Alpine VOLUME 1.3の取扱説明書

18ページ 0.41 mb
ダウンロード

ページに移動 of 18

Summary
  • Alpine VOLUME 1.3 - page 1

    UL TRAPROBE TM 100 INSTRUCTION MANUAL VOLUME 1.3 ...

  • Alpine VOLUME 1.3 - page 2

    NEED HELP??? HA VE QUESTIONS?? AT UE SYSTEMS, WE ARE DEDICATED TO SUPPORTING OUR ULTRAPROBE USERS. OUR STAFF HAS YEARS OF FIELD EXPERIENCE AND IS STANDING READY TO ASSIST YOU SHOULD YOU NEED US. WHEREVER YOU ARE, REMEMBER, WE ARE AS CLOSE AS YOUR PHONE, FAX OR COMPUTER. CALL: 914-592-1220 FAX: 914-347-2181 Email: ue@worldnet.att.net Internet: http: ...

  • Alpine VOLUME 1.3 - page 3

    The ULTRAPROBE 100 provides easy, accurate leak detection and mechanical inspection through advanced ultrasonic technology. Before you begin testing, it is advisable to familiarize yourself with the basic components of your kit. 1. PISTOL HOUSING The main component of the Ultraprobe is its' pistol housing. From back to front, let's examin ...

  • Alpine VOLUME 1.3 - page 4

    2. SCANNING MODULE This module is utilized to receive air-borne ultrasound such as the ultrasounds emitted by pressure leaks and electrical discharges. To use, make sure it is plugged in to the front end of the metered pistol housing by aligning the plug with the receptical and inserting it firmly. To use the Scanning Module: 1. Plug in to front en ...

  • Alpine VOLUME 1.3 - page 5

    To use the WARBLE TONE GENERATOR : 1. Turn Tone Generator on by selecting either "LOW" for a low amplitude signal (usually recom mended for small containers) or "HIGH" for high amplitude. In high, the Warble Tone Generator will cover up to 4,000 cubic feet (121.9 cu. meters) of unobstructed space. When the Tone Generator is on, ...

  • Alpine VOLUME 1.3 - page 6

    -4- UL TRAPROBE APPLICA TIONS 1. LEAK DETECTION This section will cover airborne leak detection of pressure and vacuum systems. (For information concerned with internal leaks such as in Valves and Steam Traps, refer to the appropriate sections). What produces ultrasound in a leak? When a gas passes through a restricted orifice under pressure, it is ...

  • Alpine VOLUME 1.3 - page 7

    -5- B. TO CONFIRM A LEAK: Position the Scanning Module, or the rubber focusing probe (if it is on the scanning module) close to the suspect leak site and move it, slightly, back and forth, in all directions. If the leak is at this location, the sound will increase and decrease in intensity as you sweep over it. In some instances, it is useful to po ...

  • Alpine VOLUME 1.3 - page 8

    -6- D. LOW LEVEL LEAKS In ultrasonic inspection of leakage, the amplitude of the sound often depends upon the amount of turbulence generated at the leak site. The greater the turbulence, the louder the signal, the less the turbulence, the lower the intensity of the signal. When a leak rate is so low that it produces little, if any turbulence that i ...

  • Alpine VOLUME 1.3 - page 9

    The Tone Test incorporates two basic components: a TONE GENERATOR (an ultrasonic transmitter) , and the Scanning Module in the Ultraprobe. To conduct the test: 1. Make certain the test item has no fluids or contaminants such as water, mud, sludge, etc., that can block the path of the transmitted ultrasound. -7- 2. Place the Tone Generator within th ...

  • Alpine VOLUME 1.3 - page 10

    2. ELECTRIC ARC, CORONA, TRACKING DETECTION There are three basic electrical problems that are detected with the Ultraprobe 500: Arcing: An arc occurs when electricity flows through space. Lightning is a good example. Corona: When voltage on an electrical conductor, such as an antenna or high voltage transmission line exceeds the threshold value, t ...

  • Alpine VOLUME 1.3 - page 11

    3. DETECTING BEARING WEAR Ultrasonic inspection and monitoring of bearings is by far the most reliable method for detecting incipient bearing failure. The ultrasonic warning appears prior to a rise in temperature or an increase in low frequency vibration levels. Ultrasonic inspection of bearings is useful in recognizing: a. The beginning of fatigue ...

  • Alpine VOLUME 1.3 - page 12

    DETECTING BEARING FAILURE COMPARATIVE TESTING. The comparative method involves testing two or more similar bearings and "com- paring" potential differences. FOR COMPARATIVE TEST 1. Use contact (stethoscope) module. 2. Select a "test spot" on the bearing housing. Touch that spot with the contact module. In ultrasonic sensing, the ...

  • Alpine VOLUME 1.3 - page 13

    5. LOCATING FAULTY STEAM TRAPS An ultrasonic test of steam traps is a positive test. The main advantage to ultrasonic testing is that it isolates the area being tested by eliminating confusing background noises. A user can quickly adjust to recognizing differences among various steam traps, of which there are three basic types: mechanical, thermost ...

  • Alpine VOLUME 1.3 - page 14

    THERMOSTATIC TRAPS (bellows & bimetallic) operate on a difference in temperature between condensate and steam. They build up condensate so that the temperature of condensate drops down to a certain level below saturation temperature in order for the trap to open. By backing up condensate, the trap will tend to modulate open or closed depending ...

  • Alpine VOLUME 1.3 - page 15

    6. LOCATING FAULTY VALVES Utilizing the contact (stethoscope) module in the Ultraprobe, valves can easily be monitored to determine if a valve is operating properly. As a liquid or gas flows through a pipe, there is little or no turbulence generated except at bends or obstacles. In the case of a leaking valve, the escaping liquid or gas will move f ...

  • Alpine VOLUME 1.3 - page 16

    ULTRASOUND TECHNOLOGY The technology of ultrasound is concerned with sound waves that occur above human perception. The average threshold of human perception is 16,500 Hertz. Although the highest sounds some humans are capable of hearing is 21,000 Hertz, ultrasound technology is usually concerned with frequencies from 20,000 Hertz and up. Another w ...

  • Alpine VOLUME 1.3 - page 17

    SPECIFICA TIONS Construction : Hand held ABS pistol type ultrasonic processor stainless steel sensor enclosures Circuitry: SMD/Solid State hybrid hetrodyne receiver Frequency Response: 20-100 kHz (centered at 28-42 kHz) Indicator: 10 segment LED bargraph (red) Sensitivity Selection: 8 position precision attenuation Power: 9 volt alkaline battery Lo ...

  • Alpine VOLUME 1.3 - page 18

    SAFETY ADVISOR Y PLEASE READ BEFORE USING YOUR INSTRUMENT . W ARNING Improper use of your ultrasonic detector may result in death or serious injury . Observe all safety precautions. Do not attempt to make any rep airs or adjustments while the equipment is operating. Be sure to turn off and LOCK OUT all electrical and mechanical sources before perfo ...

メーカー Alpine カテゴリー Impact Driver

Alpine VOLUME 1.3のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- VOLUME 1.3の取扱説明書
- Alpineの製品カード
- パンフレット
- またはAlpine VOLUME 1.3の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Alpine VOLUME 1.3の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Alpine VOLUME 1.3の取り付け説明書、サービスマニュアル、簡易説明書、またはAlpine VOLUME 1.3のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Alpine VOLUME 1.3の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Alpine VOLUME 1.3デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがAlpine VOLUME 1.3を使用するのを助ける技術的文書のことです。説明書は通常、全てのAlpine VOLUME 1.3ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Alpineの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Alpine VOLUME 1.3の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははAlpine VOLUME 1.3の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Alpine VOLUME 1.3に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Alpine VOLUME 1.3デバイスの基本機能を使うにあたってのヒント。 Alpine VOLUME 1.3のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Alpine VOLUME 1.3に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるAlpine VOLUME 1.3のメーカー/サービスへの連絡先に関する情報。

Alpine VOLUME 1.3についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもAlpine VOLUME 1.3の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAlpine VOLUME 1.3で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)