Manual Miele 09 157 540

84 pages 2.56 mb
Download

Go to site of 84

Summary
  • Miele 09 157 540 - page 1

    Operating and installation instructions Frost-free freezer with ice/water dispenser F 1471 Vi To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 09 157 540 en - GB, HK, ...

  • Miele 09 157 540 - page 2

    Description of the appliance .........................................5 Caring for the environment ..........................................7 Warning and Safety instructions .....................................8 How to save energy ...............................................1 4 Switching on and off ............................................. ...

  • Miele 09 157 540 - page 3

    Switching off the ice/water dispenser ........................................................3 5 Settings mode for ice/water dispenser .................................3 5 Automatic defrost ................................................3 7 Cleaning and care ................................................3 8 Before cleaning ..................... ...

  • Miele 09 157 540 - page 4

    Tools and accessories required ......................................6 3 Weight of the door front .............................................6 4 Building into a peninsular run ........................................6 4 Building-in at the end of a run of units ..................................6 4 Aligning the housing unit ....................... ...

  • Miele 09 157 540 - page 5

    Control panel for the freezer a Access sensor b Sensor for selecting the temperature in the freezer ( X for colder; Y for warmer) c On/Off sensor for the Super freeze function Control panel for the ice/water dispenser a On/Off sensor for the lighting b Chilled water sensor c Ice cube sensor d On/off sensor for the ice/water dispenser e Sensor for s ...

  • Miele 09 157 540 - page 6

    a Interior lighting b Door basket c Ice cube maker d Ice cube container e Adjustable shelf f Control panel for the freezer g Rocker switch for switching the whole appliance on and off h Freezer baskets i Water filter j Ice/water dispenser in the door k Control panel for the ice/water dispenser l Dispensing spout for ice/water m Drip tray cover with ...

  • Miele 09 157 540 - page 7

    Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and should be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! Disposal of your old applia ...

  • Miele 09 157 540 - page 8

    This appliance complies with all relevant safety requirements. Improper use can, however, present a risk of both personal injury and material damage. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and before using it for the first time. They contain important notes on install ...

  • Miele 09 157 540 - page 9

    Safety with children ~ Children 8 years and older may use the appliance only if they have been shown how to use it in a safe way and understand the hazards involved. ~ Children under 8 years of age must be kept away from the appliance unless they are constantly supervised. ~ Please supervise children whilst you are working in the kitchen. This appl ...

  • Miele 09 157 540 - page 10

    ~ Safe operation of the appliance is only assured if it has been installed and connected in accordance with these operating and installation instructions. ~ Before connecting the appliance, make sure that the connection data on the data plate (voltage and frequency) matches the mains electricity supply. This data must correspond in order to avoid t ...

  • Miele 09 157 540 - page 11

    ~ The appliance must be isolated from the electricity supply during installation, maintenance and repair work. ~ Faulty components must only be replaced by genuine Miele original spare parts. The manufacturer can only guarantee the safety of the appliance when Miele replacement parts are used. ~ This appliance must not be used in a non-stationary l ...

  • Miele 09 157 540 - page 12

    ~ Do not store cans or bottles containing carbonated drinks or liquids which could freeze in the freezer. The cans or bottles could explode. Danger of injury and damage to the appliance. ~ When cooling drinks quickly in the freezer, make sure bottles are not left in for more than one hour; otherwise they could burst, causing injury or damage. ~ Obs ...

  • Miele 09 157 540 - page 13

    Disposal of your old appliance ~ Before disposing of an old appliance, first make the door latches or locks unusable. This way you will prevent children from accidentally locking themselves in and endangering their lives. ~ Be careful not to damage any part of the pipework whilst awaiting disposal, e.g. by – puncturing the refrigerant channels in ...

  • Miele 09 157 540 - page 14

    Normal energy consumption Increased energy consumption Installation site In a ventilated room. In an enclosed, unventilated room. Protected from direct sunlight. In direct sunlight. Not near to a heat source (radiator, oven). Near to a heat source (radiator, oven). Where the ideal ambient room temperature is approx. 20°C. Where there is a high amb ...

  • Miele 09 157 540 - page 15

    Before using for the first time ^ Clean the inside of the appliance and the accessories with lukewarm water and a little washing up liquid, and then dry with a soft cloth. Important: To ensure the correct functioning of the appliance, let it stand for approx. 1 1/2 - 2 hours, or for approx. 8 hours if it has been transported on its side to its fina ...

  • Miele 09 157 540 - page 16

    You can now – adjust the temperature, or – select the Super freeze function or – switch the ice/water dispenser on or off. Please refer to the relevant section for more information. To finish selecting settings, ^ touch the access sensor so that it is highlighted in white. Your last selected settings will now be saved to memory. If you do not ...

  • Miele 09 157 540 - page 17

    Switching the sensor tone on/off The tone which sounds each time a sensor is touched can be deactivated. ^ Touch the access sensor so that it is highlighted in yellow. ^ Take note of the position of the X sensor (but do not touch it!). ^ Touch the access sensor until it is highlighted in white and all of the other sensors are no longer lit up. ^ Pl ...

  • Miele 09 157 540 - page 18

    Switching off for longer periods of time If the appliance is not going to be used for a longer period of time, e.g. whilst on holiday: ^ switch the appliance off, ^ disconnect it from the mains. ^ turn off the stopcock to the water supply (a few hours before you switch off the appliance), ^ empty the ice cube container, ^ clean the appliance out an ...

  • Miele 09 157 540 - page 19

    It is very important to set the correct temperature for storing food in the appliance. Micro-organisms will cause food which is not stored at the correct temperature to deteriorate rapidly. Temperature influences the growth rate of these micro-organisms. Reducing the temperature reduces their growth rate. To freeze fresh food and to store frozen fo ...

  • Miele 09 157 540 - page 20

    When you have adjusted the temperature, wait for approx. 6 hours if the appliance is not very full and for approx. 24 hours if the appliance is full before checking the temperature display, as it will take this long for the appliance to reach the temperature. If, after this time, the temperature is still too high or too low, you will need to adjust ...

  • Miele 09 157 540 - page 21

    ^ By touching the X sensor, you can now set the temperature to be displayed in Fahrenheit or Celsius. †0 : Temperature in Fahrenheit †1 : Temperature in Celsius † –: Return to menu ^ After selecting a new setting, touch the access sensor to confirm your choice. ^ Now touch the X sensor repeatedly until c appears in the display. ^ Touch the ...

  • Miele 09 157 540 - page 22

    Your appliance has been fitted with a warning system which ensures that the temperature in the appliance cannot rise unnoticed and to avoid energy being wasted if the door is left open. Activating the alarm system The alarm system is always active. It does not have to be switched on manually. Temperature alarm If the temperature in the freezer beco ...

  • Miele 09 157 540 - page 23

    Door alarm The alarm will sound if the door is left open for more than 5 minutes. The sensor for switching the temperature or door alarm off will also light up. The alarm will stop and the sensor for switching the temperature or door alarm off will go out as soon as the door is closed. Switching the door alarm off early If the noise disturbs you, y ...

  • Miele 09 157 540 - page 24

    Super freeze Switch on the Super freeze function before putting fresh food into the freezer. This helps food to freeze quickly and retain its nutrients, vitamins, flavours and appearance. Super freeze is not necessary: – when placing food in the freezer that is already frozen. – when freezing up to 2 kg fresh food in any one day. Switching on S ...

  • Miele 09 157 540 - page 25

    Moving the shelves The shelves can be adjusted according to the height of the food. ^ Hold the shelf on both sides and raise it slightly so that it can be lifted over the catches at the back. ^ Pull the shelf forwards. ^ Place the shelf at the required level, ensuring that it has engaged in the catches at the back. ^ Make sure that the shelf is on ...

  • Miele 09 157 540 - page 26

    Freezer baskets The freezer baskets can also be removed for cleaning. ^ Pull the freezer basket out as far as it will go. There is a safety catch on the door opening side which needs to be turned to a horizontal position in order to remove the basket. ^ Use a screwdriver or similar to turn the slot in the head of the pin to a horizontal position a ...

  • Miele 09 157 540 - page 27

    Maximum freezing capacity To ensure that fresh food placed in the freezer freezes through to the core as quickly as possible, the maximum freezing capacity must not be exceeded. The maximum freezing capacity for freezing within a 24-hour period is given on the data plate: "Freezing capacity ....kg/24 hrs". The maximum freezing capacity gi ...

  • Miele 09 157 540 - page 28

    Home freezing Only freeze fresh food which is in a good condition. Hints on home freezing – The following types of food are suitable for freezing: Fresh meat, poultry, game, fish, vegetables, herbs, fresh fruit, dairy products, pastry, leftovers, egg yolks, egg whites and a range of pre-cooked meals. – The following types of food are not suitab ...

  • Miele 09 157 540 - page 29

    ^ Make a note of the contents and the date of freezing on the packaging. Before placing food in the freezer ^ When freezing more than 2 kg of fresh food, switch on the Super freeze function for some time before placing the food in the freezer (see "Super freeze"). This also helps to prevent food that is already in the freezer from startin ...

  • Miele 09 157 540 - page 30

    Never re-freeze partially or fully defrosted food. Consume defrosted food as soon as possible as it will lose its nutritional value and spoil if left for too long. Defrosted food may only be re-frozen after it has been cooked. Cooling drinks When cooling drinks quickly, make sure bottles are not left in the freezer for more than one hour , as they ...

  • Miele 09 157 540 - page 31

    The ice/water dispenser must be connected to the mains water supply (see "Mains water connection"). Use a suitable container to dispense water and ice cubes into. Danger of glass splinters. Do not hold your hand under the ice/water dispenser spout. Danger of injury. Switching on the ice/water dispenser Before it is used for the first time ...

  • Miele 09 157 540 - page 32

    Switching on the ice/water dispenser Rinse the ice/water dispenser pipework before using it for the first time. ^ Open the appliance door. ^ Make sure that the ice cube container is correctly located underneath the ice cube maker. The ice cube container must be completely shut for ice cubes to be produced. ^ Touch the On/Off sensor for the ice cube ...

  • Miele 09 157 540 - page 33

    Chilled water ^ Place a suitable container underneath the ice/water dispenser spout. ^ Touch and keep your finger on the chilled water sensor. Chilled water will be dispensed from the spout as long as the sensor is being touched. After a while dispensing will stop automatically. Press the sensor again if you wish to dispense more water. Fill the co ...

  • Miele 09 157 540 - page 34

    If the ice/water dispenser is not used again within 2 minutes or if the door is opened, the ice/water dispenser will switch to standby mode automatically and the lighting will go out. After it has been activated again, it can take a few seconds before chilled water and ice can be dispensed again. System lock You can use the system lock to prevent t ...

  • Miele 09 157 540 - page 35

    Switching off the ice/water dispenser The appliance must be disconnected from the mains water supply a few hours before the ice/water dispenser is switched off. ^ Open the appliance door. ^ Touch the On/Off sensor for the ice/water to highlight it in white. Settings mode for ice/water dispenser To enter settings mode ^ Touch the 0 sensor to highlig ...

  • Miele 09 157 540 - page 36

    Ice cube separation To prevent the ice cubes and crushed ice from freezing together and blocking the dispensing spout, the spindle in the ice cube container moves at regular intervals to separate them. You can deactivate this function if the noise disturbs you. Please note: If you deactivate this function, the ice/water dispenser spout can become b ...

  • Miele 09 157 540 - page 37

    This appliance is equipped with a "Frost free" system. The freezer defrosts automatically. The moisture generated by defrosting collects in the condensor and is automatically dissipated by the condensor from time to time. This automatic defrosting system enables the freezer to remain permanently ice-free, however the food stored in the fr ...

  • Miele 09 157 540 - page 38

    Make sure that water cannot get into the electronic unit or into the ventilation gaps. Do not use steam cleaning apparatus to clean the appliance. Steam could reach electrical components and cause a short circuit. The data plate located inside the appliance must not be removed. It contains information which is required in the event of a service cal ...

  • Miele 09 157 540 - page 39

    Aluminium frames The frames on the shelves inside the appliance and on the door baskets are made from aluminium. Aluminium is affected by the way that light falls on it, by the surrounding environment and by the angle you observe it from. It is also susceptible to scratching. The aluminium frames may suffer discolouration or damage if soiling is le ...

  • Miele 09 157 540 - page 40

    Ventilation gaps ^ The ventilation gaps should be cleaned on a regular basis with a brush or vacuum cleaner. A build-up of dust will increase the energy consumption of the appliance. Door seals Do not use any oils or grease on the door seal as these will cause the seal to deteriorate and become porous over time. ^ The door seals should be cleaned r ...

  • Miele 09 157 540 - page 41

    Repairs to electrical appliances should only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. What to do i f... . . . the appliance does n ...

  • Miele 09 157 540 - page 42

    . . . The temperature display for the freezer shows -18 °C, even though I have selected a higher temperature? This is not a fault. If the ice maker is switched on and the room temperature is less than +18 °C, the temperature is automatically set to -18 °C. This is to ensure trouble-free functioning of the ice cube maker. . . . the frozen food is ...

  • Miele 09 157 540 - page 43

    . . . the reminder to change the water filter indicator flashes red. ^ When the reminder to change the water filter flashes red, this indicates that the filter needs to be changed now. ...T h e 0 symbol is flashing in the ice/water dispenser control panel. The ice/water dispenser drip tray is full. ^ Empty the drip tray. . . . The control panel has ...

  • Miele 09 157 540 - page 44

    Remember it can take up to 10 hours to produce the first ice cubes. . . . the ice/water dispenser is only producing small ice cubes. ^ Are other appliances that are connected to the mains water supply being used at the same time? Avoid using the dishwasher, washing machine etc at the same time. ^ Check whether the water filter needs to be changed. ...

  • Miele 09 157 540 - page 45

    ..." _F " and " 121 " appear alternately in the temperature display. The ice cube maker is not connected to the mains water supply. ^ Check whether the appliance is correctly connected to the mains water supply. ^ Check whether the stopcock is open. . . . Another fault message with " _F " appears in the temperature dis ...

  • Miele 09 157 540 - page 46

    Side lighting ^ Turn the lamp cover anti-clockwise to remove it. Do not touch halogen lamps with your bare fingers. Use a soft cloth when changing a halogen lamp. ^ Pull the defective halogen lamp out. ^ Fit the new lamp into the holder. The following type of halogen lamp is required: 5W/1 2V/G4 cap. ^ Replace the lamp cover, turning it clockwise a ...

  • Miele 09 157 540 - page 47

    The appliance is supplied with a stan - dard water filter that filters mains water for making ice cubes. You can replace this with an active charcoal filter which improves the taste and smell of the ice cubes by removing chlorine and other substances from the mains water. Replacement water filters (standard and active charcoal) are available from M ...

  • Miele 09 157 540 - page 48

    To change the water filter Air in the system can cause water to gush out and the filter to spring out when it is removed. Take great care, therefore, when changing the filter. ^ Press the cap in and turn it 180° in an anti-clockwise direction (1). ^ Remove the old filter cartridge (2). ^ Remove the cap from the old filter cartridge (3). ^ Take the ...

  • Miele 09 157 540 - page 49

    ^ After the filter has been changed, the reminder to change the filter will continue to flash in the display. Confirm that the filter has been changed. To confirm that the water filter has been changed ^ Place a finger on the water filter change display and leave it there. ^ Place another finger on the access sensor (do not release the water filter ...

  • Miele 09 157 540 - page 50

    Normal noises What causes them Brrrrr... Humming noise made by the motor (compressor). This noise can get louder for brief periods when the motor is switching on. Blubb, blubb.... A gurgling noise can be heard when coolant is circulating through the pipes. Click.... Clicking sounds are made when the thermostat switches the motor on and off. Sssrrrr ...

  • Miele 09 157 540 - page 51

    In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – Miele (see back cover for contact details). When contacting your Dealer or Miele, please quote the model and serial number of your appliance. This information is given on the data plate inside your applianc ...

  • Miele 09 157 540 - page 52

    Notes on connecting to the mains water supply Connection to the mains water supply should only be carried out by a qualified and competent person in strict accordance with national and local regulations. The water quality must conform to the requirements for drinking water in the country the appliance is being installed in. – This appliance meets ...

  • Miele 09 157 540 - page 53

    Before using the appliance for the first time the water inlet pipe should be purged of air by a qualified and competent person. – To do so the stainless steel hose should be filled as far as possible with water before being connected to the appliance. – Mop up any spillages with a cloth. ^ Lay the stainless steel hose in the building-in niche a ...

  • Miele 09 157 540 - page 54

    Fitting the stainless steel hose to the appliance When fitting the stainless steel hose, make sure that it is neither kinked nor damaged. ^ Remove cap (1) from the water connection at the front of the appliance. ^ Screw coupling nut (2) on stainless steel hose (3) onto the threaded union. ^ Ensure that all connections are watertight. ^ Turn on the ...

  • Miele 09 157 540 - page 55

    Electrical connection U.K. All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). The appliance is supplied with a mains cable and moulded plug ready for connection to an a.c. single phase 220-240 V 50 Hz supply. Please ensur ...

  • Miele 09 157 540 - page 56

    Location This appliance should be installed in a dry, well-ventilated room. It should not be installed where it is exposed to direct sunlight or directly adjacent to a heat-producing appliance such as an oven or a radiator. The room temperature should not go above or below the climate range for which the appliance is designed. The higher the ambien ...

  • Miele 09 157 540 - page 57

    Safe operation of the appliance is only assured if it has been installed and connected in accordance with these operating and installation instructions. Warning! This appliance is very heavy and can tip forwards when the door is open. Keep the door shut until the appliance has been built in and secured within the building-in niche in accordance wit ...

  • Miele 09 157 540 - page 58

    Floor To ensure the safe installation of the appliance and to guarantee its correct functioning, the floor to the niche where the appliance is to be installed must be smooth and even. It must be made from strong, rigid material. The appliance is extremely heavy when fully loaded, and for this reason it is imperative that the floor it stands on is a ...

  • Miele 09 157 540 - page 59

    Side-by-side installation This appliance may be installed "side-by-side" with another suitable refrigerator or freezer. A side-by-side installation kit, available from Miele, is required. Ask your dealer which appliances are suitable for side-by-side installation with this appliance. See the instructions supplied with the side-by-side ins ...

  • Miele 09 157 540 - page 60

    Appliance door dimensions (opening angle 115°) AB C D F 1471 Vi 525 mm Door front (max. 38 mm)* Door handle* 234 mm * The dimensions for the door fronts and handles will vary according to the individual kitchen. Miele recommends using the full door opening angle of 115° for this freezer. Installation advice 60 ...

  • Miele 09 157 540 - page 61

    Niche width A F 1471 Vi 457 mm – 460 mm Building-in dimensions 61 ...

  • Miele 09 157 540 - page 62

    Laying the electrical cabling and the pipework for the mains water supply Door front dimensions Building-in dimensions 62 ...

  • Miele 09 157 540 - page 63

    Due to the size and weight of the appliance, it is essential that installation is carried out by two people. Tools and accessories required – Cordless screwdriver – Torx screwdriver – Hammer drill – Drill bits in various sizes, depending on materials – Hammer – Socket wrench with: hexagonal bit (8 mm) – Adhesive tape – Pipe wrench ? ...

  • Miele 09 157 540 - page 64

    Stainless steel fronts Stainless steel fronts and stainless steel look plinth grilles are available from your dealer or the Miele Spare Parts Department. Weight of the door front Before fitting the door/drawer fronts, ensure that the weight of the fronts does not exceed the maximum permitted: Appliance Max. weight of door front in kg F 1471 Vi 65 F ...

  • Miele 09 157 540 - page 65

    Aligning the housing unit The housing unit must be carefully aligned using a spirit level before installing the appliance. The unit corners must be at right angles, as otherwise the furniture door will not align correctly with the 4 corners of the appliance. – The side panels of the housing must be even. – The housing unit panels must be at lea ...

  • Miele 09 157 540 - page 66

    ^ Do not remove the installation aids from the appliance door. These will be required later when the appliance is installed in the building-in niche. ^ Check the appliance for damage during transportation. Do not install a damaged appliance! ^ Unscrew the bracket that is holding the appliance to the delivery pallet. , Warning! Please bear in mind t ...

  • Miele 09 157 540 - page 67

    Anti-tipping mechanism The anti-tipping mechanism ensures that the appliance is fixed securely into the building-in niche, preventing the appliance from tipping forwards. Use two anti-tipping mechanisms for each appliance or side-by-side pair of appliances. If the building-in niche is deeper than the appliance, screw a solid wooden beam a to the fl ...

  • Miele 09 157 540 - page 68

    If the anti-tipping mechanism supplied cannot be fixed in the niche , the furniture unit must be firmly screwed to the wall behind to prevent the built-in appliance from tipping. For a unit with a back panel ^ screw the back panel directly onto the wall behind in a number of places. Use suitable wall plugs/fixing screws depending on the condition o ...

  • Miele 09 157 540 - page 69

    An alternative anti-tipping mechanism The appliance can alternatively be secured with a wooden beam across the top of the appliance. If this method is used, then there must not be any gap between the appliance and the wooden beam. – The wooden beam must be at least 75 mm x 100 mm thick. – The length must be the same as the width of the building ...

  • Miele 09 157 540 - page 70

    Placing the appliance in the niche If you are installing two appliances side by side, now secure the appliances to one another (see the instructions for the side-by-side installation kit). ^ Unscrew the plinth facing. ^ Secure the edge protector supplied a to protect the adjacent furniture fronts. ^ Plug in the appliance b . Connection should be ma ...

  • Miele 09 157 540 - page 71

    Aligning the appliance ^ Align the appliance with neighbouring furniture fronts. The installation aids e on the appliance door are suitable for the following thicknesses of furniture door front: 19 mm or 38 mm. The adjustable feet at the front and back of the appliance can be adjusted from the front. – Front feet: Adjust from the top with a socke ...

  • Miele 09 157 540 - page 72

    Securing the appliance in the niche ^ Screw the lugs for the fixing plates h into the furniture/units above the appliance. If it is not possible to secure the appliance above, it can be attached to the niche at the sides only. ^ Pull out the lugs for the side fixing plates i . ^ Screw on the lugs for the side plates. ^ If necessary, cut trim j to t ...

  • Miele 09 157 540 - page 73

    When installing two appliances side by side , the filler strips for the two appliances need to be joined together to form one long strip. ^ Insert the joining peg from the side-by-side kit halfway into the channel in the filler strip for the left-hand appliance. ^ Then insert the free half of the joining peg into the channel on the other strip, and ...

  • Miele 09 157 540 - page 74

    Preparing the furniture front ^ Remove the door basket. ^ Open the appliance door as far as it will go. ^ Unscrew the installation aids n and angle trim o from the appliance door. ^ Put the angle trim o and screws in a safe place - they will be required later. ^ Take the cover off the light contact switch. ^ Close the appliance door. ^ Measure gap ...

  • Miele 09 157 540 - page 75

    ^ Mark gap X on the inside of the furniture front. ^ Similarly, locate and mark the midpoint Y on the furniture front. ^ Remove the fixing frame from the appliance door and position it corresponding to the markings on the furniture front. ^ Pre-drill the holes. ^ Screw the fixing frame to the furniture front, using at least one screw for each fixin ...

  • Miele 09 157 540 - page 76

    Securing and aligning the furniture door ^ Insert the angle trim as far as it will go into the spaces in the frame, as shown. ^ Open the appliance door and hang the furniture front on its frame onto the threaded bolts, as shown p ^ Press the angle trim on both sides into the white plastic frame, and screw them down securely. ^ Screw the nuts q loos ...

  • Miele 09 157 540 - page 77

    Securing the covers ^ Fit the two cover strips to the sides of the appliance door, clicking them into the space between the appliance door and the furniture front, starting at the bottom and working up to the top. ^ Secure the retaining clips for the space covers on both sides. ^ Now attach the covers onto the retaining clips on both sides. In the ...

  • Miele 09 157 540 - page 78

    Fitting the plinth facing Do not cover the vents in the plinth. This could result in damage to the appliance. ^ Trim the plinth facing to the required length and height (cut along the lower edge of the plinth facing where it touches the floor). ^ Secure the plinth to the appliance, and attach the cover caps supplied. ^ Now fit the plinth facing. Fi ...

  • Miele 09 157 540 - page 79

    Aligning the ice/water dispenser If necessary the depth of the ice/water dispenser can be aligned to line up with the furniture front. Disconnect the appliance from the mains. ^ Push back on the dispenser spout and then pull it downwards to remove it. ^ Remove the drip tray cover and the grid. ^ Loosen the screws in the back cover. ^ Pull the locki ...

  • Miele 09 157 540 - page 80

    ^ Remove the rear cover. ^ Loosen the level sensors and carefully bend them upwards. ^ Remove the drip tray. If necessary use a screwdriver to gently lever it out. Once the drip tray has been removed you can align the position of the ice/water dispenser using the four metal strips. ^ Loosen the screws in the four metal strips. ^ Then insert a screw ...

  • Miele 09 157 540 - page 81

    Securing the ice/water dispenser frame The word "TOP" is marked on the rear of the frame at the top. With 19 mm thick furniture fronts: ^ Fit the frame onto the ice/water dispenser and press it firmly into position so that it sits evenly with the furniture front. With 38 mm thick furniture fronts: ^ Fit the secondary trim to the frame. ^ ...

  • Miele 09 157 540 - page 82

    82 ...

  • Miele 09 157 540 - page 83

    83 ...

  • Miele 09 157 540 - page 84

    Alteration rights reserved / 4111 F 1471 Vi M.-Nr. 09 157 540 / 00 ...

Manufacturer Miele Category Refrigerator

Documents that we receive from a manufacturer of a Miele 09 157 540 can be divided into several groups. They are, among others:
- Miele technical drawings
- 09 157 540 manuals
- Miele product data sheets
- information booklets
- or energy labels Miele 09 157 540
All of them are important, but the most important information from the point of view of use of the device are in the user manual Miele 09 157 540.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Miele 09 157 540, service manual, brief instructions and user manuals Miele 09 157 540. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Miele 09 157 540.

Similar manuals

A complete manual for the device Miele 09 157 540, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Miele 09 157 540 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Miele 09 157 540.

A complete Miele manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Miele 09 157 540 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Miele 09 157 540, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Miele 09 157 540, that we can find in the current document
3. Tips how to use the basic functions of the device Miele 09 157 540 - which should help us in our first steps of using Miele 09 157 540
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Miele 09 157 540
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Miele 09 157 540 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Miele 09 157 540?

Use the form below

If you did not solve your problem by using a manual Miele 09 157 540, ask a question using the form below. If a user had a similar problem with Miele 09 157 540 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)