16 in 4.1 mm / 0.16 in 25.9 mm / 1.1 in 28.0 mm / 1.1 in Recommended printing area (Printable area is the same.) ...

  • Canon 100 - page 172

    172 Specifications En velopes Size Printable Area (width x height) European DL 203.2 × 100.0 mm / 8 × 4 in US Com. #10 203.2 × 94.7 mm / 8 × 3.7 in 6.4 mm / 0.25 in 10.4 mm / 0.4 in (DL) 31.7 mm / 1.25 in (#10) 7.0 mm / 0.3 in 3.0 mm / 0.12 in 25.4 mm / 1.0 in 23.5 mm / 0.9 in Pr intab le area Recommended printing area. ...

  • Canon 100 - page 173

    173 Specifications Banner P aper Size Printable Area (width x height) Banner P aper A4: 203.2 × 1779.0 mm / 8.0 × 70.0 in Letter : 203.2 × 1673.4 mm / 8.0 × 66.0 in 3.4 mm / 0.13 in 3.4 mm / 0.13 in 3.0 mm / 0.12 in 24.5 mm / 1.0 in Max. 6 sheets Min. 2 sheets Recommended printing area Printable area ...

  • Canon 100 - page 174

    174 Inde x A Application Error 145 B Background printing (Macintosh) 58 Background printing (Windows) 152 Banner Paper 110 BJ Cartridge 67, 73 BJ Print Monitor (Macintosh) 58 BJ Status Monitor (Macintosh) 64 BJ Status Monitor (Windows) 38, 147, 151 C Cancelling a Print Job (Macintosh) 60 Cancelling a Print Job (Windows) 41 CAPT driver 144, 153 Cart ...

  • Canon 100 - page 175

    175 Inde x Client (Macintosh) 62 Compatible Media Types 92 D Deleting an Unknown Device 158 E Envelopes 94 Error Message 141, 147, 149 F Front cover 15, 135 G Gamma Correction (Macintosh) 54 General Protection Fault 145 Glossy Photo Cards FM-101 104 Glossy Photo Paper GP-301 100 Glossy Photo Paper GP-301N 100 H High Gloss Film HG-101 102 High Resol ...

  • Canon 100 - page 176

    176 Inde x M Media Type (Macintosh) 48 Media Type (Windows) 23 N Network (Macintosh) 61 Nozzle Check Pattern 82 O Opening the Printer Properties Dialog Box (Windows) 19 P [Page Setup] Dialog Box (Macintosh) 45 Page Size (Windows) 31 Paper Guide 15 Paper Jams 139 Paper Output Tray 15 Paper Rest 15 Paper Size (Macintosh) 45 Paper Thickness Lever 17 P ...

  • Canon 100 - page 177

    177 Inde x Printer Driver (Windows) 18 Printer Properties Dialog Box (Windows) 19, 21 Printing Area 168 Printing the Nozzle Check Pattern 79 R Replacing BJ Cartridge 73 Replacing Ink Cartridge 68 RESUME/CANCEL Button 15 S Sheet Feeder 15 Simulate illustration (Macintosh) 52 Simulate Illustration (Windows) 26 Specifications 161 T Transparencies CF-1 ...

  • Canon 100 - page 178

    178 Inde x W When to Replace Cartridge and Maintain Print Head 67 WPS driver 144, 153 ...

Fabbricante Canon Categoria Printer

I documenti che otteniamo dal fabbricante del dispositivoCanon 100 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Canon
- manuali per l’uso 100
- schede prodotto Canon
- opuscoli
- o etichette energetiche Canon 100
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Canon 100.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Canon 100, manuali di manutenzione, brevi manuali o manuali utente Canon 100. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Canon 100.

Manuali per l’uso simili

Manuale completo del dispositivo Canon 100, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Canon 100 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Canon 100.

Il manuale per l’uso completo Canon, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Canon 100 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Canon 100, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Canon 100 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Canon 100 - che ci dovrebbe aiutare nei primi passi durante l'uso Canon 100
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Canon 100
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Canon 100 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Canon 100?

Utilizza il modulo sottostante

Se non hai risolto il problema con Canon 100 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Canon 100 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)