English dropdown-ico

Manual Polycom 1725-36028-001

110 pages 1.17 mb
Download

Go to site of 110

Summary
  • Polycom 1725-36028-001 - page 1

    SpectraLink 8000 Telephony Gateway Administration Guide Utilizing SpectraLink Radio Protocol (SRP) July 2008 Edition 1725-36028-001 Version T ...

  • Polycom 1725-36028-001 - page 2

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Trademark Information Polycom® and the logo designs SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registered trademarks of Polycom , Inc. in the U nited States of America and various countrie s. All other trademarks used herein are the prope rty of their respective owners. Pat ...

  • Polycom 1725-36028-001 - page 3

    About This Guide This document explains how to in stall, configure, administer, and troubleshoot the SpectraLink 8000 Telephony Gateway. Polycom Model Numbers This document covers the following registered model numbers: TGA108, TGA116, TGU108, TGU116 Referenced Documents SpectraLink 8000 SVP Server Administration Guide for SRP (1725-36032-001) Spec ...

  • Polycom 1725-36028-001 - page 4

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Deploying Enterprise-Grade Wi-Fi Telephony Available at http://www.polycom.com/common/documents/products /voice/m obile/bestpractices_SLNK_032708.pdf Best Practices Guide for Deploying SpectraLink 8020/8030 Wireless Telephones Available at http://www.polycom.com/common/documents/products /v ...

  • Polycom 1725-36028-001 - page 5

    Contents 0 About This Guide ..................................................................... 3 Polycom Model Numbers ..................................................................3 Referenced Documents ......................................................................3 Customer Support .................................................. ...

  • Polycom 1725-36028-001 - page 6

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Install Telephone Demarc Blocks ...................................................25 Assign and Program Telephone Ports ...........................................25 Connect Telephone Lines to Demarc Blocks .................................25 5 Pre-Installation Verification ............... ...

  • Polycom 1725-36028-001 - page 7

    Contents 9 Main Menu ............................................................................. 53 10 Network Configuration .......................................................... 55 11 Set or Change Password ....................................................... 59 12 SpectraLink 8000 Telephony Gateway Configuration ....... 61 Reset the Spe ...

  • Polycom 1725-36028-001 - page 8

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide 19 Troubleshooting via the System Status Menu ..................... 91 Access Point Status ...........................................................................93 Error Status ........................................................................................94 Network Status ... ...

  • Polycom 1725-36028-001 - page 9

    1 SpectraLink Overview The SpectraLink 8000 Telephony Gateway provides telephone functionality to SpectraLink Wirele ss Telephones over a wireless local area network (LAN). The installation process connects the Gateway to an existing host telephone system a nd LAN. The configuration process covers downloading current software, setting network param ...

  • Polycom 1725-36028-001 - page 10

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Up to forty SpectraLink 8000 Telephony Gateways may be connected to the LAN for a maximum capacity of 640 SpectraLink Wireless Telephones. When five or more SpectraLink 8000 Telephony Gateways are installed, the SpectraL ink 80 00 SVP Server must also be installed to manage the increased lo ...

  • Polycom 1725-36028-001 - page 11

    SpectraLi nk Overvie w System Speed SpectraLink Wireless Telephones can operate up to 54 Mb/s in 802.11a and 802. 11g modes, and up to 11 Mb/s in 802.11b an d b/g- mixed modes. In the b and b/g-mixed modes, if certain versions of legacy SpectraLink Wireless Telephon es are used in the system, all handsets running in that mode w ill operate at the l ...

  • Polycom 1725-36028-001 - page 12

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide 8000 Telephony Gateway that works with teleph one systems (CO, PBX, or Key Systems) with analog (loop start) ports. Access points Access points (APs) are supplied by third party vendors, APs provide the connection between the wired Ethernet LAN and the wireless (802.11) LAN. APs must be pos ...

  • Polycom 1725-36028-001 - page 13

    SpectraLi nk Overvie w SpectraLink 8000 SVP Server The SpectraLink 8000 SVP Server manages call volume and speed. It is required in any system when five or more SpectraLink 8000 Telephony Gateways are connected to the LAN. With 40 SpectraLink 8000 Telephony Gateways cabled together, a sin gle SpectraLink 8000 SVP Server supports 120 simultane ous h ...

  • Polycom 1725-36028-001 - page 14

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide System Diagram 1725-36028-001_T.doc optional SpectraLink 8000 Telephony Gateway SpectraLink 8000 Telephony Gateway SpectraLink 8000 Telephony Gateway SpectraLink 8000 Telephony Gateway SpectraLink 8000 Telephony Gateway SpectraLink 8000 SVP Server Ethernet switch Access point Administrative ...

  • Polycom 1725-36028-001 - page 15

    SpectraLi nk Overvie w The Front Panel of the SpectraLink 8000 Telephony Gateway The SpectraLink 8000 Telephony Gateway's front panel contains the connections to other SpectraLink 8000 Telephony Gateways, t he telephone system and LAN, as well as status LEDs. PWR CONN B CONN A E R R O R 1 2345 ST A TUS ! RS-232 L N K O K A C T C O L IPC NETWOR ...

  • Polycom 1725-36028-001 - page 16

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide 4 : Timing Master 5 : Lit if this gateway is the master gateway, used for timing only 8 = Conn A, Conn B : RJ-21 connector to the telephone cross-connect demarc block. Connector B is used only with four-wire interface Digital SpectraLink 8000 Telephony Gateways that work with the most commo ...

  • Polycom 1725-36028-001 - page 17

    2 Installation and Configuration Steps Installation and configuration has several phases. In som e cases, a separate person is responsible for each phase. It i s important to coordinate the activities am ong the persons involved. The customer or vendor installs the APs per the Configuration Guide for the AP being used. This is normally done before ...

  • Polycom 1725-36028-001 - page 18

    ...

  • Polycom 1725-36028-001 - page 19

    3 Site Preparation As shown in the system diagram in the previous section, the SpectraLink 8000 Telephony Gateway is connected to both t he Ethernet switch and the wired telephone system; the SpectraLink 8000 SVP Server is connected to the Ethernet switch only. The specifications covered here allow for great flexibil ity in physical placement of th ...

  • Polycom 1725-36028-001 - page 20

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide wall. Four #8 x 3/4” panhead wood screws (or similar device) are required for each component. • 10BaseT Cables : RJ-45 connector at each SpectraLink 8000 Telephony Gateway. Connection to Ethernet switch. • CAT 5 C able : RJ-45 connector at the SpectraLink 8000 SVP Server. Connection t ...

  • Polycom 1725-36028-001 - page 21

    Site Preparati on LAN Requirements Network infrastructure The SpectraLink 8000 Telephony Gateway connects to your local area network (LAN). To provide adequate bandwidth and limit collisions, an Ethernet switch is required. Th e traffic between the SpectraLink 8000 Telephony Gateway and wireless LAN APs should be isolated as much as possible to avo ...

  • Polycom 1725-36028-001 - page 22

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide IP multicast addresses are used by the SpectraLink i640 and 8030 Wireless Telephone. This requires that multicasting be enabled on the subnet used for the SpectraLink Wireless Telephones, SVP Server, and Telephony Gateways. Routers are typically configured with filters to prevent multicast ...

  • Polycom 1725-36028-001 - page 23

    4 Telephone Interface Configuration The customer or the customer's wire contractor is responsible for adhering to all local codes for wiring . Prepare Demarcation (Demarc) Blocks The SpectraLink 8000 Telephony Gateway is connected to the existing telephone system using RJ-21 connections. A SpectraLink 8000 Telephony Gateway is designed to oper ...

  • Polycom 1725-36028-001 - page 24

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide your site will use administration by modem, this connection should be included in the wiring installation. 24 PN: 1725-36028-001_T.doc ...

  • Polycom 1725-36028-001 - page 25

    Telephone I nterface Confi guration Install Telephone Demarc Blocks The demarcation blocks used to connect the telephone system to the Telephony Gateway should be inst alled on 3/4” telephone facility backboard. Although this manual uses 66-blocks as examples, any standard cross-connect blocks are acceptable. Assign and Program Telephone Ports Th ...

  • Polycom 1725-36028-001 - page 26

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Two-wire analog or digital demarc block The demarc block for the two-wire analog or digital interface should be wired as follows. LINE1 tip ring LINE 2 tip ring LINE 3 tip ring LINE 4 tip ring LINE 5 tip ring LINE 6 tip ring LINE 7 tip ring LINE 8 tip ring LINE 9 tip ring tip ring tip ring ...

  • Polycom 1725-36028-001 - page 27

    Telephone I nterface Confi guration Four-wire digital demarc block (Connector A) The four-wire digital interface requ ires two demarc blocks, one to Connector A and one to Connector B on the SpectraLink 8000 Telephony Gateway. They should be wired as follows. Line 1 TX tip ring Line 2 TX tip ring Line 3 TX tip ring Line 4 TX tip ring Line 5 TX tip ...

  • Polycom 1725-36028-001 - page 28

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Four-wire digital demarc block (Connector B) Line 1 RX tip ring Line 2 RX tip ring Line 3 RX tip ring Line 4 RX tip ring Line 5 RX tip ring Line 6 RX tip ring Line 7 RX tip ring Line 8 RX tip ring Line 9 RX tip ring Line 10 RX tip ring Line 11 RX tip ring Line 12 RX tip ring Line 13 RX tip ...

  • Polycom 1725-36028-001 - page 29

    5 Pre-Installation Verification Verify Pre-Installation Requirements Check the site to be sure pre-installation work has been completed correctly. This includes: • Location chosen for the SpectraLink 8000 Telephony Gateway is adequate and power is available. • APs are interoperable with SVP and coverage is adequate. • Telephone lines for the ...

  • Polycom 1725-36028-001 - page 30

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide • Screws : Four, 3/4”, #8 panhead screws for each SpectraLink 8000 Telephony Gateway to be wall mounted. • Star Washers : When installing multiple SpectraLink 8000 Telephony Gateways, two per SpectraLink 8000 Telephony Gateway, to provide static protection. • ESD Bonding Straps : Wh ...

  • Polycom 1725-36028-001 - page 31

    6 Install SpectraLink 8000 Telephony Gateway Mount to Rack or Wall The SpectraLink 8000 Telephony Gateways can be wall mounted either horizontally or vertically. Gateways may also be rack mounted in a standard 19-inch rack. A Rack Mount Kit must be purchased separately for a rack mount installation. To Mount Gateways… Connector A is… Mount the ...

  • Polycom 1725-36028-001 - page 32

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Mount the SpectraLink 8000 Telephony Gateway to rack The Rack Mount Kit is designed for mounting equipment in a standard 19-inch rack and should contain the following equipment: • Mounting plates: Two for each Gateway to be mounted. • Screws: Four rack mount screws for each Gateway to b ...

  • Polycom 1725-36028-001 - page 33

    Install SpectraLink 8000 Tel ephony Gate way All system units must be grounded to a protective earth by means of the grounding stud located on the re ar panel. Refer to the illustration below for recommended continuity connection. No more than 15 units may be grounded through one connection to the protective earth ground. Systems involving more tha ...

  • Polycom 1725-36028-001 - page 34

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Installing Multiple SpectraLink 8000 Telephony Gateways If installing more than one Spectr aLink 8000 Telephony Gateway, the ESD bonding strap(s) must be installed between adjacent Gateways. Mount Gateway 1. See directions for installing a sing le Gateway in previous section. Measure carefu ...

  • Polycom 1725-36028-001 - page 35

    Install SpectraLink 8000 Tel ephony Gate way Install IPC cables To connect IPC cables on four or fewer SpectraLink 8000 Telephony Gateways (without a SpectraLink 8000 SVP Server): 1. Mount the SpectraLink 8000 Telephony Gateways. 2. Connect the IPC cable from the IPC OUT Port of the first unit to the IPC IN Port of the adjacent unit. 3. Repeat step ...

  • Polycom 1725-36028-001 - page 36

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide When installing a system with four or fewer SpectraLink 8000 Telephony Gateways and a SpectraLink 8000 SVP Server, no IPC cables are required. For this configu ration, follow the directions for connecting five or more SpectraLink 8000 Telephony Gateways. Connect five or more SpectraLink 800 ...

  • Polycom 1725-36028-001 - page 37

    Install SpectraLink 8000 Tel ephony Gate way Use only the provided Class II AC Adapter with output 24V DC, 1A. For proper operation, all SpectraLink 8000 Telephony Gateways must be powered on and off at the same time. For installations with more than one SpectraLink 8000 Telephony Gateway, use an outlet strip with a built in power switch to allow S ...

  • Polycom 1725-36028-001 - page 38

    ...

  • Polycom 1725-36028-001 - page 39

    7 SpectraLink 8000 Telephony Gateway Administration Overview The SpectraLink 8000 Telephony Gate way(s) and wireless telephones are administered and maintained thro ugh a series of menu options for each SpectraLink 8000 Telephon y Gateway in the system. The SpectraLink 8000 SVP Server has a separate set of menus th at are covered in a separate docu ...

  • Polycom 1725-36028-001 - page 40

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Administration Console. They ar e administered independentl y as covered in the Configuration Guide for the specific type of AP in use. 40 PN: 1725-36028-001_T.doc ...

  • Polycom 1725-36028-001 - page 41

    SpectraLink 8000 Tel ephony Gateway Admi nistrati on Overvi ew SpectraLink 8000 Telephony Gateway Configuration Sequence This section covers the steps that must be taken to configure the SpectraLink 8000 Telephony Gateway for operation. The usual course of setup procedures will follow these general steps in the following order: 1. Configure the APs ...

  • Polycom 1725-36028-001 - page 42

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide to highlight Reset All Systems and pr ess Enter. Respond with a Y to the reset prompt. 7. For each Gateway, assign handsets to telephone lines controlled by each SpectraLink 8000 Telephony Gateway per Chapter 13 , Telephone Line Configuration. 8. For each Gateway (using Send All as indicate ...

  • Polycom 1725-36028-001 - page 43

    SpectraLink 8000 Tel ephony Gateway Admi nistrati on Overvi ew Navigating through the Administration Console Screens Use the following keys to move around the Administration Console screens. To Perform this Function: Press: Select function from menu Use arrow ke ys to highlight selection, press Enter Display menu associated with highlighted field E ...

  • Polycom 1725-36028-001 - page 44

    ...

  • Polycom 1725-36028-001 - page 45

    8 Connecting to the SpectraLink 8000 Telephony Gateway For the initial configuration of each SpectraLink 8000 Telephony Gateway, you should have the Wireless Device Planning Worksheet(s) that was filled out during the installation of the system. There should be one for each SpectraLink 8000 Telephony Gateway. The following items included in the Wor ...

  • Polycom 1725-36028-001 - page 46

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide 2. Run a terminal emulation progra m (such as HyperTerminal™) or use a VT-100 terminal with the following configuration: Bits per second: 9600 Data bits: 8 Parity: None Stop bits: 1 Flow control: None 3. Press Enter to display the SpectraLink 8000 Telephony Gateway login screen. 4. Enter ...

  • Polycom 1725-36028-001 - page 47

    Connecting to the Spectr aLink 8000 Telephony Gate way If using a serial connection, only the SpectraLink 8000 Telephony Gateway that is connected via the serial cable is shown. 1. From the NetLink 8000 System menu, navigate to the Network Configuration screen and set the IP address. Note that the Allow Telnet Connections option must remain at the ...

  • Polycom 1725-36028-001 - page 48

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Configuration screen. Use the arrow keys to highlight Reset All Systems and press Enter. Respond with a Y to t he reset prompt. Note that after IP addresses are estab lished and the SpectraLink 8000 Telephony Gateways are functioning on the LAN, the S =Send All command can be used to send c ...

  • Polycom 1725-36028-001 - page 49

    Connecting to the Spectr aLink 8000 Telephony Gate way Connecting via Telnet In addition to the serial connection described in the previous section, connection to the SpectraLink 8000 Telephony Gateway may be done via the network using Telnet. Once the IP addresses are configured, every SpectraLink 8000 Telephony Gateway is accessible through a con ...

  • Polycom 1725-36028-001 - page 50

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide The following settings use the US Robotics ® Sportster ® modem. Othe r modem models may be used, but the particular model’s settings will have to be adapted to conform to those listed in the following table. Configure modem internal settings (US Robotics Sportster) 1. Connect the modem ...

  • Polycom 1725-36028-001 - page 51

    Connecting to the Spectr aLink 8000 Telephony Gate way Connect the modem Unplug the modem from the PC’s serial port and plug it into the SpectraLink 8000 Telephony Gateway. Connecting via Internal Modem An internal 2400-baud modem is built into the SpectraLink 8000 Telephony Gateway. Line one can be configured to connect via this modem. The modem ...

  • Polycom 1725-36028-001 - page 52

    ...

  • Polycom 1725-36028-001 - page 53

    9 Main Menu The NetLink 8000 System menu provides a list of options for the maintenance of the SpectraLink 8000 Telephony Gateway and the handsets it supports. Menu Option Function System Status Provides status of SpectraLink 8000 Tel ephony Gateway and its communications lin ks. Used to view the system o peration and troubleshoot problem areas. Te ...

  • Polycom 1725-36028-001 - page 54

    ...

  • Polycom 1725-36028-001 - page 55

    10 Network Configuration IP address and additional LAN se ttings are set and changed in the Network Configuration screen, available from the NetLink Wireless Telephone System menu. Scroll to remaining options: The options listed below with the arrow bullet ¾ are minimal settings required for SpectraLink 8000 Telephony Gateway functioning. Addition ...

  • Polycom 1725-36028-001 - page 56

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide settings until you have studied this section and are familiar with the consequences any change will produce. When the settings marked with an arrow bullet ¾ are changed, the SpectraLink 8000 Telephony Gateway automatically goes into Maintenance Lock and prevents any new calls from starting ...

  • Polycom 1725-36028-001 - page 57

    Network Configurati on correct setting from the DHCP server . The DHCP setting is only valid when the IP address is also acquired using DHCP. WINS servers : These setting are used for Windows Internet Name Services. Consult your system administrator for the correct settings. These can also be set to DHCP. This will cause the DHCP client in the gate ...

  • Polycom 1725-36028-001 - page 58

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Press Esc to return to the SpectraLink 8000 System menu. Note that resetting the SpectraLink 8000 Telephony Gateway(s) will terminate any calls in progress on the SpectraLink 8000 Telephony Gateway(s) being reset. All SpectraLink 8000 Telephony Gateways should be reset at the end of any mai ...

  • Polycom 1725-36028-001 - page 59

    11 Set or Change Password Passwords may be set uniquely for each SpectraLink 8000 Telephony Gateway. If this is done, each must be administered independently and the Send All command will not work. If Send All is to be utilized in your system, all passwords must be identical. Once all SpectraLink 8000 Telephony Gateways are on the LAN, a global pas ...

  • Polycom 1725-36028-001 - page 60

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide If you forget a password, call Polycom Customer Service for assistance. In order for Send All to function across all SpectraLink 8000 Telephony Gateways, all passwords must be identical. If one or more SpectraLink 8000 Telephony Gateways are configured with different passwords, the Send All ...

  • Polycom 1725-36028-001 - page 61

    12 SpectraLink 8000 Telephony Gateway Configuration Select Gateway Confi guration from the NetLink Wireless Telephone System menu. Scroll to remaining option: The options listed below with the arrow bullet ¾ are minimal settings required for SpectraLink 8000 Telephony Gateway functioning. Do not change settings until you have studied this section ...

  • Polycom 1725-36028-001 - page 62

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Where available, S=Send All may be used to send identical configuration settings to every other SpectraLink 8000 Telephony Gateway in the system. ¾ Telephone Switch Typ e : Press Enter to change this field. From the sub-menu of PBX types, select the telephone swi tch type you are using. ¾ ...

  • Polycom 1725-36028-001 - page 63

    SpectraLink 8000 Tel ep hony Gateway Configuration Telephony Gateway. Software updates received from Polycom must be placed in this location. See section 18, Software Maintenance, for more information. When the handse t is turned on, it checks t his source for confirmation that it is running the correct software version. If there is any discrepancy ...

  • Polycom 1725-36028-001 - page 64

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide The SpectraLink 8000 Telephony Gateway monitors the condition of any SpectraLink 8000 SVP Server(s) on the system. In a single SpectraLink 8000 SVP Server system, when the SVP Server goes into Maintenance Lock, the Telephony Gateway will also lock and set an alarm. No new calls will be allo ...

  • Polycom 1725-36028-001 - page 65

    SpectraLink 8000 Tel ep hony Gateway Configuration Reset the SpectraLink 8000 Telephony Gateway Note that resetting the SpectraLink 8000 Telephony Gateway(s) will terminate any calls in progress on the SpectraLink 8000 Telephony Gateway(s) being reset. All SpectraLink 8000 Telephony Gateways should be reset at the end of any maintenance procedure t ...

  • Polycom 1725-36028-001 - page 66

    ...

  • Polycom 1725-36028-001 - page 67

    13 Telephone Line Configuration Telephone line configuration is perf ormed after the initial SpectraLink 8000 Telephony Gateway installation is complete and the Gateway is configured. The configuration proced ure associates a handset with its telephone port in the Spectr aLink 8000 Telephony Gatewa y. For the line configuration of handsets, please ...

  • Polycom 1725-36028-001 - page 68

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide 1. Navigate to the NetLink Wireless Telephone System menu for the SpectraLink 8000 Telephony Gateway that serves the port to be configured. Select Telephone Line Configuration . 2. Enter the following information fo r each assigned line. Use the arrow keys to navigate through the fields. MA ...

  • Polycom 1725-36028-001 - page 69

    Telephone Li ne Configuration A handset may be associated with one and only one telephone line. The same MAC address may not be assigned to two or more telephone lines. Deleting a Handset To delete a handset from the SpectraLink 8000 Telephony Gateway configuration: 1. Navigate to the NetLink Wireless Telephone System menu of the SpectraLink 8000 T ...

  • Polycom 1725-36028-001 - page 70

    ...

  • Polycom 1725-36028-001 - page 71

    14 Features Programming Menu Two basic types of wired telephone systems exist—analog and digital. Both types offer special features such as hold, transfer, conference, camp on, and speed dial. In both types of systems, these feat ures are activated in a telephone by pressing a series of keys or a single programmed button on a deskset. The Feature ...

  • Polycom 1725-36028-001 - page 72

    ...

  • Polycom 1725-36028-001 - page 73

    15 Feature Programming (no Softkeys) If your system is utilizing any Sp ectraLink Wireless Telephones that do not have softkeys (PT800 series or earlier), Feature Progra mming is used to allow these handsets to access system features. Mute and optional OAI (Open A pplication Interface) must be programmed in the Feature Programming screen for both a ...

  • Polycom 1725-36028-001 - page 74

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Navigate to the NetLink Wireless Telephone System menu for the SpectraLink 8000 Telephony Gateway and select Feature Programming . A screen similar to the following displays: Programming Digital PBX Features The numbers and symbols along the le ft side of the screen indicate which number or ...

  • Polycom 1725-36028-001 - page 75

    Features Programming ( no Softkeys) you change them, be sure to enter the corresponding changes in the Menu Programming screen in the next section. Function Key Feature Key Sequence FCN+1 Mute MUTE FCN+2 Xfer FCN+3 Conn FCN+4 Conf FCN+5 Fwd FCN+6 Redial FCN+7 Pick FCN+8 Camp FCN+9 Exit Menus (Leave Blank) FCN+0 FCN+* FCN+# Consult your wired teleph ...

  • Polycom 1725-36028-001 - page 76

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Programming the ADMIN Feature The ADMIN option allows the system administrator to add and delete handsets via another handset, rather than via th e SpectraLink 8000 Telephony Gateway. Any function key sequence may be programmed to ADMIN by typing ADMIN next to the desired key. The ADMIN fea ...

  • Polycom 1725-36028-001 - page 77

    16 Menu Programming (no softkeys) If your system is utilizing any Sp ectraLink Wireless Telephones that do not have softkeys (PTB800 series or earlier), Menu Progr amming is used to enable these handsets to display a list of system features that have been programmed for end user access. The handset displays a menu of functions when the FCN key is p ...

  • Polycom 1725-36028-001 - page 78

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide • For analog interfaces, the features defined for the custom menus should match the features programmed in the Feature Programming screen. For example, if you have defined FCN 2 on Feature Programming as Xfer , then you should also define FCN 2 on Menu Programming as Xfer . • For digita ...

  • Polycom 1725-36028-001 - page 79

    Features Programming ( no Softkeys) 4. Repeat for each menu as needed. PN: 1725-36028-001_T.doc 79 ...

  • Polycom 1725-36028-001 - page 80

    ...

  • Polycom 1725-36028-001 - page 81

    17 Softkey and Shortcut Key Programming The softkeys on the SpectraLink e340/h340/i640 and 8020/8030 Wireless Telephones enable quick access to system features. The softkey programming screen estab lishes the correspondence between the PBX features, the softkeys, and the shortcut keys. There are 16 possible features disp layed in the four levels of ...

  • Polycom 1725-36028-001 - page 82

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Sample screen: Scroll to remaining options: The Action column indicates that the handset will perform the corresponding function of the emulat ed desk set. Action field entries are described in the table on the next page. The Menu Label is a description of the feature. T he Softkey L abel i ...

  • Polycom 1725-36028-001 - page 83

    Softkey and Short cut Key Programming Speakerphone softkey programming (SpectraLink 8020/8030 only) The SpectraLink 8020/8030 Wireless Telephones have an int ernal speakerphone which is activated through a softkey. Polycom recommends programming Level 0, softkey A for the speakerphone as that position matches the st andby position the handset autom ...

  • Polycom 1725-36028-001 - page 84

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Use this table to develop your own programming correspondence: Level Softkey Shortcut Menu Label Softkey Label Action 0 A B C D 1 A B C D 2 A B C D 3 A B C D 84 PN: 1725-36028-001_T.doc ...

  • Polycom 1725-36028-001 - page 85

    Software Maintenance The SpectraLink 8000 Telephony Gateways and the wireless telephones use proprietary software programs written and maintained by Polycom Corporation. The software versions that are running on the system components can be displayed via the System Status screen. Downloads for the SpectraLink 8000 Telephony Gateway are available fr ...

  • Polycom 1725-36028-001 - page 86

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide SpectraLink 8020/8030 Wireless Telephones Automatic from SpectraLink 8000 Telephony Gatewa y or TFTP Server*** *** as set in the Gateway Configuration screen, WT TFTP Do wnload Master, IP address. pd14udsp.bin pd14csp.bin pi1400sp.bin pd14odsp.bin slnk_cfg.c fg SpectraLink 8000 SVP Server L ...

  • Polycom 1725-36028-001 - page 87

    Software Maintenance When using FTP, use a host system to connect t o a remote system. In this example, the host is the clie nt and the server is the Telephony Gateway. The “put” command means to copy t he files from the host to the remote system. The “get” command mean s to copy the files from the remote system to the host. Note that FTP c ...

  • Polycom 1725-36028-001 - page 88

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Updating Wireless Telephone Software SpectraLink handsets allow over-the-a ir transfer of software updates from the SpectraLink 8000 Telephony Gateway or designated TFTP server to the handsets. The downloader function in the han dset checks its software version every time the handset is tur ...

  • Polycom 1725-36028-001 - page 89

    Software Maintenance Download failure or recovery messages The following display messages indicate a failure or recovery situation during the download process. Message Description Server Busy Handset is attempting to download from a Downlo ad Master that is busy downloading oth er phones and refusing additional do wnlo ads. The handset will automat ...

  • Polycom 1725-36028-001 - page 90

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide 3. At the FTP prompt, type binary. A confirm message will display. 4. Use Get to backup the files and Put to restore files. Backup: At the FTP prompt, use the get command to transfer the required files from the SpectraLink 8000 Telephony Gateway to the server: get config.bin . Restore: At t ...

  • Polycom 1725-36028-001 - page 91

    19 Troubleshooting via the System Status Menu Troubleshooting requires full inform ation about the components of the SpectraLink 8000 System and the larger syste m, which includes both the host telephone system and the LAN. SpectraLink 8000 Telephony Gateways provide a “windo w” into the functioning of the various wireless components via the Sy ...

  • Polycom 1725-36028-001 - page 92

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Access Point Status : Sho ws information about the APs that have been utilized by the handsets. Error Status : Displays alarm and error message information. Network Status : Displays information about the Ethernet network to which the SpectraLink 8000 Telephony Gateway is connected. Telepho ...

  • Polycom 1725-36028-001 - page 93

    Troubleshooti ng vi a the System Status Menu Access Point Status During a call, handsets send information about their APs to the SpectraLink 8000 Telephony Gateway. The SpectraLink 8000 Telephony Gateway maintains info rmation on the last 16 A Ps on which it has received reports and displays this information on the Access Point Status screen. Your ...

  • Polycom 1725-36028-001 - page 94

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Last Heard and System Uptime indicates that the AP has not been used recently which might indicate that there has been a break in communications. System Uptime : Is the time elapsed since the Sp ectraLink 8000 Telephony Gateway was last reset or power cycled. This indicator allows you to ch ...

  • Polycom 1725-36028-001 - page 95

    Troubleshooti ng vi a the System Status Menu The tables on the following pages display the list of alarm ty pes, display messages, and description of the error. Alarm Message Error Descri ption Action Config GW software version difference Conflicting software versions on two SpectraLink 8000 Telephony Gateways Upgrade the down rev. Config No IP add ...

  • Polycom 1725-36028-001 - page 96

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Alarm Message Error Description Action DAA PBX table unavailable Bad software load on SpectraLink 8000 Telephony Gateway Call Polycom Customer Service. DAA PBX type unavailable Bad software load on SpectraLink 8000 Telephony Gateway DAA DAA type Mismatch Installed PBX interface cannot be us ...

  • Polycom 1725-36028-001 - page 97

    Troubleshooti ng vi a the System Status Menu Alarm Message Error Description Action Line Sync Line [XX] out of sync (where XX is 1-16) The line from the host telephone system is not communicating with the SpectraLink 8000 Telephony Gateway. Check cabling from telephone system to SpectraLink 8000 Telephony Gateway. Check PBX type to be sure it is co ...

  • Polycom 1725-36028-001 - page 98

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Alarm Message Error Description Action Note: Radio alarms usually indicate internal softwar e errors. Usually there will be no external indication of a problem. Radio Invalid Free Level Internal software error Call Polycom Customer Service. Radio No IP Address Internal software error Radio ...

  • Polycom 1725-36028-001 - page 99

    Troubleshooti ng vi a the System Status Menu Network Status The SpectraLink 8000 Telephony Gateway is connected to the Ethernet network, referred to as the LAN or Local Area Network. The information about that connection is provided through the Network Status screen. From the System St atus Menu , select Network Sta tus . The screen displays inform ...

  • Polycom 1725-36028-001 - page 100

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide The rest of the display is a table of Ethernet statistics. The Pkt s and UserPkts columns list the count of Ethernet packets received or transmitted. The Bytes column is the count of bytes received or transmitted during the amount of time indicated by Stats Time . Data is transmitted over t ...

  • Polycom 1725-36028-001 - page 101

    Troubleshooti ng vi a the System Status Menu Missed Slots : Occurs when the SpectraLink 8000 Telephony Gateway does not have sufficient time to pr ocess audio. This number should always be 0 or 1. Buffer Overflow : Number of times Ethernet controller received more packets than it had buffers to stor e them. Indicates extreme traffic. Telephone Line ...

  • Polycom 1725-36028-001 - page 102

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Name : Person or name associated with the line for identification purposes. Extension : Extension number associated wi th the line for identification purposes. Status : Status of the lines from the host telephone system (PBX) to the SpectraLink 8000 Telephony Gateway. In Sync : Indicates th ...

  • Polycom 1725-36028-001 - page 103

    Troubleshooti ng vi a the System Status Menu WT MAC : The MAC address of the handset. Current AP : The MAC address of the AP the handset is using or last used. If the handset is not checked in, the Spectr aLink 8000 Telephony Gateway will display ‘none’. The handset computes the “rate” for the following statistics by calculating the number ...

  • Polycom 1725-36028-001 - page 104

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide 104 PN: 1725-36028-001_T.doc Software Version Num Calls : The number of currently acti ve calls on the SpectraLink 8000 Telephony Gateway. Max Simul Calls : The ma ximum number of simultaneous active calls on the SpectraLink 8000 Telephony Gateway. Each SpectraLink 8000 Telephony Gateway an ...

  • Polycom 1725-36028-001 - page 105

    Wireless Device Planning Worksheet Copy and complete this worksheet to track parameters for each SpectraLink 8000 Telephony Gateway. SpectraLink 8000 Telephony Gatewa y Host name: _______________ ______________ ___________ ___________ MAC: _____ __________ ___________ __________ IP A ddress: __________ ___________ ___________ __ Subnet Mask: ______ ...

  • Polycom 1725-36028-001 - page 106

    106 PN: 1725-36028-001_T.doc aLink 8000 Telephony Gateway A dministrati on Guide 14 15 16 Spectr ...

  • Polycom 1725-36028-001 - page 107

    Safety Notices Important Safety Information Follow these general precaution s while installing telephone equipment: • Never install telephone wiring during a lightning storm. • Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. • Never touch uninsulated telephon e wires or terminals unle ...

  • Polycom 1725-36028-001 - page 108

    ...

  • Polycom 1725-36028-001 - page 109

    Index A Access point Configuration ................................................... 39 Description ........................................................ 12 Status .................................................................87 Administration Console Navigation ..................42 Alarms ................................................... ...

  • Polycom 1725-36028-001 - page 110

    SpectraLink 8000 Tel ep hony Gateway Administrati on Guide Description ........................................................ 10 T Telephone Line Status .......................................... 95 Telephone Lines, configur ation of ...................... 63 Telephone System, connecting to ....................... 23 Telnet ...................... ...

Manufacturer Polycom Category Server

Documents that we receive from a manufacturer of a Polycom 1725-36028-001 can be divided into several groups. They are, among others:
- Polycom technical drawings
- 1725-36028-001 manuals
- Polycom product data sheets
- information booklets
- or energy labels Polycom 1725-36028-001
All of them are important, but the most important information from the point of view of use of the device are in the user manual Polycom 1725-36028-001.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Polycom 1725-36028-001, service manual, brief instructions and user manuals Polycom 1725-36028-001. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Polycom 1725-36028-001.

Similar manuals

A complete manual for the device Polycom 1725-36028-001, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Polycom 1725-36028-001 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Polycom 1725-36028-001.

A complete Polycom manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Polycom 1725-36028-001 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Polycom 1725-36028-001, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Polycom 1725-36028-001, that we can find in the current document
3. Tips how to use the basic functions of the device Polycom 1725-36028-001 - which should help us in our first steps of using Polycom 1725-36028-001
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Polycom 1725-36028-001
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Polycom 1725-36028-001 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Polycom 1725-36028-001?

Use the form below

If you did not solve your problem by using a manual Polycom 1725-36028-001, ask a question using the form below. If a user had a similar problem with Polycom 1725-36028-001 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)