Barco 7000の取扱説明書

99ページ 4.16 mb
ダウンロード

ページに移動 of 99

Summary
  • Barco 7000 - page 1

    B ARCO P ROJECT ION B ARCO U LT R A R EALITY 7000 R9002810 O WNER ’ S M ANUAL 30062003 R5976455/ 02 ...

  • Barco 7000 - page 2

    Product revision Software version: 1.10 Barco nv Intelligent Displays Noordl aan 5, 852 0 Kuurne Phone: +32 56.36.82.11 Fax: +32 56.35.86.51 E-mail: presentations.bid@barco.com Visit us at the web: www.barco.com Printed in Belgium ...

  • Barco 7000 - page 3

    Federal Communication Commissi on (FCC Statement) This equipment has been tested and fou nd to comply with the limits for a class A digital device, pu rsuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equ ipment is operated in a commercial environment. This equipment ...

  • Barco 7000 - page 4

    ...

  • Barco 7000 - page 5

    Table of con tents T ABLE OF CONTENTS 1 . P a c k a g i n g a n d D i m e n s i o n s ...................................................................................... 3 1 . 1 L e n s P a c k a g i n g ................. .................. ................... ................... ................... .................. ........ .. 3 1 . 2 D i m e ...

  • Barco 7000 - page 6

    Table of con tents 7 . 6 C o l o r t e m p e r a t u r e .......................... ................... .................. ................... ................... ........... ...... 4 9 7 . 7 F i l m m o d e d e t e c t i o n ..... ................... ............... ................... .................. ................... ............ ......... ...

  • Barco 7000 - page 7

    1. Packaging and Dimensi ons 1. P ACKAGING AND DIMENSIONS This chapter handles about the way the projector is packed and gives an overview of the dimensions. • Lens Packaging • Dimensions 1.1 Lens Packaging W ay of Packaging Lenses are supplied as a n individual item. T h e ya r ep a c k e di nac a r t o nb o x . Save the original shipping cart ...

  • Barco 7000 - page 8

    1. Packaging a nd Dimens ions 46 82.7 211.4 169.5 139.6 14 148.9 380.6 526.8 60 43 124.1 217.2 147.8 124.4 42 Image 1-2 184.4 368.7 Image 1-3 4 R5976455 BARCO ULTRA REALIT Y 7000 30062003 ...

  • Barco 7000 - page 9

    2. Installation G uidelines 2. INST ALLA TION GUIDELINES Overview • Safety warnings • Installation guidelines • Projector configurations • Lenses 2.1 Safety warnings Before installing the p rojector , read first the safety i nstructions in the safety manual (R5975258) delivered with the projector . Insure that the projector is installed in ...

  • Barco 7000 - page 10

    2. Insta llation Guide lines covered by opaque drapery wh ile the set is being viewed. It is desirable to install the projection system in a room whose walls and floor are of non-reflecting material. The use of recessed ceiling lights and a method of dimming those lights to an acceptable level is also important. T oo much ambient light will ‘wash ...

  • Barco 7000 - page 11

    2. Installation G uidelines Positioning the p rojector P PD x F a b c S S B SH SW SH SW F CD=SH/2+B-A A Image 2-1 R5976455 BARCO ULTRA REALITY 7000 30062003 7 ...

  • Barco 7000 - page 12

    2. Insta llation Guide lines a b c SH SW F PD x F S S B SH SW CD=B-A A Image 2-2 2.4 Lenses Overview • Lenses • Lens selection • Lens formulas • Lens installation • Cleaning the lens 8 R5976455 BARCO ULTRA REALIT Y 7000 30062003 ...

  • Barco 7000 - page 13

    2. Installation G uidelines 2.4.1 Lenses A vailabl e lenses The following lenses are available, or will become ava ilable (contact a BARCO service center) as an option : Lenses Standard version QFD(1.27:1) R9840400 QFD(2.5:1) R9840290 QFD(1.4-2.1:1) R9840380 QFD(2.1-3.0:1) R9840390 QFD(3.5-4.5:1) R9840060 QFD(4.5-6.0:1) R9840100 QFD(7:1) R9840410 Q ...

  • Barco 7000 - page 14

    2. Insta llation Guide lines Lenses Metric Formulas (meter) Inch Formulas (inch) QGD(0.8:1) / SW: (1-1.4)m PD = 0,775 x SW — 0,048 + 0,0074 / SW PD = 0.775 x SW — 1.8 9 + 1 1.47 / SW QGD(0.8:1) / SW: (1.7-2.4)m PD = 0,775 x SW — 0,048 + 0,0072 / SW PD = 0.775 x SW — 1.8 9 + 1 1.47 / SW QGD(0.86:1) PD = 0,8376 x SW + 0,00254 — 0,0150 /S W ...

  • Barco 7000 - page 15

    2. Installation G uidelines The procedu re for the mou nting of a Sc heimpflug l ens is dif ferent. Refer to the installation man ual of the lens. Never transport the projector with the lens mounted on it ! Always remove th e lens before transporti ng the projector . 2.4.5 Cleaning the lens T o minimize the p ossibility of damaging the optical coat ...

  • Barco 7000 - page 16

    2. Insta llation Guide lines 12 R5976455 BARCO ULTRA REALIT Y 7000 30062003 ...

  • Barco 7000 - page 17

    3. Connecti ons 3. CONNECTIONS Overview • Input Source connection 3.1 Input Source connection 3.1.1 Input faciliti es Overview inpu t facilitie s • 5-cable input (BNC1) • 5-cable Data input (BNC2) • Composite Video •S - V i d e o • SDI: Serial Digita l Interface (I/O) • DVI : Digital Visual Interface • HDSDI: High Definition SDI 3.1 ...

  • Barco 7000 - page 18

    3. Connecti ons Connector name R G B H V Super Video - Y - - C Component Video - SS R-Y Y B-Y S - Component Video - SOY R-Y Y S B-Y - - How to select s lot 1 1. Press key 1 on the RCU or the local keypad or use the menu The selection of a compo site video connected to the 5 cable input hap pens by pressing “3”, the compo site video configuratio ...

  • Barco 7000 - page 19

    3. Connecti ons What can be connected to the V ideo input? Composite video signals from a VCR, O FF air signal decoder , et c... No loop through. How to connect a V ideo source. 1. Connect the video output of your source to the video input of the pro jector (slot 3). 1 x BNC or cinch 1.0Vpp ± 3 dB. (image 3-3) Note: No loop through available. SDI ...

  • Barco 7000 - page 20

    3. Connecti ons SDI SDO S-VIDEO VIDEO R GB V 7 2 4 3 10Base-T G/Y B/PB H/C V 1 HDSDI HDSDO 9 RS 232 IN RS 232 OUT RC DVI H/C R/PR 9 5 Image 3-4 3.1.6 Digital V isual Inter face (DVI) input DVI Digital Visual Interface is a display interface developed in r esponse to the proliferation of digital flat panel displays. It uses a high speed serial inter ...

  • Barco 7000 - page 21

    3. Connecti ons 3.1.7 SDI input What can be connected ? This avoids the need for analog processing anywhere in the video production chain and guarantees the ultimate image quality . An active loop through of the S DI input signal is provided for m onitoring or for double or triple stacking app lications. How to connect a SDI source ? 1. Connect the ...

  • Barco 7000 - page 22

    3. Connecti ons SDI SDO S-VIDEO VIDEO R GB V 7 2 4 3 10Base-T G/Y B/PB H/C V 1 HDSDI HDSDO 9 RS 232 IN RS 232 OUT RC DVI H/C R/PR 9 5 Image 3-7 3.1.9 Communicat ions 3.1.9.1 RS232 IN connection What can be c onnected to t he RS232 IN connection ? The RS 232 IN connections allows the projector to communic ate with a Computer e.g. IBM PC or Apple M a ...

  • Barco 7000 - page 23

    3. Connecti ons T o set up the baudrate see “Instal lation” menu R5976455 BARCO ULTRA REALITY 7000 30062003 19 ...

  • Barco 7000 - page 24

    3. Connecti ons 20 R5976455 BARCO ULTRA REALIT Y 7000 30062003 ...

  • Barco 7000 - page 25

    4. Getting started 4. GETTING ST ARTED Overview • RCU & Local keypad • T erminology overview • Switching on • Lamp runtime • Quick set up adjustments 4.1 RCU & Local keypad How controlling t he projector ? The projector can be controlled by the local keypad or by the remote control unit. Location of the loca l keypad ? The local k ...

  • Barco 7000 - page 26

    4. Getting started Image 4-1 1 Function keys user programmable keys with functions f or direct access. 2 MENU Menu key , to e nter or exit the T o olbar menu . 3 Address key (recessed key), to enter the address of the projector (between 0 and 9). Press the recessed address key with a pencil, followed by pressing one digit button between 0 and 9. 4 ...

  • Barco 7000 - page 27

    4. Getting started 13 DIGI ZOOM allows a digital Zoom of a part of the image 14 FREEZ press to freeze the projected image. 15 PIP allows to activate the PICTURE IN PICT URE mode 16 ENTER to confirm an adjustment or selection in the MENU. On the local keypad the ENTER butt on additionally accesses the PIP window resize function 17 Cursor keys Cursor ...

  • Barco 7000 - page 28

    4. Getting started COLOR PHASE SHARPN TINT BRIGHTN STANDBY ENTER TEXT EXIT PAUSE 2 1 4 3 5 6 8 0 9 7 CONTRAST Stand-by key 9 7 5 3 1 0 8 6 4 2 F1 F2 F3 ENTER MENU BACK LENS ZOOM LENS SHIFT LENS FOCUS VOL CONTR BRIGHTN COLOR TINT DIGI ZOOM PHASE PAUSE PIP LOGO Image 4-3 It may take about 60 se conds before image projecti on, i.e. no projectio n unti ...

  • Barco 7000 - page 29

    4. Getting started 4.5 Quick set up adjustments Overview • Quick lens Adjustment •U s i n g t h e R C U • Projector address • Controlling the projector • Using the menu • Using the Dialogboxes 4.5.1 Quick lens Adjust ment What can be done ? For a quick lens set up an d image shift, use the R CU dedicated keys. Zoom/focus are only availa ...

  • Barco 7000 - page 30

    4. Getting started Ceiling Screen IR sensor RCU Image 4-4 Hardwired Remote I nput 1. Plug one end of the remote cable in the connector on the bottom of the RCU. 2. Plug the other end in the connector in the front panel of the p rojector labelled RC . (image 4-5) SDI SDO S-VIDEO VIDEO R GB V 7 2 4 3 10Base-T G/Y B/PB H/C V 1 HDSDI HDSDO 9 RS 232 IN ...

  • Barco 7000 - page 31

    4. Getting started SDI SDO S-VIDEO VIDEO COMPUTER IEEE 1394 TRIG MOUSE MONITOR RS232 IN RS232 OUT AUDIO I N AUDIO I N AUDIO I N AUDIO I N COMM. PORT RC C B A RGBH / C V 5 6 2 1 4 3 45ø 45ø 45ø 45ø F1 F2 F3 F4 F5 ADJ EXIT ENTER PAUSE PHASE TEXT SHARPN TINT COLOR BRIGHTN CONTR TREBLE BALANCE BASS VOL 90 78 5 6 34 1 2 F1 F2 F3 F4 F5 ADJ EXIT ENTER ...

  • Barco 7000 - page 32

    4. Getting started A projector will respond to a RCU set to the common address ’0’ re gardless of what address is set in the projector itself (common address of projector should also be “0” ). The RCU is default programme d with address 0 , ’common address’. If it is necessary to control a specific projector , then enter the projector a ...

  • Barco 7000 - page 33

    4. Getting started Sharpness Use the + button for a sharper picture. Use the - button for a softer picture. Phase Use the + or - button to adjust the phase. Gamma Use the + button for a higher gamma Use the - button for a lower gamma Freeze Press Freez e to freeze the displayed image. The Pause Key When the Pause key is pressed, the image projectio ...

  • Barco 7000 - page 34

    4. Getting started When the menu has been exited for more than 1 minute, the advanced user passw ord has to be re-entered. 4.5.6 Using the Dialog boxes How to use the dial ogboxes ? Some parameters are modified by means of a dialogbox, whe re selections can be made and/or values can be entered, T he values can be entered in several ways: Entering n ...

  • Barco 7000 - page 35

    5. Source Selection 5. SOURCE SELECTION Overview • Source selection • Composite Video • S-Video s electi on 5.1 Source selection Selecting a source The Source selection menu allows to se lect one of the different sources. Another method to select an input source is via the remote control using the numeric keys or by using the local keypad. Ho ...

  • Barco 7000 - page 36

    5. Source Selection 5.2 Composite Video How to select one of the 2 composite vi deo inputs ? 1. Press ME NU to activate the T oolb ar 2. Press ↓ to Pull down the Source Selection menu 3. Use ↑ or ↓ to select Composite video 4. Press → to Pull down the submenu 5. Use ↑ or ↓ to select one of the dif ferent video inputs (image 5-2) 6. Pres ...

  • Barco 7000 - page 37

    5. Source Selection Image 5-3 The s-video source can also b e selected using the numeric dig it “4” on the local keypad and the RCU. Pressing digit “4” on the RCU se lects the S-Video source selected in the S-Video menu. R5976455 BARCO ULTRA REALITY 7000 30062003 33 ...

  • Barco 7000 - page 38

    5. Source Selection 34 R5976455 BARCO ULTRA REALIT Y 7000 30062003 ...

  • Barco 7000 - page 39

    6. General Menu 6. GENERAL MENU Overview • Pause • Freeze • Standby Timer • Identification • Network Card reboot • Runtimes • History • Reset runtime • Runtime warning • Lamp Dimming 6.1 Pause How to interrupt the i mage projection ? 1. Press ME NU to activate the T oolb ar 2. Press → to select General 3. Press ↓ to Pull dow ...

  • Barco 7000 - page 40

    6. General Menu H o wt of r e e z et h ei m a g e? 1. Press ME NU to activate the T oolb ar 2. Press → to select General 3. Press ↓ to Pull down the General menu 4. Use ↑ or ↓ to select Freeze (image 6-2) 5. Press ENTER to activate the Freeze function Image 6-2 T h ei m a g ec a na l s ob ef r o z e nu s i n gt h eF R E E Z Ek e yo nt h eR ...

  • Barco 7000 - page 41

    6. General Menu Image 6-4 0 Countdown t o Standby timer sec Disabled Enabled Image 6-5 6.4 Identification The projector’s id entification sc reen The identification screen displays the projector ’s main characteristics How to display th e identifi cation screen ? 1. Press ME NU to activate the T oolb ar 2. Press → to select General 3. Press ? ...

  • Barco 7000 - page 42

    6. General Menu 6.5 Network Card reboot What can be done ? This function allows to reboot the network card. Only active when optional Dimm PC card is installed, otherwise it is greyed out. How to reboot th e network card ? 1. Press ME NU to activate the T oolb ar 2. Press → to select the General item 3. Press ↓ to Pull down the General menu 4. ...

  • Barco 7000 - page 43

    6. General Menu Runtime hrs 2 Lamp 5 Projector hrs Image 6-10 6.7 History How to view the hi story ? 1. Press ME NU to activate the T oolb ar 2. Press → to select the General item 3. Press ↓ to Pull down the Ge n eral menu 4. Use ↑ or ↓ to select Hi story (image 6-1 1) 5. Press ENTER A textbox is displayed (image 6-12) Image 6-1 1 Lamp hist ...

  • Barco 7000 - page 44

    6. General Menu 6.8 Reset runtime When to reset the lamp runtime ? The lamp runtime should only be reset when placing a new lamp. How to reset the l amp runtime ? 1. Press ME NU to activate the T oolb ar 2. Press → to select the General item 3. Press ↓ to Pull down the General menu 4. Use ↑ or ↓ to select Reset runtime 5. Press → to pull ...

  • Barco 7000 - page 45

    6. General Menu How to se t the lamp run time warni ng? 1. Press ME NU to activate the T oolb ar 2. Press → to select the General item 3. Press ↓ to Pull down the General menu 4. Use ↑ or ↓ to select Runtime warning (image 6-15) 5. Press ENTER A dialogbox is displayed (image 6-16) 6. Use ← or → , the numeric keys on the remote, or the k ...

  • Barco 7000 - page 46

    6. General Menu Image 6-17 Dimming 530 W 600 W Image 6-18 A projector starts alw ays with full lamp power. 42 R5976455 BARCO ULTRA REALIT Y 7000 30062003 ...

  • Barco 7000 - page 47

    7. Image M enu 7. IMAGE MENU Overview • Settings • Aspect ratio • Show native resolution •B l a n k i n g • Keystone • Color temperature • Filmmode detection • Advanced settings • Input balance • AGC on Video • Manual Gain Control 7.1 Settings Overview • Contrast • Brightness • Color • T int (hue) • Sharpness • Gam ...

  • Barco 7000 - page 48

    7. Image Menu 7.1.1 Contrast How to change the contrast 1. Press ME NU to activate the T oolb ar 2. Press → to select t he Image item 3. Press ↓ to Pull down the Image menu 4. Use ↑ or ↓ to select settings 5. Press → to pull down the menu 6. Use ↑ or ↓ to select Contrast 7. Press ENTER On the screen appears now a sliderbox 8. Use ← ...

  • Barco 7000 - page 49

    7. Image M enu 7.1.5 Sharpnes s How to change the sha rpness ? 1. Press ME NU to activate the T oolb ar 2. Press → to select t he Image item 3. Press ↓ to Pull down the Image menu 4. Use ↑ or ↓ to select settings 5. Press → to pull down the menu 6. Use ↓ or ↑ to select sharpness 7. Press ENTER On the screen appears now a sliderbox 8. ...

  • Barco 7000 - page 50

    7. Image Menu Selecting Auto in case of a Video source m ay shrink the image horizontally How to change th e Aspect ratio ? 1. Press ME NU to activate the T oolb ar 2. Press → to select Image 3. Press ↓ to Pull down the Image menu (image 7-3) 4. Use ↑ or ↓ to select Aspect r atio 5. Press ENTER to confirm Image 7-3 7.3 Show native resolutio ...

  • Barco 7000 - page 51

    7. Image M enu 5. Press → to pull down the menu 6. Use ↓ or ↑ to select On 7. Press ENTER A white bullet shows the selection Image 7-4 The default mode is us ed if the show native resolution an d the full screen function are off. The default mode show s always the native ratio an d forces the native resolution o ft h ep a n e l s( p a r to ft ...

  • Barco 7000 - page 52

    7. Image Menu Image 7-5 How to blank ? 1. Press ME NU to activate the T oolb ar 2. Press → to select t he Image item 3. Press ↓ to Pull down the Image menu 4. Use ↑ or ↓ to select Blanking (image 7-6) 5. Press → to pull down the menu 6. Use ↓ or ↑ to select left/right/up/down 7. Press ENTER A white bullet shows the selection Image 7-6 ...

  • Barco 7000 - page 53

    7. Image M enu 7.5 Keystone What can be done ? The Keystone adjustment is used to align the image, this c an be necessary when pro jecting under a non standard angle How to perform a Keysto ne correction ? 1. Press ME NU to activate the T oolb ar 2. Press → to select Image 3. Press ↓ to Pull down the Image menu 4. Use ↑ or ↓ to select Keyst ...

  • Barco 7000 - page 54

    7. Image Menu How to select a preset color temperatur e ? 1. Press ME NU to activate the T oolb ar 2. Press → to select t he Image item 3. Press ↓ to Pull down the Image menu 4. Use ↑ or ↓ to select Color temperature 5. Press → to pull down the menu 6. Use ↓ or ↑ to select the desired preset col or temperature 7. Press ENTER The color ...

  • Barco 7000 - page 55

    7. Image M enu The filmmode detection insures that these converted signals are shown without artefacts. This function m ay cause undesired effects on stan dard sources, therefor e it can be disabled (OFF) at any time Enabling/disabl ing the filmmode de tection 1. Press ME NU to activate the T oolb ar 2. Press → to select t he Image item 3. Press ...

  • Barco 7000 - page 56

    7. Image Menu 7.9 Input balance This procedure is reserve d to Barco authorized technicians only . 7.10 AGC on Video AGC Automatic Gain Control: allows an automatic amplitude (gain) control of the incoming video si gnal Enabling/disabl ing the AGC 1. Press ME NU to activate the T oolb ar 2. Press → to select t he Image item 3. Press ↓ to Pull d ...

  • Barco 7000 - page 57

    8. Tools Men u 8. T OOLS MENU Overview • Introduction to PiP • PiP se lect • PiP add window • PiP remove window • PiP layo ut •P i P A d j u s t • Diagnostics 8.1 Introduction to PiP PiP PiP stands for "Picture in Picture" and allows to display multiple windows containing each of them an image. The windows may be of the vide ...

  • Barco 7000 - page 58

    8. Tools Menu What are the different PiP confi gurations ? • Full screen 1 The full screen is used to display one of the selected sources. Browsing through the sources is possible with the PiP Adjust button on the remote. • Video in Data 1 The screen is divided into 2 sub screens the vi deo subscreen is placed on the data subscreen. Image 8-1 ? ...

  • Barco 7000 - page 59

    8. Tools Men u PiP dedicated buttons • PiP Adjust : this button allows to focus on one particular window , this is shown with a white frame surrounding the selected window . A source identification box is displayed in the right lower corner . Pressing the button removes the frame to the next window . This can also be done via PiP Adjust in the T ...

  • Barco 7000 - page 60

    8. Tools Menu How to add a window ? 1. Press ME NU to activate the T oolb ar 2. Press → to select the T ools item 3. Press ↓ to Pull down the T ools menu 4. Use ↑ or ↓ to select Pi P add window (image 8-4) 5. Press ENTER The source selection menu is displayed In the lower part of the screen appears a wizard in 4 steps (image 8 -5) Image 8-4 ...

  • Barco 7000 - page 61

    8. Tools Men u Image 8-7 8.5 PiP layout Overview •P i P S a v e • PiP rename layout • PiP de lete layou t 8.5.1 PiP Save What can be done ? The active layout can be saved or "saved as". When a new layout is saved it is added to the PiP select menu. A fixed layout can be edited (resi zing, rep ositioning,...) but it can not be saved ...

  • Barco 7000 - page 62

    8. Tools Menu 8.5.2 PiP rename layout What can be done ? The non fixed layou ts (factory and personal layouts) can be renamed . The maximal length of the name is 12 characters. A fixed layout can not be renamed How to rename a layout ? 1. Press ME NU to activate the T oolb ar 2. Press → to select the T ools item 3. Press ↓ to Pull down the T oo ...

  • Barco 7000 - page 63

    8. Tools Men u 6. Use ↑ or ↓ to select Delete 7. Press ENTER A dialogbox is displayed (image 8-13) 8. Use ↑ or ↓ to select the layout to be renamed 9. Press ENTER The layout is deleted and disappears from the dialogbox Image 8- 13 8.6 PiP Adjust What can be done ? PiP adjust allows to browse through the windows in the active layout, a white ...

  • Barco 7000 - page 64

    8. Tools Menu Video Source 1 Video625.c01 A B Video Source 1 Video625.c01 Image 8- 14 A the data window has the focus B the video window has the focus PiP adjust 1. Press ME NU to activate the T oolb ar 2. Press → to select the T ools item 3. Press ↓ to Pull down the T ools menu 4. Use ↑ or ↓ to select PiP Adjust (image 8-15) 5. Press ENTER ...

  • Barco 7000 - page 65

    8. Tools Men u 5. Press → to pull down the menu 6. Press ENTER to select I 2 C A textbox is displayed Image 8- 16 R5976455 BARCO ULTRA REALITY 7000 30062003 61 ...

  • Barco 7000 - page 66

    8. Tools Menu 62 R5976455 BARCO ULTRA REALIT Y 7000 30062003 ...

  • Barco 7000 - page 67

    9. Signal Menu 9. SIGNAL MENU Overview • Switching mode • Background 9.1 Switching mode Switching from one sour ce to another T o minimize undesired effects when switching from one sour ce to another , one can use the Seamless switching mode, besi de Seam- less switching there is a wide choice of several effects which render the source switchin ...

  • Barco 7000 - page 68

    9. Signal Menu 5. Press → to pull down the menu 6. Use ↑ or ↓ to select the desired background (image 9-2) 7. Press ENTER Image 9-2 64 R5976455 BARCO ULTRA REALIT Y 7000 30062003 ...

  • Barco 7000 - page 69

    10. Image files me nu 10. IMAGE FILES MENU Overview • Load file • Auto Image • Edit file • Rename file • Copy • Delete Introduction to image fil es An image files contains the main charac teristics of a source (number of activ e lines,...). The projector ’s memory contains a list of files corresponding to the most common sources, thes ...

  • Barco 7000 - page 70

    10. Image files menu Image 10-2 I nP i Pm o d e ,t h ef i l e sw h i c hm a yb el o a d e dw i l lb eo ft h ed a t at y p ei ft h ea c t i v ew i n d o wi s ad a t aw i n d o w ,o r they will be of the vi deo type if the active windo w is a video window. What to do if the image is not pe rfect ? If the displayed image is not correct after AutoImage ...

  • Barco 7000 - page 71

    10. Image files me nu Image 10-3 AutoImage Total pixels/line Cancel Start pixels/line Phase Contrast/brightness Image 10-4 The Auto Image s etup in the Display setup menu affect only Auto Image if it is launched via th e RCU key or at aut omatic file creation. Launching Au toImage via the menu involves com plete checking of all param eters. Auto Im ...

  • Barco 7000 - page 72

    10. Image files menu 8. Press ENTER A dialogbox is displayed (image 10 -7) 9. Use ← or → , the numeric keys on the remote, or the keypad to edit and change the valu es, confirm with ENTER Note: greyed out fields can not be updated (total pixels) Image 10-5 Edit custom file Video625.c14 Video625.c15 Video625.c16 Video625.c17 Video625.c18 Video62 ...

  • Barco 7000 - page 73

    10. Image files me nu Advanced edit On Comb filter Off Short AGC hold interval Long Coarse Sharpness Fine Image 10-8 video signal video signal frame blanking HI egalisation Image 10-9 HI AGC Hold interval The Comb filter is by default enabled. The AGC hold interval is the time interval in which the AGC is inhibited (AGC hold = no update in video am ...

  • Barco 7000 - page 74

    10. Image files menu 10.4 Rename file How to rename a fi le ? 1. Press ME NU to activate the T oolb ar 2. Press → to select the Image files item 3. Press ↓ to Pull down the Image files menu 4. Use ↑ or ↓ to select Rename (image 10-1 1) 5. Press ENTER A dialogbox is displayed (image 10-12) 6. Use ↑ or ↓ to select the desired file 7. Pres ...

  • Barco 7000 - page 75

    10. Image files me nu 6. Use ↑ or ↓ to select the desired file 7. Press ENTER A textbox is displayed (image 10-16) Use ← or → , ↓ or ↑ on the remote, or the keypad to enter the new name, confirm with ENTER . Image 10- 14 Image 10-15 Image 10-16 If the AutoImage func tion does not succeed in fin ding a file and no file is loaded (load li ...

  • Barco 7000 - page 76

    10. Image files menu Image 10- 17 Image 10-18 72 R5976455 BARCO ULTRA REALIT Y 7000 30062003 ...

  • Barco 7000 - page 77

    11. Display setup 1 1. DISPLA Y SETUP Overview • Full screen representation • Startup screen • T extbox • T ake screensho t • Menu bar position • Status bar position • Sliderbox position • AutoImage Setup 1 1.1 F ull screen representation Purpose of the Full screen representat ion The Full screen representation function forces to us ...

  • Barco 7000 - page 78

    11. Display setup 1 1.3 T extbox What can be done ? The textbox func tion allows to display or not the different sliderbox es used for instance f or picture settings (contrast,...), it also affects the source information windows (displayed in the right lower corner of the screen). How to enable/di sable the T extbox ? 1. Press ME NU to activate the ...

  • Barco 7000 - page 79

    11. Display setup Image 1 1-4 1 1.5 Menu bar position What can be done ? The menu toolbar can be centered vertically , the range being from top of the screen to the middle of the screen. This can be useful in applications where th e top image content is not displayed. How to center the menu ? 1. Press ME NU to activate the T oolb ar 2. Press → to ...

  • Barco 7000 - page 80

    11. Display setup Image 1 1-6 1 1.7 Sliderbox position What can be done ? The sliderbox can be displayed anywhere on the screen, the position can be set in this menu. How to reposit ion the slider box? 1. Press ME NU to activate the T oolb ar 2. Press → to select the Display setup item 3. Press ↓ to Pull down the Display setup menu 4. Use ↑ o ...

  • Barco 7000 - page 81

    11. Display setup 11 . 8 A u t o I m a g e S e t u p What can be done ? Autoimage allows to de tect automatically the characteristics of t he source (total pixels per line,...) and uses this information to adapt the image to the LCD panels. Autoimage can adapt the image base d on following data : • T otal pixels per line • Start pixel • Phase ...

  • Barco 7000 - page 82

    11. Display setup 78 R5976455 BARCO ULTRA REALIT Y 7000 30062003 ...

  • Barco 7000 - page 83

    12. Installation me nu 12. INST ALLA TION MENU Overview • Lens adjustments • Projector address • Orientation • Language • Quick access keys • RS232 baudrate • Network configuration • Change password • Auto file load 12.1 Lens adjustmen ts What can be done ? Motorized lenses can be adjusted in the installation menu or vi a the dedi ...

  • Barco 7000 - page 84

    12. Installatio n menu Image 12-2 Lens adjustments Use and for vertical shift Use and for horizontal shift Presss <enter> for ZOOM/FOCU S Press <LOGO> or <LENS> for test patter n Image 12-3 A vertical shift above 100% is n ot recomended in case of high resolution data si gnals. 12.2 Projector address What can be done ? In some cas ...

  • Barco 7000 - page 85

    12. Installation me nu Image 12-5 Image 12-6 Entering the new projector address ? 1. Enter the new projector address with the digit keys on the RCU, the local keypad or the cursor keys. This address mus t be between 0 and 255. How to change the common RC5 address ? 1. Press ME NU to activate the T oolb ar 2. Press → to select the Installation 3. ...

  • Barco 7000 - page 86

    12. Installatio n menu Image 12-9 12.4 Language List of languages The list of selectable languages is depending on the software of the projector . How to change the orien tation ? 1. Press ME NU to activate the T oolb ar 2. Press → to select t he Installation item 3. Press ↓ to Pull down the Installation menu 4. Use ↑ or ↓ to select Languag ...

  • Barco 7000 - page 87

    12. Installation me nu Image 12-10 How to program the qui ck access keys ? 1. Scroll through the menus to the desired menu i tem 2. Push the desired function key for 3 seconds The menu item is stored i n the quick access key 12.6 RS232 baudrate How to change the baudrat e? 1. Press ME NU to activate the T oolb ar 2. Press → to select t he Install ...

  • Barco 7000 - page 88

    12. Installatio n menu What can be done ? T o allow the network card to function properly , the network card has ta be configured. If the LAN uses a DHCP server the different parameters will be filled in automatically . However if the LAN does not use a DHC P server the parameters have to be filled in manually . It is advised to con sult the local ...

  • Barco 7000 - page 89

    12. Installation me nu Image 12- 13 Image 12-14 The new pass word is accepted if the new password and the confirmed passw ord coincide. If the pass word is fo rgotten contact a Barco auth orized technician. 12.9 Auto file load What can be done ? The Auto file load option allows to create automatically an image file whenever a new so urce is detecte ...

  • Barco 7000 - page 90

    12. Installatio n menu Image 12-15 86 R5976455 BARCO ULTRA REALIT Y 7000 30062003 ...

  • Barco 7000 - page 91

    A. Standard Ima ge Files A. ST ANDARD IMAGE FILES A.1 T able overview T able ove rview The following standard image files are pre-programmed in the projector . Name 3 Resolution 4 Fvert Hz 5 FHor kHz 6 Fpix MHz 7 Ptot 8 Pact 9 Ltot 10 Lact 11 1600_48V 1600x600i 48,040 62,500 135,000 2160 1600 651 600 CGA 640x200i 59,924 15.700 14.318 912 640 262 20 ...

  • Barco 7000 - page 92

    A. Standard Ima ge Files Name 3 Resolution 4 Fvert Hz 5 FHor kHz 6 Fpix MHz 7 Ptot 8 Pact 9 Ltot 10 Lact 11 hd_25i 1920x540 50,000 28,125 74,000 2640 1920 562 540 hd_25p 1920x1080 25,000 28,125 74,000 2640 1920 1 125 1080 hd_30p 1920x1080 30,000 33,750 74,000 2200 1920 1 125 1080 hd_60p 1280x720 60,000 45,000 74,000 1650 1280 750 720 INTER_GR 1 184 ...

  • Barco 7000 - page 93

    A. Standard Ima ge Files Name 3 Resolution 4 Fvert Hz 5 FHor kHz 6 Fpix MHz 7 Ptot 8 Pact 9 Ltot 10 Lact 11 SDI_625 675x278i 25,000 15,625 13,500 864 720 313 278 SDI_525 675x240i 29,970 15,734 13,500 858 720 263 240 SG_50 1600x1200 50,000 62,500 130,313 2085 1600 1250 1200 SG_60_2 1024x768 60,000 48,780 64,390 1 320 1024 813 768 SG_60_3 960x680 60, ...

  • Barco 7000 - page 94

    A. Standard Ima ge Files Name 3 Resolution 4 Fvert Hz 5 FHor kHz 6 Fpix MHz 7 Ptot 8 Pact 9 Ltot 10 Lact 11 SXGAP_70 1024x1280 70 92,902 133,779 1440 1024 1326 1280 SXGAP1_60 1024x1280 60 77,700 83,916 1080 1024 1297 1280 SXGAP2_60 1024x1280 60 79,498 1 10,661 1392 1024 1325 1280 UXGA_60 1600x1200 60 75,002 162,004 2160 1600 1250 1200 UXGA_65 1600x ...

  • Barco 7000 - page 95

    B. Cleanin g the Dustfil ter B. CLEANING THE DUSTFIL TER B.1 Cleaning When should it be done? Depending on the environement, the dust filters should be cleaned at least when replacing the lamp. When the projector operates in dusty environement, clean the dust filters earlier than when replacing the l amp. How to clean th e dustfilte r? T o clean th ...

  • Barco 7000 - page 96

    B. Cleaning the Dust filter 92 R5976455 BARCO ULTRA REALIT Y 7000 30062003 ...

  • Barco 7000 - page 97

    Gloss ary GLOSSAR Y AGC Automatic Gain Control: allows an automatic amplitude (gain) control of the incoming video signal Common address Default address. Projector will always execute th e comm and coming from a RCU programmed with that common address. DHCP Dynamic host configuration protocol DVI Digital Visual Interface is a display interface deve ...

  • Barco 7000 - page 98

    Gloss ary 94 R5976455 BARCO ULTRA REALIT Y 7000 30062003 ...

  • Barco 7000 - page 99

    Revision Sheet To : Barco nv Intelligent Displays Noordlaan 5, 8520 Kuurne Phone: +32 56.36.82.1 1, Fax: +32 56.35.86.51 E-mail: presentations.bid@barco.com, Web: www.barco.com From: Date: Please correct the following points in this documentation ( R5976455/02 ): page wrong correct R5976455 B ARCO U LTRA R EALITY 7000 30062003 ...

メーカー Barco カテゴリー Projector

Barco 7000のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 7000の取扱説明書
- Barcoの製品カード
- パンフレット
- またはBarco 7000の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Barco 7000の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Barco 7000の取り付け説明書、サービスマニュアル、簡易説明書、またはBarco 7000のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Barco 7000の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Barco 7000デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがBarco 7000を使用するのを助ける技術的文書のことです。説明書は通常、全てのBarco 7000ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Barcoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Barco 7000の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははBarco 7000の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Barco 7000に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Barco 7000デバイスの基本機能を使うにあたってのヒント。 Barco 7000のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Barco 7000に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるBarco 7000のメーカー/サービスへの連絡先に関する情報。

Barco 7000についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもBarco 7000の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがBarco 7000で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)