Black Box AC400Aの取扱説明書

41ページ 0.46 mb
ダウンロード

ページに移動 of 41

Summary
  • Black Box AC400A - page 1

    CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mail order: Black Box Corporation , 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.com • E-mail: info@blackbox.com SEPTEMBER ...

  • Black Box AC400A - page 2

    1 REAL COLOR AND MONOCHROME 16 LCD PROJECTION P ANELS FEDERAL COMMUNICA TIONS COMMISSION RADIO FREQUENCY INTERFERENCE ST A TEMENT This equipment generates, uses, and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communi ...

  • Black Box AC400A - page 3

    2 REAL COLOR AND MONOCHROME 16 LCD PROJECTION P ANELS TRADEMARKS UL ® is a registered trademark of Underwriters Laboratories Incorporated. Macintosh ® and Apple ® are registered trademarks of Apple Computer, Inc. IBM ® and PS/2 ® are registered trademarks of IBM Corporation. MS-DOS ® is a registered trademark of Microsoft Corporation. Compaq ...

  • Black Box AC400A - page 4

    3 REAL COLOR AND MONOCHROME 16 LCD PROJECTION P ANELS Contents Chapter Page 1. Specifications.................................................................................................. 4 2. Introduction ................................................................................................... 5 2.1 Description ...................... ...

  • Black Box AC400A - page 5

    4 REAL COLOR AND MONOCHROME 16 LCD PROJECTION P ANELS 1. Specifications Resolution — 640 x 480 Power — UL ® approved 12 VDC, 1.5A power supply Size — 15.3"H x 13.1"W x 2.6"D (38.9 x 33.3 x 6.6 cm) Weight — 5.9 lb. (2.7 kg) ...

  • Black Box AC400A - page 6

    5 CHAPTER 2: Introduction 2. Introduction Fig. 2-1. The Projection Panel on an Over head Projector . 2.1 Description For remarkably impressive presentations, use the Real Color or Monochrome 16 LCD Projection Panel. The Panel, which projects 16 real colors or 16 shades of grey, delivers the computer compatibility and ease of use you never thought p ...

  • Black Box AC400A - page 7

    6 REAL COLOR AND MONOCHROME 16 LCD PROJECTION P ANELS The Projection Panel is easy to use. Simply connect the Panel to a computer graphics card and place the unit onto an ordinary overhead projector. The data and graphics normally displayed on the computer monitor will be projected in images that you can easily see in typical room lighting. The Pro ...

  • Black Box AC400A - page 8

    7 CHAPTER 2: Introduction 2.3 General Guidelines Follow these guidelines when you use the Projection Panel. • Be sure the Projection Panel is on whenever the overhead projector is turned on. CAUTION If the Projection Panel is not on when it is on top of an operating overhead pro- jector, the Panel could sustain damage. • Do not use the Projecti ...

  • Black Box AC400A - page 9

    8 REAL COLOR AND MONOCHROME 16 LCD PROJECTION P ANEL 3. Installation Fig. 3-1. Projection Panel and Over head Projector , Showing Cable Connections. 3.1 Setup Instructions This chapter explains the connections you must make between the three pieces of equipment you will be using—the Projection Panel, your computer, and monitor. Be sure to follow ...

  • Black Box AC400A - page 10

    9 CHAPTER 3: Installation 3.1.1 C ABLES Three cables are supplied with the Projection Panel: 1. A Macintosh II/Macintosh LC/Apple IIGS loop-through cable 2. A VGA/MCGA loop-through cable 3. A loop-through cable for EGA, CGA, or Macintosh video Fig. 3-2. Cables. 15-pin VGA 9-pin VGA 15-pin MacII The cables that come with your Projection Panel are us ...

  • Black Box AC400A - page 11

    10 REAL COLOR AND MONOCHROME 16 LCD PROJECTION P ANEL 10 3.1.2 C ONNECTING THE P ROJECTION P ANEL TO Y OUR C OMPUTER You are going to make eithertwo or three connections. You will connect the computer’s graphics card to the Projection Panel, the Projection Panel to the wall outlet with the power supply, and, optionally, the Projection Panel to th ...

  • Black Box AC400A - page 12

    11 CHAPTER 3: Installation 11 Fig. 3-3. Selecting the Proper “Y” Cable for Y our Computer . 6. Unplug the computer monitor cable from the graphics card. Plug the monitor to the short end (marked Monitor) of the Projection Panel cable to the computer monitor. 7. Plug the long end of the Projection Panel cable (marked for the appropriate computer ...

  • Black Box AC400A - page 13

    12 REAL COLOR AND MONOCHROME 16 LCD PROJECTION P ANEL 3.2 Connecting the Projection Panel to a Desktop Computer Figure 3-4 shows how to connect the Projection Panel to typical desktop computers, which include CGA, EGA, VGA, Macintosh II, and Macintosh LC setups. All cables are labeled (for example, LCD, Monitor, VGA, etc.) to indicate where they co ...

  • Black Box AC400A - page 14

    13 CHAPTER 3: Installation 3.3 Connecting the Projection Panel to an IBM PC Compatible Laptop Computer Figure 3-5 shows a typical laptop installation. Fig. 3-5. T ypical Laptop Installation. When the external port is activated, many laptop computers automatically turn off their internal display. For more information, see Appendix C or your computer ...

  • Black Box AC400A - page 15

    14 REAL COLOR AND MONOCHROME 16 LCD PROJECTION P ANEL 3.4 Connecting the Projection Panel to a Macintosh Series Computer Figure 3-6 shows how to connect the Projection Panel to a Macintosh series computer. Fig. 3-6. Macintosh Series Computer . Because classic-style Macintosh computers do not have a video connector, you must install an internal adap ...

  • Black Box AC400A - page 16

    15 CHAPTER 4: Operation 4. Operation Some of the buttons are auto- repeat buttons; that is, pressing and holding these buttons causes them to constantly send instructions. Other buttons toggle through a fixed number of settings and require you to press the button each time to trigger the next setting. 4.1 Adjusting the Projection Panel At this poin ...

  • Black Box AC400A - page 17

    16 REAL COLOR AND MONOCHROME 16 LCD PROJECTION P ANELS Fig. 4-1. Projection Panel Keypad. T able 4-1. Non-Shift and Shift Keys. NON-SHIFT SHIFT KEYS KEYS Tint (up/down) Level (up/down) Contrast (up/down) Sync+ Sync- Position (up/down) Position (left/right) Menu (toggle) Clear Reset Reverse Palette reset clear tint level position palette reverse syn ...

  • Black Box AC400A - page 18

    17 CHAPTER 4: Operation 4.2 Non-Shift Control Buttons To activate one of the non-shift buttons (printed in grey) on the operating control panel, just press the button. 4.2.1 T INT (T RUE C OLOR ) Press the Tint key to adjust the color. The Tint Up key adds red and green to the image. Blue levels are affected by a mix of red and green. Fig. 4-3. Con ...

  • Black Box AC400A - page 19

    18 REAL COLOR AND MONOCHROME 16 LCD PROJECTION P ANELS Projected characters or graphics may appear to shimmer because of differences in signal outputs of some computers. Press the Sync+ button until projected characters “lock” into position and shimmering is eliminated. Each time Sync+ is pushed, it fine- tunes the Projection Panel to match sig ...

  • Black Box AC400A - page 20

    19 CHAPTER 4: Operation Fig. 4-7. Clear . 4.2. R EVERSE If you wish to reverse the way you see an image, light letters on a dark background or dark letters on a light background, press the Reverse button. Pressing it again causes the display to return to the original image. All colors will be switched with their complements. See Appendix A for more ...

  • Black Box AC400A - page 21

    20 REAL COLOR AND MONOCHROME 16 LCD PROJECTION P ANELS 4.3.1 S YNC - Each time Sync- is pushed, it fine tunes the Projection Panel to match signals from the graphics system. Sync- continuously cycles backward through all 16 positions. 4.3.2 R ESET The master reset function, holding down the Shift button and pressing Reset , returns the display sett ...

  • Black Box AC400A - page 22

    21 CHAPTER 4: Operation Fig. 4-11. Reset. 4.3.3 P ALETTE Pressing the Palette button selects the displayed color palette size. This button allows you to switch between 8-color and 16-color displays on the Real Color Panel and select one of seven, color-to-greyshade mappings on the Monochrome panel. 4.3.4 L EVEL U P AND L EVEL D OWN The Level button ...

  • Black Box AC400A - page 23

    22 REAL COLOR AND MONOCHROME 16 LCD PROJECTION P ANELS Fig. 4-13. Level Up and Level Down. 4.3.5 M ENU Pressing the Menu control displays the User Menu, which allows you to adjust the initial color balance and tracking, change the text mode and language, and flip the projection image. The User Menu also provides information about the video input. A ...

  • Black Box AC400A - page 24

    23 CHAPTER 4: Operation NOTE The Projection Panel must be placed correctly on the overhead projector. Incorrect placement may cause the Projection Panel to project blurry or mis-converged images. For more infor- mation, see Appendix A. 4. Press Sync until the image is locked in as a solid image with no shimmer or movement. This button toggles throu ...

  • Black Box AC400A - page 25

    24 REAL COLOR AND MONOCHROME 16 LCD PROJECTION P ANELS 4.6 Moving Through the User Menu After you display the User Menu, use the Position control buttons (left and right) to move within and between option columns. These keys are auto-repeat buttons; that is, pressing and holding these buttons causes them to constantly send instructions. Tint/.Contr ...

  • Black Box AC400A - page 26

    25 CHAPTER 4: Operation If the colors still need adjustment, follow these steps and use the red and green adjustments to fine-tune the panel: 1. Move the green bar down until you have a rich red and a solid black. 2. Move the red bar down until you have a rich, true green. If cyan turns green, the green bar turns brown, and the white turns magenta, ...

  • Black Box AC400A - page 27

    26 REAL COLOR AND MONOCHROME 16 LCD PROJECTION P ANELS 4.7.4 V IDEO /N O V IDEO The Video column provides information about the current video input. If video is not present, the User Menu displays “No Video,” with no Horizontal or Mode information and the test pattern or blank screen visible in the image area. The Video information column shows ...

  • Black Box AC400A - page 28

    27 CHAPTER 4: Operation Fig. 4-17. Rear Projection. Selecting ON for the Text Mode locks VGA text to solid pixels (no shimmering). CGA graphics, however, may be compressed. Unless you regularly project CGA graphics with the Projection Panel, text mode should be set to ON. Text Mode works only when text is present. For example, this mode works in VG ...

  • Black Box AC400A - page 29

    28 REAL COLOR AND MONOCHROME 16 LCD PROJECTION P ANELS 5. Maintenance and T roubleshooting 2. If the surface needs cleaning, you can use any normal non- abrasive glass cleaner on it. Apply the cleaner to a cleaning cloth and then wipe the surface lightly. Do not use excessive amounts of liquid. Do not use abrasive cleaners, solvents, or other harsh ...

  • Black Box AC400A - page 30

    29 CHAPTER 5: Maintenance and T roubleshooting 2. Gently remove the filter and clean it by washing it in gentle soap. Be sure to let the filter dry completely before re-inserting it in the Projection Panel. The frequency with which you will need to clean the filter depends on how often you use the Panel. Typically, you will need to clean the filter ...

  • Black Box AC400A - page 31

    30 REAL COLOR AND MONOCHROME 16 LCD PROJECTION P ANELS • The power supply may not be plugged into a live AC outlet. Check to ensure that the power supply is connected to the Projection Panel and to a live AC wall outlet. • Your power supply may be plugged into a power strip that is not turned on. • Your overhead projector may not be set up co ...

  • Black Box AC400A - page 32

    31 CHAPTER 5: Maintenance and T roubleshooting Problem : Image is out of focus. Possible Causes and Solutions : • Overhead is not adjusted correctly. Adjust overhead until image is in focus. • The surface of the Projection Panel or overhead projector may need cleaning. Problem : Vertical lines or bleeding. Possible Causes and Solutions : • Ad ...

  • Black Box AC400A - page 33

    32 REAL COLOR AND MONOCHROME 16 LCD PROJECTION P ANELS A. W orking With Colors (AC400A only) 1. Apply power to the Projection Panel, but do not connect a video cable to it. 2. Place the Projection Panel on your projector and turn the projector on. A test pattern consisting of a series of color bars and a line grid should appear. 3. Looking at the p ...

  • Black Box AC400A - page 34

    33 APPENDIX B: Interface Requirements B. Inter face Requirements T able B-1. Pin Assignments for the 26-pin connector . Input Pin Signal Description Output Pin 1 Vertical sync 10 2 Horizontal sync 11 8 Blue analog 14 6 Intensity TTL 12 7 Green TTL 13 9 Red analog 15 16 Blue TTL 3 17 Red TTL 4 18 Green analog 5 20, 21 GND 22 GND 23 Key (TTL/analog s ...

  • Black Box AC400A - page 35

    34 REAL COLOR AND MONOCHROME 16 LCD PROJECTION P ANELS B.1 Power Connector Polarity The power connector on your Projection Panel uses the polarity shown in Fig. B-1. Fig. B-1. Power Connector Polarity . The Projection Panel is shipped with a 12-Volt, 1.5-Amp power supply designed to work specifically with the Projection Panel. Many portable compute ...

  • Black Box AC400A - page 36

    35 APPENDIX B: Interface Requirements Fig. B-2. Macintosh Display . T able B-2. Common Computer Monitors and Their Screen Areas. Computer Monitor Projection Panel Screen Area AT&T, CGA 640 x 400 pixels EGA 640 x 350 pixels Macintosh 512 x 342 pixels Macintosh II, VGA 640 x 480 pixels Macintosh LC 512 x 384 pixels 640 pixels 512 pixels 480 pixel ...

  • Black Box AC400A - page 37

    36 REAL COLOR AND MONOCHROME 16 LCD PROJECTION P ANELS C. Special Guidelines for IBM and Compatibles For most IBM and IBM compatibles: 1. Follow the instructions for setting up the Projection Panel. 2. Insert your MS-DOS disk in drive A. (Skip this step if you have a hard drive.) 3. When the DOS prompt appears, type MODE CO80 (CO for color, the num ...

  • Black Box AC400A - page 38

    00 APPENDIX C: Special Guidelines for IBM and Compatibles 37 C.2 Instructions for Activating Portables and Laptops Refer to Table C-1 for commands to activate or de-activate the Projection Panel. T able C-1. Por table and Laptop Activation Char t. Computer Activate Port De-activate Video Model Command Command Standard Compaq ® portable II Ctrl Alt ...

  • Black Box AC400A - page 39

    T able C-1 (continued). Por table and Laptop Activation Char t. Computer Activate Port De-activate Video Model Command Command Standard Toshiba 3100-e Ctrl Alt End Ctrl Alt Home EGA Toshiba 3100sx Active Port N/A VGA Toshiba 3200sx Active Port N/A VGA Toshiba 3200 Fn End Fn Home EGA Toshiba 5100 Ctrl Alt End Ctrl Alt Home EGA Toshiba 5100/100 Activ ...

  • Black Box AC400A - page 40

    39 Index Numbers 512x342 pixels, 15 640 by 480 pixels, 36 640x480 pixel display, 7 C CGA, 7, 10,, 18, 28 E EGA, 7, 10,, 18, 21, 26 M MCGA, 10, 24 MS DOS, 38 R RGB, 7 V VGA, 7, 10, 13, 18, 22, 24, 26, 28 ...

  • Black Box AC400A - page 41

    1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746 © Copyright 1993. Black Box Corporation. All rights reserved. ...

メーカー Black Box カテゴリー Projection Television

Black Box AC400Aのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- AC400Aの取扱説明書
- Black Boxの製品カード
- パンフレット
- またはBlack Box AC400Aの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Black Box AC400Aの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Black Box AC400Aの取り付け説明書、サービスマニュアル、簡易説明書、またはBlack Box AC400Aのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Black Box AC400Aの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Black Box AC400Aデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがBlack Box AC400Aを使用するのを助ける技術的文書のことです。説明書は通常、全てのBlack Box AC400Aユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Black Boxの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Black Box AC400Aの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははBlack Box AC400Aの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Black Box AC400Aに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Black Box AC400Aデバイスの基本機能を使うにあたってのヒント。 Black Box AC400Aのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Black Box AC400Aに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるBlack Box AC400Aのメーカー/サービスへの連絡先に関する情報。

Black Box AC400Aについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもBlack Box AC400Aの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがBlack Box AC400Aで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)