Casio DT-930の取扱説明書

68ページ 1.82 mb
ダウンロード

ページに移動 of 68

Summary
  • Casio DT-930 - page 1

    Data Collection Terminal Handheld T erminal User’ s Guide Series • Be sure to read "Safety Precautions" inside this guide before trying to use your Handheld T erminal. After reading this guide, keep it in a safe place for future reference. Data Collection Terminal Printed in China AB0302-046021D CASIO COMPUTER CO., L TD. 6-2, Hon-mach ...

  • Casio DT-930 - page 2

    C-2 E-2 BLUETOOTH is a registered trademark owned by Bluetooth SIG. Inc. and licensed to CASIO COMPUTER CO., L TD. _irbqllqe  !"#$ _äìÉíççíÜ=pfdK=fåÅK  !"#$%&'()*+,  !"#$% ...

  • Casio DT-930 - page 3

    E-3 Congratulations upon your selection of this CASIO Product. Be sure to read the following Safety Precautions before trying to use it for the first time. Keep this manual in a handy place for future reference. Safety Precautions The following are the meanings of the markings and symbols used in these Safety Precautions to warn you against the pos ...

  • Casio DT-930 - page 4

    E-4 Danger! ■ Lithium-ion Battery Pack The Lithium-ion Battery Pack is available as an option. ● Never allow the battery pack to become wet. W ater can create the danger of battery pack heat emission, explosion, and fire. ● Never use or leave the battery pack next to open flame, near a stove, or any other area exposed to high heat. Doing so c ...

  • Casio DT-930 - page 5

    E-5 W arning! ■ Disassembly and Modification ● Never try to disassemble or modify the unit in any way . High voltage inside creates the danger of electrical shock. ■ Interior Parts and Components ● Never touch interior high-voltage parts or components. Doing so creates the danger of electrical shock. ■ Abnormal Conditions ● Should the u ...

  • Casio DT-930 - page 6

    E-6 W arning! ■ Interference with the Operation of Other Equipment (Using Wireless Communication) ● Keep your Handheld T erminal at least 22 centimeters (8' 1/10") away from anyone wearing a pacemaker . Radio waves emitted by the Handheld T erminal can affect the operation of a pacemaker . ● In order to protect someone wearing a pac ...

  • Casio DT-930 - page 7

    E-7 W arning! ■ Handling the Coin T ype Lithium Battery ● Do not recharge coin type lithium battery . Doing so may cause it to leak fluid, overheat, explode or burst into flames. ● Do not put the coin type lithium battery in open flame, or apply solder directly to the coin type lithium battery . Doing so may cause it to leak fluid, overheat, ...

  • Casio DT-930 - page 8

    E-8 W arning! ■ Optional Bridge Basic Cradle, Basic Cradle, Satellite Cradle and Cradle-type Battery Charger ● Power these cradles and Cradle-type battery charger only with a power outlet whose voltage matches that marked on the rating plate of each option. Do not plug these options into an extension shared by other appliances. Doing so creates ...

  • Casio DT-930 - page 9

    E-9 Caution! ■ LCD Screen ● Never apply strong pressure to the screen or subject it to strong impact. Doing so can crack the LCD panel glass and create the danger of personal injury. ● Should the LCD panel glass ever break, never touch the liquid inside. Doing so can cause skin irritation and inflammation. • Should liquid from the LCD panel ...

  • Casio DT-930 - page 10

    E-10 Caution! ■ Handling Alkaline Batteries ● Store batteries someplace out of direct sunlight where the temperature and humidity are not high. Not doing so may cause the batteries to leak fluid, overheat or explode. Also, it may cause the life and performance of the batteries to decline. ● These batteries can be disposed of as regular garbag ...

  • Casio DT-930 - page 11

    E-11 Make back-up copies of all important data Caution! ■ Optional Bridge Basic Cradle, Basic Cradle, Satellite Cradle and Cradle-type Battery Charger ● Keep the power cord away from stoves and other sources of extreme heat. Heat can melt the insulation of the power cord and create the danger of fire and electrical shock. ● Never pull on the ...

  • Casio DT-930 - page 12

    E-12 Introduction Make sure you carefully read the following information to ensure that your Handheld T erminal is able to perform at the level for which it is designed. Handling Precautions • Do not throw or drop the Handheld T erminal or otherwise subject it to strong impact, which can damage the LCD screen, interrupt program execution, corrupt ...

  • Casio DT-930 - page 13

    E-13 Product description/Intended use EU/EFT A member states intended EU: Austria, Belgium, Denmark, Finland, France, Germany , Greece, Ireland, Italy , Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom, Czech Republic, Hungary , Poland, Slovenia, Slovakia, Estonia, Latvia, Lithuania, Cyprus, Malta EFT A: Switzerland, Iceland, Li ...

  • Casio DT-930 - page 14

    E-14 • The contents of this manual are subject to change without notice. • The term “Handheld T erminal” as used in this User ’ s Guide refers to the CASIO DT -930 Handheld T erminal unless otherwise noted. • CASIO COMPUTER CO., L TD. assumes no responsibility for any loss or claims by third parties which may arise from the use of this ...

  • Casio DT-930 - page 15

    E-15 Using the Basic Cradle ....................................... E-42 General Guide ..................................................................... E-42 When Y ou Are Using the Down-facing Reader Port Model .. E-44 Setting up the Basic Cradle ................................................. E-44 Serial Connection of Multiple Basic Cradles ...

  • Casio DT-930 - page 16

    E-16 Unpacking When unpacking the Handheld T erminal (either DT -930M50E or DT -930M51E), check carefully that all of the items shown belo w are included. If an ything is missing or damaged, contact your original dealer or y our nearest CASIO Ser vice Pro vider . • Handheld Terminal (down-facing reader port) (forward-facing reader port) DT -930 M ...

  • Casio DT-930 - page 17

    E-17 A v ailab le Models and Options Options Basic Cradle DT -960IOE Cradle-type Battery Charger DT -969CHGE Satellite Cradle DT -964IOE Lithium-ion Battery Pack DT -923LIB DT -930 M50E DT -930 M51E Cables W all Mount Unit f or Bridge Basic Cradle Bridge Basic Cradle HA-E60IO ...

  • Casio DT-930 - page 18

    E-18 RS-232Ccable DT -782RSC Cross-cable for Basic Cradle 14Pin-25Pin (Male) RS-232Ccable DT -783RSC Cross-cable for Basic Cradle 14Pin-25Pin (female) RS-232Ccable DT -787AX Cross-cable for Basic Cradle 14Pin-9Pin (female) RS-232Ccable DT -881RSC Straight cable for Satellite Cradle For modem connection RS-232Ccable DT -882RSC Cross-cable for connec ...

  • Casio DT-930 - page 19

    E-19 4 7 7 3 1 2 4 7 5 12 7 1 9 8 10 6 11 13 14 General Guide 1 Reader port Emits a laser for bar code reading. 2 Read indicator Indicates the status of the read operation: green for a successful read, red when the read is no good. 3 LCD screen Displays various data when a program is being run. 4 Trigger keys Executes the bar code read operation. 5 ...

  • Casio DT-930 - page 20

    E-20 Power Supply The Handheld T erminal has both operating power supply provided by either two AA (LR6)-size alkaline batteries or lithium-ion battery pack, and memory backup power supply provided by lithium battery . In this manual, the words "main battery" refer to both alkaline batteries and the lithium-ion battery pack, unless otherw ...

  • Casio DT-930 - page 21

    E-21 Loading and Removing the AA (LR6)-size alkaline batteries Important! When you load the AA (LR6)-size alkaline batteries, make sure that their positive (+) and negative (–) ends are facing the correct directions. Loading the alkaline batteries 1 Slide the main battery compartment cover lock to the FREE position and remove the cover . 2 Load t ...

  • Casio DT-930 - page 22

    E-22 Power Supply Loading and Removing the Lithium-ion Battery Pack Loading the Lithium-ion Battery Pack 1 Slide the main battery compartment cover lock to the FREE position and remove the cover . 2 Load a lithium-ion battery pack into the main battery compartment in the direction shown in the figure. Load the battery while sliding it in with the ? ...

  • Casio DT-930 - page 23

    E-23 Replacing the Backup Lithium Battery When the backup lithium battery low voltage message appears on the LCD screen, immediately replace the backup battery (lithium). Use a CR2032 lithium battery as the replacement battery . Be sure to turn the Handheld T erminal OFF before you do this. [Caution] ■ For Important Data • When you remove the b ...

  • Casio DT-930 - page 24

    E-24 3 Carefully wipe the backup battery (lithium battery) with a dry cloth before inserting it with the plus (+) side up as shown in the diagram. 4 Push the lithium battery in the direction shown by the arrow to hook it. 5 Close the backup battery cover and tighten the screws. Removing the battery 1 Open the backup battery cover and use a ballpoin ...

  • Casio DT-930 - page 25

    E-25 About the LCD Screen The LCD screen of the Handheld T erminal shows program settings, operational procedures, calculation results and other information. • Display Area 64 dots (V) x 128 dots (H) • Display Characters 6-dot, 8-dot and 10-dot mode Reduced ANK 21 columns x 10 lines, 16 columns x 8 lines, 12 columns x 6 lines ANK 21 columns x 5 ...

  • Casio DT-930 - page 26

    E-26 The wrist strap protects the Handheld T erminal from being damaged as a result of it being dropped by mistake during movement. Follow the procedure below to attach the wrist strap. T o attach the wrist strap 1 Pass the thin end of the wrist strap through the metal hand strap mount (two possible locations) on the bottom side of the Handheld T e ...

  • Casio DT-930 - page 27

    E-27 1 2 3 1 5 4 6 7 Keys and Their Functions Keys available on the Handheld T erminal and their functions are as follows. 1 T rigger keys T rigger a bar code read operation. 2 Control keys CLR key: Cancels input. BS key: Backspaces and deletes one character . S key: Switches between the character input mode and the number input mode. lit on the LC ...

  • Casio DT-930 - page 28

    E-28 Performing a Bar Code Read Operation 1 Press the [PW] key to turn power on. Hold the Handheld T erminal close to the bar code and press the trigger key . 2 The reader port emits a laser to read the bar code. The read indicator lights green when the read is successful. Important! • If you have problems with the read operation, change the angl ...

  • Casio DT-930 - page 29

    E-29 When reading a small bar code, decrease the distance between the Handheld T erminal and the bar code. For larger bar codes, position the Handheld T erminal so that the bar code fits into the laser beam. Sample Bar Codes W arning! ■ Laser Beam ● Never look directly into the laser beam. Doing so can cause serious eye damage. L ** ...

  • Casio DT-930 - page 30

    E-30 Using the Bar Code Reader Adjusting the Laser Beam Width The width of the laser beam emitted from the Handheld T erminal can be adjusted to match the width of the bar code that is being read. When you switch the laser beam width, you must set the beam’s reference point beforehand. 1 T urn the Handheld T erminal ON with the and keys held down ...

  • Casio DT-930 - page 31

    E-31 Beam Width Adjustment Bar Code For down-facing reader port model For forward-facing reader port model [Handling Precautions] • The Handheld T erminal is shipped with the laser beam width already adjusted. So, the laser beam width need not be adjusted. Adjustment is necessary only when the laser beam does not switch to the correct position wh ...

  • Casio DT-930 - page 32

    E-32 IR Communication Application software and input data can be transferred between two DT -930 units using the infrared ports on the bottom of the units. Position the two DT -930 units so they will not accidently move during communication. The orientation of the two units depends on the type of communication you plan to perform. • Conformed IrD ...

  • Casio DT-930 - page 33

    E-33 Bluetooth ® Comm unication The Bluetooth ® interf ace can be used to transf er data to and from a Bluetooth ® compatible printer . Data can be transf erred if the Handheld T erminal is located within three meters of the target de vice (and nothing is bloc king the signal). Important! Observe the following precautions to help ensure that Blu ...

  • Casio DT-930 - page 34

    E-34 Specifications • General CPU: 32-bit RISC T ype Memory: RAM : 4MB (User area 1.6 MB) FROM : 16MB (User area 12.5 MB) • Display T ype: STN LCD with phase correction film Capacity: 128 x 64 dots Display contrast: Manually adjustable Backlight: LED • Laser Scanner Readable Symbologies: EAN, JAN, UPC, NW -7, CODE39, ITF , CODE93, CODE128, MS ...

  • Casio DT-930 - page 35

    E-35 • Power Supply Main: T wo AA (LR6)-size alkaline dry cells or one lithium-ion battery pack Alkaline Battery life: - Approx. 200 hours (using a new set of AA(LR6)-size alkaline batteries, at normal temperature, and in scanning bar code twice per 10 seconds) - Approx. 175 hours (using a new set of AA (LR6)-size alkaline batteries at normal tem ...

  • Casio DT-930 - page 36

    E-36 Using the Bridge Basic Cradle 1 LED power indicator Indicates the charge status of the battery and whether the DT -930 is mounted. Off: Power OFF Lit Green: Power is ON and the DT -930 is correctly mounted. Lit Red: Power is ON and the DT -930 is not correctly mounted. 2 USB connection status Indicates that the USB connection is normal. Off: U ...

  • Casio DT-930 - page 37

    E-37 Setting up the Bridge Basic Cradle 1 Make sure that the Bridge Basic Cradle’s power switch is turned off and then plug the optional AC adaptor (AD-S15050AE) into the AC adaptor jack on the back of the Bridge Basic Cradle. 2 Connect the power cord to the AC adaptor before connecting the power cord to the electrical outlet. 3 Connect the USB c ...

  • Casio DT-930 - page 38

    E-38 Setting up the Bridge Basic Cradle Connecting without Using the AC Adaptor • It is possible to draw power from the personal computer in the bus power mode. This makes it possible to operate the Bridge Basic Cradle without using the AC adaptor. • Power is not supplied to the DT -930 when the USB connection is used to supply power. Replace t ...

  • Casio DT-930 - page 39

    E-39 Mounting on a W all 1 Remove the screws on the bottom of the desktop unit to remove it. 2 Attach the wall mount unit and tighten the screws for the wall mount unit. 3 Insert the screw provided into the location where the hole on the top of the wall mount unit is to be fixed. Do not screw the screw all the way in. Leave about 2 mm between the w ...

  • Casio DT-930 - page 40

    E-40 4 Hang the wall mount unit from the screw through the hole on its top. 5 Insert the screw provided into the top part of the lower hole of the wall mount unit. 6 T ighten both the upper and lower screws. Removing the W all Mount Unit 1 Loosen both the upper and lower screws. 2 Slide the wall mount unit up to remove it. Important! • Check the ...

  • Casio DT-930 - page 41

    E-41 HA-E60IO Bridge Basic Cradle specifications 1. Infrared Inte rfac e: Infrared interface Standard: Conforms to IrDA Ver 1.1 Synchronization: Asynchronous, frame synchronizing Speed: 4 Mbps (MAX) 2. USB Standard: Conforms to USB V er 1.1 Speed: 12 Mbps (MAX) 3. Power supply Power Source: AC adaptor (AD-S15050AE) USB bus power Rated input: When u ...

  • Casio DT-930 - page 42

    E-42 CASIO DATA POWER OFF POWER ON RS-232C RS-485-1 RS-485-2 AC ADAPTOR CASIO 4 5 8 11 14 13 14 10 12 8 6 7 1 3 2 9 Using the Basic Cradle Basic Cradle (DT -960IOE) makes it possible to upload system data and file data between the Handheld T erminal and a personal computer . Y ou can use optional 6-6 pin Modular Cables (DT -788RSC) to connect up to ...

  • Casio DT-930 - page 43

    E-43 1 RS-232C Interface For connection of a PC and uploading/downloading of system data and file data. 2 RS-485 Interface For connection of multiple optional Basic Cradles. 3 AC adaptor jack For connection of the dedicated AC adaptor to supply power . 4 Nose Guide Remove this guide when you are using the down-facing reader port model. 5 T erminal ...

  • Casio DT-930 - page 44

    E-44 Using the Basic Cradle When Y ou Are Using the Down-facing Reader Port Model When you are using a down-facing reader port model, remove the nose guide before use. T o remove the nose guide, remove the two screws using a screwdriver . Setting up the Basic Cradle Use only the dedicated AC adaptor for Basic Cradle to connect to an electrical outl ...

  • Casio DT-930 - page 45

    E-45 3 Plug the AC adaptor into an electrical outlet. 4 After making sure that the pow er switch of the Basic Cradle is in the OFF position, plug the other end of the A C adaptor into the A C terminal at the top of the Basic Cradle. 5 After making sure that the power of the Basic Cradle and personal computer is OFF , remov e the cov er and connect ...

  • Casio DT-930 - page 46

    E-46 Using the Basic Cradle 12345678 Serial Connection of Multiple Basic Cradles Y ou can use optional 6-6 pin Modular Cables (DT -788RSC) to connect up to 16 Basic Cradles in a serial configuration. This configuration makes it possible to exchange data between multiple Handheld T erminals and a personal computer . Connections First connect Basic C ...

  • Casio DT-930 - page 47

    E-47 DT -960IOE Basic Cradle Specifications Infrared Interface: Infrared Standard: CASIO original Control Protocol: Half-duplex Synchronization: Asynchronous Speed: 2,400 to 1 15,200 bps RS-232C Control Protocol: Half-duplex Synchronization: Asynchronous Speed: 2,400 to 1 15,200 bps RS-485 Control Protocol: Half-duplex Synchronization: Asynchronous ...

  • Casio DT-930 - page 48

    E-48 Using the Satellite Cradle Satellite Cradle (DT -964IOE) makes it possible to upload system data and file data between the Handheld T erminal and a personal computer . It can also be used as the charger for the lithium-ion battery pack. Use the RS-232C cable (DT -881RSC/DT -882RSC/DT -883RSC/DT -887AX/AXA) for connecting the Satellite Cradle t ...

  • Casio DT-930 - page 49

    E-49 1 RS-232C Interface For connection to a PC and uploading/downloading of system data and file data. 2 RS-422 Interface For connection of multiple Satellite Cradles. 3 AC adaptor jack For connection of the AC adaptor to supply power . 4 Nose Guide Remove this guide when you are using the down-facing reader port model. 5 T erminal detection switc ...

  • Casio DT-930 - page 50

    E-50 Using the Satellite Cradle When Y ou Are Using the Down-facing Reader Port Model When you are using a down-facing reader port model, remove the nose guide before use. T o remove the nose guide, remove the two screws using a screwdriver . Setting up the Satellite Cradle Use only the dedicated AC adaptor for Satellite Cradle to connect to an ele ...

  • Casio DT-930 - page 51

    E-51 3 Connect the power cord to the AC adaptor before connecting the power cord to the power outlet. 4 After making sure that the power switch of the Satellite Cradle is in the OFF position, plug the other end of the AC adaptor into the AC terminal at the top of the Satellite Cradle. 5 After making sure that the power of the Satellite Cradle and p ...

  • Casio DT-930 - page 52

    E-52 Using the Satellite Cradle Important! • High-sensitivity communications devices are used for the IrDA communications function. A void using units or equipment such as a cellular phone emits radio waves during communication. T o ensure uninterrupted communication, keep the Satellite Cradle away from the equipment (at least 30 centimeters from ...

  • Casio DT-930 - page 53

    E-53 Charging the Battery Pack The follo wing procedure can be used only when a lithium-ion battery pack is loaded in the Handheld T er minal. 1 T ur n on the pow er of the Satellite Cradle, and confirm that its power indicator lights up red. 2 Attach the Handheld T er minal to the Satellite Cradle, making sure that the charge terminals on the bott ...

  • Casio DT-930 - page 54

    E-54 Using the Satellite Cradle Charging the Battery Pack (charging the lithium-ion battery pack separately) 1 Set the power switch of the Satellite Cradle to the ON position. The power indicator of the Satellite Cradle lights red. 2 Load the battery pack in the spare battery compartment on the Satellite Cradle, making sure that the terminals on th ...

  • Casio DT-930 - page 55

    E-55 Serial Connection of Multiple Satellite Cradles Y ou can use optional 6-6 pin Modular Cables (DT -888RSC) to connect up to 7 Satellite Cradles in a serial configuration. This configuration makes it possible to exchange data between multiple Handheld T erminals and a personal computer via the cradles. Connections Connect C-OUT on the Satellite ...

  • Casio DT-930 - page 56

    E-56 Using the Satellite Cradle 123 45678 9 1 0 DIP Switch Settings The following table shows the various settings that are available with the DIP switches located on the back of the Satellite Cradle. Important! • Other settings not shown here are used for special-purpose modes, and should not be used. Handheld T erminal - Satellite Cradle Commun ...

  • Casio DT-930 - page 57

    E-57 DT -964IOE Satellite Cradle Specifications Infrared Interface: Infrared Standard: Conforms to IrDA V er . 1.2 Original Synchronization: Asynchronous Speed: 9,600/38,400/1 15,200bps RS-232C Control Protocol: Full-duplex Synchronization: Asynchronous Speed: 1,200 to 1 15,200bps RS-422 Control Protocol: Full-duplex Synchronization: Asynchronous S ...

  • Casio DT-930 - page 58

    E-58 CHG2 CHG1 CASIO POWER OFF POWER ON AC ADAPTOR CASIO 2 3 7 10 12 12 8 9 11 7 4 5 6 1 Using the Cradle-type Battery Charger The Cradle-type Battery Charger (DT -969CHGE) makes it possible to separately charge battery pack installed in the Handheld T erminal and a spare battery pack (DT -923LIB) installed in the spare battery compartment on the c ...

  • Casio DT-930 - page 59

    E-59 1 AC adaptor jack For connection of the AC adaptor to supply power 2 Nose Guide Remove this guide when you are using the down-facing reader port model. 3 T erminal detection switch Detects whether or not the Handheld T erminal is mounted correctly on the Cradle-type Battery Charger 4 Spare battery pack charge Indicates the charge status of a s ...

  • Casio DT-930 - page 60

    E-60 Using the Cradle-type Battery Charger When Y ou Are Using the Down-facing Reader Port Model When you are using a down-facing reader port model, remove the nose guide before use. T o remove the nose guide, remove the two screws using a screwdriver . Setting up the Cradle-type Battery Charger Use only the AC adaptor specified for use with the Ha ...

  • Casio DT-930 - page 61

    E-61 Charge terminals Power switch (ON) Power indicator Spare Battery Pack Charge Indicator (“CHG 2”) Battery Pack Charge Indicator (“CHG 1”) 3 Plug the AC adaptor into an electrical outlet. 4 After making sure that the power switch of the Cradle-type Battery Charger is at the OFF position, plug the other end of the AC adaptor into the AC a ...

  • Casio DT-930 - page 62

    E-62 Using the Cradle-type Battery Charger [Caution] ■ Ambient T emperature Ranges for the Battery Pack • T emperature ranges for battery pack use in the Handheld T erminal, charging, and storage are specified below . T emperatures outside these ranges create the danger of deterioration of battery pack performance and shortening of its service ...

  • Casio DT-930 - page 63

    E-63 Charging the Battery Pack (charging the lithium-ion battery pack separately) 1 Set the power switch of the Cradle-type Battery Charger to the ON position. The power indicator of the Cradle-type Battery Charger lights red. 2 Load a battery pack in the spare battery compartment on the charger , making sure that the terminals on the side and rear ...

  • Casio DT-930 - page 64

    E-64 Using the Cradle-type Battery Charger [Caution] ■ Ambient T emperature Ranges for the Battery Pack • T emperature ranges for battery pack use in the Handheld T erminal, charging, and storage are specified below . T emperatures outside these ranges create the danger of deterioration of battery pack performance and shortening of its service ...

  • Casio DT-930 - page 65

    E-65 DT -969CHGE Cradle-type Battery Charger Specifications Charger Charge Method: Fixed voltage (with current limiter) Charge T ime: Approx. 6 hours Power Supply Power Source: AC adaptor (DT -9020ADP-GS or DT -9020ADP-US) Power Requirements: 230 V AC (DT -9020ADP-GS) 120 V AC (DT -9020ADP-US) Rated Input: DC 9.5 V , approx. 1,000 mA Dimensions and ...

  • Casio DT-930 - page 66

    E-66 CA L D P H P A B The following installation methods describe how to install the Basic Cradle, Satellite Cradle and Cradle-type Battery charger either on a flat surface place or on a wall. T o hang the cradles and charger on a wall The following installation method is described with the Satellite Cradle as its reference. 1 Attach the wall unit ...

  • Casio DT-930 - page 67

    E-67 2 Remove the desktop guides (L, R). 3 Attach the wall mount guides provided with the DT -930. Insert the wall mount guides into the slits, and then fix them in place by sliding them downwards. 4 Remove the two screws (one each at the top and bottom) that secure the base to the Satellite Cradle. 5 Pressing down on the four corners of the Satell ...

  • Casio DT-930 - page 68

    E-68 6 Position the base on the wall where you want to hang the Satellite Cradle, and use an awl or some other sharp object to mark the positions of the two wood screws. 7 Slip a spacer over each of the wood screws and then drive the screws into the wall at the positions you marked in the previous step. Make sure that the spacers are oriented corre ...

メーカー Casio カテゴリー Stereo System

Casio DT-930のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- DT-930の取扱説明書
- Casioの製品カード
- パンフレット
- またはCasio DT-930の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Casio DT-930の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Casio DT-930の取り付け説明書、サービスマニュアル、簡易説明書、またはCasio DT-930のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Casio DT-930の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Casio DT-930デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCasio DT-930を使用するのを助ける技術的文書のことです。説明書は通常、全てのCasio DT-930ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Casioの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Casio DT-930の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCasio DT-930の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Casio DT-930に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Casio DT-930デバイスの基本機能を使うにあたってのヒント。 Casio DT-930のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Casio DT-930に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCasio DT-930のメーカー/サービスへの連絡先に関する情報。

Casio DT-930についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもCasio DT-930の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCasio DT-930で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (2)

Любовь

Здравствуйте, подскажите пожалуйста, почему когда я ввожу вручную шк или количество, то при выгрузке обнаруживаю лишние позиции. База данных была удалена перед началом работы.

Алена

Добрый день.подскажите как очистить старые данные с CASIO DT-930M51E и записать новые?