Runco CL-500の取扱説明書

32ページ 1.54 mb
ダウンロード

ページに移動 of 32

Summary
  • Runco CL-500 - page 1

    O WNER ’ S O PERA TING M ANU AL CL-500 www.htrgroup.com ...

  • Runco CL-500 - page 2

    ...

  • Runco CL-500 - page 3

    LIMITED WARRANTY Congratulations on your purchase of a Runco video product and welcome to the Runco family! We believe Runco produces “The World’ s Finest Home Theater Product s”. With proper installation, setup and care, you will enjoy many years of un p aralleled video performance. Please read this consumer protection plan carefully and ret ...

  • Runco CL-500 - page 4

    EFFECTIVE W ARRANTY DA TE: This warranty begins on the effective date of delivery to the end user . For your convenience, keep the original bill of sale as evidence of the purchase date. IMPORT ANT : W ARRANTY REGISTRA TION: Please fill out and mail your warranty registration card. It is imperative that Runco knows how to reach you promptly if we s ...

  • Runco CL-500 - page 5

    Runco CL-500 Video Projector User’s Manual 1 Runco CL-500 Video Projector User’s Manual Thank you for your purchase of this qualit y Runco video projector! It has b een designed t o provide you with the quality of video that is expected in a home theater. For the best performance, please read this manual carefully as it is your guide through th ...

  • Runco CL-500 - page 6

    ...

  • Runco CL-500 - page 7

    1 . Overview User’s Manual 3 1. Overview Features High Contrast and Picture Quality This single-DMD DLP TM projector provides excellent contrast ratio, color uniformity and seamlesss picture quality. Fantastic Dynamic Performance and Rich Gray-scale With a 6-segment color wheel, the picture's refresh rate can attain speeds of up to 240 Hz. B ...

  • Runco CL-500 - page 8

    1. Overview Runco 4 Location ❚ Front / Upper Side ❚ Rear / Bottom Side 1. Front Lamp Cover Remove this cover when replacing the lamp. 2. Projection Lens 3. Front IR Sensor 4. Ventilation Holes (exhaust) 5. Focus Ring and Zoom Ring Adjusts the focus and zoom of image. 6. Power LED and Lamp LED Show the status of power and lamp. For more details, ...

  • Runco CL-500 - page 9

    1. Overview User’s Manual 5 Controls and Functions ❚ Control Panel 1. POWER LED Indicate the status of the pow er ■ Light Orange when the AC power cord is plugged into the wall ou tlet (standby mode). Once in the standby mode, you ca n turn on the project or by pressing ON key on t he remote control for ONE second. ■ Light Green when the po ...

  • Runco CL-500 - page 10

    1. Overview Runco 6 ❚ Connector Panel 1. Video (RCA Jack) Composite video si gnal input. 2. S-Video (mini DIN 4-pin) Y/C (S-video) sig nal input 3. Component (RCA Jacks) 480i Component (Y/C B /C R ) video signal input 4. RGB/ HDTV (BNC) DTV Y/P B /P R or DTV RGB vide o signal input. 5. Computer (D-Sub 15-pin) RGB Computer signal inpu t. 6. RS-232 ...

  • Runco CL-500 - page 11

    1. Overview User’s Manual 7 ❚ Remote Control ON Hold down this button for ON E s e c o n d t o t ur n o n t h e unit. OFF Press this button to t urn off the unit. ANAMORPHIC : For 16: 9 DVDs. 4 X 3 : The input signal will be scaled to fit 4: 3 display mode in the center of screen. LETTERBOX : Letter box mode. Image in letter box format is enlar ...

  • Runco CL-500 - page 12

    2. Installation Runco 8 2. Installation Remote Control Notes on Batteries ■ Make sure that the battery polarities ar e correct when installing the batteries. ■ Do not mix an old battery with a new one or different types of batt eries. ■ If you will not use the remote control for a long time , remove the batteries to avoid damage from battery ...

  • Runco CL-500 - page 13

    2. Installation User’s Manual 9 ❚ Adjust the Lens Z oom/Focus ring ❚ Adjust the height Adjust the projected image size you need with the zoom ring on the lens. To focus the image, rotate the focus ring on the lens. There are 4 screw adjusters on the bottom of this unit. You can adjust t he height or projection angl e of this unit by u sing th ...

  • Runco CL-500 - page 14

    Screen __________ (H) x __________ (W) C) VERTICAL OFFSET : Distance between lens center and top edge of viewing area (bottom edge for floor mount): For use on 16 x 9 ratio screens: (screen width x .215) = __________ inches For use on 4 x 3 ratio screens: (screen width x .12) = __________ inches B) THROW DIST ANCE: For 16 x 9 Screens: Minimum: ( ...

  • Runco CL-500 - page 15

    2. Installation 11 C L - 5 0 01 6x9A s p e c tR a t i oS c r e e n Screen He ight Screen Wid t h Min Thro w Dist ance Max Thr ow Dist ance Vert ical Off set Position 40.50 72. 00 116.06 147.06 15.50 43.00 77. 00 123.23 156.14 16.46 45.00 80. 00 128.96 163.40 17.22 47.00 84. 00 134.69 170.67 17.99 49.00 87. 00 140.42 177.93 18.75 50.00 89. 00 143.29 ...

  • Runco CL-500 - page 16

    3. Connecting Runco 12 3. Connecting When connecting, make sure to: 1. Turn off all equipment before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly connected. 4. Connect all audio signals to external speakers. This projector is not equipped with speakers. Connecting Video Inputs ❚ Video/ ...

  • Runco CL-500 - page 17

    3. Connecting User’s Manual 13 ❚ Progressive Comp onent (DTV Y/P B /P R ) ❚ RGBHV (DTV RGB) The RGB BNC input supports two kinds of HD TV formats: Progressive component (DTV Y/P B /P R ) and DTV RGB. The unit will auto detect the resoluti on automatically. G/Y B/P R/P H V BR YCC RS-232C 12V BR Trigger S-Video Computer Video DTV Source G/Y B/P ...

  • Runco CL-500 - page 18

    3. Connecting Runco 14 Connecting a Computer This unit only supp orts resolutions up to XGA. If the input si gnal is greater than XGA, the projector will display a warning message. S-Video Computer G/Y B/P R/P H V BR Trigger Video Y C C RS-232C 12V BR PC or Notebook ...

  • Runco CL-500 - page 19

    4. Basic Operation User’s Manual 15 4. Basic Operation Turning on the Power Zoom/ Focusing Selecting Input Source ■ The Power LED lights orange when power is applied and the power switch is turned on. ■ Press and hold the ON key on the remote con trol for ONE second to turn on the unit. The POWER LED will blink orange during warm up period, t ...

  • Runco CL-500 - page 20

    4. Basic Operation Runco 16 Selecting "ASPECT ratio" Selecting Video Memory Setting Menu ■ Select the proper Aspect Ratio according to the format of signal content. There are four Aspect Ratio for choice: ■ ANAMORPHIC: 4:3 image is stret ched horizontally to fit the 16: 9 screen. This is for 16: 9 DV Ds. ■ 4 X 3: The input s ignal w ...

  • Runco CL-500 - page 21

    4. Basic Operation User’s Manual 17 PIP function Turning off the Power ■ Press the PIP button to enable the PIP function ■ For PIP purposes, there ar e two groups of inputs separated by their display modes: Video Group: Video, S- Video and Component Y/ C B /C R inputs Graphic Group: HDTV i nput and Computer input. ■ The PIP can show one inp ...

  • Runco CL-500 - page 22

    5. Menu Runco 18 5. Menu Using the Menu This unit is equipped with an on screen displ ay (O SD) menu for making various adjustments and settings. There are 3 different menu languages; page 21 Language setting for more details. ■ Press the MENU button to turn on /off the on-screen display menu. ■ Use the ARROW buttons (  /  /  /  ) t ...

  • Runco CL-500 - page 23

    5. Menu User’s Manual 19 5. TINT: Adjust color tones (0 ~ 30). The h igher the settin g, the picture becomes greenish. The lower the setting, the picture becomes purplish. 6. COLOR TEMP.: Adjust the color temperature. ■ 0 : The default color temperature of lamp. ■ 1 : Low color temperature (6500°K). Make the white color reddish. ■ 2 : Midd ...

  • Runco CL-500 - page 24

    5. Menu 20 Active Image Area Active Image Area 16:9 Screens: 4:3 Screens: LETTERBOX: The image in the Letterbox mode will be stretched vertically, and the top and bottom portion 'blanked off'. This ratio is best suited for LaserDisc movies or non-anamorphic DVD's. VIRTUAL WIDE: A 4:3 image is horizontally stretched non-linearly to al ...

  • Runco CL-500 - page 25

    5. Menu User’s Manual 21 ENVIRONMENT Setting Page In this Menu, the global settings for the proje c tor can be made. There are 5 Menu Items: DEFAULT — LAMP T IME R — BACK LIGHT — AUTO OFF — LAMP HOURS. 1. DEFAULT: Load the default value of current in put source. 2. LAMP TIMER: Resets the lamp timer. This should only be done after the lamp ...

  • Runco CL-500 - page 26

    6. Additional Information Runco 22 6. Additional Information Warning Message Rep l ace the Lamp (Contact your Runco Dealer) ■ It is normal for lamp to be darker when this unit has been used for a period of time. ■ " Lamplife is expired ! Please change a new lamp. And reset the lamp timer " message will be displayed for 30 seconds on t ...

  • Runco CL-500 - page 27

    6. Additional Information User’s Manual 23 Troubleshooting 10. Tighten the th ree screws of lamp shield. 11. Put on the front lamp cover. 12. Tighten the screw of front lamp cover. 13. Turn on the power and go into Environment Setting Page to reset the "Lamp Timer " item. Problem Cause Remedy This unit does not turn on. There is no powe ...

  • Runco CL-500 - page 28

    Runc o Spec ifi catio ns Proje ctor Type: Digit al Li ght P rocessing™ ( DLP™) Nati ve Resol ution : 848 x 600 Vide o Sta ndards : NTSC, NTSC 4 .43, PAL-M, PAL-N , SECA M Lam p: 150 W P-VIP L am p Li f e : 1500 hou r s Pict ure Siz e: 40” to 300” diagonal Th row Distance: For 16: 9 Screens: 1. 61 to 2.04 x screen widt h For 4: 3 Screens: 1. ...

  • Runco CL-500 - page 29

    Dimensions Unit: in. (mm) 15.75 in. (400 mm) 1.6 in. (4.5 mm) 1.4 in. (35.26 mm) 13.09 in. (332.5 mm) 6.3 in. (160 mm) 5.9 in. (150 mm) 7.93 in. (201.5 mm) 13.66 in. (347 mm) 4.6 in. (117.7 mm) 5.1 in. (130.2 mm) 6. Additional Information 25 User's Manual + 9.66 in. (245.43 mm) 2.78 in. (70.64 mm) ...

  • Runco CL-500 - page 30

    RS-232C Control Codes Code Function X01 Power On X02 Power Off X03 Message On X04 Message Off X10 Menu (arrow key) X11 Enter (arrow key) X12 Exit (arrow key) X13 Up (arrow key) X14 Down (arrow key) X15 Left (arrow key) X16 Right (arrow key) X20 Switch to Composite input X21 Switch to S_Video input X22 Sw ...

  • Runco CL-500 - page 31

    ...

  • Runco CL-500 - page 32

    RUMA-009550 rev 4-02 Runco International . 2463 T ripaldi W ay . Hayward, CA 94545 . ph (510) 293-9154 . fax (510) 293-0201 . www .runco.com ...

メーカー Runco カテゴリー Home Theater System

Runco CL-500のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- CL-500の取扱説明書
- Runcoの製品カード
- パンフレット
- またはRunco CL-500の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Runco CL-500の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Runco CL-500の取り付け説明書、サービスマニュアル、簡易説明書、またはRunco CL-500のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Runco CL-500の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Runco CL-500デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがRunco CL-500を使用するのを助ける技術的文書のことです。説明書は通常、全てのRunco CL-500ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Runcoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Runco CL-500の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははRunco CL-500の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Runco CL-500に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Runco CL-500デバイスの基本機能を使うにあたってのヒント。 Runco CL-500のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Runco CL-500に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるRunco CL-500のメーカー/サービスへの連絡先に関する情報。

Runco CL-500についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもRunco CL-500の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがRunco CL-500で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)