AEG ARE I2の取扱説明書

33ページ 0.34 mb
ダウンロード

ページに移動 of 33

Summary
  • AEG ARE I2 - page 1

    Manual Compact Reader ARE I2 Installation Guide for Systems with a Serial Interface (RS 232) ...

  • AEG ARE I2 - page 2

    Manual Page 2 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de Contents 1 INTRODUCTION 5 2 SYSTEM OVERVIEW 5 3 START-UP PROCEDURE 6 4 INSTALLATION 7 4.1 Mounting of the Housing 7 4.2 Grounding of the ...

  • AEG ARE I2 - page 3

    Manual Page 3 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 6.7 BD- Baudrate 19 6.8 TOR – Maximum Reading Time 20 6.9 VS- Show Parameter 20 6.10 VSAVE – Save Parameter 20 7 OPERATING MODES OF ...

  • AEG ARE I2 - page 4

    Manual Page 4 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de ...

  • AEG ARE I2 - page 5

    Manual Page 5 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 1 Intr oduction This document will describe the components of the Com pact Reader System ARE I2 / RS 232 and the procedure how to do the ...

  • AEG ARE I2 - page 6

    Manual Page 6 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de The connection of the cables (power supply and da ta transfer) is done inside of the connection cab (SAB Cab). Together with an sealing ...

  • AEG ARE I2 - page 7

    Manual Page 7 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 4 Installation To get the specified reading performance it is necessary to do the installation carefully step by step as it is described ...

  • AEG ARE I2 - page 8

    Manual Page 8 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de Inside of the SAB Cap there are the pins of following connections: • power supply • data link to the serial interface RS232 The code ...

  • AEG ARE I2 - page 9

    Manual Page 9 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 3 4 5 1 6 Cable 7 4.3.3 Mounting of the Power Supply Cable The power supply cable must be mounted in following steps: • Remove all inn ...

  • AEG ARE I2 - page 10

    Manual Page 10 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 4.3.4 Assembling of the Power Supply and Data Cable (Single Cable Pipe) The connection of the cable is also done inside of the SAB Cab. ...

  • AEG ARE I2 - page 11

    Manual Page 11 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 4.3.5 Final Assembly of the Cable Pipe • Pull by and by all the cable back, until the isolation of the cables are near to beginning o ...

  • AEG ARE I2 - page 12

    Manual Page 12 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 4.3.7 Using the Service Cable ID 70213 Using the Service Cable, no special assembly work inside of the SAB Cab has be done by the custo ...

  • AEG ARE I2 - page 13

    Manual Page 13 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 4.3.8 Using the Power Supply and Data Cable ID 70212 Using the Power Supply and Data Cable, no special assembly work inside of the SAB ...

  • AEG ARE I2 - page 14

    Manual Page 14 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de BFH ID Moderne elektronische Objekterkennung und Verfolgung L 1 L2 L4 L3 L5 ARE I2 5 V isual Signal Lamps To show the operational state ...

  • AEG ARE I2 - page 15

    Manual Page 15 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 6 Settings of the Reader / Most Important Parameters The default value of the opera ting mode parameter is 2.. • MD 2 triggered by an ...

  • AEG ARE I2 - page 16

    Manual Page 16 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de After entering a valid command together with a param eter value, the system answers by sending the parameter value and <CR>. Exam ...

  • AEG ARE I2 - page 17

    Manual Page 17 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de Input format: CID <SP> parameter <CR> Parameter: Value Function 0 no filter function , (default value) 1 suppression of rep ...

  • AEG ARE I2 - page 18

    Manual Page 18 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 0 one out of one (no effect) 1 two out of two ; (default value) Output (example): 1 <CR> Sequence of readings Length of the readi ...

  • AEG ARE I2 - page 19

    Manual Page 19 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 6.6 EC- Echo The command EC changes of the echo function setting. Input format: EC <SP> parameter <CR> Parameter: v Functio ...

  • AEG ARE I2 - page 20

    Manual Page 20 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 6.8 T OR – Maximum Reading T ime Timeout for the reader. TOR is used in operation mode 2 as maxim um gating time for a reading proces ...

  • AEG ARE I2 - page 21

    Manual Page 21 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 7 Operating Modes of the Reader There are two operational modes defined: • Mode 2 The reading process is triggered by an software com ...

  • AEG ARE I2 - page 22

    Manual Page 22 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de Figure 7.1.2 : Software triggered r eading operation with TOR>0 Please note : The TOR parameter is only active, if the GT-Command is ...

  • AEG ARE I2 - page 23

    Manual Page 23 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 7.1.2 Basic Data Exchange Process The master has to send an software comm and to start an read or write process of the reader. After do ...

  • AEG ARE I2 - page 24

    Manual Page 24 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 7.1.4.2 Selective Read RD • Start the reader with the command RD plus Param eters ( plus <CR>). see example below. - You can re ...

  • AEG ARE I2 - page 25

    Manual Page 25 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de • Wait for the answer • Analyse the received answer: 3 characters plus <CR>. < ACK > < CR > Writing process was s ...

  • AEG ARE I2 - page 26

    Manual Page 26 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 7.2 Operating Mode 0 - Continuous Reading When operating continuously the exciter is switched on permanently. The reading cycles are in ...

  • AEG ARE I2 - page 27

    Manual Page 27 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de • NID 1 failure protection.; selecti on guide 2 out 2 transponder codes The result of the reading process may also seen at the LED’ ...

  • AEG ARE I2 - page 28

    Manual Page 28 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 8 Instructions 8.1 General Instructions To avoid any reduction of the reading distance of the reader, the housing must not be brought n ...

  • AEG ARE I2 - page 29

    Manual Page 29 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 8.2 Special Instructions for Using a Read / Write System To transfer the data to the transponder or to control the selective read proce ...

  • AEG ARE I2 - page 30

    Manual Page 30 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 9 Hotline If there are questions or suggestions please be so free an phone: Fax: ++49 (0)731-933-1855 e-mail: info@aegid.de http: www. ...

  • AEG ARE I2 - page 31

    Manual Page 31 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 12 Appendix 12.1 Best Orientation for an F-Type -Reader Compact Reader ARE I2 Internal Antenna F-Typ 1 1 0 2 0 3 0 8 0 1 0 2 0 3 0 5 1 ...

  • AEG ARE I2 - page 32

    Manual Page 32 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 12.2 Best Orientation for an L-Type -Reader Compact Reader ARE I2 Internal Antenna L-Typ Bauteilname 1 1 0 2 0 3 0 8 0 1 0 2 0 3 0 5 1 ...

  • AEG ARE I2 - page 33

    Manual Page 33 / 33- Revision 01 ARE I2 / RS 232 – Installation Guide AEG Identifikationssysteme GmbH Söflinger Straße 100 D-89077 Ulm Tel. ++49(0)731-933-1340/1877 Fax ++49(0)731-933-1855 e-mail: info@AEGID.de 12.3 Assembling of the SAB Cab ...

メーカー AEG カテゴリー Computer Hardware

AEG ARE I2のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- ARE I2の取扱説明書
- AEGの製品カード
- パンフレット
- またはAEG ARE I2の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、AEG ARE I2の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、AEG ARE I2の取り付け説明書、サービスマニュアル、簡易説明書、またはAEG ARE I2のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、AEG ARE I2の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

AEG ARE I2デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがAEG ARE I2を使用するのを助ける技術的文書のことです。説明書は通常、全てのAEG ARE I2ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

AEGの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. AEG ARE I2の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははAEG ARE I2の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。AEG ARE I2に関してこのドキュメントで見つけることができる全てのヒントの目次
3. AEG ARE I2デバイスの基本機能を使うにあたってのヒント。 AEG ARE I2のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。AEG ARE I2に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるAEG ARE I2のメーカー/サービスへの連絡先に関する情報。

AEG ARE I2についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもAEG ARE I2の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAEG ARE I2で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)