Canon DT 9500 CIの取扱説明書

52ページ 0.81 mb
ダウンロード

ページに移動 of 52

Summary
  • Canon DT 9500 CI - page 1

    The product image ma y differ from the actual product. Digital Satellite Receiver CryptoW orks Embedded User's Manual ...

  • Canon DT 9500 CI - page 2

    Thank you for purchasing a HUMAX product. Please read this user manual carefully, to be able to safely install, use and maintain the product at maximum performance. Keep this user manual next to your product for future reference. Throughout the whole manual, Note indicates additional product operation information to make the user aware of possible ...

  • Canon DT 9500 CI - page 3

    ** The product has been manufactured to satisfy international safety standards. Please read the following safety precautions and warnings carefully. ** • Disconnect the product from the mains before you start any maintenance or installation procedures. • Do not overload a wall outlet, extension cord or adapter as this may result in electric fir ...

  • Canon DT 9500 CI - page 4

    1. Before Using the Product ................................................................................. G B 5 1.1 Package Contents ............................................................................. G B 5 1.2 Front Panel ................................................................................... G B 6 1.3 Rear Panel ........ ...

  • Canon DT 9500 CI - page 5

    7. Parental Control .......................................................................................... GB37 7.1 Parental Rating ................................................................................ GB37 7.2 Modify PIN code ............................................................................... GB37 7.3 Front Panel Lock .. ...

  • Canon DT 9500 CI - page 6

    1. Before Using the Product This chapter provides detailed instructions on the product and its accessories. 1.1 Package Contents When you unpack your package contents, make sure you have all the necessary items shown in the figure below. If any of the items are missing or damaged, please contact your local product distributor for replacement. ** ** ...

  • Canon DT 9500 CI - page 7

    1.2 Front Panel ** ** 1. STANDBY Button ** Switches between operation and standby modes. ** 2. MODE Button ** Switches between DIGITURK and OTHER modes. ** 3. CH-/CH+ Button ** Moves the TV/radio channel up/down. ** 4. MAIL LED ** Green light is emitted when the mail was received. ** 5. DIGITURK CH LED ** Amber light is emitted when viewing DIGITUR ...

  • Canon DT 9500 CI - page 8

    1.3 Rear Panel ** ** 1. LNB IN ** Connects to a satellite antenna cable. ** 2. LNB OUT ** Connects to another digital Set-Top Box. ** 3. RS-232C ** Connects to your PC to update software. ** 4. TV SCART ** Connects a TV SCART cable. ** 5. VCR SCART ** Connects a VCR SCART cable. ** 6. VIDEO ** Connects to the TV or VCR and outputs video signals. 7. ...

  • Canon DT 9500 CI - page 9

    1.4 Conditional Access Although some TV and radio channels are free to air, most TV and radio/music channels are available on a subscription basis and can only be enjoyed via Conditional Access component. ** 1. Inserting Smartcard ** A Smartcard looks similar to a credit card and entitles you to view and listen to all the channels you choose to sub ...

  • Canon DT 9500 CI - page 10

    2. Inserting CI (Common Interface) Module ** Your product is equipped with a slot for Common Interface (CI). ** 1. Open the right-hand flap on the front panel of the product. 2. Insert the Smartcard into the CI module, and the CI module into the slot. ** GB 9 ...

  • Canon DT 9500 CI - page 11

    1.5 Remote Control 1. AV ** Selects the input source between TV and the product. ** 2. MODE ** Switches between DIGITURK and OTHER modes. ** 3. NUMERIC BUTTONS ** Enter a TV/radio channel number. ** 4. GUIDE (EPG) ** Displays the programme guide. ** 5. i (INFORMATION) - WHITE ** Displays the information about the channel and programme. ** 6. ARROW ...

  • Canon DT 9500 CI - page 12

    9. CH-/CH+ ** Changes the channel. ** 10. PP (Recall) ** Returns to the previous channel in each mode. ** 11. FREEZE ** Freezes the scene you are watching. Does not cease audio. ** 12. WIDE ** Changes the display format. ** 13. STANDBY ** Switches between operation and standby modes. ** 14. OPTS ** Displays the main menu. ** 15. BACK ** Returns to ...

  • Canon DT 9500 CI - page 13

    2. Setup This chapter describes how to set up the product. Select the most appropriate procedure depending on your requirements. Before you connect the product to any other equipment, you must disconnect all equipments from their power sources. Note: If you encounter any problem when setting up the product, please contact your local product distrib ...

  • Canon DT 9500 CI - page 14

    2. Using RCA Cable ** ** 1. Connect the antenna to the LNB IN of the product. 2. The RCA cable is connected as in the figure above. GB 13 ...

  • Canon DT 9500 CI - page 15

    3. Using RF Cable ** ** 1. Connect the antenna to the LNB IN of the product. 2. The RF cable is connected as in the figure above. ** Note: The default UHF channel is 36. 2. Setup GB 14 ...

  • Canon DT 9500 CI - page 16

    2.2 Connecting Audio System ** ** 1. Connect the optical S/PDIF terminal and Dolby Digital decoder to listen to higher quality sound. 2. Connect VIDEO on the product and VIDEO IN on the TV using the RCA cable. 3. Connect AUDIO L/R on the product and AUDIO IN L/R on the audio system using the RCA cable. GB 15 ...

  • Canon DT 9500 CI - page 17

    2.3 Powering On ** 1. Connect the power cord of the product to a wall outlet. ** ** 2. Press the STANDBY button on the front of the product or on the remote control. ** 2. Setup GB 16 ...

  • Canon DT 9500 CI - page 18

    3. Basic Operation 3.1 Installation Wizard When powering on your product for the first time after purchase, the selecting country screen is automatically displayed. Select the required country using the button and press the OK button. If you select "Turkey", the DIGITURK Installation menu will be displayed. And if you select other countri ...

  • Canon DT 9500 CI - page 19

    3.2 Viewing Programme You can change the channel using the CH-/CH+ , or NUMERIC buttons. You can also use the Channel List or Programme Guide. You can adjust the audio volume using the V-/V+ or button. ** Banner (Programme Information) The banner is always displayed for a specific period of time whenever you switch channels. You can view the progra ...

  • Canon DT 9500 CI - page 20

    3.3 Subtitle If the current programme provides subtitle information, the subtitle icon will appear on the banner. You can select the language for the subtitle using the TXT (SUBTITLE) button. You can select a default subtitle language in MENU-System Settings-Language Setting-Subtitle Language . ** 3.4 Soundtrack If the current programme is availabl ...

  • Canon DT 9500 CI - page 21

    3.5 Teletext ** When the channel supports teletext, the teletext icon is displayed on the banner. To enter Teletext mode, use the TXT (SUBTITLE) button to display teletext. To display teletext menu, press the OPTS button in teletext mode. Select your desired teletext function using the button and press the OK button. To view the teletext page, use ...

  • Canon DT 9500 CI - page 22

    4. Menu Map ** 4. Menu Map GB 21 ...

  • Canon DT 9500 CI - page 23

    Menu structure varies according to the item and its operation. You can easily navigate the menu using the following instructions: ** 1. Press the OPTS button to display the main menu screen. ** 2. Select the item you want using the button. ** 3. Press the OK button to move from a menu to a sub-menu. ** 4. Press the button to select option values. * ...

  • Canon DT 9500 CI - page 24

    5. Installation 5.1 DIGITURK 1. DIGITURK Installation You can automatically search the channel without entering any other information. 2. Change CAS Slot of All DIGITURK Channels You can check the CAS slot currently in use and change the CAS slot of all DIGITURK channels. Select the CAS slot you want using the button and press the OK button. 5. Ins ...

  • Canon DT 9500 CI - page 25

    5.2 Advanced Installation You can search other channels except DIGITURK channel. Enter the PIN code using the NUMERIC buttons. The default PIN code is set to "0000" . 1. Antenna Setting You can set antenna and LNB information to search channels using Antenna Setting ( MENU-Installation-Advanced Installation-Antenna Setting ). ** • Anten ...

  • Canon DT 9500 CI - page 26

    2. Manual Search You can search channels of the selected satellite by transponders using the transponder information. ** • Antenna Alternative: Select antenna alternative which has different combinations of settings for search. Antenna Alternative 16 is predefined for SMATV. • Frequency: Enter transponder frequency. • Polarisation: Select the ...

  • Canon DT 9500 CI - page 27

    3. Satellite Setting This menu appears only when you enable Motorised System in Antenna Setting menu and press the OK button while Antenna Alternative in Manual Search menu is selected. ** • Satellite Name: Select a satellite to identify a motor antenna. If the desired satellite name is not listed, then select "other". ** • Movement: ...

  • Canon DT 9500 CI - page 28

    ** To initialise the satellite position saved at Motor Antenna , set DiSEqC Command Mode to "Installer", set Motor Control to "Reset", then press the OK button. You will see a warning message. To continue the procedure, press the OK button. To set the motor position for each satellite manually, select the Satellite Name , set Di ...

  • Canon DT 9500 CI - page 29

    5. Automatic Search If you select the satellite to search channels according to Antenna Setting , you can automatically search the channel without entering any other information. To enter Automatic Search menu, press the OPTS button, then select Installation-Advanced Installation-Automatic Search . ** • Antenna Alternative: Select antenna alterna ...

  • Canon DT 9500 CI - page 30

    5.3 Organise Channels 1. Organise All Channels You can edit TV or radio channels using Organise TV/Radio Channels ( MENU-Installation-Organise Channels-Organise TV/Radio Channels-Organise All Channels ). You will be prompted to enter the PIN code. The default PIN code is "0000" . Before leaving Organise TV/Radio Channels screen, you will ...

  • Canon DT 9500 CI - page 31

    2. Organise Favourite A~B You can add channels to Favourite groups using Organise Favourite TV/Radio Channels ( MENU-Installation-Organise Channels-Organise TV/Radio Channels-Organise Favourite A~B ). Before leaving Organise Favourite TV/Radio Channels screen, you will be prompted to save the changes. If you would like to save the changes, select O ...

  • Canon DT 9500 CI - page 32

    3. Organise Satellites You can delete satellites and transponders. To enter Organise Satellites menu, go to MENU-Installation-Organise Channels-Organise Satellites . The Organise Satellites screen consists of Satellite List on the left side of the screen and Transponder List and Channel List on the right side. You can move the highlighter in order ...

  • Canon DT 9500 CI - page 33

    5.4 Factory Settings You can restore the product to the factory settings using the Factory Settings menu ( MENU-Installation-Factory Settings ) . You will be prompted to enter the PIN code. The default PIN code is "0000" . For more information, refer to 5.1.1 DIGITURK Installation . Warning: Please note that once you perform the factory s ...

  • Canon DT 9500 CI - page 34

    6. System Settings The System Settings menu ( MENU-System Settings ) lets you customise your product according to your perference. 6.1 Language Setting You can set the default language for menu, audio and subtitle. ** 6.2 Time and Date Setting You can set the current time and turn the product on or off automatically. Once you set the Wakeup time an ...

  • Canon DT 9500 CI - page 35

    6.3 A/V Output Setting This menu lets you adjust the audio and video output, set Dolby Digital, match the screen ratio to your TV, select the display format according to the screen ratio, select the TV standard and set the NTSC mode. Note: You can choose the Dolby Digital audio stream whenever possible by selecting "ON" in the Dolby Digit ...

  • Canon DT 9500 CI - page 36

    6.5 Other Setting You can adjust the transparency level of On-Screen Display (OSD), set the duration of the banner when switching channels, select automatic or manual mode for changing to reserved channel and set the duration of the reminder. GB 35 ...

  • Canon DT 9500 CI - page 37

    6.6 System Information The System Information menu ( MENU-System Settings-System Information ) provides information such as STB status, signal level of channel and software upgrade. Note: • You can also display STB Status by pressing i and OK button. • For more information about software upgrade, refer to 14. Software Upgrade . 6. System Settin ...

  • Canon DT 9500 CI - page 38

    7. Parental Control The Parental Control menu ( MENU-Parental Control ) lets you control the access to programmes by programme rating. Note: Enter the PIN code using the NUMERIC buttons. The default PIN code is set to "0000" . 7.1 Parental Rating Set Parental Rating by age level. “no block” allows you to watch programmes without any b ...

  • Canon DT 9500 CI - page 39

    8. Channel List There are five types of channel lists – All, Favourite, Network, Satellite, Alphabet - to find channels you are interested in quickly and easily. All channel lists display all searched TV or radio channels sorted by channel number. Favourite channel list displays favourite channels with three predefined sub-groups and two user def ...

  • Canon DT 9500 CI - page 40

    8.2 Setting Property of Channel You can add the current channel to Favourite group. In addition, you can lock, unlock, skip or delete the current channel while watching a programme. The operation is as follows: 1. Press the OK button while watching a programme. The channel list will appear on the screen. You can also display the channel list using ...

  • Canon DT 9500 CI - page 41

    8.3 Favourite List You can check and edit Favourite list quickly and easily. 1. Press the FAV button to display Favourite list while watching a programme. 2. Press the RED button to display the all channel list. Select the channel you want to add to Favourite list and press the OK button. Press the BLUE button to view the channel you select. To clo ...

  • Canon DT 9500 CI - page 42

    9. Utility The product provides various utilities: calendar, biorhythm and games. To use utilities, go to MENU-UTILITY . 1.Calendar You can see the monthly calendar. Press the button to change the year. Press the button to change the month. Press the OK or BACK button to return to the previous menu. 2. Biorhythm You can adjust your birth year and d ...

  • Canon DT 9500 CI - page 43

    10. Programme Guide The programme guide provides the programme information for all channels, based on date and time. In addition, it provides convenient ways to view programmes in "Now", "Next", "Weekly" or "Quick" mode - to search your desired programme and to watch or reserve it. You can go to the programme ...

  • Canon DT 9500 CI - page 44

    • Press the WHITE button to reserve the selected programme in "Now", "Next", "Weekly" or "Quick" mode. • Press the WHITE button to change the reservation mode or to cancel the reservation in Reserved mode. • Select a channel using the or CH-/CH+ button. When switching channels using the button, press th ...

  • Canon DT 9500 CI - page 45

    11. Mail You receive mails sent by broadcasting company. When a new mail arrives, the envelope icon will appear on the screen. Sometimes a new message will be directly displayed on the screen while you are watching a programme. The old mails will be deleted automatically when your mail box overflows. Select a mail using the button, then press the O ...

  • Canon DT 9500 CI - page 46

    12. Conditional Access You can check the information of Internal or External Smartcard using the MENU-Conditional Access . 12. Conditional Access GB 45 ...

  • Canon DT 9500 CI - page 47

    13. Common Interface You can check the information of CI module using the MENU-Common Interface . 13. Common Interface GB 46 ...

  • Canon DT 9500 CI - page 48

    14. Software Upgrade In order to maintain proper performance of the product, it is essential to have the most up-to-date software. 14.1 OTA (Over the Air) OTA, an abbreviation of Over–the-Air , is a standard for the transmission of software through a broadcast system. OTA is simply an alternative method for downloading software versions. However, ...

  • Canon DT 9500 CI - page 49

    Updating software is largely divided into two ways, automatic and manual search in MENU-System Settings-System Information-Software Upgrade . Select Automatic Search to search pre-defined DIGITURK TPs for new software automatically. When new software is available to download, the product will be automatically powered off and on. If new software is ...

  • Canon DT 9500 CI - page 50

    15. Troubleshooting Before contacting your local service, please read the following instructions. If the product does not work normally after completing the following troubleshooting, please contact your local product distributor or service centre. ** 1. The LED on the front panel does not light. - Check the main power cable and make sure that it i ...

  • Canon DT 9500 CI - page 51

    5. Remote control does not operate - To manipulate the equipment with the remote control, its emitting part should directly point towards its receiving part of the product. - Check the battery of the remote control. ** 6. Reservation is unavailable - Check if it is not overlapped with other reservation. - Check if the power is off. ** 7. Watching s ...

  • Canon DT 9500 CI - page 52

    16. Specification ** MPEG Transport Stream A/V Decoding Aspect Ratio 4:3, 16:9 Video Resolution 720 x 576, 720 x 480 Audio Mode Single /Dual mono/ Stereo /Joint stereo Memory Flash Memory 2 Mbytes Graphics(MPEG) & System Memory 16 Mbytes EEPROM 8 Kbytes RF-Modulator Output Channel CH 21 ~ 69 TV standard PAL I/G/B/D/K Preset Channel CH 36 A/V &a ...

メーカー Canon カテゴリー Satellite TV System

Canon DT 9500 CIのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- DT 9500 CIの取扱説明書
- Canonの製品カード
- パンフレット
- またはCanon DT 9500 CIの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Canon DT 9500 CIの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Canon DT 9500 CIの取り付け説明書、サービスマニュアル、簡易説明書、またはCanon DT 9500 CIのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Canon DT 9500 CIの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Canon DT 9500 CIデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCanon DT 9500 CIを使用するのを助ける技術的文書のことです。説明書は通常、全てのCanon DT 9500 CIユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Canonの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Canon DT 9500 CIの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCanon DT 9500 CIの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Canon DT 9500 CIに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Canon DT 9500 CIデバイスの基本機能を使うにあたってのヒント。 Canon DT 9500 CIのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Canon DT 9500 CIに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCanon DT 9500 CIのメーカー/サービスへの連絡先に関する情報。

Canon DT 9500 CIについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもCanon DT 9500 CIの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCanon DT 9500 CIで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)