Canon 580Ex IIの取扱説明書

62ページ 5.31 mb
ダウンロード

ページに移動 of 62

Summary
  • Canon 580Ex II - page 1

    Canon SPEEDLITE 580EXII I I I INSTRUCTION MANUAL MODE D'EMPLOI MANUAL DE INSTRUCCIONES ...

  • Canon 580Ex II - page 2

    Canon SPEEDLITE SBOEXII I ...

  • Canon 580Ex II - page 3

    Thank you for purchasing a Canon product. The Canon Speedlite 580EX II is an EOS-dedicated, high-output flash unit automatically compatible with E-TTL II, E-TTL, and TTL autoflash. It can serve as an on-camera flash as well as a master unit or a slave unit in a wireless, multiple-Speedlite system. It has the same dust- and water-resistance as EOS-1 ...

  • Canon 580Ex II - page 4

    Contents I I II 111111 II 1 1 Getting Started and Basic Operation 7 2 Using Flash 13 3 Wireless Flash 33 4 Reference 47 Conventions Used in this Manual • The < @ > symbol in the text refers to the Select Dial. The < @ > symbol in the text refers to the Select/Set button. • The sm symbol in the text refers to a Custom Function. • T ...

  • Canon 580Ex II - page 5

    Contacts Nomenclature Flash head/ Wireless transmitter Wireless sensor (p.49) Mounting foot (p.9) Case r Contact cover External power source socket -----~r~: ~~~. ~ t ~ __ 'yl] PC terminal Bracket mounting hole Mini stand 4 ...

  • Canon 580Ex II - page 6

    Bounce angle LCD panel <MODE>-------- Flash model Slave setting button I - <~H/~> (p.11, 22, 24/45, 46) ' /' High-speed sync ~~g/p~~';,7i11Uminationl Ir=J -J--:~:~~~1~:~::::::n Custom Function setting ~ cover (p.8) button (p.6/27) BOn r~ZOOM/+z. '---Battery compartment PILOT 0 0 ~ II irJ lock lever (p.8) <PIL ...

  • Canon 580Ex II - page 7

    LCD Panel <ISO> ISO speed Manual flash output level Flash exposure compensation amount FEB compensation amount <~> High-speed sync (FP flash) <~> FEB < (i!J > Manual zoom Aperture FEB status Stroboscopic flash count Stroboscopic flash frequency Manual flash 1/3-stop increment indicator Custom Function No. Custom Function set ...

  • Canon 580Ex II - page 8

    Getting Started and Basic Operation Installing the Batteries 8 Attaching to the Camera......................................... 9 Turning on the Power Switch................................ 10 Fully Automatic Flash Shooting 11 Using E-TTL II and E-TTL Autoflash in the Shooting Modes.................................................... 12 __ Cautions ...

  • Canon 580Ex II - page 9

    Installing the Batteries Install four size-AA batteries. Open the cover. • Use your thumb to press the battery compartment lock lever, then slide it as shown by the arrow CD to open the cover. Install the batteries. • Make sure the + and - battery contacts are properly oriented as shown in the compartment. Close the cover. • Close the battery ...

  • Canon 580Ex II - page 10

    Attaching to the Camera "I Attach the Speedlite. • Slip the Speed lite's mounting foot into the camera's hot shoe all the way. Secure the Speed lite. • On the mounting foot, slide the lock lever to the right. .. - When the lock lever clicks in place, it will be locked. Detach the Speed lite. • While pressing the lock-release bu ...

  • Canon 580Ex II - page 11

    Turning on the Power Switch ,II 11111 III 1111 111111111111111 1 Set the power switch to <ON>. l'" The flash recycling starts. Check that the flash is ready. • The pilot lamp will first turn green (ready for quick flash), then red (flash ready). Pressing the pilot lamp will fire a test flash. About Quick Flash Quick flash enables ...

  • Canon 580Ex II - page 12

    Fully Automatic Flash Shooting •• "1"1&"." When you set the camera's shooting mode to < P > (Program AE) or < 0 > (Full Auto), E- TTL II/E- TTL fully automatic flash will make it as easy as normal AE shooting in the < P > and < 0 > modes. TT Zoom 50mm Set the Speedlite to <ETTL>. ...

  • Canon 580Ex II - page 13

    Using E-TTL II and E-TTL Autoflash in the Shooting Modes BI Just set the camera's shooting mode to < Av > (aperture-priority AE), <Tv> (shutter-priority AE), or <M> (manual) and you can use E-TTL 11/ E-TTL autoflash. Select this mode when you want to set the shutter speed manually. The camera will then automatically set the a ...

  • Canon 580Ex II - page 14

    Using Flash ~ Flash Exposure Compensation 14 ~ FEB 15 FE L : FE Lock........................................................ 16 ~ High-speed Sync............................................. 17 Bounce Flash..... 18 ZOOM: Setting the Flash Coverage and Using the Wide Panel..................................................... 20 M: Manual Flash...... ...

  • Canon 580Ex II - page 15

    ~ Flash Exposure Compensation l. 1111 II 111I L II In the same way as normal exposure compensation, you can set exposure compensation for flash. The flash exposure compensation amount can be set up to ±3 stops in 1/3-stop increments. (If the camera's exposure compensation is in 1/2-stop increments, flash exposure compensation will be in 1/2-s ...

  • Canon 580Ex II - page 16

    ~ FEB ,1iI1I"1 i;;;11 11'11;;;11 lllii! 1'11,;;11 U'iliiU111 II 1I1111111~1 You can take three flash shots while automatically changing the flash output for each shot up to ±3 stops in 1/3-stop increments (1/2-stop increments if the camera enables only 1/2-stop increments). This is called FEB (Flash Exposure Bracketing). Select ...

  • Canon 580Ex II - page 17

    FEL: FE Lock III1III[ .. __ FE (flash exposure) lock locks the correct flash exposure setting for any part of the scene. With < ETTL > displayed on the LCD panel, you press the camera's < FEL > button. If the camera does not have the < FEL > button, press the <*> button. Focus the subject. Press the <FEL> button. ...

  • Canon 580Ex II - page 18

    'I High-speed Sync With high-speed sync (FP flash), the flash can synchronize with all shutter speeds. This is convenient when you want to use aperture priority for fill-flash portraits. ETT ~ Zoom SOmm Select <~>. Press the < ~H / ~ > button so that <~> is displayed. In the viewfinder, check that the < ~H > icon is dis ...

  • Canon 580Ex II - page 19

    Bounce Flash IIJI.llIl III lIll.1I111111 111II11II111111 11111111111 •• 111111111111111_1.' By pointing the flash head toward a wall or ceiling, the flash will bounce off the surface before illuminating the subject. This can soften shadows behind the subject for a more natural-looking shot. This is called bounce flash. Set the Bounce Direc ...

  • Canon 580Ex II - page 20

    Creating a Catchlight With the catchlight panel, you can create a catchlight in the subject's eyes to add life to the facial expression. '1',: Point the flash head upward by 90°. Pull out the wide panel. .. The catch light panel will come out at the same time. Push the wide panel back in. Push in only the wide panel. Follow the same ...

  • Canon 580Ex II - page 21

    ETTL mJZoom 2'-1mm ZOO M : Setting the Flash Coverage and Using the Wide Panel The flash coverage can be set to match the lens focal length from 24mm to 105mm. The flash coverage can be set automatically or manually. Also, with the built-in wide panel, the flash coverage can be expanded for 14mm wide-angle lenses. Press the <ZOOM/~> butt ...

  • Canon 580Ex II - page 22

    Auto Zoom for Image Size EOS DIGITAL cameras have one of three image sizes. The lens' effective focal length will differ depending on the camera's image size. The Speed lite automatically recognizes the EOS DIGITAL camera's image size and automatically sets the flash coverage for lens focal lengths from 24mm to 105mm. When the Speed ...

  • Canon 580Ex II - page 23

    M: Man u a I F I as h 11111111111111111111 1IlI1III1IlI1IlI1III1IlI1I11I11IlI1I11I1 11111 You can set the flash output from 1/128 power to 1/1 full power in 1/3- stop increments. Use a hand-held flash meter to determine the required flash output to obtain a correct flash exposure. M til II y Zoom SDmm Zoom SDmm 1 Press the <MODE> button so , ...

  • Canon 580Ex II - page 24

    Metered Manual Flash Exposures When the Speed lite is attached to an EOS-1 0 series camera, you can set the flash level manually for closeup subjects. Set the camera and Speed lite. • Set the camera's shooting mode to < M > or < Av > . • ' Set the Speed lite to manual flash. Focus the subject. • Focus manually. Set up an ...

  • Canon 580Ex II - page 25

    M UL T I: Stro bos co pic FI as h i~l.'l"'.lI' •• lII'. •• 'lliIIIl With stroboscopic flash, a rapid series of flashes is fired. It can be used to capture multiple images of a moving subject in a single photograph. You can set the firing frequency (number of flashes per sec. expressed as Hz), the number of fl ...

  • Canon 580Ex II - page 26

    -- To avoid overheating and deteriorating the flash head, do not use stroboscopic flash more than 10 times in succession. After 10 times, allow the Speed lite to rest for at least 15 min. If you try to use the stroboscopic flash more than 10 times in succession, the firing might stop automatically to protect the flash head. If this happens, allow t ...

  • Canon 580Ex II - page 27

    ~ Second-Curtain Sync ,11111111 11111111 II I III II With a slow shutter speed, you can create a light trail following the subject. The flash fires right before the shutter closes. ETTL Zoom SOmm Press the < ~H / ~ > button so that <~> is displayed. []] Second-curtain sync works well in the camera's "bulb" mode. • To re ...

  • Canon 580Ex II - page 28

    C.Fn: Setting Custom Functions 1"''1.'.'~".'1.' You can customize Speed lite features to suit your shooting preferences. You do this with Custom Functions. Custom Function No. Function Settings & Description Reference page C.Fn-OO Distance indicator display C.Fn-01 Auto power off C. Fn-02 Modelin ...

  • Canon 580Ex II - page 29

    Fn []: [] 28 Hold down the <:,C?:-JC.Fn> button until <CIiD> is displayed. Select the Custom Function No. Turn the < @ > dial to set the Custom Function No. Change the setting. Press the < €J > button. The Custom Function No. blinks. Turn the < @ > dial to set the desired number, then press the < €J > button. ...

  • Canon 580Ex II - page 30

    C.Fn-02-3: Convenient when you want to check the depth of field. (p.44) C.Fn-12: If an external power source is used, the flash recycling is powered concurrently by the internal batteries and external power source. In this case, when the internal batteries become exhausted first, shooting might not be possible. If 1 is set, the flash recycling will ...

  • Canon 580Ex II - page 31

    M em External Flash Metering '"IRlln II ! I The flash reflected off the subject is metered by an external metering sensor in real time. When the standard flash exposure is attained, the flash output is cutoff automatically. Auto external metering compatible with the EOS-1 0 Mark III and manual external metering compatible with all EOS cam ...

  • Canon 580Ex II - page 32

    Set the Speedlite to the camera's aperture setting. Press the < @ > button so the aperture setting blinks. Turn the <@> dial to set the aperture, then press the <@> button. After completing the settings, press the shutter button halfway. The effective flash range will be displayed on the Speed lite's LCD panel. • With ...

  • Canon 580Ex II - page 33

    Speedlite Control with the Camera's Menu Screen If the Speedlite is attached to an EOS camera which has a Speedlite control function, it can control the Speedlite as shown below. For the menu operation procedure, refer to your camera's instruction manual. • Setting Speedlite functions The settable functions will vary depending on the fl ...

  • Canon 580Ex II - page 34

    Wireless Flash About Wireless Flash 34 Wireless Settings.................................................. 36 Fully Automatic Wireless Flash............................ 37 Flash Ratio with E- TTL II 41 Setting the Flash Output for Each Slave.............. 45 Setting Manual Flash and Stroboscopic Flash with the Slave 46 ...

  • Canon 580Ex II - page 35

    About Wireless Flash .IIIIIIIIIIIIIIIIIU.IIIIIIUIIII_I ........ _. With multiple Canon Speed lites having the wireless flash feature, you can create various lighting effects with the same ease as using normal E-TTL II autoflash. The settings you input with the 580EX II (master unit) attached to the camera are also automatically transmitted to the s ...

  • Canon 580Ex II - page 36

    Multi-Speedlite, Wireless Lighting Configurations You can create two or three slave groups and set the flash ratio for E- TTL II autoflash shooting (p.41 - 45). Wireless flash with two slave groups (p.41) Indoors ~B 8m (26.2ft.) 12m (39.4ft.) Wireless flash with three slave groups (p.43) Indoors ~B 8m (26.2ft.) 12m (39.4ft.) 35 ...

  • Canon 580Ex II - page 37

    Wi re less 5 etti n9 s 1.''"""'11'.'"""III1I""ll1"""'""IlIill1l You can switch between normal flash and wireless flash. For normal shooting, be sure to set the wireless setting to OFF. Master Unit Setting ETTL -~ --'-1-"------ ...

  • Canon 580Ex II - page 38

    Fully Automatic Wireless Flash This method has all the Speedlites fire at the same flash output with E- TTL II autoflash controlling the total flash output. ETTL mJZoom 2'-1mm Set the camera-attached 580EX II as the master unit. ETTL mJZoom 2'-1mm Set the other 580EX II Speedlites(s) as the wireless slave unit(s). ETTL mJZoom 2'-1mm ...

  • Canon 580Ex II - page 39

    Check the flash operation . • Press the master unit's test firing button. t l ' The slave unit will fire. If the flash does not fire, adjust the slave unit's angle toward the master unit and distance from the master unit. Set the camera and shoot. .' Set the camera in the same way as with normal flash shooting. 15m (49.2ft.) 8 ...

  • Canon 580Ex II - page 40

    []] • The Speedlite's zoom setting will be set automatically to 24mm. It is possible to change the master unit's zoom setting. However, note that the master unit transmits wireless signals to the slave unit(s} with the preflash. Therefore, the flash coverage must cover the slave unit's position. If you change the master unit's ...

  • Canon 580Ex II - page 41

    Using Fully Automatic Wireless Flash Flash exposure compensation and other settings set with the master unit will also be automatically set in the slave units. Thus, you need not operate the slave unit(s). Wireless flash with the following settings can be done in the same way as with normal flash shooting. · Flash exposure compensation · High-spe ...

  • Canon 580Ex II - page 42

    Flash Ratio with E- TTL II With one master unit and one slave unit or two slave groups, you can set the flash ratio for E- TTL II autoflash shooting. The example below has two slave units and the master unit disabled from firing. Indoors 12m (39.4ft.) Setting the Slave Units Two slave units can be assigned to different slave groups by setting the s ...

  • Canon 580Ex II - page 43

    Set the slave 10. • Press the < @ > button. ~, Slave 10 <A> will be set. • For the other slave unit, do steps 1 and 2, turn the < @> dial to select < B >, then press the < @ > button. • Slave 10 <B> will be set. Setting the Master Unit and Shooting 1 Set the wireless mode to <'''Jt'S, ...

  • Canon 580Ex II - page 44

    [l] • The flash ratio range of 8: 1 - 1: 1 - 1:8 is equivalent to 3: 1 - 1: 1 - 1:3 in stops (1/2-stop increments). • The flash ratio under the • mark is shown in parentheses below the scale. 8:1 • 4:1 • 2:1 • 1:1 • 1:2 • 1:4 • 1:8 -------------_ ...... (5.6:1) (2.8:1) (1.4:1) (1:1.4) (1:2.8) (1:5.6) Wireless Flash with Three Slav ...

  • Canon 580Ex II - page 45

    Set the master unit and shoot. Follow "Setting the Master Unit and Shooting" on page 42. In step 4, select <A: B C>. o If < IIlmmJI A: B> is set, the slave unit in slave group < C> will not fire. If you point the slave unit in slave group < C > toward the subject, the subject will be overexposed. Modeling Flash If ...

  • Canon 580Ex II - page 46

    Setting the Flash Output for Each Slave With manual flash and multiple Speed lites, you can set a different flash output for each slave unit. All settings are done with the master unit. (l!i)Zoom 2Ymm 1/: K) IBIII EmmI "Z.11 Press the <MODE> button so that <M> is displayed. M Press the <ZOOM/~> button so that <-;1·'1 ...

  • Canon 580Ex II - page 47

    Setting Manual Flash and Stroboscopic Flash with the Slave 11 Manual flash or stroboscopic flash can be set manually with the slave unit. As with studio flash units, you can set the flash output individually with the slave units for wireless or manual flash. Manual Flash IlaZoom 2Ymm ,I;, 1/ 16 -,~,- Z~~1EmII Stroboscopic Flash IlaZoom 2Ymm .... I ...

  • Canon 580Ex II - page 48

    Reference 580EX II System 48 Troubleshooting Guide......................................... 50 Specifications....................................................... 52 Using a Type-B Camera....................................... 55 ...

  • Canon 580Ex II - page 49

    O)D ® .....-----------1 "' .. -~--- .. ---'---:---'----1 o 8J1I1I/~1I/~ 8 I CD Speedlite 580EX II (On-camera/Master unit) (l) Speedlite Transmitter ST-E2 Dedicated transmitter for wireless control of 580EX 11/430EX set as slave units. Q) Compact Battery Pack CP-E4 Compact, lightweight, and portable external power pack. Provides ...

  • Canon 580Ex II - page 50

    About Color Temperature Information Transmission When the flash fires, the color temperature information is transmitted to the EOS DIGITAL camera. This feature optimizes the flash picture's white balance. When the camera's white balance is set to < m!i!l3 > or < ~ >, it will work automatically. To see if this feature works wit ...

  • Canon 580Ex II - page 51

    Troubleshooting Guide II III I J If there is a problem, refer to this Troubleshooting Guide. The Speed lite does not fire. • The batteries are installed in the wrong orientation . .. Install the batteries in the correct orientation. (p.8) • The Speedlite's internal batteries are exhausted. ~ If the flash recycling time takes 30 sec. or lon ...

  • Canon 580Ex II - page 52

    Auto zoom does not work. • The Speed lite is -not attached securely to the camera . • ' Attach the Speed lite's mounting foot securely to the camera. (p.9) The flash range scale bars blink. • The flash head has been tilted down by 7°. Change the bounce position. (p.19) The periphery or bottom of the picture looks dark. When you set ...

  • Canon 580Ex II - page 53

    On-camera, E-TTL II/E-TTL/TTL autoflash Speed lite Type-A EOS cameras (E-TTL II/E-TTL autoflash) Type-B EOS cameras (TTL autoflash) 58/190 (at 1 05mm focal length, ISO 100 in meters/feet) 24 - 105mm (14mm with wide panel) · Auto zoom (Flash coverage set automatically to match the lens focal length and image size) · Manual zoom · Swinging/tilting ...

  • Canon 580Ex II - page 54

    • Wireless Flash Transmission method: Optical pulse Channels: 4 Wireless options: OFF, Master, and Slave Transmission range (Approx.): Indoors: 12 - 15 m /39.4 - 49.2 ft., Outdoors: 8 - 10m /26.2 - 32.8 ft. Master unit reception angle: ±40° horizontal, ±30° vertical Controllable slave groups: 3 (A, B, and C) Flash ratio control: 1:8 - 1:1 - 8 ...

  • Canon 580Ex II - page 55

    Guide No. (at ISO 100, in meters/feet) Normal Flash (Full Output) and Quick Flash Flash Coverage (mm) 14 24 28 35 50 70 80 105 Normal Flash (Full output) Quick Flash Manual Flash 15/ 28/ 30/ 36/ 42/ 50/ 53/ 58/ 49.2 91.9 98.4 118.1 137.8 164 173.9 190.3 Same as 1/2 to 1/6 manual flash output Flash Output Flash Coverage (rnrn) 14 24 28 35 50 70 80 1 ...

  • Canon 580Ex II - page 56

    Using a Type-B Camera 110111 .11 1.11 •.• 11.11 11111 ...... I.II.IIII.U.1 .; If you use the 580EX II with a Type-B camera (TTL autoflash camera), note the available features and restrictions below. When a Type-B camera is used with the 580EX II set to autoflash, < TTL> will be displayed on the Speedlite's LCD panel. (With a Type-A c ...

  • Canon 580Ex II - page 57

    This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Do not make any changes or modifications to the equipment unless otherwise ...

  • Canon 580Ex II - page 58

    The apparatus shall not be exposed to dripping or splashing. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Dry batteries shall not be subjected to charging. C This mark indicates that the product complies with Australia's EMC regulations. - European Union (and EEA) only. This symbol indicates that this pr ...

  • Canon 580Ex II - page 59

    Canon This Instructions booklet is dated February 2007. For information on the camera's compatibility with system accessories marketed after this date, contact your nearest Canon Service Center. ...

  • Canon 580Ex II - page 60

    Canon CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. ---- CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-0K-CANON CANADA --- CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1 P7, Canada CANON CANAD ...

  • Canon 580Ex II - page 61

    Ca ...... ol8tl CANON PHOTOGRAPHIC PRODUCTS ~.. '.. INTERNATIONAL SERVICE NETWORK ~1' .I/1J)<51E~if-t::::·A. 2ftMAl-';C;cl- ';c~l'.1 /~~o)~~ld:, "'Hc~l'.1 /i~~ffi~~DILLiD~11 L. LiDt) *9 0 IElltRi*~iI~ Ct~cCanon International Warranty SystemO):;/itt')I/~-:7) i10)~~Id:, ftMAcn;clEt->~fij$'i- ct ...

  • Canon 580Ex II - page 62

    PRESENT OWNERSHIP AND PRODUCTS INTERESTED IN Articles dejA en possession au juges dignes d'interllt Produetos en posesi6n y que Ie interesan CAMERAS Appareils -photo CAMARAS (Camera) (Appareil) (CAMARAS) (Camera) (Appareil) (CAMARAS) Complete this card at time of sale. (Camera) (Appareil) (CAMARAS) (Camera) (Appareil) (CAMARAS) A remplir au mo ...

メーカー Canon カテゴリー Camera Flash

Canon 580Ex IIのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 580Ex IIの取扱説明書
- Canonの製品カード
- パンフレット
- またはCanon 580Ex IIの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Canon 580Ex IIの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Canon 580Ex IIの取り付け説明書、サービスマニュアル、簡易説明書、またはCanon 580Ex IIのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Canon 580Ex IIの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Canon 580Ex IIデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCanon 580Ex IIを使用するのを助ける技術的文書のことです。説明書は通常、全てのCanon 580Ex IIユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Canonの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Canon 580Ex IIの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCanon 580Ex IIの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Canon 580Ex IIに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Canon 580Ex IIデバイスの基本機能を使うにあたってのヒント。 Canon 580Ex IIのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Canon 580Ex IIに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCanon 580Ex IIのメーカー/サービスへの連絡先に関する情報。

Canon 580Ex IIについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもCanon 580Ex IIの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCanon 580Ex IIで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)