-
Porter-Cable BN125A - page 1
BRAD NAILER Instruction manual The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for futur e refer ence. Model No. ______________________________________ T ype ___________________________________________ Serial No. _______________________________________ IMPORT ANT Please ...
-
Porter-Cable BN125A - page 2
IMPORT ANT SAFETY INSTRUCTIONS WARNING: When using pneumatic tools, basic safety precautions should always be followed to reduce the risk of personal injury , including the following: READ AND FOLLOW ALL INSTRUCTIONS. There ar e certain applications for which this tool was designed. Porter -Cable strongly r ecommends that this tool NOT be modified ...
-
Porter-Cable BN125A - page 3
3 8. DISCONNECT TOOL FROM AIR SUPPL Y HOSE before doing tool maintenance, clearing a jammed fastener , leaving work area, moving tool to another location, or handing the tool to another person. 9. NEVER USE A TOOL that is leaking air , has missing or damaged parts, or requir es repair . Make sure all screws and caps ar e securely tightened. 10. NEV ...
-
Porter-Cable BN125A - page 4
Fig. 12 Fig. 13 Fig. 13A 4 16 . REMOVE FINGER FROM TRIGGER when not driving fasteners. Never carry tool with finger on trigger: tool may fire a fastener if safety is bumped while trigger is depressed. Fig. 10. 17 . DON’T OVERREACH. Keep proper footing and balance at all times when using or handling the tool. Fig. 11. 18 . FIRE F ASTENERS INTO WOR ...
-
Porter-Cable BN125A - page 5
5 EMPLOYER’S RESPONSIBILITIES Employer must enforce compliance with the safety warnings and all other instructions contained in this manual. Keep this manual available for use by all people assigned to use this tool. For personal safety and proper operation of this tool, r ead and follow all of these instructions carefully . OPERA TING INSTRUCTIO ...
-
Porter-Cable BN125A - page 6
Fig. 16 Fig. 17 ← 6 PREP ARING THE TOOL 1. After reading and understanding this entir e manual, connect tool to air supply . CAUTION: Keep tool pointed away fr om yourself and others at all times. Always connect tool to air supply before loading fasteners. Do not load fasteners with trigger or safety depressed. Only use approved Porter -Cable fas ...
-
Porter-Cable BN125A - page 7
7 T o fire, grip tool firmly , position nose of tool onto work surface, push forward on tool to depress safety , and squeeze trigger to fire a fastener . This “trigger fire” method pr ovides the most accurate fastener placement. This tool is shipped from the factory with a “r estrictive fire trigger” that only allows the tool to be fired th ...
-
Porter-Cable BN125A - page 8
8 CLEARING A JAMMED F ASTENER 1. CAUTION: Disconnect tool fr om air supply . 2. Open magazine and remove any r emaining fasteners. CAUTION: Remove fasteners from tool before opening the fastener guide plate. Fasteners are under pr essure and may shoot out of magazine which could cause injury . 3. Depress the quick r elease latch and open the fasten ...
-
Porter-Cable BN125A - page 9
9 MAINTENANCE CLEAN AND INSPECT DAIL Y CAUTION: Disconnect tool from air supply before cleaning and inspection.Correct all pr oblems before placing the tool back in use. Wipe tool clean and inspect for wear or damage. Use non-flammable cleaning solutions to wipe exterior of tool only if necessary . DO NOT SOAK tool with cleaning solutions. Such sol ...
-
Porter-Cable BN125A - page 10
10 PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter -Cable warrants its nailing and stapling tools for a period of one year from the date of original purchase. W e will repair or replace at our option, any part or parts of the pr oduct and accessories covered under this warranty which, after examination, proves to be defective in workmanship or materi ...
-
Porter-Cable BN125A - page 11
The following are trademarks of PORTER-CABLE Corporation (Las siguientes son mar cas registradas de PORTER-CABLE S.A.) (Les mar q ues suivantes sont des marques de fabriquant de la PORTER-CABLE Corporation): BAMMER ® , LASERLOC ® , OMNIJIG ® , POCKET CUTTER ® , PORT A-BAND ® , PORT A-PLANE ® , PORTER-CABLE ® , QUICKSAND ® , SANDTRAP ® , SA ...
Porter-Cable BN125Aについてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもPorter-Cable BN125Aの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPorter-Cable BN125Aで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。