-
CDA DC730 - page 1
Customer Car e Department • The G r oup Ltd. • Harby Road • Langar • Nottinghamshi r e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www .cda.eu DC7 30.. - Built Under Double Ov ens Manual for Inst allation, Use and Maintenanc e ...
-
CDA DC730 - page 2
2 Important This appliance is designed and manufactur ed solely for the cooking of domestic (household) f ood and is not suitable for an y non domestic application and ther ef ore should not be used in a commercial envir onment. The applianc e guar antee will be void if the appliance is used within a non domestic envir onment i.e. a semi commer cia ...
-
CDA DC730 - page 3
3 Befor e Using for the Fir st Time – Read the instructions car efully before installing and using the applianc e. – After unpacking the appliance, check that it is not damaged. In case of doubt, do not use the appliance and contact your supplier or a qualified engineer . – Remove all the packing materials (i.e. plastic bags, polystyrene foa ...
-
CDA DC730 - page 4
4 Important Saf eguar ds and R ecommendations – Do not carry out any cleaning or maintenance without fir st disconnecting the applianc e from the electrical supply. – During and after use of the double oven, cert ain parts will become very hot. Do not touc h hot parts. – After use alw ays ensur e that the contr ol knobs are in the OFF positi ...
-
CDA DC730 - page 5
5 Contr ol Panel Contr ols Description 1 . Oven temperatur e knob (T op oven) 2. Function selector knob (T op ov en) 3. Function selector knob (L ower main oven) 4. Oven temper ature knob (L ower main ov en) 5. Digital electr onic progr ammer (Low er main oven only) W arning Lights: 6. Main oven temper ature indicat or light 7 . T op oven temperatu ...
-
CDA DC730 - page 6
6 T op Natur al Conv ection Oven Gener al Featur es This oven features 2 differ ent thermostatic contr ol functions to satisfy all cooking r equirements, pr ovided by 3 heating elements: – Upper element, 700 W – Low er element, 1 000 W – Grill element, 2000 W Not e: When using for the first time, you are advised to operate the oven at maximu ...
-
CDA DC730 - page 7
7 Thermostat Knob (Fig. 2) This only sets the cooking temper ature and does not s witch the ov en on. Rotat e clockwise until the r equir ed temperatur e is reached (fr om 50 °C to 250 °C). The thermostat indicator light will illuminate when the oven is switc hed on and turns off when the oven reac hes the correct temper ature. The light will cyc ...
-
CDA DC730 - page 8
8 Ov en Cooking Befor e introducing the food, pr eheat the oven to the desir ed temperatur e. For a correct preheating operation, it is advisable to remove the tray from the oven and introduc e it together with the food, when the ov en has reac hed the desir ed temperatur e. Check the cooking time and turn off the oven 5 minutes befor e the theoret ...
-
CDA DC730 - page 9
9 Lo w er Main Fan Ov en Gener al Featur es The heating and cooking in electrical hot air ovens tak e place by for ced convection. The element which make this pr ocess take place is: – Circular element 1 900 W Not e: Upon first use, it is advisable to operate the oven at the maximum temperatur e (thermostat knob on the maximum position) for 60 m ...
-
CDA DC730 - page 10
10 Thermostat Knob (Fig. 5) This only sets the c ooking t emper atur e and does no t swit ch the ov en on. Rotat e clockwise until the requir ed temperature is reac hed (from 50 °C to 250 °C). The thermostat indicator light will illuminate when the oven is switc hed on and turns off when the oven reac hes the correct temper ature. The light will ...
-
CDA DC730 - page 11
11 Lo w er Ov en Cooking A dvice Cooking with F or ced Air Fan cooking is more economical and quicker than cooking in a conventional oven. The moving hot air surrounds the f ood and penetrates it more quic kly than in a conv entional oven. The oven can be filled with different dishes all requiring the same cooking temperatur e. Subtract 1 0 minute ...
-
CDA DC730 - page 12
12 Electr onic Pr ogr ammer (Low er Main Ov en only) The electronic progr ammer is a device that groups together the following functions: – 24 hour clock with illuminated display – Timer (up to 23 hours and 59 minut es) – Programme f or automatic oven c ooking – Programme f or semi-automatic oven c ooking. A Description of the Butt ons: Sym ...
-
CDA DC730 - page 13
13 Setting T ime of Da y (fig. 7) The pr ogrammer is provided with an electronic clock with luminous figur es showing the hour and minutes. The first time the oven is connected up to the electricity supply and after a power cut, three zeroes will flash on the progr ammer display. T o adjust the time, the two buttons must be pressed simult aneou ...
-
CDA DC730 - page 14
14 Minute Minder The minute counter function consists simply of an acoustic signal which can be set for a maximum of 23 hours 59 minutes. If the letter A is flashing, press the tw o buttons simultaneously. T o set the time, pr ess button and then button or until the r equired time appear s on the display (Fig. 9). The symbol will come on. Countdow ...
-
CDA DC730 - page 15
15 Semi - Aut omatic Cooking This aut omatically swit ches the ov en off after the r equired c ooking time. There are tw o methods of semi- automatic cooking: 1 . METHOD: Progr amming the cooking time (Fig. 1 1) – Set the cooking time by pr essing butt on and then but ton to move f orwar d or t o move back if you hav e gone beyond the r equired t ...
-
CDA DC730 - page 16
16 A A Fig. 1 3 Fig. 1 4 Aut omatic Cooking T o cook in the oven in automatic mode f ollow the instructions below: 1 . Set the cooking time 2. Set the end of cooking time 3. Set the cooking temper ature and function These operations ar e carried out as follows: 1 . Set the cooking time by pressing button and then to move forw ard or to move back if ...
-
CDA DC730 - page 17
17 Do’s and do not’s – Do always grill with the ov en door closed. – Do read the user instructions car efully before using the double ov en for the fir st time. – Do allow the double oven to heat for one and a half hours, befor e using for the first time, in or der to expel any smell fr om the new oven insulation, without the intr oduct ...
-
CDA DC730 - page 18
18 Car e and Maintenanc e It is advisable to clean when the appliance is cold and especially for cleaning the enamelled parts. Av oid leaving alkaline or acidic substances (lemon juice, vinegar , etc.) on the surfaces. Av oid using cleaning products with a c hlorine or acidic base. W ARNING When corr ectly installed, your product meets all safety r ...
-
CDA DC730 - page 19
19 Replacing the Ov en Lights W ARNING: Ensur e the appliance is switc hed off befor e replacing the lamp to a void the possibility of electric shoc k. – Let the oven ca vity and the heating elements to cool down; – Switch off the electrical supply; – Unscrew the pr otective cover C (fig. 1 5); – Unscrew and replace the bulb B with a new o ...
-
CDA DC730 - page 20
20 Assembling and Dismantling of the Side R unner Fr ames – Assemble the wire r acks to the oven walls using the 2 scr ews (Figs. 1 6-1 8). – Slide the tray and rack into the runners (Figs. 1 7-1 9). The rac k must be fitted so that the safety catch, which stops it sliding out, fac es the inside of the oven. – T o dismantle, operate in r eve ...
-
CDA DC730 - page 21
21 Ov en Doors Remo ving the Ov en Doors The oven doors can easily be r emoved as follows: – Open the door to the full extent (fig. 20a). – Open the lever A completely on the left and right hinges (fig. 20b). – Hold the door as shown in fig. 20. – Gently close the door (fig. 20c) until left and right hinge levers A are hook ed to part B ...
-
CDA DC730 - page 22
22 Ov en Doors - R emov able Inner Pane of Glass Cleaning the Panes o f Glass The oven doors ar e fitted with no. 2 panes: - no. 1 outside; - no. 1 inner; T o clean the panes on both sides it is necessary to remove the inner pane as follows. Do not use harsh abrasive cleaners or sharp metal scraper s to clean the oven door glass since they scratch ...
-
CDA DC730 - page 23
23 Replacing the Inner P ane of Glass 1 . Make sure the door is loc ked open (see fig. 23). 2. Replace the inner pane: – Check that the f our rubber pads are in plac e ( D in Fig. 26). – Insert the pane in the left E and right F slide guides (fig. 27), and gently slide it to the r etainers H (fig. 28). – T op oven door only: reassemble the ...
-
CDA DC730 - page 24
24 AD VICE FOR THE INS T ALLER Important Appliance installation and maintenance must only be carried out by QUALIFIED TECHNICIANS and in compliance with the local saf ety standar ds. • Failur e to observe this rule will invalidate the warr anty. • Always disconnect the appliance from the electrical supply befor e carrying out any maintenance op ...
-
CDA DC730 - page 25
25 T o Build in the Double Ov en • The appliance should be installed b y a QUALIFIED INS T ALLA TION TECHNICIAN. The appliance must be installed in complianc e with regulations in f or ce. The built under double oven shall be fit ted under the w orking surface into a kit chen base unit (width and depth 60 cm) but you must ensur e that it is prop ...
-
CDA DC730 - page 26
26 Installation "A" betw een Existing Side Cabinets (560 or 600 mm GAP) (figs. 32, 33, 34, 36) – Mount the 2 (two) metal supports “ B ” (supplied with the appliance in a separat e kit) as indicated in Figs. 33 or 36). – Fig. 36 only - prepar e 2 wood uprights “ A ” (width 20-50 mm, thickness 1 8 mm, length 650 mm); mount the ...
-
CDA DC730 - page 27
27 544 20 538 7 1 8 595 600 W ARNING ! VER Y IMPORT ANT The underside o f the cabinet shall be opened to allo w corr ect air circulation. 7 20 min ( * ) B 5 70 min 20 22 1 5 20 - 50 18 A B 650 A Support base ( * ) Measure calculated fr om the underneath of the w orktop to the t op support base of the “ B ” supports. Fig. 36 Installation “B” ...
-
CDA DC730 - page 28
28 Installation "C" By Using Housing Unit (figs. 3 7 , 38, 39) • Remove the single ov en shelf, if tted, as indicated in gur e 37 . • Remove the upper cr oss member support as indicated in gure 38. • Cut the bottom of the housing as indicated in gur e 38. • Screw oven base housing to adjoining cabinetry by suitable sc ...
-
CDA DC730 - page 29
29 Fig. 8.3b Remove single oven shelf, if fitted. Cabinet f or installing the oven Fig. 3 7 544 20 538 7 1 8 595 B Fig. 39 40 30 600 B 7 20 min 42 B Support base 40 Measure calculated fr om the underneath of the worktop to the top support base of the “B” supports. Fig. 38 1 5 1 5 30 25 1 8 1 8 36 30 Installation “C” ...
-
CDA DC730 - page 30
30 Fixing the Double Ov en The double oven should then be secured by 6 scr ews (not supplied) fitted into the holes provided at the sides of the oven (Fig. 40). If you open the oven door s, you will see some screw holes. Remember the housing should not be fr ee standing but be secured to the wall and/or adjac ent fittings. Not e: It is essential ...
-
CDA DC730 - page 31
31 IMPOR T ANT : – T o avoid damage t o the lower trim please note the f ollowing instructions. – The lower trim is designed to allow f or good air circulation and the corr ect opening of the oven door . – T o ensure the trim is not damaged due to the appliance being placed on the floor , the appliance should be suitably supported as in belo ...
-
CDA DC730 - page 32
32 Electrical Installation For your saf ety please r ead the follo wing information: W ARNING! Befor e effecting any intervention on the electrical parts the appliance must be disconnected fr om the network. IMPOR T ANT : The ov en must be installed in accordanc e with the manufacturer’s instructions. Incorr ect installation, for whic h the manuf ...
-
CDA DC730 - page 33
33 Connection the Double Ov en Mains Cable Important! This ov en must be connected to the mains po w er supply only by a suitably qualified per son. Unscrew the scr ews A securing the cover plate B behind the oven (fig. 44). – Remove the c over plate B . – Remove the scr ews C from the cable clamp (fig. 45). – Insert the mains cable (type ...
-
CDA DC730 - page 34
34 Appliance Servicing CDA pr ovide a quality and effective after -sales service to cov er all your servicing needs. Please attac h your r eceipt to this page f or safekeeping. Please help us to help you by ha ving the following inf ormation available when booking a servic e-call: 1 . Model type, make and model – see the product data plat e. 2. E ...
-
CDA DC730 - page 35
35 Guar antee CDA applianc es carry a five-year parts and a one-year labour guar antee. CDA will repair or replace any defect or part attributable to faulty material or workmanship. Within the first year this will be free of both labour and parts char ges. After the first year and within five years, the parts will be supplied fr ee of c harge p ...
-
CDA DC730 - page 36
Customer Car e Department • The G r oup Ltd. • Harby Road • Langar • Nottinghamshi r e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www .cda.eu T o contact our Customer Car e Department, or for Service, please contact us on the det ails below . Cod. 1 1 03550- ß2 ...
CDA DC730についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもCDA DC730の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCDA DC730で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。