Cisco Systems 78-16845-01の取扱説明書

68ページ 0.68 mb
ダウンロード

ページに移動 of 68

Summary
  • Cisco Systems 78-16845-01 - page 1

    CHAPTER 3-1 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 3 Building the Network After you hav e planned your network, you can begin b uilding the network components: groups, netw ork partitions, subnetworks, NEs, links, and network maps. This chapter contains the following sections: • 3.1 Overvie w , page 3-1 • 3.2 Ho w Do I Build ...

  • Cisco Systems 78-16845-01 - page 2

    3-2 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.2 How Do I Build Groups? • Links—Physical or logical entities (for example, a f iber) between two physical points (for example, ports). Circuits are provisioned through links. • Network Maps—Geographic representation of the NEs in the domain, the ...

  • Cisco Systems 78-16845-01 - page 3

    3-3 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.2.3 Moving Groups Note A group cannot be pasted into the Discov ered NEs or Deleted NEs group. Ti p The drag-and-drop feature can also be used to copy groups. Hold do wn the Ctrl ke y and use the mouse to drag and drop the group to a new location. Since ...

  • Cisco Systems 78-16845-01 - page 4

    3-4 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.3 How Do I Build Network Partitions? 3.2.4.2 Deleting Multiple Groups Step 1 In the Domain Explorer tree, select the group to be deleted. Select multiple groups by pressing the Ctrl key , then click each group that will be deleted. Step 2 Y ou can delete ...

  • Cisco Systems 78-16845-01 - page 5

    3-5 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.3.2 Modifying Network Partitions Step 4 Click OK . The ne w network partition appears in the Subnetwork Explorer tree. 3.3.2 Modifying Network Partitions Step 1 In the Domain Explorer window , choose File > Subnetwork Explorer . The Subnetwork Explore ...

  • Cisco Systems 78-16845-01 - page 6

    3-6 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.4 How Do I Build Subnetworks? Step 3 In the conf irmation dialog box, click Ye s . The netw ork partition is removed from the Subnetw ork Explorer tree. 3.4 How Do I Build Subnetworks? Subnetworks are sets of NEs interconnected at a specif ic network lay ...

  • Cisco Systems 78-16845-01 - page 7

    3-7 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.4.2 Moving Subnetworks Note The Add New Subnetw ork feature is not av ailable for users with the Assign NEs property (Provisioner , Operator , and custom user prof iles) because they cannot see the entire domain. 3.4.2 Moving Subnetworks A subnetwork can ...

  • Cisco Systems 78-16845-01 - page 8

    3-8 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.1 Prerequisites for Adding NEs 3.5.1 Prerequisites for Adding NEs Before adding a new NE, you must enable the NE service for that NE. The NE service is enabled by default, b ut the service is not started as a process unless you activ ate an NE for that ...

  • Cisco Systems 78-16845-01 - page 9

    3-9 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.1 Prerequisites for Adding NEs Note T o add an ONS 15302 or ONS 15305 NE to CTM, its SNMP Users table must contain the following ro w: 0.0.0.0 public true where, public is the community string. In addition, to obtain the trap e vents from the NE, the C ...

  • Cisco Systems 78-16845-01 - page 10

    3-10 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.1 Prerequisites for Adding NEs – T rap port: 162 – V ersion: v1 – Community string: Same as on the GNE Note If there is a direct connection from the ENE to GNE, it becomes the Relay A NE. If there are intermediate NEs between the ENE and GNE, th ...

  • Cisco Systems 78-16845-01 - page 11

    3-11 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.1 Prerequisites for Adding NEs T o add entries to the SNMP Community String table: Step 1 In the Domain Explorer window , choose Administration > ONS 155XX > ONS 155XX SNMP Settings T able . The SNMP Community String table opens. T able 3-5 prov ...

  • Cisco Systems 78-16845-01 - page 12

    3-12 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.1 Prerequisites for Adding NEs 3.5.1.4.3 Topology Setup Appropriate topology information must be conf igured on ONS 15501, ONS 15530, and ONS 15540 NEs for automatic discov ery of neighbors and discovery of ph ysical links. For the ONS 15530 and ONS 1 ...

  • Cisco Systems 78-16845-01 - page 13

    3-13 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.1 Prerequisites for Adding NEs For NEs with OSC, additional conf iguration is required. Add patches between the W ave and OSC f ilter interfaces. For e xample, if the W ave 0 interf ace is connected physically to the OSC f ilter 0/0 interface, add a p ...

  • Cisco Systems 78-16845-01 - page 14

    3-14 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.1 Prerequisites for Adding NEs • Create a username and password with appropriate pri vileges. • After conf iguring the NE, add a seed NE to CTM. CTM automatically discovers the interconnected CRS-1 or XR 12000 NEs. Note The CRS-1 and XR 12000 disc ...

  • Cisco Systems 78-16845-01 - page 15

    3-15 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.1 Prerequisites for Adding NEs T o conf igure the SNMP community string, you must change the community strings on the de vices through the CLI. T able 3-6 describes the various options in volved in conf iguring SNMP . 3.5.1.8.2 Setting Up Nonstandard ...

  • Cisco Systems 78-16845-01 - page 16

    3-16 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.1 Prerequisites for Adding NEs where ro is the SNMP get community string and rw is the SNMP set only community string. Step 3 Enter the following command to conf igure the SNMP get community string: xxyyzz% cnfsnmp community public ro xxyyzz% Step 4 E ...

  • Cisco Systems 78-16845-01 - page 17

    3-17 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.2 Adding NEs Step 1 Open a terminal window and SSH or T elnet to the switch. Step 2 Enter the cnfpasswd command to change the service-lev el password for all nodes. The follo wing example is sho wn: xxyyzz.7.PXM.a > xxyyzz.7.PXM.a > cnfpasswd En ...

  • Cisco Systems 78-16845-01 - page 18

    3-18 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.2 Adding NEs Note If you click Finish in this window , Cisco default values will be assigned to the remaining f ields. Step 4 Enter the following information. Fields sho wn depend on the NE type. a. NE ID Note • Do not use “CTM” as an NE ID beca ...

  • Cisco Systems 78-16845-01 - page 19

    3-19 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.2 Adding NEs Step 10 V erify that the NE software version is listed in the Supported NE table (Domain Explorer > Administration > Supported NE T able). If it is not listed, see 4.3.7 Adding a New NE Software V ersion to the CTM Domain, page 4-37 ...

  • Cisco Systems 78-16845-01 - page 20

    3-20 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.2 Adding NEs h. Location name i. Subnetwork ID j. Network Partition ID Caution Make sure to specify the correct partition. If the wrong partition is specif ied, the new NE is not added and an error message appears. Step 5 Click Next if you are adding ...

  • Cisco Systems 78-16845-01 - page 21

    3-21 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.2 Adding NEs IP Address (for single NE additions) Enter a unique IP address for the NE. It must be in the form ddd.ddd.ddd.ddd , where ddd is a decimal octet expressed as an inte ger between 0 and 255. The f irst octet cannot be a zero. Note Prior to ...

  • Cisco Systems 78-16845-01 - page 22

    3-22 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.2 Adding NEs Note • For CTM to communicate with certain NE types, you must set the username and passw ord that the CTM server uses to establish a session with the NE. T o enter user information, choose Administration > Control P anel > Securit ...

  • Cisco Systems 78-16845-01 - page 23

    3-23 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.3 Copying an NE from One Group to Another 3.5.3 Copying an NE from One Group to Another Groups for multiple users can easily be created in CTM. Just copy the same NE into dif ferent groups. Step 1 In the Domain Explorer tree, select the NE to be copie ...

  • Cisco Systems 78-16845-01 - page 24

    3-24 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.5 Moving an NE from One Network Partition to Another 3.5.5 Moving an NE from One Network Partition to Another Caution CTM cannot manage circuits across network partitions. Make sure that all connected NEs are managed under the same network partition. ...

  • Cisco Systems 78-16845-01 - page 25

    3-25 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.7 Deleting NEs Step 3 Click Sav e . Note If a topological link is deleted while NEs are automatically grouped in subnetworks, CTM deletes isolated NEs, creates a new subnetw ork, and mov es the deleted NEs to the new subnetw ork. If a topological link ...

  • Cisco Systems 78-16845-01 - page 26

    3-26 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.7 Deleting NEs Note If a CTC-based NE is deleted and then DCC connectivity to the deleted NE is remo ved, CTM redisco vers the deleted NE. If DCC connectivity is remo ved befor e deleting the NE, CTM does not rediscover the NE. Therefore, remov e DCC ...

  • Cisco Systems 78-16845-01 - page 27

    3-27 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.7 Deleting NEs Aside from using the Domain Explorer to remov e an out-of-service NE from the database, you can also use the prune_ne.sh script. Note Shut down the CTM serv er and all CTM clients before running the prune_ne.sh script. Step 1 In the Dom ...

  • Cisco Systems 78-16845-01 - page 28

    3-28 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.5.8 Restoring a Deleted NE Note • W ait until all records associated with the NE are deleted from the database before adding the NE back again. • The amount of time it takes to prune NEs depends on the amount of data that needs to be remov ed, the a ...

  • Cisco Systems 78-16845-01 - page 29

    3-29 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.6.1 Setting Up ONS 15501, ONS 15530, and ONS 15540 NEs for Link Discovery Note An autodiscov ered link between two TPs will ov erride previously autodisco vered links and an y manual links on any of the TPs. Note Links are not supported for the Catalyst ...

  • Cisco Systems 78-16845-01 - page 30

    3-30 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.6.2 Overview of Supported Links Links between TXP_MR_2.5G, TXPP_MR_2.5G, MXP_2.5G_10G, TXP_MR_10G, 2.5G_DM, 2.5G_DMP , TXP_MR_10E, MXP_MR_10E cards or DWDM cards are manually created and cannot be automatically discov ered. They can be created if: • T ...

  • Cisco Systems 78-16845-01 - page 31

    3-31 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.6.2 Overview of Supported Links ONS 15600 SONET ONS 15600 SDH ONS 15216 ONS 15302 ONS 15305 ONS 15310 ONS 15327 ONS 15454 ONS 15600 ONS 15800 ONS 15801 ONS 15808 CRS-1 CRS-1 ONS 15327 ONS 15454 SONET ONS 15454 SDH XR 12000 XR 12000 ONS 15327 ONS 15454 S ...

  • Cisco Systems 78-16845-01 - page 32

    3-32 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.6.2 Overview of Supported Links ONS 15305 STM-1 XX STM-4 XX STM-16 XX ONS 15310 PoS X CTX (OC-3 port) XX CTX (OC-12 port) XX ONS 15327 OC-3/STM-1 XX OC-12/STM-4 XX OC-48/STM-16 XX E10/100-4 X G1000-2 X ONS 15454 SONET and ONS 15454 SDH OPT -BST XX 32MUX ...

  • Cisco Systems 78-16845-01 - page 33

    3-33 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.6.2 Overview of Supported Links ONS 15530 Nonsplitter 2.5 Gbps ITU T runk XX Nonsplitter 10 Gbps ITU T runk XX Splitter 10 Gbps ITU T runk XX 10 Gbps Uplink X OADM XX ONS 15540 T ype 1 single-mode T ransponder xx.x XX T ype 1 multi-mode T ransponder xx. ...

  • Cisco Systems 78-16845-01 - page 34

    3-34 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.6.3 Viewing the Link Table 3.6.3 Viewing the Link Table The Link table sho ws information about each link attribute. Use the Link table to vie w , modify , and delete links. Y ou can open the Link table for the CTM domain, network partition, subnetwork, ...

  • Cisco Systems 78-16845-01 - page 35

    3-35 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.6.3 Viewing the Link Table T able 3-10 describes the f ields in Link table. T able 3-1 0 Field Descr iptions for the Link T able Field Description Link Alarm Se verity Highest se verity alarm associated with the selected link. Link Source ID ID of the l ...

  • Cisco Systems 78-16845-01 - page 36

    3-36 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.6.3 Viewing the Link Table Is Link V alid V alidity of the link. V alues are V alid or In valid. For autodiscov ered links, the value is V alid if both the terminating NEs are in service and the NEs are able to conf irm the presence of the link. An auto ...

  • Cisco Systems 78-16845-01 - page 37

    3-37 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.6.4 Filtering the Link Table 3.6.4 Filtering the Link Table Step 1 In the Link table, choose File > Filter . The Filter dialog box opens. Step 2 Specify the f ilter parameters described in T able 3-11 . Step 3 Click OK to run the f ilter . 3.6.5 Filt ...

  • Cisco Systems 78-16845-01 - page 38

    3-38 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.6.6 Creating Links • OMS • OCH • SONET/SDH • Layer 2 • Layer 3 Note When you customize the location of the NE icons in the Network Map, make sure to tak e account of the NEs that you cannot see due to the layer rate that you selected. If you c ...

  • Cisco Systems 78-16845-01 - page 39

    3-39 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.6.6 Creating Links Note The layer details displayed in the link creation wizard are based on the NE selected as source of the link. For e xample, when you attempt to create a link from NE A to NE B, the link sizes displayed are based on the supported si ...

  • Cisco Systems 78-16845-01 - page 40

    3-40 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.6.6 Creating Links Note A PTP can be associated with only one bidirectional link or two unidirectional links at a particular layer rate for all NEs except Not Managed/Other V endor NEs. For Not Managed/Other V endor NEs, a PTP can terminate in only one ...

  • Cisco Systems 78-16845-01 - page 41

    3-41 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.6.6 Creating Links Direction Specify whether the link is unidirectional or bidirectional. F or the ONS 15501, ONS 15800, ONS 15801, and ONS 15808, only unidirectional links are av ailable. Provision T ype Specify the type of link provisioning. V alues a ...

  • Cisco Systems 78-16845-01 - page 42

    3-42 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.6.7 Modifying Links Note • Once the links are created, each link will hav e a dif ferent color notation depending on the alarm status of the PTP on which the link is created. Links between Not Managed/Other V endor NEs are always black. The color of t ...

  • Cisco Systems 78-16845-01 - page 43

    3-43 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.6.7 Modifying Links Note T able 3-14 describes the f ields in the Modify Link wizard. Step 1 Open the Modify Link wizard using one of the following methods: • In the Link table, select a link and choose Edit > Modify Link . • In the Network Map, ...

  • Cisco Systems 78-16845-01 - page 44

    3-44 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.6.8 Deleting Links 3.6.8 Deleting Links Y ou can delete one or multiple links from the Link table. Y ou can delete a single link from the Network Map. Step 1 In the Link table, select one or multiple links and choose Edit > Delete Link (or click the ...

  • Cisco Systems 78-16845-01 - page 45

    3-45 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.6.10 Filtering the Link Utilization Table Depending on the number of provisioned circuits, the consumed bandwidth is totaled. Circuits such as V AP/LAP and virtual trib utary (VT) tunnel are preprovisioned and are not included in the calculation. This i ...

  • Cisco Systems 78-16845-01 - page 46

    3-46 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.7 How Do I Use Network Maps? 3.7 How Do I Use Network Maps? The Network Map is or ganized into a multilev el hierarchy that corresponds to the structure of the Domain Explorer and Subnetwork Explorer trees. The Network Map hierarch y consists of managem ...

  • Cisco Systems 78-16845-01 - page 47

    3-47 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.7.1 Customizing a Network Map Step 2 Use the Edit menu in the Network Map windo w to customize the Network Map. Edit menu options include: • Enable Drag—Enables the drag-and-drop functionality . • Enable Of fview—Enables the display of of f-vie ...

  • Cisco Systems 78-16845-01 - page 48

    3-48 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.7.2 Viewing a Node in the Network Map c. In the Domain Management area, click the T runcate Network Map Node Name First Characters or T runcate Network Map Node Name End Characters radio button. d. Click Sa ve . 3.7.2 Viewing a Node in the Network Map I ...

  • Cisco Systems 78-16845-01 - page 49

    3-49 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.7.4 Modifying a Node Icon or a Map Background Image 3.7.4 Modifying a Node Icon or a Map Background Image Network map backgrounds are provided by def ault as part of CTM, and are used to display a geographical layout of the network. The icons in the Net ...

  • Cisco Systems 78-16845-01 - page 50

    3-50 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.7.5 Saving Changes to the Network Map f ind an icon in an unexpected position, the object most likely was ne ver positioned manually and sa ved and was therefore positioned automatically . T o f ix the icon location, manually mov e the object to the cor ...

  • Cisco Systems 78-16845-01 - page 51

    3-51 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.8.1 Discovering CTC-Based NEs Note The Discov ered Network Elements group can be vie wed only by users who hav e all NEs assigned to them. Therefore, in the Add New NE wizard, the grouping option “Group disco vered NEs in the Discov ered Network Eleme ...

  • Cisco Systems 78-16845-01 - page 52

    3-52 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.8.3 Rediscovering ONS 155xx, CRS-1, and XR 12000 NEs all types of discov ery: periodic rediscov ery , user-requested rediscov ery , and update-triggered discov ery . T o view the table, choose Conf iguration > ONS 155XX > Discovery Inf o T able in ...

  • Cisco Systems 78-16845-01 - page 53

    3-53 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.8.4 Resetting the Resync Interval Note This command is unav ailable unless at least one NE in the selection is in the In Service or Under Maintenance state. Step 2 T o rediscover all ONS 155xx, CRS-1, or XR 12000 NEs in the network, choose Conf iguratio ...

  • Cisco Systems 78-16845-01 - page 54

    3-54 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.9 How Do I Discover the Network for MGX Voice Gateway Devices? • Routing table and protocol information Step 1 In the Domain Explorer window , choose Administration > Control Panel . Step 2 Expand NE Service . Step 3 Select an NE and change the Res ...

  • Cisco Systems 78-16845-01 - page 55

    3-55 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.9.1 Discovering NEs 3.9.1 Discovering NEs The network discov ery service in CTM collects information from indi vidual NEs, discov ers new NEs added to the network, and computes network-le vel information, such as physical topology and discrepancies. Whe ...

  • Cisco Systems 78-16845-01 - page 56

    3-56 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.10.1 Synchronization Settings for the ONS 15310, ONS 15327, ONS 15454 SONET, and ONS 15600 SONET Note Alarms relating to PM collection indicate that the load on the system is high. Reduce the load on the system before proceeding. 3.10.1.1 Setting Up Ext ...

  • Cisco Systems 78-16845-01 - page 57

    3-57 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.10.1 Synchronization Settings for the ONS 15310, ONS 15327, ONS 15454 SONET, and ONS 15600 SONET • Quality of RES—If the timing source supports the reserved S1 byte, set the timing quality here. (Most timing sources do not use RES.) Qualities are di ...

  • Cisco Systems 78-16845-01 - page 58

    3-58 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.10.1 Synchronization Settings for the ONS 15310, ONS 15327, ONS 15454 SONET, and ONS 15600 SONET – T iming Mode set to Line—Options are the node’ s working OC-N cards (non-DWDM nodes), OSC cards (D WDM nodes), and Internal Clock. Select the cards/ ...

  • Cisco Systems 78-16845-01 - page 59

    3-59 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.10.1 Synchronization Settings for the ONS 15310, ONS 15327, ONS 15454 SONET, and ONS 15600 SONET Step 1 Select an ONS 15310, ONS 15327, ONS 15454 SONET , or ONS 15600 SONET NE and choose Conf iguration > NE Explorer . Step 2 In the node property pane ...

  • Cisco Systems 78-16845-01 - page 60

    3-60 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.10.2 Synchronization Settings for the ONS 15454 SDH and ONS 15600 SDH 3.10.2 Synchronization Settings for the ONS 15454 SDH and ONS 15600 SDH SSM communicates information about the quality of the timing source. SSM messages are carried on the S1 byte of ...

  • Cisco Systems 78-16845-01 - page 61

    3-61 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.10.2 Synchronization Settings for the ONS 15454 SDH and ONS 15600 SDH • Re verti ve—If checked, the NE re verts to a primary reference source after the conditions that caused it to switch to a secondary timing reference are corrected. • Re version ...

  • Cisco Systems 78-16845-01 - page 62

    3-62 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.10.2 Synchronization Settings for the ONS 15454 SDH and ONS 15600 SDH Note Reference lists def ine up to three timing references for the node and up to six BITS Out references. BITS Out references def ine the timing references used by equipment attached ...

  • Cisco Systems 78-16845-01 - page 63

    3-63 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.10.2 Synchronization Settings for the ONS 15454 SDH and ONS 15600 SDH Note Refer to the Cisco ONS 15454 SDH T r oubleshooting Guide or Cisco ONS 15600 SDH T r oubleshooting Guide for timing-related alarms. 3.10.2.2 Setting Up Internal Timing for CTC-Bas ...

  • Cisco Systems 78-16845-01 - page 64

    3-64 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.11 How Do I Synchronize the Network for MGX Voice Gateway Devices? Step 6 Click A pply . Step 7 In the Domain Explorer tree, select the node that will be timed from the node that was set up in Steps 1 through 7 and choose Conf iguration > NE Explorer ...

  • Cisco Systems 78-16845-01 - page 65

    3-65 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.11.1 Viewing Clocking Sources 3.11.1.1 Configuring Global Clocking Step 1 In the Domain Explorer tree, select the node and choose Conf iguration > MGX V oice Gateway > Conf iguration Center . Step 2 Drag and drop the node from the Hierarchy pane t ...

  • Cisco Systems 78-16845-01 - page 66

    3-66 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.12 How Do I Test Connectivity for Optical and Routing Devices? 3.11.1.4 Creating a Manual Clock Source T o create a manual clock source: Step 1 In the Domain Explorer , right-click the PNNI node from the Hierarchy pane and choose Conf iguration Center . ...

  • Cisco Systems 78-16845-01 - page 67

    3-67 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.12.1 Pinging an NE 3.12.1 Pinging an NE Step 1 In the Domain Explorer tree, select the NE to ping. Step 2 Choose F ault > Ping NE . The ping results include round-trip time and packet loss statistics. Step 3 Click OK in the dialog box. Note This func ...

  • Cisco Systems 78-16845-01 - page 68

    3-68 Cisco Transport Manager Release 6.0 User Guide 78-16845-01 Chapter 3 Building the Network 3.13 How Do I Test Connectivity for MGX Voice Gateway Devices? T esting NE connectivity occurs at the management protocol le vel (SNMP or CORB A). Step 1 In the Domain Explorer tree, select the MGX node and choose F ault > MGX V oice Gateway > Diagn ...

メーカー Cisco Systems カテゴリー Wheelchair

Cisco Systems 78-16845-01のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 78-16845-01の取扱説明書
- Cisco Systemsの製品カード
- パンフレット
- またはCisco Systems 78-16845-01の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Cisco Systems 78-16845-01の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Cisco Systems 78-16845-01の取り付け説明書、サービスマニュアル、簡易説明書、またはCisco Systems 78-16845-01のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Cisco Systems 78-16845-01の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Cisco Systems 78-16845-01デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCisco Systems 78-16845-01を使用するのを助ける技術的文書のことです。説明書は通常、全てのCisco Systems 78-16845-01ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Cisco Systemsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Cisco Systems 78-16845-01の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCisco Systems 78-16845-01の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Cisco Systems 78-16845-01に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Cisco Systems 78-16845-01デバイスの基本機能を使うにあたってのヒント。 Cisco Systems 78-16845-01のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Cisco Systems 78-16845-01に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCisco Systems 78-16845-01のメーカー/サービスへの連絡先に関する情報。

Cisco Systems 78-16845-01についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもCisco Systems 78-16845-01の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCisco Systems 78-16845-01で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)