日本語 dropdown-ico

Cisco Systems OL-12397-13の取扱説明書

34ページ 0.62 mb
ダウンロード

ページに移動 of 34

Summary
  • Cisco Systems OL-12397-13 - page 1

    CH A P T E R 2-1 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 2 SIP Subscribers Revised: April 1 7, 2008, OL-123 97-13 The Cisco BTS 10200 Softswitch su pports SIP subscr ibers on SI P phones that are comp liant with RFC 3261 or RFC 25 43. This section describes t he s upport for SIP subs cribers and ho w ...

  • Cisco Systems OL-12397-13 - page 2

    2-2 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Phone Initialization SIP Phone Initialization Figure 2-1 sho ws an example of SIP phone i nitialization on bootup, that is, ho w a typical phone might initialize itself an d establish its identit y with the BTS 10200. The image s ...

  • Cisco Systems OL-12397-13 - page 3

    2-3 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security When a SIP user attempts to regist er or set u p a call, the BTS 10200 challenges th e SIP subscribe r based on provisio ning in the Serving Domain Name table. If the Serving Do main Name table indicate ...

  • Cisco Systems OL-12397-13 - page 4

    2-4 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security T o enable or disable SECURE_FQDN on a successful registered subscriber 1. T ake A OR out of service to re mo ve all registered contact. 2. Enable or disabl e SECURE_FQDN for th e subscriber . 3. Bring A ...

  • Cisco Systems OL-12397-13 - page 5

    2-5 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security • The SECURE_FQDN in the A OR2SUB table is stored both in the OR A CLE da tabase and the shared memory . A OR2SUB records cannot be added or deleted dir ectly . T o add A OR2SUB records, you must spec ...

  • Cisco Systems OL-12397-13 - page 6

    2-6 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security change aor2sub aor-id=241-555-1018@s ia-SYS41CA146.ipclab.cisco.com; status=ins; Step 4 Reboot the ad apter device (such as A T A) for this subscr iber . Operations The system performs the f o llo wing c ...

  • Cisco Systems OL-12397-13 - page 7

    2-7 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security Call Processing The SIP application in the BTS 10200 implements the secure provisio ning feature for all incoming SIP messages (requests and responses) fro m SIP endpoints. When a SIP request message is ...

  • Cisco Systems OL-12397-13 - page 8

    2-8 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security 2. When a Contact header is pres en t on a reliable 1xx or 2xx response, the Contact FQDN/I P address of the response is verif ied to resolve to the Secure-IP1. If the address does not resolve properly , ...

  • Cisco Systems OL-12397-13 - page 9

    2-9 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP User Authentication SIP User Authentication The BTS 10200 can act as an authenti cation server . Authentication is en abled on the serving domain through pr ovisioning. Whene ver a SIP request is recei ved from a SIP subscr iber ...

  • Cisco Systems OL-12397-13 - page 10

    2-10 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Subscriber Calls Figure 2-2 sho ws how an inco ming request is processed, and indicates the role of the Aut hentication Service in the BTS 1 0200. Figur e 2-2 A uthentication and Pr ocessing of an Incomi ng Request (f or Example ...

  • Cisco Systems OL-12397-13 - page 11

    2-11 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Provisioning Session Timers for SIP Su bscribers Provisioning Session Timers for SIP Subscribers The system uses session timers to peri odically refresh SIP sessions during cal l processing or in-progress calls. Y ou can enable or ...

  • Cisco Systems OL-12397-13 - page 12

    2-12 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Diversion Indication for SIP Subs cribers Step 2 If not already d one, add a default sip-timer -profile-i d to the ca-conf ig table: add ca-config type=sip_timer_profile _id; datatype=string; value=<sip_timer_profile_id>; Dive ...

  • Cisco Systems OL-12397-13 - page 13

    2-13 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Comparison of SIP-Based Features and MGCP-Based Features Comparison of SIP-Based Features and MGCP-Based Features Ta b l e 2 - 1 lists the MGCP features av ailable (in the Feature column) and then descr ibes ho w the feature differ ...

  • Cisco Systems OL-12397-13 - page 14

    2-14 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Comparison of SIP-Based Features and MGCP-Based Fe atures Call Fo rward Busy 1 CFB Same as MGCP . Call Fo rward Busy V ariable Ac tiv ation CFBV A Single-stage digit collection. Call Fo rward Busy V ariable Deacti vation CFBVD Same ...

  • Cisco Systems OL-12397-13 - page 15

    2-15 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Comparison of SIP-Based Features and MGCP-Based Features Call W aiting Delu xe Interrogation CWDI V aries with phon e functionality . Calling Identit y Delive ry and Suppression (Deli very) 2 CIDSD Presentati on status from the pho ...

  • Cisco Systems OL-12397-13 - page 16

    2-16 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Comparison of SIP-Based Features and MGCP-Based Fe atures Distincti ve Ringing Call W aiting DRCW Provisioning for SIP does not differ from provisioning for MGCP . Howe ver , the deli very method for DRCW is di fferent. The subscrib ...

  • Cisco Systems OL-12397-13 - page 17

    2-17 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Comparison of SIP-Based Features and MGCP-Based Features Outgoing Call Barrin g Acti vation OCB A Single stage digit collection. Outgoing Call Barrin g Deactiv ation OCBD Single stage digit collection. Outgoing Call Barrin g Interr ...

  • Cisco Systems OL-12397-13 - page 18

    2-18 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Cisco BTS 10200 Softswitch-Based Features Softswitch-based features are di rectly provided b y the BTS 10200. SIP phones can provide some features on their own; for information on the featur ...

  • Cisco Systems OL-12397-13 - page 19

    2-19 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softsw itch-Based Features Call Forwarding The differences between the feature for SIP and the feature for MGCP are as follo ws: • There is no tone prov ided for SIP users to prompt for forwarding digi ts. The SIP ...

  • Cisco Systems OL-12397-13 - page 20

    2-20 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Note Forward ing to a URL address of record ( A OR) is not supported. SIP subscribers do not hear a f inal dial tone upon completing acti v ation or deacti vation. Instead, an announcement p ...

  • Cisco Systems OL-12397-13 - page 21

    2-21 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softsw itch-Based Features • If the calling number and name are a vailable and th e presentation indication of ei ther calling number or calling name is r estricted , the display name f ield of the From header is ...

  • Cisco Systems OL-12397-13 - page 22

    2-22 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Direct Outward Dialing W ith the Direct O utward Dialing (DOD) service, a s tat ion user can place external calls to the e xchange network with out attend ant assista nce by: 1. Dialing the ...

  • Cisco Systems OL-12397-13 - page 23

    2-23 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softsw itch-Based Features E.164 and Centrex Dialing Plan (Extension Dialing) The system supports E.164 and Cent rex Dialing Plan (extension d ialing) addressing from SIP subscribers served b y the local BTS 10200. ...

  • Cisco Systems OL-12397-13 - page 24

    2-24 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Planning VSCs In Networks with SIP Subscribers. Some features require SIP subscriber to enter a se ri es of numbers and characters on the SIP client or handset. T ypically , the subscriber d ...

  • Cisco Systems OL-12397-13 - page 25

    2-25 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softsw itch-Based Features • Call forwardi ng on no answer v ariable acti v a tion (CFN A V A), call forw arding on no answer v ariable deacti vation (CFN A VD), call f o rwarding on no answ er interrogation ( CFN ...

  • Cisco Systems OL-12397-13 - page 26

    2-26 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Whene ver a change in VM status oc curs for a subscriber (for example, when a VM messag e is deposi ted for the subscriber , or when all such messa ges hav e be e n retriev ed), the VM serve ...

  • Cisco Systems OL-12397-13 - page 27

    2-27 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softsw itch-Based Features Note For general VM pro vis ioning details, see “Pro visioning V oice Mail” in the C isco BTS 10200 Soft switch Pr ovisioning Guide . VM Within a Single Centrex Group The follo wing ex ...

  • Cisco Systems OL-12397-13 - page 28

    2-28 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Step 8 If your VM serv er does not support FQDN hostn ames, you must pro vision a serving-domain- name record in the BTS 10200 us ing the IP addresses resolv ed from the sia-xxxCAnnn.domain ...

  • Cisco Systems OL-12397-13 - page 29

    2-29 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Jointly Provided Features The follo wing provisioning steps il lustrate how to pro vide VM service for BTS 10200 Centrex subscribers across multip le Centrex gro ups. Step 1 Add a SIP trunk prof ile for voice-mail trunks. Qual ify ...

  • Cisco Systems OL-12397-13 - page 30

    2-30 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Jointly Provided Features Provisionin g in this conte x t refers to feature acti vati on or deacti vation, and setting an y applicable directory n umbers (DNs) associat ed with the feature. If a SIP handset is u sed, the phone’ s ...

  • Cisco Systems OL-12397-13 - page 31

    2-31 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Jointly Provided Features Number: Call-Fwd Uncondition al Activ a te/Deactivate Feature Set/Change F orwarding Number Number: Call-Fwd No Answer Activ a te/Deactivate Feature Set/Change F orwarding Number Number: Anonymous Call Rej ...

  • Cisco Systems OL-12397-13 - page 32

    2-32 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Phone-Based Fe atures Distinctive Ringing Distincti ve ringing uses a special ringing pattern to alert the called user of i ncoming calls from preselected telephone numbers. This is a CLASS feature and is offered to bo th bu siness ...

  • Cisco Systems OL-12397-13 - page 33

    2-33 Cisco BTS 10200 Softswitch SIP Feature and Provi sioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Phone-Based Features For features (such as DND) that are av ailable in dependently on the phones and the BTS 10200, you can provision either de vice to enable the feature. Caution Prior to pro visioning your system, determine ho w ...

  • Cisco Systems OL-12397-13 - page 34

    2-34 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Phone-Based Fe atures ...

メーカー Cisco Systems カテゴリー Frozen Dessert Maker

Cisco Systems OL-12397-13のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- OL-12397-13の取扱説明書
- Cisco Systemsの製品カード
- パンフレット
- またはCisco Systems OL-12397-13の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Cisco Systems OL-12397-13の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Cisco Systems OL-12397-13の取り付け説明書、サービスマニュアル、簡易説明書、またはCisco Systems OL-12397-13のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Cisco Systems OL-12397-13の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Cisco Systems OL-12397-13デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCisco Systems OL-12397-13を使用するのを助ける技術的文書のことです。説明書は通常、全てのCisco Systems OL-12397-13ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Cisco Systemsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Cisco Systems OL-12397-13の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCisco Systems OL-12397-13の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Cisco Systems OL-12397-13に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Cisco Systems OL-12397-13デバイスの基本機能を使うにあたってのヒント。 Cisco Systems OL-12397-13のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Cisco Systems OL-12397-13に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCisco Systems OL-12397-13のメーカー/サービスへの連絡先に関する情報。

Cisco Systems OL-12397-13についてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもCisco Systems OL-12397-13の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCisco Systems OL-12397-13で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)