Cisco Systems 78-16409-03の取扱説明書

24ページ 0.72 mb
ダウンロード

ページに移動 of 24

Summary
  • Cisco Systems 78-16409-03 - page 1

    A-1 Cisco ASA 5500 Series Hardwa re Installation Guide 78-16409-03 APPENDIX A Maintenance and Upgrade Procedures This appendix describes ho w to install and replace t he Cis co S ec ur it y S er vi ce s Mod ul es ( SS M) , the chassis cov er , the power supp ly , and the CompactFlash . This appendix includes the follo wing sections: • Installing ...

  • Cisco Systems 78-16409-03 - page 2

    A-2 Cisco ASA 5500 Series Hard ware Installation Guide 78-16409-03 Appendix A Maintenance a nd Upgrade Procedures Installing and Replacing the 4GE SSM Overview Figure A-1 lists the 4GE SSM ports and LEDs. Figur e A -1 4GE SSM P orts and LEDs Note Figure A-1 sho ws SFP modules installed in the ports slots. Y ou must order and install the SFP modules ...

  • Cisco Systems 78-16409-03 - page 3

    A-3 Cisco ASA 5500 Series Hardware Installation Guide 78-16409-03 Appendix A Maintenance and Upgrad e Procedures Installing and Replacing the 4GE SSM Installing the 4G E S SM T o install a ne w 4G E SS M for the first time, perform the f ollowing steps: Step 1 Po wer off the adap tive secu rity appliance. Step 2 Locate the grounding strap from the ...

  • Cisco Systems 78-16409-03 - page 4

    A-4 Cisco ASA 5500 Series Hard ware Installation Guide 78-16409-03 Appendix A Maintenance a nd Upgrade Procedures Installing and Replacing the 4GE SSM Replacing the 4G E S SM T o replace an existing 4G E SS M, perform the following steps: Step 1 Enter the hw-mod mod 1 shut command in privile ged EXEC mode. V erify that the mod ule is down by making ...

  • Cisco Systems 78-16409-03 - page 5

    A-5 Cisco ASA 5500 Series Hardware Installation Guide 78-16409-03 Appendix A Maintenance and Upgrad e Procedures Installing and Replacing the 4GE SSM SFP Module The adaptiv e security appliance use s a f ield-re place able SFP module to establish Gig abit connections. Note I f you install an SFP mo dule after the switc h has powered on, you must re ...

  • Cisco Systems 78-16409-03 - page 6

    A-6 Cisco ASA 5500 Series Hard ware Installation Guide 78-16409-03 Appendix A Maintenance a nd Upgrade Procedures Installing and Replacing the 4GE SSM Installing the SFP Module T o install the SFP module in the 4G E SSM, perform the foll owing steps: Step 1 Line up the SFP module with the port and slide the SFP module into the port sl ot until it l ...

  • Cisco Systems 78-16409-03 - page 7

    A-7 Cisco ASA 5500 Series Hardware Installation Guide 78-16409-03 Appendix A Maintenance and Upgrad e Procedures Installing and Replacing the 4GE SSM Removing the SFP Module The SFP modules hav e different t ypes of latching de vices used to detach th e SFP module from a port. The follo wing are the dif ferent types of modules: • Mylar T ab Modul ...

  • Cisco Systems 78-16409-03 - page 8

    A-8 Cisco ASA 5500 Series Hard ware Installation Guide 78-16409-03 Appendix A Maintenance a nd Upgrade Procedures Installing and Replacing the ASA SSM 10/20 Installing and Replacing the ASA SSM 10/20 This section describes how to install and replace the ASA SSM 10/20 in the adaptiv e security applia nce. This section includes the following topics: ...

  • Cisco Systems 78-16409-03 - page 9

    A-9 Cisco ASA 5500 Series Hardware Installation Guide 78-16409-03 Appendix A Maintenance and Upgrad e Procedures Installing and Repl ac ing the ASA SSM 10/20 Installing an ASA SSM 10/20 T o install a ne w ASA SSM for the f irst time, perform t he following step s: Step 1 Po wer off the adap tive secu rity appliance. Step 2 Locate the grounding stra ...

  • Cisco Systems 78-16409-03 - page 10

    A-10 Cisco ASA 5500 Series Hard ware Installation Guide 78-16409-03 Appendix A Maintenance a nd Upgrade Procedures Removing and Replac ing the Chassis Cover Replacing an ASA SSM 10/20 T o replace an existing ASA SSM, perform the follo wing steps: Step 1 Enter the hw-mod mod 1 shut command in pri vileged EXEC mode. V erify if the modu le is down b y ...

  • Cisco Systems 78-16409-03 - page 11

    A-11 Cisco ASA 5500 Series Hardware Installation Guide 78-16409-03 Appendix A Maintenance and Upgrad e Procedures Removing and Replacing the Chassis Cover Step 3 Remove the scre ws from the top of the chassis ( Figure A-9 ). Figure A -9 Removing the T op P ane l Scr ews Step 4 Pull the top panel up as sho wn in Figure A-10 . Put the panel in a safe ...

  • Cisco Systems 78-16409-03 - page 12

    A-12 Cisco ASA 5500 Series Hard ware Installation Guide 78-16409-03 Appendix A Maintenance a nd Upgrade Procedures Removing and Replac ing the Chassis Cover Replacing the Chassis Cover Caution Do not operate the adaptiv e security appliance with out the cha ssis cov er insta lled. The chassis cov er protects the internal components , preven ts elec ...

  • Cisco Systems 78-16409-03 - page 13

    A-13 Cisco ASA 5500 Series Hardware Installation Guide 78-16409-03 Appendix A Maintenance and Upgrad e Procedures Working in an ESD Environmen t Working in an ESD Environment Electrostatic discharge (ESD) can damage equipment an d impair elec trical circuitry . ESD damage occurs when electronic components are improp erly handled and can result in c ...

  • Cisco Systems 78-16409-03 - page 14

    A-14 Cisco ASA 5500 Series Hard ware Installation Guide 78-16409-03 Appendix A Maintenance a nd Upgrade Procedures Removing and Replacing the Power Supply Step 6 Lift the rear of the chassis from the surface and unscrew both the scre ws th at se cu res t he p ow er s upply to the chassis, as s h own i n Figure A-13 . Figure A -13 Remo ving the Po w ...

  • Cisco Systems 78-16409-03 - page 15

    A-15 Cisco ASA 5500 Series Hardware Installation Guide 78-16409-03 Appendix A Maintenance and Upgrad e Procedures Removing and Rep lacing the Power Supply Step 9 Remov e the po wer supply brace by pul ling it up and then out as sho wn in Figure A-15 . Figure A -15 Remo ving the Po wer Supply Step 10 From the back of the chassis, push the power supp ...

  • Cisco Systems 78-16409-03 - page 16

    A-16 Cisco ASA 5500 Series Hard ware Installation Guide 78-16409-03 Appendix A Maintenance a nd Upgrade Procedures Removing and Replacing the Power Supply Replacing the AC Power Supply T o replace the A C po wer supply , perform the follo wing steps: Step 1 Insert the ne w po wer supply into place and slide it to wards the back of the adap tiv e se ...

  • Cisco Systems 78-16409-03 - page 17

    A-17 Cisco ASA 5500 Series Hardware Installation Guide 78-16409-03 Appendix A Maintenance and Upgrad e Procedures Installing the DC Mode l Installing the DC Model War ni n g Before performing any of the following procedu res, ensure that power is removed from the DC circuit. T o ensure that all power is OFF , locate the circuit breaker o n the pane ...

  • Cisco Systems 78-16409-03 - page 18

    A-18 Cisco ASA 5500 Series Hard ware Installation Guide 78-16409-03 Appendix A Maintenance a nd Upgrade Procedures Installing the DC Model Step 6 The adapti ve security appliance i s equipped with two ground ing holes at the side of the chassis, whi ch you can use to connect a tw o-hole grounding lug to th e adapti ve security appliance. Use 8-32 s ...

  • Cisco Systems 78-16409-03 - page 19

    A-19 Cisco ASA 5500 Series Hardware Installation Guide 78-16409-03 Appendix A Maintenance and Upgrad e Procedures Removing and Replacin g the CompactFlash Step 11 Replace the DC power supply plastic shied. Step 12 Po wer on the adaptiv e security appliance fro m the switch at the rear of the cha ssis. Note If you need to power c ycle the DC adaptiv ...

  • Cisco Systems 78-16409-03 - page 20

    A-20 Cisco ASA 5500 Series Hard ware Installation Guide 78-16409-03 Appendix A Maintenance a nd Upgrade Procedures Removing and Replac ing the CompactFlash Step 6 Carefully slide the CompactFlash out of its connector as shown in Figure A-19 . The CompactFlash has a lip on its lower edge, which you can use to grip the Compact Flash. Otherwise, use s ...

  • Cisco Systems 78-16409-03 - page 21

    A-21 Cisco ASA 5500 Series Hardware Installation Guide 78-16409-03 Appendix A Maintenance and Upgrad e Procedures Removing and Replacin g the CompactFlash Replacing the System CompactFlash T o replace the system CompactFla sh, perform the following steps: Step 1 Align the ne w system CompactFlash with the connect or on the riser card. Step 2 Push t ...

  • Cisco Systems 78-16409-03 - page 22

    A-22 Cisco ASA 5500 Series Hard ware Installation Guide 78-16409-03 Appendix A Maintenance a nd Upgrade Procedures Removing and Replac ing the CompactFlash Removing the User CompactFlash T o remov e the user CompactFlash, perform the following steps: Step 1 Locate the user Compact Flash in its slot in the rear panel of the chassis. Step 2 Press the ...

  • Cisco Systems 78-16409-03 - page 23

    A-23 Cisco ASA 5500 Series Hardware Installation Guide 78-16409-03 Appendix A Maintenance and Upgrad e Procedures Removing and Replacin g the CompactFlash Replacing the User CompactFlash T o replace the user CompactFlash , perform the following steps: Step 1 Locate the user CompactFlash slot in the rear pane l of the chassis. See Figure A-22 . Figu ...

  • Cisco Systems 78-16409-03 - page 24

    A-24 Cisco ASA 5500 Series Hard ware Installation Guide 78-16409-03 Appendix A Maintenance a nd Upgrade Procedures Removing and Replac ing the CompactFlash ...

メーカー Cisco Systems カテゴリー Saw

Cisco Systems 78-16409-03のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 78-16409-03の取扱説明書
- Cisco Systemsの製品カード
- パンフレット
- またはCisco Systems 78-16409-03の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Cisco Systems 78-16409-03の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Cisco Systems 78-16409-03の取り付け説明書、サービスマニュアル、簡易説明書、またはCisco Systems 78-16409-03のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Cisco Systems 78-16409-03の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Cisco Systems 78-16409-03デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCisco Systems 78-16409-03を使用するのを助ける技術的文書のことです。説明書は通常、全てのCisco Systems 78-16409-03ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Cisco Systemsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Cisco Systems 78-16409-03の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCisco Systems 78-16409-03の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Cisco Systems 78-16409-03に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Cisco Systems 78-16409-03デバイスの基本機能を使うにあたってのヒント。 Cisco Systems 78-16409-03のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Cisco Systems 78-16409-03に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCisco Systems 78-16409-03のメーカー/サービスへの連絡先に関する情報。

Cisco Systems 78-16409-03についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもCisco Systems 78-16409-03の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCisco Systems 78-16409-03で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)