Alpine DVA-5205の取扱説明書

72ページ 1.79 mb
ダウンロード

ページに移動 of 72

Summary
  • Alpine DVA-5205 - page 1

    R DV A-5205 D VD/VIDEO CD/ CD PLA YER DIGITAL VIDEO • OWNER’S MANUAL (Page 2-67) Please read this manual- to maximize your enjoyment of the outstanding performance and feature capabilities of the equipment, then retain the manual for future reference. • MODE D’EMPLOI (Page 72-137) V euillez lire ce mode d’emploi pour tirer pleinement prof ...

  • Alpine DVA-5205 - page 2

    2 DO NO T DISASSEMBLE OR AL TER. Doing so may result in an accident, fire or electric shock. KEEP SMALL OBJECTS SUCH AS B A TTER Y OUT OF THE REA CH OF CHILDREN. Swallo wing them may result in serious injury . If sw allow ed, consult a ph ysician immediately . USE THE CORRECT AMPERE RA TING WHEN REPLA CING FUSES. Failure to do so may result in fire ...

  • Alpine DVA-5205 - page 3

    3 Caution Precautions This symbol means impor tant instructions. F ailure to heed them can result in injur y or proper ty damage. DO NO T BLOCK VENTS OR RADIA T OR P ANELS. Doing so ma y cause heat to build up inside and ma y result in fire. DO NO T MIX NEW B A TTERIES WITH OLD BA TTERIES. INSERT WITH THE CORRECT B A TTER Y POLARITY . When inser ti ...

  • Alpine DVA-5205 - page 4

    4 Precautions T emperature Be sure the temperature inside the v ehicle is between +60 ° C (+140 ° F) and –10 ° C (+14 ° F) bef ore tur ning y our unit on. Moisture Condensation Y ou may notice the CD pla yback sound wav er ing due to condensation. If this happens, remov e the disc from the pla yer and w ait about an hour f or the moisture to ...

  • Alpine DVA-5205 - page 5

    5 SET UP Precautions W arnings and Cautions ............................... 2 Contents ...................................................... 5 Quick Guide About D VDs ................................................. 6 Discs play able on this D VD player ............... 7 When using remote control ......................... 8 Loading and unloading ...

  • Alpine DVA-5205 - page 6

    6 About DVDs Music CDs and D VDs have g roov es (tracks) in which the digital data is recorded. The data is represented as microscopic pits recorded into the track – these pits are read b y a laser beam to play the disc. On D VDs, the density of the tracks and pits is twice that of CDs , so D VDs can contain more data in less space. A 12 cm disc ...

  • Alpine DVA-5205 - page 7

    7 Discs playable on this DVD player Discs playable on this DVD player • Playable discs The discs listed below can be pla yed on this D VD play er . Other discs cannot be play ed. VIDEO CD DIGITAL VIDEO * Two-layer DVD disc compatible Mark (logo) Recorded content Disc size Max. playing time One-sided disc Approx. 4 hours One-sided disc Approx. 80 ...

  • Alpine DVA-5205 - page 8

    8 DV D / A UDIO When using remote control Replacing the batteries Opening the battery cover Push on the cov er and slide it as indicated by the arrows then the co ver will be removed. Closing the cover Push the cov er in the arrow direction until a click is heard. Note: Use two AA size batteries. When using remote contr ol • Changing Switch T o o ...

  • Alpine DVA-5205 - page 9

    9 DVD OPEN POWER DVD OPEN POWER DVD OPEN POWER DVD Loading and unloading discs T urn on the power before loading and unloading discs . (Refer to page 10 “T ur ning the power on and off ”.) Loading discs Press the door in gently then slide it downwards. Insert the disc with the side containing words or diagrams facing upwards. Once the disc is p ...

  • Alpine DVA-5205 - page 10

    10 Stopping playback Press the stop button during playback to stop playback. That position is stored in the memory . DVD CD Video CD Press “ L ” during playback. • Using the PRE-STOP function When the PRE-STOP function is used, the position at which playback is stopped is stored in the memory, and pla yback resumes from that position. Press ? ...

  • Alpine DVA-5205 - page 11

    11 Press NTSC/P AL for at least 5 seconds. Switching between NTSC and P AL configuration Switch the video output configuration to NTSC or P AL according to the type of tele vision and the disc recording method. Notes: • NTSC is the standard and there is no need to change the setting. The system is set to NTSC at time of shipment from the factory ...

  • Alpine DVA-5205 - page 12

    12 Playing discs Playing discs Caution DVD CD Video CD DVD Video CD ∼ 、 Press “ : : : : : ” . Playbac k starts. • If a menu screen appears On D VDs and video CDs with playbac k control (PBC), menu screens ma y appear automati- cally . If this happens , perf orm the operation described below to star t pla yback. Note: F or many discs ...

  • Alpine DVA-5205 - page 13

    13 DVD menu Use the “Joystic k” or the number k eys (“0” to “9” and ”+10”) to select the desired item, then press “ENT” or “ : ”. Note: For some discs it is not possib le to select items from the menu screen using the number ke ys (“0” to “9” and ”+10”). SUB T . ON/OFF . AUDIO ANGLE OP/ CL 12 3 45 6 78 9 0 UP +10 ...

  • Alpine DVA-5205 - page 14

    14 Finding the begin- nings of chapters or tracks DVD CD Video CD During playback, press“ c ” or “ f ”. The chapter/track s witches each time the button is pressed, and playbac k of the selected chapter/track star ts. f : Press this to start playback from the beginning of the follo wing chapter or track. c : Press this to star t pla yback f ...

  • Alpine DVA-5205 - page 15

    15 Playing still frames (pausing) Frame-by-frame playback Slow motion playback Supplementary explanation “Chapters” are divisions of mo vies or musical selections on D VDs. “T racks” are divisions of movies or m usical selections on video and music CDs. Playing still frames (pausing) During playback, press “ ” once. Press “ : ” to r ...

  • Alpine DVA-5205 - page 16

    16 Searching by title number Use this function to easily find positions on the D VD using the D VD’ s title menu. Searching by title number During playback, press “GO TO”. The mode switches each time the button is pressed. Select “TITLE”. TITLE TIME Normal playback CHAPT (When title number 1 is input) Input the number of the title you wan ...

  • Alpine DVA-5205 - page 17

    17 Press “ : ” or “ENT”. Pla yback starts from the selected title number . or Searching directly by chapter or track number Use this function to easily mov e to the beginnings of the chapters or tracks on the disc. DVD CD Video CD During playback, press “GO TO”. The mode s witches each time the button is pressed. Select “CHAPT” or ? ...

  • Alpine DVA-5205 - page 18

    18 Searching by elapsed time Searching by elapsed time Use this function to search by specifying the elapsed time. DVD CD Video CD During playback, press “GO TO”. The mode s witches each time the button is pressed. Select “TIME”. Input the elapsed time from which you want to start playback using the number keys (“0” to “9” and “+1 ...

  • Alpine DVA-5205 - page 19

    19 Chapter/track/title repeat playback Switching the audio language Press “ : ” or “ENT”. Pla yback starts from the specified elapsed time. Chapter/track/ title repeat playback Use this function to pla y the disc’ s titles, chapters or tracks repeatedly . During playback, press “RPT”. The repeat mode s witches each time the button is ...

  • Alpine DVA-5205 - page 20

    20 Switching the angle Switching the subtitles (subtitle language) Switching the angle With D VDs on which images photo- graphed from multiple angles are recorded, the angle can be s witched during playbac k. DVD During playback, press “ANGLE” for at least 2 seconds. The angle switches betw een the angles recorded on the disc each time the butt ...

  • Alpine DVA-5205 - page 21

    21 Displaying the subtitles Displaying the disc status Displaying the subtitles With D VDs on which subtitles are recorded, you can select whether to displa y the subtitles or not during playbac k. During playback, press “– ON/OFF” for at least 2 seconds. The currently displa yed subtitles are turned on and off each time the button is pressed ...

  • Alpine DVA-5205 - page 22

    22 Displaying the disc status Displaying the disc status Use the procedure described below to display the status (track n umber , etc.) of the currently playing video CD or music CD on the screen. During playback, press “DISP .”. The playbac k status is display ed. Note: F or music CDs, the pla ying status is display ed e ven when “DISP . ” ...

  • Alpine DVA-5205 - page 23

    23 V ideo output ON/OFF V ideo output ON/OFF (Only when CV A-1005/IV A-C800 is connected) When this unit is used with the CV A-1005/ IV A-C800 + the TME-M750 (Extra Monitor for Rear Seat), the D VD video can be viewed independently of what’ s being viewed on the CV A-1005/IV A-C800. For e xample, D VD video can be moni- tored on the Rear Monitor ...

  • Alpine DVA-5205 - page 24

    24 SET UP Changing the default settings (setup) The factory default settings can be changed to suit your personal prefer- ences and usage. Changing the default settings (setup) Changing the language settings In the stop mode, press “SET” for at least 2 seconds. The default setting men u appears. Use the “Joystick” to make the selection, the ...

  • Alpine DVA-5205 - page 25

    25 SET UP SET UP Use the “Joystick” to make the selection, then press “ENT”. SUBTITLE MENU LANGU A GE MENU LANGU A GE (menu languages) Set the audio language produced from the speakers . Set the language of the subtitles dis- pla yed on the screen. Set the language used f or the menus (title menu, etc.). The setup screen for the selected la ...

  • Alpine DVA-5205 - page 26

    26 SET UP Changing the TV screen settings Use the procedure described below to set the output screen according to the type of TV monitor being used. Changing the TV screen settings Select “TV SCREEN” under “Changing the default settings (SET UP)” on page 24. 4 : 3 P AN-SCAN Use the “Joystick” to make the selection, then press “ENT”. ...

  • Alpine DVA-5205 - page 27

    27 SET UP SET UP Select this when connected to a wide screen TV . This is selected upon shipment from the factory . 16 : 9 WIDE Notes: • For some discs, the picture ma y not be set to the selected screen size. (For details , refer to the explanation on the disc’ s jacket.) • Press “R TN” to return to the previous screen. Press “SET” f ...

  • Alpine DVA-5205 - page 28

    28 SET UP Use keys “0” to “9” to input the 4- digit password. The passw ord is set to 1111 is upon shipment from the factory . Input numbers are display ed “ ”. Setting the rating level (parental lock) Use this function to restrict the viewing of movies to children of appropriate age lev els only . Setting the rating level (parental loc ...

  • Alpine DVA-5205 - page 29

    29 SET UP SET UP Use the “Joystick” to select the rating level, then press “ENT”. Select “OFF” to cancel the parental lock or if you do not w ant to set a r ating le v el. The higher the number , the higher the rating le vel. Note: Press “R TN” to return to the previous screen. Press “SET” for at least 2 seconds. The settings ar ...

  • Alpine DVA-5205 - page 30

    30 SET UP The digital signals recorded on the D VD disc with 96K/24bit, 48K/24bit, 48K/20bit sampling are conv er ted into digital signals with 48K/16bits sampling for output from the optical cable. The digital signals recorded on the D VD disc with 96K/24bit, 48K/24bit, 48K/20bit sampling are not conv er ted into digital signals with 48K/16bits sa ...

  • Alpine DVA-5205 - page 31

    31 SET UP SET UP Press “SET” for at least 2 seconds. The settings are stored and the set up mode is canceled. Displays the setting contents . Note: Press “R TN” to return to the previous screen. Changing the down sampling setting ...

  • Alpine DVA-5205 - page 32

    32 SET UP Changing the digital output setting Use the following procedure to set the audio signal output from the D V A-5205. Changing the digital output setting Select “DIGIT AL OUT” under “Changing the default settings (SET UP)” on page 24. Use the “Joystick” to make the selection, then press “ENT”. AU TO LPCM The digital output i ...

  • Alpine DVA-5205 - page 33

    33 SET UP SET UP Note: Press “R TN” to return to the previous screen. Press “SET” for at least 2 seconds. The set up are stored and the set up mode is canceled. Changing the digital output setting Displays the setting contents . • Audio output/Optical digital audio output Disc DV D Video CD CD Audio recording format DTS Dolby Digital Line ...

  • Alpine DVA-5205 - page 34

    34 SET UP Changing the LED indicator setting Changing the LED indicator setting Use the follo wing procedure to set whether or not the product’ s LED indicators are on or off. Select “LED INDICA TOR” under “Changing the default settings (SET UP)” on page 24. Use the “Joystick” to select the “ON” or “OFF”, then press “ENT”. ...

  • Alpine DVA-5205 - page 35

    35 SET UP SET UP Custom setting – Changing the Closed Caption setting D VD includes so-called “closed captions” which describe the scene to persons with impaired hearing. It is possible to turn the closed captions ON and OFF . Custom setting – Changing the Closed Caption Select “CUSTOM SETUP” under “Changing the default settings (SET ...

  • Alpine DVA-5205 - page 36

    36 SET UP Custom setting – Changing the Ai-NET settings The Ai-NET settings are used to output the sound of connected Ai-NET products. Custom setting – Changing the Ai-NET settings Select “CUSTOM SETUP” under “Changing the default settings (SET UP)” on page 24. Use the “Joystick” to select “Ai- NET SETUP”, then press “ENT”. ...

  • Alpine DVA-5205 - page 37

    37 SET UP SET UP DV D CD Set to “D VD” when connected to the CV A-1005/ IV A-C800. Operations can be performed using the CV A- 1005/IV A-C800’s main men u screen. F or details, ref er to the operating instructions of the CV A-1005/IV A-C800. “D VD” is selected upon shipment from the factory . Set to “CD” when connected to an Ai-NET pr ...

  • Alpine DVA-5205 - page 38

    38 SET UP Custom setting – Changing the H.U. CONTROL settings When connecting this equipment with an Ai-NET compatible head unit or an Ai- NET compatible A V head unit (CV A-1005/ IV A-C800), set the equipment so that it is possible to control from the head unit. Select “CUSTOM SETUP” under “Changing the default settings (SET UP)” on page ...

  • Alpine DVA-5205 - page 39

    39 SET UP SET UP Custom setting – Changing the H.U. CONTROL settings OFF ON P ossib le to operate from an Ai-NET compatible head unit or an Ai-NET compatible A V head unit (CV A-1005/IV A- C800). Not possible to operate from an Ai-NET compatible head unit or an Ai-NET compatible A V head unit (CV A-1005/IV A- C800). Set to OFF at time of shipment ...

  • Alpine DVA-5205 - page 40

    40 Operating the digital audio processor (optional) When used with a digital audio processor (PXA- H510), operation is possible from the remote control unit included with the D V A-5205. Also refer to the PXA-H510’ s operating instructions. DVD CD Video CD During playback, press “A.PROC”. The setting menu appears. Use the “Joystick” to ma ...

  • Alpine DVA-5205 - page 41

    41 Adjusting the parametric equalizer Adjusting the parametric equalizer Select “P ARAMETRIC-EQ” under “Operating the digital audio processor (optional)” on page 40. Use the “Joystick” to select the band to be set, then press “ENT”. The band whose frequency is indicated in yello w can be adjusted. The par ametric equalizer’ s sett ...

  • Alpine DVA-5205 - page 42

    42 Adjusting the surround settings This adjustment is not possible when Dolby Digital or Pro Logic is turned on for the D V A- 5205’ s audio output. Adjusting the surround settings Select “SURROUND” under “Operating the digital audio processor (optional)” on page 40. Use the “Joystick” to select the surround mode, then press “ENT” ...

  • Alpine DVA-5205 - page 43

    43 Use the “Joystick” to adjust the time, then press “ENT”. Note: Press “R TN” to return to the previous screen. Press “A.PROC” to close the digital audio processor screen and return to the play- back screen. Storing the surround settings DVD CD Video CD Select “PRIV A TE-MEMOR Y” under “Operating the digital audio processor ( ...

  • Alpine DVA-5205 - page 44

    44 DVD CD Video CD Recalling the surround settings Recalling the surround settings Use the “Joystick” to select the number of the settings you wish to recall (“PRIV A TE-MEMOR Y 1” to “PRIV A TE-MEMOR Y 6”), then press “ENT”. Note: Press “R TN” to return to the previous screen. Press “A.PROC” to close the digital audio proce ...

  • Alpine DVA-5205 - page 45

    45 DVD CD Video CD DVD CD Video CD Adjusting the time compensation Use the “Joystick” to select the speaker to be adjusted, then press “ENT”. Adjusting the time compensation Using the Pro Logic mode Select “TIME-CORRECTION” under “Operating the digital audio processor (optional)” on page 40. Use the “Joystick” to adjust the time ...

  • Alpine DVA-5205 - page 46

    46 DVD CD Video CD ADJUST – Setting the speaker mode This adjustment cannot be made when Dolby Pro Logic is set to “OFF”. ADJUST – Setting the speaker mode Select “ADJUST” under “Operat- ing the digital audio processor (optional)” on page 40. Use the “Joystick” to switch the mode. Note: Press “R TN” to return to the previous ...

  • Alpine DVA-5205 - page 47

    47 DVD CD Video CD Press “A.PROC” to close the digital audio processor screen and return to the play- back screen. ADJUST – Adjusting the acoustic image This adjustment cannot be made when Dolby Pro Logic is set to “OFF”. Select “ADJUST” under “Operat- ing the digital audio processor (optional)” on page 40. Use the “Joystick” ...

  • Alpine DVA-5205 - page 48

    48 DVD CD Video CD ADJUST – Mixing the rear audio channels Use this function to mix the audio signals for the front to those output from the rear speakers. ADJUST – Mixing the rear audio channels Select “ADJUST” under “Operat- ing the digital audio processor (optional)” on page 40. Use the “Joystick” to select the mode (“ON” or ...

  • Alpine DVA-5205 - page 49

    49 DVD CD Video CD Use the “Joystick” to adjust the level, then press “ENT”. Note: Press “R TN” to return to the previous screen. Press “A.PROC” to close the digital audio processor screen and return to the play- back screen. ADJUST – Center speaker time compensation ADJUST – Center speaker time compensation Compensation is not ...

  • Alpine DVA-5205 - page 50

    50 DVD CD Video CD ADJUST – Rear speaker time compensation Compensation is not possible when the rear speakers are set to “OFF”. Select “ADJUST” under “Operat- ing the digital audio processor (optional)” on page 40. Use the “Joystick” to adjust the level, then press “ENT”. Note: Press “R TN” to return to the previous scree ...

  • Alpine DVA-5205 - page 51

    51 DVD CD Video CD ADJUST – Achieving powerful sound at low volumes This setting is only possible with Dolb y Digital outputs. ADJUST – Achieving powerful sound at low volumes Select “ADJUST” under “Operat- ing the digital audio processor (optional)” on page 40. Use the “Joystick” to select the mode. For powerful sound at low volume ...

  • Alpine DVA-5205 - page 52

    52 DVD CD Video CD ADJUST – Adjusting the speaker level ADJUST – Adjusting the speaker level Select “ADJUST” under “Operat- ing the digital audio processor (optional)” on page 40. Use the “Joystick” to select “TEST TONE”, then press “ENT”. Use the “Joystick” to select “ON”, then press “ENT”. T est tones are produ ...

  • Alpine DVA-5205 - page 53

    53 DVD CD Video CD Use the “Joystick” to select the speaker , then press “ENT”. Adjust so that the volume le vel from the diff erent speakers is the same. Use the “Joystick” to adjust the level, then press “ENT”. Note: Press “R TN” to return to the previous screen. Once the levels of all the speakers have been adjusted, either s ...

  • Alpine DVA-5205 - page 54

    54 DVD CD Video CD MODE – Adjusting the subwoofer MODE – Adjusting the subwoofer Select “MODE” under “Operating the digital audio processor (optional)” on page 40. Use the “Joystick” to select the mode (“ON” or “OFF”), then press “ENT”. Note: The subwoof er cannot be adjusted when set to “OFF”. Use the “Joystick” ...

  • Alpine DVA-5205 - page 55

    55 DVD CD Video CD Use the “Joystick” to adjust the level, then press “ENT”. MODE – T urning the defeat function on and of f Note: Press “R TN” to return to the previous screen. Press “A.PROC” to close the digital audio processor screen and return to the play- back screen. MODE – T urning the defeat function on and off Select ? ...

  • Alpine DVA-5205 - page 56

    56 Operating from the head unit Operating from the head unit The D V A-5205 can also be operated from the head unit. This section describes operations from the CD A-7965 (the recommended head unit). Note that some of the functions cannot be operated from the D V A-5205. CD A-7965 (head unit) D V A-5205 (player) Playing DVDs, video CDs and CDs Press ...

  • Alpine DVA-5205 - page 57

    57 Operating from the head unit Displaying the CD title Press “TITLE” to display the CD title , etc., on the head unit’ s display . Press “TITLE” on the head unit. The displa y pattern changes each time the button is pressed. SOURCE TITLE RPT f c : / j Rotar y Encoder T ur ns the pow er on and off. When pressed again, the source switches ...

  • Alpine DVA-5205 - page 58

    58 Operating from the head unit’ s remote control unit The D V A-5205 can be operated from the remote control unit included with the head unit. Operating from the head unit’ s remote control unit Remote control operations P10 P14 P15 P14 P ower on/off Fast-forward/fast-reverse Still picture (pause) Chapter/track search O O O O Operation Remote ...

  • Alpine DVA-5205 - page 59

    59 RUE-4185 RUE-4160 RUE-4165 Operating from the head unit’ s remote control unit Operating DVDs, video CDs and CDs First see “Remote control operations” (page 58). Press “SOURCE” , “AUDIO SEL” or “A. SEL”to set the CD (DV A-5205) mode. The D V A-5205’ s power is on when the CD mode is selected, off when other modes are selected ...

  • Alpine DVA-5205 - page 60

    60 T erminology Dolby Digital (AC-3) Dolby Digital (A C-3) is a digital audio compression technology dev eloped by Dolby Labor atories. It is compatible with not only stereo (2-channel) sound, but also 5.1-channel surround sound. The signals for the diff erent channels are completely independent, so large quanti- ties of audio data can be recorded ...

  • Alpine DVA-5205 - page 61

    61 List of language codes (F or details, see page 25.) List of language codes Abbreviation AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DA DE DZ EL EN EO ES ET EU FA FI FJ FO FR FY GA GD GL GN GU HA HI HR HU Language Afar Abkhazian Afrikaans Amharic Arabic Assamese A ymara Azerbaijani Bashkir Belorussian Bulgarian Bihari Bislama Beng ...

  • Alpine DVA-5205 - page 62

    62 List of language codes (Continued) (For details , see page 25.) List of language codes Abbreviation PS PT QU RM RN RO RU RW SA SD SG SH SI SK SL SM SN SO SQ SR SS ST SU SV Language P ashto , Pushto P or tuguese Quechua Rhaeto-Romance Kirundi Romanian Russian Kiny arwanda Sanskrit Sindhi Sangho Serbo-Croatian Singhalese Slov ak Slov enian Samoan ...

  • Alpine DVA-5205 - page 63

    63 Abbreviation AD AE AF AG AI AL AM AN AO AQ AR AS AT AU AW AZ BA BB BD BE BF BG BH BI BJ BM BN BO BR BS BT BV BW BY BZ CA CC CD CF CG CH CI CK Country Andorra United Arab Emirates Afghanistan Antigua and Barbuda Anguilla Albania Armenia Netherlands Antilles Angola Antarctica Argentina American Samoa A ustria A ustralia Aruba Azerbaijan Bosnia and ...

  • Alpine DVA-5205 - page 64

    64 Abbreviation GS GT GU GW GY HK HM HN HR HT HU ID IE IL IN IO IQ IR IS IT JM JO JP KE KG KH KI KM KN KP KR KW KY KZ LA LB LC LI LK LR Country South Georgia and the South Sandwich Islands Guatemala Guam Guinea-Bissau Guyana Hong K ong Heard Island and McDonald Islands Honduras Croatia Haiti Hungar y Indonesia Ireland Israel India British Indian Oc ...

  • Alpine DVA-5205 - page 65

    65 Abbreviation PH PK PL PM PN PR PT PW PY QA RE RO RU RW SA SB SC SD SE SG SH SI SJ SK SL SM SN SO SR ST SV SY SZ TC TD TF TG TH Country Philippines P akistan P oland Saint Pierre and Miquelon Pitcairn Puer to Rico P or tugal P alau P aragua y Qatar Reunion Romania Russian Feder ation Rwanda Saudi Arabia Solomon Islands Seychelles Sudan Sweden Sin ...

  • Alpine DVA-5205 - page 66

    66 In case of dif ficulty • If operation freezes, the screen goes b lack or the unit should otherwise not function properly , try tur ning the power off then bac k on. Alter natively , tr y the follo wing methods in the order listed until the D V A-5205 returns to nor mal pla ybak mode: 1) Change the source from D VD to another source then retur ...

  • Alpine DVA-5205 - page 67

    67 Specifications Signal system .................................... NTSC/P AL Horizontal resolution ......................... 500 lines or greater Video output le vel .............................. 1Vp-p (75 ohms) Video S/N ratio .................................. DVD: 60 dB Audio S/ N ratio DVD: 95 dB CD: 93 dB Frequency response ................ ...

  • Alpine DVA-5205 - page 68

    68 Functions of remote control unit buttons SOURCE BAND POWER V . SEL DISC SUB T . ON/OFF AUDIO ANGLE CHG DEFEA T MUTE DISP LIST MENU SLOW GO TO SET TITLE RTN V .OUT V O L D N V O L U P A. PROC DISP . TUNER NTSC/PAL A. PROC BAND ENT RPT DN CLR UP +10 OP/ CL 12 3 45 6 78 9 0 1 2 3 4 5 6 7 8 9 p u i o ; y s a t r e w q Operating the DV A-5205 DVD V i ...

  • Alpine DVA-5205 - page 69

    69 Functions of remote control unit buttons 9 RPT Button Repeat pla yback. p POWER Button T ur ns the po wer ON and OFF . NTSC/P AL Button Press f or at least 5 seconds to change between NTSC and P AL. q DVD/AUDIO Switch Used to s witch between D VD and Audio oper ation. w GO TO Button Used to go directly to star t of selec- tion. TITLE Button Pres ...

  • Alpine DVA-5205 - page 70

    70 Functions of remote control unit buttons SOURCE BAND POWER V . SEL DISC SUB T . ON/OFF AUDIO ANGLE CHG DEFEA T MUTE DISP LIST MENU SLOW GO TO SET TITLE RTN V .OUT V O L D N V O L U P A. PROC DISP . TUNER NTSC/PAL A. PROC BAND ENT RPT DN CLR UP +10 OP/ CL 12 3 45 6 78 9 0 1 2 3 4 5 6 7 8 9 p u i o ; y s a t r e w q 1 Joy Stick Music Sensor/F ast ...

  • Alpine DVA-5205 - page 71

    71 Memo ...

  • Alpine DVA-5205 - page 72

    R Alpine Electronics, Inc. T okyo office: 1-1-8 Nishi Gotanda, Shinagaw a-ku, T okyo 141-8501, J apan T el.: (03) 3494-1101 Alpine Electronics of America, Inc. 19145 Gramercy Place, T orrance, California 90501, U .S.A. T el.: 1-800-ALPINE-1 (1-800-257-4631) Alpine Electronics of Canada, Inc. Suite 203, 7300 W arden A ve. Markham, Ontario L3R 9Z6, C ...

メーカー Alpine カテゴリー DVD Player

Alpine DVA-5205のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- DVA-5205の取扱説明書
- Alpineの製品カード
- パンフレット
- またはAlpine DVA-5205の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Alpine DVA-5205の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Alpine DVA-5205の取り付け説明書、サービスマニュアル、簡易説明書、またはAlpine DVA-5205のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Alpine DVA-5205の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Alpine DVA-5205デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがAlpine DVA-5205を使用するのを助ける技術的文書のことです。説明書は通常、全てのAlpine DVA-5205ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Alpineの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Alpine DVA-5205の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははAlpine DVA-5205の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Alpine DVA-5205に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Alpine DVA-5205デバイスの基本機能を使うにあたってのヒント。 Alpine DVA-5205のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Alpine DVA-5205に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるAlpine DVA-5205のメーカー/サービスへの連絡先に関する情報。

Alpine DVA-5205についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもAlpine DVA-5205の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAlpine DVA-5205で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)